def set_gain_mu(self, gain):
self.gui.gainMuEdit.setText(QtCore.QString("%1").arg(gain))
def paintEvent(self, event=None):
'''
draws the book - recalled at any point by instance.update()
'''
red_pen = QtGui.QPen(QtCore.Qt.red, 2)
blue_pen = QtGui.QPen(QtCore.Qt.blue, 2)
painter = QtGui.QPainter(self)
currentSlot = 0
painter.setFont(self.font)
# define and draw the white boundary
painter.setBrush(colours.APPT_Background)
painter.setPen(QtGui.QPen(colours.APPT_Background, 1))
top = (self.firstSlot - 1) * self.slotHeight
bottom = (self.lastSlot + 1 - self.firstSlot) * self.slotHeight
colwidth = self.width() - self.timeWidth
rect = QtCore.QRectF(self.timeWidth, top, colwidth, bottom)
painter.drawRect(rect)
# DRAW HORIZONTAL LINES AND TIMES
while currentSlot < self.slotNo:
textneeded = False
if currentSlot % self.textDetail == 0:
textneeded = True
y = currentSlot * self.slotHeight
#- code to check if within the appointment hours
if self.firstSlot <= currentSlot <= self.lastSlot:
painter.setPen(QtGui.QPen(LINECOLOR, 1))
painter.drawLine(self.timeWidth + 1, y, self.width() - 1, y)
if textneeded:
trect = QtCore.QRectF(0, y, self.timeWidth,
y + self.textDetail * self.slotHeight)
painter.setPen(QtGui.QPen(QtCore.Qt.black, 1))
painter.drawLine(0, y, self.timeWidth, y)
painter.drawText(trect, QtCore.Qt.AlignLeft, (QtCore.QString(
self.humanTime(self.dayStartTime +
(currentSlot * self.slotDuration)))))
currentSlot += 1
# layout appts
painter.save()
painter.setPen(QtCore.Qt.black)
option = QtGui.QTextOption(QtCore.Qt.AlignCenter)
option.setWrapMode(QtGui.QTextOption.WordWrap)
for appt in self.appts:
painter.save()
(startcell, endcell, start, fin, name, sno, trt1, trt2, trt3, memo,
flag, cset, modtime) = appt
rect = QtCore.QRectF(self.timeWidth, startcell * self.slotHeight,
self.width() - self.timeWidth,
(endcell - startcell) * self.slotHeight)
if sno != 0 and sno == self.pWidget.selected_serialno:
painter.setBrush(QtGui.QColor("orange"))
elif self.pWidget.mode == self.pWidget.SCHEDULING_MODE:
painter.setBrush(APPTCOLORS["BUSY"])
painter.setPen(GREY_PEN)
elif self.selected_rows == (startcell, endcell):
painter.setBrush(QtGui.QColor("#AAAAAA"))
elif cset in APPTCOLORS:
painter.setBrush(APPTCOLORS[cset])
elif name.upper() in APPTCOLORS:
painter.setBrush(APPTCOLORS[name.upper()])
elif flag == -128:
painter.setBrush(APPTCOLORS["BUSY"])
else:
painter.setBrush(APPTCOLORS["default"])
if not (sno == 0 and
(endcell < self.firstSlot or startcell > self.lastSlot)):
painter.drawRect(rect)
mytext = "%s %s %s %s %s" % (name.title(), trt1, trt2, trt3,
memo)
painter.drawText(rect, mytext, option)
# highlight any appointments booked today
if (sno != 0 and modtime
and modtime.date() == localsettings.currentDay()):
rect = QtCore.QRectF(self.width() - self.timeWidth / 2,
startcell * self.slotHeight,
self.timeWidth / 2,
rect.height()).adjusted(2, 2, -2, -2)
painter.setPen(colours.BOOKED_TODAY)
painter.setBrush(colours.BOOKED_TODAY)
painter.drawEllipse(rect)
painter.restore()
for appt in self.doubleAppts:
(startcell, endcell, start, fin, name, sno, trt1, trt2, trt3, memo,
flag, cset, modtime) = appt
rect = QtCore.QRectF(self.width() - self.timeWidth,
startcell * self.slotHeight,
self.width() - self.timeWidth,
self.slotHeight)
painter.setBrush(APPTCOLORS["DOUBLE"])
painter.drawRect(rect)
painter.setPen(QtGui.QColor("red"))
for slot in self.freeslots:
startcell, endcell = slot
rect = QtCore.QRectF(self.timeWidth, startcell * self.slotHeight,
self.width() - self.timeWidth,
(endcell - startcell) * self.slotHeight)
if slot == self.active_slot:
if self.blink_on:
painter.setBrush(APPTCOLORS["ACTIVE_SLOT_BOLD"])
else:
painter.setBrush(APPTCOLORS["ACTIVE_SLOT"])
if self.ensure_slot_visible:
self.ensure_visible(0, startcell * self.slotHeight)
else:
brush = APPTCOLORS["SLOT"]
if self.enabled_slots:
painter.setOpacity(1)
else:
painter.setOpacity(0.4)
# brush.setAlpha(40)
painter.setBrush(brush)
painter.drawRect(rect)
slot_duration = (endcell - startcell) * self.slotDuration
painter.drawText(rect, "%s mins" % slot_duration, option)
painter.restore()
# highlight current time
if self.setTime:
cellno = self.getCell_from_time(self.setTime)
painter.setPen(blue_pen)
painter.setBrush(QtCore.Qt.blue)
corner1 = [self.timeWidth * 1.4, cellno * self.slotHeight]
corner2 = [self.timeWidth, (cellno - 0.5) * self.slotHeight]
corner3 = [self.timeWidth, (cellno + 0.5) * self.slotHeight]
triangle = corner1 + corner2 + corner3
painter.drawPolygon(QtGui.QPolygon(triangle))
corner1 = [
self.width() - self.timeWidth * 0.4, cellno * self.slotHeight
]
corner2 = [self.width(), (cellno - 0.5) * self.slotHeight]
corner3 = [self.width(), (cellno + 0.5) * self.slotHeight]
triangle = corner1 + corner2 + corner3
painter.drawPolygon(QtGui.QPolygon(triangle))
if self.dragging:
painter.setPen(red_pen)
y = self.drag_startrow * self.slotHeight
y2 = self.drag_endrow * self.slotHeight
painter.drawLine(0, y, self.width(), y)
painter.setBrush(QtGui.QColor("yellow"))
trect = QtCore.QRectF(self.timeWidth, y,
self.width() - self.timeWidth, y2 - y)
painter.drawRect(trect)
droptime = self.drop_time.strftime("%H:%M")
trect = QtCore.QRectF(0, y, self.timeWidth, y2 - y)
painter.drawRect(trect)
painter.drawText(trect, QtCore.Qt.AlignHCenter, droptime)
def _highlightCurrentKeyHead(self):
headText = self._shortcutMemo.getShortcutText(self._currentKey)
self.currentHeadsChanged.emit(QtCore.QString(headText))
def __init__ (self, value):
super(QCustomTableWidgetItem, self).__init__(QtCore.QString('%s' % value))
def __init__(self, value, data):
super(vQlistWidgetItem, self).__init__(QtCore.QString('%s' % value))
self.data = data
def attach_signal2(self, signal):
self.signal2 = signal
self.freq2Edit.setText(
QtCore.QString("%1").arg(self.signal2.frequency()))
self.amp2Edit.setText(
QtCore.QString("%1").arg(self.signal2.amplitude()))
def compile(self, file_path):
self.current_file_path = file_path
self.progress.show()
arduino_path = self.main.settings.arduino_path()
if not arduino_path:
self.set_error("Arduino root path not found", "..nothing to do ..")
