import numpy as np
from tkinter import messagebox
from Channels_multilayer import Channel
g=Channel(wl=0.64,pas=0.1,nc=1., nc_2=1., nc_3=1.,Hc=0.8,\
LB=5, LC=3.2,LB_R=5,n1B=1.,n1C=1.620,n1D=1.,H1=2.3,\
n2B=1.62,n2C=1.62,n2D=1.62,H2=0.9,\
nsub=1.61,nsub_2=1.61,nsub_3=1.61,Hsub=2.,OR=4)
print("All units are in \u03BCm")
m = 1
lam = 0.64
theta = np.arange(0, 90, 0.01)
#theta = theta.tolist()
# print (theta)
# print((g.NumOf_guidedModes(Nmodes=10)))
# print((g.NumOf_guidedModes(Nmodes=10)[1:]))
just_Modes = ((g.NumOf_guidedModes(Nmodes=5)[1:]))
# print(np.amax(g.NumOf_guidedModes(Nmodes=10)[1:]))
# print(np.amin(g.NumOf_guidedModes(Nmodes=10)[1:]))
# print ("The angles are is "+str(theta))
n_top = 1.0 # float(input("Please inter refractive index of cover layer: "))
n_guiding = 1.62 # float(input("Please inter refractive index of guding layer: "))
n_bottom = 1.61 # float(input("Please inter refractive index of guding layer: "))
grating_period = 1000 / 1200 #np.arange(0.2,2,0.01)#float(input("Please inter grating period "))
def Nmode_effective(one_theta):
n_e = ((n_top * (np.sin(np.rad2deg(one_theta)))) +
(m * (lam / grating_period)))
return n_e
class Mul_Ch_Wav_Mod_Sol(Frame):
'''Help on Class multilayer channel waveguide mode solver:
Usage:
It can be used to solve light confinement modes inside a channel dielectric chiral structure.
'''
def __init__(self, master):
super().__init__(master)
self.master = master
self.grid()
self.place()
# creat variable to be updated by the user
self.vnc1 = DoubleVar()
self.vnc1.set(1.)
self.vnc2 = DoubleVar()
self.vnc2.set(1.)
self.vnc3 = DoubleVar()
self.vnc3.set(1.)
self.vnL1_1 = DoubleVar()
self.vnL1_1.set(1.)
self.vnL1_2 = DoubleVar()
self.vnL1_2.set(1.62)
self.vnL1_3 = DoubleVar()
self.vnL1_3.set(1.)
self.vnL2_1 = DoubleVar()
self.vnL2_1.set(1.62)
self.vnL2_2 = DoubleVar()
self.vnL2_2.set(1.62)
self.vnL2_3 = DoubleVar()
self.vnL2_3.set(1.62)
self.vnSub1 = DoubleVar()
self.vnSub1.set(1.61)
self.vnSub2 = DoubleVar()
self.vnSub2.set(1.61)
self.vnSub3 = DoubleVar()
self.vnSub3.set(1.61)
self.vTL1 = DoubleVar()
self.vTL1.set(2.3)
self.vTL2 = DoubleVar()
self.vTL2.set(2.)
self.vTc = DoubleVar()
self.vTc.set(3.1)
self.vWL = DoubleVar()
self.vWL.set(0.64)
self.vOR = DoubleVar()
self.vOR.set(4.0)
self.vVaryH1LC_H1 = StringVar()
self.vVaryH1LC_H1.set('1.0 to 4.0')
self.vVaryH1LC_LC = StringVar()
self.vVaryH1LC_LC.set('1.5 to 5.0')
self.vVaryH1LC_H2 = DoubleVar()
self.vVaryH1LC_H2.set(1.0)
self.vVaryH1LC_SaveAs = StringVar()
self.vVaryH1LC_SaveAs.set('Filename')
self.vSimulat = DoubleVar()
self.vSimulat.set(np.zeros((1, 1)))
self.vgrating_period = DoubleVar()
self.vgrating_period.set(0.83)
self.vdiffraction_mode = DoubleVar()
self.vdiffraction_mode.set(1)
self.vNmodes = IntVar()
self.vNmodes.set(2)
#self.vVaryH1LC_SaveAs_loc = StringVar();self.vVaryH1LC_SaveAs_loc.set('C:/Users/Home')#location to save
self.create_labels()
self.create_Entrys()
self.create_buttons()
def create_Entrys(self):
'''Here all the entries are defined'''
self.nCover_1 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnc1)
self.nCover_1.grid(row=1, column=3, padx=5, pady=5)
self.nCover_2 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnc2)
self.nCover_2.grid(row=1, column=2, padx=5, pady=5)
self.nCover_3 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnc3)
self.nCover_3.grid(row=1, column=1, padx=5, pady=5)
self.nLayer1_1 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnL1_1)
self.nLayer1_1.grid(row=2, column=3, padx=5, pady=5)
self.nLayer1_2 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnL1_2)
self.nLayer1_2.grid(row=2, column=2, padx=5, pady=5)
self.nLayer1_3 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnL1_3)
self.nLayer1_3.grid(row=2, column=1, padx=5, pady=5)
self.nLayer2_1 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnL2_1)
self.nLayer2_1.grid(row=3, column=3, padx=5, pady=5)
self.nLayer2_2 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnL2_2)
self.nLayer2_2.grid(row=3, column=2, padx=5, pady=5)
self.nLayer2_3 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnL2_3)
self.nLayer2_3.grid(row=3, column=1, padx=5, pady=5)
self.nSubstrate_1 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnSub1)
self.nSubstrate_1.grid(row=4, column=3, padx=5, pady=5)
self.nSubstrate_2 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnSub2)
self.nSubstrate_2.grid(row=4, column=2, padx=5, pady=5)
self.nSubstrate_3 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vnSub3)
self.nSubstrate_3.grid(row=4, column=1, padx=5, pady=5)
self.Thickness_Layer_1 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vTL1)
self.Thickness_Layer_1.grid(row=2, column=4, padx=5, pady=5)
self.Thickness_Layer_2 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vTL2)
self.Thickness_Layer_2.grid(row=3, column=4, padx=5, pady=5)
self.Thickness_channel = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vTc)
self.Thickness_channel.grid(row=6, column=2, padx=5, pady=5)
self.Wavelength = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vWL)
