def mousePressEvent(self, event):
if not event.button():
event.ignore()
return
event.accept()
opt = QStyleOptionSlider()
self.initStyleOption(opt)
self.__active_slider = -1
for i, value in enumerate((self.__min_position, self.__max_position)):
opt.sliderPosition = value
if self._hitTestHandle(opt, event.pos()):
self.__active_slider = i
self.__pressed_control = QStyle.SC_SliderHandle
self.triggerAction(self.SliderMove)
self.setRepeatAction(self.SliderNoAction)
self.setSliderDown(True)
break
else:
# If the user clicks the groove between the handles, the whole
# interval is moved
self.__pressed_control = QStyle.SC_SliderGroove
self.__click_offset = self._pixelPosToRangeValue(self._pick(event.pos()))
self.triggerAction(self.SliderMove)
self.setRepeatAction(self.SliderNoAction)
def mousePressEvent(self, event):
""" Handle the mouse press event for the control.
In a typical slider control, when the user clicks on a point in
the slider's total range but not on the thumbtrack, the control
would jump to the value of the click location. For this control,
clicks which are not direct hits will activate both slider
handles for synchronized moving.
"""
if event.button() != Qt.LeftButton:
event.ignore()
return
event.accept()
style = self.style()
pos = event.pos()
opt = QStyleOptionSlider()
self.initStyleOption(opt)
low, high = self._low, self._high
# hit-test the high handle
opt.sliderPosition = high
high_rect = style.subControlRect(
style.CC_Slider, opt, style.SC_SliderHandle, self
)
high_test = high_rect.contains(pos)
# hit-test the low handle if needed.
if high_test:
low_test = False
else:
opt.sliderPosition = low
low_rect = style.subControlRect(
style.CC_Slider, opt, style.SC_SliderHandle, self
)
low_test = low_rect.contains(pos)
# Set the internal state for painting and request an update.
# The click offsets when clicking a thumbtrack are stored in
# units of pixels. The offset for a click in the empty slider
# area is stored in units of value.
self._pressed_control = style.SC_SliderHandle
if high_test:
self._active_thumb = self.HighThumb
self._click_offset = self._pick(pos - high_rect.topLeft())
elif low_test:
self._active_thumb = self.LowThumb
self._click_offset = self._pick(pos - low_rect.topLeft())
else:
self._active_thumb = self.BothThumbs
offset = self._pixelPosToRangeValue(self._pick(pos), opt)
self._click_offset = offset
self.setSliderDown(True)
self.update()
def drawHandle(self, painter, handle):
opt = QStyleOptionSlider()
self._initStyleOption(opt, handle)
opt.subControls = QStyle.SC_SliderHandle
pressed = self.upperPressed
if handle == QxtSpanSlider.LowerHandle:
pressed = self.lowerPressed
if pressed == QStyle.SC_SliderHandle:
opt.activeSubControls = pressed
opt.state |= QStyle.State_Sunken
painter.drawComplexControl(QStyle.CC_Slider, opt)
def drawHandle(self, painter, handle):
opt = QStyleOptionSlider()
self._initStyleOption(opt, handle)
opt.subControls = QStyle.SC_SliderHandle
pressed = self.upperPressed
if handle == QxtSpanSlider.LowerHandle:
pressed = self.lowerPressed
if pressed == QStyle.SC_SliderHandle:
opt.activeSubControls = pressed
opt.state |= QStyle.State_Sunken
painter.drawComplexControl(QStyle.CC_Slider, opt)
def drawSpan(self, painter, rect):
opt = QStyleOptionSlider()
QSlider.initStyleOption(self, opt)
# area
groove = self.style().subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderGroove, self)
if opt.orientation == QtCore.Qt.Horizontal:
groove.adjust(0, 0, -1, 0)
else:
groove.adjust(0, 0, 0, -1)
# pen & brush
painter.setPen(QPen(self.gradientLeftColor, 0))
if opt.orientation == QtCore.Qt.Horizontal:
self.setupPainter(painter, opt.orientation,
groove.center().x(), groove.top(),
groove.center().x(), groove.bottom())
else:
self.setupPainter(painter, opt.orientation, groove.left(),
groove.center().y(), groove.right(),
groove.center().y())
# draw groove
intersected = QtCore.QRectF(rect.intersected(groove))
gradient = QLinearGradient(intersected.topLeft(),
intersected.topRight())
gradient.setColorAt(0, self.gradientLeft)
gradient.setColorAt(1, self.gradientRight)
painter.fillRect(intersected, gradient)
def mouseMoveEvent(self, event):
if self.__pressed_control not in (QStyle.SC_SliderGroove,
QStyle.SC_SliderHandle):
event.ignore()
return
event.accept()
opt = QStyleOptionSlider()
self.initStyleOption(opt)
pos = self._pixelPosToRangeValue(self._pick(event.pos()))
if self.__active_slider < 0:
offset = pos - self.__click_offset
self.__max_position = min(self.__max_position + offset, self.maximum())
self.__min_position = max(self.__min_position + offset, self.minimum())
self.__click_offset = pos
else:
if self.__active_slider == 0:
self.__min_position = max(self.minimum(), pos)
self.__max_position = min(self.maximum(), max(self.__max_position, self.__min_position + 1))
else:
self.__max_position = min(self.maximum(), pos)
self.__min_position = max(self.minimum(), min(self.__min_position, self.__max_position - 1))
self.update()
self.slidersMoved.emit(self.__min_position, self.__max_position)
