def Activated(self):
mw = FreeCADGui.getMainWindow()
# Grab our code editor so we can interact with it
cqCodePane = Shared.getActiveCodePane()
# If there's nothing open in the code pane, we don't need to close it
if cqCodePane is None or len(cqCodePane.file.path) == 0:
return
# Check to see if we need to save the script
if cqCodePane.dirty:
reply = QtGui.QMessageBox.question(cqCodePane, "Save CadQuery Script", "Save script before closing?",
QtGui.QMessageBox.Yes | QtGui.QMessageBox.No | QtGui.QMessageBox.Cancel)
if reply == QtGui.QMessageBox.Cancel:
return
if reply == QtGui.QMessageBox.Yes:
# If we've got a file name already save it there, otherwise give a save-as dialog
if len(cqCodePane.file.path) == 0:
filename = QtGui.QFileDialog.getSaveFileName(mw, mw.tr("Save CadQuery Script As"), "/home/",
mw.tr("CadQuery Files (*.py)"))
else:
filename = cqCodePane.file.path
# Make sure we got a valid file name
if filename is not None:
ExportCQ.save(filename)
Shared.closeActiveCodeWindow()
def Activated(self):
#So we can open the save-as dialog
mw = FreeCADGui.getMainWindow()
cqCodePane = mw.findChild(QtGui.QPlainTextEdit, "cqCodePane")
#Try to keep track of the previous path used to open as a convenience to the user
if self.previousPath is None:
self.previousPath = "/home/"
filename = QtGui.QFileDialog.getSaveFileName(mw, mw.tr("Save CadQuery Script As"), self.previousPath,
mw.tr("CadQuery Files (*.py)"))
self.previousPath = filename[0]
#Make sure the user didn't click cancel
if filename[0]:
#Close the 3D view for the original script if it's open
try:
docname = os.path.splitext(os.path.basename(cqCodePane.file.path))[0]
FreeCAD.closeDocument(docname)
except:
#Assume that there was no 3D view to close
pass
#Save the file before closing the original and the re-rendering the new one
ExportCQ.save(filename[0])
CadQueryExecuteScript().Activated()
def Activated(self):
# So we can open the save-as dialog
mw = FreeCADGui.getMainWindow()
cqCodePane = Shared.getActiveCodePane()
if cqCodePane == None:
FreeCAD.Console.PrintError("Nothing to save.\r\n")
return
# Try to keep track of the previous path used to open as a convenience to the user
if self.previousPath is None:
self.previousPath = "/home/"
filename = QtGui.QFileDialog.getSaveFileName(mw, mw.tr("Save CadQuery Script As"), self.previousPath,
mw.tr("CadQuery Files (*.py)"))
self.previousPath = filename[0]
# Make sure the user didn't click cancel
if filename[0]:
# Close the 3D view for the original script if it's open
try:
docname = os.path.splitext(os.path.basename(cqCodePane.file.path))[0]
FreeCAD.closeDocument(docname)
except:
# Assume that there was no 3D view to close
pass
# Change the name of our script window's tab
Shared.setActiveWindowTitle(os.path.basename(filename[0]))
# Save the file before closing the original and the re-rendering the new one
ExportCQ.save(filename[0])
CadQueryExecuteScript().Activated()
def Activated(self):
#So we can open the save-as dialog
mw = FreeCADGui.getMainWindow()
cqCodePane = mw.findChild(QtGui.QPlainTextEdit, "cqCodePane")
#Try to keep track of the previous path used to open as a convenience to the user
if self.previousPath is None:
self.previousPath = "/home/"
filename = QtGui.QFileDialog.getSaveFileName(mw, mw.tr("Save CadQuery Script As"), self.previousPath,
mw.tr("CadQuery Files (*.py)"))
self.previousPath = filename[0]
#Make sure the user didn't click cancel
if filename[0]:
#Close the 3D view for the original script if it's open
try:
docname = os.path.splitext(os.path.basename(cqCodePane.file.path))[0]
