def fieldomni(self, freq, fieldintensity, degreestep=5, poweram1=None, transfer=False):
sg_output_limit = -5 # unit is dBm set the signal generator output limit
omnifield = []
iteration = 5
degree = 0
tkinter.messagebox.showinfo(title="提示", message="将要进行频率%f场强%f的测试\n" % (freq, fieldintensity))
ETSProbe.__init__(self)
Zeta.__init__(self)
times = 360 / degreestep
iteration += times
if transfer is False:
field = cal_field(freq, fieldintensity)
powertarget = field[0]
else:
if poweram1 is not None:
powertarget = poweram1
else:
return "wrong input power target"
frequency = freq * 1000000000
powersignal = -30
self.SGPowerSet(powersignal)
self.SGCWFrec(frequency)
self.PMSetFreq(frequency)
self.PABand(frequency)
self.SGPowerOut("ON")
self.PAPowerOut("ON")
time.sleep(2)
for i in range(5):
time.sleep(2)
pmpower = self.PMFetch()
print("当前第%d循环的功率计读数为%f" % (i + 1, pmpower))
powerdiff = powertarget - pmpower
powersignal += powerdiff
if self.SGInRange(powersignal) and powersignal < sg_output_limit:
self.SGPowerSet(powersignal)
else:
self.SGPowerOut("OFF")
self.PAPowerOut("OFF")
return "Error input signal generator power"
for i in range(times):
time.sleep(2)
pmpower = self.PMFetch()
print("当前第%d循环的功率计读数为%f" % (i + 1, pmpower))
powerdiff = powertarget - pmpower
powersignal += powerdiff
self.SGPowerSet(powersignal)
if self.ProbeStatus() == 0 and degree == 0:
omnifield.append([])
omnifield[i].append(degree)
omnifield[i].append(self.ProbeField()[3])
degree += 5
else:
omnifield.append([])
omnifield[i].append(degree)
self.ZetaRoll(degreestep)
omnifield[i].append(self.ProbeField()[3])
i += 1
degree += 5
return omnifield
def FieldProb(self, freq, fieldintensity, transfer=False):
"""Produce the fieldintensity of specified frequency
:param transfer:
:param fieldintensity:
:param freq:
"""
global powersg
sg_output_limit = -5 # unit is dBm set the signal generator output limit
tkinter.messagebox.showinfo(title='提示', message='请连接好电场探头\n')
field = cal_field(freq, fieldintensity)
print(field)
if transfer:
self.db.BasicCursor.execute("SELECT PowerCal FROM FieldTransfer WHERE Frequency=%f AND Field=%f"
% (freq, fieldintensity))
powertarget = self.db.BasicCursor.fetchall()[0][0]
if powertarget == 0:
tkinter.messagebox.showinfo(title='提示', message='输入场强无法传递\n')
return
else:
powertarget = field[0]
# change cable module to be updated #
# angel = self.ct.CTReadAngel()
# antennachange = ['ETS3160-0316001', 'ETS3160-0316002', 'ETS3160-0316003']
# if antenna not in antennachange and angel != 90:
# self.ct.CTRoll(180)
tkinter.messagebox.showinfo(title='提示', message="请确定天线更换完毕并且射频线连接正确")
if transfer:
self.ct.CTRoll(90)
else:
antenna = field[2]
tkinter.messagebox.showinfo(title='提示', message="请连接%s天线进行测试" % antenna)
self.ct.CTAntennaRoll(antenna)
sg_initial = -30
self.sg.SGPowerSet(sg_initial) # set the initial power unit dBm
# frequency set
frequency = freq * 1e9
self.sg.SGCWFrec(frequency)
self.pm.PMSetFreq(frequency)
self.pa.PAPowerOut('OFF')
time.sleep(5)
self.pa.PABand(frequency)
self.sg.SGPowerOut('On')
self.pa.PAPowerOut('ON')
time.sleep(5)
for i in range(0, 4): # iterate the power output
time.sleep(2) # delay 1 second
if i == 0:
powercoup = self.pm.PMFetch()
print('当前第%d循环的功率计读数为%f' % (i + 1, powercoup))
