def LEDHolder(LEDDia = 5.5,
thick=1.5,
tol = 0.5,
L=15,
W=20):
od = LEDDia+4
DLUtils.DeleteMesh("Sphere1")
DLUtils.DeleteMesh("Sphere2")
DLUtils.DeleteMesh("Base")
DLUtils.DrawCylinder("LEDHole",LEDDia,0,10,64)
DLUtils.MoveObject("LEDHole",mathutils.Vector((0,0,4.5)))
DLUtils.DrawCylinder("LEDHole2",LEDDia+1,0,6,64)
DLUtils.MoveObject("LEDHole2",mathutils.Vector((0,0,-3)))
DLUtils.DrawBox("Base",L,1,W)
DLUtils.MoveObject("Base",mathutils.Vector([0,-od/2,0]))
DLUtils.DrawSphere("Sphere1",od,16)
DLUtils.MoveObject("Sphere1",mathutils.Vector([0,0,L/4]))
DLUtils.DrawSphere("Sphere2",od,32)
DLUtils.MoveObject("Sphere2",mathutils.Vector([0,0,-L/4]))
DLUtils.ConvexHull(["Sphere1","Sphere2","Base"])
DLUtils.BooleanMesh("Convex Hull","LEDHole","DIFFERENCE",True)
DLUtils.BooleanMesh("Convex Hull","LEDHole2","DIFFERENCE",True)
DLUtils.DeleteMesh("Sphere1")
DLUtils.DeleteMesh("Sphere2")
DLUtils.DeleteMesh("Base")
def Rotor(rotorName,hubDia,rotorDia,hubHeight,hubThickness,axleDia,\
camber_root,camber_tip,camber_position,thickness,\
bladeHeight,twistAngle,rootChord,\
tipChord,clearance,centerOfTwist,nspan,\
npts,rootAngle,nRotorBlades):
res = 64
#Delete any existing hubs
# remove mesh Hub
DLUtils.DeleteMesh(rotorName)
#Generate Hub
bpy.ops.mesh.primitive_cylinder_add(vertices=res,radius=hubDia/2,depth=hubHeight,location=(0,0,0))
cyl = bpy.data.objects["Cylinder"]
cyl.name = rotorName
cyl.data.name = rotorName
bpy.ops.transform.rotate(value=math.radians(90),axis=(0.0,1.0,0.0))
#Generate all Blades
for i in range(0,nRotorBlades):
#Generate blade
TurboMachLib.NACA4Blade("RotorBlade"+str(i),camber_root,camber_tip,camber_position,thickness, bladeHeight, twistAngle,rootChord,tipChord, centerOfTwist, nspan,npts)
#Grab the mesh
me = bpy.data.meshes["RotorBlade"+str(i)]
#We want to rotate the blades (twist angle of the root), so generate the rotation matrix
R = mathutils.Matrix.Rotation(math.radians(rootAngle),3,(0,0,1))
#Shift and rotate the verts
for v in me.vertices:
v.co += mathutils.Vector((0,0,hubDia/2.5))
v.co = R*v.co
#Deselect all
bpy.ops.object.select_all(action='DESELECT')
#Grab the blade object
ob = bpy.data.objects["RotorBlade"+str(i)]
ob.delta_location = [hubThickness/2,0,0]
DLUtils.SelectOnly("RotorBlade"+str(i))
#Remove doubles
print("RemoveDoubles: RotorBlade"+str(i))
bpy.ops.object.editmode_toggle()
bpy.ops.mesh.remove_doubles()
bpy.ops.object.editmode_toggle()
#Rotate the blade to it's proper position
bpy.ops.transform.rotate(value=i*math.pi*2/nRotorBlades,axis=(1.0,0.0,0.0))
#Boolean union the blades to the hub
print("Boolean: RotorBlade"+str(i))
DLUtils.BooleanMesh(rotorName,"RotorBlade"+str(i),"UNION",False)
#clean up!
