def __init__(self, device, *args, **kwargs):
super(LightDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("Light settings [{}]".format(
device.p['FriendlyName1']))
self.setMinimumWidth(300)
self.device = device
self.setoption_list = [68, 15, 16, 17, 20]
self.setoption_widgets = {}
vl = VLayout()
vl_so = VLayout(0, 0)
for so in self.setoption_list:
cw = Command("SetOption{}".format(so), setoptions[str(so)],
self.device.setoption(so))
vl_so.addWidget(cw)
self.setoption_widgets[so] = cw
tabs = QTabWidget()
tab_so = QWidget()
tab_so.setLayout(vl_so)
tabs.addTab(tab_so, "SetOptions")
vl.addWidget(tabs)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
self.setLayout(vl)
def __init__(self, device, *args, **kwargs):
super(SwitchesDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("Switches settings [{}]".format(
device.p['FriendlyName1']))
self.setMinimumWidth(300)
self.device = device
self.commands_list = ["SwitchDebounce", "SwitchRetain"]
self.command_widgets = {}
self.setoption_list = [32]
self.setoption_widgets = {}
vl = VLayout()
vl_cmd = VLayout(0, 0)
for cmd in self.commands_list:
cw = Command(cmd, commands[cmd], self.device.p.get(cmd))
vl_cmd.addWidget(cw)
self.command_widgets[cmd] = cw
self.sm = CommandMultiSelect("SwitchMode", commands["SwitchMode"],
self.device.p.get("SwitchMode"))
vl_cmd.addWidget(self.sm)
vl_cmd.addStretch(1)
vl_so = VLayout(0, 0)
for so in self.setoption_list:
cw = Command("SetOption{}".format(so), setoptions[str(so)],
self.device.setoption(so))
vl_so.addWidget(cw)
self.setoption_widgets[so] = cw
vl_so.addStretch(1)
tabs = QTabWidget()
tab_cm = QWidget()
tab_cm.setLayout(vl_cmd)
tabs.addTab(tab_cm, "Settings")
tab_so = QWidget()
tab_so.setLayout(vl_so)
tabs.addTab(tab_so, "SetOptions")
vl.addWidget(tabs)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
vl.addWidgets([
HTMLLabel(
"<a href=https://github.com/arendst/Sonoff-Tasmota/wiki/Buttons-and-Switches>Buttons and Switches</a>"
), btns
])
self.setLayout(vl)
def __init__(self, device, *args, **kwargs):
super(PowerDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("Power settings [{}]".format(device.name))
self.setMinimumWidth(300)
self.device = device
self.commands_list = ["BlinkCount", "BlinkTime", "PowerOnState", "PowerRetain"]
self.command_widgets = {}
self.setoption_list = [0, 26, 63]
self.setoption_widgets = {}
vl = VLayout()
vl_cmd = VLayout(0, 0)
for cmd in self.commands_list:
cw = Command(cmd, commands[cmd], self.device.p.get(cmd))
vl_cmd.addWidget(cw)
self.command_widgets[cmd] = cw
self.ci = Interlock("Interlock", commands["Interlock"], {"Interlock": self.device.p.get("Interlock", "OFF"), "Groups": self.device.p.get("Groups", "")})
vl_cmd.addWidget(self.ci)
self.cpt = PulseTime("PulseTime", commands["PulseTime"], self.device.pulsetime())
vl_cmd.addWidget(self.cpt)
vl_cmd.addStretch(1)
vl_so = VLayout(0, 0)
for so in self.setoption_list:
cw = Command("SetOption{}".format(so), setoptions[str(so)], self.device.setoption(so))
vl_so.addWidget(cw)
self.setoption_widgets[so] = cw
vl_so.addStretch(1)
tabs = QTabWidget()
tab_cm = QWidget()
tab_cm.setLayout(vl_cmd)
tabs.addTab(tab_cm, "Settings")
tab_so = QWidget()
tab_so.setLayout(vl_so)
tabs.addTab(tab_so, "SetOptions")
vl.addWidget(tabs)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
vl.addWidgets([HTMLLabel("<a href={}/Buttons-and-Switches>Buttons and Switches</a>".format(docs_url)), btns])
self.setLayout(vl)
def tabModule(self):
module = QWidget()
module.setLayout(HLayout())
self.gbModule = GroupBoxH("Module")
self.cbModule = QComboBox()
self.pbModuleSet = QPushButton("Save and close (device will restart)")
self.gbModule.addWidgets([self.cbModule, self.pbModuleSet])
self.pbModuleSet.clicked.connect(self.saveModule)
self.gbGPIO = QGroupBox("GPIO")
fl_gpio = QFormLayout()
pbGPIOSet = QPushButton("Save and close (device will restart)")
fl_gpio.addWidget(pbGPIOSet)
pbGPIOSet.clicked.connect(self.saveGPIOs)
self.gbGPIO.setLayout(fl_gpio)
mg_vl = VLayout([0, 0, 3, 0])
mg_vl.addWidgets([self.gbModule, self.gbGPIO])
mg_vl.setStretch(0, 1)
mg_vl.setStretch(1, 3)
self.gbFirmware = GroupBoxV("Firmware", margin=[3, 0, 0, 0])
lb = QLabel("Feature under development.")
lb.setAlignment(Qt.AlignCenter)
lb.setEnabled(False)
self.gbFirmware.addWidget(lb)
module.layout().addLayout(mg_vl)
module.layout().addWidget(self.gbFirmware)
return module
def __init__(self, parent, topic, *args, **kwargs):
super(DevicesConfigWidget, self).__init__(*args, **kwargs)
self.settings = QSettings()
self.topic = topic
self.full_topic = self.settings.value(
'Devices/{}/full_topic'.format(topic))
self.friendly_name = self.settings.value(
'Devices/{}/friendly_name'.format(topic))
self.cmnd_topic = self.full_topic.replace("%topic%",
self.topic).replace(
"%prefix%", 'cmnd')
self.tele_topic = self.full_topic.replace(
"%topic%", self.topic).replace("%prefix%", 'tele') + "+"
self.stat_topic = self.full_topic.replace(
"%topic%", self.topic).replace("%prefix%", 'stat') + "+"
self.setWindowTitle(self.friendly_name)
self.mqtt = MqttClient()
self.module = None
self.modules = []
self.gpios = []
self.supported_gpios = []
self.current_gpios = {}
self.setLayout(VLayout(margin=[0, 6, 0, 0], spacing=3))
self.build_detail_row()
self.build_tabs()
self.create_timers()
def openWebUI(self):
self.device_username = self.settings.value("device_username", "", str)
self.device_password = self.settings.value("device_password", "", str)
if self.device and self.device.p.get('IPAddress'):
url = QUrl("http://{}:{}@{}".format( self.device_username, \
urllib.parse.quote(self.device_password),self.device.p['IPAddress']))
try:
webui = QWebEngineView()
webui.load(url)
frm_webui = QFrame()
frm_webui.setWindowTitle("WebUI [{}]".format(
self.device.p['FriendlyName1']))
frm_webui.setFrameShape(QFrame.StyledPanel)
frm_webui.setLayout(VLayout(0))
frm_webui.layout().addWidget(webui)
frm_webui.destroyed.connect(self.updateMDI)
self.mdi.addSubWindow(frm_webui)
self.mdi.setViewMode(QMdiArea.TabbedView)
frm_webui.setWindowState(Qt.WindowMaximized)
except NameError:
QDesktopServices.openUrl(url)
def __init__(self, device, *args, **kwargs):
super(GPIODialog, self).__init__(*args, **kwargs)
self.setWindowTitle("GPIO [{}]".format(device.p['FriendlyName1']))
self.setMinimumWidth(300)
self.device = device
self.gb = {}
btns = QDialogButtonBox(QDialogButtonBox.Close)
btns.rejected.connect(self.reject)
gbxGPIO = QGroupBox("Select GPIO")
