def faces_on(self):
self.algo.Build()
from OCC.TopTools import TopTools_ListIteratorOfListOfShape
seen = set()
edge_list = self.algo.Modified(self.shp1)
itre = TopTools_ListIteratorOfListOfShape(edge_list)
while itre.More():
print(itre.Value())
itre.Next()
print('-')
edge_list = self.algo.Modified(self.shp2)
itre = TopTools_ListIteratorOfListOfShape(edge_list)
while itre.More():
print(itre.Value())
itre.Next()
# edge_list = self.algo.SectionEdges()
# itr = TopTools_ListIteratorOfListOfShape(edge_list)
# edge_list = self.algo.SectionEdges()
res = self.Shape()
itr = TopExp_Explorer(res, TopAbs_EDGE)
faces1, faces2 = [], []
while itr.More():
curr_edge = itr.Current()
s1_iter = TopExp_Explorer(self.shp1, TopAbs_FACE)
s2_iter = TopExp_Explorer(self.shp2, TopAbs_FACE)
while s1_iter.More():
curr_face1 = s1_iter.Current()
if self.algo.HasAncestorFaceOn1(curr_edge, curr_face1):
k, v = hash(curr_face1), hash(curr_edge)
if (k, v) not in seen:
seen.add((k, v))
faces1.append(curr_face1)
s1_iter.Next()
while s2_iter.More():
curr_face2 = s2_iter.Current()
if self.algo.HasAncestorFaceOn2(curr_edge, curr_face2):
k, v = hash(curr_face2), hash(curr_edge)
if (k, v) not in seen:
seen.add((k, v))
faces2.append(curr_face2)
s2_iter.Next()
# s2_iter.ReInit()
# s1_iter.ReInit()
itr.Next()
return faces1, faces2
def _loop_topo(self, edges=True):
if self.done:
self._reinitialize()
topologyType = topods_Edge if edges else topods_Vertex
seq = []
hashes = [] # list that stores hashes to avoid redundancy
occ_seq = TopTools_ListOfShape()
while self.wire_explorer.More():
# loop edges
if edges:
current_item = self.wire_explorer.Current()
# loop vertices
else:
current_item = self.wire_explorer.CurrentVertex()
current_item_hash = current_item.__hash__()
if not current_item_hash in hashes:
hashes.append(current_item_hash)
occ_seq.Append(current_item)
self.wire_explorer.Next()
# Convert occ_seq to python list
occ_iterator = TopTools_ListIteratorOfListOfShape(occ_seq)
while occ_iterator.More():
topo_to_add = topologyType(occ_iterator.Value())
seq.append(topo_to_add)
occ_iterator.Next()
self.done = True
return iter(seq)
def vertex_fillet(cube, vert):
# apply a fillet on incident edges on a vertex
afillet = BRepFilletAPI_MakeFillet(cube)
cnt = 0
# find edges from vertex
_map = TopTools_IndexedDataMapOfShapeListOfShape()
topexp_MapShapesAndAncestors(cube, TopAbs_VERTEX, TopAbs_EDGE, _map)
results = _map.FindFromKey(vert)
topology_iterator = TopTools_ListIteratorOfListOfShape(results)
while topology_iterator.More():
edge = topods_Edge(topology_iterator.Value())
topology_iterator.Next()
first, last = topexp_FirstVertex(edge), topexp_LastVertex(edge)
vertex, first_vert, last_vert = BRep_Tool().Pnt(vert), BRep_Tool().Pnt(
first), BRep_Tool().Pnt(last)
if edge.Orientation():
if not vertex.IsEqual(first_vert, 0.001):
afillet.Add(0, 20., edge)
else:
afillet.Add(20, 0, edge)
cnt += 1
afillet.Build()
if afillet.IsDone():
return afillet.Shape()
else:
raise AssertionError('you failed on me you fool!')
