def loadConf(self):
if globals.GApp.systconf.has_key('general'):
self.conf = globals.GApp.systconf['general']
else:
self.conf = systemGeneralConf()
curr_lang_code = self.conf.lang
# Set the languages comboBox the the right value.
idx = 0
for i in self.langs:
if i[0] == curr_lang_code:
self.langsBox.setCurrentIndex(idx)
idx += 1
# Slow start when starting every devices
self.slowStartAll.setValue(self.conf.slow_start)
# Autosave
self.autoSave.setValue(self.conf.autosave)
# Set default terminal command
if self.conf.term_cmd == '':
self.conf.term_cmd = TERMINAL_DEFAULT_CMD
# Set default terminal command
if self.conf.term_serial_cmd == '':
self.conf.term_serial_cmd = TERMINAL_SERIAL_DEFAULT_CMD
# Set default project dir
if self.conf.project_path == '':
self.conf.project_path = PROJECT_DEFAULT_DIR
# Set default IOS image dir
if self.conf.ios_path == '':
self.conf.ios_path = IOS_DEFAULT_DIR
self.lineEditTermCommand.setText(self.conf.term_cmd)
self.lineEditTermCommandVBoxConsole.setText(self.conf.term_serial_cmd)
self.ProjectPath.setText(os.path.normpath(self.conf.project_path))
self.IOSPath.setText(os.path.normpath(self.conf.ios_path))
# GUI settings
self.workspaceWidth.setValue(self.conf.scene_width)
self.workspaceHeight.setValue(self.conf.scene_height)
if self.conf.status_points == True:
self.checkBoxShowStatusPoints.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxShowStatusPoints.setCheckState(QtCore.Qt.Unchecked)
if self.conf.manual_connection == True:
self.checkBoxManualConnections.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxManualConnections.setCheckState(QtCore.Qt.Unchecked)
if self.conf.use_shell == True:
self.checkBoxUseShell.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxUseShell.setCheckState(QtCore.Qt.Unchecked)
if self.conf.bring_console_to_front == True:
self.checkBoxBringConsoleToFront.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxBringConsoleToFront.setCheckState(QtCore.Qt.Unchecked)
if self.conf.project_startup == True:
self.checkBoxProjectDialog.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxProjectDialog.setCheckState(QtCore.Qt.Unchecked)
if self.conf.draw_selected_rectangle == True:
self.checkBoxDrawRectangle.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxDrawRectangle.setCheckState(QtCore.Qt.Unchecked)
if self.conf.term_close_on_delete == True:
self.checkBoxCloseTermPrograms.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxCloseTermPrograms.setCheckState(QtCore.Qt.Unchecked)
if self.conf.relative_paths == True:
self.checkBoxRelativePaths.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxRelativePaths.setCheckState(QtCore.Qt.Unchecked)
if self.conf.auto_screenshot == True:
self.checkBoxAutoScreenshot.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxAutoScreenshot.setCheckState(QtCore.Qt.Unchecked)
if self.conf.auto_check_for_update == True:
self.checkBoxCheckForUpdate.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxCheckForUpdate.setCheckState(QtCore.Qt.Unchecked)
self.labelConfigurationPath.setText(
os.path.normpath(unicode(ConfDB().fileName())))
# Delay between console starts
self.doubleSpinBoxConsoleDelay.setValue(self.conf.console_delay)
def loadConf(self):
if globals.GApp.systconf.has_key('general'):
self.conf = globals.GApp.systconf['general']
else:
self.conf = systemGeneralConf()