for n in range(0,nRotorBlades):
DLUtils.DeleteMesh("RotorBlade"+str(n))
axelName = "AxleHole"
DLUtils.DeleteMesh(axelName)
rimThickness = 1.25
rimDepth = 2
#Hollow out hub
DLUtils.DrawCylinder("cutout",hubDia-hubThickness*2,0,hubHeight,res)
bpy.data.objects["cutout"].delta_rotation_euler = [0,math.pi/2,0]
bpy.data.objects["cutout"].delta_location = [hubThickness+(rimDepth+hubThickness),0,0]
DLUtils.BooleanMesh(rotorName,"cutout","DIFFERENCE",True)
DLUtils.DrawCylinder("cutout",hubDia-hubThickness*4,0,hubHeight,res)
bpy.data.objects["cutout"].delta_rotation_euler = [0,math.pi/2,0]
bpy.data.objects["cutout"].delta_location = [hubThickness,0,0]
DLUtils.BooleanMesh(rotorName,"cutout","DIFFERENCE",True)
#Generate axle hole extrusion
DLUtils.DrawCylinder(axelName,axleDia+hubThickness*2,0,hubHeight-hubThickness*2,res)
bpy.data.objects[axelName].delta_location = [-hubThickness*0.9,0,0]
bpy.data.objects[axelName].delta_rotation_euler = [0,math.pi/2,0]
DLUtils.BooleanMesh(rotorName,axelName,"UNION",True)
#Generate hole for axle
DLUtils.DrawCylinder(axelName,axleDia,0,hubHeight*2,res)
bpy.data.objects[axelName].delta_rotation_euler = [0,math.pi/2,0]
DLUtils.BooleanMesh(rotorName,axelName,"DIFFERENCE",True)
#Trim Blades
DLUtils.DrawCylinder("cutBlades",rotorDia-clearance*2,0,hubHeight*2,res)
bpy.data.objects["cutBlades"].delta_rotation_euler = [0,math.pi/2,0]
DLUtils.BooleanMesh(rotorName,"cutBlades","INTERSECT",True)
#Draw inside spokes
ri= (axleDia+hubThickness*2)/2
ro= hubDia/2
nSpokes=7
for i in range(0,nSpokes):
DLUtils.DrawBox("spoke"+str(i),hubHeight-hubThickness*2.5,hubThickness,ro-ri)
DLUtils.ShiftVerts("spoke"+str(i),mathutils.Vector((-hubThickness*0.9,0,(ri+(ro-ri)/2)*0.9)))
#Rotate the spoke to it's proper position
bpy.ops.transform.rotate(value=i*math.pi*2/nSpokes,axis=(1.0,0.0,0.0))
DLUtils.BooleanMesh(rotorName,"spoke"+str(i),"UNION",True)
#Ream out the rim for the hub cone
DLUtils.DrawCylinder("rimCut",hubDia+1,hubDia-2*rimThickness,rimDepth+1,res)
bpy.data.objects["rimCut"].delta_rotation_euler = [0,math.pi/2,0]
DLUtils.MoveObject("rimCut",mathutils.Vector([-(hubHeight/2-rimDepth/2),0,0]))
#remove doubles to prevent errors
DLUtils.SelectOnly("rimCut")
bpy.ops.object.editmode_toggle()
bpy.ops.mesh.remove_doubles()
bpy.ops.object.editmode_toggle()
DLUtils.SelectOnly(rotorName)
bpy.ops.object.editmode_toggle()
bpy.ops.mesh.remove_doubles()
bpy.ops.object.editmode_toggle()
#ream it
DLUtils.BooleanMesh(rotorName,"rimCut","DIFFERENCE",True)
def Stator(ductID=64,ductThickness=2,ductLength=60,res=64,\
mountFaceXLoc=20,mountCanID=28.8,mountCanLength=20,\
nBlades=1,rootAngle=0,camberRoot=6,camberTip=6,camber_position=50,\
bladeThickness=6,bladeHeight=50,twistAngle=5,rootChord=10,\
tipChord=10,centerOfTwist=[50,0],nspan=5,npts=25,screwHoleDia=2.6,screwHoleSpreadDia=16,shaftHoleDia=9):
#Names we are going to use, we are going to clean up first
ductName = "duct"
mountName= "can"
bladeName= "blade"
DLUtils.DeleteMesh(ductName)
DLUtils.DeleteMesh(mountName)
DLUtils.DeleteMesh(mountName+"Inside")
for i in range(0,nBlades):
DLUtils.DeleteMesh(bladeName+str(i))
#Draw duct
DLUtils.DrawCylinder(ductName,ductID+ductThickness*2,ductID,ductLength,res)
DLUtils.SelectOnly(ductName)
bpy.ops.transform.rotate(value=math.radians(90),axis=(0.0,1.0,0.0))
#Draw duct tabs
tabLength = 36.8
tabWidth = 11
tabHeight = 1.5
DLUtils.DrawBox("tab1", tabLength,tabWidth,tabHeight)
DLUtils.DrawBox("tab2", tabLength,tabWidth,tabHeight)
DLUtils.MoveObject("tab1",mathutils.Vector([0,ductID/2+tabWidth/2 + ductThickness/2,0]))
DLUtils.MoveObject("tab2",mathutils.Vector([0,-(ductID/2+tabWidth/2 + ductThickness/2),0]))