# This is different from QAbstractSlider, which sets the value
# insider triggerAction() which would be called here instead.
# But I don't want to override that as well, so simply:
if self.hasTracking():
self.setValues(self.__min_position, self.__max_position)
def _subControlRect(self, subcontrol):
"""Replaces QStyle.subControlRect() in _pixelPosToRangeValue().
Return QRect for subcontrol which is one of
QStyle.SC_SliderGrove or QStyle.SC_SliderHandle.
Override this in subclasses that don't use the default groove/handles.
This is used because PyQt<5.5 doesn't expose QProxyStyle.
"""
opt = QStyleOptionSlider()
self.initStyleOption(opt)
return self.style().subControlRect(QStyle.CC_Slider, opt, subcontrol, self)
def mouseMoveEvent(self, event):
""" Handle the mouse move event for the control.
If the user has previously pressed the control, this will move
the slider(s) to the appropriate position and request an update.
"""
if self._pressed_control != QStyle.SC_SliderHandle:
event.ignore()
return
event.accept()
opt = QStyleOptionSlider()
self.initStyleOption(opt)
point = self._pick(event.pos())
click_offset = self._click_offset
thumb = self._active_thumb
if thumb == self.BothThumbs:
new_pos = self._pixelPosToRangeValue(point, opt)
offset = new_pos - click_offset
self._high += offset
self._low += offset
if self._low < self.minimum():
diff = self.minimum() - self._low
self._low += diff
self._high += diff
if self._high > self.maximum():
diff = self.maximum() - self._high
self._low += diff
self._high += diff
self._click_offset = new_pos
self.lowValueChanged.emit(new_pos)
self.highValueChanged.emit(new_pos)
elif thumb == self.LowThumb:
new_pos = self._pixelPosToRangeValue(point - click_offset, opt)
if new_pos >= self._high:
new_pos = self._high - 1
self._low = new_pos
self.lowValueChanged.emit(new_pos)
elif thumb == self.HighThumb:
new_pos = self._pixelPosToRangeValue(point - click_offset, opt)
if new_pos <= self._low:
new_pos = self._low + 1
self._high = new_pos
self.highValueChanged.emit(new_pos)
else:
raise ValueError('Invalid thumb enum value.')