return
## Set Envoironment
env = QtCore.QStringList()
env << QtCore.QString("ARDUINO_DIR=").append()
env << QtCore.QString("ARDUINO_BOARD=").append("atmega328")
env << QtCore.QString("ARDUINO_sPORT=").append("s/ssdev/ttyUSB0")
self.process.setEnvironment(env)
print "----------------------------------------"
## Set working dir
sketch_dir = QtCore.QFileInfo(self.current_file_path).absolutePath()
self.process.setWorkingDirectory(sketch_dir)
command = QtCore.QString("sh ")
## Create command sh arduinp_make.sh
#command.append("pwd ") #.append(QtCore.QFileInfo(self.current_file_path).dir().path())
#args = QtCore.QStringList()
command.append(self.main.settings.app_path()).append("/etc/arduino_make.sh compile ")
#command.append(QtCore.QFileInfo(self.current_file_path).dir().path())
print "command=", command
self.process.start(command)
if self.process.waitForStarted():
self.process.waitForFinished()
result = self.process.readAllStandardOutput()
#print type(result), result
error = self.process.readAllStandardError()
#print type(error), error
if error:
print "is error"
self.actionIcon.setIcon(Icon(Ico.CompileError))
self.statusLabel.setText("Error")
self.textWidget.setPlainText(QtCore.QString(error))
else:
print "is ok"
self.statusLabel.setText("OK")
self.actionIcon.setIcon(Icon(Ico.CompileOk))
self.textWidget.setPlainText(QtCore.QString(result))
self.progress.hide()
return
command = QtCore.QString()
## Create command sh arduinp_make.sh
command.append("pwd") # sh ").append(self.main.settings.app_path()).append("/etc/arduino_make.sh compile")
#args = QtCore.QStringList()
#command.append(self.main.settings.app_path()).append("/etc/arduino_make.sh compile ")
#command.append(QtCore.QFileInfo(self.current_file_path).dir().path())
print "command=", command
process = QtCore.QProcess(self)
process.start(command)
if process.waitForStarted():
process.waitForFinished();
result = process.readAllStandardOutput()
#print type(result), result
error = process.readAllStandardError()
#print type(error), error
if error:
self.textWidget.setPlainText(QtCore.QString(error))
else:
self.textWidget.setPlainText(QtCore.QString(result))
def newFile(self):
if self.maybeSave():
self.ui.textEdit.clear()
self.setCurrentFile(QtCore.QString())
def setupUi(self, Dialog):
Dialog.setObjectName("Dialog")
Dialog.resize(480, 327)
self.buttonBox = QtGui.QDialogButtonBox(Dialog)
self.buttonBox.setGeometry(QtCore.QRect(130, 280, 341, 32))
self.buttonBox.setOrientation(QtCore.Qt.Horizontal)
self.buttonBox.setStandardButtons(QtGui.QDialogButtonBox.Cancel
| QtGui.QDialogButtonBox.Ok)
self.buttonBox.setObjectName("buttonBox")
self.comboBox = QtGui.QComboBox(Dialog)
self.comboBox.setGeometry(QtCore.QRect(10, 10, 201, 27))
self.comboBox.setObjectName("comboBox")
self.connect(self.comboBox, QtCore.SIGNAL("currentIndexChanged(int)"),
self.changeEdit)
self.addIcon = QtGui.QIcon("Icons/edit-add.png")
self.addButton = QtGui.QPushButton(self.addIcon, "Add", Dialog)
self.addButton.setGeometry(QtCore.QRect(220, 10, 92, 28))
self.addButton.setObjectName("addButton")
self.connect(self.addButton, QtCore.SIGNAL("clicked()"),
self.addAttachment)
self.line = QtGui.QFrame(Dialog)
self.line.setGeometry(QtCore.QRect(10, 50, 261, 16))
self.line.setFrameShape(QtGui.QFrame.HLine)
self.line.setFrameShadow(QtGui.QFrame.Sunken)
self.line.setObjectName("line")
self.typeBox = QtGui.QComboBox(Dialog)
self.typeBox.setGeometry(QtCore.QRect(20, 70, 100, 27))
self.typeBox.setObjectName("typeBox")
for i in range(50):
self.typeBox.addItem(QtCore.QString())
self.label = QtGui.QLabel(Dialog)
self.label.setGeometry(QtCore.QRect(20, 110, 62, 18))
self.label.setObjectName("label")
self.xEdit = QtGui.QLineEdit(Dialog)
self.xEdit.setGeometry(QtCore.QRect(20, 130, 50, 26))
self.xEdit.setObjectName("xEdit")
