def method_36_Construct(self, bool_0):
polylines = []
point3d5 = self.parametersPanel.pnlWaypoint.Point3d
value = float(self.parametersPanel.txtTrack.Value)
value1 = float(self.parametersPanel.txtRnpValue.text())
speed = Speed(float(self.parametersPanel.txtIas.text()))
altitude = Altitude(float(self.parametersPanel.txtAltitude.text()),
AltitudeUnits.FT)
num1 = float(self.parametersPanel.txtIsa.text())
value2 = float(self.parametersPanel.txtTime.text())
speed1 = Speed(float(self.parametersPanel.pnlWind.speedBox.text()))
num = 15 if (altitude.Feet >= 24500) else 23
speed2 = Speed.smethod_0(speed, num1, altitude)
metresPerSecond = value2 * 60 * speed2.MetresPerSecond
num2 = math.pow(speed2.Knots + speed1.Knots, 2) / (
34313 * math.tan(Unit.ConvertDegToRad(num))) * 1852
num3 = value1 * 1852
num4 = num2 * (1 - math.sin(Unit.ConvertDegToRad(20))) / (
2 * math.cos(Unit.ConvertDegToRad(20)))
num5 = value1 * 1852 + 3704
if (num5 < 9260):
num5 = 9260
point3d4 = MathHelper.distanceBearingPoint(
point3d5, Unit.ConvertDegToRad(value + 90), num2 /
2) if (self.parametersPanel.cmbOrientation.currentText() !=
OrientationType.Left) else MathHelper.distanceBearingPoint(
point3d5, Unit.ConvertDegToRad(value - 90), num2 / 2)
point3d6 = MathHelper.distanceBearingPoint(point3d4,
Unit.ConvertDegToRad(value),
num4)
point3d7 = MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(value + 180), metresPerSecond)
num6 = num2 / 2 + 1.414 * num3
num7 = num2 / 2 + num3
point3d8 = MathHelper.distanceBearingPoint(point3d6,
Unit.ConvertDegToRad(value),
num6)
point3d9 = MathHelper.distanceBearingPoint(
point3d6,
Unit.ConvertDegToRad(value + 90) - math.acos(num7 / num6), num6)
point3d10 = MathHelper.distanceBearingPoint(
point3d7,
Unit.ConvertDegToRad(value + 90) + math.acos(num7 / num6), num6)
point3d11 = MathHelper.distanceBearingPoint(
point3d7, Unit.ConvertDegToRad(value + 180), num6)
point3d12 = MathHelper.distanceBearingPoint(
point3d7,
Unit.ConvertDegToRad(value - 90) - math.acos(num7 / num6), num6)
point3d13 = MathHelper.distanceBearingPoint(
point3d6,
Unit.ConvertDegToRad(value - 90) + math.acos(num7 / num6), num6)
point3d = MathHelper.getIntersectionPoint(
point3d9,
MathHelper.distanceBearingPoint(
point3d9,
MathHelper.getBearing(point3d6, point3d9) -
Unit.ConvertDegToRad(90), 100), point3d8,
MathHelper.distanceBearingPoint(point3d8,
Unit.ConvertDegToRad(value + 90),
100))
point3d1 = MathHelper.getIntersectionPoint(
point3d10,
MathHelper.distanceBearingPoint(
point3d10,
MathHelper.getBearing(point3d7, point3d10) +
Unit.ConvertDegToRad(90), 100), point3d11,
MathHelper.distanceBearingPoint(point3d11,
Unit.ConvertDegToRad(value + 90),
100))
point3d2 = MathHelper.getIntersectionPoint(
point3d12,
MathHelper.distanceBearingPoint(
point3d12,
MathHelper.getBearing(point3d7, point3d12) -
Unit.ConvertDegToRad(90), 100), point3d11,
MathHelper.distanceBearingPoint(point3d11,
Unit.ConvertDegToRad(value - 90),
100))
point3d3 = MathHelper.getIntersectionPoint(
point3d13,
MathHelper.distanceBearingPoint(
point3d13,
