def openData(self):
try:
fileName = FlightPlanBaseDlg.openData(self)
if fileName == None:
return
doc = DataHelper.loadXmlDocFromFile(fileName)
dialogNodeList = doc.elementsByTagName(self.objectName())
if dialogNodeList.isEmpty():
raise UserWarning, "self file is not correct."
dialogElem = dialogNodeList.at(0).toElement()
trackNodeList = dialogElem.elementsByTagName("Track")
if trackNodeList.isEmpty():
return
elemTrack = trackNodeList.at(0).toElement()
elemStart = elemTrack.elementsByTagName("StartPoint").at(
0).toElement()
elemEnd = elemTrack.elementsByTagName("EndPoint").at(0).toElement()
x, y = DataHelper.getPointValueFromElem(elemStart)
self.parametersPanel.txtTrack.captureRadialTool.startPoint = Point3D(
x, y)
x, y = DataHelper.getPointValueFromElem(elemEnd)
self.parametersPanel.txtTrack.captureRadialTool.endPoint = Point3D(
x, y)
except BaseException as e:
QMessageBox.warning(self, "Error", e.message)
def getParameterList(self):
parameterList = []
parameterList.append(("general", "group"))
parameterList.append(("Runway", "group"))
DataHelper.pnlPositionParameter(self.parametersPanel.pnlTHR, parameterList)
parameterList.append(("Direction", "Plan : " + QString(str(self.parametersPanel.txtRwyDir.txtRadialPlan.Value))))
parameterList.append(("", "Geodetic : " + QString(str(self.parametersPanel.txtRwyDir.txtRadialGeodetic.Value))))
parameterList.append(("Code", self.parametersPanel.cmbRwyCode.SelectedItem))
if self.parametersPanel.cmbApproachType.SelectedIndex == 0:
parameterList.append(("Strip Width", str(self.parametersPanel.txtStripWidth.Value.Metres) + " m"))
parameterList.append(("Parameters", "group"))
parameterList.append(("Approach Type", self.parametersPanel.cmbApproachType.SelectedItem))
parameterList.append(("Descent Angle", QString(str(self.parametersPanel.txtDescAngle.Value.Degrees))))
parameterList.append(("Minimum Altitude(%s)"%self.parametersPanel.pnlOCAH.cmbMCAH.currentText(), self.parametersPanel.pnlOCAH.txtMCAH.text() + " ft"))
parameterList.append(("Construction Type", self.parametersPanel.cmbConstructionType.SelectedItem))
if self.parametersPanel.cmbApproachType.SelectedIndex == 0:
parameterList.append(("In-bound Track", "Plan : " + QString(str(self.parametersPanel.txtTrack.txtRadialPlan.Value))))
parameterList.append(("", "Geodetic : " + QString(str(self.parametersPanel.txtTrack.txtRadialGeodetic.Value))))
parameterList.append(("THR to FAF Distance", str(self.parametersPanel.txtThrFaf.Value.NauticalMiles) + " nm"))
c = self.obstaclesModel.rowCount()
parameterList.append(("Number of Checked Obstacles", str(c)))
return parameterList
def saveData(self):
fileName = FlightPlanBaseDlg.saveData(self)
if fileName == None:
return
doc = DataHelper.loadXmlDocFromFile(fileName)
dialogNodeList = doc.elementsByTagName(self.objectName())
if dialogNodeList.isEmpty():
raise UserWarning, "self file is not correct."