self.yEdit = QtGui.QLineEdit(Dialog)
self.yEdit.setGeometry(QtCore.QRect(80, 130, 50, 26))
self.yEdit.setObjectName("yEdit")
self.zEdit = QtGui.QLineEdit(Dialog)
self.zEdit.setGeometry(QtCore.QRect(140, 130, 50, 26))
self.zEdit.setObjectName("zEdit")
self.boneBox = QtGui.QComboBox(Dialog)
self.boneBox.setGeometry(QtCore.QRect(20, 170, 100, 27))
self.boneBox.setObjectName("boneBox")
self.enabledIcon = QtGui.QIcon("Icons/edit-enabled.png")
self.enabledButton = QtGui.QPushButton(self.enabledIcon,
"Edit Enabled", Dialog)
self.enabledButton.setGeometry(QtCore.QRect(20, 200, 140, 28))
self.enabledButton.setObjectName("enabledButton")
self.connect(self.enabledButton, QtCore.SIGNAL("clicked()"),
self.editEnabled)
self.retranslateUi(Dialog)
QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL("accepted()"),
self.finalizeMe)
QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL("rejected()"),
Dialog.reject)
QtCore.QMetaObject.connectSlotsByName(Dialog)
def __init__(self, parent=None):
QtGui.QMainWindow.__init__(self)
self.DEV = True
# TODO - User customisable style
QtGui.QApplication.setStyle(QtGui.QStyleFactory.create('Cleanlooks'))
## Set the title text format
self.title_text = "Arduino IDE - %s"
## Sets up the settings and other global classes
self.settings = app.settings.Settings(self)
self.ut = app.util.Util()
self.api = app.API.API(self)
## Set Window Properties
self.setWindowTitle(self.title_text % "")
self.setWindowIcon(Icon(Ico.Arduino))
self.setMinimumWidth(800)
self.setMinimumHeight(600)
self.setDockNestingEnabled(True)
self.setDockOptions(QtGui.QMainWindow.ForceTabbedDocks
| QtGui.QMainWindow.VerticalTabs)
self.topToolBar = QtGui.QToolBar()
self.topToolBar.setToolButtonStyle(QtCore.Qt.ToolButtonTextBesideIcon)
self.addToolBar(self.topToolBar)
#if self.DEV:
#self.topToolBar.addAction("Load Keywords", self.on_dev_load_keywords)
##############################################################
## File Menu
##############################################################
menuFile = self.menuBar().addMenu("File")
menuSettings = menuFile.addAction(Icon(Ico.Settings), "Settings",
self.on_settings_dialog)
menuFile.addSeparator()
# TODO: Connect this to something
menuQuit = menuFile.addAction(Icon(Ico.Quit), "Quit")
#self.topToolBar.addAction(menuSettings)
##############################################################
## View Menu
##############################################################
menuView = self.menuBar().addMenu("View")
self.groupViewActions = QtGui.QActionGroup(self)
self.connect(self.groupViewActions,
QtCore.SIGNAL("triggered (QAction *)"),
self.on_action_view)
views = []
views.append(['sketches', Ico.Sketches, "Sketches"])
views.append(['api_browser', Ico.Function, "API Browser"])
views.append(['help', Ico.Help, "Help"])
views.append(
['file_system_browser', Ico.FileSystemBrowser, "Files Browser"])
for ki, ico, caption in views:
act = menuView.addAction(Icon(ico), caption)
act.setProperty("ki", ki)
self.topToolBar.addAction(act)
self.groupViewActions.addAction(act)
self.topToolBar.addSeparator()
##############################################################
## Sketch Menu
##############################################################
menuSketch = self.menuBar().addMenu("Sketches")
##############################################################
## Hardware Menu
##############################################################
menuHardware = self.menuBar().addMenu("Hardware")
## Boards
self.actionGroupBoards = QtGui.QActionGroup(self)
self.actionGroupBoards.setExclusive(True)
self.connect(self.actionGroupBoards,
QtCore.SIGNAL("triggered(QAction *)"),
self.on_action_select_board)
self.menuBoards = menuHardware.addMenu(Icon(
Ico.Board), "-- No Board Selected --") # populates later
