def render_emblems(item, emblems):
emblems = tuple(emblems)
if not emblems:
return
icon = self.rendered_emblem_cache.get(emblems, None)
if icon is None:
pixmaps = []
for emblem in emblems:
pm = self.emblem_cache.get(emblem, None)
if pm is None:
pm = self.emblem_cache[emblem] = QPixmap(
I(emblem)).scaled(self.iconSize(), transformMode=Qt.SmoothTransformation)
pixmaps.append(pm)
num = len(pixmaps)
w, h = pixmaps[0].width(), pixmaps[0].height()
if num == 1:
icon = self.rendered_emblem_cache[emblems] = QIcon(pixmaps[0])
else:
canvas = QPixmap((num * w) + ((num-1)*2), h)
canvas.fill(Qt.transparent)
painter = QPainter(canvas)
for i, pm in enumerate(pixmaps):
painter.drawPixmap(i * (w + 2), 0, pm)
painter.end()
icon = self.rendered_emblem_cache[emblems] = canvas
item.setData(0, Qt.DecorationRole, icon)
def _exportImageToPNG(self, filename=None):
if not filename:
if not self._export_png_dialog:
dialog = self._export_png_dialog = QFileDialog(self, "Export image to PNG", ".", "*.png")
dialog.setDefaultSuffix("png")
dialog.setFileMode(QFileDialog.AnyFile)
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setModal(True)
QObject.connect(dialog, SIGNAL("filesSelected(const QStringList &)"), self._exportImageToPNG)
return self._export_png_dialog.exec_() == QDialog.Accepted
busy = BusyIndicator()
if isinstance(filename, QStringList):
filename = filename[0]
filename = str(filename)
# make QPixmap
nx, ny = self.image.imageDims()
(l0, l1), (m0, m1) = self.image.getExtents()
pixmap = QPixmap(nx, ny)
painter = QPainter(pixmap)
# use QwtPlot implementation of draw canvas, since we want to avoid caching
xmap = QwtScaleMap()
xmap.setPaintInterval(0, nx)
xmap.setScaleInterval(l1, l0)
ymap = QwtScaleMap()
ymap.setPaintInterval(ny, 0)
ymap.setScaleInterval(m0, m1)
self.image.draw(painter, xmap, ymap, pixmap.rect())
painter.end()
# save to file
try:
pixmap.save(filename, "PNG")
except Exception as exc:
self.emit(SIGNAL("showErrorMessage"), "Error writing %s: %s" % (filename, str(exc)))
return
self.emit(SIGNAL("showMessage"), "Exported image to file %s" % filename)
def paintEvent(self, event):
contents_y = self.edit.verticalScrollBar().value()
page_bottom = contents_y + self.edit.viewport().height()
font_metrics = self.fontMetrics()
painter = QPainter(self)
line_count = 0
block = self.edit.document().begin()
while block.isValid():
line_count += 1
# The top left position of the block in the document
position = self.edit.document().documentLayout().blockBoundingRect(block).topLeft()
# Check if the position of the block is out side of the visible
# area.
if position.y() > page_bottom:
break
# Draw the line number right justified at the y position of the
# line. 3 is a magic padding number. drawText(x, y, text).
painter.drawText(-5 + self.width() - font_metrics.width(str(line_count)) - 3,
round(position.y()) - contents_y + font_metrics.ascent(),
str(line_count))
block = block.next()
self.highest_line = line_count
painter.end()
QWidget.paintEvent(self, event)
def __call__(self, ok):
from PyQt4.Qt import QImage, QPainter, QByteArray, QBuffer
try:
if not ok:
raise RuntimeError('Rendering of HTML failed.')
de = self.page.mainFrame().documentElement()
pe = de.findFirst('parsererror')
if not pe.isNull():
raise ParserError(pe.toPlainText())
image = QImage(self.page.viewportSize(), QImage.Format_ARGB32)
image.setDotsPerMeterX(96*(100/2.54))
image.setDotsPerMeterY(96*(100/2.54))
painter = QPainter(image)
self.page.mainFrame().render(painter)
painter.end()
ba = QByteArray()
buf = QBuffer(ba)
buf.open(QBuffer.WriteOnly)
image.save(buf, 'JPEG')
self.data = str(ba.data())
except Exception as e:
self.exception = e
self.traceback = traceback.format_exc()
finally:
self.loop.exit(0)
def do_paged_render(self, outpath):
from PyQt4.Qt import QSize, QPainter
if self.paged_js is None:
from calibre.utils.resources import compiled_coffeescript
self.paged_js = compiled_coffeescript('ebooks.oeb.display.utils')
self.paged_js += compiled_coffeescript('ebooks.oeb.display.paged')
printer = get_pdf_printer(self.opts, output_file_name=outpath)
painter = QPainter(printer)
zoomx = printer.logicalDpiX()/self.view.logicalDpiX()
zoomy = printer.logicalDpiY()/self.view.logicalDpiY()
painter.scale(zoomx, zoomy)
pr = printer.pageRect()
evaljs = self.view.page().mainFrame().evaluateJavaScript
evaljs(self.paged_js)
self.view.page().setViewportSize(QSize(pr.width()/zoomx,
pr.height()/zoomy))
evaljs('''
document.body.style.backgroundColor = "white";
paged_display.set_geometry(1, 0, 0, 0);
paged_display.layout();
paged_display.fit_images();
''')
mf = self.view.page().mainFrame()
while True:
mf.render(painter)
nsl = evaljs('paged_display.next_screen_location()').toInt()
if not nsl[1] or nsl[0] <= 0: break
evaljs('window.scrollTo(%d, 0)'%nsl[0])
printer.newPage()
painter.end()
printer.abort()
def render_html(self, ok):
try:
if not ok:
return
cwidth, cheight = self.page.mainFrame().contentsSize().width(), self.page.mainFrame().contentsSize().height()
self.page.setViewportSize(QSize(cwidth, cheight))
factor = float(self.width)/cwidth if cwidth > self.width else 1
cutoff_height = int(self.height/factor)-3
image = QImage(self.page.viewportSize(), QImage.Format_ARGB32)
image.setDotsPerMeterX(self.dpi*(100/2.54))
image.setDotsPerMeterY(self.dpi*(100/2.54))
painter = QPainter(image)
self.page.mainFrame().render(painter)
painter.end()
cheight = image.height()
cwidth = image.width()
pos = 0
while pos < cheight:
img = image.copy(0, pos, cwidth, min(cheight-pos, cutoff_height))
pos += cutoff_height-20
if cwidth > self.width:
img = img.scaledToWidth(self.width, Qt.SmoothTransform)
f = os.path.join(self.tdir, '%d.png'%pos)
img.save(f)
self.images.append((f, img.width(), img.height()))
finally:
QApplication.quit()
def event(self, e):
if e.type() == e.Paint:
p = QPainter(self)
# Without this the viewport margin is rendered in QPalette::Window
# instead of QPalette::Base
p.fillRect(0, 0, self.padding_left+2, self.height(), self.palette().color(QPalette.Base))
p.end()
return QListView.event(self, e)
def current_page_image(self, overlap=-1):
if overlap < 0:
overlap = self.height()
img = QImage(self.width(), overlap, QImage.Format_ARGB32_Premultiplied)
painter = QPainter(img)
painter.setRenderHints(self.renderHints())
self.document.mainFrame().render(painter, QRegion(0, 0, self.width(), overlap))
painter.end()
return img
def add_image(self, img, cache_key):
ref = self.get_image(cache_key)
if ref is not None:
return ref
fmt = img.format()
image = QImage(img)
if (image.depth() == 1 and img.colorTable().size() == 2 and
img.colorTable().at(0) == QColor(Qt.black).rgba() and
img.colorTable().at(1) == QColor(Qt.white).rgba()):
if fmt == QImage.Format_MonoLSB:
image = image.convertToFormat(QImage.Format_Mono)
fmt = QImage.Format_Mono
else:
if (fmt != QImage.Format_RGB32 and fmt != QImage.Format_ARGB32):
image = image.convertToFormat(QImage.Format_ARGB32)
fmt = QImage.Format_ARGB32
w = image.width()
h = image.height()
d = image.depth()
if fmt == QImage.Format_Mono:
bytes_per_line = (w + 7) >> 3
data = image.constBits().asstring(bytes_per_line * h)
return self.write_image(data, w, h, d, cache_key=cache_key)
has_alpha = False
soft_mask = None
if fmt == QImage.Format_ARGB32:
tmask = image.constBits().asstring(4*w*h)[self.alpha_bit::4]
sdata = bytearray(tmask)
vals = set(sdata)
vals.discard(255) # discard opaque pixels
has_alpha = bool(vals)
if has_alpha:
# Blend image onto a white background as otherwise Qt will render
# transparent pixels as black
background = QImage(image.size(), QImage.Format_ARGB32_Premultiplied)
background.fill(Qt.white)
painter = QPainter(background)
painter.drawImage(0, 0, image)
painter.end()
image = background
ba = QByteArray()
buf = QBuffer(ba)
image.save(buf, 'jpeg', 94)
data = bytes(ba.data())
if has_alpha:
soft_mask = self.write_image(tmask, w, h, 8)
return self.write_image(data, w, h, 32, dct=True,
soft_mask=soft_mask, cache_key=cache_key)
def setup_printer(self, outpath):
self.printer = self.painter = None
printer = get_pdf_printer(self.opts, output_file_name=outpath)
painter = QPainter(printer)
zoomx = printer.logicalDpiX() / self.view.logicalDpiX()
zoomy = printer.logicalDpiY() / self.view.logicalDpiY()
painter.scale(zoomx, zoomy)
pr = printer.pageRect()
self.printer, self.painter = printer, painter
self.viewport_size = QSize(pr.width() / zoomx, pr.height() / zoomy)
self.page.setViewportSize(self.viewport_size)
def run(dev, func):
p = QPainter(dev)
if isinstance(dev, PdfDevice):
dev.init_page()
xmax, ymax = p.viewport().width(), p.viewport().height()
try:
func(p, xmax, ymax)
finally:
p.end()
if isinstance(dev, PdfDevice):
if dev.engine.errors_occurred:
raise SystemExit(1)
def insert_cover(self):
if self.cover_data is None:
return
item_path = os.path.join(self.tmp_path, 'cover.pdf')
printer = get_pdf_printer(self.opts, output_file_name=item_path)
self.combine_queue.insert(0, item_path)
p = QPixmap()
p.loadFromData(self.cover_data)
if not p.isNull():
painter = QPainter(printer)
draw_image_page(printer, painter, p,
preserve_aspect_ratio=self.opts.preserve_cover_aspect_ratio)
painter.end()
printer.abort()
def insert_cover(self):
if not isinstance(self.cover_data, bytes):
return
item_path = os.path.join(self.tmp_path, "cover.pdf")
printer = get_pdf_printer(self.opts, output_file_name=item_path, for_comic=True)
self.combine_queue.insert(0, item_path)
p = QPixmap()
p.loadFromData(self.cover_data)
if not p.isNull():
painter = QPainter(printer)
draw_image_page(printer, painter, p, preserve_aspect_ratio=self.opts.preserve_cover_aspect_ratio)
painter.end()
self.append_doc(item_path)
printer.abort()
def paintEvent(self, ev):
p = QPainter(self)
p.setClipRect(ev.rect())
bg = self.palette().color(QPalette.AlternateBase)
if self.hovering:
bg = bg.lighter(115)
p.fillRect(self.rect(), bg)
try:
p.drawText(self.rect(), Qt.AlignLeft|Qt.AlignVCenter|Qt.TextSingleLine, self.rendered_text)
finally:
p.end()
def paintEvent(self, event):
QWidget.paintEvent(self, event)
p = QPainter(self)
p.setRenderHints(QPainter.Antialiasing | QPainter.SmoothPixmapTransform)
try:
self.draw_background(p)
if self.original_image_data is None:
return
if not self.is_valid:
return self.draw_image_error(p)
self.load_pixmap()
self.draw_pixmap(p)
if self.selection_state.rect is not None:
self.draw_selection_rect(p)
finally:
p.end()
def paintEvent(self, event):
painter = QPainter(self)
painter.setRenderHints(self.renderHints())
self.document.mainFrame().render(painter, event.region())
if not self.isEnabled():
painter.fillRect(event.region().boundingRect(), self.DISABLED_BRUSH)
painter.end()
def paintEvent(self, event):
res = QToolButton.paintEvent(self, event)
if _enable_hacked_QToolButton_paintEvent and self.isChecked():
r = event.rect()
x,y = r.left(), r.top()
w,h = r.width(), r.height()
