def validParams():
params = MooseObject.validParams()
params.addRequiredParam('average_load', 64.0, "Average load to allow")
params.addRequiredParam('max_processes', None,
"Hard limit of maxium processes to use")
return params
def validParams():
params = MooseObject.validParams()
params.addRequiredParam('average_load', 64.0, "Average load to allow")
params.addRequiredParam('max_processes', None, "Hard limit of maxium processes to use")
params.addParam('min_reported_time', 10, "The minimum time elapsed before a job is reported as taking to long to run.")
return params
def validParams():
params = MooseObject.validParams()
params.addRequiredParam('average_load', 64.0, "Average load to allow")
params.addRequiredParam('max_processes', None, "Hard limit of maxium processes to use")
params.addParam('min_reported_time', 10, "The minimum time elapsed before a job is reported as taking to long to run.")
return params
def validParams():
params = MooseObject.validParams()
# Common Options
params.addRequiredParam('type', "The type of test of Tester to create for this test.")
params.addParam('max_time', 300, "The maximum in seconds that the test will be allowed to run.")
params.addParam('min_reported_time', 10, "The minimum time elapsed before a test is reported as taking to long to run.")
params.addParam('skip', "Provide a reason this test will be skipped.")
params.addParam('deleted', "Tests that only show up when using the '-e' option (Permanently skipped or not implemented).")
params.addParam('heavy', False, "Set to True if this test should only be run when the '--heavy' option is used.")
params.addParam('group', [], "A list of groups for which this test belongs.")
params.addParam('prereq', [], "A list of prereq tests that need to run successfully before launching this test.")
params.addParam('skip_checks', False, "Tells the TestHarness to skip additional checks (This parameter is set automatically by the TestHarness during recovery tests)")
params.addParam('scale_refine', 0, "The number of refinements to do when scaling")
params.addParam('success_message', 'OK', "The successful message")
params.addParam('cli_args', [], "Additional arguments to be passed to the test.")
params.addParam('allow_test_objects', False, "Allow the use of test objects by adding --allow-test-objects to the command line.")
params.addParam('valgrind', 'NONE', "Set to (NONE, NORMAL, HEAVY) to determine which configurations where valgrind will run.")
# Test Filters
params.addParam('platform', ['ALL'], "A list of platforms for which this test will run on. ('ALL', 'DARWIN', 'LINUX', 'SL', 'LION', 'ML')")
params.addParam('compiler', ['ALL'], "A list of compilers for which this test is valid on. ('ALL', 'GCC', 'INTEL', 'CLANG')")
params.addParam('petsc_version', ['ALL'], "A list of petsc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('petsc_version_release', ['ALL'], "A test that runs against PETSc master if FALSE ('ALL', 'TRUE', 'FALSE')")
params.addParam('slepc_version', [], "A list of slepc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('mesh_mode', ['ALL'], "A list of mesh modes for which this test will run ('DISTRIBUTED', 'REPLICATED')")
params.addParam('method', ['ALL'], "A test that runs under certain executable configurations ('ALL', 'OPT', 'DBG', 'DEVEL', 'OPROF', 'PRO')")
params.addParam('library_mode', ['ALL'], "A test that only runs when libraries are built under certain configurations ('ALL', 'STATIC', 'DYNAMIC')")
params.addParam('dtk', ['ALL'], "A test that runs only if DTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_ids', ['ALL'], "A test that runs only if UNIQUE_IDs are enabled ('ALL', 'TRUE', 'FALSE')")
params.addParam('recover', True, "A test that runs with '--recover' mode enabled")
params.addParam('vtk', ['ALL'], "A test that runs only if VTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tecplot', ['ALL'], "A test that runs only if Tecplot is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('dof_id_bytes', ['ALL'], "A test that runs only if libmesh is configured --with-dof-id-bytes = a specific number, e.g. '4', '8'")
params.addParam('petsc_debug', ['ALL'], "{False,True} -> test only runs when PETSc is configured with --with-debugging={0,1}, otherwise test always runs.")
