class SoftcamPanel(ConfigListScreen, Screen):
def __init__(self, session):
global emuDir
emuDir = "/etc/"
self.service = None
Screen.__init__(self, session)
self.skin = SOFTCAM_SKIN
self.onShown.append(self.setWindowTitle)
self.partyfeed = None
self.YellowAction = REFRESH
self.mlist = []
self["key_green"] = Label(_("Restart"))
self["key_red"] = Label(_("Stop"))
self["key_yellow"] = Label(_("Refresh"))
self.partyfeed = os.path.exists("/etc/opkg/3rdparty-feed.conf") or os.path.exists("/etc/opkg/3rd-party-feed.conf")
if self.partyfeed:
self["key_blue"]= Label(_("Install"))
else:
self["key_blue"]= Label(_("Exit"))
self["ecminfo"] = Label(_("No ECM info"))
self["actifcam"] = Label(_("no CAM 1 active"))
self["actifcam2"] = Label(_("no CAM 2 active"))
#// create listings
self.emuDirlist = []
self.emuList = []
self.emuBin = []
self.emuStart = []
self.emuStop = []
self.emuRgui = []
self.emuDirlist = os.listdir(emuDir)
self.ecmtel = 0
self.first = 0
global count
count = 0
#// check emu dir for config files
print "************ go in the emuloop ************"
for x in self.emuDirlist:
#// if file contains the string "emu" (then this is a emu config file)
if x.find("emu") > -1:
self.emuList.append(emuDir + x)
em = open(emuDir + x)
self.emuRgui.append(0)
#// read the emu config file
for line in em.readlines():
line1 = line
#// startcam
line = line1
if line.find("startcam") > -1:
line = line.split("=")
self.emuStart.append(line[1].strip())
#// stopcam
line = line1
if line.find("stopcam") > -1:
line = line.split("=")
self.emuStop.append(line[1].strip())
#// Restart GUI
line = line1
if line.find("restartgui") > -1:
self.emuRgui[count] = 1
#// binname
line = line1
if line.find("binname") > -1:
line = line.split("=")
self.emuBin.append(line[1].strip())
em.close()
count += 1
self.maxcount = count
self.onChangedEntry = [ ]
self.list = []
ConfigListScreen.__init__(self, self.list, session = self.session, on_change = self.changedEntry)
self.ReadMenu()
self.createSetup()
self["ecminfo"].show()
self.read_shareinfo()
self.Timer = eTimer()
self.Timer.callback.append(self.layoutFinished)
self.Timer.start(2000, True)
#// get the remote buttons
self["actions"] = ActionMap(["OkCancelActions", "DirectionActions", "ColorActions"],
{
"cancel": self.Exit,
"ok": self.ok,
"blue": self.Blue,
"red": self.Red,
"green": self.Green,
"yellow": self.Yellow,
}, -1)
#// update screen
self.onLayoutFinish.append(self.layoutFinished)
def setWindowTitle(self):
self.setTitle(_("Softcam Panel V2.0"))
def ReadMenu(self):
self.whichCam()
for x in self.emuDirlist:
#// if file contains the string "emu" (then this is a emu config file)
if x.find("emu") > -1:
self.emuList.append(emuDir + x)
em = open(emuDir + x)
self.emuRgui.append(0)
#// read the emu config file
for line in em.readlines():
line1 = line
#// emuname
line = line1
if line.find("emuname") > -1:
line = line.split("=")
self.mlist.append(line[1].strip())
name = line[1].strip()
em.close()
emusel = [_('no cam')]
for x in self.mlist:
emusel.append(x)
self.cam1sel = ConfigSelection(emusel)
self.cam2sel = ConfigSelection(emusel)
self.setYellowKey(self.curcam)
def whichCam(self):
#// check for active cam 1
cam = config.softcam.actCam.getValue()
self.curcam = None
self.curcamIndex = None
if cam in self.mlist:
index = self.mlist.index(cam)
x = self.emuBin[index]
if self.isCamrunning(x):
self.curcam = x
self.curcamIndex = index
#// check for active cam 2
cam = config.softcam.actCam2.getValue()
self.curcam2 = None
self.curcam2Index = None
if cam in self.mlist:
index = self.mlist.index(cam)
x = self.emuBin[index]
if self.isCamrunning(x):
self.curcam2 = x
self.curcam2Index = index
if not self.curcam and not self.curcam2 and self.mlist:
print "[SOFTCAMPANEL] try to find a running cam"
for cam in self.emuBin:
index = self.emuBin.index(cam)
if self.isCamrunning(cam):
self.curcam = cam
self.curcamIndex = index
camname = self.mlist[index]
print"[SOFTCAMPANEL] found %s running" % camname