fl = QFormLayout()
if self.device.gpio:
btns.addButton(QDialogButtonBox.Save)
btns.accepted.connect(self.accept)
for gp_name, gp_id in self.device.gpio.items():
gb = DictComboBox(self.device.gpios)
gb.setCurrentText(self.device.gpios[gp_id])
self.gb[gp_name] = gb
fl.addRow(gp_name, gb)
else:
fl.addWidget(QLabel("No configurable GPIOs"))
gbxGPIO.setLayout(fl)
vl = VLayout()
vl.addWidgets([gbxGPIO, btns])
self.setLayout(vl)
def __init__(self, device, *args, **kwargs):
super(SetOptionsDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("SetOptions [{}]".format(device.p['FriendlyName1']))
self.setMinimumWidth(300)
self.device = device
self.gbs = []
vl = VLayout()
for i, so in setoptions.items():
gb = GroupBoxV("SetOption{}".format(i))
cb = DictComboBox(so['parameters'])
gb.addWidgets([QLabel(so['description']), cb])
vl.addWidget(gb)
# self.gb = DictComboBox(self.device.modules)
# self.gb.setCurrentText(self.device.modules[str(self.device.p['Module'])])
# gbxModules.addWidget(self.gb)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
vl.addWidget(btns)
self.setLayout(vl)
def __init__(self, env, *args, **kwargs):
super(ClearLWTDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("Clear obsolete retained LWTs")
self.setMinimumSize(QSize(320, 480))
self.env = env
vl = VLayout()
sel_btns = QDialogButtonBox()
sel_btns.setCenterButtons(True)
btnSelAll = sel_btns.addButton("Select all",
QDialogButtonBox.ActionRole)
btnSelNone = sel_btns.addButton("Select none",
QDialogButtonBox.ActionRole)
self.lw = QListWidget()
for lwt in self.env.lwts:
itm = QListWidgetItem(lwt)
itm.setCheckState(Qt.Unchecked)
self.lw.addItem(itm)
btnSelAll.clicked.connect(lambda: self.select(Qt.Checked))
btnSelNone.clicked.connect(lambda: self.select(Qt.Unchecked))
btns = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
vl.addWidgets([sel_btns, self.lw, btns])
self.setLayout(vl)
def __init__(self, device, *args, **kwargs):
super(ButtonsDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("Buttons settings [{}]".format(device.name))
self.setMinimumWidth(300)
self.device = device
self.commands_list = ["ButtonDebounce", "ButtonRetain"]
self.command_widgets = {}
self.setoption_list = [11, 13, 32, 40, 61]
self.setoption_widgets = {}
vl = VLayout()
vl_cmd = VLayout(0, 0)
for cmd in self.commands_list:
cw = Command(cmd, commands[cmd], self.device.p.get(cmd))
vl_cmd.addWidget(cw)
self.command_widgets[cmd] = cw
vl_cmd.addStretch(1)
vl_so = VLayout(0, 0)
for so in self.setoption_list:
cw = Command("SetOption{}".format(so), setoptions[str(so)],
self.device.setoption(so))
vl_so.addWidget(cw)
self.setoption_widgets[so] = cw
tabs = QTabWidget()
tab_cm = QWidget()
tab_cm.setLayout(vl_cmd)
tabs.addTab(tab_cm, "Settings")
tab_so = QWidget()
tab_so.setLayout(vl_so)
tabs.addTab(tab_so, "SetOptions")
vl.addWidget(tabs)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
vl.addWidgets([
HTMLLabel(
"<a href={}/Buttons-and-Switches>Buttons and Switches</a>".
format(docs_url)), btns
])
self.setLayout(vl)
def __init__(self, *args, **kwargs):
super(PrefsDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("Preferences")
# self.setMinimumSize(QSize(300, 200))
self.settings = QSettings("{}/TDM/tdm.cfg".format(QDir.homePath()),
QSettings.IniFormat)
self.devices_short_version = self.settings.value(
"devices_short_version", True, bool)
self.console_word_wrap = self.settings.value("console_word_wrap", True,
bool)
self.console_font_size = self.settings.value("console_font_size", 9,
int)
vl = VLayout()
gbDevices = QGroupBox("Device list")
fl_dev = QFormLayout()
self.cbDevShortVersion = QCheckBox()
self.cbDevShortVersion.setChecked(self.devices_short_version)
fl_dev.addRow("Show short Tasmota version", self.cbDevShortVersion)
fl_dev.setAlignment(self.cbDevShortVersion,
Qt.AlignTop | Qt.AlignRight)
gbDevices.setLayout(fl_dev)
gbConsole = QGroupBox("Console")
fl_cons = QFormLayout()
self.cbConsWW = QCheckBox()
self.cbConsWW.setChecked(self.console_word_wrap)
self.sbConsFontSize = SpinBox(minimum=9, maximum=100)
self.sbConsFontSize.setValue(self.console_font_size)
gbConsole.setLayout(fl_cons)
fl_cons.addRow("Word wrap", self.cbConsWW)
fl_cons.addRow("Font size", self.sbConsFontSize)
fl_cons.setAlignment(self.cbConsWW, Qt.AlignTop | Qt.AlignRight)
fl_cons.setAlignment(self.sbConsFontSize, Qt.AlignTop | Qt.AlignRight)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
vl.addWidgets([gbDevices, gbConsole, btns])
self.setLayout(vl)
def __init__(self, *args, **kwargs):
super(BrokerDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("MQTT Broker")
self.settings = QSettings("{}/TDM/tdm.cfg".format(QDir.homePath()),
QSettings.IniFormat)
gbHost = QGroupBox("Hostname and port")
hfl = QFormLayout()
self.hostname = QLineEdit()
self.hostname.setText(self.settings.value("hostname", "localhost"))
self.port = SpinBox(maximum=65535)
self.port.setValue(self.settings.value("port", 1883, int))
hfl.addRow("Hostname", self.hostname)
hfl.addRow("Port", self.port)
gbHost.setLayout(hfl)
gbLogin = QGroupBox("Credentials [optional]")
lfl = QFormLayout()
self.username = QLineEdit()
self.username.setText(self.settings.value("username", ""))
self.password = QLineEdit()
self.password.setEchoMode(QLineEdit.PasswordEchoOnEdit)
self.password.setText(self.settings.value("password", ""))
lfl.addRow("Username", self.username)
lfl.addRow("Password", self.password)
gbLogin.setLayout(lfl)
gbClientId = QGroupBox("Client ID [optional]")
cfl = QFormLayout()
self.clientId = QLineEdit()
self.clientId.setText(
self.settings.value("client_id", "tdm-" + self.random_generator()))
cfl.addRow("Client ID", self.clientId)
gbClientId.setLayout(cfl)
self.cbConnectStartup = QCheckBox("Connect on startup")
self.cbConnectStartup.setChecked(
self.settings.value("connect_on_startup", False, bool))
hlBtn = HLayout()
btnSave = QPushButton("Save")
btnCancel = QPushButton("Cancel")
hlBtn.addWidgets([btnSave, btnCancel])
vl = VLayout()
vl.addWidgets([gbHost, gbLogin, self.cbConnectStartup])
vl.addLayout(hlBtn)
self.setLayout(vl)
btnSave.clicked.connect(self.accept)
btnCancel.clicked.connect(self.reject)
def __init__(self, device, *args, **kwargs):
super(TemplateDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("Template [{}]".format(device.p['FriendlyName1']))
self.setMinimumWidth(300)
self.device = device
self.gb = {}
gpios = {"255": "User"}
gpios.update(self.device.gpios)
btns = QDialogButtonBox(QDialogButtonBox.Cancel)