curr_lang_code = self.conf.lang
# Set the languages comboBox the the right value.
idx = 0
for i in self.langs:
if i[0] == curr_lang_code:
self.langsBox.setCurrentIndex(idx)
idx += 1
# Slow start when starting every devices
self.slowStartAll.setValue(self.conf.slow_start)
# Autosave
self.autoSave.setValue(self.conf.autosave)
# Defaults terminal command
if self.conf.term_cmd == '':
if sys.platform.startswith('darwin'):
self.conf.term_cmd = unicode("/usr/bin/osascript -e 'tell application \"terminal\" to do script with command \"telnet %h %p ; exit\"'")
elif sys.platform.startswith('win'):
self.conf.term_cmd = unicode('putty.exe -telnet %h %p')
self.conf.use_shell = False
else:
self.conf.term_cmd = unicode("xterm -T %d -e 'telnet %h %p' >/dev/null 2>&1 &")
if self.conf.project_path == '':
if os.environ.has_key("TEMP"):
self.conf.project_path = unicode(os.environ["TEMP"], errors='replace')
elif os.environ.has_key("TMP"):
self.conf.project_path = unicode(os.environ["TMP"], errors='replace')
else:
self.conf.project_path = unicode('/tmp', errors='replace')
if self.conf.ios_path == '':
if os.environ.has_key("TEMP"):
self.conf.ios_path = unicode(os.environ["TEMP"], errors='replace')
elif os.environ.has_key("TMP"):
self.conf.ios_path = unicode(os.environ["TMP"], errors='replace')
else:
self.conf.ios_path = unicode('/tmp', errors='replace')
self.lineEditTermCommand.setText(self.conf.term_cmd)
self.ProjectPath.setText(os.path.normpath(self.conf.project_path))
self.IOSPath.setText(os.path.normpath(self.conf.ios_path))
# GUI settings
self.workspaceWidth.setValue(self.conf.scene_width)
self.workspaceHeight.setValue(self.conf.scene_height)
if self.conf.status_points == True:
self.checkBoxShowStatusPoints.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxShowStatusPoints.setCheckState(QtCore.Qt.Unchecked)
if self.conf.manual_connection == True:
self.checkBoxManualConnections.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxManualConnections.setCheckState(QtCore.Qt.Unchecked)
if self.conf.use_shell == True:
self.checkBoxUseShell.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxUseShell.setCheckState(QtCore.Qt.Unchecked)
if self.conf.project_startup == True:
self.checkBoxProjectDialog.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxProjectDialog.setCheckState(QtCore.Qt.Unchecked)
if self.conf.draw_selected_rectangle == True:
self.checkBoxDrawRectangle.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxDrawRectangle.setCheckState(QtCore.Qt.Unchecked)
if self.conf.relative_paths == True:
self.checkBoxRelativePaths.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxRelativePaths.setCheckState(QtCore.Qt.Unchecked)
self.labelConfigurationPath.setText(os.path.normpath(unicode(ConfDB().fileName())))
def loadConf(self):
if globals.GApp.systconf.has_key("general"):
self.conf = globals.GApp.systconf["general"]
else:
self.conf = systemGeneralConf()
curr_lang_code = self.conf.lang
# Set the languages comboBox the the right value.
idx = 0
for i in self.langs:
if i[0] == curr_lang_code:
self.langsBox.setCurrentIndex(idx)
idx += 1
# Slow start when starting every devices
self.slowStartAll.setValue(self.conf.slow_start)
# Autosave
self.autoSave.setValue(self.conf.autosave)
# Set default terminal command
if self.conf.term_cmd == "":
self.conf.term_cmd = TERMINAL_DEFAULT_CMD
# Set default terminal command
if self.conf.term_serial_cmd == "":
self.conf.term_serial_cmd = TERMINAL_SERIAL_DEFAULT_CMD
# Set default project dir
if self.conf.project_path == "":
self.conf.project_path = PROJECT_DEFAULT_DIR