self.Save_Settings(camname)
break
def createSetup(self):
self.editListEntry = None
self.list = []
self.list.append(getConfigListEntry(_("Select Cam 1"), self.cam1sel))
if len(self.emuStart) > 1:
self["actifcam2"].show()
if self.cam1sel.getValue() != _('no cam') or config.softcam.actCam.getValue() != _("no CAM 1 active"):
self.list.append(getConfigListEntry(_("Select Cam 2"), self.cam2sel))
if self.cam2sel.getValue() != _('no cam'):
self.list.append(getConfigListEntry(_("Wait time before start Cam 2"), config.softcam.waittime))
else:
self["actifcam2"].hide()
self.cam2sel.setValue(_('no cam'))
self["config"].list = self.list
self["config"].setList(self.list)
def setYellowKey(self, cam):
if cam == None or cam == _('no cam'):
self.YellowAction = REFRESH
self["key_yellow"].setText(_("Refresh"))
return
if cam.upper().startswith('CCCAM'):
self.YellowAction = CCCAMINFO
self["key_yellow"].setText(_("CCcamInfo"))
elif cam.upper().startswith('OSCAM'):
self.YellowAction = OSCAMINFO
self["key_yellow"].setText(_("OscamInfo"))
else:
self.YellowAction = REFRESH
self["key_yellow"].setText(_("Refresh"))
def selectionChanged(self):
#self["status"].setText(self["config"].getCurrent()[0])
pass
def changedEntry(self):
for x in self.onChangedEntry:
x()
self.selectionChanged()
self.createSetup()
def getCurrentEntry(self):
return self["config"].getCurrent()[0]
def getCurrentValue(self):
return str(self["config"].getCurrent()[1].getText())
def getCurrentDescription(self):
return self["config"].getCurrent() and len(self["config"].getCurrent()) > 2 and self["config"].getCurrent()[2] or ""
def layoutFinished(self):
self.Timer.stop()
if not Check_Softcam():
self.Exit()
#// check for active cam
try:
self.whichCam()
global oldcamIndex, oldcam2Index
oldcamIndex = -1
oldcam2Index = -1
tel = 0
if self.curcam:
oldcamIndex = self.curcamIndex
actcam = self.mlist[oldcamIndex]
if self.first == 0:
self.cam1sel.setValue(actcam)
self["key_green"].setText(_("Restart"))
self["actifcam"].setText(_("active CAM 1: ") + actcam )
print '[SOFTCAM] set active cam 1 to: ' + actcam
else:
actcam = _("no CAM 1 active")
self["actifcam"].setText(actcam)
if self.curcam2:
oldcam2Index = self.curcam2Index
actcam = self.mlist[oldcam2Index]
if self.first == 0:
self.cam2sel.setValue(actcam)
self["actifcam2"].setText(_("active CAM 2: ") + actcam )
print '[SOFTCAM] set active cam 2 to: ' + actcam
else:
actcam2 = _("no CAM 2 active")
self["actifcam2"].setText(actcam2)
if self.first == 0: # Only update first time or when refresh button was pressed
self.createSetup()
self.first = 1
#// CAM IS NOT RUNNING
if not self.curcam and not self.curcam2:
self["key_green"].setText(_("Start"))
self.YellowAction = REFRESH
self["key_yellow"].setText(_("Refresh"))
if os.path.exists('/tmp/ecm.info') is True:
os.system("rm /tmp/ecm.info")
if os.path.exists('/tmp/ecm0.info') is True:
os.system("rm /tmp/ecm0.info")
except:
pass
if self["config"].getCurrent()[0] == _("Select Cam 1"):
self.setYellowKey(self.curcam)
else:
self.setYellowKey(self.curcam2)
#// read ecm.info
ecmi = ""
if os.path.exists('/tmp/ecm.info') is True:
ecmi = self.read_ecm('/tmp/ecm.info')
elif os.path.exists('/tmp/ecm1.info') is True:
ecmi = self.read_ecm('/tmp/ecm1.info')
else:
ecmi = _("No ECM info")
ecmold = self["ecminfo"].getText()
if ecmold == ecmi:
self.ecmtel += 1
if self.ecmtel > 5:
ecmi = _("No new ECM info")
else:
self.ecmtel = 0
self["ecminfo"].setText(ecmi)
self.Timer.start(2000, True) #reset timer
def read_shareinfo(self):
#// read share.info and put in list
self.shareinfo =[]
if os.path.exists('/tmp/share.info') is True:
s = open('/tmp/share.info')
for x in s.readlines():
self.shareinfo.append(x)
s.close()
def read_ecm(self, ecmpath):
#// read ecm.info and check for share.info
ecmi2 = ''
Caid = ''
Prov = ''
f = open(ecmpath)
for line in f.readlines():
line= line.replace('=', '')
line= line.replace(' ', '', 1)
#// search CaID
if line.find('ECM on CaID') > -1:
k = line.find('ECM on CaID') + 14
