def initiate(filename, lPath_auto):
#Basic settings and opening mesh-file.
#__________________ VhmCommand BEGIN __________________
var1 = VCmd.Activate(1, r"VHostManagerPlugin.VhmInterface", r"VhmCommand")
#__________________ SessionCommand BEGIN __________________
var2 = VCmd.Activate(1, r"VSessionManager.Command", r"SessionCommand")
#__________________ VEAction BEGIN __________________
var3 = VCmd.Activate(1, r"VToolKit.VSectionCutInterface", r"VEAction")
ret = VE.ChangeContext(r"Visual-RTM") #¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬remove evenetually
VE.SetActiveWindow(r"p1w1")
ret = VE.ChangeContext(r"Visual-Mesh")
ret = VE.ChangeSkin(r"General")
#__________________ ModelingTolerance BEGIN __________________
var4 = VCmd.Activate(0, r"VMeshModeler.VmmICommandGui",
r"ModelingTolerance")
VCmd.SetIntValue(var4, r"ScaleModelToMMSystem", 0)
VCmd.SetIntValue(var4, r"KeepFailedCADEntities", 1)
VCmd.SetIntValue(var4, r"CheckUnitFlagAndNameToScaleModel", 0)
VCmd.SetIntValue(var4, r"KeepBlankCADEntities", 1)
VCmd.SetIntValue(var4, r"CleanSelfIntersectingSurfaces", 1)
VCmd.SetIntValue(var4, r"StitchSurfaces", 1)
VCmd.SetIntValue(var4, r"SurfaceStitchToleranceOption", 1)
VCmd.SetIntValue(var4, r"CreatePartsByColor", 0)
VCmd.SetIntValue(var4, r"ReadSubFigAsPartsOrAsm", 4)
VCmd.SetIntValue(var4, r"RemovePointsAndCurves", 0)
VCmd.SetIntValue(var4, r"CadAccuracyLevel", 0)
VCmd.SetIntValue(var4, r"MergeLoopCurves", 1)
VCmd.Accept(var4)
VCmd.Quit(var4)
#__________________ ModelingTolerance END __________________
#__________________ ModelingTolerance BEGIN __________________
var5 = VCmd.Activate(0, r"VMeshModeler.VmmICommandGui",
r"ModelingTolerance")
VCmd.Quit(var5)
#__________________ ModelingTolerance END __________________
ret = VExpMngr.LoadFile(
lPath_auto + "\\catiafiles\\meshfiles\\" + filename, 4)
VE.SetCurrentPage(1)
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("initiated\n")
return (var1)
def initiate(RTMF, lPath_auto):
#Open the initial file saved before flow rate assignment.
var1 = VCmd.Activate(1, r"VHostManagerPlugin.VhmInterface", r"VhmCommand")
var2 = VCmd.Activate(1, r"VSessionManager.Command", r"SessionCommand")
var3 = VCmd.Activate(1, r"VToolKit.VSectionCutInterface", r"VEAction")
ret = VE.ChangeContext(r"Visual-RTM")
VE.SetActiveWindow(r"p1w1")
ret = VExpMngr.LoadFile(
lPath_auto + "\\pamrtm\\mainSimFiles\\" + RTMF + "_flowUnassigned.vdb",
0)
VE.SetCurrentPage(1)
ret = VE.ModelChange("M @0")
return (var1)
def simPar(resin, lPath_auto):
#Specify the RTM parameters.
VE.SetActiveWindow(r"p1w1")
ret = VE.ChangeContext(r"Visual-RTM")
var116 = VCmd.Activate(1, r"VRTMUtilities.VRTMInterface",
r"SimulationParameters")
VCmd.SetStringValue(var116, r"Physics", r"Heated Filling")
VCmd.SetDoubleValue(var116, r"InitialDegreeOfCure", 0.035)
VCmd.SetStringValue(var116, r"MaterialDB", r"User")
VCmd.SetStringValue(var116, r"InjectedResin", resin)
VCmd.SetIntValue(var116, r"DetectAirTraps", 1)
VCmd.Accept(var116)
VCmd.Quit(var116)
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("simulation parameters selected\n")
def getInit(RTMfile):
#This is typically run before all the other functions in here to initiate
#communication with the model.
var1=VCmd.Activate( 1, r"VHostManagerPlugin.VhmInterface", r"VhmCommand" )
var2=VCmd.Activate( 1, r"VSessionManager.Command", r"SessionCommand" )
var3=VCmd.Activate( 1, r"VToolKit.VSectionCutInterface", r"VEAction" )
ret=VE.ChangeContext( r"Visual-RTM" )
VE.SetActiveWindow( r"p1w1" )
ret=VExpMngr.LoadFile( r"D:\\IDPcode\\pamrtm\\mainSimFiles\\"+RTMfile+".vdb", 0 )
VE.SetCurrentPage( 1 )
ret=VE.ModelChange( "M @0" )
VScn.ExecutePythonInterpeter( r"C:\Program Files\ESI Group\Visual-Environment\15.0\COMMON\Resources\VisualProcessExec\user_scripts\CompositeLoadResult.py" )
import Viewer
Viewer.SetTHPdisplayOnOff( 0 )
VE.Command( r">>> fpmmarkersize(3)" )
Viewer.SetLogConstantInfo( 0.000000000100000000000000003643 , 1 )
def automesh(meshsize, RTMfile, RTMF, lPath_auto):
#Automatically generates mesh for the simulation.
