def project_point_on_curve():
'''
'''
point_to_project = gp_Pnt(1., 2., 3.)
radius = 5.
# create a circle, centered at origin with a given radius
circle = Geom_Circle(gp_XOY(), radius)
display.DisplayShape(circle)
display.DisplayShape(point_to_project, update=True)
display.DisplayMessage(point_to_project, "P")
# project the point P on the circle
projection = GeomAPI_ProjectPointOnCurve(point_to_project, circle)
# get the results of the projection
# the point
projected_point = projection.NearestPoint()
# the number of possible results
nb_results = projection.NbPoints()
print("NbResults : %i" % nb_results)
pstring = "N : at Distance : %f" % projection.LowerDistance()
display.DisplayMessage(projected_point, pstring)
# thre maybe many different possible solutions
if nb_results > 0:
for i in range(1, nb_results + 1):
Q = projection.Point(i)
distance = projection.Distance(i)
pstring = "Q%i: at Distance :%f" % (i, distance)
display.DisplayShape(Q)
display.DisplayMessage(Q, pstring)
def clone_tooth(base_shape):
clone = gp_Trsf()
grouped_shape = base_shape
# Find a divisor, between 1 and 8, for the number_of teeth
multiplier = 1
max_multiplier = 1
for i in range(0, 8):
if num_teeth % multiplier == 0:
max_multiplier = i + 1
multiplier = max_multiplier
for i in range(1, multiplier):
clone.SetRotation(gp_OZ(), -i * tooth_angle)
rotated_shape = BRepBuilderAPI_Transform(base_shape, clone, True).Shape()
grouped_shape = BRepAlgoAPI_Fuse(grouped_shape, rotated_shape).Shape()
# Rotate the basic tooth and fuse together
aggregated_shape = grouped_shape
for i in range(1, int(num_teeth / multiplier)):
clone.SetRotation(gp_OZ(), - i * multiplier * tooth_angle)
rotated_shape = BRepBuilderAPI_Transform(grouped_shape, clone, True).Shape()
aggregated_shape = BRepAlgoAPI_Fuse(aggregated_shape, rotated_shape).Shape()
cylinder = BRepPrimAPI_MakeCylinder(gp_XOY(),
top_radius - roller_diameter,
thickness)
aggregated_shape = BRepAlgoAPI_Fuse(aggregated_shape,
cylinder.Shape()).Shape()
return aggregated_shape
def points_from_intersection():
'''
@param display:
'''
plane = gp_Pln(gp_Ax3(gp_XOY()))
minor_radius, major_radius = 5., 8.
ellips = gp_Elips(gp_YOZ(), major_radius, minor_radius)
intersection = IntAna_IntConicQuad(ellips, plane, precision_Angular(),
precision_Confusion())
a_plane = GC_MakePlane(plane).Value()
a_surface = Geom_RectangularTrimmedSurface(a_plane, -8., 8., -12., 12.,
True, True)
display.DisplayShape(a_surface, update=True)
anEllips = GC_MakeEllipse(ellips).Value()
display.DisplayShape(anEllips)
if intersection.IsDone():
nb_results = intersection.NbPoints()
if nb_results > 0:
for i in range(1, nb_results + 1):
P = intersection.Point(i)
pstring = "P%i" % i
display.DisplayShape(P)
display.DisplayMessage(P, pstring)
def draft_angle(event=None):
S = BRepPrimAPI_MakeBox(200., 300., 150.).Shape()
adraft = BRepOffsetAPI_DraftAngle(S)
topExp = TopExp_Explorer()
topExp.Init(S, TopAbs_FACE)
while topExp.More():
face = topods_Face(topExp.Current())
surf = Geom_Plane.DownCast(BRep_Tool_Surface(face))
dirf = surf.Pln().Axis().Direction()
ddd = gp_Dir(0, 0, 1)
if dirf.IsNormal(ddd, precision_Angular()):
adraft.Add(face, ddd, math.radians(15), gp_Pln(gp_Ax3(gp_XOY())))
topExp.Next()
adraft.Build()
display.DisplayShape(adraft.Shape(), update=True)
def round_tooth(wedge):
round_x = 2.6
round_z = 0.06 * pitch
round_radius = pitch
