def set_tft_mode(self, v_flip = False, h_flip = False, c_flip = False, orientation = LANDSCAPE):
self.v_flip = v_flip # flip vertical
self.h_flip = h_flip # flip horizontal
self.c_flip = c_flip # flip blue/red
self.orientation = orientation # LANDSCAPE/PORTRAIT
TFT_io.tft_cmd_data_AS(0x36,
bytearray([(self.orientation << 5) |(self.c_flip << 3) | (self.h_flip & 1) << 1 | (self.v_flip) & 1]), 1)
def setScrollArea(self, tfa, vsa, bfa):
TFT_io.tft_cmd_data_AS(0x33, bytearray( #set scrolling range
[(tfa >> 8) & 0xff, tfa & 0xff,
(vsa >> 8) & 0xff, vsa & 0xff,
(bfa >> 8) & 0xff, bfa & 0xff]), 6)
self.scroll_tfa = tfa
self.scroll_vsa = vsa
self.scroll_bfa = bfa
self.setScrollStart(self.scroll_tfa)
x, y = self.getTextPos()
self.setTextPos(x, y) # realign pointers
def setScrollArea(self, tfa, vsa, bfa):
TFT_io.tft_cmd_data_AS(
0x33,
bytearray( #set scrolling range
[(tfa >> 8) & 0xff, tfa & 0xff, (vsa >> 8) & 0xff, vsa & 0xff,
(bfa >> 8) & 0xff, bfa & 0xff]),
6)
self.scroll_tfa = tfa
self.scroll_vsa = vsa
self.scroll_bfa = bfa
self.setScrollStart(self.scroll_tfa)
x, y = self.getTextPos()
self.setTextPos(x, y) # realign pointers
def set_tft_mode(self,
v_flip=False,
h_flip=False,
c_flip=False,
orientation=LANDSCAPE):
self.v_flip = v_flip # flip vertical
self.h_flip = h_flip # flip horizontal
self.c_flip = c_flip # flip blue/red
self.orientation = orientation # LANDSCAPE/PORTRAIT
TFT_io.tft_cmd_data_AS(
0x36,
bytearray([(self.orientation << 5) | (self.c_flip << 3) |
(self.h_flip & 1) << 1 | (self.v_flip) & 1]), 1)
def tft_init(self, controller = "SSD1963", lcd_type = "LB04301", orientation = LANDSCAPE,
v_flip = False, h_flip = False, power_control = True):
#
# For convenience, define X1..X1 and Y9..Y12 as output port using thy python functions.
# X1..X8 will be redefind on the fly as Input by accessing the MODER control registers
# when needed. Y9 is treate seperately, since it is used for Reset, which is done at python level
# since it need long delays anyhow, 5 and 15 ms vs. 10 µs.
#
# Set TFT general defaults
self.controller = controller
self.lcd_type = lcd_type
self.orientation = orientation
self.v_flip = v_flip # flip vertical
self.h_flip = h_flip # flip horizontal
self.c_flip = 0 # flip blue/red
self.rc_flip = 0 # flip row/column
self.setColor((255, 255, 255)) # set FG color to white as can be.
self.setBGColor((0, 0, 0)) # set BG to black
self.bg_buf = bytearray()
#
self.pin_led = None # deferred init Flag
self.power_control = power_control
if self.power_control:
# special treat for Power Pin
self.pin_power = pyb.Pin("Y4", pyb.Pin.OUT_PP)
self.power(True) ## switch Power on
#
pyb.delay(10)
# this may have to be moved to the controller specific section
if orientation == PORTRAIT:
self.setXY = TFT_io.setXY_P
self.drawPixel = TFT_io.drawPixel_P
else:
self.setXY = TFT_io.setXY_L
self.drawPixel = TFT_io.drawPixel_L
self.swapbytes = TFT_io.swapbytes
self.swapcolors = TFT_io.swapcolors
# ----------
for pin_name in ["X1", "X2", "X3", "X4", "X5", "X6", "X7", "X8",
"Y10", "Y11", "Y12"]:
pin = pyb.Pin(pin_name, pyb.Pin.OUT_PP) # set as output
pin.value(1) ## set high as default
# special treat for Reset
self.pin_reset = pyb.Pin("Y9", pyb.Pin.OUT_PP)
# Reset the device
self.pin_reset.value(1) ## do a hard reset
pyb.delay(10)
self.pin_reset.value(0) ## Low
pyb.delay(20)
self.pin_reset.value(1) ## set high again
pyb.delay(20)