self.Wavelength.grid(row=6, column=5, padx=5, pady=5)
self.Optical_rotation = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vOR)
self.Optical_rotation.grid(row=8, column=5, padx=5, pady=5)
self.VaryH1LC_H1 = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vVaryH1LC_H1)
self.VaryH1LC_H1.grid(row=13, column=1, padx=5, pady=5)
self.VaryH1LC_LC = Entry(self,
width=10,
borderwidth=5,
textvariable=self.vVaryH1LC_LC)
self.VaryH1LC_LC.grid(row=13, column=3, padx=5, pady=5)
self.VaryH1LC_H2 = Entry(self,
width=5,
borderwidth=5,
textvariable=self.vVaryH1LC_H2)
self.VaryH1LC_H2.grid(row=13, column=6, padx=5, pady=5)
self.VaryH1LC_SaveAs = Entry(self.labelFrame1,
width=10,
borderwidth=5,
textvariable=self.vVaryH1LC_SaveAs)
self.VaryH1LC_SaveAs.grid(row=15, column=3, padx=5, pady=5)
self.diffraction_mode_E = Entry(self,
width=5,
borderwidth=5,
textvariable=self.vdiffraction_mode)
self.diffraction_mode_E.grid(row=16, column=5, padx=5, pady=5)
self.grating_period_E = Entry(self,
width=5,
borderwidth=5,
textvariable=self.vgrating_period)
self.grating_period_E.grid(row=17, column=5, padx=5, pady=5)
self.NModes_E = Entry(self,
width=5,
borderwidth=5,
textvariable=self.vNmodes)
self.NModes_E.grid(row=10, column=5, padx=5, pady=5)
#self.Simulat_file = Entry(self, width=10, borderwidth=5, textvariable=self.vSimulat_file);self.Simulat_file.grid(row=14, column=6, padx=5, pady=5)
########
self.nC_1 = float(self.nCover_1.get())
self.nC_2 = float(self.nCover_2.get())
self.nC_3 = float(self.nCover_3.get())
self.nL1_1 = float(self.nLayer1_1.get())
self.nL1_2 = float(self.nLayer1_2.get())
self.nL1_3 = float(self.nLayer1_3.get())
self.nL2_1 = float(self.nLayer2_1.get())
self.nL2_2 = float(self.nLayer2_2.get())
self.nL2_3 = float(self.nLayer2_3.get())
self.nSub_1 = float(self.nSubstrate_1.get())
self.nSub_2 = float(self.nSubstrate_2.get())
self.nSub_3 = float(self.nSubstrate_3.get())
self.TL_2 = float(self.Thickness_Layer_2.get())
self.TL_1 = float(self.Thickness_Layer_1.get())
self.TChan = float(self.Thickness_channel.get())
self.WL = float(self.Wavelength.get())
self.OPR = float(self.Optical_rotation.get())
self.VaryH1LC_H1_array = self.VaryH1LC_H1.get()
self.VaryH1LC_LC_array = self.VaryH1LC_LC.get()
self.VaryH1LC_H2_Value = float(self.VaryH1LC_H2.get())
# print(self.VaryH1LC_H1_array)
self.H1_1 = np.fromstring(self.VaryH1LC_H1_array,
dtype=float,
sep='to')[0]
self.H1_2 = np.fromstring(self.VaryH1LC_H1_array,
dtype=float,
sep='to')[1]
self.LC_1 = np.fromstring(self.VaryH1LC_LC_array,
dtype=float,
sep='to')[0]
self.LC_2 = np.fromstring(self.VaryH1LC_LC_array,
dtype=float,
sep='to')[1]
#for the grating coupler
self.filename = self.VaryH1LC_SaveAs.get()
self.grating_period = float(self.grating_period_E.get())
self.diffraction_mode = int(self.diffraction_mode_E.get())
self.Nmodes_value = int(self.NModes_E.get())
def create_labels(self):
'''Here all the labels are defined'''
Label(self, text="Refractive indices").grid(row=0, column=2)
Label(self, text=" Thickness").grid(row=0, column=4)
Label(self, text='\u03BCm' + " (H1)", font='Verdana 10').place(x=400,
y=63)
Label(self, text='\u03BCm' + " (H2)", font='Verdana 10').place(x=400,
y=100)
Label(self, text="Cover").grid(row=1)
Label(self, text="Layer 2").grid(row=2)
Label(self, text="Layer 1").grid(row=3)
Label(self, text="Substrate").grid(row=4)
Label(self, text=" Channel (LC)").grid(row=5, column=2)
Label(self, text='\u03BCm',
font='Verdana 10').place(x=225, y=195) # unicode careters
Label(self, text="").grid(row=7)
Label(self, text="").grid(row=8)
Label(self, text="").grid(row=9) #to creat space
Label(self, text="").grid(row=10)
Label(self, text="").grid(row=11)
Label(self, text="").grid(row=12)
Label(self, text="").grid(row=13)
Label(self, text="").grid(row=14)
Label(self, text="").grid(row=15)
Label(self, text="").grid(row=16)
Label(self, text="").grid(row=17)
Label(self, text="").grid(row=18)
Label(self, text=' \u03BB',
font='Verdana 10').place(x=420, y=172) # unicode careters
Label(self, text='\u03BCm', font='Times 12').place(x=480, y=195)
Label(self, text=" OR",
font='Times 12').place(x=415, y=230) # unicode careters
Label(self, text=u'\u2070/mm',
font='Verdana 10').place(x=480, y=255) # unicode careters
self.labelFrame = LabelFrame(self, text="Choose file\nto plot")
self.labelFrame.grid(
column=5,
row=14) #######################################################
self.labelFrame1 = LabelFrame(self, text="Save as")
self.labelFrame1.grid(column=2, row=14)
#create the structure
Label(self, text="<---- LC ---->").place(x=81, y=235)
Label(self, text="-" * 15).place(x=80, y=250)
Label(self, text="|").place(x=80, y=258)
Label(self, text="|").place(x=157, y=258)
Label(self, text="|").place(x=80, y=275)
Label(self, text="|").place(x=157, y=275)
Label(self, text="-" * 15).place(x=170, y=285)
Label(self, text="\u2191", font=10).place(x=165, y=253)
Label(self, text="\u2193", font=10).place(x=165, y=271)
Label(self, text="H1").place(
x=165, y=268.5
) # "H\u2081" H Subscript 1, Superscript is \uu207x(1,2,3...)