FreeCAD.closeDocument(docname)
except:
#Assume that there was no 3D view to close
pass
#Save the file before closing the original and the re-rendering the new one
ExportCQ.save(filename[0])
CadQueryExecuteScript().Activated()
def Activated(self):
# Grab our code editor so we can interact with it
cqCodePane = Shared.getActiveCodePane()
# If there are no windows open there is nothing to save
if cqCodePane == None:
FreeCAD.Console.PrintError("Nothing to save.\r\n")
return
# If the code pane doesn't have a filename, we need to present the save as dialog
if len(cqCodePane.file.path) == 0 or os.path.basename(cqCodePane.file.path) == 'script_template.py' \
or os.path.split(cqCodePane.file.path)[-2].endswith('Examples'):
FreeCAD.Console.PrintError(
"You cannot save over a blank file, example file or template file.\r\n"
)
CadQuerySaveAsScript().Activated()
return
# Rely on our export library to help us save the file
ExportCQ.save()
# Execute the script if the user has asked for it
if Settings.execute_on_save:
CadQueryExecuteScript().Activated()
def Activated(self):
# Grab our code editor so we can interact with it
cqCodePane = Shared.getActiveCodePane()
# If there are no windows open there is nothing to save
if cqCodePane == None:
FreeCAD.Console.PrintError("Nothing to save.\r\n")
return
# If the code pane doesn't have a filename, we need to present the save as dialog
if len(cqCodePane.get_path()) == 0 or os.path.basename(cqCodePane.get_path()) == 'script_template.py' \
or os.path.split(cqCodePane.get_path())[0].endswith('FreeCAD'):
FreeCAD.Console.PrintError(
"You cannot save over a blank file, example file or template file.\r\n"
)
CadQuerySaveAsScript().Activated()
return
# Rely on our export library to help us save the file
ExportCQ.save()
# Execute the script if the user has asked for it
if FreeCAD.ParamGet(
"User parameter:BaseApp/Preferences/Mod/cadquery-freecad-module"
).GetBool("executeOnSave"):
CadQueryExecuteScript().Activated()
def Activated(self):
# So we can open the save-as dialog
mw = FreeCADGui.getMainWindow()
cqCodePane = Shared.getActiveCodePane()
if cqCodePane == None:
FreeCAD.Console.PrintError("Nothing to save.\r\n")
return
# Try to keep track of the previous path used to open as a convenience to the user
if self.previousPath is None:
self.previousPath = "/home/"
filename = QtGui.QFileDialog.getSaveFileName(mw, mw.tr("Save CadQuery Script As"), self.previousPath,
mw.tr("CadQuery Files (*.py)"))
self.previousPath = filename[0]
# Make sure the user didn't click cancel
if filename[0]:
# Close the 3D view for the original script if it's open
try:
docname = os.path.splitext(os.path.basename(cqCodePane.get_path()))[0]
FreeCAD.closeDocument(docname)
except:
# Assume that there was no 3D view to close
pass
# Change the name of our script window's tab
Shared.setActiveWindowTitle(os.path.basename(filename[0]))
# Save the file before closing the original and the re-rendering the new one
ExportCQ.save(filename[0])
CadQueryExecuteScript().Activated()
def Activated(self):
mw = FreeCADGui.getMainWindow()
# Grab our code editor so we can interact with it
cqCodePane = Shared.getActiveCodePane()
# If there's nothing open in the code pane, we don't need to close it
if cqCodePane is None or len(cqCodePane.get_path()) == 0:
return
# Check to see if we need to save the script
if cqCodePane.is_dirty():
reply = QtGui.QMessageBox.question(cqCodePane, "Save CadQuery Script", "Save script before closing?",
