class _CommandFrequencyAnalysis:
def GetResources(self):
return {'Pixmap': 'fem-frequency-analysis',
'MenuText': QtCore.QT_TRANSLATE_NOOP("Fem_Frequency_Analysis", "Run frequency analysis with CalculiX ccx"),
'Accel': "R, F",
'ToolTip': QtCore.QT_TRANSLATE_NOOP("Fem_Frequency_Analysis", "Write .inp file and run frequency analysis with CalculiX ccx")}
def Activated(self):
def load_results(ret_code):
if ret_code == 0:
self.fea.load_results()
else:
print "CalculiX failed ccx finished with error {}".format(ret_code)
self.fea = FemTools()
self.fea.reset_all()
self.fea.set_analysis_type('frequency')
message = self.fea.check_prerequisites()
if message:
QtGui.QMessageBox.critical(None, "Missing prerequisite", message)
return
self.fea.finished.connect(load_results)
QtCore.QThreadPool.globalInstance().start(self.fea)
def IsActive(self):
return FreeCADGui.ActiveDocument is not None and FemGui.getActiveAnalysis() is not None
class _CommandQuickAnalysis:
def GetResources(self):
return {'Pixmap': 'fem-quick-analysis',
'MenuText': QtCore.QT_TRANSLATE_NOOP("Fem_Quick_Analysis", "Run CalculiX ccx"),
'Accel': "R, C",
'ToolTip': QtCore.QT_TRANSLATE_NOOP("Fem_Quick_Analysis", "Write .inp file and run CalculiX ccx")}
def Activated(self):
def load_results(ret_code):
if ret_code == 0:
self.fea.load_results()
self.show_results_on_mesh()
else:
print "CalculiX failed ccx finished with error {}".format(ret_code)
self.fea = FemTools()
self.fea.reset_all()
message = self.fea.check_prerequisites()
if message:
QtGui.QMessageBox.critical(None, "Missing prerequisite", message)
return
self.fea.finished.connect(load_results)
QtCore.QThreadPool.globalInstance().start(self.fea)
def show_results_on_mesh(self):
#FIXME proprer mesh refreshing as per FreeCAD.FEM_dialog settings required
# or confirmation that it's safe to call restore_result_dialog
tp = _ResultControlTaskPanel()
tp.restore_result_dialog()
def IsActive(self):
return FreeCADGui.ActiveDocument is not None and FemGui.getActiveAnalysis() is not None
def calculixFinished(self, exitCode):
print "calculixFinished()", exitCode
print self.Calculix.state()
# Restore previous cwd
QtCore.QDir.setCurrent(self.cwd)
self.printCalculiXstdout()
self.Timer.stop()
self.femConsoleMessage("Calculix done!", "#00AA00")
self.form.pushButton_generate.setText("Re-run Calculix")
print "Loading results...."
self.femConsoleMessage("Loading result sets...")
self.form.label_Time.setText('Time: {0:4.1f}: '.format(time.time() - self.Start))
fea = FemTools()
fea.reset_all()
frd_result_file = os.path.splitext(self.inp_file_name)[0] + '.frd'
if os.path.isfile(frd_result_file):
QApplication.setOverrideCursor(Qt.WaitCursor)
ccxFrdReader.importFrd(frd_result_file, FemGui.getActiveAnalysis())
QApplication.restoreOverrideCursor()
self.femConsoleMessage("Loading results done!", "#00AA00")
else:
self.femConsoleMessage("Loading results failed! Results file doesn\'t exist", "#FF0000")
self.form.label_Time.setText('Time: {0:4.1f}: '.format(time.time() - self.Start))
def calculixFinished(self, exitCode):
print ("calculixFinished() {}".format(exitCode))
print (self.Calculix.state())
# Restore previous cwd
QtCore.QDir.setCurrent(self.cwd)
self.printCalculiXstdout()
self.Timer.stop()
self.femConsoleMessage("Calculix done!", "#00AA00")
self.form.pb_run_ccx.setText("Re-run CalculiX")
self.femConsoleMessage("Loading result sets...")