MathHelper.getBearing(point3d6, point3d13) +
Unit.ConvertDegToRad(90), 100), point3d8,
MathHelper.distanceBearingPoint(point3d8,
Unit.ConvertDegToRad(value - 90),
100))
polylines1 = []
polylineArea = None
if (bool_0):
num8 = num2 / 2
point3d14 = MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(value + 90), num8)
point3d15 = MathHelper.distanceBearingPoint(
point3d7, Unit.ConvertDegToRad(value + 90), num8)
point3d16 = MathHelper.distanceBearingPoint(
point3d7, Unit.ConvertDegToRad(value - 90), num8)
point3d17 = MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(value - 90), num8)
point3dArray = [point3d14, point3d15, point3d16, point3d17]
polylineArea = PolylineArea(point3dArray)
polylineArea.method_19(
1, -1
) #MathHelper.smethod_57(TurnDirection.Right, point3d15, point3d16, point3d7))
polylineArea.method_19(
3, -1
) #MathHelper.smethod_57(TurnDirection.Right, point3d17, point3d14, point3d4))
polylines1.append(polylineArea)
point3dArray1 = [point3d9, point3d10, point3d12, point3d13]
polylineArea1 = PolylineArea(point3dArray1)
# for point3d0 in point3dArray1:
# polyline1.Add(point3d0)
polylineArea1.method_19(
1,
MathHelper.smethod_57(TurnDirection.Right, point3d10, point3d12,
point3d7))
polylineArea1.method_19(
3,
MathHelper.smethod_57(TurnDirection.Right, point3d13, point3d9,
point3d6))
# polylineArea1.set_closed(True)
# polyline1.SetDatabaseDefaults();
polylines1.append(polylineArea1)
polylineAreaLineList = [
PolylineArea(
[polylineArea1[0].Position, polylineArea1[1].Position]),
PolylineArea(
[polylineArea1[2].Position, polylineArea1[3].Position])
]
polylineAreaArc0 = PolylineArea()
polylineAreaArc0.Add(polylineArea1[1])
polylineAreaArc0.Add(PolylineAreaPoint(polylineArea1[2].Position))
polylineAreaArc1 = PolylineArea()
polylineAreaArc1.Add(polylineArea1[3])
polylineAreaArc1.Add(PolylineAreaPoint(polylineArea1[0].Position))
polylineAreaArcList = [polylineAreaArc0, polylineAreaArc1]
num9 = num5 / 5
polylineAreaArcListResult = []
polylineAreaLineListResult = []
for i in range(1, 6):
polylineAreaL0 = polylineAreaLineList[0].getOffsetCurveNo(
num9 * i, 4)
polylineAreaLineListResult.append(polylineAreaL0)
polylineAreaA0 = polylineAreaArcList[0].getOffsetCurveNo(
num9 * i, 4)
polylineAreaT = PolylineArea()
polylineAreaT.Add(
PolylineAreaPoint(
polylineAreaA0[0].Position,
MathHelper.smethod_60(
polylineAreaA0[0].Position,
polylineAreaA0[int(len(polylineAreaA0) / 2)].Position,
polylineAreaA0[len(polylineAreaA0) - 1].Position)))
polylineAreaT.Add(
PolylineAreaPoint(polylineAreaA0[len(polylineAreaA0) -
1].Position))
polylineAreaArcListResult.append(polylineAreaT)
polylineAreaL1 = polylineAreaLineList[1].getOffsetCurveNo(
num9 * i, 4)
polylineAreaLineListResult.append(polylineAreaL1)
polylineAreaA1 = polylineAreaArcList[1].getOffsetCurveNo(
num9 * i, 4)
polylineAreaT = PolylineArea()
polylineAreaT.Add(
PolylineAreaPoint(
polylineAreaA1[0].Position,
MathHelper.smethod_60(
polylineAreaA1[0].Position,
polylineAreaA1[int(len(polylineAreaA1) / 2)].Position,
polylineAreaA1[len(polylineAreaA1) - 1].Position)))
