def _appSingle(self):
print "程序列表："
print "--------------------"
i = 1
for app in self.appList:
print "%d. %s" % (i, app)
i += 1
# 程序编号
appCount = range(1, i)
while True:
opt = None
# 选择程序
print "请选择要配置的【程序】！"
slct = getDigit(appCount)
app = self.appList[slct - 1]
print "当前选择的程序为：%s，开始配置..." % app
rules = self.getConfPath(self.rulesPath, app)
for rule in rules:
instId = rule[0]
ip = rule[1]
port = rule[2]
toPath = rule[3] + app + '/conf/'
self._appOperate(app, ip, port, self.templatePath, toPath,
instId)
print "操作完成：继续【部署程序】请按1，返回【主页】请按其余数字。"
nextOpt = getDigit()
if nextOpt == 1:
continue
else:
break
def _appSingle(self):
print "程序列表："
print "--------------------"
i = 1
for app in self.appList:
print "%d. %s"%(i, app)
i += 1
# 程序编号
appCount = range(1, i)
while True:
opt = None
# 选择程序
print "请选择要配置的【程序】！"
slct = getDigit(appCount)
app = self.appList[slct-1]
print "当前选择的程序为：%s，开始配置..." % app
rules = self.getConfPath(self.rulesPath, app)
for rule in rules:
instId = rule[0]
ip = rule[1]
port = rule[2]
toPath = rule[3] + app + '/conf/'
self._appOperate(app, ip, port, self.templatePath, toPath, instId)
print "操作完成：继续【部署程序】请按1，返回【主页】请按其余数字。"
nextOpt = getDigit()
if nextOpt == 1:
continue
else:
break
def _appBat(self):
# app分类
webList = []
serviceList = []
gatewayList = []
for app in self.appList:
if "-web-" in app:
webList.append(app)
elif "-service-" in app:
serviceList.append(app)
elif "-gateway-" in app:
gatewayList.append(app)
else:
print "未知程序类型，请检查：%s" % app
print "请选择操作项！"
print "--------------------"
print "1.批量部署所有WEB应用"
print "2.批量部署所有Service"
print "3.批量部署所有Gateway"
print "0.批量部署所有应用"
print "--------------------"
slct = getDigit([0, 1, 2, 3])
if slct == 1:
self._appBat_Sub(webList)
elif slct == 2:
self._appBat_Sub(serviceList)
elif slct == 3:
self._appBat_Sub(gatewayList)
elif slct == 0:
self._appBat_Sub(self.appList)
else:
print red("未知错误，请检查！")
def main(self):
# local("clear")
# print AppControl.__doc__
while True:
print "请选择操作项！"
print "--------------------"
print "1. 部署单个程序"
print "2. 批量部署程序"
print "0. 退出"
print "--------------------"
slct = getDigit([0, 1, 2])
if (slct == 0):
print "输入%d,选择【退出】" % slct
break
elif (slct == 1):
print "输入%d,选择【部署单个程序】" % slct
self._appSingle()
elif (slct == 2):
print "输入%d,选择：【批量部署程序】" % slct
self._appBat()
else:
print red("xxxxxxxx出现未知错误，请检查！xxxxxxxx")
break
# local("clear")
print "已返回到启动【主页】"
def main(self):
# local("clear")
# print AppControl.__doc__
while True:
print "请选择操作项！"
print "--------------------"
print "1. 操作单个程序"
print "2. 批量操作程序"
print "0. 退出"
print "--------------------"
slct = getDigit([0, 1, 2])
if (slct == 0):
print "输入%d,选择【退出】"%slct
break
elif (slct == 1):
print "输入%d,选择【操作单个程序】"%slct
self._appSingle()
elif (slct == 2):
print "输入%d,选择：【批量操作程序】"%slct
self._appBat()
else:
print red("xxxxxxxx出现未知错误，请检查！xxxxxxxx")
break
# local("clear")
print "已返回到启动【主页】"
def _appBat(self):
# app分类
webList = []
serviceList = []
gatewayList = []
for app in self.appList:
if "-web-" in app:
webList.append(app)
elif "-service-" in app:
serviceList.append(app)
elif "-gateway-" in app:
gatewayList.append(app)
else:
print red("未知程序类型，请检查：%s" % app)
print "请选择操作项！"
print "--------------------"
print "1.批量操作所有WEB应用"
print "2.批量操作所有Service"
print "3.批量操作所有Gateway"
print "0.批量操作所有应用"
print "--------------------"
slct = getDigit([0,1,2,3])
if slct == 1:
self._appBat_Sub(webList)
elif slct == 2:
self._appBat_Sub(serviceList)
elif slct == 3:
self._appBat_Sub(gatewayList)
elif slct == 0:
self._appBat_Sub(self.appList)
else:
print red("未知错误，请检查！")
def _appSingle(self):
print "程序列表："
print "--------------------"
i = 1
for app in self.appList:
print "%d. %s"%(i, app)
i += 1
# 程序编号
appCount = range(1, i)
while True:
opt = None
# 选择程序
print "请选择要操作的【程序】！"
slct = getDigit(appCount)
app = self.appList[slct-1]
print "当前选择的程序为：%s" % app
# 选择操作
while True:
appOpt = raw_input("请选择操作：启动【L】，停止【S】，重启【R】，重新选择【P】")
rules = self.getConfPath(self.rulesPath, app)
if appOpt.upper() == 'L':
for rule in rules:
self._start(rule[1], app)
elif appOpt.upper() == 'S':
for rule in rules:
self._stop(rule[1], app)
elif appOpt.upper() == 'R':
for rule in rules:
self._restart(rule[1], app)
elif appOpt.upper() == 'P':
opt = 'P'
else:
print red("输入错误，请重新选择操作！")
continue
# 操作完成，跳出操作选择
break
if opt == 'P':
continue
print "操作完成：继续【选择程序】请按1，返回【主页】请按其余数字。"
nextOpt = getDigit()
if nextOpt == 1:
continue
else:
break
def _appSingle(self):
print "程序列表："
print "--------------------"
i = 1
for app in self.appList:
print "%d. %s" % (i, app)
i += 1
# 程序编号
appCount = range(1, i)
while True:
opt = None
# 选择程序
print "请选择要操作的【程序】！"
slct = getDigit(appCount)
app = self.appList[slct - 1]
print "当前选择的程序为：%s" % app
# 选择操作
while True:
appOpt = raw_input("请选择操作：启动【L】，停止【S】，重启【R】，重新选择【P】")
rules = self.getConfPath(self.rulesPath, app)
if appOpt.upper() == 'L':
for rule in rules:
self._start(rule[1], app)
elif appOpt.upper() == 'S':
for rule in rules:
self._stop(rule[1], app)
elif appOpt.upper() == 'R':
for rule in rules:
self._restart(rule[1], app)
elif appOpt.upper() == 'P':
opt = 'P'
else:
print red("输入错误，请重新选择操作！")
continue
# 操作完成，跳出操作选择
break
if opt == 'P':
continue
print "操作完成：继续【选择程序】请按1，返回【主页】请按其余数字。"
nextOpt = getDigit()
if nextOpt == 1:
continue
else:
break
def _appSingle(self):
print "程序列表："
print "--------------------"
i = 1
for app in self.appList:
print "%d. %s" % (i, app)
i += 1
# 程序编号
appCount = range(1, i)
while True:
opt = None
# 选择程序
print "请选择要操作的【程序】！"
slct = getDigit(appCount)
app = self.appList[slct - 1]
print "当前选择的程序为：%s" % app
# 选择操作
while True:
appOpt = raw_input("请选择操作：安装【I】，卸载【D】，更新【U】，强制更新【F】，重新选择【P】")
rules = self.getConfPath(self.rulesPath, app)
if appOpt.upper() in ['I', 'D', 'U', 'F']:
for rule in rules:
self._appOperate(rule[1], app, appOpt)
elif appOpt.upper() == 'P':
opt = 'P'
else:
print red("输入错误，请重新选择操作！")
continue
# 操作完成，跳出操作选择
break
if opt == 'P':
continue
print "操作完成：继续【部署程序】请按1，返回【主页】请按其余数字。"
nextOpt = getDigit()
if nextOpt == 1:
continue
else:
break
def _appSingle(self):
print "程序列表："
print "--------------------"
i = 1
for app in self.appList:
print "%d. %s"%(i, app)
i += 1
# 程序编号
appCount = range(1, i)
while True:
opt = None
# 选择程序
print "请选择要操作的【程序】！"
slct = getDigit(appCount)
app = self.appList[slct-1]
print "当前选择的程序为：%s" % app
# 选择操作
while True:
appOpt = raw_input("请选择操作：安装【I】，卸载【D】，更新【U】，强制更新【F】，重新选择【P】")
rules = self.getConfPath(self.rulesPath, app)
if appOpt.upper() in ['I', 'D', 'U', 'F']:
for rule in rules:
self._appOperate(rule[1], app, appOpt)
elif appOpt.upper() == 'P':
opt = 'P'
else:
print red("输入错误，请重新选择操作！")
continue
# 操作完成，跳出操作选择
break
if opt == 'P':
continue
print "操作完成：继续【部署程序】请按1，返回【主页】请按其余数字。"
nextOpt = getDigit()
if nextOpt == 1:
continue
else:
break