Label(self, text="-" * 15).place(x=1, y=282)
Label(self, text="-" * 50).place(x=1, y=320)
Label(self, text="\u2191", font=10).place(x=245, y=288)
Label(self, text="\u2193", font=10).place(x=245, y=306)
Label(self, text="H2").place(x=245, y=303.5)
Label(self, text="Vary\nH1 (\u03BCm) =").place(x=0, y=375)
Label(self, text="Vary\nLC (\u03BCm) =").place(x=180, y=375)
Label(self, text="@ constant H2 (\u03BCm) =").place(x=360, y=390)
#Label(self, text="Save as:", font="Calibri 15").place(x=165, y=405)
# Label(self, text="Choose file to plot", font="Calibri 12").place(x=365, y=405)
Label(self, text="Diffraction mode # =").place(x=300, y=560)
Label(self, text="Grating period (\u039B) =").place(x=305, y=595)
Label(self, text="# of modes =").place(x=340, y=310)
def create_buttons(self):
'''Here all the buttons are defined'''
Button(self,
text="Plot_indices",
fg='green',
command=self.Plot_indices).grid(row=18, column=3)
Button(self, text="Solve", fg='green',
command=self.Solve).grid(row=18, column=2)
Button(self, text="Close", fg='red',
command=self.close_all).grid(row=18, column=0)
Button(self, text="Close plots", fg='red',
command=self.close_plots).grid(row=18, column=1)
Button(self, text="Simulate", fg='Green',
command=self.Simulate).grid(row=14, column=1)
# Button(self, text="Plot image map\nof the simulation", fg='Green', command="").place(x=365, y=435)
Button(self.labelFrame, text="Browse A File",
command=self.fileDialog).grid(
row=14, column=6
) #######################################################
Button(self.labelFrame,
text="Plot Ecc.",
command=self.plot_simulate_ecc).grid(row=15, column=6)
Button(self.labelFrame,
text="Plot \u0394n",
command=self.plot_simulate_dn).grid(row=16, column=6)
Button(self,
text="Coupling \u03B8",
fg='green',
command=self.NumOf_guided_modes).grid(row=18,
column=5) #grating
#Button(self.labelFrame1, text="Browse\n directory", command=self.fileDialog_saveas).grid(row=14, column=3)
def Plot_indices(self):
'''This method plots refractive index of the structure'''
self.create_Entrys()
self.g = Channel(wl=self.WL, pas=0.1, \
nc=self.nC_1, nc_2=self.nC_2, nc_3=self.nC_3, Hc=0.8, \
LC=self.TChan, LB=5., LB_R=5., \
n1B=self.nL1_1, n1C=self.nL1_2, n1D=self.nL1_3, H1=self.TL_1, \
n2B=self.nL2_1, n2C=self.nL2_2, n2D=self.nL2_3, H2=self.TL_2, \
nsub=self.nSub_1, nsub_2=self.nSub_2, nsub_3=self.nSub_3, Hsub=2.,
OR=self.OPR)
self.g.Traceindice()
def fileDialog_saveas(self): # to browse locaation of a file
self.vVaryH1LC_SaveAs_loc = filedialog.askdirectory(
initialdir="", title="Select the location"
) #(("all files", "*.*"), ("csv files", "*.csv")))
def fileDialog(self): # to brows the file
'''This method gets the calls the location of a file from user call'''
self.vSimulat = filedialog.askopenfilename(
initialdir="",
title="Select A File",
filetype=(("all files", "*.*"), (
"csv files",
"*.csv"))) #(("all files", "*.*"), ("csv files", "*.csv")))
self.df = pd.read_csv(self.vSimulat, sep=' ', comment='#', header=None)
self.dr = self.df.to_numpy()
#print(self.filename)
def plot_simulate_ecc(self):
'''This method plots eccentricity of the simulated data in the file called by the method fileDialog'''
self.create_Entrys()
fig, ax = plt.subplots(figsize=(8, 6))
#plt.title("Eccentricy as a function of channel dimensions")
print("Optcal rotaion is: " + str(self.OPR))
self.DnCB = ((0.001 * (self.WL) * self.OPR) / 180
) #CB=self.OPR*1e-3/180*self.WL
print("Circular bireferengence (CB) is: " + str(self.DnCB))
im = plt.imshow(self.DnCB /
(self.dr + np.sqrt(self.DnCB**2 + self.dr**2)),
extent=[self.LC_1, self.LC_2, self.H1_1, self.H1_2],
origin='lower')
plt.xlabel("H1 (\u03BCm)")
plt.ylabel("LC (\u03BCm)")
divider = make_axes_locatable(ax)
cax = divider.new_vertical(size="5%", pad=0.4, title="Eccentricity")
fig.add_axes(cax)
fig.colorbar(im, cax=cax, orientation="horizontal")
####################################################################################################### mshu x y labela wash karw
# plt.savefig('colorbar_positioning_03.png', format='png', bbox_inches='tight')
plt.hot()
plt.show()
plt.close()
def printt(self):
print(self.filename)
def plot_simulate_dn(self):
'''This method plots modal birefringence of the simulated data in the file called by the method fileDialog'''
self.create_Entrys()
fig, ax = plt.subplots(figsize=(8, 6))
#plt.title("Modal bireferengence as a function of channel dimensions")
im = plt.imshow(self.dr,
extent=[self.LC_1, self.LC_2, self.H1_1, self.H1_2],
origin='lower')
plt.xlabel("H1 (\u03BCm)")
plt.ylabel("LC (\u03BCm)")
divider = make_axes_locatable(ax)
cax = divider.new_vertical(size="5%",
pad=0.4,
title="Modal bireferengence")
fig.add_axes(cax)
fig.colorbar(im, cax=cax, orientation="horizontal")
# plt.savefig('colorbar_positioning_03.png', format='png', bbox_inches='tight')
plt.hot()
plt.show()
plt.close()
def close_all(self):
'''This method closes everything it just has self.master.destroy() and plt.close('all')'''
self.master.destroy()
plt.close('all')
def Solve(self):
self.create_Entrys()
self.g = Channel(wl=self.WL, pas=0.1, \
nc=self.nC_1, nc_2=self.nC_2, nc_3=self.nC_3, Hc=0.8, \
LC=self.TChan, LB=5., LB_R=5., \
n1B=self.nL1_1, n1C=self.nL1_2, n1D=self.nL1_3, H1=self.TL_1, \
n2B=self.nL2_1, n2C=self.nL2_2, n2D=self.nL2_3, H2=self.TL_2, \
nsub=self.nSub_1, nsub_2=self.nSub_2, nsub_3=self.nSub_3, Hsub=2.,
OR=self.OPR)
self.g.Calcule(Nmodes=self.Nmodes_value)
#self.g.Intensite()
plt.show()
def NumOf_guided_modes(
self): # This will print angles which can give coupled light.