# There are at least three rect sizes: 30x35, 30x36, 32x33 (see debug-print below).
# Not sure if this sometimes includes some padding around the icon.
## print r.top(),r.bottom(),r.height(), r.left(),r.right(),r.width()
## 0 29 30 0 34 35
## 0 29 30 0 35 36
## 0 31 32 0 32 33
p = QPainter(self, True) # True claims to mean un-clipped -- not sure if this is good.
## Qt4 error: TypeError: too many arguments to QPainter(), 1 at most expected
color = toolbutton_highlight_color
p.setPen(QPen(color, 3)) # try 3 and 2
p.drawRect(x+2,y+2,w-4,h-4) #e could also try drawRoundRect(r, xroundedness, yroundedness)
return res
def render_images(self, outpath, mi, items):
printer = get_pdf_printer(self.opts, for_comic=True, output_file_name=outpath)
printer.setDocName(mi.title)
painter = QPainter(printer)
painter.setRenderHints(QPainter.Antialiasing | QPainter.SmoothPixmapTransform)
for i, imgpath in enumerate(items):
self.log("Rendering image:", i)
p = QPixmap()
p.load(imgpath)
if not p.isNull():
if i > 0:
printer.newPage()
draw_image_page(printer, painter, p)
else:
self.log.warn("Failed to load image", i)
painter.end()
def do_print(self, printer):
painter = QPainter(printer)
zoomx = printer.logicalDpiX()/self.view.logicalDpiX()
zoomy = printer.logicalDpiY()/self.view.logicalDpiY()
painter.scale(zoomx, zoomy)
pr = printer.pageRect()
self.view.page().setViewportSize(QSize(pr.width()/zoomx,
pr.height()/zoomy))
evaljs = self.mf.evaluateJavaScript
loop = QEventLoop(self)
pagenum = 0
from_, to = printer.fromPage(), printer.toPage()
first = True
for path in self.iterator.spine:
self.loaded_ok = None
load_html(path, self.view, codec=getattr(path, 'encoding', 'utf-8'),
mime_type=getattr(path, 'mime_type', None))
while self.loaded_ok is None:
loop.processEvents(loop.ExcludeUserInputEvents)
if not self.loaded_ok:
return error_dialog(self.parent(), _('Failed to render'),
_('Failed to render document %s')%path, show=True)
evaljs(self.paged_js)
evaljs('''
document.body.style.backgroundColor = "white";
paged_display.set_geometry(1, 0, 0, 0);
paged_display.layout();
paged_display.fit_images();
''')
while True:
pagenum += 1
if (pagenum >= from_ and (to == 0 or pagenum <= to)):
if not first:
printer.newPage()
first = False
self.mf.render(painter)
nsl = evaljs('paged_display.next_screen_location()').toInt()
if not nsl[1] or nsl[0] <= 0: break
evaljs('window.scrollTo(%d, 0)'%nsl[0])
painter.end()
def __call__(self, canvas):
if canvas.has_selection and canvas.selection_state.rect is not None:
pimg = self.after_image
img = self.after_image = QImage(canvas.current_image)
rect = QRectF(*get_selection_rect(img, canvas.selection_state.rect, canvas.target))
p = QPainter(img)
p.setRenderHint(p.SmoothPixmapTransform, True)
p.drawImage(rect, pimg, QRectF(pimg.rect()))
p.end()
return self.after_image
def render_images(self, outpath, mi, items):
printer = get_pdf_printer(self.opts, for_comic=True,
output_file_name=outpath)
printer.setDocName(mi.title)
printer.setCreator(u'%s [%s]'%(__appname__, __version__))
# Seems to be no way to set author
painter = QPainter(printer)
painter.setRenderHints(QPainter.Antialiasing|QPainter.SmoothPixmapTransform)
for i, imgpath in enumerate(items):
self.log('Rendering image:', i)
p = QPixmap()
p.load(imgpath)
if not p.isNull():
if i > 0:
printer.newPage()
draw_image_page(printer, painter, p)
else:
self.log.warn('Failed to load image', i)
painter.end()
def makeQPixmap(self, width, height):
data = numpy.zeros((width, height), float)
data[...] = (numpy.arange(width) / (width - 1.))[:, numpy.newaxis]
# make brush image -- diag background, with colormap on top
img = QPixmap(width, height)
painter = QPainter(img)
painter.fillRect(0, 0, width, height, QBrush(QColor("white")))
painter.fillRect(0, 0, width, height, QBrush(Qt.BDiagPattern))
painter.drawImage(0, 0, self.colorize(data))
painter.end()
return img
def dump(self, items, out_stream, pdf_metadata):
opts = self.opts
self.outline = Outline(self.toc, items)
page_size = get_page_size(self.opts)
xdpi, ydpi = self.view.logicalDpiX(), self.view.logicalDpiY()
ml, mr = opts.margin_left, opts.margin_right
margin_side = min(ml, mr)
ml, mr = ml - margin_side, mr - margin_side
self.doc = PdfDevice(out_stream, page_size=page_size, left_margin=ml,
top_margin=0, right_margin=mr, bottom_margin=0,
xdpi=xdpi, ydpi=ydpi, errors=self.log.error,
debug=self.log.debug, compress=not
opts.uncompressed_pdf)
self.page.setViewportSize(QSize(self.doc.width(), self.doc.height()))
self.render_queue = items
self.total_items = len(items)
# TODO: Test margins
mt, mb = map(self.doc.to_px, (opts.margin_top, opts.margin_bottom))
ms = self.doc.to_px(margin_side, vertical=False)
self.margin_top, self.margin_size, self.margin_bottom = map(
lambda x:int(floor(x)), (mt, ms, mb))
self.painter = QPainter(self.doc)
self.doc.set_metadata(title=pdf_metadata.title,
author=pdf_metadata.author,
tags=pdf_metadata.tags)
self.painter.save()
try:
if self.cover_data is not None:
p = QPixmap()
p.loadFromData(self.cover_data)
if not p.isNull():
draw_image_page(QRect(0, 0, self.doc.width(), self.doc.height()),
self.painter, p,
preserve_aspect_ratio=self.opts.preserve_cover_aspect_ratio)
self.doc.end_page()
finally:
self.painter.restore()
QTimer.singleShot(0, self.render_book)
self.loop.exec_()
# TODO: Outline and links
self.painter.end()
if self.doc.errors_occurred:
raise Exception('PDF Output failed, see log for details')
def magnify_icons(a, b):
a = a.pixmap(16,16)
b = b.pixmap(16,16)
img = [QPixmap(16,16), QPixmap(16,16)]
for i in img:
i.fill(QColor(0, 0, 0, 0))
g = a.toImage()
for n in range(256):
x, y = n%16, n//16
c = QColor(g.pixel(x, y))
s = (c.redF() + c.greenF() + c.blueF()) / 3.0
l = s * 4.2
if l > 1.0: l = 1.0
c.setRgbF(s, s, s, l)
g.setPixel(x, y, c.rgba())
p = QPainter()
p.begin(i)
p.drawImage( QRectF(6, 0, 8, 16), g, QRectF(0, 0, 10, 16))
p.drawPixmap(QRectF(0, 0, 10, 16), b, QRectF(6, 1, 10, 15))
p.end()
a, b = b, a
return tuple(map(QIcon, img))
def paintEvent(self, event):
canvas_size = self.rect()
width = self.current_pixmap_size.width()
extrax = canvas_size.width() - width
if extrax < 0: extrax = 0
x = int(extrax/2.)
height = self.current_pixmap_size.height()
extray = canvas_size.height() - height
if extray < 0: extray = 0
y = int(extray/2.)