#
# Now initialiize the LCD
# This is for the SSD1963 controller and two specific LCDs. More may follow.
# Data taken from the SSD1963 data sheet, SSD1963 Application Note and the LCD Data sheets
#
if controller == "SSD1963": # 1st approach for 480 x 272
TFT_io.tft_cmd_data(0xe2, bytearray(b'\x1d\x02\x54'), 3) # PLL multiplier, set PLL clock to 100M
# N=0x2D for 6.5MHz, 0x1D for 10MHz crystal
# PLLClock = Crystal * (Mult + 1) / (Div + 1)
# The intermediate value Crystal * (Mult + 1) must be between 250MHz and 750 MHz
TFT_io.tft_cmd_data(0xe0, bytearray(b'\x01'), 1) # PLL Enable
pyb.delay(10)
TFT_io.tft_cmd_data(0xe0, bytearray(b'\x03'), 1)
pyb.delay(10)
TFT_io.tft_cmd(0x01) # software reset
pyb.delay(10)
#
# Settings for the LCD
#
# The LCDC_FPR depends on PLL clock and the reccomended LCD Dot clock DCLK
#
# LCDC_FPR = (DCLK * 1048576 / PLLClock) - 1
#
# The other settings are less obvious, since the definitions of the SSD1963 data sheet and the
# LCD data sheets differ. So what' common, even if the names may differ:
# HDP Horizontal Panel width (also called HDISP, Thd). The value store in the register is HDP - 1
# VDP Vertical Panel Width (also called VDISP, Tvd). The value stored in the register is VDP - 1
# HT Total Horizontal Period, also called HP, th... The exact value does not matter
# VT Total Vertical Period, alco called VT, tv, .. The exact value does not matter
# HPW Width of the Horizontal sync pulse, also called HS, thpw.
# VPW Width of the Vertical sync pulse, also called VS, tvpw
# Front Porch (HFP and VFP) Time between the end of display data and the sync pulse
# Back Porch (HBP and VBP Time between the start of the sync pulse and the start of display data.
# HT = FP + HDP + BP and VT = VFP + VDP + VBP (sometimes plus sync pulse width)
# Unfortunately, the controller does not use these front/back porch times, instead it uses an starting time
# in the front porch area and defines (see also figures in chapter 13.3 of the SSD1963 data sheet)
# HPS Time from that horiz. starting point to the start of the horzontal display area
# LPS Time from that horiz. starting point to the horizontal sync pulse
# VPS Time from the vert. starting point to the first line
# FPS Time from the vert. starting point to the vertical sync pulse
#
# So the following relations must be held:
#
# HT > HDP + HPS
# HPS >= HPW + LPS
# HPS = Back Porch - LPS, or HPS = Horizontal back Porch
# VT > VDP + VPS
# VPS >= VPW + FPS
# VPS = Back Porch - FPS, or VPS = Vertical back Porch
#
# LPS or FPS may have a value of zero, since the length of the front porch is detemined by the
# other figures
#
# The best is to start with the recomendations of the lCD data sheet for Back porch, grab a
# sync pulse with and the determine the other, such that they meet the relations. Typically, these
# values allow for some ambuigity.
#
if lcd_type == "LB04301": # Size 480x272, 4.3", 24 Bit, 4.3"
