def __init__(self, parent=None):
parameters = [
[[PropertyPanel, "Port", device, "COMM"], {
"refresh_period": 1.0
}],
[[PropertyPanel, "Nom. update rate", device, "SCAN"], {
"format": "%.3f",
"unit": "s",
"refresh_period": 1.0
}],
[[PropertyPanel, "Act. update rate", device, "SCANT"], {
"format": "%.3f",
"unit": "s",
"refresh_period": 1.0
}],
]
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title=self.title,
parameters=parameters,
standard_view=self.standard_view,
subname=True,
)
def __init__(self,parent=None):
Xray_Beam_Position_Check.__init__(self)
parameters = [
[[BeamProfile, "Image", self ],{}],
[[TweakPanel, "Saturation level", self,"saturation_level" ],{"digits":0}],
[[PropertyPanel,"Image timestamp", self,"image_timestamp" ],{"type":"date","read_only":True}],
[[PropertyPanel,"Image usable", self,"image_OK" ],{"type":"Unusable/OK","read_only":True}],
[[PropertyPanel,"Overloaded pixels", self,"image_overloaded" ],{"read_only":True}],
[[PropertyPanel,"Signal-to-noise ratio", self,"SNR" ],{"digits":1,"read_only":True}],
[[PropertyPanel,"X Beam [mm]", self,"x_beam" ],{"digits":3,"read_only":True}],
[[PropertyPanel,"Y Beam [mm]", self,"y_beam" ],{"digits":3,"read_only":True}],
[[PropertyPanel,"X Error [mm]", self,"x_error" ],{"digits":3,"read_only":True}],
[[PropertyPanel,"Y Error [mm]", self,"y_error" ],{"digits":3,"read_only":True}],
[[PropertyPanel,"X Beam avg. [mm]", self,"x_average" ],{"digits":3,"read_only":True}],
[[PropertyPanel,"Y Beam avg. [mm]", self,"y_average" ],{"digits":3,"read_only":True}],
[[TweakPanel, "X [mrad]", self,"x_control" ],{"digits":4}],
[[TweakPanel, "Y [V]", self,"y_control" ],{"digits":4}],
[[PropertyPanel,"X Corr. [mrad]", self,"x_control_corrected"],{"digits":4,"read_only":True}],
[[PropertyPanel,"Y Corr. [V]", self,"y_control_corrected"],{"digits":4,"read_only":True}],
[[TogglePanel, "Acquire Image", self,"acquire_image_running"],{"type":"Start/Cancel"}],
[[ButtonPanel, "Correction", self,"apply_correction" ],{"label":"Apply"}],
[[ButtonPanel, "X Correction", self,"apply_x_correction" ],{"label":"Apply"}],
[[ButtonPanel, "Y Correction", self,"apply_y_correction" ],{"label":"Apply"}],
]
BasePanel.__init__(self,
parent=parent,
name=self.name,
title=self.title,
parameters=parameters,
standard_view=self.standard_view,
subpanels=[Settings],
)
def __init__(self,parent=None):
BasePanel.__init__(self,
parent=parent,
name=self.name,
title=self.title,
icon="Tool",
parameters=self.parameters,
standard_view=self.standard_view,
)
def __init__(self, parent=None):
Xray_Beam_Check.__init__(self)
parameters = [
[[
PropertyPanel, "Timing System", self,
"timing_system_ip_address"
], {}],
[[PropertyPanel, "Oscilloscope", self, "scope_ip_address"], {}],
[[PropertyPanel, "X1 Motor", self, "x1_motor"], {}],
[[PropertyPanel, "X2 Motor", self, "x2_motor"], {}],
[[PropertyPanel, "Y Motor", self, "y_motor"], {}],
[[TweakPanel, "X Resolution [mrad]", self, "x_resolution"], {
"digits": 4
}],
[[TweakPanel, "Y Resolution [V]", self, "y_resolution"], {
"digits": 4
}],
[[TweakPanel, "X Scan Step [mrad]", self, "dx_scan"], {
"digits": 4
}],
[[TweakPanel, "Y Scan Step [V]", self, "dy_scan"], {
"digits": 4
}],
[[PropertyPanel, "X Aperture Motor", self, "x_aperture_motor"],
{}],