powerdiff = powertarget - powercoup
powersg = sg_initial + powerdiff
if self.sg.SGInRange(powersg) and powersg < sg_output_limit:
self.sg.SGPowerSet(powersg)
else:
tkinter.messagebox.showinfo(title='Alert', message="Error input signal generator power")
return "Error input signal generator power"
else:
powercoup = self.pm.PMFetch()
print('当前第%d循环的功率计读数为%f' % (i + 1, powercoup))
powerdiff = powertarget - powercoup
powersg += powerdiff
if self.sg.SGInRange(powersg) and powersg < sg_output_limit:
self.sg.SGPowerSet(powersg)
else:
tkinter.messagebox.showinfo(title='Alert', message="Error input signal generator power")
return "Error input signal generator power"
if self.fieldread == 'ETS':
try:
self.ETS = ETSProbe()
except:
tkinter.messagebox.showinfo(title='提示', message="无ETS探头连接")
# fieldreading = self.ETS.ProbeField()[3]
fieldreading = self.ETS.ProbeField()[0]
self.ETS.RemoveProbe()
else:
try:
fieldreading = float(input('请输入电场探头示值:'))
except:
print('输入数据有误')
try:
fieldreading = float(input('请重新输入电场探头示值:'))
except:
print('输入数据有误')
fieldreading = float(input('请重新输入电场探头示值:'))
try:
self.db.Cursor.execute("INSERT INTO FieldTest (Frequency, Field, FieldResult, TestSeries) "
"VALUES (%f, %f, %f, %f)" % (freq, fieldintensity, fieldreading, self.db.TestSeriesNo))
self.db.Cursor.commit()
except:
print('结果写入数据库失败')
# set return value
if fieldreading:
return fieldreading
else:
return 'wrong output'
def fieldomni(self, freq, fieldintensity, degreestep=5, transfer=False):
if not self.db.Cursor.tables(table='FieldOmni_%sGHz_%sV' % (freq, fieldintensity)).fetchone():
try:
self.db.Cursor.execute("Create TABLE FieldOmni_%sGHz_%sV" % (freq, fieldintensity))
self.db.Cursor.commit()
except:
pass
try:
self.db.Cursor.execute("alter table FieldOmni_%sGHz_%sV add Degree DOUBLE "
% (freq, fieldintensity))
self.db.Cursor.commit()
except:
pass
try:
self.db.Cursor.execute("alter table FieldOmni_%sGHz_%sV add Field DOUBLE "
% (freq, fieldintensity))
self.db.Cursor.commit()
except:
pass
try:
self.db.Cursor.execute("alter table FieldOmni_%sGHz_%sV add TestSeriesNo DOUBLE "
% (freq, fieldintensity))
self.db.Cursor.commit()
except:
pass
sg_output_limit = -5 # unit is dBm set the signal generator output limit
degree = 0
tkinter.messagebox.showinfo(title='提示', message='将要进行频率%f场强%f的各向同性测试, 请连接好探头和电机\n'
% (freq, fieldintensity))
times = int(360 / degreestep)
if transfer is False:
field = cal_field(freq, fieldintensity)
print(field)
antenna = field[2]
powertarget = field[0]
self.ct.CTAntennaRoll(antenna)
else:
self.db.BasicCursor.execute("SELECT PowerCal FROM FieldTransfer WHERE Frequency=%f AND Field=%f"
% (freq, fieldintensity))
powertarget = self.db.BasicCursor.fetchall()[0][0]
if powertarget == 0:
tkinter.messagebox.showinfo(title='提示', message='输入场强无法传递\n')
return
self.ct.CTRoll(89)
frequency = freq * 1e9
powersignal = -30
self.sg.SGPowerSet(powersignal)
self.sg.SGCWFrec(frequency)
self.pm.PMSetFreq(frequency)
self.pa.PABand(frequency)
self.sg.SGPowerOut('ON')
self.pa.PAPowerOut('ON')
time.sleep(5)
for i in range(5):
time.sleep(2)
pmpower = self.pm.PMFetch()
print('当前第%d循环的功率计读数为%f' % (i + 1, pmpower))
powerdiff = powertarget - pmpower
powersignal += powerdiff
if self.sg.SGInRange(powersignal) and powersignal < sg_output_limit:
self.sg.SGPowerSet(powersignal)
else:
self.sg.SGPowerOut('OFF')
self.pa.PAPowerOut('OFF')
return "Error input signal generator power"
for i in range(times):
pmpower = self.pm.PMFetch()
print('当前第%d循环的功率计读数为%f' % (i + 1, pmpower))
powerdiff = powertarget - pmpower
powersignal += powerdiff
self.sg.SGPowerSet(powersignal)
time.sleep(3)
if self.fieldread == 'ETS':
try:
self.ETS = ETSProbe()
except:
tkinter.messagebox.showinfo(title='提示', message="无ETS探头连接")
fieldreading = self.ETS.ProbeField()[3]
self.ETS.RemoveProbe()
else:
try:
fieldreading = float(input('请输入电场探头示值:'))
except:
print('输入数据有误')
try:
fieldreading = float(input('请重新输入电场探头示值:'))
except:
print('输入数据有误')
fieldreading = float(input('请重新输入电场探头示值:'))
if degree == 0:
try:
self.db.Cursor.execute("INSERT INTO FieldOmni_%sGHz_%sV (Degree, Field, TestSeriesNo) VALUES"
" (%f, %f, %d)"
% (freq, fieldintensity, degree, fieldreading, self.db.TestSeriesNo))
self.db.Cursor.commit()
except:
print('结果写入数据库失败')
degree += 5
else:
try:
self.db.Cursor.execute("INSERT INTO FieldOmni_%sGHz_%sV (Degree, Field, TestSeriesNo) VALUES"
" (%f, %f, %d)"
% (freq, fieldintensity, degree, fieldreading, self.db.TestSeriesNo))
self.db.Cursor.commit()
self.zeta.ZetaRoll(degreestep)
except:
print('结果写入数据库失败')
degree += 5
def FieldProb(self, freq, fieldintensity, fieldread=None, cal=None, powerspec=-100):
"""Produce the fieldintensity of specified frequency
:param powerspec:
:param cal:
:param fieldread:
:param fieldintensity:
:param freq:
"""
global powersg
sg_output_limit = -5 # unit is dBm set the signal generator output limit
app = QApplication(sys.argv)
fieldreading = []
if fieldread == "ETS":
ms = QMessageBox(QMessageBox.Warning, "提示", "请连接好ETS探头")
ms.show()
app.exec_()
ETSProbe.__init__(self)
elif fieldread == "Narda" or None == fieldread:
ms = QMessageBox(QMessageBox.Warning, "提示", "请连接好Narda探头")
ms.show()
app.exec_()
else:
ms = QMessageBox(QMessageBox.Warning, "Alert", "Wrong fieldread 参数")
ms.show()
app.exec_()
return "Wrong fieldread 参数"
field = cal_field(freq, fieldintensity)
print(field)
# p_meter_disp_dbm, coupler, antenna, e_cal_1w
if cal is not None:
print(powerspec)
powertarget = powerspec
else:
powertarget = field[0]
antenna = field[2]
ms = QMessageBox(QMessageBox.Warning, "提示", "请连接%s天线进行测试" % antenna)
ms.show()
app.exec_()
# self.CTAntennaChange(antenna)
ms = QMessageBox(QMessageBox.Warning, "提示", "请确定天线更换完毕并且射频线连接正确")
ms.show()
app.exec_()
self.CTAntennaRoll(antenna)
sg_initial = -30
self.SGPowerSet(sg_initial) # set the initial power unit dBm
# frequency set
frequency = freq * 1000000000
self.SGCWFrec(frequency)
self.PMSetFreq(frequency)
self.PABand(frequency)
self.SGPowerOut("On")
self.PAPowerOut("ON")
for i in range(0, 6): # iterate the power output
time.sleep(2) # delay 1 second
if i == 0:
powercoup = self.PMFetch()
print("当前第%d循环的功率计读数为%f" % (i + 1, powercoup))
powerdiff = powertarget - powercoup
powersg = sg_initial + powerdiff
if self.SGInRange(powersg) and powersg < sg_output_limit:
self.SGPowerSet(powersg)
else:
ms = QMessageBox(QMessageBox.Warning, "Alert", "Error input signal generator power")
ms.show()
app.exec_()
if fieldread == "ETS":
self.RemoveProbe()
return "Error input signal generator power"
elif i <= 9:
powercoup = self.PMFetch()