target = QRect(x, y, width, height)
p = QPainter(self)
p.setRenderHints(QPainter.Antialiasing | QPainter.SmoothPixmapTransform)
p.drawPixmap(target, self.pixmap.scaled(target.size(),
Qt.KeepAspectRatio, Qt.SmoothTransformation))
p.end()
def do_print(self, printer):
painter = QPainter(printer)
zoomx = printer.logicalDpiX() / self.view.logicalDpiX()
zoomy = printer.logicalDpiY() / self.view.logicalDpiY()
painter.scale(zoomx, zoomy)
pr = printer.pageRect()
self.view.page().setViewportSize(
QSize(pr.width() / zoomx,
pr.height() / zoomy))
evaljs = self.mf.evaluateJavaScript
loop = QEventLoop(self)
first = True
for path in self.iterator.spine:
self.loaded_ok = None
load_html(path,
self.view,
codec=getattr(path, 'encoding', 'utf-8'),
mime_type=getattr(path, 'mime_type', None))
while self.loaded_ok is None:
loop.processEvents(loop.ExcludeUserInputEvents)
if not self.loaded_ok:
return error_dialog(self.parent(),
_('Failed to render'),
_('Failed to render document %s') % path,
show=True)
evaljs(self.paged_js)
evaljs('''
document.body.style.backgroundColor = "white";
paged_display.set_geometry(1, 0, 0, 0);
paged_display.layout();
paged_display.fit_images();
''')
while True:
if not first:
printer.newPage()
first = False
self.mf.render(painter)
nsl = evaljs('paged_display.next_screen_location()').toInt()
if not nsl[1] or nsl[0] <= 0: break
evaljs('window.scrollTo(%d, 0)' % nsl[0])
painter.end()
def render_images(self, outpath, mi, items):
printer = get_pdf_printer(self.opts,
for_comic=True,
output_file_name=outpath)
printer.setDocName(mi.title)
painter = QPainter(printer)
painter.setRenderHints(QPainter.Antialiasing
| QPainter.SmoothPixmapTransform)
for i, imgpath in enumerate(items):
self.log('Rendering image:', i)
p = QPixmap()
p.load(imgpath)
if not p.isNull():
if i > 0:
printer.newPage()
draw_image_page(printer, painter, p)
else:
self.log.warn('Failed to load image', i)
painter.end()
def paintEvent(self, event):
res = QToolButton.paintEvent(self, event)
if _enable_hacked_QToolButton_paintEvent and self.isChecked():
r = event.rect()
x, y = r.left(), r.top()
w, h = r.width(), r.height()
# There are at least three rect sizes: 30x35, 30x36, 32x33 (see debug-print below).
# Not sure if this sometimes includes some padding around the icon.
## print r.top(),r.bottom(),r.height(), r.left(),r.right(),r.width()
## 0 29 30 0 34 35
## 0 29 30 0 35 36
## 0 31 32 0 32 33
p = QPainter(
self, True
) # True claims to mean un-clipped -- not sure if this is good.
## Qt4 error: TypeError: too many arguments to QPainter(), 1 at most expected
color = toolbutton_highlight_color
p.setPen(QPen(color, 3)) # try 3 and 2
p.drawRect(
x + 2, y + 2, w - 4, h - 4
) #e could also try drawRoundRect(r, xroundedness, yroundedness)
return res
def paintEvent(self, event):
contents_y = self.edit.verticalScrollBar().value()
page_bottom = contents_y + self.edit.viewport().height()
font_metrics = self.fontMetrics()
painter = QPainter(self)
line_count = 0
block = self.edit.document().begin()
while block.isValid():
line_count += 1
# The top left position of the block in the document
position = self.edit.document().documentLayout(
).blockBoundingRect(block).topLeft()
# Check if the position of the block is out side of the visible
# area.
if position.y() > page_bottom:
break
# Draw the line number right justified at the y position of the
# line. 3 is a magic padding number. drawText(x, y, text).
painter.drawText(
-5 + self.width() - font_metrics.width(str(line_count)) -
3,
round(position.y()) - contents_y + font_metrics.ascent(),
str(line_count))
block = block.next()
self.highest_line = line_count
painter.end()
QWidget.paintEvent(self, event)
def paintEvent(self, ev):
painter = QPainter(self)
painter.fillRect(ev.rect(), self.brush)
painter.end()
def paintEvent(self, event):
pmap = self.blank if self.pixmap is None or self.pixmap.isNull(
) else self.pixmap
target = self.rect()
scaled, width, height = fit_image(pmap.width(), pmap.height(),
target.width(), target.height())
target.setRect(target.x(), target.y(), width, height)
p = QPainter(self)
p.setRenderHints(QPainter.Antialiasing
| QPainter.SmoothPixmapTransform)
p.drawPixmap(target, pmap)
if self.pixmap is not None and not self.pixmap.isNull():
sztgt = target.adjusted(0, 0, 0, -4)
f = p.font()
f.setBold(True)
p.setFont(f)
sz = u'\u00a0%d x %d\u00a0' % (self.pixmap.width(),
self.pixmap.height())
flags = Qt.AlignBottom | Qt.AlignRight | Qt.TextSingleLine
szrect = p.boundingRect(sztgt, flags, sz)
p.fillRect(szrect.adjusted(0, 0, 0, 4), QColor(0, 0, 0, 200))
p.setPen(QPen(QColor(255, 255, 255)))
p.drawText(sztgt, flags, sz)
p.end()
def create_icon(text, palette=None, sz=32, divider=2):
if palette is None:
palette = QApplication.palette()
img = QImage(sz, sz, QImage.Format_ARGB32)
img.fill(Qt.transparent)
p = QPainter(img)
p.setRenderHints(p.TextAntialiasing | p.Antialiasing)
qDrawShadeRect(p, img.rect(), palette, fill=QColor('#ffffff'), lineWidth=1, midLineWidth=1)
f = p.font()
f.setFamily('Liberation Sans'), f.setPixelSize(sz // divider), f.setBold(True)
p.setFont(f), p.setPen(Qt.black)
p.drawText(img.rect().adjusted(2, 2, -2, -2), Qt.AlignCenter, text)
p.end()
return QIcon(QPixmap.fromImage(img))
def drag_icon(self, cover, multiple):
cover = cover.scaledToHeight(120, Qt.SmoothTransformation)
if multiple:
base_width = cover.width()
base_height = cover.height()
base = QImage(base_width + 21, base_height + 21,
QImage.Format_ARGB32_Premultiplied)
base.fill(QColor(255, 255, 255, 0).rgba())
p = QPainter(base)
rect = QRect(20, 0, base_width, base_height)
p.fillRect(rect, QColor('white'))
p.drawRect(rect)
rect.moveLeft(10)
rect.moveTop(10)
p.fillRect(rect, QColor('white'))
p.drawRect(rect)
rect.moveLeft(0)
rect.moveTop(20)
p.fillRect(rect, QColor('white'))
p.save()
p.setCompositionMode(p.CompositionMode_SourceAtop)
p.drawImage(rect.topLeft(), cover)
p.restore()
p.drawRect(rect)
p.end()
cover = base
return QPixmap.fromImage(cover)
def failed_img(self):
if self._failed_img is None:
i = QImage(200, 150, QImage.Format_ARGB32)
i.fill(Qt.white)
p = QPainter(i)
r = i.rect().adjusted(10, 10, -10, -10)
n = QPen(Qt.DashLine)
n.setColor(Qt.black)
p.setPen(n)
p.drawRect(r)
p.setPen(Qt.black)
f = self.font()
f.setPixelSize(20)
p.setFont(f)
p.drawText(r.adjusted(10, 0, -10, 0),
Qt.AlignCenter | Qt.TextWordWrap,
_('Image could not be rendered'))
p.end()
self._failed_img = QPixmap.fromImage(i)
return self._failed_img
def paintEvent(self, event):
canvas_size = self.rect()
width = self.current_pixmap_size.width()
extrax = canvas_size.width() - width
if extrax < 0:
extrax = 0
x = int(extrax/2.)
height = self.current_pixmap_size.height()
extray = canvas_size.height() - height
if extray < 0:
extray = 0
y = int(extray/2.)
target = QRect(x, y, width, height)
p = QPainter(self)
p.setRenderHints(QPainter.Antialiasing | QPainter.SmoothPixmapTransform)
p.drawPixmap(target, self.pixmap.scaled(target.size(),
Qt.KeepAspectRatio, Qt.SmoothTransformation))
if gprefs['bd_overlay_cover_size']:
sztgt = target.adjusted(0, 0, 0, -4)
f = p.font()
f.setBold(True)
p.setFont(f)
sz = u'\u00a0%d x %d\u00a0'%(self.pixmap.width(), self.pixmap.height())
flags = Qt.AlignBottom|Qt.AlignRight|Qt.TextSingleLine
szrect = p.boundingRect(sztgt, flags, sz)
p.fillRect(szrect.adjusted(0, 0, 0, 4), QColor(0, 0, 0, 200))
p.setPen(QPen(QColor(255,255,255)))
p.drawText(sztgt, flags, sz)
p.end()
def paint_line_numbers(self, ev):
painter = QPainter(self.line_number_area)
painter.fillRect(ev.rect(), self.line_number_palette.color(QPalette.Base))
block = self.firstVisibleBlock()
num = block.blockNumber()
top = int(self.blockBoundingGeometry(block).translated(self.contentOffset()).top())
bottom = top + int(self.blockBoundingRect(block).height())
current = self.textCursor().block().blockNumber()
painter.setPen(self.line_number_palette.color(QPalette.Text))
while block.isValid() and top <= ev.rect().bottom():
if block.isVisible() and bottom >= ev.rect().top():
if current == num:
painter.save()
painter.setPen(self.line_number_palette.color(QPalette.BrightText))
f = QFont(self.font())
f.setBold(True)
painter.setFont(f)
self.last_current_lnum = (top, bottom - top)
painter.drawText(0, top, self.line_number_area.width() - 5, self.fontMetrics().height(),
Qt.AlignRight, str(num + 1))
if current == num:
painter.restore()
block = block.next()
top = bottom
bottom = top + int(self.blockBoundingRect(block).height())
num += 1
def createCompositeCursor(cursor,
overlayCursor,
hotX=None,
hotY=None,
offsetX=0,
offsetY=0):
"""
Returns a composite 32x32 cursor using two other cursors.