[[PropertyPanel, "Y Aperture Motor", self, "y_aperture_motor"],
{}],
[[TweakPanel, "X Aperture [mm]", self, "x_aperture"], {
"digits": 4
}],
[[TweakPanel, "Y Aperture [mm]", self, "y_aperture"], {
"digits": 4
}],
[[TweakPanel, "X Aperture (scan) [mm]", self, "x_aperture_scan"], {
"digits": 4
}],
[[TweakPanel, "Y Aperture (scan) [mm]", self, "y_aperture_scan"], {
"digits": 4
}],
[[TweakPanel, "X Aperture (norm) [mm]", self, "x_aperture_norm"], {
"digits": 4
}],
[[TweakPanel, "Y Aperture (norm) [mm]", self, "y_aperture_norm"], {
"digits": 4
}],
]
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title=self.title,
parameters=parameters,
standard_view=self.standard_view,
subname=False,
)
def __init__(self, parent=None):
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title=self.title,
layout=self.layout,
standard_view=self.standard_view,
label_width=170,
icon="BioCARS",
)
def __init__(self,parent=None):
BasePanel.__init__(self,
parent=parent,
name=self.name,
title=self.title,
parameters=self.parameters,
standard_view=self.standard_view,
subname=True,
refresh=True,
live=True,
label_width=90,
)
def __init__(self, parent=None):
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title=self.title,
parameters=self.parameters,
standard_view=self.standard_view,
refresh=True,
live=True,
label_width=90,
icon="Omega Thermocouple Reader",
)
def __init__(self, parent=None):
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title=self.title,
parameters=self.parameters,
standard_view=self.standard_view,
label_width=90,
refresh=True,
live=True,
)
self.Bind(wx.EVT_CLOSE, self.OnClose)
def __init__(self,parent=None,update=lambda: None):
from Panel import PropertyPanel
BasePanel.__init__(self,parent=parent,
name=self.name,
title=self.title,
icon=self.icon,
component=PropertyPanel,
parameters=self.parameters,
standard_view=self.standard_view,
label_width=250,
refresh=True,
live=True,
)
def __init__(self,parent=None):
BasePanel.__init__(self,
parent=parent,
name=self.name,
title=self.title,
icon="ADXV",
parameters=self.parameters,
standard_view=self.standard_view,
label_width=140,
width=260,
refresh=False,
live=False,
)
self.Bind(wx.EVT_CLOSE,self.OnClose)
def __init__(self, parent=None):
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title=self.title,
icon="Rayonix Detector",
parameters=self.parameters,
standard_view=self.standard_view,
label_width=180,
refresh=False,
live=False,
)
self.Bind(wx.EVT_CLOSE, self.OnClose)
rayonix_detector.limit_files_enabled = True
def __init__(self,PV,parent=None):
from channel_archiver import channel_archiver
log = channel_archiver.logfile(PV)
parameters = [
[[TimeChart,"Data",log,"date time","value"],{"refresh_period":2}],
]
BasePanel.__init__(self,
name=self.name,
title=self.title,
icon="Archiver",
parent=parent,
parameters=parameters,
standard_view=self.standard_view,
refresh=False,
live=False,
)
def __init__(self, parent=None):
parameters = [
[[PropertyPanel, "RF output", device, "VAL"], {
"type": "OFF/ON",
"refresh_period": 1.0
}],
[[PropertyPanel, "Scan Time", device, "SCAN"], {
"unit": "s",
"refresh_period": 1.0
}],
]
BasePanel.__init__(
self,
parent=parent,
name=self.name,
icon=self.icon,
title=self.title,
parameters=parameters,
standard_view=self.standard_view,
subname=True,
subpanels=[SettingsPanel],