'''This method finds any differaction mode of a grating that matches
with the guided modes of the structure and returns the angle'''
self.create_Entrys()
print(
"Coupling neff is calculated with equation\n n_eff=n_top.sin(\u03B8) + (m.(\u03BB/\u039B) \n where "
"n_eff is effective refractive index, n_top is refractive index of the cover\n"
"\u03B8 is coupling angle,m is diffraction mode, \u03BB is wavelength, and \u039B is grating period"
)
self.g = Channel(wl=self.WL, pas=0.1, \
nc=self.nC_1, nc_2=self.nC_2, nc_3=self.nC_3, Hc=0.8, \
LC=self.TChan, LB=5., LB_R=5., \
n1B=self.nL1_1, n1C=self.nL1_2, n1D=self.nL1_3, H1=self.TL_1, \
n2B=self.nL2_1, n2C=self.nL2_2, n2D=self.nL2_3, H2=self.TL_2, \
nsub=self.nSub_1, nsub_2=self.nSub_2, nsub_3=self.nSub_3, Hsub=2.,
OR=self.OPR)
if self.g.NmaxPlan(
) == 0: # blow H2==0.9 NmaxPlan is 0 and it does not give good value.
messagebox.showinfo(
"Hey",
'It looks like NmaxPlan is {}'.format(self.g.NmaxPlan()))
pass
else:
#print("neff of the guided modes of the structure are: {}".format(self.g.NumOf_guidedModes(Nmodes=self.Nmodes_value)[1:]))
#just_Modes = ((self.g.NumOf_guidedModes(Nmodes=self.Nmodes_value)[1:]))
# theta = np.arange(0, 90, 0.001)# array of angles in degrees
# All_n_effectives_are = np.around(self.Nmode_effective(theta), decimals=4)#around function round to 4 decimals and neglect the rest.
# guided_modes_n_effectives_are_array = np.where((np.where(
# All_n_effectives_are <= (np.amax(just_Modes)), All_n_effectives_are, 0)) >= (np.amin(just_Modes)),
# All_n_effectives_are, 0)
# guided_modes_n_effectives_are_index = np.where(guided_modes_n_effectives_are_array > 0)
# guided_modes_n_effectives_are = All_n_effectives_are[guided_modes_n_effectives_are_index]
# guided_modes_n_effectives_theta_are = np.around(theta[guided_modes_n_effectives_are_index], decimals=1)
# s = guided_modes_n_effectives_are.size
#effective_modes=np.real((self.g.NumOf_guidedModes(Nmodes=self.Nmodes_value)[1:]))
# print((self.g.NumOf_guidedModes(Nmodes=self.Nmodes_value)[1]))
for i in np.real(
(self.g.NumOf_guidedModes(Nmodes=self.Nmodes_value)[1:])):
print(
"For the {} mode there is one coupling angle at {}".format(
i, self.Nmode_effective(i)))
# else:
# messagebox.showinfo("Sorry",'The is no coupling angle that match with guided modes')
def Nmode_effective(
self, n_eff
): # to find n_e that is effective refractive index of the grating
'''This method returns guided modes of the structure (not leaky modes)'''
self.create_Entrys()
#print(self.grating_period,self.diffraction_mode)
n_top = np.average(np.array([self.nC_1, self.nC_2, self.nC_3]))
if ((n_eff - (self.diffraction_mode *
(self.WL / self.grating_period))) / (n_top)) > 1:
theta = 0
elif ((n_eff - (self.diffraction_mode *
(self.WL / self.grating_period))) / (n_top)) < 0:
theta = 0
else:
theta = np.rad2deg(
np.arcsin(
(n_eff - (self.diffraction_mode *
(self.WL / self.grating_period))) / (n_top)))
#n_e = ((n_top * (np.sin(np.rad2deg(one_theta)))) + (float(self.diffraction_mode) * (float(self.WL)/float(self.grating_period))))#n_top= np.average(np.arange(float(self.nC_1),float(self.nC_2),float(self.nC_3)))
return theta
def Simulate(self):
'''This method finds modal birefringence of the structure
and simulates this for the defined channel dimentions'''
self.create_Entrys()
if messagebox.askyesno(
"Warning! ",
'This may take several minutes\n Are you sure you want to continue?'
):
messagebox.showinfo(
"Simulation",
'You can see the see the remaining time in the run window')
self.g = Channel(wl=0.64, pas=0.1, \
nc=1, nc_2=1, nc_3=1, Hc=0.8, \
LC=3.1, LB=5., LB_R=5., \
n1B=1, n1C=1.62, n1D=1, H1=2.3, \
n2B=1.62, n2C=1.62, n2D=1.62, H2=2, \
nsub=1.61, nsub_2=1.61, nsub_3=1.61, Hsub=2.,
OR=4)
self.g.H2 = self.VaryH1LC_H2_Value
self.g.VariaXY(X0=self.LC_1,
X1=self.LC_2,
dX=0.1,
Y0=self.H1_1,
Y1=self.H1_2,
dY=0.1,
fich=str(self.filename))
else:
messagebox.showinfo(
"Canceled", 'You have successfully canceled the simulation')
def close_plots(self):
plt.close('all')
class Mul_Ch_Wav_Mod_Sol(Frame):
def __init__(self, master):
super().__init__(master)
self.master = master
Frame.__init__(self, self.master)
self.configure_gui()
self.create_widgets()
def configure_gui(self):
# creates variable to be updated by the user. values are further obtained by the .get() method
self.nC_1 = DoubleVar()
self.nC_1.set(1.)
self.nC_2 = DoubleVar()
self.nC_2.set(1.)
self.nC_3 = DoubleVar()
self.nC_3.set(1.)
self.nL1_1 = DoubleVar()
self.nL1_1.set(1.)
self.nL1_2 = DoubleVar()
self.nL1_2.set(1.62)
self.nL1_3 = DoubleVar()
self.nL1_3.set(1.)
