def test_change_firmware():
pwd = os.getcwd()
ls = os.listdir(pwd)
if 'FW_15.9.8.2_OR.bin' and 'FW_15.9.8.4_OR.bin' not in ls:
return
status = haap.Status(ip, t_port, passwd, ftp_port)
fw_version = status.get_version()
if fw_version == None:
print("Can't get firmware version.")
return
elif fw_version == 'V15.9.8.4':
haap.change_firmware(ip, 'FW_15.9.8.2_OR.bin')
else:
haap.change_firmware(ip, 'FW_15.9.8.4_OR.bin')
time.sleep(60)
try:
status = haap.Status(ip, t_port, passwd, ftp_port)
fw_version_new = status.get_version()
except:
fw_version_new = None
if fw_version_new:
if fw_version == 'V15.9.8.4':
assert fw_version_new == 'V15.9.8.2'
else:
assert fw_version_new == 'V15.9.8.4'
else:
print("Can't get firmware version.")
def main():
if len(sys.argv) == 1:#用户输入参数是否是本身，如果是
print(strHelp)#打印帮助
#OK
elif sys.argv[1] == 'ptes':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 3:
print(strPTESHelp)
elif sys.argv[2] == 'all':
sw.print_porterror_all_formated()
else:
if s.is_IP(sys.argv[2]):
sw.print_porterror_formated(sys.argv[2])
else:
print('Please provide correct switch ip...')
#OK
elif sys.argv[1] == 'ptcl':#判断执行参数是否为ptcl
num_argv = len(sys.argv) #获取参数的个数
if num_argv == 2 or num_argv > 4:#如果是2个或者大于4个
print(strPTCLHelp) #打印提示信息
elif sys.argv[2] == 'all': #如果是3个参数是 all
sw.clear_all() #调用清除所有交换机端口错误函数
elif s.is_IP(sys.argv[2]):#如果第3个参数是ip的话,判断是不是ip
if num_argv == 4: #判断是否有第4个参数，如果有
#if _isPort(sys.argv[3]): 错误
if s.is_port(sys.argv[3]): #在判断第4个参数是否是正确的端口
sw.clear_one_port(sys.argv[2], sys.argv[3])#调用清除具体ip，端口错误
else:
print('Please provide correct port number...') #请提供正确端口号
else:
print(strPTCLHelp) #打印提示
else:
print('Please provide correct switch ip...')#请提供正确的交换机ip
#OK
elif sys.argv[1] == 'sws':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 3:
print(strSWSHelp)
elif sys.argv[2] == 'all':
sw.print_switchshow_all()
else:
if s.is_IP(sys.argv[2]):
sw.print_switchshow(sys.argv[2])
else:
print('Please provide correct switch ip...')
#OK
elif sys.argv[1] == 'bc':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 3:
print(strBCHelp)
elif sys.argv[2] == 'all':
haap.backup_config_all()
else:
if s.is_IP(sys.argv[2]):
haap.backup_config(sys.argv[2])
else:
print('Please provide correct engine ip...')
# get engines' trace files under TraceFolder based on Trace levels
#trace、primary、seaond
#OK git Trace NOT have Primary
elif sys.argv[1] == 'gt':
num_argv = len(sys.argv)
if num_argv > 3:
trace_level = int(sys.argv[3])
if num_argv == 2 or num_argv > 4:
print(strGTHelp)
elif sys.argv[2] == 'all':
if num_argv > 3:
if s.is_trace_level(trace_level):
haap.get_trace_all(trace_level)
else:
print('Trace level must be "1" or "2" or "3"')
else:
haap.get_trace_all(0)
elif s.is_IP(sys.argv[2]):
if num_argv > 3:
if s.is_trace_level(trace_level):
haap.get_trace(sys.argv[2], trace_level)
else:
print('Trace level must be "1" or "2" or "3"')
else:
haap.get_trace(sys.argv[2], 0)
else:
print('Please provide correct engine ip...')