This is useful for creating composite cursor images from two (or more)
cursors.
For example, the pencil cursor includes a horizontal and vertical
symbol when drawing a horizontal or vertical line. This function can
be used to create these cursors without having to create each one by hand.
The payoff is when the developer/artist wants to change the base cursor
image (i.e. the pencil cursor) without having to redraw and save all the
other versions of the cursor in the set.
@param cursor: The main cursor.
@type cursor: QCursor
@param overlayCursor: The cursor to overlay on top of I{cursor}.
@type overlayCursor: QCursor
@param hotX: The X coordinate of the hotspot. If none is given, the
hotspot of I{cursor} is used.
@type hotX: int
@param hotY: The Y coordinate of the hotspot. If none is given, the
hotspot of I{cursor} is used.
@type hotY: int
@param offsetX: The X offset in which to draw the overlay cursor onto
I{cursor}. The default is 0.
@type offsetX: int
@param offsetY: The Y offset in which to draw the overlay cursor onto
I{cursor}. The default is 0.
@type offsetY: int
@return: The composite cursor.
@rtype: QCursor
@note: It would be easy and useful to allow overlayCursor to be a QPixmap.
I'll add this when it becomes helpful. --Mark 2008-03-06.
"""
# Method:
# 1. Get cursor's pixmap and create a painter from it.
# 2. Get the pixmap from the overlay cursor and draw it onto the
# cursor pixmap to create the composite pixmap.
# 3. Create and return a new QCursor from the composite pixmap.
# Mark 2008-03-05
assert isinstance(cursor, QCursor)
assert isinstance(overlayCursor, QCursor)
if hotX is None:
hotX = cursor.hotSpot().x()
if hotY is None:
hotY = cursor.hotSpot().y()
pixmap = cursor.pixmap()
overlayPixmap = overlayCursor.pixmap()
painter = QPainter(pixmap)
painter.drawPixmap(offsetX, offsetY, overlayPixmap)
painter.end()
return QCursor(pixmap, hotX, hotY)
def paintEvent(self, ev):
p = QPainter(self)
p.setRenderHints(p.Antialiasing)
p.setBrush(self.brush)
p.setPen(Qt.NoPen)
p.drawPath(self.arrow_path)
p.end()
def _fetch_marvin_cover(with_border=False):
'''
Retrieve LargeCoverJpg from cache
'''
self._log_location()
con = sqlite3.connect(self.marvin_db_path)
with con:
con.row_factory = sqlite3.Row
# Fetch Hash from mainDb
cover_cur = con.cursor()
cover_cur.execute('''SELECT
Hash
FROM Books
WHERE ID = '{0}'
'''.format(self.book_id))
row = cover_cur.fetchone()
book_hash = row[b'Hash']
large_covers_subpath = self.connected_device._cover_subpath(
size="large")
cover_path = '/'.join([large_covers_subpath, '%s.jpg' % book_hash])
stats = self.parent.ios.exists(cover_path)
if stats:
self._log("fetching large cover from cache")
#self._log("cover size: {:,} bytes".format(int(stats['st_size'])))
cover_bytes = self.parent.ios.read(cover_path, mode='rb')
m_image = QImage()
m_image.loadFromData(cover_bytes)
if with_border:
m_image = m_image.scaledToHeight(
self.COVER_ICON_SIZE - self.BORDER_WIDTH * 2,
Qt.SmoothTransformation)
# Construct a QPixmap with yellow background
self.m_pixmap = QPixmap(
QSize(m_image.width() + self.BORDER_WIDTH * 2,
m_image.height() + self.BORDER_WIDTH * 2))
m_painter = QPainter(self.m_pixmap)
m_painter.setRenderHints(m_painter.Antialiasing)
m_painter.fillRect(self.m_pixmap.rect(),
QColor(0xFD, 0xFF, 0x99))
m_painter.drawImage(self.BORDER_WIDTH, self.BORDER_WIDTH,
m_image)
else:
m_image = m_image.scaledToHeight(self.COVER_ICON_SIZE,
Qt.SmoothTransformation)
self.m_pixmap = QPixmap(
QSize(m_image.width(), m_image.height()))
m_painter = QPainter(self.m_pixmap)
m_painter.setRenderHints(m_painter.Antialiasing)
m_painter.drawImage(0, 0, m_image)
self.marvin_cover.setPixmap(self.m_pixmap)
else:
# No cover available, use generic
self._log("No cached cover, using generic")
pixmap = QPixmap()
pixmap.load(I('book.png'))
pixmap = pixmap.scaled(self.COVER_ICON_SIZE,
self.COVER_ICON_SIZE,
aspectRatioMode=Qt.KeepAspectRatio,
transformMode=Qt.SmoothTransformation)
self.marvin_cover.setPixmap(pixmap)
def paintEvent(self, event):
QWidget.paintEvent(self, event)
pmap = self._pixmap
if pmap.isNull():
return
w, h = pmap.width(), pmap.height()
cw, ch = self.rect().width(), self.rect().height()
scaled, nw, nh = fit_image(w, h, cw, ch)
if scaled:
pmap = pmap.scaled(nw, nh, Qt.IgnoreAspectRatio,
Qt.SmoothTransformation)
w, h = pmap.width(), pmap.height()
x = int(abs(cw - w) / 2.)
y = int(abs(ch - h) / 2.)
target = QRect(x, y, w, h)
p = QPainter(self)
p.setRenderHints(QPainter.Antialiasing
| QPainter.SmoothPixmapTransform)
p.drawPixmap(target, pmap)
pen = QPen()
pen.setWidth(self.BORDER_WIDTH)
p.setPen(pen)
if self.draw_border:
p.drawRect(target)
#p.drawRect(self.rect())
p.end()
def dump(self, items, out_stream, pdf_metadata):
opts = self.opts
page_size = get_page_size(self.opts)
xdpi, ydpi = self.view.logicalDpiX(), self.view.logicalDpiY()
# We cannot set the side margins in the webview as there is no right
# margin for the last page (the margins are implemented with
# -webkit-column-gap)
ml, mr = opts.margin_left, opts.margin_right
self.doc = PdfDevice(out_stream,
page_size=page_size,
left_margin=ml,
top_margin=0,
right_margin=mr,
bottom_margin=0,
xdpi=xdpi,
ydpi=ydpi,
errors=self.log.error,
debug=self.log.debug,
compress=not opts.uncompressed_pdf,
mark_links=opts.pdf_mark_links)
self.footer = opts.pdf_footer_template
if self.footer:
self.footer = self.footer.strip()
if not self.footer and opts.pdf_page_numbers:
self.footer = '<p style="text-align:center; text-indent: 0">_PAGENUM_</p>'
self.header = opts.pdf_header_template
if self.header:
self.header = self.header.strip()
min_margin = 36
if self.footer and opts.margin_bottom < min_margin:
self.log.warn(
'Bottom margin is too small for footer, increasing it.')
opts.margin_bottom = min_margin
if self.header and opts.margin_top < min_margin:
self.log.warn('Top margin is too small for header, increasing it.')
opts.margin_top = min_margin
self.page.setViewportSize(QSize(self.doc.width(), self.doc.height()))
self.render_queue = items
self.total_items = len(items)
mt, mb = map(self.doc.to_px, (opts.margin_top, opts.margin_bottom))
self.margin_top, self.margin_bottom = map(lambda x: int(floor(x)),
(mt, mb))
self.painter = QPainter(self.doc)
self.doc.set_metadata(title=pdf_metadata.title,
author=pdf_metadata.author,
tags=pdf_metadata.tags)
self.doc_title = pdf_metadata.title
self.doc_author = pdf_metadata.author
self.painter.save()
try:
if self.cover_data is not None:
p = QPixmap()
p.loadFromData(self.cover_data)
if not p.isNull():
self.doc.init_page()
draw_image_page(QRect(*self.doc.full_page_rect),
self.painter,
p,
preserve_aspect_ratio=self.opts.
preserve_cover_aspect_ratio)
self.doc.end_page()
finally:
self.painter.restore()
QTimer.singleShot(0, self.render_book)
if self.loop.exec_() == 1:
raise Exception('PDF Output failed, see log for details')
if self.toc is not None and len(self.toc) > 0:
self.doc.add_outline(self.toc)
self.painter.end()
if self.doc.errors_occurred:
raise Exception('PDF Output failed, see log for details')
class PDFWriter(QObject):
def _pass_json_value_getter(self):
val = json.dumps(self.bridge_value)
return QString(val)
def _pass_json_value_setter(self, value):
self.bridge_value = json.loads(unicode(value))
_pass_json_value = pyqtProperty(QString,
fget=_pass_json_value_getter,
fset=_pass_json_value_setter)
@pyqtSlot(result=unicode)
def title(self):
return self.doc_title
@pyqtSlot(result=unicode)
def author(self):
return self.doc_author
@pyqtSlot(result=unicode)
def section(self):
return self.current_section
def __init__(self, opts, log, cover_data=None, toc=None):
from calibre.gui2 import is_ok_to_use_qt
if not is_ok_to_use_qt():
raise Exception('Not OK to use Qt')
QObject.__init__(self)
self.logger = self.log = log
self.opts = opts
self.cover_data = cover_data
self.paged_js = None
self.toc = toc
self.loop = QEventLoop()
self.view = QWebView()
self.page = Page(opts, self.log)
self.view.setPage(self.page)
self.view.setRenderHints(QPainter.Antialiasing
| QPainter.TextAntialiasing
| QPainter.SmoothPixmapTransform)
self.view.loadFinished.connect(self.render_html,
type=Qt.QueuedConnection)
for x in (Qt.Horizontal, Qt.Vertical):
self.view.page().mainFrame().setScrollBarPolicy(
x, Qt.ScrollBarAlwaysOff)
self.report_progress = lambda x, y: x
self.current_section = ''
def dump(self, items, out_stream, pdf_metadata):
opts = self.opts
page_size = get_page_size(self.opts)
xdpi, ydpi = self.view.logicalDpiX(), self.view.logicalDpiY()
# We cannot set the side margins in the webview as there is no right
# margin for the last page (the margins are implemented with
# -webkit-column-gap)
ml, mr = opts.margin_left, opts.margin_right
self.doc = PdfDevice(out_stream,
page_size=page_size,
left_margin=ml,
top_margin=0,
right_margin=mr,
bottom_margin=0,
xdpi=xdpi,
ydpi=ydpi,
errors=self.log.error,
debug=self.log.debug,
compress=not opts.uncompressed_pdf,
mark_links=opts.pdf_mark_links)
self.footer = opts.pdf_footer_template
if self.footer:
self.footer = self.footer.strip()
if not self.footer and opts.pdf_page_numbers:
self.footer = '<p style="text-align:center; text-indent: 0">_PAGENUM_</p>'
self.header = opts.pdf_header_template
if self.header:
self.header = self.header.strip()
min_margin = 36
if self.footer and opts.margin_bottom < min_margin:
self.log.warn(
'Bottom margin is too small for footer, increasing it.')