Caid = line[k:k+4]
#// search Boxid
if line.find('prov:') > -1:
tmpprov = line.split(':')
Prov = tmpprov[1].strip()
#// search peer in share.info only if share.info exists
if Caid <> '' and Prov <> '' and len(self.shareinfo) > 0 :
for x in self.shareinfo:
cel = x.split(' ')
#// search Boxid and Caid
if cel[5][0:4] == Caid and cel[9][3:7] == Prov:
line = 'Peer: ' + Prov + ' - ' + cel[3] + ' - ' + cel[8] + '\n'
break
ecmi2 = ecmi2 + line
f.close()
return ecmi2
def Red(self):
#// Stopping the CAM when pressing the RED button
self.Timer.stop()
self.Stopcam()
self.Timer.start(2000, True) #reset timer
def Yellow(self):
if self.YellowAction == CCCAMINFO:
self.Timer.stop()
self.session.openWithCallback(self.ShowSoftcamCallback, CCcamInfoMain)
elif self.YellowAction == OSCAMINFO:
self.Timer.stop()
self.session.openWithCallback(self.ShowSoftcamCallback, OscamInfoMenu)
else:
self.first = 0
self.layoutFinished()
def Green(self):
#// Start the CAM when pressing the GREEN button
self.Timer.stop()
self.Startcam()
self.Timer.start(2000, True) #reset timer
def Exit(self):
self.Timer.stop()
self.close()
def Blue(self):
if not self.partyfeed:
self.Exit()
else:
self.Timer.stop()
self.session.openWithCallback(self.ShowSoftcamCallback, ShowSoftcamPackages)
def ShowSoftcamCallback(self):
self.Timer.start(2000, True)
def ok(self):
#// Exit Softcam when pressing the OK button
self.Timer.stop()
self.Startcam()
if self.YellowAction == REFRESH:
self.Yellow()
self.Timer.start(2000, True) #reset timer
def Stopcam(self):
#// Stopping the CAM
global oldcamIndex, oldcam2Index
if oldcamIndex >= 0:
oldcam = self.emuBin[oldcamIndex]
else:
oldcam = None
if oldcam2Index >= 0:
oldcam2 = self.emuBin[oldcam2Index]
else:
oldcam2 = None
import time
self.container = eConsoleAppContainer()
if config.softcam.camstartMode.getValue() == "0" or not fileExists('/etc/init.d/softcam'):
if oldcam:
print '[SOFTCAM] Python stop cam 1: ' + oldcam
self.container.execute(self.emuStop[oldcamIndex])
time.sleep(1) # was 5sec
t = 0
while t < 5:
p = command('pidof %s |wc -w' % oldcam )
if not p.isdigit(): p=0
if int(p) > 0:
self.container = eConsoleAppContainer()
self.container.execute('killall -9 ' + oldcam)
t += 1
time.sleep(1)
else:
t = 5
if oldcam2:
print '[SOFTCAM] Python stop cam 2: ' + oldcam2
self.container.execute(self.emuStop[oldcam2Index])
time.sleep(1) # was 5sec
t = 0
while t < 5:
p = command('pidof %s |wc -w' % oldcam2 )
if not p.isdigit(): p=0
if int(p) > 0:
self.container = eConsoleAppContainer()
self.container.execute('killall -9 ' + oldcam2)
t += 1
time.sleep(1)
else:
t = 5
else:
self.container.execute('/etc/init.d/softcam.cam1 stop')
self.container.execute('/etc/init.d/softcam.cam2 stop')
if os.path.exists('/tmp/ecm.info') is True:
os.system("rm /tmp/ecm.info")
actcam = _("no CAM 1 active")
actcam2 = _("no CAM 2 active")
self["actifcam"].setText(actcam)
self["actifcam2"].setText(actcam2)
self["key_green"].setText(_("Start"))
self["ecminfo"].setText(_("No ECM info"))
self.Save_Settings(actcam)
self.Save_Settings2(actcam2)
def Startcam(self):
#// Starting the CAM
try:
if count > 0:
if self.cam1sel.getValue() == self.cam2sel.getValue():
self.session.openWithCallback(self.doNothing, MessageBox, _("No Cam started !!\n\nCam 1 must be different from Cam 2"), MessageBox.TYPE_ERROR, simple=True)
return
if config.softcam.camstartMode.getValue() == "0":
self.Stopcam()
self.camIndex = self.cam1sel.getIndex() -1
self.cam2Index = self.cam2sel.getIndex() - 1
if self.camIndex >= 0:
actcam = self.cam1sel.getValue()
self["actifcam"].setText(_("active CAM 1: ") + actcam)
self.Save_Settings(actcam)
start = self.emuStart[self.camIndex]
if self.checkBinName(self.emuBin[self.camIndex], start):
self.session.openWithCallback(self.startcam2, MessageBox, actcam + _(" Not Started !!\n\nCam binname must be in the start command line\nCheck your emu config file"), MessageBox.TYPE_ERROR, simple=True)
return
if config.softcam.camstartMode.getValue() == "0":