#
# Value Min Typical Max
# DotClock 5 MHZ 9 MHz 12 MHz
# HT (Hor. Total 490 531 612
# HDP (Hor. Disp) 480
# HBP (back porch) 8 43
# HFP (Fr. porch) 2 8
# HPW (Hor. sync) 1
# VT (Vert. Total) 275 288 335
# VDP (Vert. Disp) 272
# VBP (back porch) 2 12
# VFP (fr. porch) 1 4
# VPW (vert. sync) 1 10
#
# This table in combination with the relation above leads to the settings:
# HPS = 43, HPW = 8, LPS = 0, HT = 531
# VPS = 14, VPW = 10, FPS = 0, VT = 288
#
self.disp_x_size = 479
self.disp_y_size = 271
TFT_io.tft_cmd_data_AS(0xe6, bytearray(b'\x01\x70\xa3'), 3) # PLL setting for PCLK
# (9MHz * 1048576 / 100MHz) - 1 = 94371 = 0x170a3
TFT_io.tft_cmd_data_AS(0xb0, bytearray( # # LCD SPECIFICATION
[0x20, # 24 Color bits, HSync/VSync low, No Dithering
0x00, # TFT mode
self.disp_x_size >> 8, self.disp_x_size & 0xff, # physical Width of TFT
self.disp_y_size >> 8, self.disp_y_size & 0xff, # physical Height of TFT
0x00]), 7) # Last byte only required for a serial TFT
TFT_io.tft_cmd_data_AS(0xb4, bytearray(b'\x02\x13\x00\x2b\x08\x00\x00\x00'), 8)
# HSYNC, Set HT 531 HPS 43 HPW=Sync pulse 8 LPS 0
TFT_io.tft_cmd_data_AS(0xb6, bytearray(b'\x01\x20\x00\x0e\x0a\x00\x00'), 7)
# VSYNC, Set VT 288 VPS 14 VPW 10 FPS 0
TFT_io.tft_cmd_data_AS(0x36, bytearray([(orientation & 1) << 5 | (h_flip & 1) << 1 | (v_flip) & 1]), 1)
# rotation/ flip, etc., t.b.d.
elif lcd_type == "AT070TN92": # Size 800x480, 7", 18 Bit, lower color bits ignored
#
# Value Min Typical Max
# DotClock 26.4 MHz 33.3 MHz 46.8 MHz
# HT (Hor. Total 862 1056 1200
# HDP (Hor. Disp) 800
# HBP (back porch) 46 46 46
# HFP (Fr. porch) 16 210 254
# HPW (Hor. sync) 1 40
# VT (Vert. Total) 510 525 650
# VDP (Vert. Disp) 480
# VBP (back porch) 23 23 23
# VFP (fr. porch) 7 22 147
# VPW (vert. sync) 1 20
#
# This table in combination with the relation above leads to the settings:
# HPS = 46, HPW = 8, LPS = 0, HT = 1056
# VPS = 23, VPW = 10, VPS = 0, VT = 525
#
self.disp_x_size = 799
self.disp_y_size = 479
TFT_io.tft_cmd_data_AS(0xe6, bytearray(b'\x05\x53\xf6'), 3) # PLL setting for PCLK
# (33.3MHz * 1048576 / 100MHz) - 1 = 349174 = 0x553f6
TFT_io.tft_cmd_data_AS(0xb0, bytearray( # # LCD SPECIFICATION
[0x00, # 18 Color bits, HSync/VSync low, No Dithering/FRC
0x00, # TFT mode
self.disp_x_size >> 8, self.disp_x_size & 0xff, # physical Width of TFT
self.disp_y_size >> 8, self.disp_y_size & 0xff, # physical Height of TFT
0x00]), 7) # Last byte only required for a serial TFT
TFT_io.tft_cmd_data_AS(0xb4, bytearray(b'\x04\x1f\x00\x2e\x08\x00\x00\x00'), 8)
# HSYNC, Set HT 1056 HPS 46 HPW 8 LPS 0
TFT_io.tft_cmd_data_AS(0xb6, bytearray(b'\x02\x0c\x00\x17\x08\x00\x00'), 7)
# VSYNC, Set VT 525 VPS 23 VPW 08 FPS 0
TFT_io.tft_cmd_data_AS(0x36, bytearray([(orientation & 1) << 5 | (h_flip & 1) << 1 | (v_flip) & 1]), 1)