opts.margin_bottom = min_margin
if self.header and opts.margin_top < min_margin:
self.log.warn('Top margin is too small for header, increasing it.')
opts.margin_top = min_margin
self.page.setViewportSize(QSize(self.doc.width(), self.doc.height()))
self.render_queue = items
self.total_items = len(items)
mt, mb = map(self.doc.to_px, (opts.margin_top, opts.margin_bottom))
self.margin_top, self.margin_bottom = map(lambda x: int(floor(x)),
(mt, mb))
self.painter = QPainter(self.doc)
self.doc.set_metadata(title=pdf_metadata.title,
author=pdf_metadata.author,
tags=pdf_metadata.tags)
self.doc_title = pdf_metadata.title
self.doc_author = pdf_metadata.author
self.painter.save()
try:
if self.cover_data is not None:
p = QPixmap()
p.loadFromData(self.cover_data)
if not p.isNull():
self.doc.init_page()
draw_image_page(QRect(*self.doc.full_page_rect),
self.painter,
p,
preserve_aspect_ratio=self.opts.
preserve_cover_aspect_ratio)
self.doc.end_page()
finally:
self.painter.restore()
QTimer.singleShot(0, self.render_book)
if self.loop.exec_() == 1:
raise Exception('PDF Output failed, see log for details')
if self.toc is not None and len(self.toc) > 0:
self.doc.add_outline(self.toc)
self.painter.end()
if self.doc.errors_occurred:
raise Exception('PDF Output failed, see log for details')
def render_book(self):
if self.doc.errors_occurred:
return self.loop.exit(1)
try:
if not self.render_queue:
self.loop.exit()
else:
self.render_next()
except:
self.logger.exception('Rendering failed')
self.loop.exit(1)
def render_next(self):
item = unicode(self.render_queue.pop(0))
self.logger.debug('Processing %s...' % item)
self.current_item = item
load_html(item, self.view)
def render_html(self, ok):
if ok:
try:
self.do_paged_render()
except:
self.log.exception('Rendering failed')
self.loop.exit(1)
return
else:
# The document is so corrupt that we can't render the page.
self.logger.error('Document cannot be rendered.')
self.loop.exit(1)
return
done = self.total_items - len(self.render_queue)
self.report_progress(
done / self.total_items,
_('Rendered %s' % os.path.basename(self.current_item)))
self.render_book()
@property
def current_page_num(self):
return self.doc.current_page_num
def load_mathjax(self):
evaljs = self.view.page().mainFrame().evaluateJavaScript
mjpath = P(u'viewer/mathjax').replace(os.sep, '/')
if iswindows:
mjpath = u'/' + mjpath
if evaljs('''
window.mathjax.base = %s;
mathjax.check_for_math(); mathjax.math_present
''' % (json.dumps(mjpath, ensure_ascii=False))).toBool():
self.log.debug('Math present, loading MathJax')
while not evaljs('mathjax.math_loaded').toBool():
self.loop.processEvents(self.loop.ExcludeUserInputEvents)
evaljs(
'document.getElementById("MathJax_Message").style.display="none";'
)
def get_sections(self, anchor_map):
sections = {}
ci = os.path.abspath(os.path.normcase(self.current_item))
if self.toc is not None:
for toc in self.toc.flat():
path = toc.abspath or None
frag = toc.fragment or None
if path is None:
continue
path = os.path.abspath(os.path.normcase(path))
if path == ci:
col = 0
if frag and frag in anchor_map:
col = anchor_map[frag]['column']
if col not in sections:
sections[col] = toc.text or _('Untitled')
return sections
def do_paged_render(self):
if self.paged_js is None:
import uuid
from calibre.utils.resources import compiled_coffeescript as cc
self.paged_js = cc('ebooks.oeb.display.utils')
self.paged_js += cc('ebooks.oeb.display.indexing')
self.paged_js += cc('ebooks.oeb.display.paged')
self.paged_js += cc('ebooks.oeb.display.mathjax')
self.hf_uuid = str(uuid.uuid4()).replace('-', '')
self.view.page().mainFrame().addToJavaScriptWindowObject(
"py_bridge", self)
self.view.page().longjs_counter = 0
evaljs = self.view.page().mainFrame().evaluateJavaScript
evaljs(self.paged_js)
self.load_mathjax()
evaljs('''
py_bridge.__defineGetter__('value', function() {
return JSON.parse(this._pass_json_value);
});
py_bridge.__defineSetter__('value', function(val) {
this._pass_json_value = JSON.stringify(val);
});
document.body.style.backgroundColor = "white";
paged_display.set_geometry(1, %d, %d, %d);
paged_display.layout();
paged_display.fit_images();
py_bridge.value = book_indexing.all_links_and_anchors();
''' % (self.margin_top, 0, self.margin_bottom))
amap = self.bridge_value
if not isinstance(amap, dict):
amap = {
'links': [],
'anchors': {}
} # Some javascript error occurred
sections = self.get_sections(amap['anchors'])
col = 0
if self.header:
self.bridge_value = self.header
evaljs('paged_display.header_template = py_bridge.value')
if self.footer:
self.bridge_value = self.footer
evaljs('paged_display.footer_template = py_bridge.value')
if self.header or self.footer:
evaljs('paged_display.create_header_footer("%s");' % self.hf_uuid)
start_page = self.current_page_num
mf = self.view.page().mainFrame()
while True:
if col in sections:
self.current_section = sections[col]
self.doc.init_page()
if self.header or self.footer:
evaljs('paged_display.update_header_footer(%d)' %
self.current_page_num)
self.painter.save()
mf.render(self.painter)
self.painter.restore()
nsl = evaljs('paged_display.next_screen_location()').toInt()
self.doc.end_page()
if not nsl[1] or nsl[0] <= 0:
break
evaljs(
'window.scrollTo(%d, 0); paged_display.position_header_footer();'
% nsl[0])
if self.doc.errors_occurred:
break
col += 1
if not self.doc.errors_occurred:
self.doc.add_links(self.current_item, start_page, amap['links'],
amap['anchors'])
def paintEvent(self, ev):
p = QPainter(self)
p.fillRect(ev.region().boundingRect(), QBrush(QColor(200, 200, 200, 220), Qt.SolidPattern))
p.end()
QLabel.paintEvent(self, ev)
def paintEvent(self, event):
w = self.viewport().rect().width()
painter = QPainter(self.viewport())
painter.setClipRect(event.rect())
floor = event.rect().bottom()
ceiling = event.rect().top()
fv = self.firstVisibleBlock().blockNumber()
origin = self.contentOffset()
doc = self.document()
lines = []
for num, text in self.headers:
top, bot = num, num + 3
if bot < fv:
continue
y_top = self.blockBoundingGeometry(
doc.findBlockByNumber(top)).translated(origin).y()
y_bot = self.blockBoundingGeometry(
doc.findBlockByNumber(bot)).translated(origin).y()
if max(y_top, y_bot) < ceiling:
continue
if min(y_top, y_bot) > floor:
break
painter.setFont(self.heading_font)
br = painter.drawText(3, y_top, w, y_bot - y_top - 5,
Qt.TextSingleLine, text)
painter.setPen(QPen(self.palette().text(), 2))
painter.drawLine(0, br.bottom() + 3, w, br.bottom() + 3)
for top, bot, kind in self.changes:
if bot < fv:
continue
y_top = self.blockBoundingGeometry(
doc.findBlockByNumber(top)).translated(origin).y()
y_bot = self.blockBoundingGeometry(
doc.findBlockByNumber(bot)).translated(origin).y()
if max(y_top, y_bot) < ceiling:
continue
if min(y_top, y_bot) > floor:
break
if y_top != y_bot:
painter.fillRect(0, y_top, w, y_bot - y_top,
self.diff_backgrounds[kind])
lines.append((y_top, y_bot, kind))
if top in self.images:
img, maxw = self.images[top][:2]
if bot > top + 1 and not img.isNull():
y_top = self.blockBoundingGeometry(
doc.findBlockByNumber(top +
1)).translated(origin).y() + 3
y_bot -= 3
scaled, imgw, imgh = fit_image(img.width(), img.height(),
w - 3, y_bot - y_top)
painter.setRenderHint(QPainter.SmoothPixmapTransform, True)
painter.drawPixmap(QRect(3, y_top, imgw, imgh), img)
painter.end()
PlainTextEdit.paintEvent(self, event)
painter = QPainter(self.viewport())
painter.setClipRect(event.rect())
for top, bottom, kind in sorted(lines,
key=lambda
(t, b, k): {'replace': 0}.get(k, 1)):
painter.setPen(QPen(self.diff_foregrounds[kind], 1))
painter.drawLine(0, top, w, top)
painter.drawLine(0, bottom - 1, w, bottom - 1)
def paintEvent(self, ev):
p = QPainter(self)
p.setClipRect(ev.rect())
palette = self.palette()
p.setPen(palette.color(QPalette.WindowText))
if not self.is_first:
p.drawLine(0, 0, self.width(), 0)
try:
for row in self.rows:
for cell in row:
p.save()
try:
cell.draw(p, self.width(), palette)
finally:
p.restore()
finally:
p.end()
def paintEvent(self, ev):
br = ev.region().boundingRect()
p = QPainter(self)
p.setOpacity(0.2)
p.fillRect(br, QBrush(self.palette().text()))
p.end()
QWidget.paintEvent(self, ev)
p = QPainter(self)
p.setClipRect(br)
f = p.font()
f.setBold(True)
f.setPointSize(20)
p.setFont(f)
p.setPen(Qt.SolidLine)
r = QRect(0, self.dummy.geometry().top() + 10, self.geometry().width(), 150)
p.drawText(r, Qt.AlignHCenter | Qt.AlignTop | Qt.TextSingleLine, self.text)
p.end()
def paint_line_numbers(self, ev):