self.nL2_1 = DoubleVar()
self.nL2_1.set(1.62)
self.nL2_2 = DoubleVar()
self.nL2_2.set(1.62)
self.nL2_3 = DoubleVar()
self.nL2_3.set(1.62)
self.nSub_1 = DoubleVar()
self.nSub_1.set(1.61)
self.nSub_2 = DoubleVar()
self.nSub_2.set(1.61)
self.nSub_3 = DoubleVar()
self.nSub_3.set(1.61)
self.TL_1 = DoubleVar()
self.TL_1.set(2.3)
self.TL_2 = DoubleVar()
self.TL_2.set(2.)
self.TChan = DoubleVar()
self.TChan.set(3.1)
self.WL = DoubleVar()
self.WL.set(0.64)
self.OPR = DoubleVar()
self.OPR.set(1.97)
self.vVaryH1LC_H1 = StringVar()
self.vVaryH1LC_H1.set('1.0 to 4.0')
self.vVaryH1LC_LC = StringVar()
self.vVaryH1LC_LC.set('1.5 to 5.0')
self.vVaryH1LC_H2 = DoubleVar()
self.vVaryH1LC_H2.set(1.0)
self.vVaryH1LC_SaveAs = StringVar()
self.vVaryH1LC_SaveAs.set('Filename')
self.vSimulat = DoubleVar()
self.vSimulat.set(np.zeros((1, 1)))
self.LC_1 = DoubleVar()
self.LC_1.set(1.5)
self.LC_2 = DoubleVar()
self.LC_2.set(5.0)
self.H1_1 = DoubleVar()
self.H1_1.set(1.)
self.H1_2 = DoubleVar()
self.H1_2.set(4.)
self.H2value = DoubleVar()
self.H2value.set(1.)
self.grating_period = DoubleVar()
self.grating_period.set(0.83)
self.diffraction_mode = IntVar()
self.diffraction_mode.set(1)
self.Nmodes = IntVar()
self.Nmodes.set(2)
self.TraceMode_var = BooleanVar()
self.TraceMode_var.set(False)
self.TraceIntensity_var = BooleanVar()
self.TraceIntensity_var.set(True)
self.FileName = StringVar()
self.FileName.set("filename.ecc")
self.dir_label = StringVar()
self.dir_label.set(
(os.getcwd() + "/" + self.FileName.get()).replace(os.sep, '/'))
self.WorkDir = StringVar()
#for the profile
self.x_cut = DoubleVar()
self.x_cut.set(3.1)
self.y_cut = DoubleVar()
self.y_cut.set(2.3)
self.Var_var = StringVar()
self.Var_var.set("n_rib")
self.X1_var = DoubleVar()
self.X1_var.set(1.614)
self.X2_var = DoubleVar()
self.X2_var.set(1.62)
self.dX_var = DoubleVar()
self.dX_var.set(0.001)
self.addX_var = DoubleVar()
self.addX_var.set(0.0)
self.addY_var = DoubleVar()
self.addY_var.set(0.0)
self.FileName_var = StringVar()
self.FileName_var.set("Data")
self.Show_Struct_var = BooleanVar()
self.Show_Struct_var.set(False)
self.SaveFile_var = BooleanVar()
self.SaveFile_var.set(True)
self.Dn_diff_var = BooleanVar()
self.Dn_diff_var.set(False)
self.dir_label_var = StringVar()
self.dir_label_var.set(
(os.getcwd() + "/" + self.FileName_var.get()).replace(os.sep, '/'))
def create_widgets(self):
topframe = Frame(self.master)
topframe.pack()
nbook = ttk.Notebook(topframe)
f1 = ttk.Frame(nbook)
f2 = ttk.Frame(nbook)
f3 = ttk.Frame(nbook)
nbook.add(f1, text="Simulation")
nbook.add(f2, text="Mapping")
nbook.add(f3, text="Variable effect")
nbook.pack()
FrameDessous = Frame(self.master)
FrameDessous.pack(side=BOTTOM)
Button(FrameDessous, text="Close", fg='red',
command=self.close_all).pack(side=LEFT)
Button(FrameDessous,
text="Close plots",
fg='red',
command=self.close_plots).pack(side=LEFT)
#---- Tab 1 ------------- frame f1
tf1 = ttk.Frame(f1)
tf1.pack()
FrameStruct.LaFrame(tf1,\
self.nC_1,self.nC_2,self.nC_3,self.nL1_1,self.nL1_2,self.nL1_3,self.nL2_1,self.nL2_2,self.nL2_3,\
self.nSub_1,self.nSub_2,self.nSub_3,self.TL_1,self.TL_2,self.TChan).pack()
FrameLbdaORMode.LaFrame(tf1, self.WL, self.OPR, self.Nmodes,
self.TraceMode_var,
self.TraceIntensity_var).pack()
bf1 = ttk.Frame(f1)
bf1.pack(side=BOTTOM)
self.ButtonsSimulOne(bf1).pack()
#----------- tab 2 ------------ frame f2
tf2 = ttk.Frame(f2)
tf2.pack()
FrameMapping.LaFrame(tf2,\
self.H1_1, self.H1_2, self.LC_1,self.LC_2, self.H2value\
).pack(side=LEFT)
FrameFileNameXY.LaFrame(tf2,\
self.FileName, self.x_cut, self.y_cut,self.dir_label).pack(side=LEFT)
bf2 = ttk.Frame(f2)
bf2.pack(side=BOTTOM)
self.ButtonsMapping(bf2).pack()
#----------- tab 3 ------------ frame f3
tf3 = ttk.Frame(f3)
tf3.pack()
FrameVariable.LaFrame(tf3, self.Var_var, self.X1_var, self.X2_var,
self.dX_var, self.addX_var, self.addY_var,
self.dir_label_var, self.FileName_var,
self.Show_Struct_var, self.SaveFile_var,
self.Dn_diff_var).pack(side=LEFT)
bf3 = ttk.Frame(f3)
bf3.pack(side=BOTTOM)
self.ButtonsVariable(bf3).pack()
def ButtonsSimulOne(self, topframe):
frame = Frame(topframe, bd=3, pady=2)
# frame.pack()
Button(frame, text="Solve", fg='green',
command=self.Solve).pack(side=LEFT)
Button(frame,
text="Plot_indices",
