def assignTemplate(self, obj, template):
'''assignTemplate(obj, template) ... extract the properties from the given template file and assign to receiver.
This will also create any TCs stored in the template.'''
tcs = []
if template:
tree = xml.parse(template)
for job in tree.getroot().iter(JobTemplate.Job):
if job.get(JobTemplate.GeometryTolerance):
obj.GeometryTolerance = float(
job.get(JobTemplate.GeometryTolerance))
if job.get(JobTemplate.PostProcessor):
obj.PostProcessor = job.get(JobTemplate.PostProcessor)
if job.get(JobTemplate.PostProcessorArgs):
obj.PostProcessorArgs = job.get(
JobTemplate.PostProcessorArgs)
else:
obj.PostProcessorArgs = ''
if job.get(JobTemplate.PostProcessorOutputFile):
obj.PostProcessorOutputFile = job.get(
JobTemplate.PostProcessorOutputFile)
if job.get(JobTemplate.Description):
obj.Description = job.get(JobTemplate.Description)
for tc in tree.getroot().iter(JobTemplate.ToolController):
tcs.append(PathToolController.FromTemplate(tc))
for stock in tree.getroot().iter(JobTemplate.Stock):
obj.Stock = PathStock.CreateFromTemplate(self, stock)
else:
tcs.append(PathToolController.Create())
PathLog.debug("setting tool controllers (%d)" % len(tcs))
obj.ToolController = tcs
def setFromTemplateFile(self, obj, template):
"""setFromTemplateFile(obj, template) ... extract the properties from the given template file and assign to receiver.
This will also create any TCs stored in the template."""
tcs = []
if template:
with open(PathUtil.toUnicode(template), "rb") as fp:
attrs = json.load(fp)
if attrs.get(JobTemplate.Version) and 1 == int(attrs[JobTemplate.Version]):
attrs = self.setupSheet.decodeTemplateAttributes(attrs)
if attrs.get(JobTemplate.SetupSheet):
self.setupSheet.setFromTemplate(attrs[JobTemplate.SetupSheet])
if attrs.get(JobTemplate.GeometryTolerance):
obj.GeometryTolerance = float(
attrs.get(JobTemplate.GeometryTolerance)
)
if attrs.get(JobTemplate.PostProcessor):
obj.PostProcessor = attrs.get(JobTemplate.PostProcessor)
if attrs.get(JobTemplate.PostProcessorArgs):
obj.PostProcessorArgs = attrs.get(JobTemplate.PostProcessorArgs)
else:
obj.PostProcessorArgs = ""
if attrs.get(JobTemplate.PostProcessorOutputFile):
obj.PostProcessorOutputFile = attrs.get(
JobTemplate.PostProcessorOutputFile
)
if attrs.get(JobTemplate.Description):
obj.Description = attrs.get(JobTemplate.Description)
if attrs.get(JobTemplate.ToolController):
for tc in attrs.get(JobTemplate.ToolController):
tcs.append(PathToolController.FromTemplate(tc))
if attrs.get(JobTemplate.Stock):
obj.Stock = PathStock.CreateFromTemplate(
obj, attrs.get(JobTemplate.Stock)
)
if attrs.get(JobTemplate.Fixtures):
obj.Fixtures = [
x for y in attrs.get(JobTemplate.Fixtures) for x in y
]
if attrs.get(JobTemplate.OrderOutputBy):
obj.OrderOutputBy = attrs.get(JobTemplate.OrderOutputBy)
if attrs.get(JobTemplate.SplitOutput):
obj.SplitOutput = attrs.get(JobTemplate.SplitOutput)
PathLog.debug("setting tool controllers (%d)" % len(tcs))
obj.Tools.Group = tcs
else:
PathLog.error(
"Unsupported PathJob template version {}".format(
attrs.get(JobTemplate.Version)
)
)
if not tcs:
self.addToolController(PathToolController.Create())
def toolControllerEdit(self):
for item in self.form.toolControllerList.selectedItems():
tc = item.data(self.DataObject)
dlg = PathToolController.DlgToolControllerEdit(tc)
dlg.exec_()
self.setFields()
self.toolControllerSelect()
def test00(self):
'''Verify ToolController templateAttrs'''
t = self.createTool('T1')
tc = PathToolController.Create('TC0', t)
tc.Label = 'ToolController'
tc.ToolNumber = 7
tc.VertFeed = '3 in/s'
tc.VertFeed = round(tc.VertFeed, 1)
tc.HorizFeed = '10 mm/s'
tc.VertRapid = 40
tc.HorizRapid = 28
tc.SpindleDir = 'Reverse'
tc.SpindleSpeed = 12000
attrs = tc.Proxy.templateAttrs(tc)
self.assertEqual(attrs['name'], 'TC0')
self.assertEqual(attrs['label'], 'ToolController')
self.assertEqual(attrs['nr'], 7)
self.assertEqual(attrs['vfeed'], '76.2 mm/s')
self.assertEqual(attrs['hfeed'], '10.0 mm/s')
self.assertEqual(attrs['vrapid'], '40.0 mm/s')
self.assertEqual(attrs['hrapid'], '28.0 mm/s')
self.assertEqual(attrs['dir'], 'Reverse')
self.assertEqual(attrs['speed'], 12000)
if PathPreferences.toolsReallyUseLegacyTools():
self.assertEqual(attrs['tool'], t.templateAttrs())
else:
self.assertEqual(attrs['tool'], t.Proxy.templateAttrs(t))
return tc
def setFromTemplateFile(self, obj, template):
'''setFromTemplateFile(obj, template) ... extract the properties from the given template file and assign to receiver.
