def paintEvent(self, event):
painter = QPainter()
painter.begin(self)
painter.setRenderHint(QPainter.Antialiasing)
painter.setPen(QPen(Qt.NoPen))
painter.setBrush(QBrush(self.palette().color(QPalette.Highlight)))
num = 8
painter.translate(self.width()/2, self.height()/2)
painter.rotate(360.0/num * (self.counter % num))
for i in range(num):
s = 25 + i
x = 50 * math.cos(2.0 * math.pi * i / num) - s/2.0
y = 50 * math.sin(2.0 * math.pi * i / num) - s/2.0
painter.drawEllipse(
x,
y,
s, s)
painter.end()
def paintEvent(self, event):
if not self.displayedWhenStopped and not self.isAnimated():
return
width = min(self.width(), self.height())
p = QPainter(self)
p.setRenderHint(QPainter.Antialiasing)
outerRadius = (width-1) * 0.5
innerRadius = (width-1) * 0.5 * 0.38
capsuleHeight = outerRadius - innerRadius
capsuleWidth = capsuleHeight * 0.23 if width > 32 else capsuleHeight * 0.35
capsuleRadius = capsuleWidth / 2
for i in range(12):
color = QColor(self.color)
color.setAlphaF(float(1.0 - float(i / 12.0)))
p.setPen(Qt.NoPen)
p.setBrush(color)
p.save()
p.translate(self.rect().center())
p.rotate(self.angle - float(i * 30.0))
p.drawRoundedRect(-capsuleWidth * 0.5,\
-(innerRadius + capsuleHeight),\
capsuleWidth,\
capsuleHeight,\
capsuleRadius,\
capsuleRadius)
p.restore()
def paintEvent(self, _):
s = QToolButton.sizeHint(self)
r = 0
p = QPoint()
if self.direction == QBoxLayout.TopToBottom:
r = 90
p = QPoint(0, -s.height())
elif self.direction == QBoxLayout.BottomToTop:
r = -90
p = QPoint(-s.width(), 0)
pixmap = QPixmap(s)
pixmap.fill(QColor(0, 0, 0, 0))
o = QStyleOptionToolButton()
self.initStyleOption(o)
o.rect.setSize(s)
pixpainter = QPainter()
pixpainter.begin(pixmap)
self.style().drawComplexControl(QStyle.CC_ToolButton, o, pixpainter,
self)
pixpainter.end()
painter = QPainter(self)
painter.rotate(r)
painter.drawPixmap(p, pixmap)
def paintEvent(self, event):
""" custom paint event to draw vertical text """
painter = QPainter(self)
# draw box around
arc_size, line_width=10, 1
pen = QPen(QtCore.Qt.gray)
pen.setWidth(line_width)
painter.setPen(pen)
painter.drawLine(arc_size,0, self.width(), 0)
painter.drawLine(0, arc_size,0, self.height()-arc_size)
painter.drawLine(arc_size-5,self.height()-1,self.width(), self.height()-1)
painter.drawArc(0,0, arc_size*2, arc_size*2, 180*16, -90*16)
painter.drawArc(0,self.height()-arc_size*2, arc_size*2, arc_size*2, 180*16, 90*16)
# draw box around
#if (self.isEnabled()):
if self.selected:
painter.setPen(QtCore.Qt.black)
else:
painter.setPen(QtCore.Qt.gray)
painter.translate(self.width(), self.height())
painter.rotate(270)
painter.drawText(QtCore.QPointF(10,- self.width()/3), self.text())
# destroy
del painter
def paintEvent(self, event):
""" custom paint event to draw vertical text """
painter = QPainter(self)
# draw box around
arc_size, line_width = 10, 1
pen = QPen(QtCore.Qt.gray)
pen.setWidth(line_width)
painter.setPen(pen)
painter.drawLine(arc_size, 0, self.width(), 0)
painter.drawLine(0, arc_size, 0, self.height() - arc_size)
painter.drawLine(arc_size - 5,
self.height() - 1, self.width(),
self.height() - 1)
painter.drawArc(0, 0, arc_size * 2, arc_size * 2, 180 * 16, -90 * 16)
painter.drawArc(0,
self.height() - arc_size * 2, arc_size * 2,
arc_size * 2, 180 * 16, 90 * 16)
# draw box around
#if (self.isEnabled()):
if self.selected:
painter.setPen(QtCore.Qt.black)
else:
painter.setPen(QtCore.Qt.gray)
painter.translate(self.width(), self.height())
painter.rotate(270)
painter.drawText(QtCore.QPointF(10, -self.width() / 3), self.text())
# destroy
del painter
def paintEvent(self, _):
s = QToolButton.sizeHint(self)
r = 0
p = QPoint()
if self.direction == QBoxLayout.TopToBottom:
r = 90
p = QPoint(0, -s.height())
elif self.direction == QBoxLayout.BottomToTop:
r = -90
p = QPoint(-s.width(), 0)
pixmap = QPixmap(s)
pixmap.fill(QColor(0, 0, 0, 0))
o = QStyleOptionToolButton()
self.initStyleOption(o)
o.rect.setSize(s)
pixpainter = QPainter()
pixpainter.begin(pixmap)
self.style().drawComplexControl(QStyle.CC_ToolButton, o, pixpainter, self)
pixpainter.end()
painter = QPainter(self)
painter.rotate(r)
painter.drawPixmap(p, pixmap)
def paintEvent(self, event):
painter=QPainter(self)
angleSpan = self.m_endAngle - self.m_startAngle
valueSpan = self.m_maximum - self.m_minimum
rotate = (self.m_value - self.m_minimum) / valueSpan * angleSpan + self.m_startAngle
targetRect = self.availableRect(self.m_backgroundRenderer)
painter.translate((self.width() - targetRect.width()) / 2.0, (self.height() - targetRect.height()) / 2.0)
painter.save()
self.m_backgroundRenderer.render(painter, targetRect)
targetRect = self.availableRect(self.m_needleRenderer)
targetRect.moveTopLeft(QPointF(-targetRect.width() * self.m_originX,
-targetRect.height() * self.m_originY))
painter.translate(targetRect.width() * self.m_originX,
targetRect.height() * self.m_originY)
painter.save()
painter.translate(2, 4)
painter.rotate(rotate)
self.m_needleShadowRenderer.render(painter, targetRect)
painter.restore()
painter.rotate(rotate)
self.m_needleRenderer.render(painter, targetRect)
painter.restore();
if self.m_showOverlay:
targetRect = self.availableRect(self.m_overlayRenderer)
self.m_overlayRenderer.render(painter, targetRect)
def paintEvent(self, event):
'Paint semi-transparent background, animated pattern, background text'
QWidget.paintEvent(self, event)
# make a painter
p = QPainter(self)
p.setRenderHint(QPainter.TextAntialiasing)
p.setRenderHint(QPainter.HighQualityAntialiasing)
# fill a rectangle with transparent painting
p.fillRect(event.rect(), Qt.transparent)
# animated random dots background pattern
for i in range(4096):
x = randint(9, self.size().width() - 9)
y = randint(9, self.size().height() - 9)
p.setPen(QPen(QColor(randint(200, 255), randint(200, 255), 255), 1))
p.drawPoint(x, y)
# set pen to use white color
p.setPen(QPen(QColor(randint(9, 255), randint(9, 255), 255), 1))
# Rotate painter 45 Degree
p.rotate(35)
# Set painter Font for text
p.setFont(QFont('Ubuntu', 300))
# draw the background text, with antialiasing
p.drawText(99, 199, "Radio")