DLUtils.BooleanMesh(ductName,"tab1","UNION",True)
DLUtils.BooleanMesh(ductName,"tab2","UNION",True)
#Draw mount can
DLUtils.DrawCylinder(mountName,mountCanID+ductThickness*2,0,mountCanLength,res)
DLUtils.DrawCylinder(mountName+"Inside",mountCanID,0,mountCanLength,res)
bpy.data.objects[mountName+"Inside"].delta_location = [0,0,ductThickness]
#Cut out the can interior
DLUtils.BooleanMesh(mountName,mountName+"Inside","DIFFERENCE",True)
#Cut out mount and shaft holes
DLUtils.DrawCylinder("shaftHole",shaftHoleDia,0,mountCanLength*2,res)
bpy.data.objects["shaftHole"].delta_location = [0,0,0]
DLUtils.BooleanMesh(mountName,"shaftHole","DIFFERENCE",True)
#ewHoleDia=2.5,screwHoleSpreadDia=16,shaftHoleDia=8):
for i in range(0,4):
DLUtils.DrawCylinder("screwHole",screwHoleDia,0,mountCanLength*2,res)
bpy.data.objects["screwHole"].delta_location = [screwHoleSpreadDia/2*math.cos(i*math.pi*2/4),screwHoleSpreadDia/2*math.sin(i*math.pi*2/4),0]
DLUtils.BooleanMesh(mountName,"screwHole","DIFFERENCE",True)
#Rotate the mount horizontally
DLUtils.SelectOnly(mountName)
bpy.ops.transform.rotate(value=math.radians(90),axis=(0.0,1.0,0.0))
#Add box to cut out wire hole
DLUtils.DrawBox("wireBox", 15,10,15)
bpy.data.objects["wireBox"].delta_location = [mountCanLength/2-2,-mountCanID/2,0]
#DLUtils.MoveObject("wireBox",mathutils.Vector([mountCanLength-7,-mountCanID/2,0]))
DLUtils.BooleanMesh(mountName,"wireBox","DIFFERENCE",True)
for i in range(0,nBlades):
#Generate blade
TurboMachLib.NACA4Blade(bladeName+str(i),camberRoot, camberTip,camber_position,bladeThickness, bladeHeight, twistAngle,rootChord,tipChord, centerOfTwist, nspan,npts)
#Grab the mesh
me = bpy.data.meshes[bladeName+str(i)]
#We want to rotate the blades (twist angle of the root), so generate the rotation matrix
R = mathutils.Matrix.Rotation(math.radians(rootAngle),3,(0,0,1))
#Shift and rotate the verts
for v in me.vertices:
v.co += mathutils.Vector((0,0,mountCanID/2))
v.co = R*v.co
#Deselect all
bpy.ops.object.select_all(action='DESELECT')
#Grab the blade object
ob = bpy.data.objects[bladeName+str(i)]
ob.delta_location = [ductThickness/2,0,0]
#ensure it is selected
ob.select = True
#Remove doubles
print("RemoveDoubles: "+bladeName+str(i))
bpy.ops.object.editmode_toggle()
bpy.ops.mesh.remove_doubles()
bpy.ops.object.editmode_toggle()
#Rotate the blade to it's proper position
bpy.ops.transform.rotate(value=i*math.pi*2/nBlades,axis=(1.0,0.0,0.0))
#Boolean union the blades to the hub
print("Boolean: blade"+str(i))
#DLUtils.BooleanMesh(ductName,bladeName+str(i),"UNION",False)
#Add inside blade cut
DLUtils.DrawCylinder("bladeCut",mountCanID+ductThickness,0,mountCanLength,res)
DLUtils.SelectOnly("bladeCut")
bpy.ops.transform.rotate(value=math.radians(90),axis=(0.0,1.0,0.0))
for i in range(0,nBlades):
DLUtils.BooleanMesh(bladeName+str(i),"bladeCut","DIFFERENCE",False)
DLUtils.BooleanMesh(mountName,bladeName+str(i),"UNION",True)
#Delete "BladeCut"
DLUtils.DeleteMesh("bladeCut")
#Add outside blade Cut
DLUtils.DrawCylinder("bladeCut",ductID+ductThickness,0,ductLength,res)
DLUtils.SelectOnly("bladeCut")
bpy.ops.transform.rotate(value=math.radians(90),axis=(0.0,1.0,0.0))
#cut the outside of the blades
DLUtils.BooleanMesh(mountName,"bladeCut","INTERSECT",True)
#Move the can to the mountFaceXLoc
bpy.data.objects[mountName].delta_location = [mountCanLength/2-ductLength/2+mountFaceXLoc,0,0]
#Union the can and the duct
DLUtils.BooleanMesh(ductName,mountName,"UNION",True)
LEDHolder()
def Propeller(propName,propDia,pitch,\
hubHeight,hubDia,axleDia,\
PropellerProps,\
bladeTransition,nspan,npts,nBlades):
p = PropellerProps
res = 64 #used to define cylinder resolution.