print '[SOFTCAM] Python start cam 1: ' + actcam
self.session.openWithCallback(self.waitTime, MessageBox, _("Starting Cam 1: ") + actcam, MessageBox.TYPE_WARNING, timeout=5, simple=True)
self.container = eConsoleAppContainer()
self.container.execute(start)
else:
# Create INIT.D start
self.session.openWithCallback(self.doNothing, MessageBox, _("Creating start scripts and starting the cam"), MessageBox.TYPE_WARNING, timeout=10, simple=True)
self.Save_Settings2(self.cam2sel.getValue())
camname1 = self.emuBin[self.camIndex]
camname2 = self.emuBin[self.cam2Index]
self.deleteInit()
camname = "/usr/bin/" + camname1
startcmd = self.emuStart[self.camIndex]
stopcmd = self.emuStop[self.camIndex]
self.createInitdscript("cam1", camname, startcmd, stopcmd)
if self.cam2Index >= 0:
camname = "/usr/bin/" + camname2
startcmd = self.emuStart[self.cam2Index]
stopcmd = self.emuStop[self.cam2Index]
self.createInitdscript("cam2", camname, startcmd, stopcmd, config.softcam.waittime.getValue())
self["key_green"].setText(_("Restart"))
except:
pass
def waitTime(self, ret):
if self.cam2Index >= 0:
if config.softcam.waittime.getValue() == '0':
self.startcam2(None)
else:
self.session.openWithCallback(self.startcam2, MessageBox, _("Waiting..."), MessageBox.TYPE_WARNING, timeout=int(config.softcam.waittime.getValue()), simple=True)
def doNothing(self, ret):
pass
def startcam2(self, ret):
camIndex = self.cam2Index
if camIndex >= 0:
actcam = self.cam2sel.getValue()
self["actifcam2"].setText(_("active CAM 2: ") + actcam)
self.Save_Settings2(actcam)
start = self.emuStart[camIndex]
if self.checkBinName(self.emuBin[self.cam2Index], start):
self.session.open(MessageBox, actcam + _(" Not Started !!\n\nCam binname must be in the start command line\nCheck your emu config file"), MessageBox.TYPE_ERROR, simple=True)
return
print '[SOFTCAM] Python start cam 2: ' + actcam
self.session.open(MessageBox, _("Starting Cam 2: ") + actcam, MessageBox.TYPE_WARNING, timeout=5, simple=True)
self.container = eConsoleAppContainer()
self.container.execute(start)
def Save_Settings(self, cam_name):
#// Save Came Name to Settings file
config.softcam.actCam.setValue(cam_name)
config.softcam.save()
configfile.save()
def Save_Settings2(self, cam_name):
#// Save Came Name to Settings file
config.softcam.actCam2.setValue(cam_name)
config.softcam.save()
configfile.save()
def isCamrunning(self, cam):
p = command('pidof ' + cam + ' |wc -w')
if not p.isdigit(): p=0
if int(p) > 0:
return True
else:
return False
def checkBinName(self, binname, start):
print "[CHECKBINNAME] bin=%s ,start=%s" %(binname,start)
if start.find(binname + ' ') > -1:
print "[CHECKBINNAME] OK"
return False
else:
if start[start.rfind('/')+1:] == binname:
print "[CHECKBINNAME] OK"
return False
else:
print "[CHECKBINNAME] ERROR"
return True
def createInitdscript(self, camname, emubin, start, stop, wait=None):
Adir = "/etc/init.d/softcam." + camname
softcamfile = []
softcamfile.append('#!/bin/sh')
softcamfile.append('DAEMON=%s' % emubin)
softcamfile.append('STARTCAM="%s"' % start)
softcamfile.append('STOPCAM="%s"' % stop)
softcamfile.append('DESC="Softcam"')
softcamfile.append('')
softcamfile.append('test -f $DAEMON || exit 0')
softcamfile.append('set -e')
softcamfile.append('')
softcamfile.append('case "$1" in')
softcamfile.append(' start)')
softcamfile.append(' echo -n "starting $DESC: $DAEMON... "')
if wait:
softcamfile.append(' sleep ' + wait)
softcamfile.append(' $STARTCAM')
softcamfile.append(' echo "done."')
softcamfile.append(' ;;')
softcamfile.append(' stop)')
softcamfile.append(' echo -n "stopping $DESC: $DAEMON... "')
softcamfile.append(' $STOPCAM')
softcamfile.append(' echo "done."')
softcamfile.append(' ;;')
softcamfile.append(' restart)')
softcamfile.append(' echo "restarting $DESC: $DAEMON... "')
softcamfile.append(' $0 stop')
softcamfile.append(' echo "wait..."')
softcamfile.append(' sleep 5')
softcamfile.append(' $0 start')
softcamfile.append(' echo "done."')
