Ejemplo n.º 1
0
def verifyDoc(msg, publicKey):
    print "msg: ",msg
    print int(publicKey.split(', ')[0]), int(publicKey.split(', ')[1])
    try:
        n = int(publicKey.split(', ')[0])
        e = int(publicKey.split(', ')[1])
        i = 0
        for char in msg:
            if char == '[':
                break
            i += 1
        out = list()
        for c in msg[i+1:-1].split(","):
            if ']' in c:
                c = c[:-1]
            out.append(long(c))
        msg = msg[:i-1]
        rsa = RSA()
        decrypted = rsa.decrypt(out,n,e)
        sha = SHA1()
        hashed = ''
        for part in range((len(msg)//448)+1):
            hashed = hashed + sha.doDigest(sha.addPadding(msg))
        if hashed == decrypted:
            print "MENSAJE AUTENTICO!"
        else:
            print "MENSAJE MODIFICADO!"
    except ValueError:
        print "SE HA INTRODUCIDO UNA LLAVE ERRONEA!"
Ejemplo n.º 2
0
def encrypt(file, save_as, schema, base_path):

    if schema == 'AES':
        pickle_in = open(base_path + 'en-de/aes.p', 'rb')
        passwd = pickle.load(pickle_in)
        pickle_in.close()
        AES.encrypt_AES(file, passwd, save_as)

    elif schema == 'RSA':

        RSA.encrypt_RSA(file, save_as, base_path)

    elif schema == 'DES':
        pickle_in = open(base_path + 'en-de/des.p', 'rb')
        passwd = pickle.load(pickle_in)
        pickle_in.close()
        DES.encrypt_DES(file, passwd, save_as)
    elif schema == 'BF':
        pickle_in = open(base_path + 'en-de/bf.p', 'rb')
        #print(base_path)
        passwd = pickle.load(pickle_in)
        pickle_in.close()
        bf.encrypt_bf(file, passwd, save_as)

    else:
        print('pending')
        sys.exit(2)
def encrypt():
    print("--------------------加密过程开始--------------------")
    print("--------------------MD5加密开始--------------------")
    mess=input("请输入想加密的消息(默认为hello):") or "hello"
    origin=mess
    md5Tmp=md5.md5hash(mess)
    print(f"明文长度为: {origin.__len__()}\n输入的明文的MD5值为: {md5Tmp}")
    print("--------------------MD5加密结束--------------------\n")
    print("--------------------RSA加密开始--------------------")
    p = int(input("输入RSA密码算法的p值(必须为素数,默认值为47):") or "47")
    q = int(input("输入RSA密码算法的q值(必须为素数且不能与上面的值相同,默认值为463):") or "463")
    ListOut = RSA.generate_key_pair(p,q)
    encrypted = RSA.encrypt(ListOut[0],ListOut[1], md5Tmp)
    encrypted_msg=' '.join(map(lambda x: str(x), encrypted))
    print(f"RSA公钥为: ({ListOut[0]},{ListOut[1]})\nRSA私钥的key值为: {ListOut[2]}\nRSA私钥的n值为: {ListOut[1]}\nRSA密文为:\n{encrypted_msg}\n")
    print("--------------------RSA加密结束--------------------\n")
    print("--------------------DES加密开始--------------------")
    combine=origin+encrypted_msg
    noPairKey=input("输入您的DES密钥(默认值为hello123,必须为8个):") or "hello123"
    desObject=DES.des()
    finalOut=desObject.encrypt(noPairKey,combine,padding=True)
    f=open("encrypted.txt","wb")
    f.write(bytes(finalOut,'utf-8'))
    f.close()
    print(f"DES明文为:\n{combine}\nDES密文为:\n{finalOut}\n密文已编码后写入encrypted.txt文件中")
    print("--------------------DES加密结束--------------------")
    print("--------------------加密过程结束--------------------\n")
Ejemplo n.º 4
0
def p46():
    rsa = RSA()
    m = b64decode(
        'VGhhdCdzIHdoeSBJIGZvdW5kIHlvdSBkb24ndCBwbGF5IGFyb3VuZCB3aXRoIHRoZSBG'
        'dW5reSBDb2xkIE1lZGluYQ=='
    )

    m = int(hexlify(m), 16)
    c = rsa.enc(m)
    bounds = [(0, 1), (1, 1)]

    for _ in range(rsa.N.bit_length()):
        nm = bounds[0][0] * bounds[1][1] + bounds[1][0] * bounds[0][1]
        dm = bounds[0][1] * bounds[1][1] * 2
        gcd = gcd_func(nm, dm)
        nm, dm = nm / gcd, dm / gcd

        c = (pow(2, rsa.e, rsa.N) * c) % rsa.N

        if rsa.dec(c) % 2 == 0:
            bounds[1] = (nm, dm)
        else:
            bounds[0] = (nm, dm)

    recovered = bounds[1][0] * rsa.N / bounds[1][1]
    return 'Recovered message "{}"'.format(unhexlify(hex(recovered)[2:-1]))
Ejemplo n.º 5
0
def Encrypted(k, t, CP_1, CP_2, keys: list):
    print('Зашифровываем сеансовый ключ, временную метку и цифровую подпись')
    c_k = RSA.Encription(keys, int(k))
    c_t = RSA.Encription(keys, int(t))
    c_CP_1 = RSA.Encription(keys, int(CP_1))
    c_CP_2 = RSA.Encription(keys, int(CP_2))
    return c_k, c_t, c_CP_1, c_CP_2
Ejemplo n.º 6
0
    def RSA_challenge(self, other):
        usleep(self.transmission_delay) # wait in getting the package
        first_response = other.respond_to_id(self.id)

        success, data = RSA.RSA_Decrypt(self.private_key, first_response)
        usleep(self.processing_delay)


        if success is False:
            print("Something went Wrong in decyrpting response")

        data = data.decode('utf-8')

        temp = data.split(',')
        # other's id, other's nonce, other's timestamp
        other_pkey = self.publickeylist[int(temp[0])]