# Set default IOS image dir
if self.conf.ios_path == "":
self.conf.ios_path = IOS_DEFAULT_DIR
self.lineEditTermCommand.setText(self.conf.term_cmd)
self.lineEditTermCommandVBoxConsole.setText(self.conf.term_serial_cmd)
self.ProjectPath.setText(os.path.normpath(self.conf.project_path))
self.IOSPath.setText(os.path.normpath(self.conf.ios_path))
# GUI settings
self.workspaceWidth.setValue(self.conf.scene_width)
self.workspaceHeight.setValue(self.conf.scene_height)
if self.conf.status_points == True:
self.checkBoxShowStatusPoints.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxShowStatusPoints.setCheckState(QtCore.Qt.Unchecked)
if self.conf.manual_connection == True:
self.checkBoxManualConnections.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxManualConnections.setCheckState(QtCore.Qt.Unchecked)
if self.conf.use_shell == True:
self.checkBoxUseShell.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxUseShell.setCheckState(QtCore.Qt.Unchecked)
if self.conf.bring_console_to_front == True:
self.checkBoxBringConsoleToFront.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxBringConsoleToFront.setCheckState(QtCore.Qt.Unchecked)
if self.conf.project_startup == True:
self.checkBoxProjectDialog.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxProjectDialog.setCheckState(QtCore.Qt.Unchecked)
if self.conf.draw_selected_rectangle == True:
self.checkBoxDrawRectangle.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxDrawRectangle.setCheckState(QtCore.Qt.Unchecked)
if self.conf.term_close_on_delete == True:
self.checkBoxCloseTermPrograms.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxCloseTermPrograms.setCheckState(QtCore.Qt.Unchecked)
if self.conf.relative_paths == True:
self.checkBoxRelativePaths.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxRelativePaths.setCheckState(QtCore.Qt.Unchecked)
if self.conf.auto_screenshot == True:
self.checkBoxAutoScreenshot.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxAutoScreenshot.setCheckState(QtCore.Qt.Unchecked)
if self.conf.auto_check_for_update == True:
self.checkBoxCheckForUpdate.setCheckState(QtCore.Qt.Checked)
else:
self.checkBoxCheckForUpdate.setCheckState(QtCore.Qt.Unchecked)
self.labelConfigurationPath.setText(os.path.normpath(unicode(ConfDB().fileName())))
# Delay between console starts
self.doubleSpinBoxConsoleDelay.setValue(self.conf.console_delay)
def run(self, file):
self._file = file
# Display splash screen while waiting for the application to open
self.processSplashScreen()
# Instantiation of Dynagen
self.__dynagen = DynagenSub()
self.systconf['dynamips'] = systemDynamipsConf()
confo = self.systconf['dynamips']
confo.path = ConfDB().get('Dynamips/hypervisor_path', Defaults.DYNAMIPS_DEFAULT_PATH)
confo.port = int(ConfDB().get('Dynamips/hypervisor_port', 7200))
confo.baseUDP = int(ConfDB().get('Dynamips/hypervisor_baseUDP', 10001))
confo.baseConsole = int(ConfDB().get('Dynamips/hypervisor_baseConsole', 2101))
confo.baseAUX = int(ConfDB().get('Dynamips/hypervisor_baseAUX', 2501))
confo.workdir = ConfDB().get('Dynamips/hypervisor_working_directory', Defaults.DYNAMIPS_DEFAULT_WORKDIR)
confo.clean_workdir = ConfDB().value("Dynamips/clean_working_directory", QVariant(True)).toBool()
confo.ghosting = ConfDB().value("Dynamips/dynamips_ghosting", QVariant(True)).toBool()
confo.mmap = ConfDB().value("Dynamips/dynamips_mmap", QVariant(True)).toBool()
confo.sparsemem = ConfDB().value("Dynamips/dynamips_sparsemem", QVariant(True)).toBool()
confo.jitsharing = ConfDB().value("Dynamips/dynamips_jitsharing", QVariant(False)).toBool()
if sys.platform.startswith('win'):