# Rotate -45 the QPen back !
p.rotate(-35)
# set the pen to no pen
p.setPen(Qt.NoPen)
# Background Color
p.setBrush(QColor(0, 0, 0))
# Background Opacity
p.setOpacity(0.75)
# Background Rounded Borders
p.drawRoundedRect(self.rect(), 50, 50)
# finalize the painter
p.end()
def create_major_ticks(self):
"""
Painter of the major ticks
"""
painter = QPainter(self)
painter.setRenderHint(QPainter.Antialiasing)
# Koordinatenursprung in die Mitte der Flaeche legen
painter.translate(*self.center_p())
# painter.setPen(Qt.NoPen)
# Major ticks color
self.pen = QPen(QColor(0, 0, 0, 255))
self.pen.setWidth(2)
# # if outline_pen_with > 0:
painter.setPen(self.pen)
painter.rotate(self.scale_angle_start_value - self.angle_offset)
steps_size = (float(self.scale_angle_size) /
float(self.scala_main_count))
scale_line_outer_start = self.widget_diameter / 2
scale_line_lenght = (self.widget_diameter /
2) - (self.widget_diameter / 20)
# print(stepszize)
for i in range(self.scala_main_count + 1):
painter.drawLine(scale_line_lenght, 0, scale_line_outer_start, 0)
painter.rotate(steps_size)
def paintEvent(self, event):
painter = QPainter(self)
rect = self.geometry()
text_rect = QRect(0, 0, rect.width(), rect.height())
painter.translate(text_rect.bottomLeft())
painter.rotate(-90)
painter.drawText(QRect(QPoint(0, 0), QSize(rect.height(), rect.width())), Qt.AlignCenter, self.text())
painter.end()
def paintEvent(self, event):
painter = QPainter(self)
rect = self.geometry()
text_rect = QRect(0, 0, rect.width(), rect.height())
painter.translate(text_rect.bottomLeft())
painter.rotate(-90)
painter.drawText(
QRect(QPoint(0, 0), QSize(rect.height(), rect.width())),
Qt.AlignCenter, self.text())
painter.end()
def drawPatchQt(self, pos, turn, invert, patch_type, image, size,
foreColor, backColor, penwidth): # pylint: disable=unused-argument
"""
:param size: patch size
"""
path = self.PATH_SET[patch_type]
if not path:
# blank patch
invert = not invert
path = [(0., 0.), (1., 0.), (1., 1.), (0., 1.), (0., 0.)]
polygon = QPolygonF([QPointF(x * size, y * size) for x, y in path])
rot = turn % 4
rect = [
QPointF(0., 0.),
QPointF(size, 0.),
QPointF(size, size),
QPointF(0., size)
]
rotation = [0, 90, 180, 270]
nopen = QtGui.QPen(foreColor, Qt.NoPen)
foreBrush = QtGui.QBrush(foreColor, Qt.SolidPattern)
if penwidth > 0:
pen_color = QtGui.QColor(255, 255, 255)
pen = QtGui.QPen(pen_color, Qt.SolidPattern)
pen.setWidth(penwidth)
painter = QPainter()
painter.begin(image)
painter.setPen(nopen)
painter.translate(pos[0] * size + penwidth / 2,
pos[1] * size + penwidth / 2)
painter.translate(rect[rot])
painter.rotate(rotation[rot])
if invert:
# subtract the actual polygon from a rectangle to invert it
poly_rect = QPolygonF(rect)
polygon = poly_rect.subtracted(polygon)
painter.setBrush(foreBrush)
if penwidth > 0:
# draw the borders
painter.setPen(pen)
painter.drawPolygon(polygon, Qt.WindingFill)
# draw the fill
painter.setPen(nopen)
painter.drawPolygon(polygon, Qt.WindingFill)
painter.end()
return image
def draw_needle(self):
painter = QPainter(self)
# painter.setRenderHint(QtGui.QPainter.HighQualityAntialiasing)
painter.setRenderHint(QPainter.Antialiasing)
# Koordinatenursprung in die Mitte der Flaeche legen
painter.translate(self.width() / 2, self.height() / 2)
painter.setPen(Qt.NoPen)
painter.setBrush(self.NeedleColor)
painter.rotate(((self.value - self.value_offset - self.value_min) * self.scale_angle_size /
(self.value_max - self.value_min)) + 90 + self.scale_angle_start_value)
painter.drawConvexPolygon(self.value_needle[0])
def create_fine_scaled_marker(self):
# Description_dict = 0
my_painter = QPainter(self)
my_painter.setRenderHint(QPainter.Antialiasing)
# Koordinatenursprung in die Mitte der Flaeche legen
my_painter.translate(self.width() / 2, self.height() / 2)
my_painter.setPen(Qt.black)
my_painter.rotate(self.scale_angle_start_value - self.angle_offset)
steps_size = (float(self.scale_angle_size) / float(self.scala_main_count * self.scala_subdiv_count))
scale_line_outer_start = self.widget_diameter/2
scale_line_lenght = (self.widget_diameter / 2) - (self.widget_diameter / 25)
for i in range((self.scala_main_count * self.scala_subdiv_count)+1):
my_painter.drawLine(scale_line_lenght, 0, scale_line_outer_start, 0)
my_painter.rotate(steps_size)
def paintEvent(self, event):
"""Paint a nice primitive arrow."""
opt = QStyleOption()
opt.initFrom(self)
p = QPainter(self)
#painter.translate(20, 10)
p.rotate(-45)
if self._direction == QArrow.UP:
primitive = QStyle.PE_IndicatorArrowUp
elif self._direction == QArrow.DOWN:
primitive = QStyle.PE_IndicatorArrowDown
elif self._direction == QArrow.LEFT:
primitive = QStyle.PE_IndicatorArrowLeft
else:
primitive = QStyle.PE_IndicatorArrowRight
self.style().drawPrimitive(primitive, opt, p, self)
def paintEvent(self, event):
qp = QPainter()
qp.begin(self)
qp.translate(self.width()/2, self.height()/2);
for i in range(24):
qp.drawLine(88, 0, 96, 0);
qp.rotate(15.0);
qp.rotate(((self.count % 24)*15+270)%360)
qp.drawLine(50, 0, 80, 0)
if self.pressed:
qp.setBrush(QBrush(Qt.red))
qp.drawEllipse(-50, -50, 100, 100)
qp.end()
def create_minor_ticks(self):
# Description_dict = 0
painter = QPainter(self)
painter.setRenderHint(QPainter.Antialiasing)
# Koordinatenursprung in die Mitte der Flaeche legen
painter.translate(*self.center_p())
painter.setPen(Qt.black)
painter.rotate(self.scale_angle_start_value - self.angle_offset)
steps_size = (float(self.scale_angle_size) /
float(self.scala_main_count * self.scala_subdiv_count))
scale_line_outer_start = self.widget_diameter / 2
scale_line_lenght = (self.widget_diameter /
2) - (self.widget_diameter / 40)
for i in range((self.scala_main_count * self.scala_subdiv_count) + 1):
painter.drawLine(scale_line_lenght, 0, scale_line_outer_start, 0)
painter.rotate(steps_size)
def paintEvent(self, e):
time = QTime.currentTime()
qp = QPainter()
qp.begin(self)
#qp.setRenderHint(QPainter.Antialiasing) # 开启这个抗锯齿,会很占cpu的!