# rotation/ flip, etc., t.b.d.
else:
print("Wrong Parameter lcd_type: ", lcd_type)
return
TFT_io.tft_cmd_data_AS(0xBA, bytearray(b'\x0f'), 1) # GPIO[3:0] out 1
TFT_io.tft_cmd_data_AS(0xB8, bytearray(b'\x07\x01'), 1) # GPIO3=input, GPIO[2:0]=output
TFT_io.tft_cmd_data_AS(0xf0, bytearray(b'\x00'), 1) # Pixel data Interface 8 Bit
TFT_io.tft_cmd(0x29) # Display on
TFT_io.tft_cmd_data_AS(0xbe, bytearray(b'\x06\xf0\x01\xf0\x00\x00'), 6)
# Set PWM for B/L
TFT_io.tft_cmd_data_AS(0xd0, bytearray(b'\x0d'), 1) # Set DBC: enable, agressive
else:
print("Wrong Parameter controller: ", controller)
return
#
# Set character printing defaults
#
self.text_font = None
self.setTextStyle(self.color, self.BGcolor, 0, None, 0)
#
# Init done. clear Screen and switch BG LED on
#
self.text_x = self.text_y = self.text_yabs = 0
self.clrSCR() # clear the display
def setScrollStart(self, lline):
self.scroll_start = lline # store the logical first line
TFT_io.tft_cmd_data_AS(0x37, bytearray([(lline >> 8) & 0xff, lline & 0xff]), 2)
def setScrollStart(self, lline):
self.scroll_start = lline # store the logical first line
TFT_io.tft_cmd_data_AS(0x37,
bytearray([(lline >> 8) & 0xff, lline & 0xff]),
2)
def tft_init(self,
controller="SSD1963",
lcd_type="LB04301",
orientation=LANDSCAPE,
v_flip=False,
h_flip=False,
power_control=True):
#
# For convenience, define X1..X1 and Y9..Y12 as output port using thy python functions.
# X1..X8 will be redefind on the fly as Input by accessing the MODER control registers
# when needed. Y9 is treate seperately, since it is used for Reset, which is done at python level
# since it need long delays anyhow, 5 and 15 ms vs. 10 µs.
#
# Set TFT general defaults
self.controller = controller
self.lcd_type = lcd_type
self.orientation = orientation
self.v_flip = v_flip # flip vertical
self.h_flip = h_flip # flip horizontal
self.c_flip = 0 # flip blue/red
self.rc_flip = 0 # flip row/column
self.setColor((255, 255, 255)) # set FG color to white as can be.
self.setBGColor((0, 0, 0)) # set BG to black
#
self.pin_led = None # deferred init Flag
self.power_control = power_control
if self.power_control:
# special treat for Power Pin
self.pin_power = pyb.Pin("Y4", pyb.Pin.OUT_PP)
self.power(True) ## switch Power on
#
pyb.delay(10)
# this may have to be moved to the controller specific section
if orientation == PORTRAIT:
self.setXY = TFT_io.setXY_P
self.drawPixel = TFT_io.drawPixel_P
else:
self.setXY = TFT_io.setXY_L
self.drawPixel = TFT_io.drawPixel_L
self.swapbytes = TFT_io.swapbytes
self.swapcolors = TFT_io.swapcolors
# ----------
for pin_name in [
"X1", "X2", "X3", "X4", "X5", "X6", "X7", "X8", "Y10", "Y11",
"Y12"
]:
pin = pyb.Pin(pin_name, pyb.Pin.OUT_PP) # set as output
pin.value(1) ## set high as default
# special treat for Reset
self.pin_reset = pyb.Pin("Y9", pyb.Pin.OUT_PP)
# Reset the device
self.pin_reset.value(1) ## do a hard reset
pyb.delay(10)
self.pin_reset.value(0) ## Low
pyb.delay(20)
self.pin_reset.value(1) ## set high again
pyb.delay(20)
