def addNewProject(ID, BuildMode):
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True, Dir=Dir)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
PMapFile = open(ProjectMapPath, "r+b")
else:
print "Warning: Creating the Project Map file!!"
PMapFile = open(ProjectMapPath, "w+b")
try:
if (isExistingProject(PMapFile, ID)):
print >> sys.stdout, 'Warning: Project with ID \'', ID, \
'\' already exists.'
print >> sys.stdout, "Reference output has been regenerated."
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, int(BuildMode)))
print "The project map is updated: ", ProjectMapPath
finally:
PMapFile.close()
def addNewProject(ID, BuildMode) :
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True, Dir=Dir)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
PMapFile = open(ProjectMapPath, "r+b")
else:
print "Warning: Creating the Project Map file!!"
PMapFile = open(ProjectMapPath, "w+b")
try:
if (isExistingProject(PMapFile, ID)) :
print >> sys.stdout, 'Warning: Project with ID \'', ID, \
'\' already exists.'
print >> sys.stdout, "Reference output has been regenerated."
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow( (ID, int(BuildMode)) );
print "The project map is updated: ", ProjectMapPath
finally:
PMapFile.close()
def addNewProject(ID, BuildMode):
"""
Add a new project for testing: build it and add to the Project Map file.
:param ID: is a short string used to identify a project.
"""
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
FileMode = "r+b"
else:
print "Warning: Creating the Project Map file!!"
FileMode = "w+b"
with open(ProjectMapPath, FileMode) as PMapFile:
if (isExistingProject(PMapFile, ID)):
print >> sys.stdout, 'Warning: Project with ID \'', ID, \
'\' already exists.'
print >> sys.stdout, "Reference output has been regenerated."
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, int(BuildMode)))
print "The project map is updated: ", ProjectMapPath
def addNewProject(ID, BuildMode):
"""
Add a new project for testing: build it and add to the Project Map file.
:param ID: is a short string used to identify a project.
"""
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
FileMode = "r+b"
else:
print "Warning: Creating the Project Map file!!"
FileMode = "w+b"
with open(ProjectMapPath, FileMode) as PMapFile:
if (isExistingProject(PMapFile, ID)):
print >> sys.stdout, 'Warning: Project with ID \'', ID, \
'\' already exists.'
print >> sys.stdout, "Reference output has been regenerated."
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, int(BuildMode)))
print "The project map is updated: ", ProjectMapPath
def updateReferenceResults(ProjName, ProjBuildMode):
ProjDir = SATestBuild.getProjectDir(ProjName)
RefResultsPath = os.path.join(ProjDir,
SATestBuild.getSBOutputDirName(IsReferenceBuild=True))
CreatedResultsPath = os.path.join(ProjDir,
SATestBuild.getSBOutputDirName(IsReferenceBuild=False))
if not os.path.exists(CreatedResultsPath):
print >> sys.stderr, "New results not found, was SATestBuild.py "\
"previously run?"
sys.exit(-1)
# Remove reference results.
runCmd('git rm -r "%s"' % (RefResultsPath,))
# Replace reference results with a freshly computed once.
runCmd('cp -r "%s" "%s"' % (CreatedResultsPath, RefResultsPath,))
# Run cleanup script.
with open(SATestBuild.getBuildLogPath(RefResultsPath), "wb+") as PBuildLogFile:
SATestBuild.runCleanupScript(ProjDir, PBuildLogFile)
SATestBuild.normalizeReferenceResults(ProjDir, RefResultsPath, ProjBuildMode)
# Clean up the generated difference results.
SATestBuild.cleanupReferenceResults(RefResultsPath)
# Remove the created .diffs file before adding.
runCmd('rm -f "%s/*/%s"' % (RefResultsPath, SATestBuild.DiffsSummaryFileName))
runCmd('git add "%s"' % (RefResultsPath,))
def addNewProject(ID):
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, True, Dir)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
PMapFile = open(ProjectMapPath, "r+b")
else:
print "Warning: Creating the Project Map file!!"
PMapFile = open(ProjectMapPath, "w+b")
try:
PMapReader = csv.reader(PMapFile)
for I in PMapReader:
IID = I[0]
if ID == IID:
print >> sys.stderr, 'Warning: Project with ID \'', ID, \
'\' already exists.'
sys.exit(-1)
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, Dir))
finally:
PMapFile.close()
print "The project map is updated: ", ProjectMapPath
def addNewProject(ID):
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, True, Dir)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
PMapFile = open(ProjectMapPath, "r+b")
else:
print "Warning: Creating the Project Map file!!"
PMapFile = open(ProjectMapPath, "w+b")
try:
PMapReader = csv.reader(PMapFile)
for I in PMapReader:
IID = I[0]
if ID == IID:
print >> sys.stderr, "Warning: Project with ID '", ID, "' already exists."