btns.rejected.connect(self.reject)
gbxTmpl = QGroupBox("Configure template")
fl = QFormLayout()
if self.device.p['Template']:
btns.addButton(QDialogButtonBox.Save)
btns.accepted.connect(self.accept)
tpl = self.device.p['Template']
print(tpl)
self.leName = QLineEdit()
self.leName.setMaxLength(14)
self.leName.setText(tpl['NAME'])
fl.addRow("Name", self.leName)
self.gbxBase = DictComboBox(self.device.modules)
self.gbxBase.setCurrentText(self.device.modules[str(tpl['BASE'])])
fl.addRow("Based on", self.gbxBase)
for i, g in enumerate(
[0, 1, 2, 3, 4, 5, 9, 10, 12, 13, 14, 15, 16]):
gbx = DictComboBox(gpios)
gbx.setCurrentText(gpios.get(str(tpl['GPIO'][i])))
fl.addRow(
"<font color='{}'>GPIO{}</font>".format(
'red' if g in [9, 10] else 'black', g), gbx)
self.gb[i] = gbx
self.gbxADC = DictComboBox(template_adc)
fl.addRow("ADC0", self.gbxADC)
else:
fl.addWidget(
QLabel(
"Templates not supported.\nUpgrade firmware to versions above 6.5"
))
gbxTmpl.setLayout(fl)
vl = VLayout()
vl.addWidgets([gbxTmpl, btns])
self.setLayout(vl)
def __init__(self, parent, *args, **kwargs):
super(DevicesListWidget, self).__init__(*args, **kwargs)
self.setWindowTitle("Devices list")
self.setWindowState(Qt.WindowMaximized)
self.setLayout(VLayout(margin=0, spacing=0))
self.mqtt = parent.mqtt
self.mdi = parent.mdi
self.idx = None
self.nam = QNetworkAccessManager()
self.backup = bytes()
self.settings = QSettings("{}/TDM/tdm.cfg".format(QDir.homePath()),
QSettings.IniFormat)
self.hidden_columns = self.settings.value("hidden_columns", [1, 2])
self.tb = Toolbar(Qt.Horizontal, 16, Qt.ToolButtonTextBesideIcon)
self.tb.addAction(QIcon("GUI/icons/add.png"), "Add", self.device_add)
self.layout().addWidget(self.tb)
self.device_list = TableView()
self.model = parent.device_model
self.telemetry_model = parent.telemetry_model
self.sorted_device_model = QSortFilterProxyModel()
self.sorted_device_model.setSourceModel(parent.device_model)
self.device_list.setModel(self.sorted_device_model)
self.device_list.setupColumns(columns, self.hidden_columns)
self.device_list.setSortingEnabled(True)
self.device_list.setWordWrap(True)
self.device_list.setItemDelegate(DeviceDelegate())
self.device_list.sortByColumn(DevMdl.TOPIC, Qt.AscendingOrder)
self.device_list.setContextMenuPolicy(Qt.CustomContextMenu)
self.layout().addWidget(self.device_list)
self.device_list.clicked.connect(self.select_device)
self.device_list.doubleClicked.connect(self.device_config)
self.device_list.customContextMenuRequested.connect(
self.show_list_ctx_menu)
self.device_list.horizontalHeader().setContextMenuPolicy(
Qt.CustomContextMenu)
self.device_list.horizontalHeader().customContextMenuRequested.connect(
self.show_header_ctx_menu)
self.ctx_menu = QMenu()
self.ctx_menu_relays = None
self.create_actions()
self.build_header_ctx_menu()
def __init__(self, *args, **kwargs):
super(PatternsDialog, self).__init__(*args, **kwargs)
self.setMinimumHeight(400)
self.setMinimumWidth(400)
self.setWindowTitle("Autodiscovery patterns")
self.settings = QSettings("{}/TDM/tdm.cfg".format(QDir.homePath()),
QSettings.IniFormat)
self.settings.beginGroup("Patterns")
vl = VLayout()
cols = ["Pattern"]
self.tw = QTableWidget(0, 1)
self.tw.setHorizontalHeaderLabels(cols)
self.tw.verticalHeader().hide()
self.tw.horizontalHeader().setSectionResizeMode(0, QHeaderView.Stretch)
for k in self.settings.childKeys():
row = self.tw.rowCount()
self.tw.insertRow(row)
self.tw.setItem(row, 0, QTableWidgetItem(self.settings.value(k)))
vl.addWidgets([
QLabel(
"Add your modified FullTopic patterns to enable auto-discovery of such devices\n"
"Patterns MUST include %prefix%, %topic% and trailing /\n"
"Default Tasmota FullTopics are built-in\n\n"
"You have to reconnect to your Broker after topic changes."),
self.tw
])
hl_btns = HLayout([0, 3, 0, 3])
btnAdd = QPushButton("Add")
btnDel = QPushButton("Delete")
btnCancel = QPushButton("Cancel")
btnSave = QPushButton("Save")
hl_btns.addWidgets([btnAdd, btnDel, btnSave, btnCancel])
hl_btns.insertStretch(2)
vl.addLayout(hl_btns)
self.setLayout(vl)
self.idx = None
self.tw.clicked.connect(self.select)
btnAdd.clicked.connect(self.add)
btnDel.clicked.connect(self.delete)
btnSave.clicked.connect(self.accept)
btnCancel.clicked.connect(self.reject)
def __init__(self, *args, **kwargs):
super(BSSIdDialog, self).__init__(*args, **kwargs)
self.setMinimumHeight(400)
self.setMinimumWidth(400)
self.setWindowTitle("BSSId aliases")
self.settings = QSettings("{}/TDM/tdm.cfg".format(QDir.homePath()),
QSettings.IniFormat)
self.settings.beginGroup("BSSId")
vl = VLayout()
cols = ["BSSId", "Alias"]
self.tw = QTableWidget(0, 2)
self.tw.setHorizontalHeaderLabels(cols)
self.tw.verticalHeader().hide()
for c in range(2):
self.tw.horizontalHeader().setSectionResizeMode(
c, QHeaderView.Stretch)
for k in self.settings.childKeys():
row = self.tw.rowCount()
self.tw.insertRow(row)
self.tw.setItem(row, 0, QTableWidgetItem(k))
self.tw.setItem(row, 1, QTableWidgetItem(self.settings.value(k)))
vl.addWidget(self.tw)
hl_btns = HLayout([0, 3, 0, 3])
btnAdd = QPushButton("Add")
btnDel = QPushButton("Delete")
btnCancel = QPushButton("Cancel")
btnSave = QPushButton("Save")
hl_btns.addWidgets([btnAdd, btnDel, btnSave, btnCancel])
hl_btns.insertStretch(2)
vl.addLayout(hl_btns)
self.setLayout(vl)
self.idx = None
self.tw.clicked.connect(self.select)
btnAdd.clicked.connect(self.add)
btnDel.clicked.connect(self.delete)
btnSave.clicked.connect(self.accept)
btnCancel.clicked.connect(self.reject)
def __init__(self, parent, topic, *args, **kwargs):
super(DevicesConfigWidget, self).__init__(*args, **kwargs)
self.settings = QSettings("{}/TDM/tdm.cfg".format(QDir.homePath()),
QSettings.IniFormat)
self.topic = topic
self.full_topic = self.settings.value(
'Devices/{}/full_topic'.format(topic))
self.friendly_name = self.settings.value(
'Devices/{}/friendly_name'.format(topic))
self.cmnd_topic = self.full_topic.replace("%topic%",
self.topic).replace(
"%prefix%", 'cmnd')
self.tele_topic = self.full_topic.replace(
"%topic%", self.topic).replace("%prefix%", 'tele') + "+"
self.stat_topic = self.full_topic.replace(
"%topic%", self.topic).replace("%prefix%", 'stat') + "+"
self.setWindowTitle(self.friendly_name)
self.mqtt = MqttClient()
self.module = None
self.modules = []
self.gpios = []
self.supported_gpios = []
self.gpio_cb = []
self.timers = False
self.setLayout(VLayout(margin=[0, 6, 0, 0], spacing=3))
self.lbModule = QLabel("Connecting...")