        nonce = random.randint(0, 1000)
        self.sentNonce = nonce
        data = temp[1] + ", " + str(nonce) + ", " + str(self.id) + ", " + str(time.gmtime())
        data = data.encode('utf-8')

        self.pointB_id = int(temp[0])
        challenger_pkey = self.publickeylist[self.pointB_id]
        usleep(self.transmission_delay)
        package = RSA.RSA_Encrypt(challenger_pkey, data)
        usleep(self.processing_delay)


        nonce, timestamp = other.verify_nonce(package)

        usleep(self.transmission_delay)
        if self.sentNonce == nonce:
            return True
        return False
Ejemplo n.º 7
0
def perf_test():
	bits = [16, 32, 64, 1048, 2048]
	
	message = "Hello World"
	print("Encrypting Message: " + message)
	
	for size in bits:
	
		print("===================================")
		print("Key size: %d" % size)
		gen_start = time.perf_counter()
		keyPair = rsa.KeyPair(size)
		print(time.perf_counter() - gen_start)
		
		print("Encrypting")
		enc_start = time.perf_counter()
		cypher = rsa.encryptMessage(keyPair.publicKey, "Hello World")
		print(time.perf_counter() - enc_start)
		
		print("Decrypting")
		dec_start = time.perf_counter()
		message = rsa.decryptMessage(keyPair.privateKey, cypher)
		print(time.perf_counter() - dec_start)
		print("Decrypted message: " + message)
		print("===================================\n\n")
Ejemplo n.º 8
0
def verify_trx(block_path, idx):
    data = json.load(open(block_path))
    in_trx = data['output'][str(idx)]

    trx = dict()
    trx['digest'] = str(in_trx["digest"])
    trx['idx'] = int(in_trx["idx"])
    trx["authorID"] = str(in_trx['authorID'])
    trx["clientID"] = str(in_trx['clientID'])
    trx["pub_key"] = str(in_trx['pub_key'])

    signature = in_trx['signature']

    pubkey = str(trx['pub_key'])

    public = rsa.importKey(pubkey)
    msg = b64encode(str(trx))

    print "\n\n---"
    print trx['pub_key']
    print "---\n\n"

    print "\n\n---"
    print msg
    print "---\n\n"

    verify = rsa.verify(msg, b64decode(signature), public)
    return verify, in_trx
def encrypt(tesseractPass, msg):
    tesseractPass = str(tesseractPass)
    ent = str(msg)
    print(' Loading your keys\n ')
    serializer.recover_keyfile(tesseractPass)
    serializer.unzip_all()
    serializer.recover_all(tesseractPass)
    r1, r2, r3 = serializer.read_cripto8_rotors()
    public, private = serializer.read_rsa_keys()
    serializer.del_keys()
    print(' Keys Loaded\n')
    c8out = cripto8.encode(ent, r1, r2, r3)
    ardvkOut = ArDVK64.encode(c8out)
    if len(ardvkOut) > 500:
        tmp_paths = serializer.divide_in_blocks(ardvkOut)
        enc_blocks = RSA.encrypt_blocks(tmp_paths, public)
        serializer.save_enc_blocks(enc_blocks)
        print(
            "\n Text encrypted. The output is all CriptoOutputX.data files. You can zip them with you want.\n"
        )
        print(
            " You should hide criptoExtreme_keys.cripto file. This contains all the keys to decrypt CriptoOutput.txt\n"
        )
    else:
        ent = ardvkOut.encode('utf8')
        enc = RSA.encrypt(ent, public)
        serializer.save_output(enc)
        print("\n Text encrypted. The output is in CriptoOutput.data\n")
        print(
            " You should hide criptoExtreme_keys.cripto file. This contains all the keys to decrypt CriptoOutput.data\n"
        )

    return True
Ejemplo n.º 10
0
    def RuntimeTest(self):
        data = self.testData.strip().split('\n')
        for i in range(len(data)):

            start = time()

            des = DES()
            key = '0001001100110100010101110111100110011011101111001101111111110001'
            des.SetKey(key)
            des.EncryptKey()
            des.SetInputText(data[i])
            des.SetCipherText(des.Encrypt())
            desResult = des.Decrypt()

            stop = time()
            self.runtime += ('DES runtime:' + str(stop - start) + "s\n")

            start = time()

            rsa = RSA()
            rsa.KeyGeneration(128)
            rsaResult = rsa.Decryption(
                rsa.Encryption(int(data[i]), rsa.keyPublic, rsa.n),
                rsa.keyPrivate, rsa.n)

            stop = time()
            self.runtime += ('RSA runtime:' + str(stop - start) + "s\n\n")

        return self.runtime
Ejemplo n.º 11
0
def run(mode):

    flag = False
    while True:
        if (flag):
            break
        flag = True
        files = os.listdir(os.getcwd())
        print files
        #get common elements
        files = [i for i in files if i not in Forbidden]
        print files

        for i in range(len(files)):
            if (os.path.isfile(files[i])):
                if (mode):
                    RSA.runEncrypt(files[i], keyFile=keyPath1)
                else:
                    if (files[i].endswith('.crypt')):
                        RSA.runDecrypt(files[i], keyFile=keyPath2)
                    else:
                        pass
            elif (os.path.isdir(files[i])):
                os.chdir(files[i])
                print "dir"
                flag = False
            else:
                pass
Ejemplo n.º 12
0
def ButtonGenerate():
    DisplayText("RSA keys generated!")
    pssw = appState["UI"]["PasswordTextfield"].get()
    hasher = Hash.sha1()
    hasher.update(pssw.encode())
    key = hasher.digest()
    key = key[:16]
    RS.generateKey(key)
def get_S1_PublicKey(e_CA, n_CA):
    with open("public_directory", 'r') as f:
        sender_public_keys = f.read().split()
        e_S1 = RSA.RSA_decryption(sender_public_keys[2], int(e_CA),
                                  int(n_CA)).replace('{', "")
        n_S1 = RSA.RSA_decryption(sender_public_keys[3], int(e_CA),
                                  int(n_CA)).replace('{', "")
        return e_S1, n_S1
Ejemplo n.º 14
0
def plotMillerTime(p):
	multiVar = 10000000000
	mills = int(round(time.time()*multiVar))
	n = (gmpy2.xmpz(RSA.getRandom())**gmpy2.xmpz(p))+(gmpy2.xmpz(RSA.getRandom())**gmpy2.xmpz(p)-1)
	while not miller_rabin.millerRabin(n, 2):
		n = (gmpy2.xmpz(RSA.getRandom())**gmpy2.xmpz(p))+(gmpy2.xmpz(RSA.getRandom())**gmpy2.xmpz(p)-1)
	mills = int(round(time.time()*multiVar)) - mills
	return (mills, bit_length(n), totalDigits(n))
Ejemplo n.º 15
0
def EnDecript(mode, file):
    settings.init()