ret = VE.ChangeContext(r"Visual-Mesh")
ret = VE.ChangeSkin(r"General")
VE.SetActiveWindow(r"p1w1")
#__________________ TopologyMesh BEGIN __________________
var6 = VCmd.Activate(1, r"VMeshModeler.VmmICommandGui", r"TopologyMesh")
#var7=VCmdGui.Create( r"VModelValidate.VCommandEleGeom" )
VCmd.SetObjectValue(var6, r"CurrentModel", "M @0")
VCmd.SetDoubleValue(var6, r"ElementSize", meshsize)
#VCmd.SetObjectValue( var6, r"SplitEdge1", NULL )
ret = VCmd.ExecuteCommand(var6, r"SetElementSizeToAllEdges")
VCmd.SetIntValue(var6, r"MeshType", 2)
VCmd.SetObjectValue(var6, r"SplitEdge1", NULL)
ret = VCmd.ExecuteCommand(var6, r"MeshAllFaces")
VCmd.Cancel(var6)
VistaDb.ModelSetExportKeyWordOrder("M @0", 0)
VistaDb.ModelSetExportStateAsNoInclude("M @0", 1)
VExpMngr.ExportFile(
lPath_auto + "\\pamrtm\\mainSimFiles\\" + RTMF + ".inp", 34)
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("meshed\n")
#automatically adjusted path
lPath_auto = r'D:\sysi'
with open(lPath_auto + "\\pamrtm\\mainsimfiles\\currentProgress.txt",
"a") as text_file:
text_file.write("The initial simulation starts here:")
#input file - instead function arguments - which are not possible due to the command line passing
fl = open(lPath_auto + "\\temporary\\RTM_in.txt", "rt")
flstr = fl.read()
RTMfile = flstr.split("---")[1]
#__________________ SessionCommand BEGIN __________________
var2 = VCmd.Activate(1, r"VSessionManager.Command", r"SessionCommand")
#__________________ VEAction BEGIN __________________
var3 = VCmd.Activate(1, r"VToolKit.VSectionCutInterface", r"VEAction")
ret = VE.ChangeContext(r"Visual-RTM")
VE.SetActiveWindow(r"p1w1")
ret = VExpMngr.LoadFile(
lPath_auto + "\\pamrtm\\mainsimfiles\\" + RTMfile + ".vdb", 0)
VE.SetCurrentPage(1)
ret = VE.ModelChange("M @0")
var4 = VCmd.Activate(1, r"VRTMUtilities.VRTMInterface", r"SolverManager")
ret = VCmd.ExecuteCommand(var4, r"RUN")
ret = VCmd.ExecuteCommand(var4, r"OpenLogFile")
VScn.ExecutePythonInterpeter(
r"C:\Program Files\ESI Group\Visual-Environment\15.0\COMMON\Resources\VisualProcessExec\user_scripts\CompositeLoadResult.py"
)
def asnSurf(var1, INITIAL, lPath_auto):
#For each section create a list of surfaces that correspond to it
#assign it as new part.
BCs = np.loadtxt(open(lPath_auto + "\\temporary\\braidsegments.csv", "rb"),
delimiter=",")
if INITIAL == 0:
surf_mat = np.load(lPath_auto + "\\temporary\\RTM_surfaces.npy")
elif INITIAL == 1:
surf_mat = np.load(lPath_auto + "\\temporary\\RTM_surfaces_2.npy")
else:
print("something went horribly wrong")
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("yupgogoyup\n")
refPTS = np.loadtxt(open("D:\\sysi\\temporary\\secPTS.csv", "rb"),
delimiter=",")
secVECz = np.loadtxt(open("D:\\sysi\\temporary\\secVECz.csv", "rb"),
delimiter=",")
secVECy = np.loadtxt(open("D:\\sysi\\temporary\\secVECy.csv", "rb"),
delimiter=",")
secPTS = refPTS
ret = VE.ChangeContext(r"Visual-RTM")
VE.SetActiveWindow(r"p1w1")
#The points section reference points are provided in local coordinate systems.
#Therefore the surface coordinate systems have to be also translated,
#globalToLocal function is used.