fnt = self.lbModule.font()
fnt.setPointSize(14)
fnt.setBold(True)
self.lbModule.setFont(fnt)
self.lbModule.setAlignment(Qt.AlignCenter)
self.lbModule.setMaximumHeight(25)
self.layout().addWidget(self.lbModule)
self.build_tabs()
self.create_timers()
def __init__(self, device, *args, **kwargs):
super(ModuleDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("Module [{}]".format(device.name))
self.setMinimumWidth(300)
self.device = device
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
gbxModules = GroupBoxV("Select Module")
self.gb = DictComboBox(self.device.modules)
self.gb.setCurrentText(self.device.modules[str(self.device.p['Module'])])
gbxModules.addWidget(self.gb)
vl = VLayout()
vl.addWidgets([gbxModules, btns])
self.setLayout(vl)
def __init__(self, model, row, *args, **kwargs):
super(DeviceEditDialog, self).__init__(*args, **kwargs)
self.setMinimumWidth(400)
self.setWindowTitle("Edit device")
self.settings = QSettings()
self.settings.beginGroup("Devices")
self.mapper = QDataWidgetMapper()
self.mapper.setModel(model)
self.mapper.setSubmitPolicy(QDataWidgetMapper.ManualSubmit)
vl = VLayout()
gbTopic = QGroupBox("MQTT Topic")
self.topic = QLineEdit()
self.topic.setPlaceholderText("unique name of your device")
self.mapper.addMapping(self.topic, DevMdl.TOPIC)
self.full_topic = QLineEdit()
self.full_topic.setPlaceholderText("must contain %prefix% and %topic%")
self.mapper.addMapping(self.full_topic, DevMdl.FULL_TOPIC)
tfl = QFormLayout()
tfl.addRow("Topic", self.topic)
tfl.addRow("Full topic", self.full_topic)
gbTopic.setLayout(tfl)
btnSave = QPushButton("Save")
btnCancel = QPushButton("Cancel")
hl_btns = HLayout()
hl_btns.addStretch(1)
hl_btns.addWidgets([btnSave, btnCancel])
vl.addWidgets([gbTopic])
vl.addLayout(hl_btns)
self.setLayout(vl)
self.mapper.setCurrentIndex(row)
btnSave.clicked.connect(self.accept)
btnCancel.clicked.connect(self.reject)
def __init__(self, *args, **kwargs):
super(BrokerDialog, self).__init__(*args, **kwargs)
self.setWindowTitle("MQTT Broker")
self.settings = QSettings()
gbHost = QGroupBox("Hostname and port")
hfl = QFormLayout()
self.hostname = QLineEdit()
self.hostname.setText(self.settings.value("hostname", "localhost"))
self.port = SpinBox(maximum=65535)
self.port.setValue(self.settings.value("port", 1883, int))
hfl.addRow("Hostname", self.hostname)
hfl.addRow("Port", self.port)
gbHost.setLayout(hfl)
gbLogin = QGroupBox("Credentials [optional]")
lfl = QFormLayout()
self.username = QLineEdit()
self.username.setText(self.settings.value("username", ""))
self.password = QLineEdit()
self.password.setEchoMode(QLineEdit.PasswordEchoOnEdit)
self.password.setText(self.settings.value("password", ""))
lfl.addRow("Username", self.username)
lfl.addRow("Password", self.password)
gbLogin.setLayout(lfl)
hlBtn = HLayout()
btnSave = QPushButton("Save")
btnCancel = QPushButton("Cancel")
hlBtn.addWidgets([btnSave, btnCancel])
vl = VLayout()
vl.addWidgets([gbHost, gbLogin])
vl.addLayout(hlBtn)
self.setLayout(vl)
btnSave.clicked.connect(self.accept)
btnCancel.clicked.connect(self.reject)
def openWebUI(self):
if self.device and self.device.p.get('IPAddress'):
url = QUrl("http://{}".format(self.device.p['IPAddress']))
try:
webui = QWebEngineView()
webui.load(url)
frm_webui = QFrame()
frm_webui.setWindowTitle("WebUI [{}]".format(self.device.p['FriendlyName1']))
frm_webui.setFrameShape(QFrame.StyledPanel)
frm_webui.setLayout(VLayout(0))
frm_webui.layout().addWidget(webui)
frm_webui.destroyed.connect(self.updateMDI)
self.mdi.addSubWindow(frm_webui)
self.mdi.setViewMode(QMdiArea.TabbedView)
frm_webui.setWindowState(Qt.WindowMaximized)
except NameError:
QDesktopServices.openUrl(QUrl("http://{}".format(self.device.p['IPAddress'])))
def __init__(self, devices):
super().__init__()
self.setWindowFlags(Qt.Tool)
self.setMinimumSize(QSize(640, 480))
self.devices = devices
self.command = ""
vl = VLayout()
gbxDevice = GroupBoxV("Commands history for:")
gbDevice = QComboBox()
gbDevice.addItems([d.p['FriendlyName1'] for d in devices])
gbxDevice.addWidget(gbDevice)
self.lwCommands = QListWidget()
vl.addWidgets([
gbxDevice, self.lwCommands,
QLabel("Double-click a command to use it, ESC to close.")
])
self.setLayout(vl)
gbDevice.currentIndexChanged.connect(self.load_history)
self.lwCommands.doubleClicked.connect(self.select_command)
def __init__(self, device, *args, **kwargs):
super(RulesWidget, self).__init__(*args, **kwargs)
self.device = device
self.setWindowTitle("Rules [{}]".format(
self.device.p['FriendlyName1']))
self.poll_timer = QTimer()
self.poll_timer.timeout.connect(self.poll)
self.poll_timer.start(1000)
self.vars = [''] * 5
self.var = None
self.mems = [''] * 5
self.mem = None
self.rts = [0] * 8
self.rt = None
fnt_mono = QFont("asd")
fnt_mono.setStyleHint(QFont.TypeWriter)
tb = Toolbar(iconsize=24, label_position=Qt.ToolButtonTextBesideIcon)
vl = VLayout(margin=0, spacing=0)
self.cbRule = QComboBox()
self.cbRule.setMinimumWidth(100)
self.cbRule.addItems(["Rule{}".format(nr + 1) for nr in range(3)])
self.cbRule.currentTextChanged.connect(self.load_rule)
tb.addWidget(self.cbRule)
self.actEnabled = CheckableAction(QIcon("GUI/icons/off.png"),
"Enabled")
self.actEnabled.triggered.connect(self.toggle_rule)
self.actOnce = CheckableAction(QIcon("GUI/icons/once.png"), "Once")
self.actOnce.triggered.connect(self.toggle_once)
self.actStopOnError = CheckableAction(QIcon("GUI/icons/stop.png"),
"Stop on error")
self.actStopOnError.triggered.connect(self.toggle_stop)
tb.addActions([self.actEnabled, self.actOnce, self.actStopOnError])
self.cbRule.setFixedHeight(
tb.widgetForAction(self.actEnabled).height() + 1)
self.actUpload = tb.addAction(QIcon("GUI/icons/upload.png"), "Upload")
self.actUpload.triggered.connect(self.upload_rule)
# tb.addSeparator()
# self.actLoad = tb.addAction(QIcon("GUI/icons/open.png"), "Load...")
# self.actSave = tb.addAction(QIcon("GUI/icons/save.png"), "Save...")
tb.addSpacer()
self.counter = QLabel("Remaining: 511")
tb.addWidget(self.counter)
vl.addWidget(tb)
hl = HLayout(margin=[3, 0, 0, 0])
self.gbTriggers = GroupBoxV("Triggers")
self.triggers = QListWidget()
self.triggers.setAlternatingRowColors(True)
self.gbTriggers.addWidget(self.triggers)
self.gbEditor = GroupBoxV("Rule editor")
self.editor = QPlainTextEdit()
self.editor.setFont(fnt_mono)
self.editor.setPlaceholderText("loading...")