#
# Now initialiize the LCD
# This is for the SSD1963 controller and two specific LCDs. More may follow.
# Data taken from the SSD1963 data sheet, SSD1963 Application Note and the LCD Data sheets
#
if controller == "SSD1963": # 1st approach for 480 x 272
TFT_io.tft_cmd_data(0xe2, bytearray(b'\x1d\x02\x54'),
3) # PLL multiplier, set PLL clock to 100M
# N=0x2D for 6.5MHz, 0x1D for 10MHz crystal
# PLLClock = Crystal * (Mult + 1) / (Div + 1)
# The intermediate value Crystal * (Mult + 1) must be between 250MHz and 750 MHz
TFT_io.tft_cmd_data(0xe0, bytearray(b'\x01'), 1) # PLL Enable
pyb.delay(10)
TFT_io.tft_cmd_data(0xe0, bytearray(b'\x03'), 1)
pyb.delay(10)
TFT_io.tft_cmd(0x01) # software reset
pyb.delay(10)
#
# Settings for the LCD
#
# The LCDC_FPR depends on PLL clock and the reccomended LCD Dot clock DCLK
#
# LCDC_FPR = (DCLK * 1048576 / PLLClock) - 1
#
# The other settings are less obvious, since the definitions of the SSD1963 data sheet and the
# LCD data sheets differ. So what' common, even if the names may differ:
# HDP Horizontal Panel width (also called HDISP, Thd). The value store in the register is HDP - 1
# VDP Vertical Panel Width (also called VDISP, Tvd). The value stored in the register is VDP - 1
# HT Total Horizontal Period, also called HP, th... The exact value does not matter
# VT Total Vertical Period, alco called VT, tv, .. The exact value does not matter
# HPW Width of the Horizontal sync pulse, also called HS, thpw.
# VPW Width of the Vertical sync pulse, also called VS, tvpw
# Front Porch (HFP and VFP) Time between the end of display data and the sync pulse
# Back Porch (HBP and VBP Time between the start of the sync pulse and the start of display data.
# HT = FP + HDP + BP and VT = VFP + VDP + VBP (sometimes plus sync pulse width)
# Unfortunately, the controller does not use these front/back porch times, instead it uses an starting time
# in the front porch area and defines (see also figures in chapter 13.3 of the SSD1963 data sheet)
# HPS Time from that horiz. starting point to the start of the horzontal display area
# LPS Time from that horiz. starting point to the horizontal sync pulse
# VPS Time from the vert. starting point to the first line
# FPS Time from the vert. starting point to the vertical sync pulse
#
# So the following relations must be held:
#
# HT > HDP + HPS
# HPS >= HPW + LPS
# HPS = Back Porch - LPS, or HPS = Horizontal back Porch
# VT > VDP + VPS
# VPS >= VPW + FPS
# VPS = Back Porch - FPS, or VPS = Vertical back Porch
#
# LPS or FPS may have a value of zero, since the length of the front porch is detemined by the
# other figures
#
# The best is to start with the recomendations of the lCD data sheet for Back porch, grab a
# sync pulse with and the determine the other, such that they meet the relations. Typically, these
# values allow for some ambuigity.
#
if lcd_type == "LB04301": # Size 480x272, 4.3", 24 Bit, 4.3"