self.form.l_time.setText('Time: {0:4.1f}: '.format(time.time() - self.Start))
fea = FemTools()
fea.reset_all()
frd_result_file = os.path.splitext(self.inp_file_name)[0] + '.frd'
if os.path.isfile(frd_result_file):
QApplication.setOverrideCursor(Qt.WaitCursor)
ccxFrdReader.importFrd(frd_result_file, FemGui.getActiveAnalysis())
QApplication.restoreOverrideCursor()
self.femConsoleMessage("Loading results done!", "#00AA00")
else:
self.femConsoleMessage("Loading results failed! Results file doesn\'t exist", "#FF0000")
self.form.l_time.setText('Time: {0:4.1f}: '.format(time.time() - self.Start))
class _CommandQuickAnalysis(FemCommands):
def __init__(self):
super(_CommandQuickAnalysis, self).__init__()
self.resources = {'Pixmap': 'fem-quick-analysis',
'MenuText': QtCore.QT_TRANSLATE_NOOP("Fem_Quick_Analysis", "Run CalculiX ccx"),
'Accel': "R, C",
'ToolTip': QtCore.QT_TRANSLATE_NOOP("Fem_Quick_Analysis", "Write .inp file and run CalculiX ccx")}
self.is_active = 'with_solver'
def Activated(self):
def load_results(ret_code):
if ret_code == 0:
self.fea.load_results()
self.show_results_on_mesh()
self.hide_parts_constraints_show_meshes()
else:
print ("CalculiX failed ccx finished with error {}".format(ret_code))
self.fea = FemTools()
self.fea.reset_all()
message = self.fea.check_prerequisites()
if message:
QtGui.QMessageBox.critical(None, "Missing prerequisite", message)
return
self.fea.finished.connect(load_results)
QtCore.QThreadPool.globalInstance().start(self.fea)
def show_results_on_mesh(self):
#FIXME proprer mesh refreshing as per FreeCAD.FEM_dialog settings required
# or confirmation that it's safe to call restore_result_dialog
import _TaskPanelResultControl
tp = _TaskPanelResultControl._TaskPanelResultControl()
tp.restore_result_dialog()
class _CommandQuickAnalysis(FemCommands):
def __init__(self):
super(_CommandQuickAnalysis, self).__init__()
self.resources = {
'Pixmap':
'fem-quick-analysis',
'MenuText':
QtCore.QT_TRANSLATE_NOOP("Fem_Quick_Analysis", "Run CalculiX ccx"),
'Accel':
"R, C",
'ToolTip':
QtCore.QT_TRANSLATE_NOOP("Fem_Quick_Analysis",
"Write .inp file and run CalculiX ccx")
}
self.is_active = 'with_solver'
def Activated(self):
def load_results(ret_code):
if ret_code == 0:
self.fea.load_results()
self.show_results_on_mesh()
self.hide_parts_constraints_show_meshes()
else:
print("CalculiX failed ccx finished with error {}".format(
ret_code))
self.fea = FemTools()
self.fea.reset_all()
message = self.fea.check_prerequisites()
if message:
QtGui.QMessageBox.critical(None, "Missing prerequisite", message)
return
self.fea.finished.connect(load_results)
QtCore.QThreadPool.globalInstance().start(self.fea)
def show_results_on_mesh(self):
#FIXME proprer mesh refreshing as per FreeCAD.FEM_dialog settings required
# or confirmation that it's safe to call restore_result_dialog
#FIXME if an analysis has multiple results (frequence) the first result object found is restored
import _TaskPanelResultControl
tp = _TaskPanelResultControl._TaskPanelResultControl()
tp.restore_result_dialog()
class _CommandQuickAnalysis:
def GetResources(self):
return {
'Pixmap':
'fem-quick-analysis',
'MenuText':
QtCore.QT_TRANSLATE_NOOP("Fem_Quick_Analysis", "Run CalculiX ccx"),
'Accel':
"R, C",
'ToolTip':
QtCore.QT_TRANSLATE_NOOP("Fem_Quick_Analysis",
"Write .inp file and run CalculiX ccx")
}
def Activated(self):
def load_results(ret_code):
if ret_code == 0:
self.fea.load_results()
self.show_results_on_mesh()
else:
print "CalculiX failed ccx finished with error {}".format(
ret_code)
self.fea = FemTools()
self.fea.reset_all()
message = self.fea.check_prerequisites()
if message:
QtGui.QMessageBox.critical(None, "Missing prerequisite", message)
return
self.fea.finished.connect(load_results)
QtCore.QThreadPool.globalInstance().start(self.fea)
def show_results_on_mesh(self):
#FIXME proprer mesh refreshing as per FreeCAD.FEM_dialog settings required
# or confirmation that it's safe to call restore_result_dialog
tp = _ResultControlTaskPanel()
tp.restore_result_dialog()
def IsActive(self):
return FreeCADGui.ActiveDocument is not None and FemGui.getActiveAnalysis(
) is not None
def calculixFinished(self, exitCode):
print ("calculixFinished() {}".format(exitCode))
print (self.Calculix.state())
# Restore previous cwd
QtCore.QDir.setCurrent(self.cwd)
self.printCalculiXstdout()
self.Timer.stop()
self.femConsoleMessage("CalculiX done!", "#00AA00")
self.form.pb_run_ccx.setText("Re-run CalculiX")
self.femConsoleMessage("Loading result sets...")
self.form.l_time.setText('Time: {0:4.1f}: '.format(time.time() - self.Start))
fea = FemTools()
fea.reset_all()
fea.inp_file_name = self.inp_file_name
QApplication.setOverrideCursor(Qt.WaitCursor)
fea.load_results()
QApplication.restoreOverrideCursor()
self.form.l_time.setText('Time: {0:4.1f}: '.format(time.time() - self.Start))
class _CommandFrequencyAnalysis:
def GetResources(self):
return {
'Pixmap':
'fem-frequency-analysis',
'MenuText':
QtCore.QT_TRANSLATE_NOOP(
"Fem_Frequency_Analysis",
"Run frequency analysis with CalculiX ccx"),
'Accel':
"R, F",
'ToolTip':
QtCore.QT_TRANSLATE_NOOP(
"Fem_Frequency_Analysis",
"Write .inp file and run frequency analysis with CalculiX ccx")
}
def Activated(self):
def load_results(ret_code):
if ret_code == 0:
self.fea.load_results()
else:
print "CalculiX failed ccx finished with error {}".format(
ret_code)
self.fea = FemTools()
self.fea.reset_all()
self.fea.set_analysis_type('frequency')
message = self.fea.check_prerequisites()
if message:
QtGui.QMessageBox.critical(None, "Missing prerequisite", message)
return
self.fea.finished.connect(load_results)
QtCore.QThreadPool.globalInstance().start(self.fea)
def IsActive(self):
return FreeCADGui.ActiveDocument is not None and FemGui.getActiveAnalysis(
) is not None
def Activated(self):
fea = FemTools()
fea.reset_all()
def Activated(self):
fea = FemTools()
fea.reset_all()
def Activated(self):
fea = FemTools()
fea.reset_all()
self.hide_meshes_show_parts_constraints()