act = menuHardware.addAction(Icon(Ico.Boards), "Boards",
self.on_action_boards)
self.topToolBar.addAction(act)
menuHardware.addSeparator()
## Bootloaders
self.actionGroupBootLoaders = QtGui.QActionGroup(self)
self.actionGroupBootLoaders.setExclusive(True)
self.connect(self.actionGroupBootLoaders,
QtCore.SIGNAL("triggered(QAction *)"),
self.on_action_bootloader_burn)
self.menuBootLoaders = menuHardware.addMenu(Icon(
Ico.BootLoaderBurn), "Burn Bootloader") # populates later
act = menuHardware.addAction(Icon(Ico.BootLoaders), "Bootloaders",
self.on_action_bootloaders)
self.topToolBar.addAction(act)
self.topToolBar.addSeparator()
##############################################################
## Websites Menu
##############################################################
self.menuWebSites = self.menuBar().addMenu("Websites")
self.menuWebSites.addSeparator()
self.actionEditWebsites = self.menuWebSites.addAction(
"Edit Sites", self.on_websites_dialog)
##############################################################
## Help Menu
##############################################################
menuHelp = self.menuBar().addMenu("Help")
####################################
## Dock Widgets
####################################
helpDockWidget = HelpDockWidget("Help", self, self)
self.addDockWidget(QtCore.Qt.LeftDockWidgetArea, helpDockWidget)
apiDockWidget = APIDockWidget("API", self, self)
self.addDockWidget(QtCore.Qt.LeftDockWidgetArea, apiDockWidget)
#self.tabifyDockWidget(helpDockWidget, apiDockWidget)
##########################################################
## Central Widget
##########################################################
self.mainTabWidget = QtGui.QTabWidget(self)
self.mainTabWidget.setTabsClosable(True)
self.mainTabWidget.setMovable(True)
self.setCentralWidget(self.mainTabWidget)
self.connect(self.mainTabWidget,
QtCore.SIGNAL("tabCloseRequested (int)"),
self.on_close_tab_requested)
self.connect(self.mainTabWidget, QtCore.SIGNAL("currentChanged (int)"),
self.on_tab_change)
## Load sketches and Welcome
self.on_action_view(QtCore.QString("welcome"))
self.on_action_view(QtCore.QString("sketches"))
self.mainTabWidget.setCurrentIndex(0)
##########################################################
## Status Bar
##########################################################
self.statusBar().addPermanentWidget(QtGui.QLabel("Board:"))
self.lblBoard = QtGui.QLabel("-- none --")
self.statusBar().addPermanentWidget(self.lblBoard)
self.statusBar().addPermanentWidget(QtGui.QLabel("Bootloader:"))
self.lblBootloader = QtGui.QLabel("-- none --")
self.statusBar().addPermanentWidget(self.lblBootloader)
##########################################################
## Globally Shared Widgets
##########################################################
## Borads
self.boards = app.Boards.Boards(self)
self.connect(self.boards, QtCore.SIGNAL("board_selected"),
self.on_board_selected)
self.boards.load_current(
) ## THIS actually sets current as event above is not fired in constructor
## API
#self.connect(self.api, QtCore.SIGNAL("some_signal_here"), self.p)
#print self.api.html_index()
#print self.api.tree()
if not self.settings.value("virginity"):
self.on_settings_dialog()
self.settings.restore_window("main_window", self)
self.on_refresh_settings()
def setupUi(self, MainWindow):
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(890, 550)
sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Fixed,
QtGui.QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
MainWindow.sizePolicy().hasHeightForWidth())
MainWindow.setSizePolicy(sizePolicy)
self.centralwidget = QtGui.QWidget(MainWindow)
self.centralwidget.setObjectName(_fromUtf8("centralwidget"))
self.tabWidget = QtGui.QTabWidget(self.centralwidget)
self.tabWidget.setGeometry(QtCore.QRect(10, 10, 320, 510))