QtGui.QMessageBox.Yes | QtGui.QMessageBox.No | QtGui.QMessageBox.Cancel)
if reply == QtGui.QMessageBox.Cancel:
return
if reply == QtGui.QMessageBox.Yes:
# If we've got a file name already save it there, otherwise give a save-as dialog
if len(cqCodePane.get_path()) == 0:
filename = QtGui.QFileDialog.getSaveFileName(mw, mw.tr("Save CadQuery Script As"), "/home/",
mw.tr("CadQuery Files (*.py)"))
else:
filename = cqCodePane.get_path()
# Make sure we got a valid file name
if filename is not None:
ExportCQ.save(filename)
Shared.closeActiveCodeWindow()
def Activated(self):
#Getting the main window will allow us to find the children we need to work with
mw = FreeCADGui.getMainWindow()
#We need this so we can load the file into it
cqCodePane = mw.findChild(QtGui.QPlainTextEdit, "cqCodePane")
reply = QtGui.QMessageBox.question(cqCodePane, "QMessageBox.question()", "Save script before closing?",
QtGui.QMessageBox.Yes | QtGui.QMessageBox.No | QtGui.QMessageBox.Cancel)
if reply == QtGui.QMessageBox.Cancel:
return
if reply == QtGui.QMessageBox.Yes:
#If we've got a file name already save it there, otherwise give a save-as dialog
if len(cqCodePane.file.path) == 0:
filename = QtGui.QFileDialog.getSaveFileName(mw, mw.tr("Save CadQuery Script As"), "/home/",
mw.tr("CadQuery Files (*.py)"))
else:
filename = cqCodePane.file.path
#Make sure we got a valid file name
if filename == None:
ExportCQ.save(filename)
#Clear our script and whatever was rendered by it out
cqCodePane.file.close()
clearAll()
def Activated(self):
# Grab our code editor so we can interact with it
mw = FreeCADGui.getMainWindow()
cqCodePane = mw.findChild(QtGui.QPlainTextEdit, "cqCodePane")
# If there's nothing open in the code pane, we don't need to close it
if len(cqCodePane.file.path) == 0:
return
# Check to see if we need to save the script
if cqCodePane.dirty:
reply = QtGui.QMessageBox.question(
cqCodePane,
"Save CadQuery Script",
"Save script before closing?",
QtGui.QMessageBox.Yes | QtGui.QMessageBox.No | QtGui.QMessageBox.Cancel,
)
if reply == QtGui.QMessageBox.Cancel:
return
if reply == QtGui.QMessageBox.Yes:
# If we've got a file name already save it there, otherwise give a save-as dialog
if len(cqCodePane.file.path) == 0:
filename = QtGui.QFileDialog.getSaveFileName(
mw, mw.tr("Save CadQuery Script As"), "/home/", mw.tr("CadQuery Files (*.py)")
)
else:
filename = cqCodePane.file.path
# Make sure we got a valid file name
if filename is not None:
ExportCQ.save(filename)
# Close the matching 3D view if it's open
if cqCodePane.file.path is not None:
docname = os.path.splitext(os.path.basename(cqCodePane.file.path))[0]
try:
FreeCAD.closeDocument(docname)
except:
# Assume that the document has already been closed
pass
# Clear our script and whatever was rendered by it out
cqCodePane.file.close()
def Activated(self):
mw = FreeCADGui.getMainWindow()
#Try to keep track of the previous path used to open as a convenience to the user
if self.previousPath is None:
self.previousPath = "/home/"
filename = QtGui.QFileDialog.getSaveFileName(mw, mw.tr("Save CadQuery Script As"), self.previousPath,
mw.tr("CadQuery Files (*.py)"))
self.previousPath = filename[0]
#Make sure the user didn't click cancel
if filename[0]:
#Save the file before the re-render
ExportCQ.save(filename[0])
execfile(filename[0])
def Activated(self):
#Grab our code editor so we can interact with it
mw = FreeCADGui.getMainWindow()
cqCodePane = mw.findChild(QtGui.QPlainTextEdit, "cqCodePane")
#If there's nothing open in the code pane, we don't need to close it