qp.translate(self.width() / 2, self.height() / 2)
qp.scale(self.side / 200.0, self.side / 200.0)
qp.setPen(QtCore.Qt.NoPen)
qp.setBrush(self.hourColor)
qp.save()
qp.rotate(30.0 * ((time.hour() + time.minute() / 60.0)))
qp.drawConvexPolygon(self.hourHand)
qp.restore()
qp.setPen(self.hourColor)
for i in range(12):
qp.drawLine(88, 0, 96, 0)
qp.rotate(30.0)
qp.setPen(QtCore.Qt.NoPen)
qp.setBrush(self.minuteColor)
qp.save()
qp.rotate(6.0 * ((time.minute() +
(time.second() + time.msec() / 1000.0) / 60.0)))
qp.drawConvexPolygon(self.minuteHand)
qp.restore()
qp.setPen(self.minuteColor)
for i in range(60):
if (i % 5) is not 0:
qp.drawLine(92, 0, 96, 0)
qp.rotate(6.0)
qp.setPen(QtCore.Qt.NoPen)
qp.setBrush(self.secondColor)
qp.save()
qp.rotate(6.0 * (time.second() + time.msec() / 1000.0))
qp.drawConvexPolygon(self.secondHand)
qp.restore()
qp.end()
def paintEvent(self, e):
time = QTime.currentTime()
qp = QPainter()
qp.begin(self)
#qp.setRenderHint(QPainter.Antialiasing) # 开启这个抗锯齿,会很占cpu的!
qp.translate(self.width() / 2, self.height() / 2)
qp.scale(self.side / 200.0, self.side / 200.0)
qp.setPen(QtCore.Qt.NoPen)
qp.setBrush(self.hourColor)
qp.save()
qp.rotate(30.0 * ((time.hour() + time.minute()/ 60.0)))
qp.drawConvexPolygon(self.hourHand)
qp.restore()
qp.setPen(self.hourColor)
for i in range(12):
qp.drawLine(88, 0, 96, 0)
qp.rotate(30.0)
qp.setPen(QtCore.Qt.NoPen)
qp.setBrush(self.minuteColor)
qp.save()
qp.rotate(6.0 * ((time.minute() + (time.second()+time.msec()/1000.0) / 60.0)))
qp.drawConvexPolygon(self.minuteHand)
qp.restore()
qp.setPen(self.minuteColor)
for i in range(60):
if (i % 5) is not 0:
qp.drawLine(92, 0, 96, 0)
qp.rotate(6.0)
qp.setPen(QtCore.Qt.NoPen)
qp.setBrush(self.secondColor)
qp.save()
qp.rotate(6.0*(time.second()+time.msec()/1000.0))
qp.drawConvexPolygon(self.secondHand)
qp.restore()
qp.end()
def draw_big_scaled_markter(self):
my_painter = QPainter(self)
my_painter.setRenderHint(QPainter.Antialiasing)
# Koordinatenursprung in die Mitte der Flaeche legen
my_painter.translate(self.width() / 2, self.height() / 2)
# my_painter.setPen(Qt.NoPen)
self.pen = QPen(QColor(0, 0, 0, 255))
self.pen.setWidth(2)
# # if outline_pen_with > 0:
my_painter.setPen(self.pen)
my_painter.rotate(self.scale_angle_start_value - self.angle_offset)
steps_size = (float(self.scale_angle_size) / float(self.scala_main_count))
scale_line_outer_start = self.widget_diameter/2
scale_line_lenght = (self.widget_diameter / 2) - (self.widget_diameter / 20)
# print(stepszize)
for i in range(self.scala_main_count+1):
my_painter.drawLine(scale_line_lenght, 0, scale_line_outer_start, 0)
my_painter.rotate(steps_size)
def draw_needle(self):
painter = QPainter(self)
# painter.setRenderHint(QtGui.QPainter.HighQualityAntialiasing)
painter.setRenderHint(QPainter.Antialiasing)
# Koordinatenursprung in die Mitte der Flaeche legen
painter.translate(self.width() / 2, self.height() / 2)
painter.setPen(Qt.NoPen)
painter.setBrush(self.NeedleColor)
# painter.rotate(((self.value - self.value_offset - self.value_min) * self.scale_angle_size /
# (self.value_max - self.value_min)) + 90 + self.scale_angle_start_value)
frac, whole = math.modf(self.value)
if frac >= 0:
frac = 1-frac
rotFraction = ((self.value - self.value_offset - self.value_min)/(self.value_max - self.value_min))
else:
frac = 1+frac
rotFraction = (((whole-frac) - self.value_offset - self.value_min)/(self.value_max - self.value_min))
painter.rotate((1-rotFraction) * self.scale_angle_size + 90 + self.scale_angle_start_value)
painter.drawConvexPolygon(self.value_needle[0])
def paintEvent(self, event):
"""Paint semi-transparent background,animated pattern,background text"""
if not A11Y:
p = QPainter(self)
p.setRenderHint(QPainter.Antialiasing)
p.setRenderHint(QPainter.TextAntialiasing)
p.setRenderHint(QPainter.HighQualityAntialiasing)
p.fillRect(event.rect(), Qt.transparent)
# animated random dots background pattern
for i in range(4096):
x = randint(25, self.size().width() - 25)
y = randint(25, self.size().height() - 25)
# p.setPen(QPen(QColor(randint(9, 255), 255, 255), 1))
p.drawPoint(x, y)
p.setPen(QPen(Qt.white, 1))
p.rotate(40)
p.setFont(QFont('Ubuntu', 250))
p.drawText(200, 99, "Nuitka")
p.rotate(-40)
p.setPen(Qt.NoPen)
p.setBrush(QColor(0, 0, 0))
p.setOpacity(0.8)
p.drawRoundedRect(self.rect(), 9, 9)
p.end()
def paintEvent(self, event):
if self._isRunning:
anglestep = 360. / self._steps
fillsteps = self._fillsteps
factor = min(self.width(), self.height()) / 16.
bw = self._bw
p = QPainter(self)
p.setRenderHint(QPainter.Antialiasing, True)
p.scale(factor, factor)
p.setPen(Qt.NoPen)
for i in range(self._steps):
x1, y1 = self._coords[i]
c = fillsteps[self._steps - 1 - i]
a = anglestep * i
p.setBrush(QBrush(QColor.fromRgbF(bw, bw, bw, c)))
p.save()
p.translate(x1 - 2, y1 - 1)
p.translate(2, 1)
p.rotate(a)
p.translate(-2, -1)
p.drawPath(self._path)
p.restore()
def paintEvent(self, event):
if self._isRunning:
anglestep = 360. / self._steps
fillsteps = self._fillsteps
factor = min(self.width(), self.height()) / 16.