confo.memory_limit = int(ConfDB().get("Dynamips/hypervisor_memory_usage_limit", 512))
else:
confo.memory_limit = int(ConfDB().get("Dynamips/hypervisor_memory_usage_limit", 1024))
confo.udp_incrementation = int(ConfDB().get("Dynamips/hypervisor_udp_incrementation", 100))
confo.detected_version = ConfDB().get('Dynamips/detected_version', unicode(''))
confo.import_use_HypervisorManager = ConfDB().value("Dynamips/hypervisor_manager_import", QVariant(True)).toBool()
confo.HypervisorManager_binding = ConfDB().get('Dynamips/hypervisor_manager_binding', unicode('127.0.0.1'))
confo.allocateHypervisorPerIOS = ConfDB().value("Dynamips/allocate_hypervisor_per_IOS", QVariant(True)).toBool()
# Expand user home dir and environment variables
confo.path = os.path.expandvars(os.path.expanduser(confo.path))
confo.workdir = os.path.expandvars(os.path.expanduser(confo.workdir))
# Qemu config
self.systconf['qemu'] = systemQemuConf()
confo = self.systconf['qemu']
confo.qemuwrapper_path = ConfDB().get('Qemu/qemuwrapper_path', Defaults.QEMUWRAPPER_DEFAULT_PATH)
confo.qemuwrapper_workdir = ConfDB().get('Qemu/qemuwrapper_working_directory', Defaults.QEMUWRAPPER_DEFAULT_WORKDIR)
confo.qemu_path = ConfDB().get('Qemu/qemu_path', Defaults.QEMU_DEFAULT_PATH)
confo.qemu_img_path = ConfDB().get('Qemu/qemu_img_path', Defaults.QEMU_IMG_DEFAULT_PATH)
confo.external_hosts = ConfDB().get('Qemu/external_hosts', unicode('127.0.0.1:10525')).split(',')
confo.enable_QemuWrapperAdvOptions = ConfDB().value("Qemu/enable_QemuWrapperAdvOptions", QVariant(False)).toBool()
confo.enable_QemuManager = ConfDB().value("Qemu/enable_QemuManager", QVariant(True)).toBool()
confo.import_use_QemuManager = ConfDB().value("Qemu/qemu_manager_import", QVariant(True)).toBool()
confo.send_path_external_QemuWrapper = ConfDB().value("Qemu/send_paths_external_Qemuwrapper", QVariant(False)).toBool()
confo.QemuManager_binding = ConfDB().get('Qemu/qemu_manager_binding', unicode('127.0.0.1'))
confo.qemuwrapper_port = int(ConfDB().get('Qemu/qemuwrapper_port', 10525))
confo.qemuwrapper_baseUDP = int(ConfDB().get('Qemu/qemuwrapper_baseUDP', 40000))
confo.qemuwrapper_baseConsole = int(ConfDB().get('Qemu/qemuwrapper_baseConsole', 3001))
# Expand user home dir and environment variables
confo.qemuwrapper_path = os.path.expandvars(os.path.expanduser(confo.qemuwrapper_path))
confo.qemuwrapper_workdir = os.path.expandvars(os.path.expanduser(confo.qemuwrapper_workdir))
# VBox config
self.systconf['vbox'] = systemVBoxConf()
confo = self.systconf['vbox']
confo.vboxwrapper_path = ConfDB().get('VBox/vboxwrapper_path', Defaults.VBOXWRAPPER_DEFAULT_PATH)
confo.vboxwrapper_workdir = ConfDB().get('VBox/vboxwrapper_working_directory', Defaults.VBOXWRAPPER_DEFAULT_WORKDIR)
confo.external_hosts = ConfDB().get('VBox/external_hosts', unicode('127.0.0.1:11525')).split(',')
confo.use_VBoxVmnames = ConfDB().value("VBox/use_VBoxVmnames", QVariant(True)).toBool()
confo.enable_VBoxWrapperAdvOptions = ConfDB().value("VBox/enable_VBoxWrapperAdvOptions", QVariant(False)).toBool()
confo.enable_VBoxAdvOptions = ConfDB().value("VBox/enable_VBoxAdvOptions", QVariant(False)).toBool()
confo.enable_GuestControl = ConfDB().value("VBox/enable_GuestControl", QVariant(False)).toBool()
confo.enable_VBoxManager = ConfDB().value("VBox/enable_VBoxManager", QVariant(True)).toBool()
confo.import_use_VBoxManager = ConfDB().value("VBox/vbox_manager_import", QVariant(True)).toBool()
confo.VBoxManager_binding = ConfDB().get('VBox/vbox_manager_binding', unicode('127.0.0.1'))
confo.vboxwrapper_port = int(ConfDB().get('VBox/vboxwrapper_port', 11525))