polylineAreaT.Add(
PolylineAreaPoint(polylineAreaA1[len(polylineAreaA1) -
1].Position))
polylineAreaArcListResult.append(polylineAreaT)
polylineAreaLineListResult.append(
PolylineArea([
polylineAreaL0[len(polylineAreaL0) - 1].Position,
polylineAreaA0[0].Position
]))
polylineAreaLineListResult.append(
PolylineArea([
polylineAreaA0[len(polylineAreaA0) - 1].Position,
polylineAreaL1[0].Position
]))
polylineAreaLineListResult.append(
PolylineArea([
polylineAreaL1[len(polylineAreaL1) - 1].Position,
polylineAreaA1[0].Position
]))
polylineAreaLineListResult.append(
PolylineArea([
polylineAreaA1[len(polylineAreaA1) - 1].Position,
polylineAreaL0[0].Position
]))
return polylineAreaLineListResult, polylineAreaArcListResult, polylineArea
def method_36(self, bool_0):
# Point3d point3d;
# Point3d point3d1;
# Point3d point3d2;
# Point3d point3d3;
# Point3d point3d4;
# double num;
polylines = []
point3d5 = self.parametersPanel.pnlWaypoint.Point3d
value = float(self.parametersPanel.txtTrack.text())
value1 = float(self.parametersPanel.txtRnpValue.text())
speed = Speed(float(self.parametersPanel.txtIas.text()))
altitude = Altitude(float(self.parametersPanel.txtAltitude.text()),
AltitudeUnits.FT)
num1 = float(self.parametersPanel.txtIsa.text())
value2 = float(self.parametersPanel.txtTime.text())
speed1 = Speed(float(self.parametersPanel.pnlWind.speedBox.text()))
num = 15 if (altitude.Feet >= 24500) else 23
speed2 = Speed.smethod_0(speed, num1, altitude)
metresPerSecond = value2 * 60 * speed2.MetresPerSecond
num2 = math.pow(speed2.Knots + speed1.Knots, 2) / (
34313 * math.tan(Unit.ConvertDegToRad(num))) * 1852
num3 = value1 * 1852
num4 = num2 * (1 - math.sin(Unit.ConvertDegToRad(20))) / (
2 * math.cos(Unit.ConvertDegToRad(20)))
num5 = value1 * 1852 + 3704
if (num5 < 9260):
num5 = 9260
point3d4 = MathHelper.distanceBearingPoint(
point3d5, Unit.ConvertDegToRad(value + 90), num2 /
2) if (self.parametersPanel.cmbOrientation.currentText() !=
OrientationType.Left) else MathHelper.distanceBearingPoint(
point3d5, Unit.ConvertDegToRad(value - 90), num2 / 2)
point3d6 = MathHelper.distanceBearingPoint(point3d4,
Unit.ConvertDegToRad(value),
num4)
point3d7 = MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(value + 180), metresPerSecond)
num6 = num2 / 2 + 1.414 * num3
num7 = num2 / 2 + num3
point3d8 = MathHelper.distanceBearingPoint(point3d6,
Unit.ConvertDegToRad(value),
num6)
point3d9 = MathHelper.distanceBearingPoint(
point3d6,
Unit.ConvertDegToRad(value + 90) - math.acos(num7 / num6), num6)
point3d10 = MathHelper.distanceBearingPoint(
point3d7,
Unit.ConvertDegToRad(value + 90) + math.acos(num7 / num6), num6)
point3d11 = MathHelper.distanceBearingPoint(
point3d7, Unit.ConvertDegToRad(value + 180), num6)
point3d12 = MathHelper.distanceBearingPoint(
point3d7,
Unit.ConvertDegToRad(value - 90) - math.acos(num7 / num6), num6)
point3d13 = MathHelper.distanceBearingPoint(
point3d6,
Unit.ConvertDegToRad(value - 90) + math.acos(num7 / num6), num6)
point3d = MathHelper.getIntersectionPoint(
point3d9,
MathHelper.distanceBearingPoint(