dialogElem = dialogNodeList.at(0).toElement()
elemTrack = doc.createElement("Track")
elemStart = doc.createElement("StartPoint")
elemX = doc.createElement("X")
elemX.appendChild(doc.createTextNode(str(self.parametersPanel.txtTrack.captureRadialTool.startPoint.x())))
elemY = doc.createElement("Y")
elemY.appendChild(doc.createTextNode(str(self.parametersPanel.txtTrack.captureRadialTool.startPoint.y())))
elemStart.appendChild(elemX)
elemStart.appendChild(elemY)
elemTrack.appendChild(elemStart)
elemEnd = doc.createElement("EndPoint")
elemX = doc.createElement("X")
elemX.appendChild(doc.createTextNode(str(self.parametersPanel.txtTrack.captureRadialTool.endPoint.x())))
elemY = doc.createElement("Y")
elemY.appendChild(doc.createTextNode(str(self.parametersPanel.txtTrack.captureRadialTool.endPoint.y())))
elemEnd.appendChild(elemX)
elemEnd.appendChild(elemY)
elemTrack.appendChild(elemEnd)
dialogElem.appendChild(elemTrack)
DataHelper.saveXmlDocToFile(fileName, doc)
def exportResult(self):
result, resultHideColumnNames = FlightPlanBaseDlg.exportResult(self)
if not result:
return
filePathDir = QFileDialog.getSaveFileName(
self, "Export Obstacle Data",
QCoreApplication.applicationDirPath(),
"ExportObstaclefiles(*.xml)")
if filePathDir == "":
return
if self.ui.cmbSegmentType.SelectedIndex != 0:
self.filterList = [
"", PinsSurfaceType.PinsSurfaceType_LevelOIS,
PinsSurfaceType.PinsSurfaceType_OCS
]
else:
self.filterList = ["", PinsSurfaceType.PinsSurfaceType_OIS]
# self.ui.btnExportResult.setEnabled(True)
parameterList = self.getParameterList()
DataHelper.saveExportResult(filePathDir,
"PinS Visual Segment for Departures",
self.ui.tblObstacles, self.filterList,
parameterList, resultHideColumnNames)
self.obstaclesModel.setFilterFixedString(
self.filterList[self.ui.cmbSurface.currentIndex()])
def openData(self):
try:
filePathDir = QFileDialog.getOpenFileName(self, "Open Input Data",QCoreApplication.applicationDirPath (),"Xml Files(*.xml)")
if filePathDir == "":
return
DataHelper.loadInputParameters(filePathDir, self)
return filePathDir
except UserWarning as e:
QMessageBox.warning(self, "Error", e.message)
def exportResult(self):
result, resultHideColumnNames = FlightPlanBaseDlg.exportResult(self)
if not result:
return
filePathDir = QFileDialog.getSaveFileName(self, "Export Obstacle Data", QCoreApplication.applicationDirPath (),"ExportObstaclefiles(*.xml)")
if filePathDir == "":
return
parameterList = self.getParameterList()
DataHelper.saveExportResult(filePathDir, self.surfaceType, self.ui.tblObstacles, None, parameterList, resultHideColumnNames)
def exportResult(self):
result, resultHideColumnNames = FlightPlanBaseDlg.exportResult(self)
if not result:
return
filePathDir = QFileDialog.getSaveFileName(self, "Export Obstacle Data", QCoreApplication.applicationDirPath (),"ExportObstaclefiles(*.xml)")
if filePathDir == "":
return
# self.ui.btnExportResult.setEnabled(True)
parameterList = self.getParameterList()
DataHelper.saveExportResult(filePathDir, "PinS Visual Segment for Approaches", self.ui.tblObstacles, None, parameterList, resultHideColumnNames)
def exportResult(self):
filePathDir = QFileDialog.getSaveFileName(
self, "Export Obstacle Data",
QCoreApplication.applicationDirPath(),
"ExportObstaclefiles(*.xml)")
if filePathDir == "":
return
# self.filterList = []
# for taaArea in self.taaCalculationAreas:
# self.filterList.append(taaArea.title)
parameterList = self.getParameterList()
DataHelper.saveExportResult(filePathDir, SurfaceTypes.HoldingRnp,
self.ui.tblObstacles, None, parameterList)
# self.obstaclesModel.setFilterFixedString(self.filterList[self.ui.cmbObstSurface.currentIndex()])
return FlightPlanBaseDlg.exportResult(self)
def openData(self):
try:
filePathDir = QFileDialog.getOpenFileName(self, "Open Input Data",QCoreApplication.applicationDirPath (),"Xml Files(*.xml)")
if filePathDir == "":
return
layers = define._canvas.layers()
if layers != None and len(layers) > 0:
for layer in layers:
if layer.name() == "Symbols":
self.currentLayer = layer
try:
self.initAerodromeAndRwyCmb()
except:
pass
try:
self.initBasedOnCmb()
except:
pass
break
# contents = None
# with open(filePathDir, 'rb', 0) as tempFile:
# contents = tempFile.read()
# tempFile.close()
# bytes = FasDataBlockFile.CRC_Calculation(contents)
#
# string_0 = QString(filePathDir)
# crcFileDir = string_0.left(string_0.length() - 3) + "crc"
# crcFileContents = None
# with open(crcFileDir, 'rb', 0) as tempFileCrc:
# crcFileContents = tempFileCrc.read()
# tempFileCrc.close()
# if bytes != crcFileContents:
# QMessageBox.warning(self, "Error", "Input file has been changed by outside.")
# return
DataHelper.loadInputParameters(filePathDir, self)
return filePathDir
except UserWarning as e:
QMessageBox.warning(self, "Error", e.message)
def exportResult(self):
result, resultHideColumnNames = FlightPlanBaseDlg.exportResult(self)
if not result:
return
filePathDir = QFileDialog.getSaveFileName(
self, "Export Obstacle Data",
QCoreApplication.applicationDirPath(),
"ExportObstaclefiles(*.xml)")
if filePathDir == "":
return
# self.filterList = []
# for taaArea in self.taaCalculationAreas:
# self.filterList.append(taaArea.title)
parameterList = self.getParameterList()
DataHelper.saveExportResult(filePathDir, SurfaceTypes.HoldingRnp,
self.ui.tblObstacles, None, parameterList,
resultHideColumnNames)
def saveData(self):
try:
filePathDir = QFileDialog.getSaveFileName(self, "Save Input Data",QCoreApplication.applicationDirPath (),"Xml Files(*.xml)")
if filePathDir == "":
return
DataHelper.saveInputParameters(filePathDir, self)
# contents = None
# with open(filePathDir, 'rb', 0) as tempFile:
# contents = tempFile.read()
# tempFile.flush()
# tempFile.close()
# bytes = FasDataBlockFile.CRC_Calculation(contents)
# string_0 = QString(filePathDir)
# path = string_0.left(string_0.length() - 3) + "crc"
# fileStream = open(path, 'wb')
# fileStream.write(bytes)
# fileStream.close()
return filePathDir
except UserWarning as e:
QMessageBox.warning(self, "Error", e.message)
def getParameterList(self):
parameterList = []
parameterList.append(("general", "group"))
parameterList.append(("Parameters", "group"))
parameterList.append(
("Visual Segment Type", self.ui.cmbSegmentType.SelectedItem))
parameterList.append(
("VSDG", str(self.ui.txtVSDG.Value.Percent) + " %"))
parameterList.append(
("Minimum(%s)" % self.pnlMCAH.cmbMCAH.currentText(),
self.pnlMCAH.txtMCAH.text() + " ft"))
parameterList.append(
("Construction Type", self.ui.cmbConstructionType.SelectedItem))
if self.ui.cmbSegmentType.SelectedIndex != 0:
parameterList.append(
("Departure Type", self.ui.cmbDepartureType.SelectedItem))
parameterList.append(
("Out-bound Take-off Surface Track",
"Plan : " + str(self.parametersPanel.txtTakeOffSurfaceTrack.
txtRadialPlan.Value) + define._degreeStr))
parameterList.append(
("", "Geodetic : " +
str(self.parametersPanel.txtTakeOffSurfaceTrack.
txtRadialGeodetic.Value) + define._degreeStr))
# parameterList.append(("Out-bound Take-off Surface Track", self.ui.txtTakeOffSurfaceTrack.Value + unicode(" °", "utf-8")))
if self.ui.chbRightTurnProhibited.isChecked():
parameterList.append(("Limitation", "Right turn prohibited"))
else:
parameterList.append(("Limitation", "Left turn prohibited"))
else:
parameterList.append(
("MOC", str(self.ui.txtMOC.Value.Metres) + " m"))
parameterList.append(("", str(self.ui.txtMOC.Value.Feet) + " ft"))
parameterList.append(("Initial Departure Fix (IDF)", "group"))
# parameterList.append(("X", self.pnlIDF.txtPointX.text()))
# parameterList.append(("Y", self.pnlIDF.txtPointY.text()))
DataHelper.pnlPositionParameter(self.pnlIDF, parameterList)
if self.ui.cmbSegmentType.SelectedIndex == 0:
parameterList.append(
("Track From",
"Plan : " + str(self.ui.txtTrackFrom.txtRadialPlan.Value) +
define._degreeStr))
parameterList.append(
("", "Geodetic : " +
str(self.ui.txtTrackFrom.txtRadialGeodetic.Value) +
define._degreeStr))
# parameterList.append(("Track From", self.ui.txtTrackFrom.Value + unicode(" °", "utf-8")))
parameterList.append(("Heliport", "group"))
DataHelper.pnlPositionParameter(self.pnlHRP, parameterList)
parameterList.append(
("Safety Area Length", str(self.ui.txtHSAL.Value.Metres) + " m"))
parameterList.append(
("Safety Area Width", str(self.ui.txtHSAW.Value.Metres) + " m"))
parameterList.append(("Results / Checked Obstacles", "group"))
parameterList.append(("Checked Obstacles", "group"))
for strFilter in self.filterList:
self.obstaclesModel.setFilterFixedString(strFilter)
c = self.obstaclesModel.rowCount()
parameterList.append(
("Number of Checked Obstacles(%s)" % strFilter, str(c)))
return parameterList