bw = self._bw
p = QPainter(self)
p.setRenderHint(QPainter.Antialiasing, True)
p.scale(factor, factor)
p.setPen(Qt.NoPen)
for i in range(self._steps):
x1, y1 = self._coords[i]
c = fillsteps[self._steps - 1 - i]
a = anglestep * i
p.setBrush(QBrush(QColor.fromRgbF(bw, bw, bw, c)))
p.save()
p.translate(x1 - 2, y1 - 1)
p.translate(2, 1)
p.rotate(a)
p.translate(-2, -1)
p.drawPath(self._path)
p.restore()
class Meter(QtGui.QWidget):
"""
a PyQt instance of QtMeter from Qt example code
"""
def __init__(self, parent=None):
QtGui.QWidget.__init__(self, parent)
self.value = 0
self.minValue = 0
self.maxValue = 100
self.logo = ""
self.scaleMajor = 10
self.scaleMijor = 10
self.startAngle = 60
self.endAngle = 60
self.crownColor = Qt.blue
self.foreground = Qt.green
self.background = Qt.black
self.timer = QTimer()
self.timer.timeout.connect(self.update)
self.timer.start(200)
self.resize(200, 200)
def updateValue(self):
pass
def paintEvent(self, QPaintEvent):
self.updateValue()
self.side = min(self.width(), self.height())
self.painter = QPainter()
self.painter.begin(self)
#self.painter.setRenderHint(QPainter.Antialiasing)
self.painter.translate(self.width() / 2, self.height() / 2)
self.painter.scale(self.side / 200.0, self.side / 200.0)
self.painter.setPen(Qt.NoPen)
self.drawCrown()
self.drawBackgroud()
self.drawLogo()
self.drawScale()
self.drawScaleNum()
self.drawNumbericValue()
self.drawPointer()
self.painter.end()
def setValue(self, updatefun):
self.value = updatefun()
def setLogo(self, logo):
self.logo = logo
def drawCrown(self):
self.painter.save()
self.painter.setPen(QtGui.QPen(self.crownColor, 3))
self.painter.drawEllipse(-92, -92, 184, 184)
self.painter.restore()
def drawBackgroud(self):
self.painter.save()
self.painter.setBrush(self.background)
self.painter.drawEllipse(-92, -92, 184, 184)
self.painter.restore()
def drawScale(self):
self.painter.save()
self.painter.rotate(self.startAngle)
self.painter.setPen(self.foreground)
steps = self.scaleMajor * self.scaleMijor
angleStep = (360.0 - self.startAngle - self.endAngle) / steps
pen = QtGui.QPen(self.painter.pen())
for i in xrange(steps + 1):
if i % self.scaleMajor == 0:
pen.setWidth(1)
self.painter.setPen(pen)
self.painter.drawLine(0, 62, 0, 72)
else:
pen.setWidth(0)
self.painter.setPen(pen)
self.painter.drawLine(0, 62, 0, 65)
self.painter.rotate(angleStep)
self.painter.restore()
def drawScaleNum(self):
self.painter.save()
self.painter.setPen(self.foreground)
startRad = (360 - self.startAngle - 90) * (3.14 / 180)
deltaRad = (360 - self.startAngle -
self.endAngle) * (3.14 / 180) / self.scaleMajor
fm = QtGui.QFontMetricsF(self.font())
for i in xrange(self.scaleMajor + 1):
sina = sin(startRad - i * deltaRad)
cosa = cos(startRad - i * deltaRad)
tmpVal = 1.0 * i * ((self.maxValue - self.minValue) /
self.scaleMajor) + self.minValue
numstr = QString("%1").arg(tmpVal)
w = fm.size(Qt.TextSingleLine, numstr).width()
h = fm.size(Qt.TextSingleLine, numstr).height()
x = 82 * cosa - w / 2
y = -82 * sina + h / 4
self.painter.drawText(x, y, numstr)
self.painter.restore()
def drawLogo(self):
self.painter.save()
self.painter.setPen(self.foreground)
self.painter.setBrush(self.foreground)
logostr = QString(self.logo)
fm = QtGui.QFontMetricsF(self.font())
w = fm.size(Qt.TextSingleLine, logostr).width()
self.painter.drawText(-w / 2, -30, logostr)
self.painter.restore()
def drawNumbericValue(self):
self.painter.save()
color = QtGui.QColor(150, 150, 200)
pen = self.painter.pen()
pen.setWidth(3)
self.painter.setPen(pen)
self.painter.setPen(color)
self.painter.drawRect(-30, 30, 60, 14)
cpustr = QString("%1").arg(self.value)
fm = QtGui.QFontMetricsF(self.font())
w = fm.size(Qt.TextSingleLine, cpustr).width()
self.painter.setPen(self.foreground)
self.painter.drawText(-w / 2, 42, cpustr)
self.painter.restore()
def drawPointer(self):
self.painter.save()
self.pointerHand = QPolygon([-2, 0, 2, 0, 0, 60])
self.pointerColor = QColor(127, 0, 127)
self.painter.setBrush(self.pointerColor)
self.painter.rotate(self.startAngle)
degRotate = (360.0 - self.startAngle - self.endAngle) / (
self.maxValue - self.minValue) * (self.value - self.minValue)
self.painter.rotate(degRotate)
self.painter.drawConvexPolygon(self.pointerHand)
self.painter.restore()
def paintEvent(self, event):
# Initialize QPainter properties
painter = QPainter()
painter.begin(self)
painter.setRenderHint(QPainter.Antialiasing)
if self.height() <= self.width() / self.ref_aspect_ratio:
v_scale = self.height()
h_scale = v_scale * self.ref_aspect_ratio
else:
h_scale = self.width()
v_scale = h_scale / self.ref_aspect_ratio
# Scale all objects proportionate to window size
painter.scale(h_scale / self.width_ref, v_scale / self.height_ref)
painter.setClipPath(self.dial) # Don't allow objects or text to extend outside of main dial shape
painter.save()
# First draw main gauge background
pen = QPen(painter.pen())
pen.setWidth(1)
pen.setColor(Qt.black)
painter.setPen(pen)
painter.setBrush(QColor(100, 100, 100, 255)) # self.dial_bg)
painter.drawPath(self.dial)
# Add Minor and Major Alarm limit bars
pen.setWidth(16)
pen.setCapStyle(Qt.FlatCap)
pen.setJoinStyle(Qt.BevelJoin)
pen.setColor(Qt.yellow)
painter.setPen(pen)
painter.setBrush(Qt.NoBrush)
painter.drawPath(self.low_arc)
painter.drawPath(self.high_arc)
pen.setColor(Qt.red)
painter.setPen(pen)
painter.drawPath(self.lolo_arc)
painter.drawPath(self.hihi_arc)
painter.restore()
# Display PV current value
painter.save()
font = QFont()
font.setPixelSize(45)
painter.setFont(font)
sevr = self.channel.sevr.lower()
if sevr == 'major':
color = Qt.red
elif sevr == 'minor':
color = Qt.yellow
elif sevr == 'invalid':
color = Qt.magenta
else:
color = Qt.green
pen.setColor(color)
painter.setPen(pen)
font_metric = QFontMetrics(font)
painter.translate(self.dial_width / 2, self.dial_height / 2)
label = self.format_label(self.channel_value)
painter.drawText(QPointF(0.0 - font_metric.width(label) / 2.0, font_metric.height() / 2.0),
label)
# Display PV name
painter.setFont(self.pv_label_font)
pen.setColor(Qt.black) # Qt.darkCyan)
pen.setWidth(1)
painter.setPen(pen)
# brush = QBrush(Qt.darkCyan)
# painter.setBrush(brush)
font_metric = QFontMetrics(self.pv_label_font)
pv_label = self.channel.egu # self.channel.name + ' (' + self.channel.egu + ')'
painter.drawText(QPointF(0.0 - font_metric.width(pv_label) / 2.0,
(self.dial_height / 2.0) + (font_metric.height() * 1.5)),
pv_label)
# painter.drawPath(self.pv_label_path)
painter.restore()
# Next add division markers
painter.save()
painter.translate(self.dial_width / 2, self.dial_height * 0.98)
pen.setColor(Qt.black) # Qt.cyan)
pen.setWidth(2)
painter.setPen(pen)
for i in range(0, 31):
if (i % 5) != 0:
painter.drawLine(-self.dial_width / 2.1, 0.0, -self.dial_width / 2.2, 0.0)