params.addParam('curl', ['ALL'], "A test that runs only if CURL is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tbb', ['ALL'], "A test that runs only if TBB is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('superlu', ['ALL'], "A test that runs only if SuperLU is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('slepc', ['ALL'], "A test that runs only if SLEPc is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_id', ['ALL'], "A test that runs only if libmesh is configured with --enable-unique-id ('ALL', 'TRUE', 'FALSE')")
params.addParam('cxx11', ['ALL'], "A test that runs only if CXX11 is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('asio', ['ALL'], "A test that runs only if ASIO is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('depend_files', [], "A test that only runs if all depend files exist (files listed are expected to be relative to the base directory, not the test directory")
params.addParam('env_vars', [], "A test that only runs if all the environment variables listed exist")
params.addParam('should_execute', True, 'Whether or not the executable needs to be run. Use this to chain together multiple tests based off of one executeable invocation')
params.addParam('required_submodule', [], "A list of initialized submodules for which this test requires.")
params.addParam('required_objects', [], "A list of required objects that are in the executable.")
params.addParam('check_input', False, "Check for correct input file syntax")
params.addParam('display_required', False, "The test requires and active display for rendering (i.e., ImageDiff tests).")
params.addParam('boost', ['ALL'], "A test that runs only if BOOT is detected ('ALL', 'TRUE', 'FALSE')")
# Queueing specific
params.addParam('copy_files', [], "Additional list of files/directories to copy when performing queueing operations")
params.addParam('link_files', [], "Additional list of files/directories to symlink when performing queueing operations")
params.addParam('queue_scheduler', True, "A test that runs only if using queue options")
return params
def validParams():
params = MooseObject.validParams()
# Common Options
params.addRequiredParam('type', "The type of test of Tester to create for this test.")
params.addParam('max_time', 300, "The maximum in seconds that the test will be allowed to run.")
params.addParam('min_reported_time', 10, "The minimum time elapsed before a test is reported as taking to long to run.")
params.addParam('skip', "Provide a reason this test will be skipped.")
params.addParam('deleted', "Tests that only show up when using the '-e' option (Permanently skipped or not implemented).")
params.addParam('heavy', False, "Set to True if this test should only be run when the '--heavy' option is used.")
params.addParam('group', [], "A list of groups for which this test belongs.")
params.addParam('prereq', [], "A list of prereq tests that need to run successfully before launching this test.")
params.addParam('skip_checks', False, "Tells the TestHarness to skip additional checks (This parameter is set automatically by the TestHarness during recovery tests)")
params.addParam('scale_refine', 0, "The number of refinements to do when scaling")
params.addParam('success_message', 'OK', "The successful message")
params.addParam('cli_args', [], "Additional arguments to be passed to the test.")
params.addParam('allow_test_objects', False, "Allow the use of test objects by adding --allow-test-objects to the command line.")
params.addParam('valgrind', 'NONE', "Set to (NONE, NORMAL, HEAVY) to determine which configurations where valgrind will run.")