# Determine where the circle used for rounding has to start and stop
p2d_1 = gp_Pnt2d(top_radius - round_x, 0)
p2d_2 = gp_Pnt2d(top_radius, round_z)
# Construct the rounding circle
round_circle = GccAna_Circ2d2TanRad(p2d_1, p2d_2, round_radius, 0.01)
if (round_circle.NbSolutions() != 2):
sys.exit(-2)
round_circle_2d_1 = round_circle.ThisSolution(1)
round_circle_2d_2 = round_circle.ThisSolution(2)
if (round_circle_2d_1.Position().Location().Coord()[1] >= 0):
round_circle_2d = round_circle_2d_1
else:
round_circle_2d = round_circle_2d_2
# Remove the arc used for rounding
trimmed_circle = GCE2d_MakeArcOfCircle(round_circle_2d, p2d_1, p2d_2).Value()
# Calculate extra points used to construct lines
p1 = gp_Pnt(p2d_1.X(), 0, p2d_1.Y())
p2 = gp_Pnt(p2d_2.X(), 0, p2d_2.Y())
p3 = gp_Pnt(p2d_2.X() + 1, 0, p2d_2.Y())
p4 = gp_Pnt(p2d_2.X() + 1, 0, p2d_1.Y() - 1)
p5 = gp_Pnt(p2d_1.X(), 0, p2d_1.Y() - 1)
# Convert the arc and four extra lines into 3D edges
plane = gp_Pln(gp_Ax3(gp_Origin(), gp_DY().Reversed(), gp_DX()))
arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_circle, plane)).Edge()
lin1 = BRepBuilderAPI_MakeEdge(p2, p3).Edge()
lin2 = BRepBuilderAPI_MakeEdge(p3, p4).Edge()
lin3 = BRepBuilderAPI_MakeEdge(p4, p5).Edge()
lin4 = BRepBuilderAPI_MakeEdge(p5, p1).Edge()
# Make a wire composed of the edges
round_wire = BRepBuilderAPI_MakeWire(arc1)
round_wire.Add(lin1)
round_wire.Add(lin2)
round_wire.Add(lin3)
round_wire.Add(lin4)
# Turn the wire into a face
round_face = BRepBuilderAPI_MakeFace(round_wire.Wire()).Shape()
# Revolve the face around the Z axis over the tooth angle
rounding_cut_1 = BRepPrimAPI_MakeRevol(round_face, gp_OZ(), tooth_angle).Shape()
# Construct a mirrored copy of the first cutting shape
mirror = gp_Trsf()
mirror.SetMirror(gp_XOY())
mirrored_cut_1 = BRepBuilderAPI_Transform(rounding_cut_1, mirror, True).Shape()
# and translate it so that it ends up on the other side of the wedge
translate = gp_Trsf()
translate.SetTranslation(gp_Vec(0, 0, thickness))
rounding_cut_2 = BRepBuilderAPI_Transform(mirrored_cut_1, translate, False).Shape()
# Cut the wedge using the first and second cutting shape
cut_1 = BRepAlgoAPI_Cut(wedge, rounding_cut_1).Shape()
cut_2 = BRepAlgoAPI_Cut(cut_1, rounding_cut_2).Shape()
return cut_2
##the Free Software Foundation, either version 3 of the License, or
##(at your option) any later version.
##
##pythonOCC is distributed in the hope that it will be useful,
##but WITHOUT ANY WARRANTY; without even the implied warranty of
##MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
##GNU Lesser General Public License for more details.
##
##You should have received a copy of the GNU Lesser General Public License
##along with pythonOCC. If not, see <http://www.gnu.org/licenses/>.
from math import pi
from OCCT.gp import gp_Pnt2d, gp_XOY, gp_Lin2d, gp_Ax3, gp_Dir2d
from OCCT.BRepBuilderAPI import BRepBuilderAPI_MakeEdge
from OCCT.Geom import Geom_CylindricalSurface
from OCCT.GCE2d import GCE2d_MakeSegment
from OCC.Display.WebGl import threejs_renderer
# First buil an helix
aCylinder = Geom_CylindricalSurface(gp_Ax3(gp_XOY()), 6.0)
aLine2d = gp_Lin2d(gp_Pnt2d(0.0, 0.0), gp_Dir2d(1.0, 1.0))
aSegment = GCE2d_MakeSegment(aLine2d, 0.0, pi * 2.0)
helix_edge = BRepBuilderAPI_MakeEdge(aSegment.Value(), aCylinder, 0.0,
6.0 * pi).Edge()
display = threejs_renderer.ThreejsRenderer()
display.DisplayShape(helix_edge, color=(1, 0, 0), line_width=1.)
display.render()