else:
painter.drawLine(-self.dial_width / 2.1, 0.0, -self.dial_width / 2.3, 0.0)
painter.rotate(6.0)
painter.restore()
# Layout division text labels
painter.save()
painter.translate(self.dial_width / 2, self.dial_height * 0.98)
pen.setColor(Qt.black) # Qt.cyan)
painter.setPen(pen)
font = QFont()
font.setPixelSize(18)
painter.setFont(font)
font_metric = QFontMetrics(font)
labels = linspace(self.lim_low, self.lim_hi, 7)
painter.rotate(-90)
for i in range(0, 7):
label = self.format_label(labels[i])
painter.drawText(QPointF(0.0 - font_metric.width(label) / 2.0, -self.dial_height * 0.75), label)
painter.rotate(30)
painter.restore()
# Draw needle at appropriate angle for data
painter.save()
painter.translate(self.dial_width / 2, self.dial_height * 0.98)
painter.rotate(-180 * (1.0 - self.percentage))
pen.setColor(QColor(self.needle_color).darker(200))
pen.setWidth(1)
painter.setPen(pen)
painter.setBrush(self.needle_color)
painter.drawPolygon(self.needle)
painter.restore()
# if self.percentage <= 0.5:
# shadow = max(490 * self.percentage, 127)
# needle_left_color = QColor(0, shadow, shadow) # Qt.darkCyan # QColor(80,80,80,255)
# needle_right_color = Qt.cyan # QColor(230,230,230,255)
# else:
# shadow = max(125 / self.percentage, 127)
# needle_left_color = Qt.cyan # QColor(230,230,230,255)
# needle_right_color = QColor(0, shadow, shadow) # Qt.darkCyan # QColor(80,80,80,255)
#
# # Draw Highlight side of needle
# pen.setWidth(1)
# pen.setColor(Qt.gray) # needle_left_color)
# painter.setPen(pen)
# painter.setBrush(Qt.gray) # needle_left_color)
# painter.drawPolygon(self.needle_left)
#
# # Draw shadow side of needle
# pen.setColor(Qt.gray) # needle_right_color)
# painter.setPen(pen)
# painter.setBrush(Qt.gray) # needle_right_color)
# painter.drawPolygon(self.needle_right)
# painter.restore()
# Draw needle axel pin
painter.save()
pen.setWidth(1)
pen.setColor(Qt.black)
painter.setPen(pen)
painter.setBrush(QColor(50, 50, 50, 255)) # self.pin_bg)
painter.translate(self.dial_width / 2, self.dial_height * 0.98)
painter.drawEllipse(self.pin_rect)
painter.restore()
# Draw glass reflection and shadow effects
# painter.save()
# painter.translate(self.dial_width / 2.0, self.dial_height / 2.0)
# painter.setPen(Qt.NoPen)
# painter.setBrush(QColor(0, 0, 0, 20))
# painter.drawEllipse(self.shadow_rect)
# painter.setBrush(self.gloss_gradient)
# painter.drawEllipse(self.gloss_rect)
# painter.restore()
painter.end()
class QtRenderer(Renderer):
def __init__(self, pd):
"""Creates a new renderer based on a QPaintDevice pd
"""
self._defpose = Pose() # The pose in the bottom-left corner
self._zoom = 1 # The zooming factor
self._zoom_c = False # Whether the scaling is done from center
Renderer.__init__(self, (pd.width(), pd.height()), pd)
def set_canvas(self, canvas):
"""Tell the renderer to draw on canvas
The type of canvas is implementation-dependent
"""
self._paintdevice = canvas
self._painter = QPainter(canvas)
self._painter.setRenderHint(QPainter.Antialiasing)
# invert the y axis
self._painter.scale(1,-1)
self._painter.translate(0,-canvas.height())
self.set_pen(None)
# push the default state
self._painter.save()
self._painter.save()
def set_zoom(self, zoom_level):
self._zoom = float(zoom_level)
self.__update_default_state()
def __update_default_state(self):
self._painter.restore() # Reset state
self._painter.restore() # Set zoom to 1
self._painter.save() # Re-save the zoom-1
if self._zoom_c:
self._painter.translate(self.size[0]/2,self.size[1]/2)
self._painter.scale(self._zoom,self._zoom)
self._painter.rotate(degrees(-self._defpose.theta))
self._painter.translate(-self._defpose.x, -self._defpose.y)
self._painter.save() # Save the zoomed state
self.clear_screen()
def __set_scr_pose(self,pose):
self._defpose = pose
self.__update_default_state()
self.clear_screen()
def set_screen_pose(self, pose):
self._zoom_c = False
self.__set_scr_pose(pose)
def set_screen_center_pose(self, pose):
self._zoom_c = True
self.__set_scr_pose(pose)
def clear_screen(self):
self._painter.save()
self._painter.resetTransform()
self.set_pen(0xFFFFFF)
self.set_brush(0xFFFFFF)
self.draw_rectangle(0,0,self.size[0],self.size[1])
self._painter.restore()
def __delete__(self):
self._painter.restore()
self._painter.restore()
def reset_pose(self):
"""Resets the renderer to world coordinates
"""
self._painter.restore()
self._painter.save()
def add_pose(self,pose):
"""Add a pose transformation to the current transformation
"""
self._painter.translate(pose.x,pose.y)
self._painter.rotate(degrees(pose.theta))
@staticmethod
def __qcolor(color):
"""Returns qcolor for a given ARGB color
"""
c = QColor(color)
if color > 0xFFFFFF:
c.setAlpha((color >> 24) & 0xFF)
return c
def set_pen(self,color):
"""Sets the line color.
Color is interpreted as 0xAARRGGBB.
"""
if color is None:
self._painter.setPen(Qt.NoPen)
else:
self._painter.setPen(self.__qcolor(color))
def set_brush(self,color):
"""Sets the fill color.
Color is interpreted as 0xAARRGGBB.
"""
if color is None:
self._painter.setBrush(Qt.NoBrush)
else:
self._painter.setBrush(self.__qcolor(color))
def draw_polygon(self,points):
"""Draws a polygon.
Expects a list of points as a list of tuples or as a numpy array.
"""
self._painter.drawPolygon(QPolygonF([QPointF(*point[:2]) for point in points]))
def draw_ellipse(self, x, y, w, h):
"""Draws an ellipse.
"""
self._painter.drawEllipse(x,y,w,h)
def draw_rectangle(self, x, y, w, h):
"""Draws a rectangle.
"""
self._painter.drawRect(x,y,w,h)
def draw_text(self, text, x, y, bgcolor = 0):
"""Draws a text string at the defined position.
"""
pass
def draw_line(self, x1, y1, x2, y2):
"""Draws a line using the current pen from (x1,y1) to (x2,y2)
"""
pass
class QtRenderer(Renderer):
"""An implementation of :class:`~renderer.Renderer` for PyQt4.
This renderer will draw on any `QPaintDevice`
"""
def __init__(self, paint_device):
"""Creates a new renderer based on a QPaintDevice pd"""
self._grid_pen = QPen(QColor(0x808080))
self._grid_pen.setStyle(Qt.DashLine)
self._painter = None
Renderer.__init__(self, paint_device)
def set_canvas(self, canvas):
"""Tell the renderer to draw on canvas
The type of canvas is implementation-dependent"""
if self._painter is not None:
self._painter.restore()
self._painter.restore()
self._painter.end()
self._paintdevice = canvas
self._painter = QPainter(canvas)
self._painter.setRenderHint(QPainter.Antialiasing)
# invert the y axis
self._painter.scale(1,-1)
self._painter.translate(0,-canvas.height())
Renderer.set_canvas(self,canvas)
def _get_canvas_size(self,pd):
"""Get the canvas size tuple (width,height)"""
return (pd.width(), pd.height())
def push_state(self):
"""Store the current state on the stack.