softcamfile.append(' ;;')
softcamfile.append(' *)')
softcamfile.append(' echo "Usage: $0 {start|stop|restart}"')
softcamfile.append(' exit 1')
softcamfile.append(' ;;')
softcamfile.append('esac')
softcamfile.append('')
softcamfile.append('exit 0')
f = open( Adir, "w" )
for x in softcamfile:
f.writelines(x + '\n')
f.close()
self.container = eConsoleAppContainer()
# Set execute rights
os.chmod(Adir,0755)
# Create symbolic link for startup
if not os.path.exists("/etc/rc2.d/S20softcam." + camname):
self.container.execute('update-rc.d -f softcam.' + camname + ' defaults')
# Wait a few seconds
import time
time.sleep (3)
# Start cam
if self.isCamrunning(emubin):
self.container.execute('/etc/init.d/softcam.' + camname + ' restart')
else:
self.container.execute('/etc/init.d/softcam.' + camname + ' start')
def deleteInit(self):
if os.path.exists("/etc/rc2.d/S20softcam.cam1"):
print "Delete Symbolink link"
self.container = eConsoleAppContainer()
self.container.execute('update-rc.d -f softcam.cam1 defaults')
if os.path.exists("/etc/init.d/softcam.cam1"):
print "Delete softcam init script cam1"
os.system("rm /etc/init.d/softcam.cam1")
if os.path.exists("/etc/rc2.d/S20softcam.cam2"):
print "Delete Symbolink link"
self.container = eConsoleAppContainer()
self.container.execute('update-rc.d -f softcam.cam2 defaults')
if os.path.exists("/etc/init.d/softcam.cam2"):
print "Delete softcam init script cam2"
os.system("rm /etc/init.d/softcam.cam2")
class SoftcamPanel(ConfigListScreen, Screen):
def __init__(self, session):
global count
global emuDir
emuDir = '/etc/'
self.service = None
Screen.__init__(self, session)
self.skin = SOFTCAM_SKIN
self.onShown.append(self.setWindowTitle)
self.partyfeed = None
self.YellowAction = REFRESH
self.mlist = []
self['key_green'] = Label(_('ReStart'))
self['key_red'] = Label(_('Stop'))
self['key_yellow'] = Label(_('Refresh'))
self.partyfeed = os.path.exists(
'/etc/opkg/3rdparty-feed.conf') or os.path.exists(
'/etc/opkg/3rd-party-feed.conf')
if self.partyfeed:
self['key_blue'] = Label(_('Install'))
else:
self['key_blue'] = Label(_('Exit'))
self['ecminfo'] = Label(_('No ECM info'))
self['actifcam'] = Label(_('no CAM 1 active'))
self['actifcam2'] = Label(_('no CAM 2 active'))
self.emuDirlist = []
self.emuList = []
self.emuBin = []
self.emuStart = []
self.emuStop = []
self.emuRgui = []
self.emuDirlist = os.listdir(emuDir)
self.ecmtel = 0
self.first = 0
count = 0
print '************ go in the emuloop ************'
for x in self.emuDirlist:
if x.find('emu') > -1:
self.emuList.append(emuDir + x)
em = open(emuDir + x)
self.emuRgui.append(0)
for line in em.readlines():
line1 = line
line = line1
if line.find('startcam') > -1:
line = line.split('=')
self.emuStart.append(line[1].strip())
line = line1
if line.find('stopcam') > -1:
line = line.split('=')
self.emuStop.append(line[1].strip())
line = line1
if line.find('restartgui') > -1:
self.emuRgui[count] = 1
line = line1
if line.find('binname') > -1:
line = line.split('=')
self.emuBin.append(line[1].strip())
em.close()
count += 1
self.maxcount = count
self.onChangedEntry = []
self.list = []
ConfigListScreen.__init__(self,
self.list,
session=self.session,
on_change=self.changedEntry)
self.ReadMenu()
self.createSetup()
self['ecminfo'].show()
self.read_shareinfo()
self.Timer = eTimer()
self.Timer.callback.append(self.layoutFinished)
self.Timer.start(2000, True)
self['actions'] = ActionMap(
['OkCancelActions', 'DirectionActions', 'ColorActions'], {
'cancel': self.Exit,
'ok': self.ok,
'blue': self.Blue,
'red': self.Red,
'green': self.Green,
'yellow': self.Yellow
}, -1)
self.onLayoutFinish.append(self.layoutFinished)
return
def setWindowTitle(self):
self.setTitle(_('Softcam Panel V2.0'))
def ReadMenu(self):
self.whichCam()
for x in self.emuDirlist:
if x.find('emu') > -1:
self.emuList.append(emuDir + x)
em = open(emuDir + x)
self.emuRgui.append(0)
for line in em.readlines():
line1 = line
line = line1
if line.find('emuname') > -1:
line = line.split('=')
self.mlist.append(line[1].strip())
name = line[1].strip()
em.close()
emusel = [_('no cam')]
for x in self.mlist:
emusel.append(x)
self.cam1sel = ConfigSelection(emusel)
self.cam2sel = ConfigSelection(emusel)
self.setYellowKey(self.curcam)
def whichCam(self):
cam = config.softcam.actCam.value
self.curcam = None
self.curcamIndex = None
if cam in self.mlist:
index = self.mlist.index(cam)
x = self.emuBin[index]