confo.vboxwrapper_baseUDP = int(ConfDB().get('VBox/vboxwrapper_baseUDP', 20900))
confo.vboxwrapper_baseConsole = int(ConfDB().get('VBox/vboxwrapper_baseConsole', 3501))
# Expand user home dir and environment variables
confo.vboxwrapper_path = os.path.expandvars(os.path.expanduser(confo.vboxwrapper_path))
confo.vboxwrapper_workdir = os.path.expandvars(os.path.expanduser(confo.vboxwrapper_workdir))
# Capture config
self.systconf['capture'] = systemCaptureConf()
confo = self.systconf['capture']
confo.workdir = ConfDB().get('Capture/working_directory', Defaults.CAPTURE_DEFAULT_WORKDIR)
confo.cap_cmd = ConfDB().get('Capture/capture_reader_cmd', Defaults.CAPTURE_DEFAULT_CMD)
confo.auto_start = ConfDB().value('Capture/auto_start_cmd', QVariant(False)).toBool()
# Expand user home dir and environment variables
confo.cap_cmd = os.path.expandvars(os.path.expanduser(confo.cap_cmd))
confo.workdir = os.path.expandvars(os.path.expanduser(confo.workdir))
# Deployement Wizard config
self.systconf['deployement wizard'] = systemDeployementWizardConf()
confo = self.systconf['deployement wizard']
confo.deployementwizard_path = ConfDB().get('DeployementWizard/deployementwizard_path', Defaults.DEPLOYEMENTWIZARD_DEFAULT_PATH)
confo.deployementwizard_filename = ConfDB().get('DeployementWizard/deployementwizard_filename', unicode('Topology.pdf'))
# Expand user home dir and environement variable
confo.deployementwizard_path = os.path.expandvars(os.path.expanduser(confo.deployementwizard_path))
confo.deployementwizard_filename = os.path.expandvars(os.path.expanduser(confo.deployementwizard_filename))
# System general config
self.systconf['general'] = systemGeneralConf()
confo = self.systconf['general']
confo.lang = ConfDB().get('GNS3/lang', unicode('en'))
confo.slow_start = int(ConfDB().get('GNS3/slow_start', 1))
confo.autosave = int(ConfDB().get('GNS3/autosave', 0))
confo.project_startup = ConfDB().value("GNS3/project_startup", QVariant(True)).toBool()
confo.relative_paths = ConfDB().value("GNS3/relative_paths", QVariant(True)).toBool()
confo.auto_screenshot = ConfDB().value("GNS3/auto_screenshot", QVariant(True)).toBool()
if sys.platform.startswith('win'):
confo.use_shell = ConfDB().value("GNS3/use_shell", QVariant(False)).toBool()
else:
confo.use_shell = ConfDB().value("GNS3/use_shell", QVariant(True)).toBool()
confo.bring_console_to_front = ConfDB().value("GNS3/bring_console_to_front", QVariant(False)).toBool()
confo.term_cmd = ConfDB().get('GNS3/console', Defaults.TERMINAL_DEFAULT_CMD)
confo.term_serial_cmd = ConfDB().get('GNS3/serial_console', Defaults.TERMINAL_SERIAL_DEFAULT_CMD)
confo.term_close_on_delete = ConfDB().value("GNS3/term_close_on_delete", QVariant(True)).toBool()
confo.project_path = ConfDB().get('GNS3/project_directory', Defaults.PROJECT_DEFAULT_DIR)
confo.ios_path = ConfDB().get('GNS3/ios_directory', Defaults.IOS_DEFAULT_DIR)
confo.status_points = ConfDB().value("GNS3/gui_show_status_points", QVariant(True)).toBool()
confo.manual_connection = ConfDB().value("GNS3/gui_use_manual_connection", QVariant(True)).toBool()
confo.draw_selected_rectangle = ConfDB().value("GNS3/gui_draw_selected_rectangle", QVariant(False)).toBool()
confo.scene_width = int(ConfDB().get('GNS3/scene_width', 2000))
confo.scene_height = int(ConfDB().get('GNS3/scene_height', 1000))
confo.console_delay = float(ConfDB().get('GNS3/console_delay', 1))
if sys.platform.startswith('win') or sys.platform.startswith('darwin'):
# by default auto check for update only on Windows or OSX
confo.auto_check_for_update = ConfDB().value("GNS3/auto_check_for_update", QVariant(True)).toBool()