# Test Filters
params.addParam('platform', ['ALL'], "A list of platforms for which this test will run on. ('ALL', 'DARWIN', 'LINUX', 'SL', 'LION', 'ML')")
params.addParam('compiler', ['ALL'], "A list of compilers for which this test is valid on. ('ALL', 'GCC', 'INTEL', 'CLANG')")
params.addParam('petsc_version', ['ALL'], "A list of petsc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('petsc_version_release', ['ALL'], "A test that runs against PETSc master if FALSE ('ALL', 'TRUE', 'FALSE')")
params.addParam('slepc_version', [], "A list of slepc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('mesh_mode', ['ALL'], "A list of mesh modes for which this test will run ('DISTRIBUTED', 'REPLICATED')")
params.addParam('method', ['ALL'], "A test that runs under certain executable configurations ('ALL', 'OPT', 'DBG', 'DEVEL', 'OPROF', 'PRO')")
params.addParam('library_mode', ['ALL'], "A test that only runs when libraries are built under certain configurations ('ALL', 'STATIC', 'DYNAMIC')")
params.addParam('dtk', ['ALL'], "A test that runs only if DTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_ids', ['ALL'], "A test that runs only if UNIQUE_IDs are enabled ('ALL', 'TRUE', 'FALSE')")
params.addParam('recover', True, "A test that runs with '--recover' mode enabled")
params.addParam('vtk', ['ALL'], "A test that runs only if VTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tecplot', ['ALL'], "A test that runs only if Tecplot is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('dof_id_bytes', ['ALL'], "A test that runs only if libmesh is configured --with-dof-id-bytes = a specific number, e.g. '4', '8'")
params.addParam('petsc_debug', ['ALL'], "{False,True} -> test only runs when PETSc is configured with --with-debugging={0,1}, otherwise test always runs.")
params.addParam('curl', ['ALL'], "A test that runs only if CURL is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tbb', ['ALL'], "A test that runs only if TBB is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('superlu', ['ALL'], "A test that runs only if SuperLU is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('slepc', ['ALL'], "A test that runs only if SLEPc is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_id', ['ALL'], "A test that runs only if libmesh is configured with --enable-unique-id ('ALL', 'TRUE', 'FALSE')")
params.addParam('cxx11', ['ALL'], "A test that runs only if CXX11 is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('asio', ['ALL'], "A test that runs only if ASIO is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('depend_files', [], "A test that only runs if all depend files exist (files listed are expected to be relative to the base directory, not the test directory")
params.addParam('env_vars', [], "A test that only runs if all the environment variables listed exist")
params.addParam('should_execute', True, 'Whether or not the executable needs to be run. Use this to chain together multiple tests based off of one executeable invocation')
params.addParam('required_submodule', [], "A list of initialized submodules for which this test requires.")
params.addParam('required_objects', [], "A list of required objects that are in the executable.")
params.addParam('check_input', False, "Check for correct input file syntax")
params.addParam('display_required', False, "The test requires and active display for rendering (i.e., ImageDiff tests).")
params.addParam('boost', ['ALL'], "A test that runs only if BOOT is detected ('ALL', 'TRUE', 'FALSE')")
# Queueing specific
params.addParam('copy_files', [], "Additional list of files/directories to copy when performing queueing operations")
params.addParam('link_files', [], "Additional list of files/directories to symlink when performing queueing operations")
params.addParam('queue_scheduler', True, "A test that runs only if using queue options")
return params
def validParams():
params = MooseObject.validParams()
params.addRequiredParam('average_load', 64.0, "Average load to allow")
params.addRequiredParam('max_processes', None, "Hard limit of maxium processes to use")
return params
def validParams():
params = MooseObject.validParams()
# Common Options
params.addRequiredParam(
'type', "The type of test of Tester to create for this test.")
params.addParam(
'max_time', 300,
"The maximum in seconds that the test will be allowed to run.")
params.addParam('skip', "Provide a reason this test will be skipped.")
params.addParam(
'deleted',
"Tests that only show up when using the '-e' option (Permanently skipped or not implemented)."
)
params.addParam(
'heavy', False,
"Set to True if this test should only be run when the '--heavy' option is used."
)
params.addParam('group', [],
"A list of groups for which this test belongs.")
params.addParam(
'prereq', [],
"A list of prereq tests that need to run successfully before launching this test."
)
params.addParam(
'skip_checks', False,
"Tells the TestHarness to skip additional checks (This parameter is set automatically by the TestHarness during recovery tests)"
)
params.addParam('scale_refine', 0,
"The number of refinements to do when scaling")
params.addParam('success_message', 'OK', "The successful message")
params.addParam('cli_args', [],
"Additional arguments to be passed to the test.")
params.addParam(
'allow_test_objects', False,
"Allow the use of test objects by adding --allow-test-objects to the command line."