fg='green',
command=self.Plot_indices).pack(side=LEFT)
return frame
def ButtonsMapping(self, topframe):
frame = Frame(topframe, bd=3, pady=2)
self.Save_as_en = Button(topframe,
text="Save As",
command=lambda: self.file_save_as())
self.Save_as_en.pack(side=LEFT)
Button(topframe, text="Simulate", fg='Green',
command=self.Simulate).pack(side=LEFT)
Button(
topframe,
text="Browse A File",
command=lambda: self.my_fileDialog(tab="Mapping")).pack(side=LEFT)
Button(topframe,
text="Plot Ecc.",
command=lambda: self.plot_simulate_ecc()).pack(side=LEFT)
Button(topframe,
text="Plot S3",
command=lambda: self.plot_simulate_ecc(What_plot='S3')).pack(
side=LEFT)
Button(topframe, text="Plot \u0394n",
command=self.plot_simulate_dn).pack(side=LEFT)
Button(topframe,
text="Plot profile_ecc",
fg='green',
command=lambda: self.plot_line_profile()).pack(side=LEFT)
Button(topframe,
text="Plot profile_S3",
fg='green',
command=lambda: self.plot_line_profile(What_plot='S3')).pack(
side=LEFT)
return frame
def ButtonsVariable(self, topframe):
frame = Frame(topframe, bd=3, pady=2)
Button(topframe, text="Simulate",
command=lambda: self.Simulate_Var()).pack(side=LEFT)
Button(
topframe,
text="Browse A File",
command=lambda: self.my_fileDialog(tab="Variable")).pack(side=LEFT)
#Button(topframe, text="Plot DnSc",command=lambda:self.plot_simulate_ecc()).pack(side=LEFT)
Button(topframe,
text="Plot TE0TM0",
fg='green',
command=lambda: self.plot_Variable(
What_plot=True, Add_point=False)).pack(side=LEFT)
#Button(topframe, text="Add", command=lambda:self.plot_Variable(What_plot=True,Add_point=True)).pack(side=LEFT)
return frame
def Plot_indices(self):
self.g = Channel(wl=self.WL.get(), pas=0.1, \
nc=self.nC_1.get(), nc_2=self.nC_2.get(), nc_3=self.nC_3.get(), Hc=0.8, \
LC=self.TChan.get(), LB=5., LB_R=5., \
n1B=self.nL1_1.get(), n1C=self.nL1_2.get(), n1D=self.nL1_3.get(), H1=self.TL_1.get(), \
n2B=self.nL2_1.get(), n2C=self.nL2_2.get(), n2D=self.nL2_3.get(), H2=self.TL_2.get(), \
nsub=self.nSub_1.get(), nsub_2=self.nSub_2.get(), nsub_3=self.nSub_3.get(), Hsub=2.,
OR=self.OPR.get())
self.g.Traceindice()
def my_fileDialog(self, tab="Mapping"): # to brows the file
if tab == "Mapping":
self.vSimulat = filedialog.askopenfilename(initialdir=os.getcwd(),\
title="Select A File",filetypes=[('ecc',"*.ecc"),('All files', '*')])
if self.vSimulat:
self.dr = np.loadtxt(self.vSimulat,
delimiter=' ',
comments='#') #self.df.to_numpy()
self.line15 = open(self.vSimulat, "r").readlines()[15]
if 'Dimentions of the graph are:' in self.line15:
X = self.line15.strip('#')
X = X.strip('Dimentions of the graph are:')
X = X.strip('\n')
self.dimentions_var = np.fromstring(X,
dtype=np.float,
sep=',')
self.LC_1.set(self.dimentions_var[0])
self.LC_2.set(self.dimentions_var[1])
self.H1_1.set(self.dimentions_var[3])
self.H1_2.set(self.dimentions_var[4])
else:
messagebox.showinfo(
"Warning",
'please check your file to see if the dimentions are in line 15'
)
else:
messagebox.showinfo("Warning", 'Please choose a file to plot')
elif tab == "Variable":
self.Browse_var=filedialog.askopenfilename(initialdir=os.getcwd(),\
title="Select A File",filetypes=[('TE0TM0',"*.TE0TM0"),('All files', '*')])
if self.Browse_var:
self.DnSc_TE0TM0 = np.loadtxt(
self.Browse_var, delimiter=' ',
comments='#') #self.df.to_numpy()
else:
messagebox.showinfo("Warning", 'Please choose a file to plot')
def file_save_as(self):
"""Ask the user where to save the file and save it there.
Returns True if the file was saved, and False if the user
cancelled the dialog.
"""
self.save_as_path = filedialog.askdirectory(
initialdir=os.getcwd(),
title="Select As") #,filetypes=("json", "*.json")
if self.save_as_path:
os.chdir(self.save_as_path)
self.dir_label.set(
(os.getcwd() + "/" + self.FileName.get()).replace(os.sep, '/'))
else:
messagebox.showinfo("Warning", 'Please try again to save the file')
def plot_line_profile(self, What_plot='ecc'):
fig, main_ax = plt.subplots(figsize=(6, 6))
divider = make_axes_locatable(main_ax)
top_ax = divider.append_axes("top", 1.05, pad=0.1, sharex=main_ax)
right_ax = divider.append_axes("right", 1.05, pad=0.1, sharey=main_ax)
self.curX = self.x_cut.get(
) # position of the vertical line They should be always a float with one decimal like 1.1 or 1.2 etc...