#
# Value Min Typical Max
# DotClock 5 MHZ 9 MHz 12 MHz
# HT (Hor. Total 490 531 612
# HDP (Hor. Disp) 480
# HBP (back porch) 8 43
# HFP (Fr. porch) 2 8
# HPW (Hor. sync) 1
# VT (Vert. Total) 275 288 335
# VDP (Vert. Disp) 272
# VBP (back porch) 2 12
# VFP (fr. porch) 1 4
# VPW (vert. sync) 1 10
#
# This table in combination with the relation above leads to the settings:
# HPS = 43, HPW = 8, LPS = 0, HT = 531
# VPS = 14, VPW = 10, FPS = 0, VT = 288
#
self.disp_x_size = 479
self.disp_y_size = 271
TFT_io.tft_cmd_data_AS(0xe6, bytearray(b'\x01\x70\xa3'),
3) # PLL setting for PCLK
# (9MHz * 1048576 / 100MHz) - 1 = 94371 = 0x170a3
TFT_io.tft_cmd_data_AS(
0xb0,
bytearray( # # LCD SPECIFICATION
[
0x20, # 24 Color bits, HSync/VSync low, No Dithering
0x00, # TFT mode
self.disp_x_size >> 8,
self.disp_x_size & 0xff, # physical Width of TFT
self.disp_y_size >> 8,
self.disp_y_size & 0xff, # physical Height of TFT
0x00
]),
7) # Last byte only required for a serial TFT
TFT_io.tft_cmd_data_AS(
0xb4, bytearray(b'\x02\x13\x00\x2b\x08\x00\x00\x00'), 8)
# HSYNC, Set HT 531 HPS 43 HPW=Sync pulse 8 LPS 0
TFT_io.tft_cmd_data_AS(
0xb6, bytearray(b'\x01\x20\x00\x0e\x0a\x00\x00'), 7)
# VSYNC, Set VT 288 VPS 14 VPW 10 FPS 0
TFT_io.tft_cmd_data_AS(
0x36,
bytearray([(orientation & 1) << 5 | (h_flip & 1) << 1 |
(v_flip) & 1]), 1)
# rotation/ flip, etc., t.b.d.
elif lcd_type == "AT070TN92": # Size 800x480, 7", 18 Bit, lower color bits ignored
#
# Value Min Typical Max
# DotClock 26.4 MHz 33.3 MHz 46.8 MHz
# HT (Hor. Total 862 1056 1200
# HDP (Hor. Disp) 800
# HBP (back porch) 46 46 46
# HFP (Fr. porch) 16 210 254
# HPW (Hor. sync) 1 40
# VT (Vert. Total) 510 525 650
# VDP (Vert. Disp) 480
# VBP (back porch) 23 23 23
# VFP (fr. porch) 7 22 147
# VPW (vert. sync) 1 20
#
# This table in combination with the relation above leads to the settings:
# HPS = 46, HPW = 8, LPS = 0, HT = 1056
# VPS = 23, VPW = 10, VPS = 0, VT = 525
#
self.disp_x_size = 799
self.disp_y_size = 479
TFT_io.tft_cmd_data_AS(0xe6, bytearray(b'\x05\x53\xf6'),
3) # PLL setting for PCLK
# (33.3MHz * 1048576 / 100MHz) - 1 = 349174 = 0x553f6
TFT_io.tft_cmd_data_AS(
0xb0,
bytearray( # # LCD SPECIFICATION
[
0x00, # 18 Color bits, HSync/VSync low, No Dithering/FRC
0x00, # TFT mode
self.disp_x_size >> 8,
self.disp_x_size & 0xff, # physical Width of TFT
self.disp_y_size >> 8,
self.disp_y_size & 0xff, # physical Height of TFT
0x00
]),
7) # Last byte only required for a serial TFT
TFT_io.tft_cmd_data_AS(
0xb4, bytearray(b'\x04\x1f\x00\x2e\x08\x00\x00\x00'), 8)
# HSYNC, Set HT 1056 HPS 46 HPW 8 LPS 0
TFT_io.tft_cmd_data_AS(
0xb6, bytearray(b'\x02\x0c\x00\x17\x08\x00\x00'), 7)
# VSYNC, Set VT 525 VPS 23 VPW 08 FPS 0
TFT_io.tft_cmd_data_AS(
0x36,
bytearray([(orientation & 1) << 5 | (h_flip & 1) << 1 |
(v_flip) & 1]), 1)