else:
confo.auto_check_for_update = ConfDB().value("GNS3/auto_check_for_update", QVariant(False)).toBool()
confo.last_check_for_update = int(ConfDB().get('GNS3/last_check_for_update', 0))
# Expand user home dir and environment variables
confo.term_cmd = os.path.expandvars(os.path.expanduser(confo.term_cmd))
confo.project_path = os.path.expandvars(os.path.expanduser(confo.project_path))
confo.ios_path = os.path.expandvars(os.path.expanduser(confo.ios_path))
# Restore debug level
globals.debugLevel = int(ConfDB().get('GNS3/debug_level', 0))
if globals.debugLevel == 1 or globals.debugLevel == 3:
lib.setdebug(True)
tracker.setdebug(True)
# Now systGeneral settings are loaded, load the translator
self.translator = Translator()
self.translator.switchLangTo(self.systconf['general'].lang)
# HypervisorManager
if globals.GApp.systconf['dynamips'].path:
self.__HypervisorManager = HypervisorManager()
# QemuManager
self.__QemuManager = QemuManager()
# VBoxManager
self.__VBoxManager = VBoxManager()
GNS_Conf().VBOX_images()
GNS_Conf().IOS_images()
GNS_Conf().IOS_hypervisors()
GNS_Conf().QEMU_images()
GNS_Conf().PIX_images()
GNS_Conf().JUNOS_images()
GNS_Conf().ASA_images()
GNS_Conf().AWP_images()
GNS_Conf().IDS_images()
GNS_Conf().Libraries()
GNS_Conf().Symbols()
GNS_Conf().RecentFiles()
# Workspace create a ` Scene' object,
# so it also set self.__topology
self.__workspace = Workspace()
# seems strange to have mainWindow = Workspace, but actually,
# we don't use MDI style, so there not so much difference.
self.__mainWindow = self.__workspace
# In GNS3, the `scene' represent the widget where all graphical stuff
# are done (drawing Node, Animation), and in Qt, it's the QGraphicsView
# which handle all this stuff.
self.__scene = self.__mainWindow.graphicsView
# Restore the geometry & state of the GUI
self.mainWindow.restoreGeometry(ConfDB().value("GUIState/Geometry").toByteArray())
self.mainWindow.restoreState(ConfDB().value("GUIState/State").toByteArray())
self.mainWindow.action_DisableMouseWheel.setChecked(ConfDB().value("GUIState/DisableMouseWheel", QVariant(False)).toBool())
self.mainWindow.action_ZoomUsingMouseWheel.setChecked(ConfDB().value("GUIState/ZoomUsingMouseWheel", QVariant(False)).toBool())
if self.mainWindow.tips_dialog:
self.mainWindow.tips_dialog.checkBoxDontShowAgain.setChecked(ConfDB().value("GUIState/DoNotShowTipsDialog", QVariant(False)).toBool())
# load initial stuff once the event loop isn't busy
QtCore.QTimer.singleShot(0, self._startupLoading)
# By default, don't show the NodeTypes dock
self.mainWindow.dockWidget_NodeTypes.setVisible(False)
self.mainWindow.show()
retcode = QApplication.exec_()
self.__HypervisorManager = None
self.__QemuManager = None
self.__VBoxManager = None
if globals.recordConfiguration:
# Save the geometry & state of the GUI
ConfDB().set("GUIState/Geometry", self.mainWindow.saveGeometry())
ConfDB().set("GUIState/State", self.mainWindow.saveState())
ConfDB().set("GUIState/DisableMouseWheel", self.mainWindow.action_DisableMouseWheel.isChecked())
ConfDB().set("GUIState/ZoomUsingMouseWheel", self.mainWindow.action_ZoomUsingMouseWheel.isChecked())
if self.mainWindow.tips_dialog:
ConfDB().set("GUIState/DoNotShowTipsDialog", self.mainWindow.tips_dialog.checkBoxDontShowAgain.isChecked())
self.syncConf()
self.deleteLater()
sys.exit(retcode)
def run(self, file):
# Instantiation of Dynagen
self.__dynagen = DynagenSub()
self.systconf['dynamips'] = systemDynamipsConf()
confo = self.systconf['dynamips']
confo.path = ConfDB().get('Dynamips/hypervisor_path', unicode(''))