Current state includes default pose, pen and brush"""
### FIXME store things
self._painter.save()
def pop_state(self):
"""Restore the last saved state from the stack
The state includes default pose, pen and brush"""
### FIXME store things
self._painter.restore()
def _calculate_bounds(self):
transform = self._painter.worldTransform().inverted()[0]
xs,ys = zip(
transform.map(0.0,0.0),
transform.map(0.0,float(self.size[1])),
transform.map(float(self.size[0]),float(self.size[1])),
transform.map(float(self.size[0]),0.0)
)
self._bounds = (min(xs), min(ys), max(xs), max(ys))
def _draw_grid(self):
self.reset_pose()
self._painter.setPen(self._grid_pen)
xmin, ymin, xmax, ymax = self._bounds
# Determine min/max x & y line indices:
x_ticks = (int(xmin//self._grid_spacing), int(xmax//self._grid_spacing + 1))
y_ticks = (int(ymin//self._grid_spacing), int(ymax//self._grid_spacing + 1))
self._painter.drawLines(
[QLineF(xmin, i * self._grid_spacing,
xmax, i * self._grid_spacing)
for i in range(*y_ticks)])
self._painter.drawLines(
[QLineF(i * self._grid_spacing, ymin,
i * self._grid_spacing, ymax)
for i in range(*x_ticks)])
def scale(self, factor):
"""Scale drawing operations by factor
To be implemented in subclasses."""
self._painter.scale(factor,factor)
def rotate(self, angle):
"""Rotate canvas by angle (in radians)
To be implemented in subclasses."""
self._painter.rotate(degrees(angle))
def translate(self, dx, dy):
"""Translate canvas by dx, dy
To be implemented in subclasses."""
self._painter.translate(dx,dy)
def clear_screen(self):
"""Erases the current screen with a white brush"""
self._painter.save()
self._painter.resetTransform()
self.set_pen(0xFFFFFF)
self.set_brush(0xFFFFFF)
self.draw_rectangle(0,0,self.size[0],self.size[1])
self._painter.restore()
Renderer.clear_screen(self)
@staticmethod
def __qcolor(color):
"""Returns qcolor for a given ARGB color"""
c = QColor(color)
if color > 0xFFFFFF:
c.setAlpha((color >> 24) & 0xFF)
return c
def set_pen(self,color=0, thickness=0):
"""Sets the line color and thickness.
Color is interpreted as 0xAARRGGBB."""
if color is None:
self._painter.setPen(Qt.NoPen)
else:
self._painter.setPen(QPen(self.__qcolor(color),thickness))
def set_brush(self,color):
"""Sets the fill color.
Color is interpreted as 0xAARRGGBB."""
if color is None:
self._painter.setBrush(Qt.NoBrush)
else:
self._painter.setBrush(self.__qcolor(color))
def draw_polygon(self,points):
"""Draws a polygon.
Expects a list of points as a list of tuples or as a numpy array."""
self._painter.drawPolygon(QPolygonF([QPointF(*point[:2]) for point in points]))
def draw_ellipse(self, cx, cy, ra, rb = None):
"""Draws an ellipse."""
if rb is None:
rb = ra
self._painter.drawEllipse(QRectF(cx-ra,cy-ra,2*ra,2*rb))
def draw_rectangle(self, x, y, w, h):
"""Draws a rectangle."""
self._painter.drawRect(QRectF(x,y,w,h))
def draw_text(self, text, x, y, bgcolor = 0):
"""Draws a text string at the defined position."""
pass
def draw_line(self, x1, y1, x2, y2):
"""Draws a line using the current pen from (x1,y1) to (x2,y2)"""
self._painter.drawLine(QLineF(x1,y1,x2,y2))
def paintEvent(self, event):
painter = QPainter(self)
painter.setRenderHint(QPainter.Antialiasing)
width = self.width()
height = self.height()
if self.dynamic_resize:
knob_radius = self.dynamic_knob_radius
else:
knob_radius = self.knob_radius
# ensure that the center point is in the middle of a pixel to ensure
# that exact vertial and horizantal ticks are drawn exactly 1px wide
x = math.floor(width / 2.0) + 0.5
y = math.floor(height / 2.0) + 0.5
if DEBUG:
painter.fillRect(0, 0, width, height, Qt.yellow)
painter.translate(x, y)
if self.knob_style == KnobWidget.STYLE_NEEDLE:
r = min(x, y) - 1
painter.setPen(Qt.white)
painter.setBrush(Qt.white)
painter.drawEllipse(QPoint(0, 0), r, r)
angle = self.value_factor * self.total_angle - (self.total_angle / 2.0)
# draw base knob or needle spike
if self.knob_style == KnobWidget.STYLE_ROUND:
painter.setPen(self.border_color)
if self.pressed:
gradient = QRadialGradient(0, 0, knob_radius)
gradient.setColorAt(0, self.base_color_pressed)
gradient.setColorAt(0.85, self.base_color)
gradient.setColorAt(1, self.base_color)
painter.setBrush(gradient)
else:
painter.setBrush(self.base_color)
painter.drawEllipse(QPoint(0, 0), knob_radius, knob_radius)
elif self.knob_style == KnobWidget.STYLE_NEEDLE:
painter.save()
painter.rotate(angle)
painter.setPen(self.needle_color)
painter.setBrush(self.needle_color)
needle = QPolygonF()
needle.append(QPointF(self.needle_base_radius * 0.6, 0))
needle.append(QPointF(0, -knob_radius))
needle.append(QPointF(-self.needle_base_radius * 0.6, 0))
painter.drawPolygon(needle)
painter.restore()
# draw knob mark or needle base
if self.knob_style == KnobWidget.STYLE_ROUND:
painter.save()
painter.rotate(angle)
painter.setPen(QPen(self.mark_color, 2))
painter.drawLine(0, -knob_radius * 0.4, 0, -knob_radius * 0.8)
painter.restore()
elif self.knob_style == KnobWidget.STYLE_NEEDLE:
painter.setPen(self.border_color)
painter.setBrush(self.base_color)
painter.drawEllipse(QPoint(0, 0), self.needle_base_radius, self.needle_base_radius)
if self.scale_visible:
painter.setPen(Qt.black)
# draw scale arc
if self.scale_arc_visible:
painter.drawArc(-knob_radius - self.knob_to_scale,
-knob_radius - self.knob_to_scale,
knob_radius * 2 + self.knob_to_scale * 2,
knob_radius * 2 + self.knob_to_scale * 2,
(90 + self.total_angle / 2) * 16, -self.total_angle * 16)
# draw scale ticks
def value_to_angle(value):
return (float(value - self.minimum_value) / self.value_range) * self.total_angle - (self.total_angle / 2.0)
value = self.minimum_value
while value <= self.maximum_value:
angle = value_to_angle(value)
painter.save()
painter.rotate(value_to_angle(value))
painter.drawLine(0, -knob_radius - self.knob_to_scale,
0, -knob_radius - self.knob_to_scale - self.tick_size_large)
if self.scale_text_visible:
p = painter.worldTransform().map(QPoint(0, -knob_radius - \
self.knob_to_scale - \
self.tick_size_large - \
self.tick_to_text - \
self.text_radius))
painter.restore()
if self.scale_text_visible:
if DEBUG:
painter.save()
painter.setPen(QColor(255, 0, 0, 50))
painter.setBrush(QColor(255, 0, 0, 50))
painter.drawEllipse(QPoint(p.x() - x, p.y() - y),
self.text_radius, self.text_radius)
painter.restore()
painter.drawText(p.x() - x - 30, p.y() - y - 30, 60, 60,
Qt.TextDontClip | Qt.AlignHCenter | Qt.AlignVCenter,
str(value))
for i in range(1, self.scale_step_divisions):
sub_value = value + (float(self.scale_step_size) * i) / self.scale_step_divisions
if sub_value > self.maximum_value:
break
painter.save()
painter.rotate(value_to_angle(sub_value))
painter.drawLine(0, -knob_radius - self.knob_to_scale,
0, -knob_radius - self.knob_to_scale - self.tick_size_small)
painter.restore()
value += self.scale_step_size
if self.title_text != None:
painter.drawText(-knob_radius, knob_radius - 30,
knob_radius * 2, 60,
Qt.TextDontClip | Qt.AlignHCenter | Qt.AlignVCenter,
self.title_text)
class Meter(QtGui.QWidget):
"""
