def compile_to_hardware(seqs, fileName=None, suffix='', alignMode="right", nbrRepeats=1):
#Add the digitizer trigger to each sequence
#TODO: Make this more sophisticated.
PatternUtils.add_digitizer_trigger(seqs, channelLib['digitizerTrig'])
# normalize sequences
channels = set([])
for seq in seqs:
channels |= find_unique_channels(seq)
seqs = [normalize(seq, channels) for seq in seqs]
#Compile all the pulses/pulseblocks to linklists and waveform libraries
linkLists, wfLib = compile_sequences(seqs)
# align channels
# this horrible line finds the longest miniLL across all channels
longestLL = max([sum([entry.totLength for entry in miniLL]) for LL in linkLists.values() for miniLL in LL])
for chan, LL in linkLists.items():
PatternUtils.align(LL, alignMode, longestLL+SEQUENCE_PADDING)
#Add the slave trigger
#TODO: only add to slave devices
linkLists[channelLib['slaveTrig']], wfLib[channelLib['slaveTrig']] = PatternUtils.slave_trigger(len(seqs))
# map logical to physical channels
awgData = map_logical_to_physical(linkLists, wfLib)
# for each physical channel need to:
# 1) delay
# 2) apply SSB if necessary
# 3) mixer correct
for awgName, awg in awgData.items():
for chanName, chanData in awg.items():
if chanData:
# construct IQkey using existing convention
IQkey = awgName + '-' + chanName[2:]
chanObj = channelLib[IQkey]
#We handle marker and quadrature channels differently
#For now that is all we handle
if isinstance(chanObj, Channels.PhysicalQuadratureChannel):
#Apply mixer corrections and channel delay
PatternUtils.delay(chanData['linkList'], chanObj.delay + chanObj.AWG.delay, chanObj.samplingRate)
#At this point we finally have the timing of all the pulses so we can apply SSB
if hasattr(chanObj, 'SSBFreq') and abs(chanObj.SSBFreq) > 0:
PatternUtils.apply_SSB(chanData['linkList'], chanData['wfLib'], chanObj.SSBFreq, chanObj.samplingRate)
PatternUtils.correctMixer(chanData['wfLib'], chanObj.correctionT)
# add gate pulses on the marker channel
# note that the marker may be on an entirely different AWG
markerAwgName, markerKey = chanObj.gateChan.label.split('-')
markerKey = 'ch' + markerKey
markerAwg = awgData[markerAwgName]
genObj = chanObj.generator
#TODO: check if this actually catches overwriting markers
if markerAwg[markerKey]:
warn('Reuse of marker gating channel: {0}'.format(markerKey))
markerAwg[markerKey] = {'linkList':None, 'wfLib':markerWFLib}
markerAwg[markerKey]['linkList'] = PatternUtils.create_gate_seqs(
chanData['linkList'], genObj.gateBuffer, genObj.gateMinWidth, chanObj.samplingRate)
markerDelay = genObj.gateDelay + chanObj.gateChan.delay + (chanObj.AWG.delay - chanObj.gateChan.AWG.delay)
PatternUtils.delay(markerAwg[markerKey]['linkList'], markerDelay, chanObj.gateChan.samplingRate )
elif isinstance(chanObj, Channels.PhysicalMarkerChannel):
PatternUtils.delay(chanData['linkList'], chanObj.delay+chanObj.AWG.delay, chanObj.samplingRate)
else:
raise NameError('Unable to handle channel type.')