# rotation/ flip, etc., t.b.d.
elif lcd_type == "AT090TN10": # Size 800x480, 9", 24 Bit, lower color bits ignored
#
# Value Min Typical Max
# DotClock 26.4 MHz 33.3 MHz 46.8 MHz
# HT (Hor. Total 862 1056 1200
# HDP (Hor. Disp) 800
# HBP (back porch) 46 46 46
# HFP (Fr. porch) 16 210 354
# HPW (Hor. sync) 1 40
# VT (Vert. Total) 510 525 650
# VDP (Vert. Disp) 480
# VBP (back porch) 23 23 23
# VFP (fr. porch) 7 22 147
# VPW (vert. sync) 1 20
#
# This table in combination with the relation above leads to the settings:
# HPS = 46, HPW = 8, LPS = 0, HT = 1056
# VPS = 23, VPW = 10, VPS = 0, VT = 525
#
self.disp_x_size = 799
self.disp_y_size = 479
TFT_io.tft_cmd_data_AS(0xe6, bytearray(b'\x05\x53\xf6'),
3) # PLL setting for PCLK
# (33.3MHz * 1048576 / 100MHz) - 1 = 349174 = 0x553f6
TFT_io.tft_cmd_data_AS(
0xb0,
bytearray( # # LCD SPECIFICATION
[
0x20, # 24 Color bits, HSync/VSync low, No Dithering/FRC
0x00, # TFT mode
self.disp_x_size >> 8,
self.disp_x_size & 0xff, # physical Width of TFT
self.disp_y_size >> 8,
self.disp_y_size & 0xff, # physical Height of TFT
0x00
]),
7) # Last byte only required for a serial TFT
TFT_io.tft_cmd_data_AS(
0xb4, bytearray(b'\x04\x1f\x00\x2e\x08\x00\x00\x00'), 8)
# HSYNC, Set HT 1056 HPS 46 HPW 8 LPS 0
TFT_io.tft_cmd_data_AS(
0xb6, bytearray(b'\x02\x0c\x00\x17\x08\x00\x00'), 7)
# VSYNC, Set VT 525 VPS 23 VPW 08 FPS 0
TFT_io.tft_cmd_data_AS(
0x36,
bytearray([(orientation & 1) << 5 | (h_flip & 1) << 1 |
(v_flip) & 1]), 1)
# rotation/ flip, etc., t.b.d.
else:
print("Wrong Parameter lcd_type: ", lcd_type)
return
TFT_io.tft_cmd_data_AS(0xBA, bytearray(b'\x0f'),
1) # GPIO[3:0] out 1
TFT_io.tft_cmd_data_AS(0xB8, bytearray(b'\x07\x01'),
1) # GPIO3=input, GPIO[2:0]=output
TFT_io.tft_cmd_data_AS(0xf0, bytearray(b'\x00'),
1) # Pixel data Interface 8 Bit
TFT_io.tft_cmd(0x29) # Display on
TFT_io.tft_cmd_data_AS(0xbe,
bytearray(b'\x06\xf0\x01\xf0\x00\x00'), 6)
# Set PWM for B/L
TFT_io.tft_cmd_data_AS(0xd0, bytearray(b'\x0d'),
1) # Set DBC: enable, agressive
else:
print("Wrong Parameter controller: ", controller)
return
#
# Set character printing defaults
#
self.text_font = None
self.setTextStyle(self.color, self.BGcolor, 0, None, 0)
#
# Init done. clear Screen and switch BG LED on
#
self.text_x = self.text_y = self.text_yabs = 0
self.clrSCR() # clear the display