)
params.addParam(
'valgrind', 'NONE',
"Set to (NONE, NORMAL, HEAVY) to determine which configurations where valgrind will run."
)
params.addParam('tags', [], "A list of strings")
params.addParam(
'max_buffer_size', None,
"Bytes allowed in stdout/stderr before it is subjected to being trimmed. Set to -1 to ignore output size restrictions. "
"If 'max_buffer_size' is not set, the default value of 'None' triggers a reasonable value (e.g. 100 kB)"
)
# Test Filters
params.addParam(
'platform', ['ALL'],
"A list of platforms for which this test will run on. ('ALL', 'DARWIN', 'LINUX', 'SL', 'LION', 'ML')"
)
params.addParam(
'compiler', ['ALL'],
"A list of compilers for which this test is valid on. ('ALL', 'GCC', 'INTEL', 'CLANG')"
)
params.addParam(
'petsc_version', ['ALL'],
"A list of petsc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)"
)
params.addParam(
'petsc_version_release', ['ALL'],
"A test that runs against PETSc master if FALSE ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'slepc_version', [],
"A list of slepc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)"
)
params.addParam(
'mesh_mode', ['ALL'],
"A list of mesh modes for which this test will run ('DISTRIBUTED', 'REPLICATED')"
)
params.addParam(
'method', ['ALL'],
"A test that runs under certain executable configurations ('ALL', 'OPT', 'DBG', 'DEVEL', 'OPROF', 'PRO')"
)
params.addParam(
'library_mode', ['ALL'],
"A test that only runs when libraries are built under certain configurations ('ALL', 'STATIC', 'DYNAMIC')"
)
params.addParam(
'dtk', ['ALL'],
"A test that runs only if DTK is detected ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'unique_ids', ['ALL'],
"A test that runs only if UNIQUE_IDs are enabled ('ALL', 'TRUE', 'FALSE')"
)
params.addParam('recover', True,
"A test that runs with '--recover' mode enabled")
params.addParam(
'vtk', ['ALL'],
"A test that runs only if VTK is detected ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'tecplot', ['ALL'],
"A test that runs only if Tecplot is detected ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'dof_id_bytes', ['ALL'],
"A test that runs only if libmesh is configured --with-dof-id-bytes = a specific number, e.g. '4', '8'"
)
params.addParam(
'petsc_debug', ['ALL'],
"{False,True} -> test only runs when PETSc is configured with --with-debugging={0,1}, otherwise test always runs."
)
params.addParam(
'curl', ['ALL'],
"A test that runs only if CURL is detected ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'threading', ['ALL'],
"A list of threading models ths tests runs with ('ALL', 'TBB', 'OPENMP', 'PTHREADS', 'NONE')"
)
params.addParam(
'superlu', ['ALL'],
"A test that runs only if SuperLU is available via PETSc ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'chaco', ['ALL'],
"A test that runs only if Chaco (partitioner) is available via PETSc ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'parmetis', ['ALL'],
"A test that runs only if Parmetis (partitioner) is available via PETSc ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'party', ['ALL'],
"A test that runs only if Party (partitioner) is available via PETSc ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'ptscotch', ['ALL'],
"A test that runs only if PTScotch (partitioner) is available via PETSc ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'slepc', ['ALL'],
"A test that runs only if SLEPc is available ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'unique_id', ['ALL'],
"A test that runs only if libmesh is configured with --enable-unique-id ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'cxx11', ['ALL'],
"A test that runs only if CXX11 is available ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'asio', ['ALL'],
"A test that runs only if ASIO is available ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
"fparser_jit", ['ALL'],
"A test that runs only if FParser JIT is available ('ALL', 'TRUE', 'FALSE')"
)
params.addParam(
'depend_files', [],
"A test that only runs if all depend files exist (files listed are expected to be relative to the base directory, not the test directory"
)
params.addParam(
'env_vars', [],
"A test that only runs if all the environment variables listed exist"
)
params.addParam(
'should_execute', True,
'Whether or not the executable needs to be run. Use this to chain together multiple tests based off of one executeable invocation'
)
params.addParam(
'required_submodule', [],
"A list of initialized submodules for which this test requires.")
params.addParam(
'required_objects', [],
"A list of required objects that are in the executable.")
params.addParam(
'required_applications', [],
"A list of required registered applications that are in the executable."