)
def __init__(self,parent=None):
Xray_Beam_Position_Check.__init__(self)
parameters = [
[[PropertyPanel,"Timing System", self,"timing_system_ip_address"],{}],
[[PropertyPanel,"X1 Motor", self,"x1_motor" ],{}],
[[PropertyPanel,"X2 Motor", self,"x2_motor" ],{}],
[[PropertyPanel,"Y Motor", self,"y_motor" ],{}],
##[[TweakPanel, "X Resolution [mrad]",self,"x_resolution" ],{"digits":4}],
##[[TweakPanel, "Y Resolution [V]", self,"y_resolution" ],{"digits":4}],
[[PropertyPanel,"X Aperture Motor", self,"x_aperture_motor" ],{}],
[[PropertyPanel,"Y Aperture Motor", self,"y_aperture_motor" ],{}],
[[TweakPanel, "X Aperture [mm]", self,"x_aperture" ],{"digits":4}],
[[TweakPanel, "Y Aperture [mm]", self,"y_aperture" ],{"digits":4}],
[[TweakPanel, "X Aperture (scan) [mm]",self,"x_aperture_scan"],{"digits":4}],
[[TweakPanel, "Y Aperture (scan) [mm]",self,"y_aperture_scan"],{"digits":4}],
[[TweakPanel, "X Aperture (norm) [mm]",self,"x_aperture_norm"],{"digits":4}],
[[TweakPanel, "Y Aperture (norm) [mm]",self,"y_aperture_norm"],{"digits":4}],
[[TweakPanel, "Calibration X [mrad/mm]",self,"x_gain" ],{"digits":4}],
[[TweakPanel, "Calibration Y [V/mm]", self,"y_gain" ],{"digits":4}],
[[PropertyPanel,"History Length", self,"history_length" ],{}],
[[TweakPanel, "Average count", self,"average_samples" ],{"digits":0}],
[[TweakPanel, "ROI center X [mm]", self,"x_ROI_center" ],{"digits":3}],
[[TweakPanel, "ROI center Y [mm]", self,"y_ROI_center" ],{"digits":3}],
[[TweakPanel, "ROI width [mm]", self,"ROI_width" ],{"digits":3}],
[[TweakPanel, "Nominal X [mm]", self,"x_nominal" ],{"digits":3}],
[[TweakPanel, "Nominal Y [mm]", self,"y_nominal" ],{"digits":3}],
[[PropertyPanel,"Image filename", self,"image_filename" ],{"read_only":True}],
]
BasePanel.__init__(self,
parent=parent,
name=self.name,
title=self.title,
parameters=parameters,
standard_view=self.standard_view,
subname=True,
)
def __init__(self,parent=None):
from Panel import PropertyPanel
from Timing_Setup_Panel import Timing_Setup_Panel
from Timing_Channel_Configuration_Panel import Timing_Channel_Configuration_Panel
from Timing_Calibration_Panel import Timing_Calibration_Panel
from Timing_Clock_Configuration_Panel import Timing_Clock_Configuration_Panel
from PP_Modes_Panel import PP_Modes_Panel
from Sequence_Modes_Panel import Sequence_Modes_Panel
from Timing_Configuration_Panel import Timing_Configuration_Panel
BasePanel.__init__(self,parent=parent,
name=self.name,
title=self.title,
icon=self.icon,
component=PropertyPanel,
parameters=self.parameters,
standard_view=self.standard_view,
label_width=180,
refresh=True,
live=True,
subpanels=[
["Setup...", Timing_Setup_Panel],
["Channel Configuration...",Timing_Channel_Configuration_Panel],
["Calibration...", Timing_Calibration_Panel],
["Clock Configuration...", Timing_Clock_Configuration_Panel],
["PP Modes...", PP_Modes_Panel],
["Sequence Modes...", Sequence_Modes_Panel],
["Configuration...", Timing_Configuration_Panel],
],
buttons=[
["Cal..",Timing_Calibration_Panel],
["Conf..",Timing_Channel_Configuration_Panel],
["Setup..",Timing_Setup_Panel],
["Modes..",PP_Modes_Panel],
],
)
def __init__(self, parent=None):
Xray_Beam_Check.__init__(self)
parameters = [
[[PropertyPanel, "Timing Mode", self.settings, "timing_mode"], {