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("yupyup\n")
step = refPTS[0, 2]
u = 0
while u < np.size(surf_mat, 0):
uu = 0
while uu < np.size(refPTS, 0):
if refPTS[uu, 2] - step <= surf_mat[u, 3] <= refPTS[uu, 2] + step:
secVECx = np.cross(secVECy[uu, :], secVECz[uu, :])
cSYS2 = np.array(
([secVECx[0], secVECx[1], secVECx[2]
], [secVECy[uu, 0], secVECy[uu, 1], secVECy[uu, 2]],
[secVECz[uu, 0], secVECz[uu, 1], secVECz[uu, 2]]))
point1 = np.array([0, 0, 0])
point2 = np.array(
[secPTS[uu, 0], secPTS[uu, 1], secPTS[uu, 2]])
cSYS1 = np.array(([1, 0, 0], [0, 1, 0], [0, 0, 1]))
GCP = np.array(
[surf_mat[u, 1], surf_mat[u, 2], surf_mat[u, 3]])
kopyto = GlobalToLocal(point1, point2, cSYS1, cSYS2, GCP)
surf_mat[u, 1] = kopyto[0]
surf_mat[u, 2] = kopyto[1]
uu = uu + 1
u = u + 1
np.savetxt(lPath_auto + "\\Temporary\\verify_toolbox.csv",
surf_mat,
delimiter=",")
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("eaiho\n")
#Match surfaces to parts.
i = 0
US = []
while i < 240:
ii = 0
stringASN = " MFace "
while ii < np.size(surf_mat, 0):
if (BCs[i, 2] < surf_mat[ii, 1] < BCs[i, 1]) and (
BCs[i, 4] < surf_mat[ii, 2] <
BCs[i, 3]) and (BCs[i, 6] < surf_mat[ii, 3] < BCs[i, 5]):
stringASN = stringASN + r"@0/@" + str(int(surf_mat[ii,
0])) + " "
surf_mat = np.delete(surf_mat, (ii), axis=0)
ii = ii - 1
ii = ii + 1
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("ssssss" + stringASN + "\n")
if stringASN == " MFace ":
US.append(BCs[i, 0])
VE.SetCurrentPage(1)
ret = VE.ModelChange("M @0")
lst1_count, lst1 = VScn.List(" P 10000 ")
VCmd.SetObjectArrayValue(var1, r"GraphicSelection", lst1_count, lst1)
ret = VCmd.ExecuteCommand(var1, r"EndSelection")
VCmd.SetStringValue(var1, r"TargetName", r"Surface")
lst1_count, lst1 = VScn.List(" MFace @0/@1026 ")
VCmd.SetObjectArrayValue(var1, r"GraphicSelection", lst1_count, lst1)
lst1_count, lst1 = VScn.List(stringASN)
VCmd.SetObjectArrayValue(var1, r"GraphicSelection", lst1_count, lst1)
lst1_count, lst1 = VScn.List(stringASN)
VMaterial.VMeCadDataMove(lst1_count, lst1, NULL)
VExpMngr.RefreshExplorer(r"Parts")
VExpMngr.RefreshExplorer(r"Elements")
i = i + 1
with open(lPath_auto + "\\temporary\\RTM_surf_matRR.txt",
"w") as text_file:
text_file.write(str(surf_mat))
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("surfaces assigned\n")
VExpMngr.ExportFile(lPath_auto + "\\pamrtm\\mainSimFiles\\vcelkamaja.vdb",
0)
#Below adds flow mesh surface if already available.
if INITIAL == 1:
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("flow mesh surface 1\n")
FM_surf = np.load(r"D:\\sysi\\temporary\\FM_surfaces.npy")
ret = VE.ChangeContext(r"Visual-RTM")
VE.SetActiveWindow(r"p1w1")
ii = 0
stringASN = " MFace "
while ii < len(FM_surf):
stringASN = stringASN + r"@0/@" + str(int(FM_surf[ii, 0])) + " "
ii = ii + 1
#stringASN = stringASN+r"""" )""
VE.SetCurrentPage(1)
ret = VE.ModelChange("M @0")
lst1_count, lst1 = VScn.List(" P 10000 ")
VCmd.SetObjectArrayValue(var1, r"GraphicSelection", lst1_count, lst1)
ret = VCmd.ExecuteCommand(var1, r"EndSelection")
VCmd.SetStringValue(var1, r"TargetName", r"Surface")
lst1_count, lst1 = VScn.List(stringASN)
VCmd.SetObjectArrayValue(var1, r"GraphicSelection", lst1_count, lst1)
VMaterial.VMeCadDataMove(lst1_count, lst1, NULL)
VExpMngr.RefreshExplorer(r"Parts")
VExpMngr.RefreshExplorer(r"Elements")
with open(lPath_auto + "\\pamrtm\\mainSimFiles\\currentProgress.txt",
"a") as text_file:
text_file.write("flow mesh surfaces assigned\n")
VExpMngr.ExportFile(
lPath_auto + "\\pamrtm\\mainSimFiles\\broukpytlik.vdb", 0)
return (US)