self.curY = self.y_cut.get() # position of the horizontal line
self.w_array = np.arange(
self.LC_1.get(), self.LC_2.get(), 0.1
) # introduce the x axis scale (xmin,xmax,step) we should know all these three parameters from the file we introduce in the next step
self.h_array = np.arange(
self.H1_1.get(), self.H1_2.get(),
0.1) # introduce the y axis scale (ymin,ymax,step)
self.DnCB = ((0.001 * (float(self.WL.get())) * float(self.OPR.get())) /
180)
ecc = (self.DnCB / (self.dr + np.sqrt(self.DnCB**2 + self.dr**2))
) # define eccentricity matrix
# make some labels invisible
top_ax.xaxis.set_tick_params(labelbottom=False)
right_ax.yaxis.set_tick_params(labelleft=False)
main_ax.set_xlabel('W (\u03BCm)')
main_ax.set_ylabel('H (\u03BCm)')
top_ax.set_ylabel(r'E$_{cc}$')
right_ax.set_xlabel(r'E$_{cc}$')
z_max = 1 # z.max()
self.curX = np.around(float(self.curX), 2)
self.curY = np.around(float(self.curY), 2)
if What_plot == 'S3':
ecc = np.sin(2 * np.arctan(
(np.real(ecc))**-1)) # this line is to plot S3
im = main_ax.imshow(ecc,
cmap="nipy_spectral",
extent=[
self.LC_1.get(),
self.LC_2.get(),
self.H1_1.get(),
self.H1_2.get()
],
origin='lower')
main_ax.autoscale(enable=False)
right_ax.autoscale(enable=False)
top_ax.autoscale(enable=False)
right_ax.set_xlim(right=z_max)
top_ax.set_ylim(top=z_max)
self.v_line = main_ax.axvline(self.curX, color='b')
self.h_line = main_ax.axhline(self.curY, color='g')
self.v_prof, = right_ax.plot(
ecc[:, (np.argmax(
np.where(
np.around(self.w_array, 2) == self.curX, self.w_array, 0))
)], self.h_array, 'b-'
) # (np.argmax(np.where(np.around(self.h_array,2)==self.curY,self.h_array,0)))
self.h_prof, = top_ax.plot(
self.w_array, ecc[(np.argmax(
np.where(
np.around(self.h_array, 2) == self.curY, self.h_array, 0))
), :], 'g-'
) # (np.argmax(np.where(np.around(self.w_array,2)==self.curX,self.w_array,0)))
if What_plot == 'S3':
cax = divider.new_vertical(size="5%",
pad=0.4,
title="Stokes parameter S3")
else:
cax = divider.new_vertical(size="5%",
pad=0.4,
title="Eccentricity")
fig.add_axes(cax)
fig.colorbar(im, cax=cax, orientation="horizontal")
cax.set_xlim(0, 1)
cax.set
# plt.savefig('colorbar_positioning_03.png', format='png', bbox_inches='tight')##################
plt.show()
def plot_simulate_ecc(self, What_plot='ecc'):
if self.vSimulat:
fig, self.ax = plt.subplots(figsize=(8, 6))
#plt.title("Eccentricy as a function of channel dimensions")
print("Optcal rotaion is: " + str(self.OPR.get()))
self.DnCB = ((0.001 *
(float(self.WL.get())) * float(self.OPR.get())) /
180)
print("Circular bireferengence (CB) is: " + str(self.DnCB))
ecc = self.DnCB / (self.dr + np.sqrt(self.DnCB**2 + self.dr**2))
if What_plot == 'S3':
ecc = np.sin(2 * np.arctan(
(np.real(ecc))**-1)) # this line is to plot S3
im = plt.imshow(ecc,
cmap="nipy_spectral",
extent=[
self.LC_1.get(),
self.LC_2.get(),
self.H1_1.get(),
self.H1_2.get()
],
origin='lower')
plt.xlabel('W (\u03BCm)')
plt.ylabel('H (\u03BCm)')
divider = make_axes_locatable(self.ax)
if What_plot == 'S3':
cax = divider.new_vertical(size="5%",
pad=0.4,
title="Stokes parameter S3")
else:
cax = divider.new_vertical(size="5%",
pad=0.4,
title="Eccentricity")
fig.add_axes(cax)
fig.colorbar(im, cax=cax, orientation="horizontal")
###################################################################################################### mshu x y labela wash karw
# plt.savefig('colorbar_positioning_03.png', format='png', bbox_inches='tight')
cid = fig.canvas.mpl_connect('button_press_event', self.onclick)
plt.show()
plt.close()
else:
messagebox.showinfo("Warning", 'Please choose a file to plot')
def plot_simulate_dn(self):
if self.vSimulat:
fig, self.ax = plt.subplots(figsize=(8, 6))
#plt.title("Modal bireferengence as a function of channel dimensions")
im = plt.imshow(self.dr,cmap="nipy_spectral",norm=colors.LogNorm(vmin=self.dr.min(),\
vmax=10*self.dr.max()),extent=[self.LC_1.get(), self.LC_2.get(), self.H1_1.get()\
,self.H1_2.get()], origin='lower')
plt.xlabel('W (\u03BCm)')
plt.ylabel('H (\u03BCm)')
divider = make_axes_locatable(self.ax)
cax = divider.new_vertical(size="5%",
pad=0.4,
title="Modal bireferengence")
fig.add_axes(cax)
fig.colorbar(im, cax=cax, orientation="horizontal")
# plt.savefig('colorbar_positioning_03.png', format='png', bbox_inches='tight')
cid = fig.canvas.mpl_connect('button_press_event', self.onclick)
plt.show()
plt.close()
else:
messagebox.showinfo("Warning", 'Please choose a file to plot')
def plot_Variable(self,
to_Plot="TE0TM0",
What_plot="DnSc_plot",
Add_point=True):
if self.DnSc_TE0TM0 is not None and to_Plot == "TE0TM0":
if self.Dn_diff_var.get() is True:
plt.plot(self.DnSc_TE0TM0.T[5],
self.DnSc_TE0TM0.T[1],
label="TE0")
plt.plot(self.DnSc_TE0TM0.T[5],
self.DnSc_TE0TM0.T[2],
label="TM0")
plt.xlabel(self.Var_var.get() + "_difference")
else:
plt.plot(self.DnSc_TE0TM0.T[0],
self.DnSc_TE0TM0.T[1],
label="TE0")
plt.plot(self.DnSc_TE0TM0.T[0],
self.DnSc_TE0TM0.T[2],
label="TM0")
plt.xlabel(self.Var_var.get())
plt.ylabel('TE0 & TM0 n_eff')
plt.title("TE0 & TM0 dispersion curves")
plt.legend()
if What_plot:
fig, (ax_top, ax_bottom) = plt.subplots(nrows=2,