painter = QPainter(self.line_number_area)
painter.fillRect(ev.rect(),
self.line_number_palette.color(QPalette.Base))
block = self.firstVisibleBlock()
num = block.blockNumber()
top = int(
self.blockBoundingGeometry(block).translated(
self.contentOffset()).top())
bottom = top + int(self.blockBoundingRect(block).height())
painter.setPen(self.line_number_palette.color(QPalette.Text))
change_starts = {x[0] for x in self.changes}
while block.isValid() and top <= ev.rect().bottom():
r = ev.rect()
if block.isVisible() and bottom >= r.top():
text = unicode(self.line_number_map.get(num, ''))
is_start = text != '-' and num in change_starts
if is_start:
painter.save()
f = QFont(self.font())
f.setBold(True)
painter.setFont(f)
painter.setPen(
self.line_number_palette.color(QPalette.BrightText))
if text == '-':
painter.drawLine(r.left() + 2, (top + bottom) // 2,
r.right() - 2, (top + bottom) // 2)
else:
if self.right:
painter.drawText(r.left() + 3, top, r.right(),
self.fontMetrics().height(),
Qt.AlignLeft, text)
else:
painter.drawText(r.left() + 2, top,
r.right() - 5,
self.fontMetrics().height(),
Qt.AlignRight, text)
if is_start:
painter.restore()
block = block.next()
top = bottom
bottom = top + int(self.blockBoundingRect(block).height())
num += 1
class PaintBoard(QWidget):
# Define virtual panel coordinates for different shapes/regions
VPCoord_Start = [316, 332] #LeftTopX, Y
VPCoord_Circle = [316, 332, 336, 363] #LeftTopX, Y, RightBotX, Y
VPCoord_Rect = [336, 332, 356, 363] #LeftTopX, Y, RightBotX, Y
VPCoord_Tri = [316, 363, 336, 395] #LeftTopX, Y, RightBotX, Y
VPCoord_Line = [336, 363, 356, 395] #LeftTopX, Y, RightBotX, Y
# A flag to check if the user is currently using the virtual panel
usingVP = False
def __init__(self, sizeX, sizeY, Parent=None):
'''
Constructor
'''
super(PaintBoard, self).__init__(Parent)
self.__InitData(sizeX,
sizeY) #Initialize Data first, then interface/view
self.__InitView()
print("Init PaintBoard")
def __InitView(self):
self.setFixedSize(self.__size)
def __InitData(self, sizeX, sizeY):
self.__size = QSize(sizeX, sizeY)
self.__board = QPixmap(
self.__size) # Make a new QPixmap as paint board，350px * 250px
self.__board.fill(Qt.white) #Fill the paint board with white
self.__IsEmpty = True #board is empty by default
self.EraserMode = False #eraser mode is disabled by default
self.__lastPos = None
self.__currentPos = QPoint(0, 0)
self.__painter = QPainter()
self.__thickness = 1 #default pen thickness is 1
self.__penColor = QColor("black") #default color is black
self.__colorList = QColor.colorNames() #get the list of colors
def Clear(self):
#Clear the board
self.__board.fill(Qt.white)
self.update()
self.__IsEmpty = True
def ChangePenColor(self, color="black"):
self.__penColor = QColor(color)
def ChangePenThickness(self, thickness=1):
self.__thickness = thickness
def IsEmpty(self):
#Is the board empty
return self.__IsEmpty
def GetContentAsQImage(self):
#return the content of the board (return QImage)
image = self.__board.toImage()
return image
def paintEvent(self, paintEvent):
self.__painter.begin(self)
self.__painter.drawPixmap(0, 0, self.__board)
self.__painter.end()
# print("inside paintEvent")
def penPressEvent(self, pos):
self.__currentPos = QPoint(pos[0], pos[1])
self.__lastPos = self.__currentPos
def penMoveEvent(self, pos, pressure, liftedDeque):
pen_x = pos[0]
pen_y = pos[1]
pen_pressure = pressure
# print(liftedDeque)
# print(self.__lastPos)
if self.__lastPos is None:
self.__lastPos = QPoint(pen_x, pen_y)
self.__currentPos = QPoint(pen_x, pen_y)
self.__painter.begin(self.__board)
if self.EraserMode == False:
#Non-Eraser mode
self.__penColor = QColor("blue")
self.__painter.setPen(QPen(
self.__penColor, self.__thickness)) #Set pen color, thickness
else:
#Eraser mode: pen color is white, thickness is 6
self.__painter.setPen(QPen(Qt.white, 6))
self.__painter.drawLine(self.__lastPos, self.__currentPos)
self.__painter.end()
self.__lastPos = self.__currentPos
self.update() #Show updates
# If ever detected the pen is lifted, reset the __lastPos variable in order to reposition the pen
if (True in liftedDeque):
self.__lastPos = None
# Virtual Panel event
def penVPEvent(self, pos, pressure):
pass
'''
# Check if the pressure is over 500
if(pen_pressure > 400):
# Check which region the pen is in and prepare to draw shape accordingly
if(pen_x < self.VPCoord_Circle[2] and pen_y < self.VPCoord_Circle[3]):
print("A")
elif(pen_x < self.VPCoord_Rect[2] and pen_y < self.VPCoord_Rect[3]):
print("B")
elif(pen_x < self.VPCoord_Tri[2] and pen_y < self.VPCoord_Tri[3]):
print("C")
elif(pen_x < self.VPCoord_Line[2] and pen_y < self.VPCoord_Line[3]):
print("D")
'''
def penReleaseEvent(self, pos):
self.__IsEmpty = False #board is not empty
def paintEllipse(self, center_x, center_y, radias1, radias2):
self.__painter.begin(self.__board)
self.__penColor = QColor("black")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
self.__painter.drawEllipse(QPoint(center_x, center_y), radias1,
radias2)
self.__painter.end()
self.update() #Show updates
def paintRect(self, center_x, center_y, upper_left_x, upper_left_y):
width = abs(2 * (center_x - upper_left_x))
height = abs(2 * (center_y - upper_left_y))
self.__painter.begin(self.__board)
self.__penColor = QColor("black")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
self.__painter.drawRect(upper_left_x, upper_left_y, width, height)
self.__painter.end()
self.update() #Show updates
def paintTriangle(self, points):
self.__painter.begin(self.__board)
self.__penColor = QColor("black")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
self.__painter.drawPolygon(points)
self.__painter.end()
self.update() #Show updates
def paintPolyg(self, x1, y1, x2, y2, x3, y3, x4, y4):
self.__painter.begin(self.__board)
self.__penColor = QColor("black")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
self.__painter.drawPolygon(QPoint(x1, y1), QPoint(x2, y2),
QPoint(x3, y3), QPoint(x4, y4))
self.__painter.end()
self.update() #Show updates
def paintLine(self, P1_x, P1_y, P2_x, P2_y):
P1 = QPoint(P1_x, P1_y)
P2 = QPoint(P2_x, P2_y)
self.__painter.begin(self.__board)
self.__penColor = QColor("black")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
self.__painter.drawLine(P1, P2)
self.__painter.end()
self.update() #Show updates
def paintAuxLine(self, P1_x, P1_y, P2_x, P2_y):
P1 = QPoint(P1_x, P1_y)
P2 = QPoint(P2_x, P2_y)
self.__painter.begin(self.__board)
self.__penColor = QColor("red")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
self.__painter.drawLine(P1, P2)
self.__painter.end()
self.update() #Show updates
def PointsInCircum(self, r, n, phi):
return [(math.cos(2 * pi / n * x + phi) * r,
math.sin(2 * pi / n * x + phi) * r) for x in range(0, n + 1)
] # defining the points on the Circum of a circle
def paintPCircle(self, center_x, center_y, start_x, start_y, pers_x,
pers_y):
point = [start_x, start_y]
center = [center_x, center_y]
distance = [(point[0] - center[0]), (point[1] - center[1])]
phi = math.atan2(distance[1], distance[0])
r = math.sqrt(distance[0] * distance[0] + distance[1] * distance[1])
points = self.PointsInCircum(r, 300, phi)
#Drawing the circle in perspective
dist_x = center_x - pers_x
print("dist_x", dist_x, pers_x, pers_y, center_x, center_y)
points = [(j[0], (j[1] + center_x - pers_y) *
((j[0] + center_x) / dist_x) + pers_y - center_y)
for j in points]
self.__painter.begin(self.__board)
self.__penColor = QColor("blue")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
for x in points:
self.__painter.drawPoint(round(x[0] + center[0], 3),
round(x[1] / 1.00 + center[1], 3))
self.__painter.end()
# returns true if given angle is in the second quadrant;
# requires angle in degree and in range -180 to 180
def _isAngleInSecondQuadrant(self, angle):
if angle > 90 and angle < 180:
return True
else:
return False
# returns true if given angle is in the third quadrant;
# requires angle in degree and in range -180 to 180
def _isAngleInThirdQuadrant(self, angle):
if angle < -90 and angle > -180:
return True
else:
return False
def paintArc(self, center_x, center_y, start_x, start_y, end_x, end_y):
radius = math.sqrt(
math.pow(center_x - start_x, 2) + math.pow(center_y - start_y, 2))
rect = QRectF(center_x - radius, center_y - radius, radius * 2,
radius * 2)
# start angle calculation
startAngle = math.degrees(
math.atan2(center_y - start_y, start_x - center_x))
# end angle calculation
endAngle = math.degrees(math.atan2(center_y - end_y, end_x - center_x))