if self.isCamrunning(x):
self.curcam = x
self.curcamIndex = index
cam = config.softcam.actCam2.value
self.curcam2 = None
self.curcam2Index = None
if cam in self.mlist:
index = self.mlist.index(cam)
x = self.emuBin[index]
if self.isCamrunning(x):
self.curcam2 = x
self.curcam2Index = index
if not self.curcam and not self.curcam2 and self.mlist:
print '[SOFTCAMPANEL] try to find a running cam'
for cam in self.emuBin:
index = self.emuBin.index(cam)
if self.isCamrunning(cam):
self.curcam = cam
self.curcamIndex = index
camname = self.mlist[index]
print '[SOFTCAMPANEL] found %s running' % camname
self.Save_Settings(camname)
break
return
def createSetup(self):
self.editListEntry = None
self.list = []
self.list.append(getConfigListEntry(_('Select Cam 1'), self.cam1sel))
if len(self.emuStart) > 1:
self['actifcam2'].show()
if self.cam1sel.value != _(
'no cam') or config.softcam.actCam.value != _(
'no CAM 1 active'):
self.list.append(
getConfigListEntry(_('Select Cam 2'), self.cam2sel))
if self.cam2sel.value != _('no cam'):
self.list.append(
getConfigListEntry(_('Wait time before start Cam 2'),
config.softcam.waittime))
else:
self['actifcam2'].hide()
self.cam2sel.setValue(_('no cam'))
self['config'].list = self.list
self['config'].setList(self.list)
return
def setYellowKey(self, cam):
if cam == None or cam == _('no cam'):
self.YellowAction = REFRESH
self['key_yellow'].setText(_('Refresh'))
return
else:
if cam.upper().startswith('CCCAM'):
self.YellowAction = CCCAMINFO
self['key_yellow'].setText(_('CCcamInfo'))
elif cam.upper().startswith('OSCAM'):
self.YellowAction = OSCAMINFO
self['key_yellow'].setText(_('OscamInfo'))
else:
self.YellowAction = REFRESH
self['key_yellow'].setText(_('Refresh'))
return
def selectionChanged(self):
pass
def changedEntry(self):
for x in self.onChangedEntry:
x()
self.selectionChanged()
self.createSetup()
def getCurrentEntry(self):
return self['config'].getCurrent()[0]
def getCurrentValue(self):
return str(self['config'].getCurrent()[1].getText())
def getCurrentDescription(self):
return self['config'].getCurrent() and len(self['config'].getCurrent(
)) > 2 and self['config'].getCurrent()[2] or ''
def layoutFinished(self):
global oldcamIndex
global oldcam2Index
self.Timer.stop()
if not Check_Softcam():
self.Exit()
try:
self.whichCam()
oldcamIndex = -1
oldcam2Index = -1
tel = 0
if self.curcam:
oldcamIndex = self.curcamIndex
actcam = self.mlist[oldcamIndex]
if self.first == 0:
self.cam1sel.setValue(actcam)
self['key_green'].setText(_('ReStart'))
self['actifcam'].setText(_('active CAM 1: ') + actcam)
print '[SOFTCAM] set active cam 1 to: ' + actcam
else:
actcam = _('no CAM 1 active')
self['actifcam'].setText(actcam)
if self.curcam2:
oldcam2Index = self.curcam2Index
actcam = self.mlist[oldcam2Index]
if self.first == 0:
self.cam2sel.setValue(actcam)
self['actifcam2'].setText(_('active CAM 2: ') + actcam)
print '[SOFTCAM] set active cam 2 to: ' + actcam
else:
actcam2 = _('no CAM 2 active')
self['actifcam2'].setText(actcam2)
if self.first == 0:
self.createSetup()
self.first = 1
if not self.curcam and not self.curcam2:
self['key_green'].setText(_('Start'))
self.YellowAction = REFRESH
self['key_yellow'].setText(_('Refresh'))
if os.path.exists('/tmp/ecm.info') is True:
os.system('rm /tmp/ecm.info')
if os.path.exists('/tmp/ecm0.info') is True:
os.system('rm /tmp/ecm0.info')
except:
pass
if self['config'].getCurrent()[0] == _('Select Cam 1'):
self.setYellowKey(self.curcam)
else:
self.setYellowKey(self.curcam2)
ecmi = ''
if os.path.exists('/tmp/ecm.info') is True:
ecmi = self.read_ecm('/tmp/ecm.info')
elif os.path.exists('/tmp/ecm1.info') is True:
ecmi = self.read_ecm('/tmp/ecm1.info')
else:
ecmi = _('No ECM info')
ecmold = self['ecminfo'].getText()
if ecmold == ecmi:
self.ecmtel += 1
if self.ecmtel > 5:
ecmi = _('No new ECM info')
else:
self.ecmtel = 0
self['ecminfo'].setText(ecmi)
self.Timer.start(2000, True)
def read_shareinfo(self):
self.shareinfo = []
if os.path.exists('/tmp/share.info') is True:
s = open('/tmp/share.info')
for x in s.readlines():
self.shareinfo.append(x)
s.close()
def read_ecm(self, ecmpath):
ecmi2 = ''
Caid = ''
Prov = ''
f = open(ecmpath)
for line in f.readlines():
line = line.replace('=', '')
line = line.replace(' ', '', 1)
if line.find('ECM on CaID') > -1:
k = line.find('ECM on CaID') + 14
Caid = line[k:k + 4]
if line.find('prov:') > -1:
tmpprov = line.split(':')