def map_face_before_and_after_feat(base, feature_maker):
'''
input
base: TopoDS_Shape
feature_maker: BRepFeat_MakePrism
output
fmap: {TopoDS_Face:TopoDS_Face}
'''
fmap = {}
base_faces = occ_utils.list_face(base)
for face in base_faces:
if feature_maker.IsDeleted(face):
continue
fmap[face] = []
modified = feature_maker.Modified(face)
if modified.IsEmpty():
fmap[face].append(face)
continue
occ_it = TopTools_ListIteratorOfListOfShape(modified)
while occ_it.More():
a_shape = occ_it.Value()
assert a_shape.ShapeType() == TopAbs_FACE
fmap[face].append(topods.Face(a_shape))
occ_it.Next()
return fmap
def _map_shapes_and_ancestors(self, topoTypeA, topoTypeB, topologicalEntity):
"""
using the same method
@param topoTypeA:
@param topoTypeB:
@param topologicalEntity:
"""
topo_set = set()
_map = TopTools_IndexedDataMapOfShapeListOfShape()
topexp_MapShapesAndAncestors(self.myShape, topoTypeA, topoTypeB, _map)
results = _map.FindFromKey(topologicalEntity)
if results.IsEmpty():
yield None
topology_iterator = TopTools_ListIteratorOfListOfShape(results)
while topology_iterator.More():
topo_entity = self.topoFactory[topoTypeB](topology_iterator.Value())
# return the entity if not in set
# to assure we're not returning entities several times
if not topo_entity in topo_set:
if self.ignore_orientation:
unique = True
for i in topo_set:
if i.IsSame(topo_entity):
unique = False
break
if unique:
yield topo_entity
else:
yield topo_entity
topo_set.add(topo_entity)
topology_iterator.Next()
def cut_solid_parts(array):
from OCC.Core.BRepAlgoAPI import BRepAlgoAPI_Section
from OCC.Core.BRepFeat import BRepFeat_SplitShape
from OCC.TopTools import TopTools_ListIteratorOfListOfShape
from OCC.Extend.TopologyUtils import TopologyExplorer
from OCC.Core.TopoDS import TopoDS_Face
#array contains several parts
for i, si in enumerate(array):
#for ki in si.dico:
shpi = si.solid
split = BRepFeat_SplitShape(shpi)
for j, sj in enumerate(array):
if i != j:
shpj = sj.solid
sect = BRepAlgoAPI_Section(shpi, shpj, False)
sect.ComputePCurveOn1(True)
sect.Approximation(True)
sect.SetFuzzyValue(1.e-12)
sect.Build()
shpsect = sect.Shape()
for edg in TopologyExplorer(shpsect).edges():
face = TopoDS_Face()
if sect.HasAncestorFaceOn1(edg, face):
split.Add(edg, face)
split.Build()
lst = TopTools_ListIteratorOfListOfShape(split.Modified(shpi))
while lst.More():
for face in TopologyExplorer(lst.Value()).faces():
array[i].splitsolid.append(face)
lst.Next()
def sortWiresByBuildOrder(wireList, plane, result=[]):
"""Tries to determine how wires should be combined into faces.
Assume:
The wires make up one or more faces, which could have 'holes'
Outer wires are listed ahead of inner wires
there are no wires inside wires inside wires
( IE, islands -- we can deal with that later on )
none of the wires are construction wires
Compute:
one or more sets of wires, with the outer wire listed first, and inner
ones
Returns, list of lists.