self.update()
def mouseMoveEvent(self, event):
if self.lowerPressed != QStyle.SC_SliderHandle and self.upperPressed != QStyle.SC_SliderHandle:
event.ignore()
return
opt = QStyleOptionSlider()
self.initStyleOption(opt)
m = self.style().pixelMetric(QStyle.PM_MaximumDragDistance, opt, self)
newPosition = self.pixelPosToRangeValue(
self.pick(event.pos()) - self.offset)
if m >= 0:
r = self.rect().adjusted(-m, -m, m, m)
if not r.contains(event.pos()):
newPosition = self.position
# pick the preferred handle on the first movement
if self.firstMovement:
if self.lower == self.upper:
if newPosition < self.lowerValue:
self.swapControls()
self.firstMovement = False
else:
self.firstMovement = False
if self.lowerPressed == QStyle.SC_SliderHandle:
if self.movement == QxtSpanSlider.NoCrossing:
newPosition = min(newPosition, self.upper)
elif self.movement == QxtSpanSlider.NoOverlapping:
newPosition = min(newPosition, self.upper - 1)
if (self.movement == QxtSpanSlider.FreeMovement
and newPosition > self.upper):
self.swapControls()
self.setUpperPosition(newPosition)
else:
self.setLowerPosition(newPosition)
elif self.upperPressed == QStyle.SC_SliderHandle:
if self.movement == QxtSpanSlider.NoCrossing:
newPosition = max(newPosition, self.lowerValue)
elif self.movement == QxtSpanSlider.NoOverlapping:
newPosition = max(newPosition, self.lowerValue + 1)
if (self.movement == QxtSpanSlider.FreeMovement
and newPosition < self.lower):
self.swapControls()
self.setLowerPosition(newPosition)
else:
self.setUpperPosition(newPosition)
event.accept()
def handleMousePress(self, pos, control, value, handle):
opt = QStyleOptionSlider()
self._initStyleOption(opt, handle)
oldControl = control
control = self.style().hitTestComplexControl(QStyle.CC_Slider, opt,
pos, self)
sr = self.style().subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderHandle, self)
if control == QStyle.SC_SliderHandle:
self.position = value
self.offset = self.pick(pos - sr.topLeft())
self.lastPressed = handle
self.setSliderDown(True)
self.emit(SIGNAL("sliderPressed(PyQt_PyObject)"), handle)
if control != oldControl:
self.update(sr)
return control
def paintEvent(self, event):
painter = QStylePainter(self)
# ticks
opt = QStyleOptionSlider()
self.initStyleOption(opt)
opt.subControls = QStyle.SC_SliderTickmarks
painter.drawComplexControl(QStyle.CC_Slider, opt)
# groove
opt.sliderPosition = 20
opt.sliderValue = 0
opt.subControls = QStyle.SC_SliderGroove
painter.drawComplexControl(QStyle.CC_Slider, opt)
# handle rects
opt.sliderPosition = self.lowerPos
lr = self.style().subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderHandle, self)
lrv = self.pick(lr.center())
opt.sliderPosition = self.upperPos
ur = self.style().subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderHandle, self)
urv = self.pick(ur.center())
# span
minv = min(lrv, urv)
maxv = max(lrv, urv)
c = self.style().subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderGroove, self).center()
spanRect = QRect(QPoint(c.x() - 2, minv), QPoint(c.x() + 1, maxv))
if self.orientation() == QtCore.Qt.Horizontal:
spanRect = QRect(QPoint(minv, c.y() - 2), QPoint(maxv, c.y() + 1))
self.drawSpan(painter, spanRect)
# handles
if self.lastPressed == QxtSpanSlider.LowerHandle:
self.drawHandle(painter, QxtSpanSlider.UpperHandle)
self.drawHandle(painter, QxtSpanSlider.LowerHandle)
else:
self.drawHandle(painter, QxtSpanSlider.LowerHandle)
self.drawHandle(painter, QxtSpanSlider.UpperHandle)
def pixelPosToRangeValue(self, pos):
opt = QStyleOptionSlider()
self.initStyleOption(opt)
gr = self.style().subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderGroove, self)
sr = self.style().subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderHandle, self)
if self.orientation() == QtCore.Qt.Horizontal:
slider_length = sr.width()
slider_min = gr.x()
slider_max = gr.right() - slider_length + 1
else:
slider_length = sr.height()
slider_min = gr.y()
slider_max = gr.bottom() - slider_length + 1
return QStyle.sliderValueFromPosition(self.minimum(), self.maximum(),
pos - slider_min,
slider_max - slider_min,
opt.upsideDown)
def paintEvent(self, event):
painter = QStylePainter(self)
# ticks
opt = QStyleOptionSlider()
self.initStyleOption(opt)
opt.subControls = QStyle.SC_SliderTickmarks
painter.drawComplexControl(QStyle.CC_Slider, opt)
# groove
opt.sliderPosition = 20
opt.sliderValue = 0
opt.subControls = QStyle.SC_SliderGroove
painter.drawComplexControl(QStyle.CC_Slider, opt)
# handle rects
opt.sliderPosition = self.lowerPos
lr = self.style().subControlRect(QStyle.CC_Slider, opt, QStyle.SC_SliderHandle, self)
lrv = self.pick(lr.center())
opt.sliderPosition = self.upperPos
ur = self.style().subControlRect(QStyle.CC_Slider, opt, QStyle.SC_SliderHandle, self)
urv = self.pick(ur.center())
# span
minv = min(lrv, urv)
maxv = max(lrv, urv)
c = self.style().subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderGroove, self).center()
spanRect = QRect(QPoint(c.x() - 2, minv), QPoint(c.x() + 1, maxv))
if self.orientation() == QtCore.Qt.Horizontal:
spanRect = QRect(QPoint(minv, c.y() - 2), QPoint(maxv, c.y() + 1))
self.drawSpan(painter, spanRect)
# handles
if self.lastPressed == QxtSpanSlider.LowerHandle:
self.drawHandle(painter, QxtSpanSlider.UpperHandle)
self.drawHandle(painter, QxtSpanSlider.LowerHandle)
else:
self.drawHandle(painter, QxtSpanSlider.LowerHandle)
self.drawHandle(painter, QxtSpanSlider.UpperHandle)
def paintEvent(self, event):
""" Override the paint event to draw both slider handles.