Prov = tmpprov[1].strip()
if Caid != '' and Prov != '' and len(self.shareinfo) > 0:
for x in self.shareinfo:
cel = x.split(' ')
if cel[5][0:4] == Caid and cel[9][3:7] == Prov:
line = 'Peer: ' + Prov + ' - ' + cel[
3] + ' - ' + cel[8] + '\n'
break
ecmi2 = ecmi2 + line
f.close()
return ecmi2
def Red(self):
self.Timer.stop()
self.Stopcam()
self.Timer.start(2000, True)
def Yellow(self):
if self.YellowAction == CCCAMINFO:
self.Timer.stop()
self.session.openWithCallback(self.ShowSoftcamCallback,
CCcamInfoMain)
elif self.YellowAction == OSCAMINFO:
self.Timer.stop()
self.session.openWithCallback(self.ShowSoftcamCallback,
OscamInfoMenu)
else:
self.first = 0
self.layoutFinished()
def Green(self):
self.Timer.stop()
self.Startcam()
self.Timer.start(2000, True)
def Exit(self):
self.Timer.stop()
self.close()
def Blue(self):
if not self.partyfeed:
self.Exit()
else:
self.Timer.stop()
self.session.openWithCallback(self.ShowSoftcamCallback,
ShowSoftcamPackages)
def ShowSoftcamCallback(self):
self.Timer.start(2000, True)
def ok(self):
self.Timer.stop()
self.Startcam()
if self.YellowAction == REFRESH:
self.Yellow()
self.Timer.start(2000, True)
def Stopcam(self):
if oldcamIndex >= 0:
oldcam = self.emuBin[oldcamIndex]
else:
oldcam = None
if oldcam2Index >= 0:
oldcam2 = self.emuBin[oldcam2Index]
else:
oldcam2 = None
import time
self.container = eConsoleAppContainer()
if config.softcam.camstartMode.value == '0' or not fileExists(
'/etc/init.d/softcam'):
if oldcam:
print '[SOFTCAM] Python stop cam 1: ' + oldcam
self.container.execute(self.emuStop[oldcamIndex])
time.sleep(1)
t = 0
while t < 5:
p = command('pidof %s |wc -w' % oldcam)
if not p.isdigit():
p = 0
if int(p) > 0:
self.container = eConsoleAppContainer()
self.container.execute('killall -9 ' + oldcam)
t += 1
time.sleep(1)
else:
t = 5
if oldcam2:
print '[SOFTCAM] Python stop cam 2: ' + oldcam2
self.container.execute(self.emuStop[oldcam2Index])
time.sleep(1)
t = 0
while t < 5:
p = command('pidof %s |wc -w' % oldcam2)
if not p.isdigit():
p = 0
if int(p) > 0:
self.container = eConsoleAppContainer()
self.container.execute('killall -9 ' + oldcam2)
t += 1
time.sleep(1)
else:
t = 5
else:
self.container.execute('/etc/init.d/softcam.cam1 stop')
self.container.execute('/etc/init.d/softcam.cam2 stop')
if os.path.exists('/tmp/ecm.info') is True:
os.system('rm /tmp/ecm.info')
actcam = _('no CAM 1 active')
actcam2 = _('no CAM 2 active')
self['actifcam'].setText(actcam)
self['actifcam2'].setText(actcam2)
self['key_green'].setText(_('Start'))
self['ecminfo'].setText(_('No ECM info'))
self.Save_Settings(actcam)
self.Save_Settings2(actcam2)
return
def Startcam(self):
try:
if count > 0:
if self.cam1sel.value == self.cam2sel.value:
self.session.openWithCallback(
self.doNothing,
MessageBox,
_('No Cam started !!\n\nCam 1 must be different from Cam 2'
),
MessageBox.TYPE_ERROR,
simple=True)
return
if config.softcam.camstartMode.value == '0':
self.Stopcam()
self.camIndex = self.cam1sel.getIndex() - 1
self.cam2Index = self.cam2sel.getIndex() - 1
if self.camIndex >= 0:
actcam = self.cam1sel.value
self['actifcam'].setText(_('active CAM 1: ') + actcam)
self.Save_Settings(actcam)
start = self.emuStart[self.camIndex]
if self.checkBinName(self.emuBin[self.camIndex], start):
self.session.openWithCallback(
self.startcam2,
MessageBox,
actcam +
_(' Not Started !!\n\nCam binname must be in the start command line\nCheck your emu config file'
),
MessageBox.TYPE_ERROR,
simple=True)
return
if config.softcam.camstartMode.value == '0':
print '[SOFTCAM] Python start cam 1: ' + actcam
self.session.openWithCallback(self.waitTime,
MessageBox,
_('Starting Cam 1: ') +
actcam,
MessageBox.TYPE_WARNING,
timeout=5,
simple=True)
self.container = eConsoleAppContainer()
self.container.execute(start)
else:
self.session.openWithCallback(
self.doNothing,
MessageBox,
_('Creating start scripts and starting the cam'),
MessageBox.TYPE_WARNING,
timeout=10,
simple=True)
self.Save_Settings2(self.cam2sel.value)
camname1 = self.emuBin[self.camIndex]
camname2 = self.emuBin[self.cam2Index]
self.deleteInit()
camname = '/usr/bin/' + camname1
startcmd = self.emuStart[self.camIndex]
stopcmd = self.emuStop[self.camIndex]
self.createInitdscript('cam1', camname, startcmd,
stopcmd)
if self.cam2Index >= 0:
camname = '/usr/bin/' + camname2
startcmd = self.emuStart[self.cam2Index]
stopcmd = self.emuStop[self.cam2Index]
self.createInitdscript(