confo.port = int(ConfDB().get('Dynamips/hypervisor_port', 7200))
confo.baseUDP = int(ConfDB().get('Dynamips/hypervisor_baseUDP', 10000))
confo.baseConsole = int(ConfDB().get('Dynamips/hypervisor_baseConsole', 2000))
confo.baseAUX = int(ConfDB().get('Dynamips/hypervisor_baseAUX', 0))
confo.workdir = ConfDB().get('Dynamips/hypervisor_working_directory', unicode(''))
confo.clean_workdir = ConfDB().value("Dynamips/clean_working_directory", QVariant(True)).toBool()
confo.ghosting = ConfDB().value("Dynamips/dynamips_ghosting", QVariant(True)).toBool()
confo.mmap = ConfDB().value("Dynamips/dynamips_mmap", QVariant(True)).toBool()
confo.sparsemem = ConfDB().value("Dynamips/dynamips_sparsemem", QVariant(False)).toBool()
confo.jitsharing = ConfDB().value("Dynamips/dynamips_jitsharing", QVariant(False)).toBool()
if sys.platform.startswith('win'):
confo.memory_limit = int(ConfDB().get("Dynamips/hypervisor_memory_usage_limit", 512))
else:
confo.memory_limit = int(ConfDB().get("Dynamips/hypervisor_memory_usage_limit", 1024))
confo.udp_incrementation = int(ConfDB().get("Dynamips/hypervisor_udp_incrementation", 100))
confo.import_use_HypervisorManager = ConfDB().value("Dynamips/hypervisor_manager_import", QVariant(True)).toBool()
confo.HypervisorManager_binding = ConfDB().get('Dynamips/hypervisor_manager_binding', unicode('127.0.0.1'))
confo.allocateHypervisorPerIOS = ConfDB().value("Dynamips/allocate_hypervisor_per_IOS", QVariant(True)).toBool()
# replace ~user and $HOME by home directory
if os.environ.has_key("HOME"):
confo.path = confo.path.replace('$HOME', os.environ["HOME"])
confo.workdir = confo.workdir.replace('$HOME', os.environ["HOME"])
confo.path = os.path.expanduser(confo.path)
confo.workdir = os.path.expanduser(confo.workdir)
# Qemu config
self.systconf['qemu'] = systemQemuConf()
confo = self.systconf['qemu']
confo.qemuwrapper_path = ConfDB().get('Qemu/qemuwrapper_path', unicode(''))
confo.qemuwrapper_workdir = unicode(work_dir) #установка рабочей директории из myfile.py(вместо файла конфигурации)
confo.qemu_path = ConfDB().get('Qemu/qemu_path', unicode('qemu'))
confo.qemu_img_path = ConfDB().get('Qemu/qemu_img_path', unicode('qemu-img'))
confo.external_hosts = qemu_server.split(',') #установка IP адреса сервера из myfile.py
confo.enable_QemuManager = ConfDB().value("Qemu/enable_QemuManager", QVariant(True)).toBool()
confo.import_use_QemuManager = ConfDB().value("Qemu/qemu_manager_import", QVariant(True)).toBool()
confo.QemuManager_binding = ConfDB().get('Qemu/qemu_manager_binding', unicode('127.0.0.1'))
#установка порта соединения к Qemuwrapper из myfile.py
confo.qemuwrapper_port = qemu_port
#установка начального значения UDP порта для кокретного VLAN
confo.qemuwrapper_baseUDP = getConnectionPort(base_qemu_udp)
#установка начального окна VNC для кокретного VLAN
confo.qemuwrapper_baseConsole = getVideoPort(base_qemu_console)
# Capture config
self.systconf['capture'] = systemCaptureConf()
confo = self.systconf['capture']
confo.workdir = ConfDB().get('Capture/working_directory', unicode(''))
confo.cap_cmd = ConfDB().get('Capture/capture_reader_cmd', unicode(''))
confo.auto_start = ConfDB().value('Capture/auto_start_cmd', QVariant(True)).toBool()
# replace ~user and $HOME by home directory
if os.environ.has_key("HOME"):
confo.cap_cmd = confo.cap_cmd.replace('$HOME', os.environ["HOME"])
confo.workdir = confo.workdir.replace('$HOME', os.environ["HOME"])
confo.cap_cmd = os.path.expanduser(confo.cap_cmd)
confo.workdir = os.path.expanduser(confo.workdir)