self.tabWidget.setObjectName(_fromUtf8("tabWidget"))
self.tab_items = QtGui.QWidget()
self.tab_items.setObjectName(_fromUtf8("tab_items"))
self.formLayoutWidget = QtGui.QWidget(self.tab_items)
self.formLayoutWidget.setGeometry(QtCore.QRect(10, 10, 304, 471))
self.formLayoutWidget.setObjectName(_fromUtf8("formLayoutWidget"))
self.formLayout = QtGui.QFormLayout(self.formLayoutWidget)
self.formLayout.setObjectName(_fromUtf8("formLayout"))
self.label_from = QtGui.QLabel(self.formLayoutWidget)
self.label_from.setObjectName(_fromUtf8("label_from"))
self.formLayout.setWidget(0, QtGui.QFormLayout.LabelRole,
self.label_from)
self.label_to = QtGui.QLabel(self.formLayoutWidget)
self.label_to.setObjectName(_fromUtf8("label_to"))
self.formLayout.setWidget(1, QtGui.QFormLayout.LabelRole,
self.label_to)
self.label_item = QtGui.QLabel(self.formLayoutWidget)
self.label_item.setObjectName(_fromUtf8("label_item"))
self.formLayout.setWidget(2, QtGui.QFormLayout.LabelRole,
self.label_item)
self.comboBox_item = QtGui.QComboBox(self.formLayoutWidget)
self.comboBox_item.setObjectName(_fromUtf8("comboBox_item"))
self.setItemCode()
# self.comboBox_item.addItem(_fromUtf8("120400001"))
# self.comboBox_item.addItem(_fromUtf8("120400001A"))
# self.comboBox_item.addItem(_fromUtf8("120400002"))
# self.comboBox_item.addItem(_fromUtf8("120400002A"))
# self.comboBox_item.addItem(_fromUtf8("120400002B"))
self.formLayout.setWidget(2, QtGui.QFormLayout.FieldRole,
self.comboBox_item)
self.label_mount = QtGui.QLabel(self.formLayoutWidget)
self.label_mount.setObjectName(_fromUtf8("label_mount"))
self.formLayout.setWidget(3, QtGui.QFormLayout.LabelRole,
self.label_mount)
self.spinBox_mount = QtGui.QSpinBox(self.formLayoutWidget)
self.spinBox_mount.setValue(6)
self.spinBox_mount.setObjectName(_fromUtf8("spinBox_mount"))
self.formLayout.setWidget(3, QtGui.QFormLayout.FieldRole,
self.spinBox_mount)
self.pushButton = QtGui.QPushButton(self.formLayoutWidget)
self.pushButton.setObjectName(_fromUtf8("pushButton"))
self.formLayout.setWidget(4, QtGui.QFormLayout.FieldRole,
self.pushButton)
self.calendarWidget_from = QtGui.QCalendarWidget(self.formLayoutWidget)
self.calendarWidget_from.setSelectedDate(QtCore.QDate(2015, 5, 28))
self.calendarWidget_from.setObjectName(
_fromUtf8("calendarWidget_from"))
self.formLayout.setWidget(0, QtGui.QFormLayout.FieldRole,
self.calendarWidget_from)
self.calendarWidget_to = QtGui.QCalendarWidget(self.formLayoutWidget)
self.calendarWidget_to.setObjectName(_fromUtf8("calendarWidget_to"))
self.formLayout.setWidget(1, QtGui.QFormLayout.FieldRole,
self.calendarWidget_to)
self.tabWidget.addTab(self.tab_items, _fromUtf8(""))
self.tab_others = QtGui.QWidget()
self.tab_others.setObjectName(_fromUtf8("tab_others"))
self.tabWidget.addTab(self.tab_others, _fromUtf8(""))
self.tableWidget = QtGui.QTableWidget(self.centralwidget)
self.tableWidget.setGeometry(QtCore.QRect(340, 30, 540, 490))
self.tableWidget.setObjectName(_fromUtf8("tableWidget"))
self.setTableFieldsByItem()
# self.tableWidget.setColumnCount(4)
self.tableWidget.setRowCount(0)
# item = QtGui.QTableWidgetItem()
# self.tableWidget.setHorizontalHeaderItem(0, item)
# item = QtGui.QTableWidgetItem()
# self.tableWidget.setHorizontalHeaderItem(1, item)
# item = QtGui.QTableWidgetItem()
# self.tableWidget.setHorizontalHeaderItem(2, item)
# item = QtGui.QTableWidgetItem()
# self.tableWidget.setHorizontalHeaderItem(3, item)
MainWindow.setCentralWidget(self.centralwidget)
self.toolBar = QtGui.QToolBar(MainWindow)
self.setdb = QtGui.QAction(QtCore.QString("SetDB"), self.toolBar)
self.toolBar.addAction(self.setdb)
self.setItem = QtGui.QAction(QtCore.QString("SetItem"), self.toolBar)
self.toolBar.addAction(self.setItem)
self.saveCsv = QtGui.QAction(QtCore.QString("SaveCSV"), self.toolBar)