# elif sys.argv[1] == 'at':
# num_argv = len(sys.argv)
# if num_argv > 3:
# trace_level = sys.argv[3]
# if num_argv == 2 or num_argv > 4:
# print(strPTCLHelp)
# elif sys.argv[2] == 'all':
# if num_argv > 3:
# if s.is_trace_level(trace_level):
# haap.analyse_trace_all(trace_level)
# else:
# print('Trace Level Must Be "1" or "2" or "3"')
# else:
# haap.analyse_trace_all(0)
# elif s.is_IP(sys.argv[2]):
# if num_argv > 3:
# if s.is_trace_level(trace_level):
# haap.analyse_trace(sys.argv[2], trace_level)
# else:
# print('Trace Level Must Be "1" or "2" or "3"')
# else:
# haap.analyse_trace(sys.argv[2], 0)
# else:
# print('Please Provide Correct Engine IP...')
#OK python Main.py at Trace\2019-00-00
elif sys.argv[1] == 'at':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 3:
print(strATHelp)
else:
if s.is_folder(sys.argv[2]):
s.TraceAnalyse(sys.argv[2]).run()
else:
print('Please provide correct trace folder')
#OK python Main.py ec 10.203.1.223 cmd.txt
elif sys.argv[1] == 'ec':
if len(sys.argv) != 4:
print(strECHelp)
else:
ip = sys.argv[2]
command_file = sys.argv[3]
if not s.is_IP(ip):
print('Please provide correct engine ip...')
if not s.is_file(command_file):
print('File not exists. please provide correct file...')
haap.execute_multi_commands(ip, command_file)
#OK python Main.py fw 10.203.1.223 FW15.9.7.7_OR.bin
elif sys.argv[1] == 'fw':
if len(sys.argv) != 4:
print(strFWHelp)
else:
ip = sys.argv[2]
fw_file = sys.argv[3]
if not s.is_IP(ip):
print('Please provide correct engine ip...')
if not s.is_file(fw_file):
print('File not exists. please provide correct file...')
haap.change_firmware(ip, fw_file)
#OK-
elif sys.argv[1] == 'sts':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 3:
print(strSTSHelp)
elif sys.argv[2] == 'all':
haap.show_stauts_all()
else:
if s.is_IP(sys.argv[2]):
haap.show_stauts(sys.argv[2])
else:
print('Please provide correct engine ip...')
#OK
elif sys.argv[1] == 'st':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 3:
print(strSTHelp)
elif sys.argv[2] == 'all':
haap.set_time_all()
else:
if s.is_IP(sys.argv[2]):
haap.set_time(sys.argv[2])
else:
print('Please provide correct engine ip...')
#OK
elif sys.argv[1] == 'stm':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 3:
print(strSTMHelp)
elif sys.argv[2] == 'all':
haap.show_time_all()
else:
if s.is_IP(sys.argv[2]):
haap.show_time(sys.argv[2])
else:
print('Please provide correct engine ip...')
#OK
elif sys.argv[1] == 'pc':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 4:
print(strPCHelp)
# print(strPTCLHelp) 原
elif num_argv > 2:
if sys.argv[2] == 'all':
haap.periodically_check_all()
sw.periodically_check_all()
elif sys.argv[2] == 'haap':
if num_argv == 3:
haap.periodically_check_all()
elif num_argv > 3:
if s.is_IP(sys.argv[3]):
haap.periodically_check(sys.argv[3])
else:
print('Please provide correct engine ip...')
elif sys.argv[2] == 'sw':
if num_argv == 3:
sw.periodically_check_all()
elif num_argv > 3:
if s.is_IP(sys.argv[3]):
sw.periodically_check(sys.argv[3])
else:
print('Please provide correct SAN switch ip...')
else:
print(strPCHelp)
#OK
elif sys.argv[1] == 'mnt':
num_argv = len(sys.argv)
if num_argv == 2 or num_argv > 4:
print(strMNTHelp)
elif sys.argv[2] == 'rt':
m.monitor_rt_1_thread()
elif sys.argv[2] == 'db':
m.monitor_db_4_thread()
else:
print('rt(realtime) or db(datarase)')
elif sys.argv[1] == 'v':
print("VersaTEL G1",Version)
else:
print(strHelp)