self.editor.textChanged.connect(self.update_counter)
self.gbEditor.addWidget(self.editor)
# hl.addWidgets([self.gbTriggers, self.gbEditor])
hl.addWidget(self.gbEditor)
self.rules_hl = RuleHighLighter(self.editor.document())
vl_helpers = VLayout(margin=[0, 0, 3, 0])
###### Polling
self.gbPolling = GroupBoxH("Automatic polling")
self.pbPollVars = QPushButton("VARs")
self.pbPollVars.setCheckable(True)
self.pbPollMems = QPushButton("MEMs")
self.pbPollMems.setCheckable(True)
self.pbPollRTs = QPushButton("RuleTimers")
self.pbPollRTs.setCheckable(True)
self.gbPolling.addWidgets(
[self.pbPollVars, self.pbPollMems, self.pbPollRTs])
###### VARS
# self.gbVars = GroupBoxV("VARs")
self.lwVars = QListWidget()
self.lwVars.setAlternatingRowColors(True)
self.lwVars.addItems(
["VAR{}: loading...".format(i) for i in range(1, 6)])
self.lwVars.clicked.connect(self.select_var)
self.lwVars.doubleClicked.connect(self.set_var)
# self.gbVars.addWidget(self.lwVars)
###### MEMS
# self.gbMems = GroupBoxV("MEMs")
self.lwMems = QListWidget()
self.lwMems.setAlternatingRowColors(True)
self.lwMems.addItems(
["MEM{}: loading...".format(i) for i in range(1, 6)])
self.lwMems.clicked.connect(self.select_mem)
self.lwMems.doubleClicked.connect(self.set_mem)
# self.gbMems.addWidget(self.lwMems)
###### RuleTimers
# self.gbRTs = GroupBoxV("Rule timers")
self.lwRTs = QListWidget()
self.lwRTs.setAlternatingRowColors(True)
self.lwRTs.addItems(
["RuleTimer{}: loading...".format(i) for i in range(1, 9)])
self.lwRTs.clicked.connect(self.select_rt)
self.lwRTs.doubleClicked.connect(self.set_rt)
# self.gbRTs.addWidget(self.lwRTs)
# vl_helpers.addWidgets([self.gbPolling, self.gbVars, self.gbMems, self.gbRTs])
vl_helpers.addWidgets(
[self.gbPolling, self.lwVars, self.lwMems, self.lwRTs])
hl.addLayout(vl_helpers)
hl.setStretch(0, 3)
hl.setStretch(1, 1)
# hl.setStretch(2, 1)
vl.addLayout(hl)
self.setLayout(vl)
def __init__(self, device, *args, **kwargs):
super().__init__()
self.setAllowedAreas(Qt.BottomDockWidgetArea)
self.setWindowTitle("Console [{}]".format(device.name))
self.device = device
self.settings = QSettings("{}/TDM/tdm.cfg".format(QDir.homePath()),
QSettings.IniFormat)
console_font_size = self.settings.value("console_font_size", 9, int)
console_font.setPointSize(console_font_size)
console_word_wrap = self.settings.value("console_word_wrap", True,
bool)
w = QWidget()
vl = VLayout()
self.console = QPlainTextEdit()
self.console.setTabChangesFocus(True)
self.console.setWordWrapMode(console_word_wrap)
self.console.setReadOnly(True)
self.console.setFont(console_font)
self.console_hl = JSONHighLighter(self.console.document())
hl_command_mqttlog = HLayout(0)
self.command = QLineEdit()
self.command.setFont(console_font)
self.command.setPlaceholderText(
"Type the command and press ENTER to send.")
self.command.returnPressed.connect(self.command_enter)
self.command.textChanged.connect(self.command_changed)
self.command.installEventFilter(self)
command_cpl = QCompleter(sorted(commands))
command_cpl.setCaseSensitivity(Qt.CaseInsensitive)
command_cpl.setCompletionMode(QCompleter.UnfilteredPopupCompletion)
self.command.setCompleter(command_cpl)
# command_cpl.popup().installEventFilter(self)
command_cpl.activated.connect(self.command.clear, Qt.QueuedConnection)
pbSave = QPushButton(QIcon("GUI/icons/save.png"), "")
pbSave.setFlat(True)
pbSave.setToolTip("Save console")
pbSave.clicked.connect(self.save_console)
pbClear = QPushButton(QIcon("GUI/icons/clear.png"), "")
pbClear.setFlat(True)
pbClear.setToolTip("Clear console")
pbClear.clicked.connect(self.clear_console)
self.cbMQTTLog = QComboBox()
self.cbMQTTLog.addItems([
"Disabled", "Error", "Error/Info (default)", "Error/Info/Debug",
"Error/Info/More debug", "All"
])
mqttlog = self.device.p.get("MqttLog", -1)
if mqttlog != -1:
self.cbMQTTLog.setCurrentIndex(int(mqttlog))
else:
self.cbMQTTLog.setEnabled(False)
self.cbMQTTLog.currentIndexChanged.connect(self.change_mqttlog)
hl_command_mqttlog.addWidgets([
self.command, pbSave, pbClear,
QLabel("MQTT Log level"), self.cbMQTTLog
])
vl.addWidget(self.console)
vl.addLayout(hl_command_mqttlog)
w.setLayout(vl)
self.setWidget(w)
def tabRules(self):
rules = QWidget()
rules.setLayout(VLayout())
for r in range(3):
rg = RuleGroupBox(rules, "Rule buffer {}".format(r + 1))
rg.pbLoad.clicked.connect(lambda x, r=r + 1: self.loadRule(r))
self.rule_grps.append(rg)
rules.layout().addWidget(rg)
rules.layout().setStretch(r, 1)
gRT = GroupBoxH("Rule timers")
vl_RT_func = VLayout(margin=[0, 0, 3, 0])
self.pbRTPoll = QPushButton("Poll")
self.pbRTPoll.setCheckable(True)
self.pbRTSet = QPushButton("Set")
vl_RT_func.addWidgets([self.pbRTPoll, self.pbRTSet])
vl_RT_func.addStretch(1)
gRT.layout().addLayout(vl_RT_func)
self.twRT = QTableWidget(1, 8)
self.twRT.setHorizontalHeaderLabels(
["T{}".format(i) for i in range(1, 9)])
for c in range(8):
self.twRT.horizontalHeader().setSectionResizeMode(
c, QHeaderView.Stretch)
self.twRT.setCellWidget(0, c, SpinBox(minimum=0, maximum=32766))
self.twRT.verticalHeader().hide()
self.twRT.verticalHeader().setDefaultSectionSize(
self.twRT.horizontalHeader().height() * 2 + 1)
self.twRT.setMaximumHeight(self.twRT.horizontalHeader().height() +
self.twRT.rowHeight(0))
gRT.layout().addWidget(self.twRT)
gVM = GroupBoxH("VAR/MEM")
vl_VM_func = VLayout(margin=[3, 0, 0, 0])
self.pbVMPoll = QPushButton("Poll")
self.pbVMPoll.setCheckable(True)
self.pbVMSet = QPushButton("Set")
vl_VM_func.addWidgets([self.pbVMPoll, self.pbVMSet])
vl_VM_func.addStretch(1)
gVM.layout().addLayout(vl_VM_func)
self.twVM = QTableWidget(2, 5)
self.twVM.setHorizontalHeaderLabels(
["{}".format(i) for i in range(1, 9)])
self.twVM.setVerticalHeaderLabels(["VAR", "MEM"])
self.twVM.setVerticalScrollBarPolicy(Qt.ScrollBarAlwaysOff)
for c in range(5):
self.twVM.horizontalHeader().setSectionResizeMode(
c, QHeaderView.Stretch)
for r in range(2):
for c in range(5):
self.twVM.setCellWidget(r, c, QLineEdit())
self.twVM.verticalHeader().setDefaultSectionSize(
self.twVM.horizontalHeader().height())
self.twVM.setMaximumHeight(self.twVM.horizontalHeader().height() +
self.twVM.rowHeight(0) * 2)
gVM.layout().addWidget(self.twVM)
hl_rt_vm = HLayout()
hl_rt_vm.addWidgets([gRT, gVM])
rules.layout().addLayout(hl_rt_vm)
rules.layout().setStretch(3, 0)
return rules
def __init__(self, device, *args, **kwargs):
super().__init__()
self.setAllowedAreas(Qt.BottomDockWidgetArea)
self.setWindowTitle("Console [{}]".format(device.p["FriendlyName1"]))
self.device = device
w = QWidget()
vl = VLayout()
self.console = QPlainTextEdit()
self.console.setTabChangesFocus(True)
fnt_mono = QFont("asd")
fnt_mono.setStyleHint(QFont.TypeWriter)
self.console.setFont(fnt_mono)
self.console.setReadOnly(True)
self.console_hl = JSONHighLighter(self.console.document())
hl_command_mqttlog = HLayout(0)
self.command = QLineEdit()
self.command.setFont(fnt_mono)
self.command.setPlaceholderText(
"Type the command and press ENTER to send.")
