def finish(self):
## TODO Make sure it finishes when push "Close" or escape
FreeCAD.activeDocument().recompute()
self.call_sel = None
self.call_key = None
self.call_status = None
Modifier.finish(self)
def finish(self,closed=False,cont=False):
if self.ghost:
for typ in self.ghost:
for g in [i for i in self.ghost[typ]]:
if g.switch:
g.off()
g.finalize()
if cont and self.ui:
if self.ui.continueMode:
todo.delayAfter(self.Activated,[])
Modifier.finish(self)
def __init__(self):
Modifier.__init__(self)
self.keys = {
'g': lambda x: bimMove(x),
'r': lambda x: bimRotate(x),
#'s': lambda x: bimScale(x),
#'m': lambda x: bimMirror(x),
#'t': lambda x: bimStretch(x),
}
self.call_sel = None
self.call_key = None
self.call_status = None
self.selection = []
self.sel_options = sorted(selectionOption().keys())
self.sel_opt_no = 0
def Activated(self):
"""
Command activation method
"""
#generate a spiral with two radii given the arcs on either side
#and render it
Modifier.Activated(self, 'SpiralTest')
arc1 = {
'BearingIn': math.pi / 2.0,
'Radius': 2600.0,
'Delta': math.radians(44.821592613698),
'Start': App.Vector(),
'Direction': -1
}
arc1 = arc.get_parameters(arc1)
arc2 = {
'BearingIn': 0.0,
'Radius': 1750.0,
'Delta': math.radians(16.074936823812),
'Start': App.Vector(),
'Direction': -1
}
arc2 = arc.get_parameters(arc2)
def finish(self,closed=False,cont=False):
"finishes the arc"
if self.arctrack:
self.arctrack.finalize()
if self.ghost:
for typ in self.ghost:
for g in [i for i in self.ghost[typ]]:
if g.switch:
g.off()
g.finalize()
if cont and self.ui:
if self.ui.continueMode:
todo.delayAfter(self.Activated,[])
Modifier.finish(self)
if self.doc:
self.doc.recompute()
def Activated(self):
"""
Command activation method
"""
cz._zoom_camera(cz.Camera())
Modifier.Activated(self, 'TestZoom')
def Activated(self):
"""
Command activation method
"""
Modifier.Activated(self, 'Command')
self.tracker = editTracker(App.Vector(), 'test', 0)
def Activated(self):
"""
Command activation method
"""
#create alignment editing task
self.task = PivyTrackerTask()
Modifier.Activated(self, 'PivyTrackerCommand')
def Activated(self):
"""
Command activation method
"""
#create alignment editing task
self.task = SelectDragTask()
Modifier.Activated(self, 'SelectDragCommand')
def Activated(self):
"""
Command activation method
"""
panel = Panel()
Gui.Control.showDialog(panel)
Modifier.Activated(self, 'TrailsGuide')
def Activated(self):
self.name = translate("draft","Scale", utf8_decode=True)
Modifier.Activated(self,self.name)
self.ghost = None
if self.ui:
if not FreeCADGui.Selection.getSelection():
self.ui.selectUi()
msg(translate("draft", "Select an object to scale")+"\n")
self.call = self.view.addEventCallback("SoEvent",selectObject)
else:
self.proceed()
def Activated(self):
self.name = translate("draft", "BaseTransform", utf8_decode=True)
Modifier.Activated(self, self.name)
if self.ui:
if not FreeCADGui.Selection.getSelection():
self.ui.selectUi()
msg(translate("draft", "Select an object to edit") + "\n")
self.call_sel = \
self.view.addEventCallback("SoEvent", selectObject)
## TODO it should allow multiple selections
## TODO Ui should be more explanatory
else:
self.proceed()
def Activated(self):
"""
Command activation method
"""
self.doc = App.ActiveDocument
ViewState().view = Gui.ActiveDocument.ActiveView
#create alignment editing task
self.task = SpriteSplitterTask(self.doc)
Gui.Control.showDialog(self.task)
self.task.setup()
Modifier.Activated(self, 'SpriteSplitter')
def Activated(self):
"""
Command activation method
"""
self.doc = App.ActiveDocument
#create working, non-visual copy of horizontal alignment
obj = Gui.Selection.getSelection()[0]
data = obj.Proxy.get_data_copy()
self.doc = App.ActiveDocument
ViewState().view = Gui.ActiveDocument.ActiveView
#create alignment editing task
self.task = \
base_tracker_test_task.create(self.doc, data, obj, self.is_linked)
Gui.Control.showDialog(self.task)
self.task.setup()
Modifier.Activated(self, 'BaseTrackerTest')
def Activated(self):
"""
Command activation method
"""
self.doc = App.ActiveDocument
#create working, non-visual copy of horizontal alignment
obj = Gui.Selection.getSelection()[0]
data = obj.Proxy.get_data_copy()
self.doc = App.ActiveDocument
ViewState().view = Gui.ActiveDocument.ActiveView
#create alignment editing task
self.task = edit_alignment_task.create(self.doc, data, obj)
#cz._zoom_camera(cz.Camera())
Gui.Control.showDialog(self.task)
self.task.setup()
Modifier.Activated(self, 'EditAlignmentCommand')
def Activated(self):
from bimEdit import hideAttribute
self.name = translate("draft","bimMove", utf8_decode=True)
Modifier.Activated(self,self.name)
self.ghost = {}
for typ in self.sel_dict:
if typ not in self.ghost:
self.ghost.update({typ:[]})
for o in self.sel_dict[typ]:
self.ghost[typ].append(o.ghost[typ])
## Proceeding
if self.call:
self.view.removeEventCallback("SoEvent",self.call)
self.ui.pointUi(self.name)
self.ui.modUi()
if self.copymode:
self.ui.isCopy.setChecked(True)
self.ui.xValue.setFocus()
self.ui.xValue.selectAll()
self.call = self.view.addEventCallback("SoEvent",self.action)
msg(translate("draft", "Pick start point:")+"\n")
def Activated(self):
from bimEdit import hideAttribute
self.name = translate("draft","bimRotate", utf8_decode=True)
Modifier.Activated(self,self.name)
self.ghost = {}
for typ in self.sel_dict:
if typ not in self.ghost:
self.ghost.update({typ:[]})
for o in self.sel_dict[typ]:
self.ghost[typ].append(o.ghost[typ])
self.arctrack = None
## Proceeding
if self.call:
self.view.removeEventCallback("SoEvent",self.call)
self.step = 0
self.center = None
self.ui.arcUi()
self.ui.modUi()
self.ui.setTitle("Rotate")
self.arctrack = arcTracker()
self.call = self.view.addEventCallback("SoEvent",self.action)
msg(translate("draft", "Pick rotation center:")+"\n")
def Activated(self):
"""
Command activation method
"""
Modifier.Activated(self, 'Command')
def finish(self,closed=False,cont=False):
Modifier.finish(self)
if self.ghost:
self.ghost.finalize()