point3d9,
MathHelper.getBearing(point3d6, point3d9) -
Unit.ConvertDegToRad(90), 100), point3d8,
MathHelper.distanceBearingPoint(point3d8,
Unit.ConvertDegToRad(value + 90),
100))
point3d1 = MathHelper.getIntersectionPoint(
point3d10,
MathHelper.distanceBearingPoint(
point3d10,
MathHelper.getBearing(point3d7, point3d10) +
Unit.ConvertDegToRad(90), 100), point3d11,
MathHelper.distanceBearingPoint(point3d11,
Unit.ConvertDegToRad(value + 90),
100))
point3d2 = MathHelper.getIntersectionPoint(
point3d12,
MathHelper.distanceBearingPoint(
point3d12,
MathHelper.getBearing(point3d7, point3d12) -
Unit.ConvertDegToRad(90), 100), point3d11,
MathHelper.distanceBearingPoint(point3d11,
Unit.ConvertDegToRad(value - 90),
100))
point3d3 = MathHelper.getIntersectionPoint(
point3d13,
MathHelper.distanceBearingPoint(
point3d13,
MathHelper.getBearing(point3d6, point3d13) +
Unit.ConvertDegToRad(90), 100), point3d8,
MathHelper.distanceBearingPoint(point3d8,
Unit.ConvertDegToRad(value - 90),
100))
polylines1 = []
if (bool_0):
num8 = num2 / 2
point3d14 = MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(value + 90), num8)
point3d15 = MathHelper.distanceBearingPoint(
point3d7, Unit.ConvertDegToRad(value + 90), num8)
point3d16 = MathHelper.distanceBearingPoint(
point3d7, Unit.ConvertDegToRad(value - 90), num8)
point3d17 = MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(value - 90), num8)
point3dArray = [point3d14, point3d15, point3d16, point3d17]
polylineArea = PolylineArea(point3dArray)
# for point3d0 in point3dArray:
# polyline.Add(point3d0)
polylineArea.method_19(
1,
MathHelper.smethod_57(TurnDirection.Right, point3d15,
point3d16, point3d7))
polylineArea.method_19(
3,
MathHelper.smethod_57(TurnDirection.Right, point3d17,
point3d14, point3d4))
# polyline.set_closed(True)
# polyline.SetDatabaseDefaults()
polylines1.append(polylineArea)
point3dArray1 = [point3d9, point3d10, point3d12, point3d13]
polylineArea1 = PolylineArea(point3dArray1)
# for point3d0 in point3dArray1:
# polyline1.Add(point3d0)
polylineArea1.method_19(
1,
MathHelper.smethod_57(TurnDirection.Right, point3d10, point3d12,
point3d7))
polylineArea1.method_19(
3,
MathHelper.smethod_57(TurnDirection.Right, point3d13, point3d9,
point3d6))
# polylineArea1.set_closed(True)
# polyline1.SetDatabaseDefaults();
polylines1.append(polylineArea1)
num9 = num5 / 5
for i in range(1, 6):
polylineArea0 = polylineArea1.getOffsetCurve(num9 * i)
polylines1.append(polylineArea0)
# try:
# OffsetGapType offsetType = AcadHelper.OffsetType;
# try
# {
# AcadHelper.OffsetType = OffsetGapType.Extend;
# num9 = num5 / 5
# for i in range(4):
# n = i + 1
# point3dCollection = polyline1.GetOffsetCurves(5)
# polyline0 = Polyline()
# for point3d0 in point3dCollection:
# polyline0.Add(point3d0)
# polylines1.append(polyline0)
# polylines = polylines1
# }
# finally
# {
# AcadHelper.OffsetType = offsetType;
# }
# }
# catch
# {
# foreach (Polyline polyline2 in polylines1)
# {
# if (polyline2 == null)
# {
# continue;
# }
# polyline2.Dispose();
# }
# throw;
# }
return polylines1