a PyQt instance of QtMeter from Qt example code
"""
def __init__(self,parent=None):
QtGui.QWidget.__init__(self,parent)
self.value = 0
self.minValue = 0
self.maxValue = 100
self.logo = ""
self.scaleMajor = 10
self.scaleMijor = 10
self.startAngle = 60
self.endAngle = 60
self.crownColor = Qt.blue
self.foreground = Qt.green
self.background = Qt.black
self.timer = QTimer()
self.timer.timeout.connect(self.update)
self.timer.start(200)
self.resize(200,200)
def updateValue(self):
pass
def paintEvent(self,QPaintEvent):
self.updateValue()
self.side = min(self.width(),self.height())
self.painter = QPainter()
self.painter.begin(self)
#self.painter.setRenderHint(QPainter.Antialiasing)
self.painter.translate(self.width()/2,self.height()/2)
self.painter.scale(self.side / 200.0, self.side / 200.0)
self.painter.setPen(Qt.NoPen)
self.drawCrown()
self.drawBackgroud()
self.drawLogo()
self.drawScale()
self.drawScaleNum()
self.drawNumbericValue()
self.drawPointer()
self.painter.end()
def setValue(self,updatefun):
self.value = updatefun()
def setLogo(self,logo):
self.logo = logo
def drawCrown(self):
self.painter.save()
self.painter.setPen(QtGui.QPen(self.crownColor, 3))
self.painter.drawEllipse(-92, -92, 184, 184)
self.painter.restore()
def drawBackgroud(self):
self.painter.save()
self.painter.setBrush(self.background)
self.painter.drawEllipse(-92, -92, 184, 184)
self.painter.restore()
def drawScale(self):
self.painter.save()
self.painter.rotate(self.startAngle)
self.painter.setPen(self.foreground)
steps = self.scaleMajor * self.scaleMijor
angleStep = (360.0 - self.startAngle - self.endAngle) /steps
pen = QtGui.QPen(self.painter.pen())
for i in xrange(steps+1):
if i % self.scaleMajor == 0:
pen.setWidth(1)
self.painter.setPen(pen)
self.painter.drawLine(0, 62, 0, 72)
else:
pen.setWidth(0)
self.painter.setPen(pen)
self.painter.drawLine(0, 62, 0, 65)
self.painter.rotate(angleStep)
self.painter.restore()
def drawScaleNum(self):
self.painter.save()
self.painter.setPen(self.foreground)
startRad = (360 - self.startAngle - 90) * (3.14 / 180)
deltaRad = (360 - self.startAngle - self.endAngle) * (3.14 / 180) / self.scaleMajor
fm = QtGui.QFontMetricsF(self.font())
for i in xrange(self.scaleMajor+1):
sina = sin(startRad - i * deltaRad)
cosa = cos(startRad - i * deltaRad)
tmpVal = 1.0 * i *((self.maxValue - self.minValue) / self.scaleMajor) + self.minValue
numstr = QString( "%1" ).arg(tmpVal)
w = fm.size(Qt.TextSingleLine,numstr).width()
h = fm.size(Qt.TextSingleLine,numstr).height()
x = 82 * cosa - w / 2
y = -82 * sina + h / 4
self.painter.drawText(x, y, numstr)
self.painter.restore()
def drawLogo(self):
self.painter.save()
self.painter.setPen(self.foreground)
self.painter.setBrush(self.foreground)
logostr = QString(self.logo)
fm = QtGui.QFontMetricsF(self.font())
w = fm.size(Qt.TextSingleLine,logostr).width()
self.painter.drawText(-w / 2, -30, logostr)
self.painter.restore()
def drawNumbericValue(self):
self.painter.save()
color = QtGui.QColor(150, 150, 200)
pen = self.painter.pen()
pen.setWidth(3)
self.painter.setPen(pen)
self.painter.setPen(color)
self.painter.drawRect(-30, 30, 60, 14)
cpustr = QString("%1").arg(self.value)
fm = QtGui.QFontMetricsF(self.font())
w = fm.size(Qt.TextSingleLine,cpustr).width()
self.painter.setPen(self.foreground)
self.painter.drawText(-w / 2, 42, cpustr)
self.painter.restore()
def drawPointer(self):
self.painter.save()
self.pointerHand=QPolygon([-2,0, 2,0, 0,60])
self.pointerColor = QColor(127 , 0, 127)
self.painter.setBrush(self.pointerColor)
self.painter.rotate(self.startAngle)
degRotate = (360.0 - self.startAngle - self.endAngle)/(self.maxValue - self.minValue)*(self.value - self.minValue)
self.painter.rotate(degRotate)
self.painter.drawConvexPolygon(self.pointerHand)
self.painter.restore()
class QtRenderer(Renderer):
"""An implementation of :class:`~renderer.Renderer` for PyQt4.
This renderer will draw on any `QPaintDevice`
"""
def __init__(self, paint_device):
"""Creates a new renderer based on a QPaintDevice pd"""
self._grid_pen = QPen(QColor(0x808080))
self._grid_pen.setStyle(Qt.DashLine)
self._painter = None
Renderer.__init__(self, paint_device)
def set_canvas(self, canvas):
"""Tell the renderer to draw on canvas
The type of canvas is implementation-dependent"""
if self._painter is not None:
self._painter.restore()
self._painter.restore()
self._painter.end()
self._paintdevice = canvas
self._painter = QPainter(canvas)
self._painter.setRenderHint(QPainter.Antialiasing)
# invert the y axis
self._painter.scale(1, -1)
self._painter.translate(0, -canvas.height())
Renderer.set_canvas(self, canvas)
def _get_canvas_size(self, pd):
"""Get the canvas size tuple (width,height)"""
return (pd.width(), pd.height())
def push_state(self):
"""Store the current state on the stack.
Current state includes default pose, pen and brush"""
### FIXME store things
self._painter.save()
def pop_state(self):
"""Restore the last saved state from the stack
The state includes default pose, pen and brush"""
### FIXME store things
self._painter.restore()
def _calculate_bounds(self):
transform = self._painter.worldTransform().inverted()[0]
xs, ys = zip(transform.map(0.0, 0.0),
transform.map(0.0, float(self.size[1])),
transform.map(float(self.size[0]), float(self.size[1])),
transform.map(float(self.size[0]), 0.0))
self._bounds = (min(xs), min(ys), max(xs), max(ys))
def _draw_grid(self):
self.reset_pose()
self._painter.setPen(self._grid_pen)
xmin, ymin, xmax, ymax = self._bounds
# Determine min/max x & y line indices:
x_ticks = (int(xmin // self._grid_spacing),
int(xmax // self._grid_spacing + 1))
y_ticks = (int(ymin // self._grid_spacing),
int(ymax // self._grid_spacing + 1))
self._painter.drawLines([
QLineF(xmin, i * self._grid_spacing, xmax, i * self._grid_spacing)
for i in range(*y_ticks)
])
self._painter.drawLines([
QLineF(i * self._grid_spacing, ymin, i * self._grid_spacing, ymax)
for i in range(*x_ticks)
])
def scale(self, factor):
"""Scale drawing operations by factor
To be implemented in subclasses."""
self._painter.scale(factor, factor)
def rotate(self, angle):
"""Rotate canvas by angle (in radians)
To be implemented in subclasses."""
self._painter.rotate(degrees(angle))
def translate(self, dx, dy):
"""Translate canvas by dx, dy
To be implemented in subclasses."""
self._painter.translate(dx, dy)
def clear_screen(self):
"""Erases the current screen with a white brush"""
self._painter.save()
self._painter.resetTransform()
self.set_pen(0xFFFFFF)
self.set_brush(0xFFFFFF)
self.draw_rectangle(0, 0, self.size[0], self.size[1])
self._painter.restore()
Renderer.clear_screen(self)
@staticmethod
def __qcolor(color):
"""Returns qcolor for a given ARGB color"""
c = QColor(color)
if color > 0xFFFFFF:
c.setAlpha((color >> 24) & 0xFF)
return c
def set_pen(self, color):
"""Sets the line color.
Color is interpreted as 0xAARRGGBB."""
if color is None:
self._painter.setPen(Qt.NoPen)
else:
self._painter.setPen(self.__qcolor(color))
def set_brush(self, color):
"""Sets the fill color.