"choices": self.settings.timing_modes
}],
[[PropertyPanel, "Beamline Mode", self.settings, "beamline_mode"],
{
"choices": self.settings.beamline_modes
}],
[[
TimeChart, "X Control History", self.log, "date time",
"x_control"
], {
"axis_label": "Control X [mrad]",
"name": self.name + ".TimeChart"
}],
[[
TimeChart, "Y Control History", self.log, "date time",
"y_control"
], {
"axis_label": "Control Y [V]",
"name": self.name + ".TimeChart"
}],
[[PropertyPanel, "Logfile", self.log, "filename"], {}],
[[TweakPanel, "X [mrad]", self, "x_control"], {
"digits": 4
}],
[[TweakPanel, "Y [V]", self, "y_control"], {
"digits": 4
}],
[[PropertyPanel, "X Corr. [mrad]", self, "x_control_corrected"], {
"digits": 4,
"read_only": True
}],
[[PropertyPanel, "Y Corr. [V]", self, "y_control_corrected"], {
"digits": 4,
"read_only": True
}],
[[TogglePanel, "X Scan", self, "x_scan_running"], {
"type": "Start/Cancel"
}],
[[TogglePanel, "Y Scan", self, "y_scan_running"], {
"type": "Start/Cancel"
}],
[[ButtonPanel, "X Correction", self, "apply_x_correction"], {
"label": "Apply"
}],
[[ButtonPanel, "Y Correction", self, "apply_y_correction"], {
"label": "Apply"
}],
]
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title=self.title,
parameters=parameters,
standard_view=self.standard_view,
subpanels=[Settings],
)
def __init__(self, parent=None):
Xray_Beam_Stabilization.__init__(self)
parameters = [
[[BeamProfile, "Image", self], {}],
[[TimeChart, "History X", self.log, "date time", "x"], {
"axis_label": "X [mm]",
"name": self.name + ".TimeChart"
}],
[[TimeChart, "History Y", self.log, "date time", "y"], {
"axis_label": "Y [mm]",
"name": self.name + ".TimeChart"
}],
[[
TimeChart, "History Control X", self.log, "date time",
"x_control"
], {
"axis_label": "Control X [mrad]",
"name": self.name + ".TimeChart"
}],
[[
TimeChart, "History Control Y", self.log, "date time",
"y_control"
], {
"axis_label": "Control Y [V]",
"name": self.name + ".TimeChart"
}],
[[PropertyPanel, "History Length", self, "history_length"], {}],
[[PropertyPanel, "History filter", self, "history_filter"], {
"choices": ["", "1pulses", "5pulses"]
}],
[[PropertyPanel, "Logfile", self.log, "filename"], {}],
[[PropertyPanel, "Image filename", self, "image_basename"], {
"read_only": True
}],
[[PropertyPanel, "Image timestamp", self, "image_timestamp"], {
"type": "date",
"read_only": True
}],
[[PropertyPanel, "Analysis filter", self, "analysis_filter"], {
"choices": ["", "1pulses", "5pulses"]
}],
[[PropertyPanel, "Image usable", self, "image_OK"], {
"type": "Unusable/OK",
"read_only": True
}],
[[PropertyPanel, "Overloaded pixels", self, "image_overloaded"], {
"read_only": True
}],
[[PropertyPanel, "Signal-to-noise ratio", self, "SNR"], {
"digits": 1,
"read_only": True
}],
[[TogglePanel, "Auto update", self, "auto_update"], {
"type": "Off/On"
}],
[[TweakPanel, "Average count", self, "average_samples"], {
"digits": 0
}],
[[TweakPanel, "ROI center X [mm]", self, "x_ROI_center"], {
"digits": 3
}],
[[TweakPanel, "ROI center Y [mm]", self, "y_ROI_center"], {
"digits": 3
}],
[[TweakPanel, "ROI width [mm]", self, "ROI_width"], {
"digits": 3
}],
[[TweakPanel, "Saturation level", self, "saturation_level"], {
"digits": 0
}],
[[TweakPanel, "Nominal X [mm]", self, "x_nominal"], {
"digits": 3