This will also create any TCs stored in the template.'''
tcs = []
if template:
with open(PathUtil.toUnicode(template), 'rb') as fp:
attrs = json.load(fp)
if attrs.get(JobTemplate.Version) and 1 == int(
attrs[JobTemplate.Version]):
attrs = self.setupSheet.decodeTemplateAttributes(attrs)
if attrs.get(JobTemplate.SetupSheet):
self.setupSheet.setFromTemplate(
attrs[JobTemplate.SetupSheet])
if attrs.get(JobTemplate.GeometryTolerance):
obj.GeometryTolerance = float(
attrs.get(JobTemplate.GeometryTolerance))
if attrs.get(JobTemplate.PostProcessor):
obj.PostProcessor = attrs.get(JobTemplate.PostProcessor)
if attrs.get(JobTemplate.PostProcessorArgs):
obj.PostProcessorArgs = attrs.get(
JobTemplate.PostProcessorArgs)
else:
obj.PostProcessorArgs = ''
if attrs.get(JobTemplate.PostProcessorOutputFile):
obj.PostProcessorOutputFile = attrs.get(
JobTemplate.PostProcessorOutputFile)
if attrs.get(JobTemplate.Description):
obj.Description = attrs.get(JobTemplate.Description)
if attrs.get(JobTemplate.ToolController):
for tc in attrs.get(JobTemplate.ToolController):
tcs.append(PathToolController.FromTemplate(tc))
if attrs.get(JobTemplate.Stock):
obj.Stock = PathStock.CreateFromTemplate(
obj, attrs.get(JobTemplate.Stock))
PathLog.debug("setting tool controllers (%d)" % len(tcs))
obj.ToolController = tcs
else:
PathLog.error(
translate('PathJob',
"Unsupported PathJob template version %s") %
attrs.get(JobTemplate.Version))
if not tcs:
self.addToolController(PathToolController.Create())
def test00(self):
"""Test that FeedRate Helper populates horiz and vert feed rate based on TC"""
t = Path.Tool("test", "5.0")
tc = PathToolController.Create("TC0", t)
tc.VertRapid = 5
tc.HorizRapid = 10
tc.VertFeed = 15
tc.HorizFeed = 20
resultlist = PathFeedRate.setFeedRate(self.commandlist, tc)
print(resultlist)
self.assertTrue(resultlist[0].Parameters["F"] == 5)
self.assertTrue(resultlist[1].Parameters["F"] == 10)
self.assertTrue(resultlist[2].Parameters["F"] == 15)
self.assertTrue(resultlist[3].Parameters["F"] == 20)
def test01(self):
'''Verify ToolController template roundtrip.'''
tc0 = self.test00()
tc1 = PathToolController.FromTemplate(tc0.Proxy.templateAttrs(tc0))
self.assertNotEqual(tc0.Name, tc1.Name)
self.assertNotEqual(tc0.Label, tc1.Label)
self.assertEqual(tc0.ToolNumber, tc1.ToolNumber)
self.assertRoughly(tc0.VertFeed, tc1.VertFeed)
self.assertRoughly(tc0.HorizFeed, tc1.HorizFeed)
self.assertRoughly(tc0.VertRapid, tc1.VertRapid)
self.assertRoughly(tc0.HorizRapid, tc1.HorizRapid)
self.assertEqual(tc0.SpindleDir, tc1.SpindleDir)
self.assertRoughly(tc0.SpindleSpeed, tc1.SpindleSpeed)
self.assertEqual(tc0.Tool.Name, tc1.Tool.Name)
self.assertRoughly(tc0.Tool.Diameter, tc1.Tool.Diameter)
def test01(self):
'''Verify ToolController template roundtrip.'''
tc0 = self.test00()
tc1 = PathToolController.FromTemplate(tc0.Proxy.templateAttrs(tc0))
self.assertNotEqual(tc0.Name, tc1.Name)
self.assertNotEqual(tc0.Label, tc1.Label)
self.assertEqual(tc0.ToolNumber, tc1.ToolNumber)
self.assertRoughly(tc0.VertFeed, tc1.VertFeed)
self.assertRoughly(tc0.HorizFeed, tc1.HorizFeed)
self.assertRoughly(tc0.VertRapid, tc1.VertRapid)
self.assertRoughly(tc0.HorizRapid, tc1.HorizRapid)
self.assertEqual(tc0.SpindleDir, tc1.SpindleDir)
self.assertRoughly(tc0.SpindleSpeed, tc1.SpindleSpeed)
# These are not valid because the name & label get adjusted if there
# is a conflict. No idea how this could work with the C implementation
#self.assertEqual(tc0.Tool.Name, tc1.Tool.Name)
#self.assertEqual(tc0.Tool.Label, tc1.Tool.Label)
self.assertRoughly(tc0.Tool.Diameter, tc1.Tool.Diameter)
def Create(name='Default Tool', tool=None, toolNumber=1):
PathLog.track(tool, toolNumber)
obj = PathToolController.Create(name, tool, toolNumber)
ViewProvider(obj.ViewObject)
return obj