Color is interpreted as 0xAARRGGBB."""
if color is None:
self._painter.setBrush(Qt.NoBrush)
else:
self._painter.setBrush(self.__qcolor(color))
def draw_polygon(self, points):
"""Draws a polygon.
Expects a list of points as a list of tuples or as a numpy array."""
self._painter.drawPolygon(
QPolygonF([QPointF(*point[:2]) for point in points]))
def draw_ellipse(self, cx, cy, ra, rb=None):
"""Draws an ellipse."""
if rb is None:
rb = ra
self._painter.drawEllipse(QRectF(cx - ra, cy - ra, 2 * ra, 2 * rb))
def draw_rectangle(self, x, y, w, h):
"""Draws a rectangle."""
self._painter.drawRect(QRectF(x, y, w, h))
def draw_text(self, text, x, y, bgcolor=0):
"""Draws a text string at the defined position."""
pass
def draw_line(self, x1, y1, x2, y2):
"""Draws a line using the current pen from (x1,y1) to (x2,y2)"""
self._painter.drawLine(QLineF(x1, y1, x2, y2))
def paintEvent(self, event):
"""Adapted from http://doc.qt.io/qt-5/qtwidgets-widgets-analogclock-example.html"""
HOURHAND = QPolygon([QPoint(7, 8), QPoint(-7, 8), QPoint(0, -55)])
MINUTEHAND = QPolygon([QPoint(7, 8), QPoint(-7, 8), QPoint(0, -87)])
HOURCOLOR = QColor(Qt.black)
MINUTECOLOR = QColor(0x11, 0x11, 0x11, 0xAA)
painter = QPainter(self)
painter.setRenderHint(QPainter.Antialiasing)
painter.translate(self.width() / 2, self.height() / 2)
SIDE = 200
side = min(self.width(), self.height())
painter.scale(side / SIDE, side / SIDE)
# Background (night/day)
if self._time_to is not None:
time = self._time_to.time()
hour_offset = time.hour() + time.minute() / 60
DAY, NIGHT = QColor(Qt.white), QColor('#5555ff')
if 7 <= hour_offset <= 19:
background = DAY
elif 6 <= hour_offset <= 7:
palette = GradientPaletteGenerator(NIGHT, DAY)
background = palette[(hour_offset - 6) / (7 - 6)]
elif 19 <= hour_offset <= 20:
palette = GradientPaletteGenerator(DAY, NIGHT)
background = palette[(hour_offset - 19) / (20 - 19)]
else:
assert hour_offset < 7 or hour_offset > 20
background = NIGHT
painter.setBrush(QBrush(background))
painter.setPen(HOURCOLOR)
painter.drawEllipse(-SIDE / 2, -SIDE / 2, SIDE, SIDE)
# Minute tickmarks
painter.save()
painter.setPen(MINUTECOLOR)
for j in range(60):
painter.drawLine(94, 0, 97, 0)
painter.rotate(6)
painter.restore()
# Hour tickmarks
painter.save()
painter.setPen(HOURCOLOR)
for _ in range(12):
painter.drawLine(88, 0, 98, 0)
painter.rotate(30)
painter.restore()
# Hour span
if self._time_from is not None:
time_from = self._time_from.time()
time_to = self._time_to.time()
if time_from.secsTo(time_to) / 3600 > .2: # Don't draw really small intervals
hour_from = (time_from.hour() + time_from.minute() / 60) % 12 - 3
hour_to = (time_to.hour() + time_to.minute() / 60) % 12 - 3
startAngle = -hour_to * 30 * 16
spanAngle = -hour_from * 30 * 16 - startAngle
color = QColor(0xFF, 0xFF, 0, 0xAA)
painter.save()
painter.setBrush(QBrush(color, Qt.DiagCrossPattern))
painter.setPen(color.darker(180))
painter.drawPie(-SIDE / 2, -SIDE / 2, SIDE, SIDE, startAngle, spanAngle)
painter.restore()
# Hour and minute hand
if self._time_to is not None:
time = self._time_to.time()
painter.setPen(Qt.NoPen)
painter.save()
painter.setBrush(HOURCOLOR)
painter.rotate(30 * (time.hour() + time.minute() / 60))
painter.drawConvexPolygon(HOURHAND)
painter.restore()
painter.save()
painter.setBrush(MINUTECOLOR)
painter.rotate(6 * (time.minute() + time.second() / 60))
painter.drawConvexPolygon(MINUTEHAND)
painter.restore()
def paintEvent(self, event):
"""Adapted from http://doc.qt.io/qt-5/qtwidgets-widgets-analogclock-example.html"""
HOURHAND = QPolygon([QPoint(7, 8), QPoint(-7, 8), QPoint(0, -55)])
MINUTEHAND = QPolygon([QPoint(7, 8), QPoint(-7, 8), QPoint(0, -87)])
HOURCOLOR = QColor(Qt.black)
MINUTECOLOR = QColor(0x11, 0x11, 0x11, 0xAA)
painter = QPainter(self)
painter.setRenderHint(QPainter.Antialiasing)
painter.translate(self.width() / 2, self.height() / 2)
SIDE = 200
side = min(self.width(), self.height())
painter.scale(side / SIDE, side / SIDE)
# Background (night/day)
if self._time_to is not None:
time = self._time_to.time()
hour_offset = time.hour() + time.minute() / 60
DAY, NIGHT = QColor(Qt.white), QColor('#5555ff')
if 7 <= hour_offset <= 19:
background = DAY
elif 6 <= hour_offset <= 7:
palette = GradientPaletteGenerator(NIGHT, DAY)
background = palette[(hour_offset - 6) / (7 - 6)]
elif 19 <= hour_offset <= 20:
palette = GradientPaletteGenerator(DAY, NIGHT)
background = palette[(hour_offset - 19) / (20 - 19)]
else:
assert hour_offset < 7 or hour_offset > 20
background = NIGHT
painter.setBrush(QBrush(background))
painter.setPen(HOURCOLOR)
painter.drawEllipse(-SIDE / 2, -SIDE / 2, SIDE, SIDE)
# Minute tickmarks
painter.save()
painter.setPen(MINUTECOLOR)
for j in range(60):
painter.drawLine(94, 0, 97, 0)
painter.rotate(6)
painter.restore()
# Hour tickmarks
painter.save()
painter.setPen(HOURCOLOR)
for _ in range(12):
painter.drawLine(88, 0, 98, 0)
painter.rotate(30)
painter.restore()
# Hour span
if self._time_from is not None:
time_from = self._time_from.time()
time_to = self._time_to.time()
if time_from.secsTo(
time_to) / 3600 > .2: # Don't draw really small intervals
hour_from = (time_from.hour() +
time_from.minute() / 60) % 12 - 3
hour_to = (time_to.hour() + time_to.minute() / 60) % 12 - 3
startAngle = -hour_to * 30 * 16
spanAngle = -hour_from * 30 * 16 - startAngle
color = QColor(0xFF, 0xFF, 0, 0xAA)
painter.save()
painter.setBrush(QBrush(color, Qt.DiagCrossPattern))
painter.setPen(color.darker(180))
painter.drawPie(-SIDE / 2, -SIDE / 2, SIDE, SIDE, startAngle,
spanAngle)
painter.restore()
# Hour and minute hand
if self._time_to is not None:
time = self._time_to.time()
painter.setPen(Qt.NoPen)
painter.save()
painter.setBrush(HOURCOLOR)
painter.rotate(30 * (time.hour() + time.minute() / 60))
painter.drawConvexPolygon(HOURHAND)
painter.restore()
painter.save()
painter.setBrush(MINUTECOLOR)
painter.rotate(6 * (time.minute() + time.second() / 60))
painter.drawConvexPolygon(MINUTEHAND)
painter.restore()