self.command.returnPressed.connect(self.command_enter)
self.command.textChanged.connect(self.command_changed)
self.command.installEventFilter(self)
command_cpl = QCompleter(sorted(commands))
command_cpl.setCaseSensitivity(Qt.CaseInsensitive)
command_cpl.setCompletionMode(QCompleter.UnfilteredPopupCompletion)
self.command.setCompleter(command_cpl)
# command_cpl.popup().installEventFilter(self)
command_cpl.activated.connect(self.command.clear, Qt.QueuedConnection)
self.cbMQTTLog = QComboBox()
self.cbMQTTLog.addItems([
"Disabled", "Error", "Error/Info (default)", "Error/Info/Debug",
"Error/Info/More debug", "All"
])
mqttlog = self.device.p.get("MqttLog", -1)
if mqttlog != -1:
self.cbMQTTLog.setCurrentIndex(int(mqttlog))
else:
self.cbMQTTLog.setEnabled(False)
self.cbMQTTLog.currentIndexChanged.connect(self.change_mqttlog)
hl_command_mqttlog.addWidgets(
[self.command,
QLabel("MQTT Log level"), self.cbMQTTLog])
vl.addWidget(self.console)
vl.addLayout(hl_command_mqttlog)
w.setLayout(vl)
self.setWidget(w)
def __init__(self, device, *args, **kwargs):
super(TimersDialog, self).__init__(*args, **kwargs)
self.device = device
self.timers = {}
self.setWindowTitle("Timers [{}]".format(
self.device.p['FriendlyName1']))
vl = VLayout()
self.gbTimers = GroupBoxV("Enabled", spacing=5)
self.gbTimers.setCheckable(True)
self.gbTimers.toggled.connect(self.toggleTimers)
self.cbTimer = QComboBox()
self.cbTimer.addItems(["Timer{}".format(nr + 1) for nr in range(16)])
self.cbTimer.currentTextChanged.connect(self.loadTimer)
hl_tmr_arm_rpt = HLayout(0)
self.cbTimerArm = QCheckBox("Arm")
self.cbTimerArm.clicked.connect(lambda x: self.describeTimer())
self.cbTimerRpt = QCheckBox("Repeat")
self.cbTimerRpt.clicked.connect(lambda x: self.describeTimer())
hl_tmr_arm_rpt.addWidgets([self.cbTimerArm, self.cbTimerRpt])
hl_tmr_out_act = HLayout(0)
self.cbxTimerOut = QComboBox()
self.cbxTimerOut.addItems(self.device.power().keys())
self.cbxTimerOut.currentIndexChanged.connect(
lambda x: self.describeTimer())
self.cbxTimerAction = QComboBox()
self.cbxTimerAction.addItems(["Off", "On", "Toggle", "Rule"])
self.cbxTimerAction.currentIndexChanged.connect(
lambda x: self.describeTimer())
hl_tmr_out_act.addWidgets([self.cbxTimerOut, self.cbxTimerAction])
self.TimerMode = QButtonGroup()
rbTime = QRadioButton("Time")
rbSunrise = QRadioButton("Sunrise ({})".format(
self.device.p['Sunrise']))
rbSunset = QRadioButton("Sunset ({})".format(self.device.p['Sunset']))
self.TimerMode.addButton(rbTime, 0)
self.TimerMode.addButton(rbSunrise, 1)
self.TimerMode.addButton(rbSunset, 2)
self.TimerMode.buttonClicked.connect(lambda x: self.describeTimer())
gbTimerMode = GroupBoxH("Mode")
gbTimerMode.addWidgets(self.TimerMode.buttons())
hl_tmr_time = HLayout(0)
self.cbxTimerPM = QComboBox()
self.cbxTimerPM.addItems(["+", "-"])
self.cbxTimerPM.currentIndexChanged.connect(
lambda x: self.describeTimer())
self.TimerMode.buttonClicked[int].connect(
lambda x: self.cbxTimerPM.setEnabled(x != 0))
self.teTimerTime = QTimeEdit()
self.teTimerTime.setButtonSymbols(QTimeEdit.NoButtons)
self.teTimerTime.setAlignment(Qt.AlignCenter)
self.teTimerTime.timeChanged.connect(lambda x: self.describeTimer())
lbWnd = QLabel("Window:")
lbWnd.setAlignment(Qt.AlignVCenter | Qt.AlignRight)
self.cbxTimerWnd = QComboBox()
self.cbxTimerWnd.addItems([str(x).zfill(2) for x in range(0, 16)])
self.cbxTimerWnd.currentIndexChanged.connect(
lambda x: self.describeTimer())
hl_tmr_days = HLayout(0)
self.TimerWeekday = QButtonGroup()
self.TimerWeekday.setExclusive(False)
for i, wd in enumerate(
["Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"]):
cb = QCheckBox(wd)
cb.clicked.connect(lambda x: self.describeTimer())
hl_tmr_days.addWidget(cb)
self.TimerWeekday.addButton(cb, i)
gbTimerDesc = GroupBoxV("Timer description", 5)
gbTimerDesc.setMinimumHeight(200)
self.lbTimerDesc = QLabel()
self.lbTimerDesc.setAlignment(Qt.AlignCenter)
self.lbTimerDesc.setWordWrap(True)
gbTimerDesc.layout().addWidget(self.lbTimerDesc)
hl_tmr_time.addWidgets(
[self.cbxTimerPM, self.teTimerTime, lbWnd, self.cbxTimerWnd])
self.gbTimers.layout().addWidget(self.cbTimer)
self.gbTimers.layout().addLayout(hl_tmr_arm_rpt)
self.gbTimers.layout().addLayout(hl_tmr_out_act)
self.gbTimers.layout().addWidget(gbTimerMode)
self.gbTimers.layout().addLayout(hl_tmr_time)
self.gbTimers.layout().addLayout(hl_tmr_days)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
reload = btns.addButton("Reload", QDialogButtonBox.ResetRole)
btns.accepted.connect(self.saveTimer)
btns.rejected.connect(self.reject)
reload.clicked.connect(
lambda: self.loadTimer(self.cbTimer.currentText()))
vl.addWidgets([self.gbTimers, gbTimerDesc, btns])
self.setLayout(vl)
def tabInformation(self):
info = QWidget()
vl = VLayout()
self.program_model = QStandardItemModel()
for d in [
"Program version", "Build date & time", "Core/SDK version",
"Flash write count", "Boot count", "Restart reason",
"Friendly Name 1", "Friendly Name 2", "Friendly Name 3",
"Friendly Name 4"
]:
k = QStandardItem(d)
k.setEditable(False)
v = QStandardItem()
v.setTextAlignment(Qt.AlignVCenter | Qt.AlignRight)
v.setEditable(False)
self.program_model.appendRow([k, v])
gbPrgm = GroupBoxH("Program")
gbPrgm.setFlat(True)
tvPrgm = QTreeView()
tvPrgm.setHeaderHidden(True)
tvPrgm.setRootIsDecorated(False)
tvPrgm.setModel(self.program_model)
tvPrgm.resizeColumnToContents(0)