'cam2', camname, startcmd, stopcmd,
config.softcam.waittime.value)
self['key_green'].setText(_('ReStart'))
except:
pass
def waitTime(self, ret):
if self.cam2Index >= 0:
if config.softcam.waittime.value == '0':
self.startcam2(None)
else:
self.session.openWithCallback(
self.startcam2,
MessageBox,
_('Waiting...'),
MessageBox.TYPE_WARNING,
timeout=int(config.softcam.waittime.value),
simple=True)
return
def doNothing(self, ret):
pass
def startcam2(self, ret):
camIndex = self.cam2Index
if camIndex >= 0:
actcam = self.cam2sel.value
self['actifcam2'].setText(_('active CAM 2: ') + actcam)
self.Save_Settings2(actcam)
start = self.emuStart[camIndex]
if self.checkBinName(self.emuBin[self.cam2Index], start):
self.session.open(
MessageBox,
actcam +
_(' Not Started !!\n\nCam binname must be in the start command line\nCheck your emu config file'
),
MessageBox.TYPE_ERROR,
simple=True)
return
print '[SOFTCAM] Python start cam 2: ' + actcam
self.session.open(MessageBox,
_('Starting Cam 2: ') + actcam,
MessageBox.TYPE_WARNING,
timeout=5,
simple=True)
self.container = eConsoleAppContainer()
self.container.execute(start)
def Save_Settings(self, cam_name):
config.softcam.actCam.setValue(cam_name)
config.softcam.save()
configfile.save()
def Save_Settings2(self, cam_name):
config.softcam.actCam2.setValue(cam_name)
config.softcam.save()
configfile.save()
def isCamrunning(self, cam):
p = command('pidof ' + cam + ' |wc -w')
if not p.isdigit():
p = 0
if int(p) > 0:
return True
else:
return False
def checkBinName(self, binname, start):
print '[CHECKBINNAME] bin=%s ,start=%s' % (binname, start)
if start.find(binname + ' ') > -1:
print '[CHECKBINNAME] OK'
return False
elif start[start.rfind('/') + 1:] == binname:
print '[CHECKBINNAME] OK'
return False
else:
print '[CHECKBINNAME] ERROR'
return True
def createInitdscript(self, camname, emubin, start, stop, wait=None):
Adir = '/etc/init.d/softcam.' + camname
softcamfile = []
softcamfile.append('#!/bin/sh')
softcamfile.append('DAEMON=%s' % emubin)
softcamfile.append('STARTCAM="%s"' % start)
softcamfile.append('STOPCAM="%s"' % stop)
softcamfile.append('DESC="Softcam"')
softcamfile.append('')
softcamfile.append('test -f $DAEMON || exit 0')
softcamfile.append('set -e')
softcamfile.append('')
softcamfile.append('case "$1" in')
softcamfile.append('\tstart)')
softcamfile.append('\t\techo -n "starting $DESC: $DAEMON... "')
if wait:
softcamfile.append('\t\tsleep ' + wait)
softcamfile.append('\t\t$STARTCAM')
softcamfile.append('\t\techo "done."')
softcamfile.append('\t\t;;')
softcamfile.append('\tstop)')
softcamfile.append('\t\techo -n "stopping $DESC: $DAEMON... "')
softcamfile.append('\t\t$STOPCAM')
softcamfile.append('\t\techo "done."')
softcamfile.append('\t\t;;')
softcamfile.append('\trestart)')
softcamfile.append('\t\techo "restarting $DESC: $DAEMON... "')
softcamfile.append('\t\t$0 stop')
softcamfile.append('\t\techo "wait..."')
softcamfile.append('\t\tsleep 5')
softcamfile.append('\t\t$0 start')
softcamfile.append('\t\techo "done."')
softcamfile.append('\t\t;;')
softcamfile.append('\t*)')
softcamfile.append('\t\techo "Usage: $0 {start|stop|restart}"')
softcamfile.append('\t\texit 1')
softcamfile.append('\t\t;;')
softcamfile.append('esac')
softcamfile.append('')
softcamfile.append('exit 0')
f = open(Adir, 'w')
for x in softcamfile:
f.writelines(x + '\n')
f.close()
self.container = eConsoleAppContainer()
os.chmod(Adir, 493)
if not os.path.exists('/etc/rc2.d/S20softcam.' + camname):
self.container.execute('update-rc.d -f softcam.' + camname +
' defaults')
import time
time.sleep(3)
if self.isCamrunning(emubin):
self.container.execute('/etc/init.d/softcam.' + camname +
' restart')
else:
self.container.execute('/etc/init.d/softcam.' + camname + ' start')
def deleteInit(self):
if os.path.exists('/etc/rc2.d/S20softcam.cam1'):
print 'Delete Symbolink link'
self.container = eConsoleAppContainer()
self.container.execute('update-rc.d -f softcam.cam1 defaults')
if os.path.exists('/etc/init.d/softcam.cam1'):
print 'Delete softcam init script cam1'
os.system('rm /etc/init.d/softcam.cam1')
if os.path.exists('/etc/rc2.d/S20softcam.cam2'):
print 'Delete Symbolink link'
self.container = eConsoleAppContainer()
self.container.execute('update-rc.d -f softcam.cam2 defaults')
if os.path.exists('/etc/init.d/softcam.cam2'):
print 'Delete softcam init script cam2'
os.system('rm /etc/init.d/softcam.cam2')