#initialising arrays we'll need.
verts = []
tmpVerts = []
tmpVert = [0, 0, 0]
faces = []
origin = (0, 0, 0)
centerOfTwist = [0, 0]
p.rootSlope *= math.pi / 180
p.transitionSlope *= math.pi / 180
p.tipSlope *= math.pi / 180
p.rootSkewSlope *= math.pi / 180
p.transitionSkewSlope *= math.pi / 180
p.tipSkewSlope *= math.pi / 180
#An array of the chord lengths at each span point
chordArray = []
#An array of the NACA4 digits at each span point.
NACAArray = []
#An array that holds the position along the blade span of the airfoil cross-sections
sPos = []
#An array that holds the amount of skew of each airfoil cross-section
skew = []
#Blade root will be at center of rotation.
bladeHeight = propDia / 2
bladeLen = bladeHeight - bladeTransition
dSpan = bladeHeight / nspan
lastI = 0
for i in range(0, nspan + 1):
span = i * dSpan
if (span < bladeTransition):
#Using cubic spline interpolation.
t = span / bladeTransition
tm1 = 1 - t
#root to transition point interpolation
y1 = p.rootChord
y2 = p.rootChord + math.sin(p.rootSlope) * p.rootStrength
y3 = p.transitionChord - math.sin(
p.transitionSlope) * p.transitionStrengthRoot
y4 = p.transitionChord
chord = pow(tm1, 3) * y1 + 3 * pow(
tm1, 2) * t * y2 + 3 * tm1 * pow(t, 2) * y3 + pow(t, 3) * y4
chordArray.append(chord)
x1 = 0
x2 = math.cos(p.rootSlope) * p.rootStrength
x3 = (bladeTransition -
math.cos(p.transitionSlope) * p.transitionStrengthRoot)
x4 = bladeTransition
x = pow(tm1, 3) * x1 + 3 * pow(tm1, 2) * t * x2 + 3 * tm1 * pow(
t, 2) * x3 + pow(t, 3) * x4
sPos.append(x)
y1 = p.rootThick
y2 = p.rootThick + math.sin(p.rootThickSlope) * p.rootThickStrength
y3 = p.transitionThick - math.sin(
p.transitionThickSlope) * p.transitionThickStrengthRoot
y4 = p.transitionThick
thickPt = pow(tm1, 3) * y1 + 3 * pow(
tm1, 2) * t * y2 + 3 * tm1 * pow(t, 2) * y3 + pow(t, 3) * y4
print(thickPt)
NACAArray.append([
5, 3,
int(thickPt * 10),
int(thickPt * 100 - int(thickPt * 10) * 10)
])
y1 = p.rootSkew
y2 = p.rootSkew + math.sin(p.rootSkewSlope) * p.rootSkewStrength
y3 = p.transitionSkew - math.sin(
p.transitionSkewSlope) * p.transitionSkewStrengthRoot
y4 = p.transitionSkew
skewPt = pow(tm1, 3) * y1 + 3 * pow(
tm1, 2) * t * y2 + 3 * tm1 * pow(t, 2) * y3 + pow(t, 3) * y4
skew.append(skewPt)
else:
#Using cubic spline interpolation.