gbPrgm.addWidget(tvPrgm)
self.esp_model = QStandardItemModel()
for d in [
"ESP Chip Id", "Flash Chip Id", "Flash Size",
"Program Flash Size", "Program Size", "Free Program Space",
"Free Memory"
]:
k = QStandardItem(d)
k.setEditable(False)
v = QStandardItem()
v.setTextAlignment(Qt.AlignVCenter | Qt.AlignRight)
v.setEditable(False)
self.esp_model.appendRow([k, v])
gbESP = GroupBoxH("ESP")
gbESP.setFlat(True)
tvESP = QTreeView()
tvESP.setHeaderHidden(True)
tvESP.setRootIsDecorated(False)
tvESP.setModel(self.esp_model)
tvESP.resizeColumnToContents(0)
gbESP.addWidget(tvESP)
# self.emul_model = QStandardItemModel()
# for d in ["Emulation", "mDNS Discovery"]:
# k = QStandardItem(d)
# k.setEditable(False)
# v = QStandardItem()
# v.setTextAlignment(Qt.AlignVCenter | Qt.AlignRight)
# v.setEditable(False)
# self.emul_model.appendRow([k, v])
#
# gbEmul = GroupBoxH("Emulation")
# gbEmul.setFlat(True)
# tvEmul = QTreeView()
# tvEmul.setHeaderHidden(True)
# tvEmul.setRootIsDecorated(False)
# tvEmul.setModel(self.emul_model)
# tvEmul.resizeColumnToContents(0)
# gbEmul.addWidget(tvEmul)
self.wifi_model = QStandardItemModel()
for d in [
"AP1 SSId (RSSI)", "Hostname", "IP Address", "Gateway",
"Subnet Mask", "DNS Server", "MAC Address"
]:
k = QStandardItem(d)
k.setEditable(False)
v = QStandardItem()
v.setTextAlignment(Qt.AlignVCenter | Qt.AlignRight)
v.setEditable(False)
self.wifi_model.appendRow([k, v])
gbWifi = GroupBoxH("Wifi")
gbWifi.setFlat(True)
tvWifi = QTreeView()
tvWifi.setHeaderHidden(True)
tvWifi.setRootIsDecorated(False)
tvWifi.setModel(self.wifi_model)
tvWifi.resizeColumnToContents(0)
gbWifi.addWidget(tvWifi)
self.mqtt_model = QStandardItemModel()
for d in [
"MQTT Host", "MQTT Port", "MQTT User", "MQTT Client",
"MQTT Topic", "MQTT Group Topic", "MQTT Full Topic",
"MQTT Fallback Topic"
]:
k = QStandardItem(d)
k.setEditable(False)
v = QStandardItem()
v.setTextAlignment(Qt.AlignVCenter | Qt.AlignRight)
v.setEditable(False)
self.mqtt_model.appendRow([k, v])
gbMQTT = GroupBoxH("MQTT")
gbMQTT.setFlat(True)
tvMQTT = QTreeView()
tvMQTT.setHeaderHidden(True)
tvMQTT.setRootIsDecorated(False)
tvMQTT.setModel(self.mqtt_model)
tvMQTT.resizeColumnToContents(0)
gbMQTT.addWidget(tvMQTT)
hl = HLayout(0)
vl_lc = VLayout(0, 3)
vl_rc = VLayout(0, 3)
vl_lc.addWidgets([gbPrgm, gbESP])
vl_rc.addWidgets([gbWifi, gbMQTT])
vl_rc.setStretch(0, 2)
vl_rc.setStretch(1, 2)
vl_rc.setStretch(2, 1)
hl.addLayout(vl_lc)
hl.addLayout(vl_rc)
vl.addLayout(hl)
info.setLayout(vl)
return info
def __init__(self, parent, *args, **kwargs):
super(ListWidget, self).__init__(*args, **kwargs)
self.setWindowTitle("Devices list")
self.setWindowState(Qt.WindowMaximized)
self.setLayout(VLayout(margin=0, spacing=0))
self.mqtt = parent.mqtt
self.env = parent.env
self.device = None
self.idx = None
self.nam = QNetworkAccessManager()
self.backup = bytes()
self.settings = QSettings("{}/TDM/tdm.cfg".format(QDir.homePath()), QSettings.IniFormat)
views_order = self.settings.value("views_order", [])
self.views = {}
self.settings.beginGroup("Views")
views = self.settings.childKeys()
if views and views_order:
for view in views_order.split(";"):
view_list = self.settings.value(view).split(";")
self.views[view] = base_view + view_list
else:
self.views = default_views
self.settings.endGroup()
self.tb = Toolbar(Qt.Horizontal, 24, Qt.ToolButtonTextBesideIcon)
self.tb_relays = Toolbar(Qt.Horizontal, 24, Qt.ToolButtonIconOnly)
# self.tb_filter = Toolbar(Qt.Horizontal, 24, Qt.ToolButtonTextBesideIcon)
self.tb_views = Toolbar(Qt.Horizontal, 24, Qt.ToolButtonTextBesideIcon)
self.pwm_sliders = []
self.layout().addWidget(self.tb)
self.layout().addWidget(self.tb_relays)
# self.layout().addWidget(self.tb_filter)
self.device_list = TableView()
self.device_list.setIconSize(QSize(24, 24))
self.model = parent.device_model
self.model.setupColumns(self.views["Home"])
self.sorted_device_model = QSortFilterProxyModel()
self.sorted_device_model.setFilterCaseSensitivity(Qt.CaseInsensitive)
self.sorted_device_model.setSourceModel(parent.device_model)
self.sorted_device_model.setSortRole(Qt.InitialSortOrderRole)
self.sorted_device_model.setFilterKeyColumn(-1)
self.device_list.setModel(self.sorted_device_model)
self.device_list.setupView(self.views["Home"])
self.device_list.setSortingEnabled(True)
self.device_list.setWordWrap(True)
self.device_list.setItemDelegate(DeviceDelegate())
self.device_list.sortByColumn(self.model.columnIndex("FriendlyName"), Qt.AscendingOrder)
self.device_list.setContextMenuPolicy(Qt.CustomContextMenu)
self.device_list.verticalHeader().setSectionResizeMode(QHeaderView.ResizeToContents)
self.layout().addWidget(self.device_list)
self.layout().addWidget(self.tb_views)
self.device_list.clicked.connect(self.select_device)
self.device_list.customContextMenuRequested.connect(self.show_list_ctx_menu)
self.ctx_menu = QMenu()
self.ctx_menu_relays = None
self.create_actions()
self.create_view_buttons()
# self.create_view_filter()
self.device_list.doubleClicked.connect(lambda: self.openConsole.emit())
def tabRules(self):
rules = QWidget()
rules.setLayout(VLayout())
hl = HLayout(0)
vl_l = VLayout(0)
self.rg = RuleGroupBox(rules, "Rule editor")
self.rg.setFlat(True)
self.rg.cbRule.currentIndexChanged.connect(self.loadRule)
vl_l.addWidget(self.rg)
gRT = GroupBoxH("Rule timers")
vl_RT_func = VLayout(margin=[0, 0, 3, 0])
self.pbRTPoll = QPushButton("Poll")
