class OpTestSystem():
## Initialize this object
# @param i_bmcIP The IP address of the BMC
# @param i_bmcUser The userid to log into the BMC with
# @param i_bmcPasswd The password of the userid to log into the BMC with
# @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
# @param i_bmcPasswdIpmi The password of BMC IPMI userid
# @param i_ffdcDir Optional param to indicate where to write FFDC
#
# "Only required for inband tests" else Default = None
# @param i_lparIP The IP address of the LPAR
# @param i_lparuser The userid to log into the LPAR
# @param i_lparPasswd The password of the userid to log into the LPAR with
#
def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi,i_bmcPasswdIpmi,i_ffdcDir=None, i_lparip=None,
i_lparuser=None, i_lparPasswd=None):
self.cv_BMC = OpTestBMC(i_bmcIP,i_bmcUser,i_bmcPasswd,i_ffdcDir)
self.cv_IPMI = OpTestIPMI(i_bmcIP,i_bmcUserIpmi,i_bmcPasswdIpmi,
i_ffdcDir)
self.cv_LPAR = OpTestLpar(i_lparip, i_lparuser, i_lparPasswd)
self.util = OpTestUtil()
############################################################################
# System Interfaces
############################################################################
##
# @brief Clear all System Event Log in the System
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_sel_clear(self):
try:
rc = self.cv_IPMI.ipmi_sel_clear()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
##
# @brief Power on the system
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_power_on(self):
try:
rc = self.cv_IPMI.ipmi_power_on()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
##
# @brief Power soft the system
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_power_soft(self):
try:
rc = self.cv_IPMI.ipmi_power_soft()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
##
# @brief Power off the system
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_power_off(self):
try:
rc = self.cv_IPMI.ipmi_power_off()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
##
# @brief Warm reset on the bmc system
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_warm_reset(self):
try:
rc = self.cv_IPMI.ipmi_warm_reset()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
##
# @brief Wait for boot to end based on serial over lan output data
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_ipl_wait_for_working_state(self,i_timeout=10):
try:
rc = self.cv_IPMI.ipl_wait_for_working_state(i_timeout)
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
##
# @brief Check for error during IPL that would result in test case failure
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_sel_check(self,i_string):
try:
rc = self.cv_IPMI.ipmi_sel_check(i_string)
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
##
# @Get data from apss
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_apss_get(self):
try:
rc = self.cv_IPMI.ipmi_apss_get()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
##
# @brief get all SDR's in the System
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_sdr_get(self):
try:
rc = self.cv_IPMI.ipmi_sdr_get()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return rc
############################################################################
# BMC Interfaces
############################################################################
##
# @brief Reboot the BMC
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_bmc_reboot(self):
try:
rc = self.cv_BMC.reboot()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return BMC_CONST.FW_SUCCESS
##
# @brief Update the BMC fw image using hpm file
#
# @param i_image HPM file image including location
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_bmc_outofband_fw_update_hpm(self,i_image):
try:
self.cv_IPMI.ipmi_power_off()
self.cv_IPMI.ipmi_preserve_network_setting()
self.cv_IPMI.ipmi_code_update(i_image, BMC_CONST.BMC_FW_IMAGE_UPDATE)
self.cv_IPMI.ipmi_power_on()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return BMC_CONST.FW_SUCCESS
##
# @brief Update the BMC pnor image using hpm file
#
# @param i_image HPM file image including location
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_bmc_outofband_pnor_update_hpm(self,i_image):
try:
self.cv_IPMI.ipmi_power_off()
self.cv_IPMI.ipmi_preserve_network_setting()
self.cv_IPMI.ipmi_code_update(i_image, BMC_CONST.BMC_PNOR_IMAGE_UPDATE)
self.cv_IPMI.ipmi_power_on()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return BMC_CONST.FW_SUCCESS
##
# @brief Update the BMC fw and pnor image using hpm file
#
# @param i_image HPM file image including location
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_bmc_outofband_fwandpnor_update_hpm(self,i_image):
try:
self.cv_IPMI.ipmi_power_off()
self.cv_IPMI.ipmi_preserve_network_setting()
self.cv_IPMI.ipmi_code_update(i_image,BMC_CONST.BMC_FWANDPNOR_IMAGE_UPDATE)
self.cv_IPMI.ipmi_power_on()
except OpTestError as e:
return BMC_CONST.FW_FAILED
return BMC_CONST.FW_SUCCESS
##
# @brief Update the BMC fw using hpm file using LPAR
#
# @param i_image HPM file image including location
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_bmc_inband_fw_update_hpm(self,i_image):
try:
self.sys_bmc_validate_lpar()
self.cv_IPMI.ipmi_cold_reset()
self.cv_IPMI.ipmi_preserve_network_setting()
self.cv_LPAR.lpar_code_update(i_image, BMC_CONST.BMC_FW_IMAGE_UPDATE)
except OpTestError as e:
return BMC_CONST.FW_FAILED
return BMC_CONST.FW_SUCCESS
##
# @brief Update the BMC pnor using hpm file using LPAR
#
# @param i_image HPM file image including location
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_bmc_inband_pnor_update_hpm(self,i_image):
try:
self.sys_bmc_validate_lpar()
self.cv_IPMI.ipmi_cold_reset()
self.cv_IPMI.ipmi_preserve_network_setting()
self.cv_LPAR.lpar_code_update(i_image, BMC_CONST.BMC_PNOR_IMAGE_UPDATE)
except OpTestError as e:
return BMC_CONST.FW_FAILED
return BMC_CONST.FW_SUCCESS
##
# @brief Update the BMC fw and pnor using hpm file using LPAR
#
# @param i_image HPM file image including location
#
# @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
#
def sys_bmc_inband_fwandpnor_update_hpm(self,i_image):
try:
self.sys_bmc_validate_lpar()
self.cv_IPMI.ipmi_cold_reset()
self.cv_IPMI.ipmi_preserve_network_setting()
self.cv_LPAR.lpar_code_update(i_image, BMC_CONST.BMC_FWANDPNOR_IMAGE_UPDATE)
except OpTestError as e:
return BMC_CONST.FW_FAILED
return BMC_CONST.FW_SUCCESS
##
# @brief Validates the partition and waits for partition to connect
# important to perform before all inband communications
#
# @return BMC_CONST.FW_SUCCESS raises OpTestError when failed
#
def sys_bmc_validate_lpar(self):
# Check to see if lpar credentials are present
if(self.cv_LPAR.ip == None):
l_msg = "Partition credentials not provided"
print l_msg
raise OpTestError(l_msg)
# Check if partition is active
try:
self.util.PingFunc(self.cv_LPAR.ip)
except OpTestError as e:
self.cv_IPMI.ipmi_power_off()
self.cv_IPMI.ipmi_power_on()
self.util.PingFunc(self.cv_LPAR.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
print 'Partition is pinging'
return BMC_CONST.FW_SUCCESS