    #print settings.CONFIGS['RSA_KEY_PRIVATE']
    if (mode):
        RSA.runEncrypt(file, keyFile=settings.CONFIGS['RSA_KEY_PUBLIC'])
    else:
        RSA.runDecrypt(file, keyFile=settings.CONFIGS['RSA_KEY_PRIVATE'])
Ejemplo n.º 16
0
def main():
    plaintext = b"Hello, I'm another Python programmer."
    rsa = RSA(1024)
    ciphertext = rsa.encrypt(plaintext)
    rsa_server = RSAServer(rsa)

    recovered_plaintext = unpadded_message_recovery(ciphertext, rsa_server)
    assert recovered_plaintext == plaintext
Ejemplo n.º 17
0
def main():
    keys = rsa.generate()

    for x in [2, rsa._prime(), rsa._prime() + 1]: # [0] base case, [1] random 512-bit prime, [2] random 512-bit nonprime.
        y = rsa.encrypt(keys[0],x)
        assert(x != y)
        z = rsa.decrypt(keys[1],y)
        assert(z == x) #Asserts that all functions in RSA is working.
Ejemplo n.º 18
0
def fileTranfer(filename, BRSApublickeye, BRSApublickeyn):
    pattern = r"\.[^.\\/:*?\"<>|\r\n]+$"

    #step0:打开文件,读取文件内容作为明文
    #print "#"*100
    #filename=raw_input("输入你的文件名:")
    result = re.findall(pattern, filename)
    if result[0] == ".txt":
        with open("D:\\python\\code\\" + filename, 'r') as f:
            plainText = ''.join(f.readlines())
    elif result[0] == ".jpg":
        with open("D:\\python\\code\\" + filename, 'rb') as f:
            plainText = ''.join(f.readlines())
    else:
        with open("D:\\python\\code\\" + filename, 'rb') as f:
            plainText = ''.join(f.read())
    print "打开文件成功=>",

    #step1:对明文使用MD5算法进行哈希
    #print "#" * 100
    #myMD5=MD5.MD5(plainText)
    #myhash=myMD5.encrypt()
    #print "哈希值是:",myhash
    myMD5 = hashlib.md5()
    myMD5.update(plainText)
    myhash = myMD5.hexdigest()
    print "生成哈希值成功=>",

    #step2:对哈希值使用RSA进行数字签名
    #print "#" * 100
    #print "RSA算法进行数字签名:"
    #p=int(raw_input("输入私钥p:"))
    #q=int(raw_input("输入私钥q:"))
    myRSA = RSA.RSA(myhash, "", p, q, 107, 0)
    myRSAlength, myDigitalSignature = myRSA.SKencrypt()
    print "生成数字签名成功=>",

    #step3:将明文和数字签名的值连接起来,使用AES算法进行对称加密
    #print "#" * 100
    MplusE = plainText + myDigitalSignature
    #print "明文和经过数字签名的哈希值连接:\n长度为:",len(MplusE),MplusE

    #step4:使用AES对称加密算法对明文和哈希值进行加密
    #print "#" * 100
    #AESkey=raw_input("输入AES密钥:")
    AESkey = ''.join(random.sample(string.ascii_letters + string.digits,
                                   16)).lower()
    print "生成随机AESKEY:%s=>" % AESkey,
    BRSA = RSA.RSA(AESkey, "", 0, 0, BRSApublickeye, BRSApublickeyn)
    SecretAESkey = BRSA.PKencrypt()

    myAES = AES.AES(AESkey, MplusE, "")
    myAESlength, mySecretText = myAES.allEncrypt()

    finalSecretText = SecretAESkey + mySecretText
    print "生成最终密文=>"

    return finalSecretText
Ejemplo n.º 19
0
def elgamalEncrypt(messageFilename, publicKeyFilename):
    fo = open(messageFilename, 'r')
    plaintext = fo.read()
    fo.close()
    #print('%s\n\n%s\n%s\n%s\n' %('Text to encrypt:', '***', plaintext, '***'))


    blocks = RSA.textToBlocks(plaintext)
    #print('%s\n\n%s\n' %('Text blocks:', blocks))
    numbers = RSA.blocksToNumbers(blocks)
    print('%s\n\n%s\n' %('Blocks as numbers:', numbers))


    fo = open(publicKeyFilename, 'r')
    content = fo.read()
    fo.close()
    x, y = content.split(',')
    Q_a = [int(x), int(y)]
    #print ( Q_a )

    #choose ephemeral key
    n_b = random.randint(2,p-1)
    #print(n_b)
    c1 = cryptomath.ellipticCurveMultiplication([A,0], p, P, n_b)
    #print (c1)

    #turn message into points on elliptic curve
    encryptedPoints, mapping = encodeAsAPoints(numbers,A,p)

    s_mapping = ''
    for val in mapping:
        s_mapping += str(val)
    #print (s_mapping)

    #print ('test block:', encryptedPoints)
    #print ('test mapping', mapping )

    c2 = []
    nb_Qa = cryptomath.ellipticCurveMultiplication([A,0], p, Q_a, n_b)

    #print (nb_Qa)

    for m in encryptedPoints:
    	#print (m)
    	pt = cryptomath.ellipticCurveAddition([A,0] , p, [m,nb_Qa] )
    	c2.append( pt )