ncols=1,
sharex=True,
figsize=(12, 6))
fig.suptitle(
"Modal bireferengence evolution Vs Channel refractive index"
)
ax_top.set_ylabel("nTE - nTM (Δn)", fontsize=12,
color='k') #(r"10$^{-5}$ X Δn")
ax_bottom.set_ylabel(r"S$_3$", fontsize=12, color='k')
ax_bottom.set_xlabel("Channel refractive index",
fontsize=12,
color='k')
ax_top.grid(True)
ax_bottom.grid(True)
CB = ((0.001 * (self.WL.get()) * self.OPR.get()) / 180)
ax_top.plot(self.DnSc_TE0TM0.T[0], self.DnSc_TE0TM0.T[3])
ax_bottom.plot(self.DnSc_TE0TM0.T[0],
np.sin(np.arctan(CB / self.DnSc_TE0TM0.T[3])))
#plt.xlabel(self.Var_var.get())
plt.show()
#elif What_plot and Add_point:
# plt.scatter(self.addX_var.get(),self.addY_var.get())
else:
messagebox.showinfo("Warning", 'Please choose a file to plot')
def onclick(self, event):
print('button=%d, x=%d, y=%d, xdata=%f, ydata=%f' %
(event.button, event.x, event.y, event.xdata, event.ydata))
self.ax.plot(event.xdata, event.ydata, 'k+', markersize=15)
plt.show()
def close_all(self):
# Button(self.root,text = 'Click Me', command=lambda:[self.funcA(), self.funcB(), self.funcC()])
self.master.destroy()
plt.close('all')
def Simulate_Var(self):
self.g = Channel(wl=self.WL.get(), pas=0.1, \
nc=self.nC_1.get(), nc_2=self.nC_2.get(), nc_3=self.nC_3.get(), Hc=0.8, \
LC=self.TChan.get(), LB=5., LB_R=5., \
n1B=self.nL1_1.get(), n1C=self.nL1_2.get(), n1D=self.nL1_3.get(), H1=self.TL_1.get(), \
n2B=self.nL2_1.get(), n2C=self.nL2_2.get(), n2D=self.nL2_3.get(), H2=self.TL_2.get(), \
nsub=self.nSub_1.get(), nsub_2=self.nSub_2.get(), nsub_3=self.nSub_3.get(), Hsub=2.,
OR=self.OPR.get())
self.g.VariaX(X0=self.X1_var.get(),X1=self.X2_var.get(),dX=self.dX_var.get(),variable=self.Var_var.get()\
,trace=True,Show_Struct=self.Show_Struct_var.get(),SaveFile=self.SaveFile_var.get(),fich=self.FileName_var.get())
def Solve(self):
self.g = Channel(wl=self.WL.get(), pas=0.1, \
nc=self.nC_1.get(), nc_2=self.nC_2.get(), nc_3=self.nC_3.get(), Hc=0.8, \
LC=self.TChan.get(), LB=5., LB_R=5., \
n1B=self.nL1_1.get(), n1C=self.nL1_2.get(), n1D=self.nL1_3.get(), H1=self.TL_1.get(), \
n2B=self.nL2_1.get(), n2C=self.nL2_2.get(), n2D=self.nL2_3.get(), H2=self.TL_2.get(), \
nsub=self.nSub_1.get(), nsub_2=self.nSub_2.get(), nsub_3=self.nSub_3.get(), Hsub=2.,
OR=self.OPR.get())
self.g.Calcule(Nmodes=self.Nmodes.get(),
trace=self.TraceIntensity_var.get(),
traceMode=self.TraceMode_var.get())
plt.show()
def NumOf_guided_modes(
self): # This will print angles which can give coupled light.
print(
"Coupling neff is calculated with equation\n n_eff=n_top.sin(\u03B8) + (m.(\u03BB/\u039B) \n where "
"n_eff is effective refractive index, n_top is refractive index of the cover\n"
"\u03B8 is coupling angle,m is diffraction mode, \u03BB is wavelength, and \u039B is grating period"
)
self.g = Channel(wl=self.WL.get(), pas=0.1, \
nc=self.nC_1.get(), nc_2=self.nC_2.get(), nc_3=self.nC_3.get(), Hc=0.8, \
LC=self.TChan.get(), LB=5., LB_R=5., \
n1B=self.nL1_1.get(), n1C=self.nL1_2.get(), n1D=self.nL1_3.get(), H1=self.TL_1.get(), \
n2B=self.nL2_1.get(), n2C=self.nL2_2.get(), n2D=self.nL2_3.get(), H2=self.TL_2.get(), \
nsub=self.nSub_1.get(), nsub_2=self.nSub_2.get(), nsub_3=self.nSub_3.get(), Hsub=2.,
OR=self.OPR.get())
if self.g.NmaxPlan(
) == 0: # blow H2==0.9 NmaxPlan is 0 and it does not give good value.
messagebox.showinfo(
"Hey",
'It looks like NmaxPlan is {}'.format(self.g.NmaxPlan()))
pass
else:
for i in np.real(
(self.g.NumOf_guidedModes(Nmodes=self.Nmodes.get())[1:])):
print(
"For the {:.4f} mode there is one coupling angle at {:.4f}"
.format(i, self.Nmode_effective(i)))
def Nmode_effective(
self, n_eff
): # to find n_e that is effective refractive index of the grating
'''This method returns guided modes of the structure (not leaky modes)'''
#print(self.grating_period,self.diffraction_mode)
n_top = np.average(
np.array([self.nC_1.get(),
self.nC_2.get(),
self.nC_3.get()]))
m = self.diffraction_mode.get()
WL = self.WL.get()
GP = self.grating_period.get()
TheSin = (n_eff - m * WL / GP) / n_top
if np.abs(TheSin) > 1:
theta = 0
else:
theta = np.rad2deg(np.arcsin(TheSin))
return theta
def Simulate(self):
if messagebox.askyesno(
"Warning! ",
'This may take several minutes\n Are you sure you want to continue?'
):
messagebox.showinfo(
"Simulation",
'You can see the see the remaining time in the run window')
self.g = Channel(wl=self.WL.get(), pas=0.1, \
nc=self.nC_1.get(), nc_2=self.nC_2.get(), nc_3=self.nC_3.get(), Hc=0.8, \
LC=self.TChan.get(), LB=5., LB_R=5., \
n1B=self.nL1_1.get(), n1C=self.nL1_2.get(), n1D=self.nL1_3.get(), H1=self.TL_1.get(), \
n2B=self.nL2_1.get(), n2C=self.nL2_2.get(), n2D=self.nL2_3.get(), H2=self.TL_2.get(), \
nsub=self.nSub_1.get(), nsub_2=self.nSub_2.get(), nsub_3=self.nSub_3.get(), Hsub=2.,
OR=self.OPR.get())
self.g.H2 = self.H2value.get()
self.g.VariaXY(X0=self.LC_1.get(),
X1=self.LC_2.get(),
dX=0.1,
Y0=self.H1_1.get(),
Y1=self.H1_2.get(),
dY=0.1,
fich=self.FileName.get())
else:
messagebox.showinfo(
"Canceled", 'You have successfully canceled the simulation')
def close_plots(self):
plt.close('all')