)
params.addParam('check_input', False,
"Check for correct input file syntax")
params.addParam(
'display_required', False,
"The test requires and active display for rendering (i.e., ImageDiff tests)."
)
params.addParam(
'timing', True,
"If True, the test will be allowed to run with the timing flag (i.e. Manually turning on performance logging)."
)
params.addParam(
'boost', ['ALL'],
"A test that runs only if BOOST is detected ('ALL', 'TRUE', 'FALSE')"
)
# SQA
params.addParam(
"requirement", None,
"The SQA requirement that this test satisfies (e.g., 'The Marker system shall provide means to mark elements for refinement within a box region.')"
)
params.addParam(
"design", [],
"The list of markdown files that contain the design(s) associated with this test (e.g., '/Markers/index.md /BoxMarker.md')."
)
params.addParam(
"issues", [],
"The list of github issues associated with this test (e.g., '#1234 #4321')"
)
params.addParam("validation", False,
"Set to True to mark test as a validation problem.")
params.addParam("verification", False,
"Set to True to mark test as a verification problem.")
return params
def validParams():
params = MooseObject.validParams()
# Common Options
params.addRequiredParam('type', "The type of test of Tester to create for this test.")
params.addParam('max_time', 300, "The maximum in seconds that the test will be allowed to run.")
params.addParam('skip', "Provide a reason this test will be skipped.")
params.addParam('deleted', "Tests that only show up when using the '-e' option (Permanently skipped or not implemented).")
params.addParam('heavy', False, "Set to True if this test should only be run when the '--heavy' option is used.")
params.addParam('group', [], "A list of groups for which this test belongs.")
params.addParam('prereq', [], "A list of prereq tests that need to run successfully before launching this test.")
params.addParam('skip_checks', False, "Tells the TestHarness to skip additional checks (This parameter is set automatically by the TestHarness during recovery tests)")
params.addParam('scale_refine', 0, "The number of refinements to do when scaling")
params.addParam('success_message', 'OK', "The successful message")
params.addParam('cli_args', [], "Additional arguments to be passed to the test.")
params.addParam('allow_test_objects', False, "Allow the use of test objects by adding --allow-test-objects to the command line.")
params.addParam('valgrind', 'NONE', "Set to (NONE, NORMAL, HEAVY) to determine which configurations where valgrind will run.")
params.addParam('tags', [], "A list of strings")
params.addParam('max_buffer_size', None, "Bytes allowed in stdout/stderr before it is subjected to being trimmed. Set to -1 to ignore output size restrictions. "
"If 'max_buffer_size' is not set, the default value of 'None' triggers a reasonable value (e.g. 100 kB)")
# Test Filters
params.addParam('platform', ['ALL'], "A list of platforms for which this test will run on. ('ALL', 'DARWIN', 'LINUX', 'SL', 'LION', 'ML')")
params.addParam('compiler', ['ALL'], "A list of compilers for which this test is valid on. ('ALL', 'GCC', 'INTEL', 'CLANG')")
params.addParam('petsc_version', ['ALL'], "A list of petsc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('petsc_version_release', ['ALL'], "A test that runs against PETSc master if FALSE ('ALL', 'TRUE', 'FALSE')")
params.addParam('slepc_version', [], "A list of slepc versions for which this test will run on, supports normal comparison operators ('<', '>', etc...)")