    #print (c2)

    
    encryptedFile = open('elgamal_message_encrypted.txt', 'w')
    encryptedFile.write('%s, %s' % (c1[0],c1[1]))
    encryptedFile.write('\n')
    for pt in c2:
    	encryptedFile.write('%s, %s' % (pt[0],pt[1]))
    	encryptedFile.write('\n')
    encryptedFile.write('%s' % (s_mapping))
    encryptedFile.close()
Ejemplo n.º 20
0
def ButtonPassword():
    DisplayText("RSA keys read finished!")
    pssw = appState["UI"]["PasswordTextfield"].get()
    hasher = Hash.sha1()
    hasher.update(pssw.encode())
    key = hasher.digest()
    key = key[:16]
    appState["UI"]["rsaPublic"] = RS.readKey(0, key)
    appState["UI"]["rsaPrivate"] = RS.readKey(1, key)
Ejemplo n.º 21
0
    def read_next_message(self):
        try:
            b1, b2 = self.read_bytes(2)
        except SocketError as e:  # to be replaced with ConnectionResetError for py3
            if e.errno == errno.ECONNRESET:
                logger.info("Client closed connection.")
                self.keep_alive = 0
                return
            b1, b2 = 0, 0
        except ValueError as e:
            b1, b2 = 0, 0

        fin = b1 & FIN
        opcode = b1 & OPCODE
        masked = b2 & MASKED
        payload_length = b2 & PAYLOAD_LEN

        if opcode == OPCODE_CLOSE_CONN:
            logger.info("Client asked to close connection.")
            self.keep_alive = 0
            return
        if not masked:
            logger.warn("Client must always be masked.")
            self.keep_alive = 0
            return
        if opcode == OPCODE_CONTINUATION:
            logger.warn("Continuation frames are not supported.")
            return
        elif opcode == OPCODE_BINARY:
            logger.warn("Binary frames are not supported.")
            return
        elif opcode == OPCODE_TEXT:
            opcode_handler = self.server._message_received_
        elif opcode == OPCODE_PING:
            opcode_handler = self.server._ping_received_
        elif opcode == OPCODE_PONG:
            opcode_handler = self.server._pong_received_
        else:
            logger.warn("Unknown opcode %#x." % opcode)
            self.keep_alive = 0
            return

        if payload_length == 126:
            payload_length = struct.unpack(">H", self.rfile.read(2))[0]
        elif payload_length == 127:
            payload_length = struct.unpack(">Q", self.rfile.read(8))[0]

        masks = self.read_bytes(4)
        message_bytes = bytearray()
        for message_byte in self.read_bytes(payload_length):
            message_byte ^= masks[len(message_bytes) % 4]
            message_bytes.append(message_byte)

        # messages encryption using RSA.
        message_encrypt = RSA.RSA_encryption(message_bytes.decode('utf8'))
        message_decrypt = RSA.RSA_decryption(message_encrypt)
        opcode_handler(self, message_decrypt)
Ejemplo n.º 22
0
def main():
    plaintext = b"Hello, I'm a Python programmer."

    ciphertexts = []
    for _ in range(3):
        rsa = RSA(1024)
        ciphertexts.append((rsa.encrypt(plaintext), rsa.n))

    assert rsa_broadcast_attack(ciphertexts) == plaintext
def fileTranfer(secretText, RSApublickeye, RSApublickeyn):
    # step1:使用AES算法解密
    # print "#" * 100
    # secretText=raw_input("输入需要解密的密文:")
    SecretAESkey = secretText[0:48]
    BRSA = RSA.RSA("", SecretAESkey, p, q, 107, 0)
    AESkey = BRSA.SKdecrypt()
    print "解密得到AESkey:%s=>"%AESkey,
    # AESkey = raw_input("输入AES密钥")
    myAES = AES.AES(AESkey, "", secretText[48:])
    Mlength, M = myAES.allDecrypt()

    # step2: 去掉填充0,分离明文和数字签名值
    for i in xrange(-1, -17, -1):
        if M[i] != '0':
            break
    M = M[:i + 1]

    myplainText = M[:len(M) - 64]
    myDigitalSignature = M[-64::]
    print "分离明文和数字签名成功=>",

    # step3:利用RSA算法分析出哈希值
    # print "#" * 100
    # RSApublickeye=int(raw_input("输入RSA解密的公钥e:"))
    # RSApublickeyn=int(raw_input("输入RSA解密的公钥n:"))
    myRSA = RSA.RSA("", myDigitalSignature, 0, 0, RSApublickeye, RSApublickeyn)
    myhash = myRSA.PKdecrypt()
    print "RSA解密出hash值=>",

    # step4:对明文使用MD5算法进行哈希
    # print "#" * 100
    # myMD5 = MD5.MD5(myplainText)
    # calhash = myMD5.encrypt()
    myMD5 = hashlib.md5()
    myMD5.update(myplainText)  # .encode(encoding='utf-8'))
    calhash = myMD5.hexdigest()
    print "计算哈希值成功=>",

    # step5:比较哈希是否相同,相同将明文内容写入文件中
    if calhash == myhash:
        print "hash相同,传输内容未被篡改"
        pattern = r"\.[^.\\/:*?\"<>|\r\n]+$"
        filename = raw_input("输入你要保存的文件名:")
        result = re.findall(pattern, filename)
        if result[0] == ".txt":
            with open("/root/code/panice/xbz/" + filename, 'w') as f:
                f.write(myplainText)
        elif result[0] == ".jpg":
            with open("/root/code/panice/xbz/" + filename, 'wb') as f:
                f.write(myplainText)
        with open("/root/code/panice/xbz/temp.txt", 'w') as f:
            f.write(secretText)
        print "将解密出来的明文和密文分别写进%s和temp.txt文件中,请查看!" % filename
    else:
        print "hash不同,文本错误!"
Ejemplo n.º 24
0
def crypto(mode, type, fileLoaded, fileData, window):
    if fileLoaded:
        # check if default key file exist
        if os.path.isfile('./key.txt'):
            answer = sg.popup_yes_no('Key found in file: key.txt. Do you want to use this key?',keep_on_top = True)
        key = None   
        # key loaded not from key.file
        if answer == None or answer == 'No':
            filename = sg.popup_get_file('Please enter a key file name')
            if filename != None:
                if not os.path.isfile(filename):
                    sg.popup_error('File doesn\'t exist!',keep_on_top = True)
                    return
                else:
                    key = RSA.read_key_from_file(filename)
            else:
                return
        # key loaded from key.file
        elif answer == 'Yes':
            key = RSA.read_key_from_file('./key.txt')
        else:
            return False