#Remove unused waveforms
compress_wfLib(chanData['linkList'], chanData['wfLib'])
#Loop back through to fill empty channels and write to file
fileList = []
for awgName, awg in awgData.items():
#If all the channels are empty then do not bother writing the file
if not all([chan is None for chan in awg.values()]):
for chan in awg.keys():
if not awg[chan]:
#"Seems hackish but check for marker
if chan[-2] == 'm':
awg[chan] = {'linkList': [[create_padding_LL(SEQUENCE_PADDING//2), create_padding_LL(SEQUENCE_PADDING//2)]],
'wfLib': markerWFLib}
else:
awg[chan] = {'linkList': [[create_padding_LL(SEQUENCE_PADDING//2), create_padding_LL(SEQUENCE_PADDING//2)]],
'wfLib': {TAZKey:np.zeros(1, dtype=np.complex)}}
# convert to hardware formats
# create the target folder if it does not exist
targetFolder = os.path.split(os.path.normpath(os.path.join(config.AWGDir, fileName)))[0]
if not os.path.exists(targetFolder):
os.mkdir(targetFolder)
fullFileName = os.path.normpath(os.path.join(config.AWGDir, fileName + '-' + awgName + suffix + instrumentLib[awgName].seqFileExt))
if isinstance(instrumentLib[awgName], APS):
write_APS_file(awg, fullFileName, nbrRepeats)
elif isinstance(instrumentLib[awgName], Tek5014):
assert nbrRepeats == 1, 'nbrRepeats > 1 not implemented for the Tek'
write_Tek_file(awg, fullFileName, fileName)
else:
raise NameError('Unknown AWG type')
fileList.append(fullFileName)
#Return the filenames we wrote
return fileList
def compile_to_hardware(seqs,
fileName=None,
suffix='',
alignMode="right",
nbrRepeats=1):
#Add the digitizer trigger to each sequence
#TODO: Make this more sophisticated.
PatternUtils.add_digitizer_trigger(seqs, channelLib['digitizerTrig'])
# normalize sequences
channels = set([])
for seq in seqs:
channels |= find_unique_channels(seq)
seqs = [normalize(seq, channels) for seq in seqs]
#Compile all the pulses/pulseblocks to linklists and waveform libraries
linkLists, wfLib = compile_sequences(seqs)
# align channels
# this horrible line finds the longest miniLL across all channels
longestLL = max([
sum([entry.totLength for entry in miniLL])
for LL in linkLists.values() for miniLL in LL
])
for chan, LL in linkLists.items():
PatternUtils.align(LL, alignMode, longestLL + SEQUENCE_PADDING)
#Add the slave trigger
#TODO: only add to slave devices
linkLists[channelLib['slaveTrig']], wfLib[
channelLib['slaveTrig']] = PatternUtils.slave_trigger(len(seqs))
# map logical to physical channels
awgData = map_logical_to_physical(linkLists, wfLib)
# for each physical channel need to:
# 1) delay
# 2) apply SSB if necessary
# 3) mixer correct
for awgName, awg in awgData.items():
for chanName, chanData in awg.items():
if chanData:
# construct IQkey using existing convention
IQkey = awgName + '-' + chanName[2:]
chanObj = channelLib[IQkey]
#We handle marker and quadrature channels differently
#For now that is all we handle
if isinstance(chanObj, Channels.PhysicalQuadratureChannel):
#Apply mixer corrections and channel delay
PatternUtils.delay(chanData['linkList'],
chanObj.delay + chanObj.AWG.delay,
chanObj.samplingRate)
#At this point we finally have the timing of all the pulses so we can apply SSB
if hasattr(chanObj,
'SSBFreq') and abs(chanObj.SSBFreq) > 0:
PatternUtils.apply_SSB(chanData['linkList'],
chanData['wfLib'],
chanObj.SSBFreq,
chanObj.samplingRate)
PatternUtils.correctMixer(chanData['wfLib'],
chanObj.correctionT)
# add gate pulses on the marker channel
# note that the marker may be on an entirely different AWG
markerAwgName, markerKey = chanObj.gateChan.name.split('-')
markerKey = 'ch' + markerKey
markerAwg = awgData[markerAwgName]
genObj = chanObj.generator
#TODO: check if this actually catches overwriting markers
if markerAwg[markerKey]:
warn('Reuse of marker gating channel: {0}'.format(
markerKey))
markerAwg[markerKey] = {
'linkList': None,
'wfLib': markerWFLib
}
markerAwg[markerKey][
'linkList'] = PatternUtils.create_gate_seqs(
chanData['linkList'], genObj.gateBuffer,
genObj.gateMinWidth, chanObj.samplingRate)
markerDelay = genObj.gateDelay + chanObj.gateChan.delay + (
chanObj.AWG.delay - chanObj.gateChan.AWG.delay)
PatternUtils.delay(markerAwg[markerKey]['linkList'],
markerDelay,
chanObj.gateChan.samplingRate)
elif isinstance(chanObj, Channels.PhysicalMarkerChannel):
PatternUtils.delay(chanData['linkList'],
chanObj.delay + chanObj.AWG.delay,
chanObj.samplingRate)
else:
raise NameError('Unable to handle channel type.')