print("当前第%d循环的功率计读数为%f" % (i + 1, powercoup))
powerdiff = powertarget - powercoup
powersg += powerdiff
if self.SGInRange(powersg) and powersg < sg_output_limit:
self.SGPowerSet(powersg)
elif 3 > powerdiff > 1:
ms = QMessageBox(QMessageBox.Warning, "提示", "功放到达1dB压缩点")
ms.show()
app.exec_()
break
else:
ms = QMessageBox(QMessageBox.Warning, "Alert", "Error input signal generator power")
ms.show()
app.exec_()
if fieldread == "ETS":
self.RemoveProbe()
return "Error input signal generator power"
if fieldread is None or fieldread == "Narda":
fieldreading = float(input("请输入电厂探头示值:"))
elif fieldread == "ETS":
fieldreading.append(freq)
fieldreading.append(self.ProbeField()[3])
fieldreading.append(powertarget)
fieldreading.append(field[4])
ms = QMessageBox(QMessageBox.Warning, "提示", "请确定测试完毕")
ms.show()
app.exec_()
self.RemoveProbe()
else:
self.PAPowerOut("OFF")
self.SGPowerOut("OFF")
self.PAPowerOut("OFF")
self.SGPowerOut("OFF")
try:
self.Cursor.execute(
"INSERT INTO FieldTest (Frequency, Field, FieldResult, TestSeries) "
"VALUES (%f, %f, %f, %f)" % (freq, fieldintensity, fieldreading, self.TestSeriesNo)
)
self.Cursor.commit()
except:
print("结果写入数据库失败")
# set return value
if fieldreading:
return fieldreading
else:
return "wrong output"
def fieldtransfer(self, cal=0, startfreq=1, stopfreq=18, specfreq=None):
print(cal, startfreq, specfreq)
frequency = self.FieldTransferDB(deltable=0)
field = [10, 20, 30, 40, 50]
iterationfreq = len(frequency)
if cal == 0 and specfreq is None and startfreq == 1 and stopfreq == 18:
"""Calibration process, standard probe test"""
for i in range(iterationfreq):
for j in range(5):
self.TransferInit(frequency[i], field[j])
elif cal == 0 and specfreq is None and (startfreq != 1 or stopfreq != 18):
for i in range(iterationfreq):
for j in range(5):
if startfreq <= frequency[i] <= stopfreq:
self.TransferInit(frequency[i], field[j])
else:
pass
elif cal == 0 and specfreq is not None:
specfreq = list(specfreq)
iterationfreq = len(specfreq)
for i in range(iterationfreq):
for j in range(5):
self.TransferInit(specfreq[i], field[j])
elif cal == 1 and specfreq is None and startfreq == 1 and stopfreq == 18:
for i in range(iterationfreq):
for j in range(5):
self.BasicCursor.execute(
"SELECT * FROM FieldTransfer WHERE Frequency=%f " "AND Field=%f" % (frequency[i], field[j])
)
table = self.BasicCursor.fetchall()
tkinter.messagebox.showinfo(title="提示", message="将要进行频率%f场强%f的测试\n" % (frequency[i], field[j]))
if field[j] == 0:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET PowerCal=%f WHERE Frequency=%f "
"AND Cal=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.execute(
"UPDATE FieldTransfer SET FieldVerify=%f WHERE Frequency=%f "
"AND Cal=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
else:
print(self.TransferIteration(table[0][0], table[0][2]))
elif cal == 1 and specfreq is None and (startfreq != 1 or stopfreq != 18):
for i in range(iterationfreq):
for j in range(5):
if startfreq <= frequency[i] <= stopfreq:
self.BasicCursor.execute(
"SELECT * FROM FieldTransfer WHERE Frequency=%f " "AND Field=%f" % (frequency[i], field[j])
)
table = self.BasicCursor.fetchall()
tkinter.messagebox.showinfo(title="提示", message="将要进行频率%f场强%f的测试\n" % (frequency[i], field[j]))