"""
# based on the paintEvent for QSlider:
# http://qt.gitorious.org/qt/qt/blobs/master/src/gui/widgets/qslider.cpp
painter = QPainter(self)
style = self.style()
low, high = self._low, self._high
# Draw the low handle along with the groove and ticks.
opt = QStyleOptionSlider()
self.initStyleOption(opt)
opt.subControls = QStyle.SC_SliderGroove | QStyle.SC_SliderHandle
if self.tickPosition() != self.NoTicks:
opt.subControls |= QStyle.SC_SliderTickmarks
if (self._pressed_control and
self._active_thumb == self.LowThumb or
self._active_thumb == self.BothThumbs):
opt.activeSubControls = self._pressed_control
opt.state |= QStyle.State_Sunken
else:
opt.activeSubControls = QStyle.SC_None
opt.sliderPosition = low
opt.sliderValue = low
style.drawComplexControl(QStyle.CC_Slider, opt, painter, self)
# Draw high handle. The groove and ticks do not need repainting.
opt = QStyleOptionSlider()
self.initStyleOption(opt)
opt.subControls = QStyle.SC_SliderHandle
if (self._pressed_control and
self._active_thumb == self.HighThumb or
self._active_thumb == self.BothThumbs):
opt.activeSubControls = self._pressed_control
opt.state |= QStyle.State_Sunken
else:
opt.activeSubControls = QStyle.SC_None
opt.sliderPosition = high
opt.sliderValue = high
style.drawComplexControl(QStyle.CC_Slider, opt, painter, self)
def get_slider_position(self, slider):
style = slider.style()
opt = QStyleOptionSlider()
return style.subControlRect(QStyle.CC_Slider, opt,
QStyle.SC_SliderHandle)
def paintEvent(self, event):
# based on
# https://github.com/qt/qtbase/blob/f40dbe0d0b54ce83d2168e82905cf4f75059a841/src/widgets/widgets/qslider.cpp#L315
# https://github.com/enthought/traitsui/blob/master/traitsui/qt4/extra/range_slider.py
painter = QStylePainter(self)
minpos = self.__min_position
maxpos = self.__max_position
# Draw the groove
opt = QStyleOptionSlider()
self.initStyleOption(opt)
# Draw empty grove
opt.sliderPosition = opt.minimum
opt.subControls = QStyle.SC_SliderGroove
if self.tickPosition() != self.NoTicks:
opt.subControls |= QStyle.SC_SliderTickmarks
painter.drawComplexControl(QStyle.CC_Slider, opt)
# Draw the highlighted part on top
# Qt4.8 and Qt5.3 draw the highlighted groove in a weird way because they
# transpose opt.rect. Qt5.7 works fine.
if QT_VERSION_STR >= '5.7.0':
opt.subControls = QStyle.SC_SliderGroove
opt.sliderPosition = opt.maximum
if self.orientation() == Qt.Horizontal:
_w = opt.rect.width() / opt.maximum
x = round(_w * minpos)
w = round(_w * (maxpos - minpos))
opt.rect = QRect(x, 0, w, opt.rect.height())
else:
_h = opt.rect.height() / opt.maximum
y = round(_h * minpos)
h = round(_h * (maxpos - minpos))
opt.rect = QRect(0, y, opt.rect.width(), h)
painter.drawComplexControl(QStyle.CC_Slider, opt)
# Draw the handles
for i, position in enumerate((minpos, maxpos)):
opt = QStyleOptionSlider()
self.initStyleOption(opt)
opt.subControls = QStyle.SC_SliderHandle
if self.__pressed_control and (self.__active_slider == i or
self.__active_slider < 0):
opt.activeSubControls = self.__pressed_control
opt.state |= QStyle.State_Sunken
else:
opt.activeSubControls = self.__hovered_control
opt.sliderPosition = position
opt.sliderValue = position
painter.drawComplexControl(QStyle.CC_Slider, opt)