self.pbRTPoll.setCheckable(True)
self.pbRTSet = QPushButton("Set")
vl_RT_func.addWidgets([self.pbRTPoll, self.pbRTSet])
vl_RT_func.addStretch(1)
gRT.layout().addLayout(vl_RT_func)
self.twRT = QTableWidget(1, 8)
self.twRT.setHorizontalHeaderLabels(
["T{}".format(i) for i in range(1, 9)])
for c in range(8):
self.twRT.horizontalHeader().setSectionResizeMode(
c, QHeaderView.Stretch)
self.twRT.setCellWidget(0, c, SpinBox(minimum=0, maximum=32766))
self.twRT.verticalHeader().hide()
self.twRT.verticalHeader().setDefaultSectionSize(
self.twRT.horizontalHeader().height() * 2 + 1)
self.twRT.setMaximumHeight(self.twRT.horizontalHeader().height() +
self.twRT.rowHeight(0))
gRT.layout().addWidget(self.twRT)
gVM = GroupBoxH("VAR/MEM")
vl_VM_func = VLayout(margin=[3, 0, 0, 0])
self.pbVMPoll = QPushButton("Poll")
self.pbVMPoll.setCheckable(True)
self.pbVMSet = QPushButton("Set")
vl_VM_func.addWidgets([self.pbVMPoll, self.pbVMSet])
vl_VM_func.addStretch(1)
gVM.layout().addLayout(vl_VM_func)
self.twVM = QTableWidget(2, 5)
self.twVM.setHorizontalHeaderLabels(
["{}".format(i) for i in range(1, 9)])
self.twVM.setVerticalHeaderLabels(["VAR", "MEM"])
self.twVM.setVerticalScrollBarPolicy(Qt.ScrollBarAlwaysOff)
for c in range(5):
self.twVM.horizontalHeader().setSectionResizeMode(
c, QHeaderView.Stretch)
for r in range(2):
for c in range(5):
self.twVM.setCellWidget(r, c, QLineEdit())
self.twVM.verticalHeader().setDefaultSectionSize(
self.twVM.horizontalHeader().height())
self.twVM.setMaximumHeight(self.twVM.horizontalHeader().height() +
self.twVM.rowHeight(0) * 2)
gVM.layout().addWidget(self.twVM)
hl_rt_vm = HLayout(0)
hl_rt_vm.addWidgets([gRT, gVM])
hl.addLayout(vl_l)
vl_r = VLayout(0)
self.gbTimers = GroupBoxV("Timers", spacing=5)
self.gbTimers.setCheckable(True)
self.gbTimers.setChecked(False)
self.gbTimers.toggled.connect(self.toggleTimers)
self.cbTimer = QComboBox()
self.cbTimer.addItems(["Timer{}".format(nr + 1) for nr in range(16)])
self.cbTimer.currentIndexChanged.connect(self.loadTimer)
hl_tmr_arm_rpt = HLayout(0)
self.cbTimerArm = QCheckBox("Arm")
self.cbTimerArm.clicked.connect(lambda x: self.describeTimer())
self.cbTimerRpt = QCheckBox("Repeat")
self.cbTimerRpt.clicked.connect(lambda x: self.describeTimer())
hl_tmr_arm_rpt.addWidgets([self.cbTimerArm, self.cbTimerRpt])
hl_tmr_out_act = HLayout(0)
self.cbxTimerOut = QComboBox()
self.cbxTimerOut.currentIndexChanged.connect(
lambda x: self.describeTimer())
self.cbxTimerAction = QComboBox()
self.cbxTimerAction.addItems(["Off", "On", "Toggle", "Rule"])
self.cbxTimerAction.currentIndexChanged.connect(
lambda x: self.describeTimer())
hl_tmr_out_act.addWidgets([self.cbxTimerOut, self.cbxTimerAction])
self.TimerMode = QButtonGroup()
rbTime = QRadioButton("Time")
rbSunrise = QRadioButton("Sunrise ({})")
rbSunset = QRadioButton("Sunset ({})")
self.TimerMode.addButton(rbTime, 0)
self.TimerMode.addButton(rbSunrise, 1)
self.TimerMode.addButton(rbSunset, 2)
self.TimerMode.buttonClicked.connect(lambda x: self.describeTimer())
gbTimerMode = GroupBoxH("Mode")
gbTimerMode.addWidgets(self.TimerMode.buttons())
hl_tmr_time = HLayout(0)
self.cbxTimerPM = QComboBox()
self.cbxTimerPM.addItems(["+", "-"])
self.cbxTimerPM.currentIndexChanged.connect(
lambda x: self.describeTimer())
self.TimerMode.buttonClicked[int].connect(
lambda x: self.cbxTimerPM.setEnabled(x != 0))
self.teTimerTime = QTimeEdit()
self.teTimerTime.setButtonSymbols(QTimeEdit.NoButtons)
self.teTimerTime.setAlignment(Qt.AlignCenter)
self.teTimerTime.timeChanged.connect(lambda x: self.describeTimer())
lbWnd = QLabel("Window:")
lbWnd.setAlignment(Qt.AlignVCenter | Qt.AlignRight)
self.cbxTimerWnd = QComboBox()
self.cbxTimerWnd.addItems([str(x).zfill(2) for x in range(0, 16)])
self.cbxTimerWnd.currentIndexChanged.connect(
lambda x: self.describeTimer())
hl_tmr_days = HLayout(0)
self.TimerWeekday = QButtonGroup()
self.TimerWeekday.setExclusive(False)
for i, wd in enumerate(
["Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"]):
cb = QCheckBox(wd)
cb.clicked.connect(lambda x: self.describeTimer())
hl_tmr_days.addWidget(cb)
self.TimerWeekday.addButton(cb, i)
gbTimerDesc = GroupBoxV("Timer description", 5)
gbTimerDesc.setSizePolicy(QSizePolicy.Preferred, QSizePolicy.Expanding)
self.lbTimerDesc = QLabel()
self.lbTimerDesc.setAlignment(Qt.AlignCenter)
self.lbTimerDesc.setWordWrap(True)
gbTimerDesc.layout().addWidget(self.lbTimerDesc)
hl_tmr_btns = HLayout(0)
btnCopyTrigger = QPushButton("Copy trigger")
btnTimerSave = QPushButton("Save")
hl_tmr_btns.addWidgets([btnCopyTrigger, btnTimerSave])
hl_tmr_btns.insertStretch(1)
btnTimerSave.clicked.connect(self.saveTimer)
btnCopyTrigger.clicked.connect(self.copyTrigger)
hl_tmr_time.addWidgets(
[self.cbxTimerPM, self.teTimerTime, lbWnd, self.cbxTimerWnd])
self.gbTimers.layout().addWidget(self.cbTimer)
self.gbTimers.layout().addLayout(hl_tmr_arm_rpt)
self.gbTimers.layout().addLayout(hl_tmr_out_act)
self.gbTimers.layout().addWidget(gbTimerMode)
self.gbTimers.layout().addLayout(hl_tmr_time)
self.gbTimers.layout().addLayout(hl_tmr_days)
self.gbTimers.layout().addWidget(gbTimerDesc)
self.gbTimers.layout().addLayout(hl_tmr_btns)
vl_r.addWidget(self.gbTimers)
hl.addLayout(vl_r)
hl.setStretch(0, 2)
hl.setStretch(1, 1)
rules.layout().addLayout(hl)
rules.layout().addLayout(hl_rt_vm)
rules.layout().setStretch(0, 3)
rules.layout().setStretch(1, 0)
return rules