#Loop back through to fill empty channels and write to file
fileList = []
for awgName, awg in awgData.items():
#If all the channels are empty then do not bother writing the file
if not all([chan is None for chan in awg.values()]):
for chan in awg.keys():
if not awg[chan]:
#"Seems hackish but check for marker
if chan[-2] == 'm':
awg[chan] = {
'linkList': [[
create_padding_LL(SEQUENCE_PADDING // 2),
create_padding_LL(SEQUENCE_PADDING // 2)
]],
'wfLib':
markerWFLib
}
else:
awg[chan] = {
'linkList': [[
create_padding_LL(SEQUENCE_PADDING // 2),
create_padding_LL(SEQUENCE_PADDING // 2)
]],
'wfLib': {
TAZKey: np.zeros(1, dtype=np.complex)
}
}
# convert to hardware formats
# create the target folder if it does not exist
targetFolder = os.path.split(config.AWGDir + fileName)[0]
if not os.path.exists(targetFolder):
os.mkdir(targetFolder)
fullFileName = config.AWGDir + fileName + '-' + awgName + suffix + instrumentLib[
awgName].seqFileExt
if isinstance(instrumentLib[awgName], APS):
write_APS_file(awg, fullFileName, nbrRepeats)
elif isinstance(instrumentLib[awgName], Tek5014):
assert nbrRepeats == 1, 'nbrRepeats > 1 not implemented for the Tek'
write_Tek_file(awg, fullFileName, fileName)
else:
raise NameError('Unknown AWG type')
fileList.append(fullFileName)
#Return the filenames we wrote
return fileList
def compile_to_hardware(seqs, fileName, suffix='', alignMode="right"):
'''
Compiles 'seqs' to a hardware description and saves it to 'fileName'. Other inputs:
suffix : string to append to end of fileName (e.g. with fileNames = 'test' and suffix = 'foo' might save to test-APSfoo.h5)
alignMode : 'left' or 'right' (default 'left')
'''
#Add the digitizer trigger to measurements
PatternUtils.add_digitizer_trigger(seqs, channelLib['digitizerTrig'])
# Add gating/blanking pulses
PatternUtils.add_gate_pulses(seqs)
# Add the slave trigger
PatternUtils.add_slave_trigger(seqs, channelLib['slaveTrig'])
# find channel set at top level to account for individual sequence channel variability
channels = set([])
for seq in seqs:
channels |= find_unique_channels(seq)
#Compile all the pulses/pulseblocks to linklists and waveform libraries
linkLists, wfLib = compile_sequences(seqs, channels)
if not validate_linklist_channels(linkLists.keys()):
print "Compile to hardware failed"
return
# apply gating constraints
for chan, LL in linkLists.items():
if isinstance(chan, Channels.LogicalMarkerChannel):
linkLists[chan] = PatternUtils.apply_gating_constraints(chan.physChan, LL)
# map logical to physical channels
awgData = map_logical_to_physical(linkLists, wfLib)
# construct channel delay map
chanDelays = channel_delay_map(awgData)
# for each physical channel need to:
# 1) delay
# 2) apply SSB if necessary
# 3) mixer correct
for awgName, data in awgData.items():
for chanName, chanData in data.items():
if chanData:
# construct IQkey using existing convention
IQkey = awgName + '-' + chanName[2:]
chanObj = channelLib[IQkey]
# apply channel delay
PatternUtils.delay(chanData['linkList'], chanDelays[IQkey], chanObj.samplingRate)
# For quadrature channels, apply SSB and mixer correction
if isinstance(chanObj, Channels.PhysicalQuadratureChannel):
#At this point we finally have the timing of all the pulses so we can apply SSB
if hasattr(chanObj, 'SSBFreq') and abs(chanObj.SSBFreq) > 0:
PatternUtils.apply_SSB(chanData['linkList'], chanData['wfLib'], chanObj.SSBFreq, chanObj.samplingRate)
PatternUtils.correctMixer(chanData['wfLib'], chanObj.correctionT)
#Remove unused waveforms
compress_wfLib(chanData['linkList'], chanData['wfLib'])
#Loop back through to fill empty channels and write to file
fileList = []