}],
[[TweakPanel, "Nominal Y [mm]", self, "y_nominal"], {
"digits": 3
}],
[[PropertyPanel, "Beam X [mm]", self, "x_beam"], {
"digits": 3,
"read_only": True
}],
[[PropertyPanel, "Beam Y [mm]", self, "y_beam"], {
"digits": 3,
"read_only": True
}],
[[PropertyPanel, "Beam X avg. [mm]", self, "x_average"], {
"digits": 3,
"read_only": True
}],
[[PropertyPanel, "Beam Y avg. [mm]", self, "y_average"], {
"digits": 3,
"read_only": True
}],
[[TweakPanel, "Calibration X [mrad/mm]", self, "x_gain"], {
"digits": 4
}],
[[TweakPanel, "Calibration Y [V/mm]", self, "y_gain"], {
"digits": 4
}],
[[PropertyPanel, "Control X PV", self, "x_PV"], {}],
[[PropertyPanel, "Control Y PV", self, "y_PV"], {}],
[[PropertyPanel, "Control X read PV", self, "x_read_PV"], {}],
[[PropertyPanel, "Control Y read PV", self, "y_read_PV"], {}],
[[TweakPanel, "Control X [mrad]", self, "x_control"], {
"digits": 4
}],
[[TweakPanel, "Control Y [V]", self, "y_control"], {
"digits": 4
}],
[[TweakPanel, "Control X avg. [mrad]", self, "x_control_average"],
{
"digits": 4
}],
[[TweakPanel, "Control Y avg. [V]", self, "y_control_average"], {
"digits": 4
}],
[[
PropertyPanel, "Control X corr. [mrad]", self,
"x_control_corrected"
], {
"digits": 4,
"read_only": True
}],
[[
PropertyPanel, "Control Y corr. [V]", self,
"y_control_corrected"
], {
"digits": 4,
"read_only": True
}],
[[TogglePanel, "Stabilization X", self, "x_enabled"], {
"type": "Off/On"
}],
[[TogglePanel, "Stabilization Y", self, "y_enabled"], {
"type": "Off/On"
}],
[[ButtonPanel, "Correct X", self, "apply_x_correction"], {
"label": "Correct X"
}],
[[ButtonPanel, "Correct Y", self, "apply_y_correction"], {
"label": "Correct Y"
}],
[[ButtonPanel, "Correct Position", self, "apply_correction"], {
"label": "Correct"
}],
]
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title="X-Ray Beam Stabilization",
parameters=parameters,
standard_view=self.standard_view,
refresh=True,
live=True,
)
def __init__(self,parent=None,update=None):
if update is not None: self.update = update
if self.update is None:
from Ensemble_SAXS_pp import Ensemble_SAXS
self.update = [Ensemble_SAXS.update]
from timing_system import timing_system
self.object = timing_system
self.standard_view = ["#"]+[str(timing_system.channels[i].channel_number+1)
for i in range(0,len(timing_system.channels))]
import wx
self.layout = [[
"#",
[wx.StaticText,[],{"label":"PP","size":(35,-1)}],
[wx.StaticText,[],{"label":"I/O","size":(50,-1)}],
[wx.StaticText,[],{"label":"Description","size":(140,-1)}],
[wx.StaticText,[],{"label":"Mnemonic","size":(75,-1)}],
[wx.StaticText,[],{"label":"Special\nPP","size":(75,-1)}],
[wx.StaticText,[],{"label":"Special\nHW","size":(70,-1)}],
[wx.StaticText,[],{"label":"Offset\nHW","size":(100,-1)}],
[wx.StaticText,[],{"label":"Offset\nsign","size":(50,-1)}],
[wx.StaticText,[],{"label":"Duration\nHW","size":(75,-1)}],
[wx.StaticText,[],{"label":"Duration\nHW reg","size":(75,-1)}],
[wx.StaticText,[],{"label":"Offset\nPP ticks","size":(70,-1)}],
[wx.StaticText,[],{"label":"Duration\nPP ticks","size":(75,-1)}],
[wx.StaticText,[],{"label":"Cont.","size":(45,-1)}],
[wx.StaticText,[],{"label":"Slaved","size":(72,-1)}],
[wx.StaticText,[],{"label":"Gated","size":(72,-1)}],
[wx.StaticText,[],{"label":"Count\nEnabled","size":(50,-1)}],