if len(cqCodePane.file.path) == 0:
return
#Check to see if we need to save the script
if cqCodePane.dirty:
reply = QtGui.QMessageBox.question(
cqCodePane, "Save CadQuery Script",
"Save script before closing?", QtGui.QMessageBox.Yes
| QtGui.QMessageBox.No | QtGui.QMessageBox.Cancel)
if reply == QtGui.QMessageBox.Cancel:
return
if reply == QtGui.QMessageBox.Yes:
#If we've got a file name already save it there, otherwise give a save-as dialog
if len(cqCodePane.file.path) == 0:
filename = QtGui.QFileDialog.getSaveFileName(
mw, mw.tr("Save CadQuery Script As"), "/home/",
mw.tr("CadQuery Files (*.py)"))
else:
filename = cqCodePane.file.path
#Make sure we got a valid file name
if filename is not None:
ExportCQ.save(filename)
#Close the matching 3D view if it's open
if cqCodePane.file.path is not None:
docname = os.path.splitext(os.path.basename(
cqCodePane.file.path))[0]
try:
FreeCAD.closeDocument(docname)
except:
#Assume that the document has already been closed
pass
#Clear our script and whatever was rendered by it out
cqCodePane.file.close()
def Activated(self):
#Grab our code editor so we can interact with it
mw = FreeCADGui.getMainWindow()
cqCodePane = mw.findChild(QtGui.QPlainTextEdit, "cqCodePane")
#If the code pane doesn't have a filename, we need to present the save as dialog
if len(cqCodePane.file.path) == 0 or os.path.basename(cqCodePane.file.path) == 'script_template.py' \
or os.path.split(cqCodePane.file.path)[-2].endswith('Examples'):
FreeCAD.Console.PrintError("You cannot save over a blank file, example file or template file.\r\n")
CadQuerySaveAsScript().Activated()
return
#Rely on our export library to help us save the file
ExportCQ.save()
#Execute the script if the user has asked for it
if Settings.execute_on_save:
CadQueryExecuteScript().Activated()
def Activated(self):
#Grab our code editor so we can interact with it
mw = FreeCADGui.getMainWindow()
cqCodePane = mw.findChild(QtGui.QPlainTextEdit, "cqCodePane")
#If the code pane doesn't have a filename, we need to present the save as dialog
if len(cqCodePane.file.path) == 0 or os.path.basename(cqCodePane.file.path) == 'script_template.py' \
or os.path.split(cqCodePane.file.path)[-2].endswith('Examples'):
FreeCAD.Console.PrintError("You cannot save over a blank file, example file or template file.\r\n")
CadQuerySaveAsScript().Activated()
return
#Rely on our export library to help us save the file
ExportCQ.save()
#Execute the script if the user has asked for it
if Settings.execute_on_save:
CadQueryExecuteScript().Activated()
def Activated(self):
# Grab our code editor so we can interact with it
cqCodePane = Shared.getActiveCodePane()
# If there are no windows open there is nothing to save
if cqCodePane == None:
FreeCAD.Console.PrintError("Nothing to save.\r\n")
return
# If the code pane doesn't have a filename, we need to present the save as dialog
if len(cqCodePane.get_path()) == 0 or os.path.basename(cqCodePane.get_path()) == 'script_template.py' \
or os.path.split(cqCodePane.get_path())[0].endswith('FreeCAD'):
FreeCAD.Console.PrintError("You cannot save over a blank file, example file or template file.\r\n")
CadQuerySaveAsScript().Activated()
return
# Rely on our export library to help us save the file
ExportCQ.save()
# Execute the script if the user has asked for it
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/cadquery-freecad-module").GetBool("executeOnSave"):
CadQueryExecuteScript().Activated()
def Activated(self):
#Rely on our export library to help us save the file
ExportCQ.save()