# span angle calculation
spanAngle = endAngle - startAngle
# assume user always wants to draw clock-wise
if spanAngle > 0:
spanAngle = -1 * (360 - spanAngle)
#print("start angle is " + str(startAngle))
#print("span angle is " + str(spanAngle))
self.__painter.begin(self.__board)
self.__penColor = QColor("black")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
self.__painter.drawArc(rect, 16 * startAngle, 16 * spanAngle)
self.__painter.end()
self.update() #Show updates
def paintAuxArc(self, center_x, center_y, start_x, start_y, end_x, end_y):
radius = math.sqrt(
math.pow(center_x - start_x, 2) + math.pow(center_y - start_y, 2))
rect = QRectF(center_x - radius, center_y - radius, radius * 2,
radius * 2)
# start angle calculation
startAngle = math.degrees(
math.atan2(center_y - start_y, start_x - center_x))
# end angle calculation
endAngle = math.degrees(math.atan2(center_y - end_y, end_x - center_x))
# span angle calculation
spanAngle = 0
if (self._isAngleInThirdQuadrant(startAngle)
and self._isAngleInSecondQuadrant(endAngle)
) or (self._isAngleInThirdQuadrant(endAngle)
and self._isAngleInSecondQuadrant(startAngle)) or (
startAngle == 180
and self._isAngleInThirdQuadrant(endAngle)
) or (startAngle == -180
and self._isAngleInSecondQuadrant(endAngle)) or (
endAngle == 180
and self._isAngleInThirdQuadrant(startAngle)) or (
endAngle == -180
and self._isAngleInSecondQuadrant(startAngle)):
if startAngle == 180 or self._isAngleInThirdQuadrant(startAngle):
spanAngle = endAngle - (startAngle + 360)
else:
spanAngle = (endAngle + 360) - startAngle
else:
spanAngle = endAngle - startAngle
#print("start angle is " + str(startAngle))
#print("span angle is " + str(spanAngle))
self.__painter.begin(self.__board)
self.__penColor = QColor("red")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
self.__painter.drawArc(rect, 16 * startAngle, 16 * spanAngle)
self.__painter.end()
self.update() #Show updates
def paintBezierSpline(self, pointListX, pointListY):
P1 = QPoint(int(pointListX[0]), int(pointListY[0]))
path = QtGui.QPainterPath()
path.moveTo(P1)
self.__painter.begin(self.__board)
self.__penColor = QColor("black")
self.__painter.setPen(QPen(self.__penColor, self.__thickness))
i = 0
while i < len(pointListX) - 3:
P2 = QPoint(int(pointListX[i + 1]), int(pointListY[i + 1]))
P3 = QPoint(int(pointListX[i + 2]), int(pointListY[i + 2]))
P4 = QPoint(int(pointListX[i + 3]), int(pointListY[i + 3]))
path.cubicTo(P2, P3, P4)
self.__painter.drawPath(path)
i += 3
self.__painter.end()
self.update() #Show updates
def paintEvent(self, event):
QSplitterHandle.paintEvent(self, event)
left, right = self.parent().left, self.parent().right
painter = QPainter(self)
painter.setClipRect(event.rect())
w = self.width()
h = self.height()
painter.setRenderHints(QPainter.Antialiasing, True)
C = 16 # Curve factor.
def create_line(ly, ry, right_to_left=False):
' Create path that represents upper or lower line of change marker '
line = QPainterPath()
if not right_to_left:
line.moveTo(0, ly)
line.cubicTo(C, ly, w - C, ry, w, ry)
else:
line.moveTo(w, ry)
line.cubicTo(w - C, ry, C, ly, 0, ly)
return line
ldoc, rdoc = left.document(), right.document()
lorigin, rorigin = left.contentOffset(), right.contentOffset()
lfv, rfv = left.firstVisibleBlock().blockNumber(
), right.firstVisibleBlock().blockNumber()
lines = []
for (ltop, lbot, kind), (rtop, rbot,
kind) in zip(left.changes, right.changes):
if lbot < lfv and rbot < rfv:
continue
ly_top = left.blockBoundingGeometry(
ldoc.findBlockByNumber(ltop)).translated(lorigin).y()
ly_bot = left.blockBoundingGeometry(
ldoc.findBlockByNumber(lbot)).translated(lorigin).y()
ry_top = right.blockBoundingGeometry(
rdoc.findBlockByNumber(rtop)).translated(rorigin).y()
ry_bot = right.blockBoundingGeometry(
rdoc.findBlockByNumber(rbot)).translated(rorigin).y()
if max(ly_top, ly_bot, ry_top, ry_bot) < 0:
continue
if min(ly_top, ly_bot, ry_top, ry_bot) > h:
break
upper_line = create_line(ly_top, ry_top)
lower_line = create_line(ly_bot, ry_bot, True)
region = QPainterPath()
region.moveTo(0, ly_top)
region.connectPath(upper_line)
region.lineTo(w, ry_bot)
region.connectPath(lower_line)
region.closeSubpath()
painter.fillPath(region, left.diff_backgrounds[kind])
for path, aa in zip((upper_line, lower_line),
(ly_top != ry_top, ly_bot != ry_bot)):
lines.append((kind, path, aa))
for kind, path, aa in sorted(
lines, key=lambda x: {'replace': 0}.get(x[0], 1)):
painter.setPen(left.diff_foregrounds[kind])
painter.setRenderHints(QPainter.Antialiasing, aa)
painter.drawPath(path)
painter.setFont(left.heading_font)
for (lnum, text), (rnum, text) in zip(left.headers, right.headers):
ltop, lbot, rtop, rbot = lnum, lnum + 3, rnum, rnum + 3
if lbot < lfv and rbot < rfv:
continue
ly_top = left.blockBoundingGeometry(
ldoc.findBlockByNumber(ltop)).translated(lorigin).y()
ly_bot = left.blockBoundingGeometry(
ldoc.findBlockByNumber(lbot)).translated(lorigin).y()
ry_top = right.blockBoundingGeometry(
rdoc.findBlockByNumber(rtop)).translated(rorigin).y()
ry_bot = right.blockBoundingGeometry(
rdoc.findBlockByNumber(rbot)).translated(rorigin).y()
if max(ly_top, ly_bot, ry_top, ry_bot) < 0:
continue
if min(ly_top, ly_bot, ry_top, ry_bot) > h:
break
ly = painter.boundingRect(3, ly_top, left.width(),
ly_bot - ly_top - 5, Qt.TextSingleLine,
text).bottom() + 3
ry = painter.boundingRect(3, ry_top, right.width(),
ry_bot - ry_top - 5, Qt.TextSingleLine,
text).bottom() + 3
line = create_line(ly, ry)
painter.setPen(QPen(left.palette().text(), 2))
painter.setRenderHints(QPainter.Antialiasing, ly != ry)
painter.drawPath(line)
painter.end()
# Paint the splitter without the change lines if the mouse is over the
# splitter
if getattr(self, 'hover', False):
QSplitterHandle.paintEvent(self, event)
def paintEvent(self, event):
contents_y = self.edit.verticalScrollBar().value()
page_bottom = contents_y + self.edit.viewport().height()
font_metrics = self.fontMetrics()
current_block = self.edit.document().findBlock(
self.edit.textCursor().position())
painter = QPainter(self)
line_count = 0
# Iterate over all text blocks in the document.
block = self.edit.document().begin()
while block.isValid():
line_count += 1
# The top left position of the block in the document
position = self.edit.document().documentLayout().blockBoundingRect(
block).topLeft()
# Check if the position of the block is out side of the visible
# area.
if position.y() > page_bottom:
break
# We want the line number for the selected line to be bold.
bold = False
if block == current_block:
bold = True
font = painter.font()
font.setBold(True)
painter.setFont(font)
# Draw the line number right justified at the y position of the
# line. 3 is a magic padding number. drawText(x, y, text).
painter.drawText(
self.width() - font_metrics.width(str(line_count)) - 3,
round(position.y()) - contents_y + font_metrics.ascent(),
str(line_count))
# Remove the bold style if it was set previously.
if bold:
font = painter.font()
font.setBold(False)
painter.setFont(font)
block = block.next()
self.highest_line = line_count
painter.end()
QWidget.paintEvent(self, event)
def paintEvent(self, ev):
br = ev.region().boundingRect()
QWidget.paintEvent(self, ev)
p = QPainter(self)
p.setClipRect(br)
f = p.font()
f.setBold(True)
f.setPointSize(20)
p.setFont(f)
p.setPen(Qt.SolidLine)
r = QRect(0, self.dummy.geometry().top() + 10, self.geometry().width(), 150)
p.drawText(r, Qt.AlignHCenter | Qt.AlignTop | Qt.TextSingleLine, self.text)
p.end()
def numberbarPaint(self, number_bar, event):
font_metrics = self.fontMetrics()
# edit_font = self.font()
current_line = self.document().findBlock(
self.textCursor().position()).blockNumber() + 1
block = self.firstVisibleBlock()
# block = self.document().findBlock(2)
# block = self.document().firstBlock()
line_count = block.blockNumber()
painter = QPainter(number_bar)
# baseBrush=self.palette().light()
# baseBrush.setColor(Qt.darkGray)
painter.fillRect(event.rect(), self.palette().light())
# Iterate over all visible text blocks in the document.
while block.isValid():
line_count += 1
block_bounding_rect = self.blockBoundingGeometry(
block).translated(self.contentOffset())
block_top = block_bounding_rect.top()
# block_top_middle=block_top + font_metrics.height()/2
# f.write('line_count: %s , %s' % (line_count,block_top))
# Check if the position of the block is out side of the visible
# area.
if not block.isVisible() or block_top >= event.rect().bottom():