params.addParam('mesh_mode', ['ALL'], "A list of mesh modes for which this test will run ('DISTRIBUTED', 'REPLICATED')")
params.addParam('method', ['ALL'], "A test that runs under certain executable configurations ('ALL', 'OPT', 'DBG', 'DEVEL', 'OPROF', 'PRO')")
params.addParam('library_mode', ['ALL'], "A test that only runs when libraries are built under certain configurations ('ALL', 'STATIC', 'DYNAMIC')")
params.addParam('dtk', ['ALL'], "A test that runs only if DTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_ids', ['ALL'], "A test that runs only if UNIQUE_IDs are enabled ('ALL', 'TRUE', 'FALSE')")
params.addParam('recover', True, "A test that runs with '--recover' mode enabled")
params.addParam('vtk', ['ALL'], "A test that runs only if VTK is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('tecplot', ['ALL'], "A test that runs only if Tecplot is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('dof_id_bytes', ['ALL'], "A test that runs only if libmesh is configured --with-dof-id-bytes = a specific number, e.g. '4', '8'")
params.addParam('petsc_debug', ['ALL'], "{False,True} -> test only runs when PETSc is configured with --with-debugging={0,1}, otherwise test always runs.")
params.addParam('curl', ['ALL'], "A test that runs only if CURL is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('threading', ['ALL'], "A list of threading models ths tests runs with ('ALL', 'TBB', 'OPENMP', 'PTHREADS', 'NONE')")
params.addParam('superlu', ['ALL'], "A test that runs only if SuperLU is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('chaco', ['ALL'], "A test that runs only if Chaco (partitioner) is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('parmetis', ['ALL'], "A test that runs only if Parmetis (partitioner) is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('party', ['ALL'], "A test that runs only if Party (partitioner) is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('ptscotch', ['ALL'], "A test that runs only if PTScotch (partitioner) is available via PETSc ('ALL', 'TRUE', 'FALSE')")
params.addParam('slepc', ['ALL'], "A test that runs only if SLEPc is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('unique_id', ['ALL'], "A test that runs only if libmesh is configured with --enable-unique-id ('ALL', 'TRUE', 'FALSE')")
params.addParam('cxx11', ['ALL'], "A test that runs only if CXX11 is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('asio', ['ALL'], "A test that runs only if ASIO is available ('ALL', 'TRUE', 'FALSE')")
params.addParam("fparser_jit", ['ALL'], "A test that runs only if FParser JIT is available ('ALL', 'TRUE', 'FALSE')")
params.addParam('depend_files', [], "A test that only runs if all depend files exist (files listed are expected to be relative to the base directory, not the test directory")
params.addParam('env_vars', [], "A test that only runs if all the environment variables listed exist")
params.addParam('should_execute', True, 'Whether or not the executable needs to be run. Use this to chain together multiple tests based off of one executeable invocation')
params.addParam('required_submodule', [], "A list of initialized submodules for which this test requires.")
params.addParam('required_objects', [], "A list of required objects that are in the executable.")
params.addParam('required_applications', [], "A list of required registered applications that are in the executable.")
params.addParam('check_input', False, "Check for correct input file syntax")
params.addParam('display_required', False, "The test requires and active display for rendering (i.e., ImageDiff tests).")
params.addParam('timing', True, "If True, the test will be allowed to run with the timing flag (i.e. Manually turning on performance logging).")
params.addParam('boost', ['ALL'], "A test that runs only if BOOST is detected ('ALL', 'TRUE', 'FALSE')")
params.addParam('sympy', False, "If True, sympy is required.")
# SQA
params.addParam("requirement", None, "The SQA requirement that this test satisfies (e.g., 'The Marker system shall provide means to mark elements for refinement within a box region.')")
params.addParam("design", [], "The list of markdown files that contain the design(s) associated with this test (e.g., '/Markers/index.md /BoxMarker.md').")
params.addParam("issues", [], "The list of github issues associated with this test (e.g., '#1234 #4321')")
params.addParam("validation", False, "Set to True to mark test as a validation problem.")
params.addParam("verification", False, "Set to True to mark test as a verification problem.")
return params