[wx.StaticText,[],{"label":"State","size":(60,-1)}],
]]
from Panel import PropertyPanel,TogglePanel
from numpy import inf
self.layout += [[
str(timing_system.channels[i].channel_number+1),
[TogglePanel, [],{"name":"channels[%d].PP_enabled"%i,"type":"/PP","width":35,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].input.count"%i,"type":"Out/IN","width":50,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].description"%i,"width":140,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].mnemonic"%i,"width":75,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].special"%i,"width":75,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].specout.count"%i,"type":"/70MHz/diag1/diag2","width":70,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].offset_HW"%i,"type":"time.6","width":100,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].offset_sign"%i,"type":"float","width":50,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].pulse_length_HW"%i,"type":"time","width":75,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].pulse.value"%i,"type":"time","width":75,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].offset_PP"%i,"type":"float","width":70,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].pulse_length_PP"%i,"type":"float","width":70,"refresh_period":inf}],
[TogglePanel, [],{"name":"channels[%d].enable.count"%i,"type":"/Cont","width":45,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].timed"%i,"width":72,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].gated"%i,"width":72,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].counter_enabled"%i,"type":"/On","width":50,"refresh_period":inf}],
[PropertyPanel,[],{"name":"channels[%d].output_status"%i,"width":60,"refresh_period":inf}],
] for i in range(0,len(timing_system.channels))]
BasePanel.__init__(self,
parent=parent,
name=self.name,
title=self.title,
icon=self.icon,
object=self.object,
layout=self.layout,
standard_view=self.standard_view,
label_width=25,
refresh=True,
live=True,
update=update,
)
def __init__(self, parent=None, update=None, *args, **kwargs):
if update is not None: self.update = update
if self.update is None:
from Ensemble_SAXS_pp import Ensemble_SAXS
self.update = [Ensemble_SAXS.update]
##from timing_sequence import timing_sequencer
##update=[timing_sequencer.cache_clear,timing_sequencer.update]
from timing_system import timing_system
self.parameters = [
[[
timing_system.channels.xosct,
"X-ray Scope Trigger",
], {
"update": self.update
}],
[[
timing_system.channels.delay,
"Laser to X-ray Delay",
], {
"update": self.update
}],
[[
timing_system.channels.psod3,
"Ps Laser Osc. Delay",
], {
"update": self.update
}],
##[[timing_system.channels.psd1, "Ps Laser Osc. Delay GigaBaudics",],{"update": self.update}],
[[
timing_system.channels.pst,
"Ps Laser Trigger",
], {
"update": self.update
}],
[[
timing_system.channels.nsq,
"Ns Laser Q-Switch Trigger",
], {
"update": self.update
}],
[[
timing_system.channels.nsf,
"Ns Laser Flash Lamp Trigger",
], {
"update": self.update
}],
[[
timing_system.channels.losct,
"Laser Scope Trigger",
], {
"update": self.update
}],
[[
timing_system.channels.lcam,
"Laser Camera Trigger",
], {
"update": self.update
}],
[[
timing_system.hlcnd,
"Heatload Chopper Phase",