t = (span - bladeTransition) / bladeLen
tm1 = 1 - t
y1 = p.transitionChord
y2 = p.transitionChord + math.sin(
p.transitionSlope) * p.transitionStrengthTip
y3 = p.tipChord - math.sin(p.tipSlope) * p.tipStrength
y4 = p.tipChord
chord = pow(tm1, 3) * y1 + 3 * pow(
tm1, 2) * t * y2 + 3 * tm1 * pow(t, 2) * y3 + pow(t, 3) * y4
chordArray.append(chord)
x1 = 0
x2 = math.cos(p.transitionSlope) * p.transitionStrengthTip
x3 = (bladeLen - math.cos(p.tipSlope) * p.tipStrength)
x4 = bladeLen
x = pow(tm1, 3) * x1 + 3 * pow(tm1, 2) * t * x2 + 3 * tm1 * pow(
t, 2) * x3 + pow(t, 3) * x4
sPos.append(bladeTransition + x)
y1 = p.transitionThick
y2 = p.transitionThick + math.sin(
p.rootThickSlope) * p.rootThickStrength
y3 = p.tipThick - math.sin(
p.transitionThickSlope) * p.transitionThickStrengthTip
y4 = p.tipThick
thickPt = pow(tm1, 3) * y1 + 3 * pow(
tm1, 2) * t * y2 + 3 * tm1 * pow(t, 2) * y3 + pow(t, 3) * y4
NACAArray.append([
5, 3,
int(thickPt * 10),
int(thickPt * 100 - int(thickPt * 10) * 10)
])
y1 = p.transitionSkew
y2 = p.transitionSkew + math.sin(
p.transitionSkewSlope) * p.transitionSkewStrengthTip
y3 = p.tipSkew - math.sin(p.tipSkewSlope) * p.tipSkewStrength
y4 = p.tipSkew
skewPt = pow(tm1, 3) * y1 + 3 * pow(
tm1, 2) * t * y2 + 3 * tm1 * pow(t, 2) * y3 + pow(t, 3) * y4
skew.append(skewPt)
#error check of inputs
if (len(chordArray) != nspan or len(NACAArray) != nspan):
print(
"The size of the array of chord lengths or the array of airfoil NACA digits does not match the number of span points used to define the blade geometry."
)
#Delete any existing prop geoms
DLUtils.DeleteMesh(propName)
#Generate Hub
DLUtils.DrawCylinder("Hub", hubDia, 0, hubHeight,
res) #use a 0.001m tolerance which we'll trim off.
cyl = bpy.data.objects["Hub"]
cyl.name = propName
cyl.data.name = propName
DLUtils.SelectOnly(propName)
bpy.ops.transform.rotate(value=math.radians(90), axis=(0.0, 1.0, 0.0))
DLUtils.MoveObject(propName, [2.0, 0, 0])
areaArray = []
#Generate vertex coordinates with twist and scale along the span
for i in range(0, nspan + 1):
span = sPos[i] #i*dSpan
if (span == 0):
twistAngle = 0
elif (span < bladeTransition):
twistAngle = math.atan(
pitch / (2 * math.pi * span)) * span / bladeTransition
else:
twistAngle = math.atan(pitch / (2 * math.pi * span))
#get the airfoil profile vertices
tmpVerts = TurboMachLib.NACA4Profile(camber=NACAArray[i][0],
thickness=NACAArray[i][2] * 10 +
NACAArray[i][3],
camberPos=NACAArray[i][1] * 10,
chord=chordArray[i],
npts=npts)
areaArray.append(0)
centerOfTwist[0] = chordArray[i] * skew[i]
#centerOfTwist[1] = raiseFoil
for v in range(0, len(tmpVerts)):
#shift all verts for twisting
tmpVerts[v][0] -= centerOfTwist[0]
tmpVerts[v][1] -= centerOfTwist[1]
#Twist the airfoil vertices. First we shift them to get the desired center of rotation.
