Ejemplo n.º 1
0
def save(ctrl: Controller):
    ctrl.X()
    ctrl.pause(0.5)
    ctrl.R()
    ctrl.pause(1.5)
    ctrl.A()
    ctrl.pause(4)
Ejemplo n.º 2
0
from NXController import Controller

ctr = Controller()
## Or use your serial port if you have many
# ctr = Controller('/dev/tty.usbserial-AO0099VT'); 
ctr.A()
ctr.B()
ctr.X()
ctr.Y()
ctr.L()
ctr.R()
ctr.ZL()
ctr.ZR()
ctr.LS()
ctr.RS()
ctr.PLUS()
ctr.MINUS()
## long press to quit
ctr.B(5)
ctr.close()
Ejemplo n.º 3
0
class EggHatcher(object):
    """ 初始化需要背包队伍为空,蛋箱满
	"""
    def __init__(self, cycle):
        super(EggHatcher, self).__init__()
        self.m_Cycle = cycle
        self.m_CurCol = 0
        self.m_nxCtrl = Controller(printout=True)
        self.m_nxCtrl.LS()
        self.m_nxCtrl.pause(2)

    def start_hatch_egg(self):
        while self.m_CurCol <= 6:
            print("Cur Round: %s" % self.m_CurCol)
            # 取蛋
            self.pick_egg()
            if self.m_CurCol == 6:
                break
            # 孵蛋
            all_range = int(self.m_Cycle / 10)
            for i in range(all_range):
                # 5rang=10周期
                for j in range(5):
                    print("周期: %s" % (i * 10 + j * 2))
                    self.run_round()
            self.m_nxCtrl.ls_r(-1)
            self.m_nxCtrl.ls_u(-1)
            for cnt in range(20 * 5):
                self.m_nxCtrl.B()
                self.m_nxCtrl.pause(0.8)
                self.m_nxCtrl.ls_r(-1)
                self.m_nxCtrl.ls_u(-1)
            self.m_nxCtrl.pause(6.5)
            self.m_nxCtrl.release()
            # 列数+1
            self.m_CurCol = self.m_CurCol + 1
        print("Patch Egg Finished!!!")

    def run_round(self):
        self.m_nxCtrl.ls_l(-1)
        self.m_nxCtrl.ls_u(-1)
        self.m_nxCtrl.pause(5.6)
        self.m_nxCtrl.release()
        # back
        self.m_nxCtrl.ls_r(-1)
        self.m_nxCtrl.ls_u(-1)
        self.m_nxCtrl.pause(6.3)
        self.m_nxCtrl.release()

    def switch_2_box(self):
        self.m_nxCtrl.X()
        self.m_nxCtrl.pause(1)
        self.m_nxCtrl.A()
        self.m_nxCtrl.pause(2)
        self.m_nxCtrl.R()
        self.m_nxCtrl.pause(2)
        self.m_nxCtrl.Y()
        self.m_nxCtrl.pause(0.1)
        self.m_nxCtrl.Y()
        self.m_nxCtrl.pause(0.1)
        self.m_nxCtrl.l()
        self.m_nxCtrl.pause(0.1)

    def back_2_road(self):
        for i in range(3):
            self.m_nxCtrl.B(2)
            self.m_nxCtrl.pause(0.1)

    def move_2_follow(self):
        self.m_nxCtrl.r()
        self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.A()
        self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.u()
        self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.A()
        self.m_nxCtrl.pause(0.01)
        for i in range(self.m_CurCol + 1):
            self.m_nxCtrl.l()
            self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.d()
        self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.A()
        self.m_nxCtrl.pause(0.01)

    def move_2_box(self):
        self.m_nxCtrl.d()
        self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.A()
        self.m_nxCtrl.pause(0.01)
        for i in range(2):
            self.m_nxCtrl.u()
            self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.A()
        self.m_nxCtrl.pause(0.01)
        for i in range(self.m_CurCol):
            self.m_nxCtrl.r()
            self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.u()
        self.m_nxCtrl.pause(0.01)
        self.m_nxCtrl.A()
        self.m_nxCtrl.pause(0.01)

    def pick_egg(self):
        print(f"Picking {self.m_CurCol + 1}th egg(s)")
        self.switch_2_box()
        if self.m_CurCol != 0:
            self.move_2_box()
        if self.m_CurCol != 6:
            self.move_2_follow()
        self.back_2_road()

    def close_controller(self):
        self.m_nxCtrl.release()
        self.m_nxCtrl.close()
Ejemplo n.º 4
0
class TimeSkipper(object):
    """
	过帧控制,起始状态要在坑前定位
	"""
    def __init__(self, startDate, skipFrameNum):
        super(TimeSkipper, self).__init__()
        self.m_curDate = startDate
        self.m_skipFrameNum = skipFrameNum
        self.m_nxCtrl = Controller(printout=True)
        self.m_nxCtrl.LS()
        self.m_nxCtrl.pause(2)
        self.m_timeClickDuration = 0.005
        self.m_nxCtrl.buttondelay = 0.02

    def start_skip_frame(self):
        self.save(collectWatt=False)
        firstOpenTime = True
        for i in range(self.m_skipFrameNum):
            print("Current Skip = %s, Date = %s" % (i, self.m_curDate))
            self.skip_one_frame(firstOpenTime)
            firstOpenTime = False
            self.m_curDate = self.m_curDate + datetime.timedelta(days=1)
            # 1.1/4.1/8.1各保存一次,防崩溃
            if self.m_curDate.day == 1 and (self.m_curDate.month == 1
                                            or self.m_curDate.month == 4
                                            or self.m_curDate.month == 8):
                print("Save Date = %s" % self.m_curDate)
                self.save()
                firstOpenTime = True
        self.save()
        print("Skip Frame Finished!!!")