# System general config
self.systconf['general'] = systemGeneralConf()
confo = self.systconf['general']
confo.lang = ConfDB().get('GNS3/lang', unicode('en'))
confo.slow_start = int(ConfDB().get('GNS3/slow_start', 0))
confo.autosave = int(ConfDB().get('GNS3/autosave', 0))
confo.project_startup = ConfDB().value("GNS3/project_startup", QVariant(True)).toBool()
confo.relative_paths = ConfDB().value("GNS3/relative_paths", QVariant(True)).toBool()
confo.use_shell = ConfDB().value("GNS3/use_shell", QVariant(True)).toBool()
confo.term_cmd = ConfDB().get('GNS3/console', unicode(''))
confo.project_path = ConfDB().get('GNS3/project_directory', unicode(''))
confo.ios_path = ConfDB().get('GNS3/ios_directory', unicode(''))
confo.status_points = ConfDB().value("GNS3/gui_show_status_points", QVariant(True)).toBool()
confo.manual_connection =ConfDB().value("GNS3/gui_use_manual_connection", QVariant(False)).toBool()
confo.draw_selected_rectangle = ConfDB().value("GNS3/gui_draw_selected_rectangle", QVariant(False)).toBool()
confo.scene_width = int(ConfDB().get('GNS3/scene_width', 2000))
confo.scene_height = int(ConfDB().get('GNS3/scene_height', 1000))
# replace ~user and $HOME by home directory
if os.environ.has_key("HOME"):
confo.term_cmd = confo.term_cmd.replace('$HOME', os.environ["HOME"])
confo.project_path = confo.project_path.replace('$HOME', os.environ["HOME"])
confo.ios_path = confo.ios_path.replace('$HOME', os.environ["HOME"])
confo.term_cmd = os.path.expanduser(confo.term_cmd)
confo.project_path = os.path.expanduser(confo.project_path)
confo.ios_path = os.path.expanduser(confo.ios_path)
# Now systGeneral settings are loaded, load the translator
self.translator = Translator()
self.translator.switchLangTo(self.systconf['general'].lang)
# HypervisorManager
if globals.GApp.systconf['dynamips'].path:
self.__HypervisorManager = HypervisorManager()
# QemuManager
self.__QemuManager = QemuManager()
GNS_Conf().IOS_images()
GNS_Conf().IOS_hypervisors()
GNS_Conf().QEMU_images()
GNS_Conf().PIX_images()
GNS_Conf().JUNOS_images()
GNS_Conf().ASA_images()
GNS_Conf().IDS_images()
GNS_Conf().Libraries()
GNS_Conf().Symbols()
# Workspace create a ` Scene' object,
# so it also set self.__topology
self.__workspace = Workspace()
# seems strange to have mainWindow = Workspace, but actually,
# we don't use MDI style, so there not so much difference.
self.__mainWindow = self.__workspace
# In GNS3, the `scene' represent the widget where all graphical stuff
# are done (drawing Node, Animation), and in Qt, it's the QGraphicsView
# which handle all this stuff.
self.__scene = self.__mainWindow.graphicsView
# Restore the geometry & state of the GUI
self.mainWindow.restoreGeometry(ConfDB().value("GUIState/Geometry").toByteArray())
self.mainWindow.restoreState(ConfDB().value("GUIState/State").toByteArray())
self.mainWindow.show()
configFile = unicode(ConfDB().fileName())
if not os.access(configFile, os.F_OK):
dialog = Wizard()
dialog.show()
dialog.raise_()
dialog.activateWindow()
if file:
self.mainWindow.loadNetfile(file)
#Закомментировано появление окна, предлагающего создать проект
#elif confo.project_startup and os.access(configFile, os.F_OK):
# dialog = ProjectDialog()
# dialog.show()
# self.mainWindow.centerDialog(dialog)
# dialog.raise_()
# dialog.activateWindow()
retcode = QApplication.exec_()
self.__HypervisorManager = None
self.__QemuManager = None
if globals.recordConfiguration:
# Save the geometry & state of the GUI
ConfDB().set("GUIState/Geometry", self.mainWindow.saveGeometry())
ConfDB().set("GUIState/State", self.mainWindow.saveState())
self.syncConf()
sys.exit(retcode)