print(self.TransferIteration(table[0][0], table[0][2]))
else:
pass
elif cal == 2 and specfreq is None and startfreq == 1 and stopfreq == 18:
for i in range(iterationfreq):
for j in range(5):
self.BasicCursor.execute(
"SELECT * FROM FieldTransfer WHERE Frequency=%f " "AND Field=%f" % (frequency[i], field[j])
)
table = self.BasicCursor.fetchall()
tkinter.messagebox.showinfo(title="提示", message="将要进行频率%f场强%f的测试\n" % (frequency[i], field[j]))
if table[0][3] != 0:
result = self.TransferVerify(table[0][0], table[0][3])
if result == "Error input signal generator power":
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaVerify=%f WHERE Frequency=%f "
"AND Field=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
else:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaVerify=%f WHERE Frequency=%f "
"AND Field=%f" % (result, frequency[i], field[j])
)
self.BasicCursor.commit()
print("频率%f场强%f的测试结果为%f" % (frequency[i], field[j], result))
else:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaVerify=%f WHERE Frequency=%f "
"AND Field=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
elif cal == 2 and specfreq is None and (startfreq != 1 or stopfreq != 18):
for i in range(iterationfreq):
for j in range(5):
if startfreq <= frequency[i] <= stopfreq:
self.BasicCursor.execute(
"SELECT * FROM FieldTransfer WHERE Frequency=%f " "AND Field=%f" % (frequency[i], field[j])
)
table = self.BasicCursor.fetchall()
tkinter.messagebox.showinfo(title="提示", message="将要进行频率%f场强%f的测试\n" % (frequency[i], field[j]))
if table[0][3] != 0:
result = self.TransferVerify(table[0][0], table[0][3])
if result == "Error input signal generator power":
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaVerify=%f WHERE Frequency=%f "
"AND Field=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
else:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaVerify=%f WHERE Frequency=%f "
"AND Field=%f" % (result, frequency[i], field[j])
)
self.BasicCursor.commit()
print("频率%f场强%f的测试结果为%f" % (frequency[i], field[j], result))
else:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaVerify=%f WHERE Frequency=%f "
"AND Field=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
else:
pass
elif cal == 3 and specfreq is None and startfreq == 1 and stopfreq == 18:
for i in range(iterationfreq):
for j in range(5):
table1 = cal_field(frequency[i], field[j])
antenna = table1[2]
self.CTAntennaRoll(antenna)
self.BasicCursor.execute(
"SELECT * FROM FieldTransfer WHERE Frequency=%f " "AND Field=%f" % (frequency[i], field[j])
)
table = self.BasicCursor.fetchall()
tkinter.messagebox.showinfo(title="提示", message="将要进行频率%f场强%f的测试\n" % (frequency[i], field[j]))
if frequency[i] == 4.3:
tkinter.messagebox.showinfo(title="提示", message="请注意更换耦合器\n")
if table[0][3] != 0:
result = self.TransferVerify(table[0][0], table1[0])
if result == "Error input signal generator power":
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaSTD=%f WHERE Frequency=%f "
"AND Field=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
else:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaSTD=%f WHERE Frequency=%f "
"AND Field=%f" % (result, frequency[i], field[j])
)
self.BasicCursor.commit()
print("频率%f场强%f的测试结果为%f" % (frequency[i], field[j], result))
else:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaSTD=%f WHERE Frequency=%f "
"AND Field=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
elif cal == 3 and specfreq is None and (startfreq != 1 or stopfreq != 18):
for i in range(iterationfreq):
for j in range(5):
if startfreq <= frequency[i] <= stopfreq:
table1 = cal_field(frequency[i], field[j])
antenna = table1[2]
self.CTAntennaRoll(antenna)
self.BasicCursor.execute(
"SELECT * FROM FieldTransfer WHERE Frequency=%f " "AND Field=%f" % (frequency[i], field[j])
)
table = self.BasicCursor.fetchall()
tkinter.messagebox.showinfo(title="提示", message="将要进行频率%f场强%f的测试\n" % (frequency[i], field[j]))
if frequency[i] == 4.3:
tkinter.messagebox.showinfo(title="提示", message="请注意更换耦合器\n")
if table[0][3] != 0:
result = self.TransferVerify(table[0][0], table1[0])
if result == "Error input signal generator power":
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaSTD=%f WHERE Frequency=%f "
"AND Field=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
else:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaSTD=%f WHERE Frequency=%f "
"AND Field=%f" % (result, frequency[i], field[j])
)
self.BasicCursor.commit()
print("频率%f场强%f的测试结果为%f" % (frequency[i], field[j], result))
else:
self.BasicCursor.execute(
"UPDATE FieldTransfer SET NardaSTD=%f WHERE Frequency=%f "
"AND Field=%f" % (0, frequency[i], field[j])
)
self.BasicCursor.commit()
else:
pass
else:
print("WTF")
def FieldProd(self, freq, fieldintensity):
"""Produce the fieldintensity of specified frequency"""
sg_output_limit = -5 # unit is dBm set the signal generator output limit
field = cal_field(freq, fieldintensity)
# p_meter_disp_dbm, coupler, antenna, e_cal_1w
powertarget = field[0]
coupler = field[1]
antenna = field[2]
app = QApplication(sys.argv)
ms = QMessageBox(QMessageBox.Warning, "提示", "请更换%s耦合器进行测试" % coupler)
ms.show()
app.exec_()
ms = QMessageBox(QMessageBox.Warning, "提示", "请连接%s天线进行测试" % antenna)
ms.show()
app.exec_()
self.CTAntennaChange(antenna)
ms = QMessageBox(QMessageBox.Warning, "提示", "请确定天线更换完毕并且射频线连接正确")
ms.show()
app.exec_()
self.CTAntennaRoll(antenna)
sg_initial = -30
self.SGPowerSet(sg_initial) # set the initial power unit dBm
# frequency set
frequency = freq * 1000000000
print(self.SGCWFrec(frequency))
print(self.PMSetFreq(frequency))
print(self.PABand(frequency))
self.SGPowerOut('On')
self.PAPowerOut('ON')
for i in range(0, 6): # iterate the power output
if i == 0:
powercouple = self.PMFetch()
print(powercouple)
powerdiff = powertarget - powercouple
powersg = sg_initial + powerdiff
if self.SGInRange(powersg) and powersg < sg_output_limit:
self.SGPowerSet(powersg)
else:
ms = QMessageBox(QMessageBox.Warning, 'Alert', "Error input signal generator power")
ms.show()
app.exec_()
break
else:
powercouple = self.PMFetch()
powerdiff = powertarget - powercouple
powersg += powerdiff
if self.SGInRange(powersg) and powersg < sg_output_limit:
self.SGPowerSet(powersg)
elif 3 > powerdiff > 1:
ms = QMessageBox(QMessageBox.Warning, "提示", "功放到达1dB压缩点")
ms.show()
app.exec_()
break
else:
ms = QMessageBox(QMessageBox.Warning, 'Alert', "Error input signal generator power")
ms.show()
app.exec_()
self.PAPowerOut('OFF')
self.SGPowerOut('OFF')
print(powercouple)
return field