sys.exit(-1)
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, Dir))
finally:
PMapFile.close()
print "The project map is updated: ", ProjectMapPath
def updateReferenceResults(ProjName, ProjBuildMode):
ProjDir = SATestBuild.getProjectDir(ProjName)
RefResultsPath = os.path.join(
ProjDir, SATestBuild.getSBOutputDirName(IsReferenceBuild=True))
CreatedResultsPath = os.path.join(
ProjDir, SATestBuild.getSBOutputDirName(IsReferenceBuild=False))
if not os.path.exists(CreatedResultsPath):
print("New results not found, was SATestBuild.py "
"previously run?",
file=sys.stderr)
sys.exit(1)
BuildLogPath = SATestBuild.getBuildLogPath(RefResultsPath)
Dirname = os.path.dirname(os.path.abspath(BuildLogPath))
runCmd("mkdir -p '%s'" % Dirname)
with open(BuildLogPath, "w+") as PBuildLogFile:
# Remove reference results: in git, and then again for a good measure
# with rm, as git might not remove things fully if there are empty
# directories involved.
runCmd('git rm -r -q "%s"' % (RefResultsPath, ), stdout=PBuildLogFile)
runCmd('rm -rf "%s"' % (RefResultsPath, ), stdout=PBuildLogFile)
# Replace reference results with a freshly computed once.
runCmd('cp -r "%s" "%s"' % (
CreatedResultsPath,
RefResultsPath,
),
stdout=PBuildLogFile)
# Run cleanup script.
SATestBuild.runCleanupScript(ProjDir, PBuildLogFile)
SATestBuild.normalizeReferenceResults(ProjDir, RefResultsPath,
ProjBuildMode)
# Clean up the generated difference results.
SATestBuild.cleanupReferenceResults(RefResultsPath)
runCmd('git add "%s"' % (RefResultsPath, ), stdout=PBuildLogFile)
def updateReferenceResults(ProjName, ProjBuildMode):
ProjDir = SATestBuild.getProjectDir(ProjName)
RefResultsPath = os.path.join(
ProjDir, SATestBuild.getSBOutputDirName(IsReferenceBuild=True))
CreatedResultsPath = os.path.join(
ProjDir, SATestBuild.getSBOutputDirName(IsReferenceBuild=False))
if not os.path.exists(CreatedResultsPath):
print >> sys.stderr, "New results not found, was SATestBuild.py "\
"previously run?"
sys.exit(-1)
# Remove reference results: in git, and then again for a good measure
# with rm, as git might not remove things fully if there are empty
# directories involved.
runCmd('git rm -r -q "%s"' % (RefResultsPath, ))
runCmd('rm -rf "%s"' % (RefResultsPath, ))
# Replace reference results with a freshly computed once.
runCmd('cp -r "%s" "%s"' % (
CreatedResultsPath,
RefResultsPath,
))
# Run cleanup script.
BuildLogPath = SATestBuild.getBuildLogPath(RefResultsPath)
with open(BuildLogPath, "wb+") as PBuildLogFile:
SATestBuild.runCleanupScript(ProjDir, PBuildLogFile)
SATestBuild.normalizeReferenceResults(ProjDir, RefResultsPath,
ProjBuildMode)
# Clean up the generated difference results.
SATestBuild.cleanupReferenceResults(RefResultsPath)
# Remove the created .diffs file before adding.
removeDiffsSummaryFiles(RefResultsPath)
runCmd('git add "%s"' % (RefResultsPath, ))
def updateReferenceResults(ProjName, ProjBuildMode):
ProjDir = SATestBuild.getProjectDir(ProjName)
RefResultsPath = os.path.join(
ProjDir,
SATestBuild.getSBOutputDirName(IsReferenceBuild=True))
CreatedResultsPath = os.path.join(
ProjDir,
SATestBuild.getSBOutputDirName(IsReferenceBuild=False))
if not os.path.exists(CreatedResultsPath):
print >> sys.stderr, "New results not found, was SATestBuild.py "\
"previously run?"
sys.exit(-1)
# Remove reference results: in git, and then again for a good measure
# with rm, as git might not remove things fully if there are empty
# directories involved.
runCmd('git rm -r -q "%s"' % (RefResultsPath,))
runCmd('rm -rf "%s"' % (RefResultsPath,))
# Replace reference results with a freshly computed once.
runCmd('cp -r "%s" "%s"' % (CreatedResultsPath, RefResultsPath,))
# Run cleanup script.
BuildLogPath = SATestBuild.getBuildLogPath(RefResultsPath)
with open(BuildLogPath, "wb+") as PBuildLogFile:
SATestBuild.runCleanupScript(ProjDir, PBuildLogFile)
SATestBuild.normalizeReferenceResults(
ProjDir, RefResultsPath, ProjBuildMode)
# Clean up the generated difference results.
SATestBuild.cleanupReferenceResults(RefResultsPath)
# Remove the created .diffs file before adding.
removeDiffsSummaryFiles(RefResultsPath)
runCmd('git add "%s"' % (RefResultsPath,))
def addNewProject(ID, BuildMode):
"""
Add a new project for testing: build it and add to the Project Map file.
:param ID: is a short string used to identify a project.
"""
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print("Error: Project directory is missing: %s" % Dir)
sys.exit(-1)
# Build the project.
# TODO: Repair this call. We give it a wrong amount wrong arguments and it
# is not trivial to construct argparse arguments in here.
# Requires refactoring of the 'testProject' function.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
FileMode = "r+"
else:
print("Warning: Creating the Project Map file!!")
FileMode = "w+"
with open(ProjectMapPath, FileMode) as PMapFile:
if (isExistingProject(PMapFile, ID)):
print('Warning: Project with ID \'', ID,
'\' already exists.', file=sys.stdout)
print("Reference output has been regenerated.", file=sys.stdout)
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, int(BuildMode)))
print("The project map is updated: ", ProjectMapPath)