    def close_controller(self):
        self.m_nxCtrl.release()
        self.m_nxCtrl.close()

    def skip_one_frame(self, firstOpenTime=False):
        self.m_nxCtrl.A(0.15)
        self.m_nxCtrl.pause(0.1)
        self.skip_time_from_year(firstOpenTime)

    def skip_time_from_year(self, firstOpenTime=False):
        tmpDate = self.m_curDate + datetime.timedelta(days=1)
        # 跨年,年跳1
        if tmpDate.year > self.m_curDate.year:
            # 不是首次点开时间,要回退到年位置
            if not firstOpenTime:
                for i in range(5):
                    self.m_nxCtrl.l()
                    self.pause_skip_time()
                firstOpenTime = True
            self.m_nxCtrl.u()
            self.pause_skip_time()
        if firstOpenTime:
            self.m_nxCtrl.r()
            self.pause_skip_time()
        self.skip_time_from_month(firstOpenTime)

    def skip_time_from_month(self, firstOpenTime=False):
        # 跨月,月跳1
        lastMonthDay = self.last_day_of_month(self.m_curDate)
        if self.m_curDate.day == lastMonthDay.day:
            # 不是首次点开时间,回退到月位置
            if not firstOpenTime:
                for i in range(4):
                    self.m_nxCtrl.l()
                    self.pause_skip_time()
                firstOpenTime = True
            self.m_nxCtrl.u()
            self.pause_skip_time()
            # 补全由于月份跳动没有加到的日
            appendDay = 0
            if self.m_curDate.day == 28:
                appendDay = 3
            elif self.m_curDate.day == 29:
                appendDay = 2
            elif self.m_curDate.day == 30:
                appendDay = 1
            # 回到日位置
            if appendDay > 0:
                self.m_nxCtrl.r()
                self.pause_skip_time()
            # 日修正
            for i in range(appendDay):
                self.m_nxCtrl.u()
                self.pause_skip_time()
            # 回月位置
            if appendDay > 0:
                self.m_nxCtrl.l()
                self.pause_skip_time()
        if firstOpenTime:
            self.m_nxCtrl.r()
            self.pause_skip_time()
        self.skip_time_from_day(firstOpenTime)

    def skip_time_from_day(self, firstOpenTime=False):
        # 不是首次点开时间,要回退到月位置
        if not firstOpenTime:
            for i in range(3):
                self.m_nxCtrl.l()
                self.pause_skip_time()
            firstOpenTime = True
        # 日跳1
        self.m_nxCtrl.u()
        self.pause_skip_time()
        for i in range(3):
            self.m_nxCtrl.r()
            self.pause_skip_time()
        self.m_nxCtrl.A(0.15)
        self.m_nxCtrl.pause(0.1)

    def pause_skip_time(self):
        self.m_nxCtrl.pause(self.m_timeClickDuration)

    def save(self, collectWatt=True):
        # 回桌面进游戏
        self.m_nxCtrl.h(0.1)
        self.m_nxCtrl.pause(1)
        self.m_nxCtrl.A(0.1)
        self.m_nxCtrl.pause(2)
        # 收瓦特
        if collectWatt:
            self.collect_watt()
        # 保存
        self.m_nxCtrl.X(0.5)
        self.m_nxCtrl.pause(2)
        self.m_nxCtrl.R(0.5)
        self.m_nxCtrl.pause(2)
        self.m_nxCtrl.A(0.5)
        self.m_nxCtrl.pause(3)
        print("Save!!!")
        # 回桌面进时间界面
        self.m_nxCtrl.h(0.1)
        self.m_nxCtrl.pause(0.5)
        self.m_nxCtrl.d(0.1)
        self.m_nxCtrl.pause(0.5)
        for i in range(4):
            self.m_nxCtrl.r(0.1)
            self.m_nxCtrl.pause(0.05)
        self.m_nxCtrl.A(0.1)
        self.m_nxCtrl.pause(1)
        self.m_nxCtrl.d(-1)
        self.m_nxCtrl.pause(2)
        self.m_nxCtrl.release()
        self.m_nxCtrl.r(0.1)
        self.m_nxCtrl.pause(0.05)
        # 定位到时间上
        for i in range(4):
            self.m_nxCtrl.d(0.1)
            self.m_nxCtrl.pause(0.05)
        self.m_nxCtrl.A(0.1)
        self.m_nxCtrl.pause(0.5)
        for i in range(2):
            self.m_nxCtrl.d(0.1)
            self.m_nxCtrl.pause(0.05)

    def collect_watt(self):
        self.m_nxCtrl.A(0.1)
        self.m_nxCtrl.pause(2)
        for i in range(5):
            self.m_nxCtrl.B(0.1)
            self.m_nxCtrl.pause(1)

    def last_day_of_month(self, any_day):
        next_month = any_day.replace(day=28) + datetime.timedelta(
            days=4)  # this will never fail
        return next_month - datetime.timedelta(days=next_month.day)