        if key:   

            file = None
            # encryption mode
            if(mode == 'E'):
                if(type == 'ECB'):
                    fileData.ECB_make_encrypted_file(key)
                if(type == 'CBC'):
                    fileData.CBC_make_encrypted_file(key)
                if(type == 'PCBC'):
                    fileData.PCBC_make_encrypted_file(key)
                if(type == 'EECB2'):
                    fileData.ECB_make_encrypted_file2(key)

             # decryption mode
            if(mode == 'D'):
                if(type == 'ECB'):
                    fileData.ECB_make_decrypted_file(key)
                if(type == 'CBC'):
                    fileData.CBC_make_decrypted_file(key)
                if(type == 'PCBC'):
                    fileData.PCBC_make_decrypted_file(key)
                if(type == 'DECB2'):
                    fileData.ECB_make_decrypted_file2(key)
            return True

        else:
            sg.popup('No keys!')
            return False

    # file not loaded error
    else: 
        sg.popup_error('File is not loaded!')
Ejemplo n.º 25
0
 def OnClientClick(self, event):
     global key,masKey,public_key,private_key
     self.clientname=self.InputText1.GetValue()
     self.socketmode=0
     #self.cButton.SetLabel("Client")
     key=RSA.Build_key(self.clientname)
     masKey=RSA.Build_key(self.clientname)#Masquerader attack test
     public_key = key.split('/')[0]+'/'+key.split('/')[1] # n/e pair
     private_key = key.split('/')[0]+'/'+key.split('/')[2] # n/d pair
     thread.start_new_thread(self.SocketProc_client,())
Ejemplo n.º 26
0
def keyGenerator(name):
    rsa = RSA()
    publicKey,privateKey = rsa.genKeys()
    f = io.open('publicKey/public'+name, 'w')
    f.write(unicode(str(publicKey)[1:-1],'utf-8'))
    f.close()
    f = io.open('privateKey/private'+name, 'w')
    f.write(unicode(str(privateKey)[1:-1],'utf-8'))
    f.close()
    print publicKey,privateKey
Ejemplo n.º 27
0
def Encryption():
    print('请输加密文件路径:', end='')
    file_path = input()
    print('请输入用户公钥文件路径:', end='')
    pubkey_path = input()
    pubkey = RSA.read_pubkey(pubkey_path)
    text = function.read_file(file_path)
    text = RSA.rsaEncrypt(text, pubkey)
    function.save_file(file_path, text)
    print('文件加密成功!')
Ejemplo n.º 28
0
    def Encrypt_GUI():
        global entext, d, N, p, q
        e, d, N, p, q =RSA.get_key()
        Text_public_key.insert(1.0, '('+str(N)+','+str(e)+')')

        '''加密过程'''
        global entext
        entext = RSA.RSA_Encrypt(message.get(), N, e)
        Text_encryption_result.insert(1.0, entext)  # RSA通过公钥(N, e)进行加密
        tk.messagebox.showinfo('Encryption result', 'The Encryption result is as follows:' + str(entext))
Ejemplo n.º 29
0
def Decryption():
    print('请输入姓名:', end='')
    name = input()
    print('请输解密文件路径:', end='')
    file_path = input()
    privkey_path = config.certificate + name + '.pem'
    privkey = RSA.read_privkey(privkey_path)
    text = function.read_file(file_path)
    text = RSA.rsaDecrypt(text, privkey)
    function.save_file(file_path, text)
    print('文件解密成功!')
Ejemplo n.º 30
0
def handle(conn, ht):
    global access_list, NOW_USER, LAST_USER, START_CLOCK
    log('info', ht[0] + ' connect.')
    # RSA init
    ren = RSA()
    ms = conn.recv(1024).decode('utf-8').strip().split('|')

    if not ms or len(ms) == 1:
        conn.send(b'\nLOGIN FAILED.SHUTDOWN HANDLE')
        conn.close()
        log('warning', ht[0] + ' send data struct can\'t handle')
        return False

    ren.init_en(ms[1], ms[0])
    tf = twoFish.TwoFish()
    conn.send(ren.encode(tf.key).encode())
    # RSA-TwoFish PIPE INIT END
    ms = recv(conn, tf).strip().split('$')
    if len(ms) == 1:
        send(conn, tf, 'LOGIN FAILED.SHUTDOWN HANDLE')
        conn.close()
        log('warning', ht[0] + ' send data struct can\'t handle')
        return False
    if ms[0] not in access_list or not access_list[ms[0]].login(ms[1]):
        send(conn, tf, 'LOGIN FAILED.SHUTDOWN HANDLE')
        conn.close()
        log('warning', ht[0] + ' use ' + ms[0] + ' ' + ms[1] + ' login Failed')
        return False
    send(conn, tf, 'LOGIN SUCCESS')
    log('info', ht[0] + ' login success')
    user = access_list[ms[0]]
    NOW_USER = user
    ret = ''
    while True:
        strs = recv(conn, tf).strip()
        if strs == 'BYEBYE':
            send(conn, tf, 'GOODBYE')
            log('info', NOW_USER.name + ' deconnect.')
            conn.close()
            return True
        else:
            command = strs.split()
            if command:
                strip_list(command)
                if len(command) == 1:
                    if command[0] == 'help':
                        ret = helpmsg
                    #if command[0]=='debug':conn.send(' '.join((str(LAST_USER),str(NOW_USER),str(START_CLOCK))).encode('utf-8'))
                elif len(command) >= 2:
                    ret = check_ret(access(command[0], command[1:]))
                else:
                    pass
                send(conn, tf, ret)
                ret = ''
Ejemplo n.º 31
0
def autograph():
    print('请输入姓名:', end='')
    name = input()
    print('请输入用户私钥文件路径:', end='')
    privkey_path = input()
    CApubkey = RSA.creat_key(5120)
    text = function.read_file(privkey_path)
    text = RSA.rsaEncrypt(text, CApubkey)
    function.save_file(config.certificate + name + '.pem', text)
    print('CA私钥文件路径为:', config.CAprivkey_path)
    print('申请认证成功!')
Ejemplo n.º 32
0
def sign(string):
	global PrivateKey
	ciphertext = []
	for temp in string:
		ciphertext.append(RSA.rsa(temp, PrivateKey, None))
	ciphertext_string = TupleToString(tuple(ciphertext))
	return ciphertext_string
Ejemplo n.º 33
0
def unsign(string):
	global PubKey_OtherGuy
	cleartext = ''
	tuple_string = StringToTuple(string)
	for temp in tuple_string:
		cleartext = cleartext + chr(RSA.rsa(temp, None, PubKey_OtherGuy, decrypt=True))
	return str(cleartext)
Ejemplo n.º 34
0
def rsa_given_lambda(semantics_mat, saliences, util_func=log):