], {
"keep_value": True
}],
[[
timing_system.hlcad,
"Heatload Chop. Act. Phase",
], {
"keep_value": True
}],
[[
timing_system.channels.hsc.delay,
"High-Speed Chopper Phase",
], {
"update": self.update,
"keep_value": True
}],
[[
timing_system.p0_shift,
"P0 Shift",
], {}],
[[
timing_system.channels.ms,
"X-ray Shutter Delay",
], {
"update": self.update
}],
[[
timing_system.channels.ms,
"X-ray Shutter Pulse Length",
], {
"update": self.update,
"attribute": "pulse_length"
}],
[[
timing_system.channels.xdet,
"X-ray Detector Delay",
], {
"update": self.update
}],
[[
timing_system.channels.xdet,
"X-ray Detector Pulse Length",
], {
"update": self.update,
"attribute": "pulse_length"
}],
[[
timing_system.channels.trans,
"Sample Transl. Delay",
], {
"update": self.update
}],
[[
timing_system.channels.trans,
"Sample Transl. Pulse Length",
], {
"update": self.update,
"attribute": "pulse_length"
}],
]
BasePanel.__init__(self,
parent=parent,
name=self.name,
icon=self.icon,
title=self.title,
component=CalibrationControl,
parameters=self.parameters,
standard_view=self.standard_view,
label_width=250,
refresh=False,
live=False,
*args,
**kwargs)
def __init__(self,
parent=None,
configuration=None,
name=None,
globals=None,
locals=None):
if configuration is not None: self.configuration = configuration
elif name is not None:
from configuration import configuration
self.configuration = configuration(name,
globals=globals,
locals=locals)
else:
raise RuntimeError(
"SavedPositionsPanel requires 'configuration' or 'name'")
parameters = [
[[PropertyPanel, "Rows", self.configuration, "nrows"], {}],
[[PropertyPanel, "Title", self.configuration, "title"], {}],
[[PropertyPanel, "Mnemonic", self.configuration, "name"], {}],
[[
PropertyPanel, "Python code", self.configuration,
"motor_names[:]"
], {}],
[[
PropertyPanel, "Column mnemonics", self.configuration,
"names[:]"
], {}],
[[
PropertyPanel, "Column labels", self.configuration,
"motor_labels[:]"
], {}],
[[PropertyPanel, "Column widths", self.configuration, "widths[:]"],
{}],
[[
PropertyPanel, "Column formats", self.configuration,
"formats[:]"
], {}],
[[PropertyPanel, "Tolerances", self.configuration, "tolerance[:]"],
{}],
[[
PropertyPanel, "Name width", self.configuration,
"description_width"
], {}],
[[PropertyPanel, "Row height", self.configuration, "row_height"],
{}],
[[
PropertyPanel, "Apply buttons", self.configuration,
"show_apply_buttons"
], {}],
[[
PropertyPanel, "Apply button label", self.configuration,
"apply_button_label"
], {}],
[[
PropertyPanel, "Update buttons", self.configuration,
"show_define_buttons"
], {}],
[[
PropertyPanel, "Update button label", self.configuration,
"define_button_label"
], {}],
[[
PropertyPanel, "Stop button", self.configuration,
"show_stop_button"
], {}],
[[PropertyPanel, "Go To", self.configuration, "serial"], {
"type":
"All motors at once/One motor at a time (left to right)"
}],
[[PropertyPanel, "Vertical", self.configuration, "vertical"], {}],
[[
PropertyPanel, "Multiple Selections", self.configuration,
"multiple_selections"
], {}],
]
from numpy import inf
BasePanel.__init__(
self,
parent=parent,
name=self.name,
title=self.title,
parameters=parameters,
standard_view=self.standard_view,
subname=True,
label_width=130,
width=250,
refresh_period=1.0,
)