"""
# check if we have something to sort at all
if len(wireList) < 2:
return [
wireList,
]
# make a Face
face = Face.makeFromWires(wireList[0], wireList[1:])
# use FixOrientation
outer_inner_map = TopTools_DataMapOfShapeListOfShape()
sf = ShapeFix_Face(face.wrapped) # fix wire orientation
sf.FixOrientation(outer_inner_map)
# Iterate through the Inner:Outer Mapping
all_wires = face.Wires()
result = {
w: outer_inner_map.Find(w.wrapped)
for w in all_wires if outer_inner_map.IsBound(w.wrapped)
}
# construct the result
rv = []
for k, v in result.items():
tmp = [
k,
]
iterator = TopTools_ListIteratorOfListOfShape(v)
while iterator.More():
tmp.append(Wire(iterator.Value()))
iterator.Next()
rv.append(tmp)
return rv
def __getitem__(self, item: TopoDS_Shape) -> List[TopoDS_Shape]:
seen = set()
res = []
results = self._map.FindFromKey(item)
if results.IsEmpty():
return res
topology_iterator = TopTools_ListIteratorOfListOfShape(results)
while topology_iterator.More():
topo_entity = self.topoFactory[self._target_type](topology_iterator.Value())
# return the entity if not in set
# to assure we're not returning entities several times
if not hash(topo_entity) in seen:
res.append(topo_entity)
seen.add(hash(topo_entity))
topology_iterator.Next()
return res
def _number_shapes_ancestors(self, topoTypeA, topoTypeB, topologicalEntity):
"""returns the number of shape ancestors
If you want to know how many edges a faces has:
_number_shapes_ancestors(self, TopAbs_EDGE, TopAbs_FACE, edg)
will return the number of edges a faces has
@param topoTypeA:
@param topoTypeB:
@param topologicalEntity:
"""
topo_set = set()
_map = TopTools_IndexedDataMapOfShapeListOfShape()
topexp_MapShapesAndAncestors(self.myShape, topoTypeA, topoTypeB, _map)
results = _map.FindFromKey(topologicalEntity)
if results.IsEmpty():
return None
topology_iterator = TopTools_ListIteratorOfListOfShape(results)
while topology_iterator.More():
topo_set.add(topology_iterator.Value())
topology_iterator.Next()
return len(topo_set)
def _loop_topo(self,
topologyType,
topologicalEntity=None,
topologyTypeToAvoid=None):
'''
this could be a faces generator for a python TopoShape class
that way you can just do:
for face in srf.faces:
processFace(face)
'''
topoTypes = {
TopAbs_VERTEX: TopoDS_Vertex,
TopAbs_EDGE: TopoDS_Edge,
TopAbs_FACE: TopoDS_Face,
TopAbs_WIRE: TopoDS_Wire,
TopAbs_SHELL: TopoDS_Shell,
TopAbs_SOLID: TopoDS_Solid,
TopAbs_COMPOUND: TopoDS_Compound,
TopAbs_COMPSOLID: TopoDS_CompSolid
}
assert topologyType in topoTypes.keys(), '%s not one of %s' % (
topologyType, topoTypes.keys())
self.topExp = TopExp_Explorer()
# use self.myShape if nothing is specified
if topologicalEntity is None and topologyTypeToAvoid is None:
self.topExp.Init(self.myShape, topologyType)
elif topologicalEntity is None and topologyTypeToAvoid is not None:
self.topExp.Init(self.myShape, topologyType, topologyTypeToAvoid)
elif topologyTypeToAvoid is None:
self.topExp.Init(topologicalEntity, topologyType)
elif topologyTypeToAvoid:
self.topExp.Init(topologicalEntity, topologyType,
topologyTypeToAvoid)
seq = []
hashes = [] # list that stores hashes to avoid redundancy
occ_seq = TopTools_ListOfShape()
while self.topExp.More():
current_item = self.topExp.Current()
current_item_hash = current_item.__hash__()
if not current_item_hash in hashes:
hashes.append(current_item_hash)
occ_seq.Append(current_item)
self.topExp.Next()
# Convert occ_seq to python list
occ_iterator = TopTools_ListIteratorOfListOfShape(occ_seq)
while occ_iterator.More():
topo_to_add = self.topoFactory[topologyType](occ_iterator.Value())
seq.append(topo_to_add)
occ_iterator.Next()
if self.ignore_orientation:
# filter out those entities that share the same TShape
# but do *not* share the same orientation
filter_orientation_seq = []
for i in seq:
_present = False
for j in filter_orientation_seq:
if i.IsSame(j):
_present = True
break
if _present is False:
filter_orientation_seq.append(i)
return filter_orientation_seq
else:
return iter(seq)
#!/usr/bin/env python