    rsa_obj = RSA(semantics_mat)

    rsa_obj.r0()

    # returns a an RSA object given a specific lambda
    def func_over_lambda(lamb):
        rsa_obj.l = lamb

        rsa_obj.s1(util_func)

        return rsa_obj.r2(saliences)

    # return function over RSA objects
    return func_over_lambda
Ejemplo n.º 35
0
def decrypt(string):
	global PrivateKey
	cleartext = ''
	tuple_string = StringToTuple(string)
	for temp in tuple_string:
		cleartext = cleartext + chr(RSA.rsa(temp, None, PrivateKey, decrypt=True))
	return str(cleartext)
Ejemplo n.º 36
0
 def __AttemptLogin__(self):
     # 登录并保持初始cookie
     logininitpage = self.__session.get("http://bmd.sh.10086.cn/login.jsp")
     cookie = logininitpage.cookies
     # 使用登录页面的cookie获取验证码图片
     r = self.__session.get("http://bmd.sh.10086.cn/captcha.jpg", stream=True, cookies=cookie)
     # 获取生产public key用的modulus和exponent
     public_modulus_hex_re = re.compile("RSAUtils\.getKeyPair(.*)")
     public_modulus_hex = public_modulus_hex_re.findall(logininitpage.content)
     keypairs = public_modulus_hex[0].replace("\"", "").replace("(", "").replace(")", "").replace(";", "").split(",")
     encryptionexponent = keypairs[0].strip()
     modulus = keypairs[2].strip()
     with open('verifycode.jpg', 'wb') as f:
         for chunk in r.iter_content(chunk_size=1024):
             if chunk:  # filter out keep-alive new chunks
                 f.write(chunk)
                 f.flush()
         f.close()
     # 获取验证码图片中的字符
     vcode = captcha.deCAPTCHA('verifycode.jpg')
     # 获取登录提交用的密码
     encryptedpw = RSA.encrypt(self.__password, modulus, encryptionexponent)
     payload = {"lg": self.__username,
                "password": encryptedpw,
                "mc": vcode}
     loginpage = self.__session.post("http://bmd.sh.10086.cn/login.wsp", data=payload, cookies=cookie)
     return loginpage
Ejemplo n.º 37
0
 def signByPrikeyAndSha1(self,message):
     m=EVP.MessageDigest("sha1") 
     m.update(message) 
     digest=m.final() 
     key_str=file(self.prikeyDirectory,"rb").read() 
     key=RSA.load_key_string(key_str, util.no_passphrase_callback) 
     return key.sign(digest, "sha1") 
Ejemplo n.º 38
0
    def __init__(self, pubkey_pkt):
        import warnings
        warnings.warn('Deprecated. No maintainer for PGP. If you use this, please inform M2Crypto maintainer.', DeprecationWarning)

        self._pubkey_pkt = pubkey_pkt
        self._pubkey = RSA.new_pub_key((pubkey_pkt._e, pubkey_pkt._n))
        self._userid = {}
        self._signature = {}
Ejemplo n.º 39
0
def encrypt(text):
    ent=[]
    textoPlano = []
    c = []
    tp = text.strip().split()
    palabras = []
    for i in range(len(tp)):
        palabras.append(tp[i])
    for i in range(len(palabras)):
        for j in range(len(palabras[i])):
            textoPlano.append(ord(palabras[i][j]))              
    e,d,n = RSA.generarLlave()
    for i in range(len(textoPlano)):
        m = textoPlano[i]
        c.append(RSA.powerMod (m,e,n))
    for i in range(len(c)):
            print c[i]
    return c
Ejemplo n.º 40
0
def encrypt(string):
	global PubKey_OtherGuy
	if len(PubKey_OtherGuy) == 0: 
		raise ValueError
	ciphertext = []
	for temp in string:
		ciphertext.append(RSA.rsa(temp, PubKey_OtherGuy, None))
	ciphertext_string = TupleToString(tuple(ciphertext))
	return ciphertext_string
Ejemplo n.º 41
0
    def read_data(self, n, d): 
        '''
        Reads in data from client to be sent and displayed to server.
        