for awgName, data in awgData.items():
#If all the channels are empty then do not bother writing the file
if all([chan is None for chan in data.values()]):
continue
# convert to hardware formats
# create the target folder if it does not exist
targetFolder = os.path.split(os.path.normpath(os.path.join(config.AWGDir, fileName)))[0]
if not os.path.exists(targetFolder):
os.mkdir(targetFolder)
fullFileName = os.path.normpath(os.path.join(config.AWGDir, fileName + '-' + awgName + suffix + instrumentLib[awgName].seqFileExt))
write_sequence_file(instrumentLib[awgName], data, fullFileName)
fileList.append(fullFileName)
#Return the filenames we wrote
return fileList
def compile_to_hardware(seqs, fileName, suffix='', alignMode="right"):
'''
Compiles 'seqs' to a hardware description and saves it to 'fileName'. Other inputs:
suffix : string to append to end of fileName (e.g. with fileNames = 'test' and suffix = 'foo' might save to test-APSfoo.h5)
alignMode : 'left' or 'right' (default 'left')
'''
#Add the digitizer trigger to measurements
PatternUtils.add_digitizer_trigger(seqs, channelLib['digitizerTrig'])
# Add gating/blanking pulses
PatternUtils.add_gate_pulses(seqs)
# Add the slave trigger
PatternUtils.add_slave_trigger(seqs, channelLib['slaveTrig'])
# find channel set at top level to account for individual sequence channel variability
channels = set([])
for seq in seqs:
channels |= find_unique_channels(seq)
#Compile all the pulses/pulseblocks to linklists and waveform libraries
linkLists, wfLib = compile_sequences(seqs, channels)
if not validate_linklist_channels(linkLists.keys()):
print "Compile to hardware failed"
return
# apply gating constraints
for chan, LL in linkLists.items():
if isinstance(chan, Channels.LogicalMarkerChannel):
linkLists[chan] = PatternUtils.apply_gating_constraints(
chan.physChan, LL)
# map logical to physical channels
awgData = map_logical_to_physical(linkLists, wfLib)
# construct channel delay map
chanDelays = channel_delay_map(awgData)
# for each physical channel need to:
# 1) delay
# 2) apply SSB if necessary
# 3) mixer correct
for awgName, data in awgData.items():
for chanName, chanData in data.items():
if chanData:
# construct IQkey using existing convention
IQkey = awgName + '-' + chanName[2:]
chanObj = channelLib[IQkey]
# apply channel delay
PatternUtils.delay(chanData['linkList'], chanDelays[IQkey],
chanObj.samplingRate)
# For quadrature channels, apply SSB and mixer correction
if isinstance(chanObj, Channels.PhysicalQuadratureChannel):
#At this point we finally have the timing of all the pulses so we can apply SSB
if hasattr(chanObj,
'SSBFreq') and abs(chanObj.SSBFreq) > 0:
PatternUtils.apply_SSB(chanData['linkList'],
chanData['wfLib'],
chanObj.SSBFreq,
chanObj.samplingRate)
PatternUtils.correctMixer(chanData['wfLib'],
chanObj.correctionT)
#Remove unused waveforms
compress_wfLib(chanData['linkList'], chanData['wfLib'])
#Loop back through to fill empty channels and write to file
fileList = []
for awgName, data in awgData.items():
#If all the channels are empty then do not bother writing the file
if all([chan is None for chan in data.values()]):
continue
# convert to hardware formats
# create the target folder if it does not exist
targetFolder = os.path.split(
os.path.normpath(os.path.join(config.AWGDir, fileName)))[0]
if not os.path.exists(targetFolder):
os.mkdir(targetFolder)
fullFileName = os.path.normpath(
os.path.join(
config.AWGDir, fileName + '-' + awgName + suffix +
instrumentLib[awgName].seqFileExt))
write_sequence_file(instrumentLib[awgName], data, fullFileName)
fileList.append(fullFileName)
#Return the filenames we wrote
return fileList