break
# pass
# We want the line number for the selected line to be bold.
if line_count == current_line:
font = painter.font()
font.setBold(True)
# font.setPointSize(font.pointSize() * 2)
# painter.setFont(font)
else:
font = painter.font()
font.setBold(False)
# font.setPointSize(font.pointSize() * 2)
# print 'painter font size',font.pointSize(),
# '--->',font.pointSize()*2
edit_font_size = self.font().pointSize()
if edit_font_size > 0:
font.setPointSize(edit_font_size)
painter.setFont(font)
# font.setPointSize(20)
# Draw the line number right justified at the position of the
# line.
paint_rect = QRect(
0, block_top, number_bar.width(),
font_metrics.height()) # edit_font.pixelSize())
painter.drawText(paint_rect, Qt.AlignRight,
unicode(line_count))
block = block.next()
painter.end()
def paint_line_numbers(self, ev):
painter = QPainter(self.line_number_area)
painter.fillRect(ev.rect(),
self.line_number_palette.color(QPalette.Base))
block = self.firstVisibleBlock()
num = block.blockNumber()
top = int(
self.blockBoundingGeometry(block).translated(
self.contentOffset()).top())
bottom = top + int(self.blockBoundingRect(block).height())
current = self.textCursor().block().blockNumber()
painter.setPen(self.line_number_palette.color(QPalette.Text))
while block.isValid() and top <= ev.rect().bottom():
if block.isVisible() and bottom >= ev.rect().top():
if current == num:
painter.save()
painter.setPen(
self.line_number_palette.color(QPalette.BrightText))
f = QFont(self.font())
f.setBold(True)
painter.setFont(f)
self.last_current_lnum = (top, bottom - top)
painter.drawText(0, top,
self.line_number_area.width() - 5,
self.fontMetrics().height(), Qt.AlignRight,
str(num + 1))
if current == num:
painter.restore()
block = block.next()
top = bottom
bottom = top + int(self.blockBoundingRect(block).height())
num += 1
def numberbarPaint(self, number_bar, event):
font_metrics = self.fontMetrics()
current_line = self.document().findBlock(
self.textCursor().position()).blockNumber() + 1
block = self.firstVisibleBlock()
line_count = block.blockNumber()
painter = QPainter(number_bar)
painter.fillRect(event.rect(), self.palette().base())
# Iterate over all visible text blocks in the document.
while block.isValid():
line_count += 1
block_top = self.blockBoundingGeometry(block).translated(
self.contentOffset()).top()
# Check if the position of the block is out side of the visible
# area.
if not block.isVisible() or block_top >= event.rect().bottom():
break
# We want the line number for the selected line to be bold.
if line_count == current_line:
font = painter.font()
font.setBold(True)
painter.setFont(font)
else:
font = painter.font()
font.setBold(False)
painter.setFont(font)
# Draw the line number right justified at the position of the line.
paint_rect = QRect(0, block_top, number_bar.width(),
font_metrics.height())
painter.drawText(paint_rect, Qt.AlignRight,
unicode(line_count))
block = block.next()
painter.end()
def numberbarPaint(self, number_bar, event):
font_metrics = self.fontMetrics()
current_line = self.document().findBlock(self.textCursor().position()).blockNumber() + 1
block = self.firstVisibleBlock()
line_count = block.blockNumber()
painter = QPainter(number_bar)
painter.fillRect(event.rect(), self.palette().base())
# Iterate over all visible text blocks in the document.
while block.isValid():
line_count += 1
block_top = self.blockBoundingGeometry(block).translated(self.contentOffset()).top()
# Check if the position of the block is out side of the visible
# area.
if not block.isVisible() or block_top >= event.rect().bottom():
break
# We want the line number for the selected line to be bold.
if line_count == current_line:
font = painter.font()
font.setBold(True)
painter.setFont(font)
else:
font = painter.font()
font.setBold(False)
painter.setFont(font)
# Draw the line number right justified at the position of the line.
paint_rect = QRect(0, block_top, number_bar.width(), font_metrics.height())
painter.drawText(paint_rect, Qt.AlignRight, unicode(line_count))
block = block.next()
painter.end()
def paintEvent(self, ev):
offset = QPoint(0, 0)
p = QPainter(self)
p.setClipRect(ev.rect())
bottom = self.rect().bottom()
if self.results:
for i, (prefix, full, text) in enumerate(self.results):
size = prefix.size()
if offset.y() + size.height() > bottom:
break
self.max_result = i
offset.setX(0)
if i in (self.current_result, self.mouse_hover_result):
p.save()
if i != self.current_result:
p.setPen(Qt.DotLine)
p.drawLine(offset, QPoint(self.width(), offset.y()))
p.restore()
offset.setY(offset.y() + self.MARGIN // 2)
p.drawStaticText(offset, prefix)
offset.setX(self.maxwidth + 5)
p.drawStaticText(offset, self.divider)
offset.setX(offset.x() + self.divider.size().width())
p.drawStaticText(offset, full)
offset.setY(offset.y() + size.height() + self.MARGIN // 2)
if i in (self.current_result, self.mouse_hover_result):
offset.setX(0)
p.save()
if i != self.current_result:
p.setPen(Qt.DotLine)
p.drawLine(offset, QPoint(self.width(), offset.y()))
p.restore()
else:
p.drawText(self.rect(), Qt.AlignCenter, _('No results found'))
p.end()
def paintEvent(self, event):
QWidget.paintEvent(self, event)
pmap = self._pixmap
if pmap.isNull():
return
w, h = pmap.width(), pmap.height()
ow, oh = w, h
cw, ch = self.rect().width(), self.rect().height()
scaled, nw, nh = fit_image(w, h, cw, ch)
if scaled:
pmap = pmap.scaled(nw, nh, Qt.IgnoreAspectRatio,
Qt.SmoothTransformation)
w, h = pmap.width(), pmap.height()
x = int(abs(cw - w)/2.)
y = int(abs(ch - h)/2.)
target = QRect(x, y, w, h)
p = QPainter(self)
p.setRenderHints(QPainter.Antialiasing | QPainter.SmoothPixmapTransform)
p.drawPixmap(target, pmap)
if self.draw_border:
pen = QPen()
pen.setWidth(self.BORDER_WIDTH)
p.setPen(pen)
p.drawRect(target)
if self.show_size:
sztgt = target.adjusted(0, 0, 0, -4)
f = p.font()
f.setBold(True)
p.setFont(f)
sz = u'\u00a0%d x %d\u00a0'%(ow, oh)
flags = Qt.AlignBottom|Qt.AlignRight|Qt.TextSingleLine
szrect = p.boundingRect(sztgt, flags, sz)
p.fillRect(szrect.adjusted(0, 0, 0, 4), QColor(0, 0, 0, 200))
p.setPen(QPen(QColor(255,255,255)))
p.drawText(sztgt, flags, sz)
p.end()
def paintEvent(self, event):
canvas_size = self.rect()
width = self.current_pixmap_size.width()
extrax = canvas_size.width() - width
if extrax < 0: extrax = 0
x = int(extrax / 2.)
height = self.current_pixmap_size.height()
extray = canvas_size.height() - height
if extray < 0: extray = 0
y = int(extray / 2.)
target = QRect(x, y, width, height)
p = QPainter(self)
p.setRenderHints(QPainter.Antialiasing
| QPainter.SmoothPixmapTransform)
p.drawPixmap(
target,
self.pixmap.scaled(target.size(), Qt.KeepAspectRatio,
Qt.SmoothTransformation))
if gprefs['bd_overlay_cover_size']:
sztgt = target.adjusted(0, 0, 0, -4)
f = p.font()
f.setBold(True)
p.setFont(f)
sz = u'\u00a0%d x %d\u00a0' % (self.pixmap.width(),
self.pixmap.height())
flags = Qt.AlignBottom | Qt.AlignRight | Qt.TextSingleLine
szrect = p.boundingRect(sztgt, flags, sz)
p.fillRect(szrect.adjusted(0, 0, 0, 4), QColor(0, 0, 0, 200))
p.setPen(QPen(QColor(255, 255, 255)))
p.drawText(sztgt, flags, sz)
p.end()
def paintEvent(self, event):
h = self.size().height()
w = self.size().width()
contents_y = self.edit.verticalScrollBar().value()
page_bottom = contents_y + self.edit.viewport().height()
font_metrics = self.fontMetrics()
painter = QPainter(self)
painter.setBackgroundMode(QtCore.Qt.OpaqueMode)
bgc = QtGui.QColor(0, 0, 0)
painter.fillRect(0, 0, w, h, bgc)
numbersborderc = QtGui.QColor(55, 75, 75)
painter.setPen(numbersborderc)
painter.drawLine(w - 1, 0, w - 1, h)
bg = QtGui.QBrush(bgc)
painter.setBackground(bg)
textc = QtGui.QColor(55, 255, 255)
painter.setPen(textc)
fg = QtGui.QBrush(bgc)
painter.setBrush(fg)
line_count = 0
# Iterate over all text blocks in the document.
block = self.edit.document().begin()
while block.isValid():
line_count += 1
# The top left position of the block in the document
position = self.edit.document().documentLayout().blockBoundingRect(
block).topLeft()
# Draw the line number right justified at the y position of the
# line. 3 is a magic padding number. drawText(x, y, text).
painter.drawText(
self.width() - font_metrics.width(str(line_count)) - 8,
round(position.y()) - contents_y + font_metrics.ascent(),
str(line_count))
block = block.next()
self.highest_line = line_count
painter.end()
QWidget.paintEvent(self, event)
def create_icon(text, palette=None, sz=32, divider=2):
if palette is None:
palette = QApplication.palette()
img = QImage(sz, sz, QImage.Format_ARGB32)
img.fill(Qt.transparent)
p = QPainter(img)
p.setRenderHints(p.TextAntialiasing | p.Antialiasing)
qDrawShadeRect(p,
img.rect(),
palette,
fill=QColor('#ffffff'),
lineWidth=1,
midLineWidth=1)
f = p.font()
f.setFamily('Liberation Sans'), f.setPixelSize(sz //
divider), f.setBold(True)
p.setFont(f), p.setPen(Qt.black)
p.drawText(img.rect().adjusted(2, 2, -2, -2), Qt.AlignCenter, text)
p.end()
return QIcon(QPixmap.fromImage(img))