        '''
        try:
            my_incoming_message = secure_utils.recv_end(self.my_connection)  # receive incoming data
            my_incoming_message = secure_utils.unpack_cipherblocks_from_transmit(my_incoming_message)  # unpack the combined cipher blocks
            my_incoming_message = RSA.decrypt(my_incoming_message, n, d, len([my_incoming_message]))  # decrypt the cipher

            while my_incoming_message.strip() != self.my_exit_code and len(my_incoming_message) > 0:
                print "\r\033[1;34m<< {0}\033[1;m".format(my_incoming_message.strip())
                my_incoming_message = secure_utils.recv_end(self.my_connection)  # continue receiving more messages
                my_incoming_message = secure_utils.unpack_cipherblocks_from_transmit(my_incoming_message)  # continue unpacking the cipher blocks
                my_incoming_message = RSA.decrypt(my_incoming_message, n, d, len([my_incoming_message]))  # continue decrypting
                # client disconnected
            self.stop_write_loop() 
        except:
            pass
Ejemplo n.º 42
0
def generate2d():
	_x = []
	_y = []
	for x in xrange(1,10):
		mil = int(round(time.time())*1000000)
		n = RSA.generateLargePrime(x)
		mil = int(round(time.time())*10000000000) - mil
		_y.append(int(mil))
		_x.append(bit_length(n))
	print _x
	print _y
def generate_AES_Key_and_exchange(arduino):
    
    AES_Key = generate_PR_key()
    print "Generated Random AES Key = ", AES_Key
    AES_Key_string = ascii_int_list2string(AES_Key)
    AES_Key_encrypted = RSA.rsa_encrypt(AES_Key_string, RSA_Others_Public_Key)
    print "Encrypted AES Key (with RSA) = ", AES_Key_encrypted
    
    for i in range(AES_KEY_LENGTH):
        arduino.write(append_zeros_at_front(AES_Key_encrypted[i], BIGGEST_CIPHERTEXT_LENGTH))
    return AES_Key
Ejemplo n.º 44
0
 def verifyByPubkeyAndSha1(self,sign,message):
     m=EVP.MessageDigest("sha1") 
     m.update(message) 
     digest=m.final() 
     cert_str=file(self.pubkeyDirectory, "rb").read() 
     mb=BIO.MemoryBuffer(cert_str) 
     cert=RSA.load_pub_key_bio(mb)
     try:
         cert.verify(digest, sign, "sha1")
         return True
     except:
         return False
def cycle_arduino_to_pc(arduino):                                           
      
    arduino_encryted_hash = []
    arduino.readline()
    arduino.readline()
    
    for i in range(16):
        arduino_encryted_hash.append(int(arduino.readline()))

    print "arduino_encryted_hash = ", arduino_encryted_hash
    arduino_msg_length = int(arduino.readline())

    arduino_msg = ''
    for i in range(arduino_msg_length):
        arduino_msg += arduino.readline()[0]

    print "msg =" , arduino_msg
    
    msg_hash_by_pc = MD5.new(arduino_msg)
    msg_hash_by_pc_string = msg_hash_by_pc.digest()
    print "msg_hash_by_pc_string = ", msg_hash_by_pc_string

    msg_hash_by_pc_int_list = []

    for i in range(len(msg_hash_by_pc_string)):
        msg_hash_by_pc_int_list.append(ord(msg_hash_by_pc_string[i]))

    print  "msg_hash_by_pc_int_list = ", msg_hash_by_pc_int_list


    plain_hash = RSA.rsa_decrypt(arduino_encryted_hash, RSA_Others_Public_Key);

    hash_int_list = []

    for val in plain_hash:
        hash_int_list.append(ord(val))

    print "hash_int_list = ", hash_int_list

    if hash_int_list == msg_hash_by_pc_int_list :
        print "Hash and Message match!"
    else:
        print "Hash and Message do not match!"
Ejemplo n.º 46
0
 def write_data(self, n, e):
     '''
     Reads in data from prompt and sending out to client 
     ''' 
     try:
         
         while self.my_continue_to_write:
             my_original_message = sys.stdin.readline()  # read input from user
             my_outgoing_message = RSA.encrypt(my_original_message, n, e, len([my_original_message]))  # encrypt the users input
             
             my_outgoing_message = secure_utils.combine_cipherblocks_for_transmit(my_outgoing_message) + ";;"  # add the ";;" delimeter. This indicates the end of a user's input. A fix for not knowing the buffer size. 
             self.my_connection.send(my_outgoing_message)  # send out message to the user.
         
             # check to see if my outgoing message is EXIT to quit the chat
             if (my_original_message.strip() == self.my_exit_code):
                 self.my_connection.shutdown(socket.SHUT_RDWR)
                 self.my_connection.close()
                 self.stop_write_loop()
     except:
         pass
Ejemplo n.º 47
0
def desEncrypt(text):
    archive = open("keys.txt", "r")
    line = archive.readlines()
    public = line[0]
    private = line[1]
    archive.close()
    ent = []
    textoPlano = []
    c = []
    llaveP = public.strip().split()
    e = int(llaveP[0])
    n = int(llaveP[1])
    llave = private.strip().split()
    d = int(llave[0])
    ent = text.strip().split()
    for i in range(len(ent)):
        c.append(int(ent[i]))
    for i in range(len(c)):
        temp = c[i]
        textoPlano.append(RSA.powerMod(temp, d, n))
    return textoPlano
def cycle_pc_to_arduino(pc_msg, arduino):
    send_pc_msg_to_arduino(pc_msg, arduino)

    pc_hash = MD5.new(pc_msg)
    pc_hash_string = pc_hash.digest()

    #send_pc_msg_to_arduino(pc_msg)
    print  "pc_hash_string =", pc_hash_string                       
    pc_hash_int_list = []
    for i in range(len(pc_hash_string)):
        pc_hash_int_list.append(ord(pc_hash_string[i]))             # Packing pc_msg hash as int list for sending to arduino
    
    print "pc_hash_int_list = ", pc_hash_int_list
    length =  len(pc_hash_int_list)

    encrypted_pc_hash = RSA.rsa_encrypt(pc_hash_string, RSA_Own_Private_Key)    # Encrypting the hash by RSA
    print "encrypted_pc_hash = " ,encrypted_pc_hash
    # Send encrypted hash to Arduino
    for i in range(16):                                                         # Sending the Encrypted Hash
        arduino.write(append_zeros_at_front(encrypted_pc_hash[i], MOST_NO_OF_DIGITS))
        recieved_by_arduino =  arduino.readline()
Ejemplo n.º 49
0
import RSA

public_key = (2539771189, 7)
private_key = (2539771189, 725620063)  

mess = 'testing testing 123 123456 hi dave'

ascii_mess = [ord(char) for char in mess]

print(ascii_mess)

encrypted_ascii_mess = [RSA.encrypt(public_key, message) for message in ascii_mess]

print(encrypted_ascii_mess)

decrypted_ascii_mess = [RSA.decrypt(private_key, message) for message in encrypted_ascii_mess]

print(decrypted_ascii_mess)

decrypted_mess = ''

for char in decrypted_ascii_mess:
    decrypted_mess += chr(char)

print(decrypted_mess)
print(mess)