tmpVert[0] = tmpVerts[v][0] * math.cos(
twistAngle) - tmpVerts[v][1] * math.sin(twistAngle)
tmpVert[1] = tmpVerts[v][0] * math.sin(
twistAngle) + tmpVerts[v][1] * math.cos(twistAngle)
#shift all verts to their proper span location in Z
tmpVert[
2] = span + 0.01 * bladeHeight #Shift blade by 1% of blade height to prevent poor boolean ops
#append the vert to the master vertex list
verts.append((tmpVert[0], tmpVert[1], tmpVert[2]))
if (v != 0):
dx = abs(verts[len(verts) - 1][0] - verts[len(verts) - 2][0])
dy = abs(verts[len(verts) - 1][1] +
verts[len(verts) - 2][1]) / 2
areaArray[i] += dy * dx
#Generate Polies from vertex IDs
#Bottom Cap
faces.append((0, 1, npts))
for i in range(1, npts - 1):
faces.append((i, i + 1, npts + i))
faces.append((i, npts + i, npts + i - 1))
#Middle
nPerStage = npts * 2 - 1
for j in range(0, nspan):
#Top Side
for i in range(0, npts - 1):
faces.append((nPerStage * j + i, nPerStage * (j + 1) + i,
nPerStage * (j + 1) + i + 1))
faces.append((nPerStage * j + i, nPerStage * (j + 1) + i + 1,
nPerStage * j + i + 1))
#First strip for bottom side (hooks to verts from top side)
faces.append(
(nPerStage * j, nPerStage * (j + 1) + npts, nPerStage * (j + 1)))
faces.append(
(nPerStage * j, nPerStage * j + npts, nPerStage * (j + 1) + npts))
#Rest of bottom side
for i in range(0, npts - 2):
faces.append(
(nPerStage * j + i + npts, nPerStage * (j + 1) + i + npts + 1,
nPerStage * (j + 1) + i + npts))
faces.append(
(nPerStage * j + i + npts, nPerStage * j + i + npts + 1,
nPerStage * (j + 1) + i + npts + 1))
#Back face
faces.append((nPerStage * j + npts - 1, nPerStage * (j + 1) + npts - 1,
nPerStage * (j + 1) + npts * 2 - 2))
faces.append(
(nPerStage * j + npts - 1, nPerStage * (j + 1) + npts * 2 - 2,
nPerStage * (j) + npts * 2 - 2))
#Top Cap
faces.append((nPerStage * (nspan), nPerStage * (nspan) + 1,
nPerStage * (nspan) + npts))
for i in range(1, npts - 1):
faces.append((nPerStage * (nspan) + i, nPerStage * (nspan) + npts + i,
nPerStage * (nspan) + i + 1))
faces.append(
(nPerStage * (nspan) + i, nPerStage * (nspan) + npts + i - 1,
nPerStage * (nspan) + npts + i))
#Create Blender object for the blade
dAngle = 360.0 / nBlades
for i in range(0, nBlades):
print("Draw Blade_" + str(i))
blade = DLUtils.createMesh("Blade_" + str(i), origin, verts, [], faces)
DLUtils.SelectOnly("Blade_" + str(i))
bpy.ops.transform.rotate(value=math.radians(90), axis=(0.0, 0.0, 1.0))
bpy.ops.transform.rotate(value=math.radians(dAngle) * i,
axis=(1.0, 0.0, 0.0))
#Union the blades to the hub
for i in range(0, nBlades):
print("Union: Blade_" + str(i))
DLUtils.BooleanMesh(propName, "Blade_" + str(i), "UNION", True)
#trim the blades to hub height
DLUtils.DrawBox("box", hubDia * 1.1, hubDia * 1.1, hubDia * 1.1)
DLUtils.MoveObject("box", [propDia / 2 + hubHeight / 2 + 0.001, 0, 0])
DLUtils.BooleanMesh(propName, "box", "DIFFERENCE", True)
#cut the axle hole
DLUtils.DrawCylinder("hole", axleDia, 0, hubHeight * 2, res)
DLUtils.SelectOnly("hole")
bpy.ops.transform.rotate(value=math.radians(90), axis=(0.0, 1.0, 0.0))
DLUtils.BooleanMesh(propName, "hole", 'DIFFERENCE', True)
#Cut room for the axle shive
DLUtils.DrawCylinder("ShiveHole", (hubDia - axleDia) / 4 + axleDia, 0,
hubHeight / 1.5, res)
DLUtils.SelectOnly("ShiveHole")
bpy.ops.transform.rotate(value=math.radians(90), axis=(0.0, 1.0, 0.0))
DLUtils.BooleanMesh(propName, "ShiveHole", 'DIFFERENCE', True)
#DLUtils.MoveObject(propName,[2.0,0,0])
#trim the blades to the proper dia
DLUtils.DrawCylinder("BladeTrim", propDia, 0, propDia, 256)
DLUtils.SelectOnly("BladeTrim")
bpy.ops.transform.rotate(value=math.radians(90), axis=(0.0, 1.0, 0.0))
DLUtils.BooleanMesh(propName, "BladeTrim", 'INTERSECT', True)
#done!
print((BladeAxialStress(sPos, areaArray, 40e6, 1300, 15000)))
return