Ejemplo n.º 50
0
def RSAKeyGeneration(security_level):
    keys = RSA.generateKeys(security_level)
    e, N, d, p, q = keys[0], keys[1], keys[2], keys[3], keys[4]

    return e, N, d, p, q
Ejemplo n.º 51
0
def RSAencryption(N, e, message, L):
    
    return RSA.encrypt(N, e, message, L)
Ejemplo n.º 52
0
 def genRsaKeypair(self,rsalen = 1024):
     rsa_key = RSA.gen_key(rsalen, 3, lambda *arg:None) 
     
     rsa_key.save_key(self.prikeyDirectory, None)
     rsa_key.save_pub_key(self.pubkeyDirectory)
Ejemplo n.º 53
0
            # читаем файл
            file = open(sys.argv[2], "r")
            text = file.read()
            file.close()

            # сгенерируем хеш
            hash_text = "".join([str(hex(h)[2:]).replace("L", "") for h in SHA1.sha1(text)])

            # хеш шифруем закрытым ключом
            file = open(sys.argv[4], "r")
            buf = file.readline()
            d = int(buf)
            buf = file.readline()
            n = int(buf)
            file.close()
            crypted_hash = RSA.encryptstr(d, n, hash_text)

            # дешифруем с помощью открытого ключа
            file = open(sys.argv[3], "r")
            buf = file.readline()
            e = int(buf)
            decrypted_hash = "".join([chr(i) for i in RSA.decryptlist(e, n, crypted_hash)])
            file.close()

            # сраниваем подписи
            if hash_text == decrypted_hash:
                print("Succesfull validate!")
            else:
                print("Digital signatures do not match!")

        if sys.argv[1] == "genkey_rsa":
Ejemplo n.º 54
0
     print("[e] Calculate multiplicative inverse")
     print("[f] Calculate entropy") 
     print("[g] Perform a shift")
     print("[h] Decrypt RSA with primes")
     print("[i] Decrypt RSA without primes")
     print("[x] Exit\n>>> ")
     answer = raw_input()
 
     if answer == 'a':
         Modular_Exponent()
     elif answer == 'b':
         n = int(raw_input("What number do you want to factor: "))
         print(Crypto.factorize(n))
     elif answer == 'c':
         totient()
     elif answer == 'd':
         x = int(raw_input("Enter your first number: "))
         y = int(raw_input("Enter your second number: "))
         print("The gcd is: " + str(Crypto.egcd(x,y)[0]))
     elif answer == 'e':
         x = int(raw_input("Enter your number: "))
         y = int(raw_input("Enter your mod: "))
         print("The inverse is: " + str(Crypto.modinv(x,y)))
     elif answer == 'f':
         Crypto.entropy()
     elif answer == 'g':
         Crypto.shift()
     elif answer == 'h':
         RSA.decryptRSA()
     elif answer == 'i':
         RSA.decryptRSAPrimes()
Ejemplo n.º 55
0
def RSAdecryption(N, d, p, q, cipher_text, L):
   
    return RSA.decrypt(N, d, p, q, cipher_text, L)
Ejemplo n.º 56
0
def test_integermod_reciprocal_func(modulo, residue, reciprocal):
    assert RSA.modular_reciprocal(residue, modulo) == reciprocal
Ejemplo n.º 57
0
 def __init__(self, pubkey_pkt):
     self._pubkey_pkt = pubkey_pkt
     self._pubkey = RSA.new_pub_key((pubkey_pkt._e, pubkey_pkt._n))
     self._userid = {}
     self._signature = {}
Ejemplo n.º 58
0
def RSAVerifySignature(N, e, message, signature):

    return RSA.verifySignature(N, e, message, signature)
Ejemplo n.º 59
0
def doSquareAttack(n):
	r = RSA.generate_r(n)
	bits_to_solve = 32
	secretKey = '1'
	
	for i in range(1, bits_to_solve):
		sample_list = getSampleMessages(5000)
		
		M1 = [] # M1 is our additional reduction with 1
		M2 = []	    # M2 is our no reduction set with 1

		M3 = [] #M3 is our additional reduction set with 0
		M4 = []	    #M4 is our no reduction set with 0

		for sample in sample_list:
			
			if(RSA.CheckReduction(secretKey[0] + '1', sample, n, r)):
				M1.append(sample)
			else:
				M2.append(sample)
		
			if(RSA.CheckReduction(secretKey[0] + '0', sample, n, r)):
				M3.append(sample)
			else:
				M4.append(sample)
		

		M1_times = []
		M2_times = []
		M3_times = []
		M4_times = []
		for y in M1:
			M1_times.append(connection_handler.getDecryptTime(y))
		
			
		for x in M2:
			M2_times.append(connection_handler.getDecryptTime(x))

		
		for i in M3:
			M3_times.append(connection_handler.getDecryptTime(i))

		
		for j in M4:
			M4_times.append(connection_handler.getDecryptTime(j))

		
		average_M1 = sum(M1_times) / len(M1_times)

		
		average_M2 = sum(M2_times) / len(M2_times)

	
		average_M3 = sum(M3_times) / len(M3_times)

		
		average_M4 = sum(M4_times) / len(M4_times)

		
		if( abs(average_M1 - average_M2) > abs(average_M3 - average_M4)):
			print secretKey + '1'
		else:
			print secretKey + '0'
		
		
		print abs(average_M1 - average_M2)
	        print abs(average_M3 - average_M4)

		print  (abs(average_M1 - average_M2) -  abs(average_M3 - average_M4))
Ejemplo n.º 60
0
def RSAGenerateSignature(N, d, message):

    return RSA.generateSignature(N, d, message)