self.saveCsv.setEnabled(False)
self.toolBar.addAction(self.saveCsv)
self.toolBar.setObjectName(_fromUtf8("toolBar"))
MainWindow.addToolBar(QtCore.Qt.TopToolBarArea, self.toolBar)
self.retranslateUi(MainWindow)
self.tabWidget.setCurrentIndex(0)
QtCore.QObject.connect(self.setdb,
QtCore.SIGNAL(_fromUtf8("triggered ()")),
self.showDlgSetdb)
QtCore.QObject.connect(self.setItem,
QtCore.SIGNAL(_fromUtf8("triggered ()")),
self.showDlgSetItem)
QtCore.QObject.connect(self.saveCsv,
QtCore.SIGNAL(_fromUtf8("triggered ()")),
self.saveFileCsv)
QtCore.QObject.connect(self.pushButton,
QtCore.SIGNAL(_fromUtf8("pressed ()")),
self.searchByItem)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def populateOneRegionBlockCellSizesTable(self):
pass # 152 prrint "SIZE SIZE SIZE self.blockCellDimTable.height() =", self.blockCellDimTable.height()
pass # 152 prrint "SIZE SIZE SIZE self.blockCellDimTable.parentWidget().height() =", self.blockCellDimTable.parentWidget().height()
pass # 152 prrint "SIZE SIZE SIZE self.blockCellDimTable.width() =", self.blockCellDimTable.width()
pass # 152 prrint "SIZE SIZE SIZE self.blockCellDimTable.parentWidget().width() =", self.blockCellDimTable.parentWidget().width()
pass # 152 prrint "___ - DEBUG ----- CDTableOfBlockCellSizes: populateOneRegionBlockCellSizesTable() = ", self.blockCellDimTable.rowCount()
# prevent blockCellDimTable from emitting any "cellChanged" signals when
# updating its content programmatically:
self.blockCellDimTable.blockSignals(True)
pass # 152 prrint "self.oneBlockCellSizesList =", self.oneBlockCellSizesList
pass # 152 prrint "self.oneBlockCellSizesList[0] =", self.oneBlockCellSizesList[0]
pass # 152 prrint "self.oneBlockCellSizesList[1] =", self.oneBlockCellSizesList[1]
pass # 152 prrint "self.oneBlockCellSizesList[2] =", self.oneBlockCellSizesList[2]
# create a first QTableWidgetItem and place text (i.e. the "x" cell size) from oneBlockCellSizesList in it:
lItem = QtGui.QTableWidgetItem( \
QtCore.QString("%1").arg( self.oneBlockCellSizesList[0] ) )
# this goes to column 1 in the table:
self.blockCellDimTable.setItem(0, 0, lItem)
# create a first QTableWidgetItem and place text (i.e. the "y" cell size) from oneBlockCellSizesList in it:
lItem = QtGui.QTableWidgetItem( \
QtCore.QString("%1").arg(self.oneBlockCellSizesList[1]) )
# this goes to column 1 in the table:
self.blockCellDimTable.setItem(1, 0, lItem)
# create a first QTableWidgetItem and place text (i.e. the "z" cell size) from oneBlockCellSizesList in it:
lItem = QtGui.QTableWidgetItem( \
QtCore.QString("%1").arg(self.oneBlockCellSizesList[2]) )
# this goes to column 1 in the table:
self.blockCellDimTable.setItem(2, 0, lItem)
#
#
# # distribute the available space according to the space requirement of each column or row:
# # TODO TODO: all this widget layout semi/auto/resizing still @#$@*Y@ does not work...
# w = 0
# for i in xrange(self.blockCellDimTable.columnCount()):
# # print "column", i, "has width", self.blockCellDimTable.columnWidth(i)
# w = w + self.blockCellDimTable.columnWidth(i)
# w = w + self.blockCellDimTable.verticalHeader().width()
# w = w + self.blockCellDimTable.verticalScrollBar().width()
# # print "column and everything is", w
#
# h = 0
# for i in xrange(self.blockCellDimTable.rowCount()):
# # print "row", i, "has height", self.blockCellDimTable.rowHeight(i)
# h = h + self.blockCellDimTable.rowHeight(i)
# h = h + self.blockCellDimTable.horizontalHeader().height()
# h = h + self.blockCellDimTable.horizontalScrollBar().height()
# # print "column and everything is", h
# # self.blockCellDimTable.resize(w + 4, h + 4)
# # self.blockCellDimTable.parentWidget().resize(w + 4, h + 4)
#
self.blockCellDimTable.resizeRowsToContents()
self.blockCellDimTable.resizeColumnsToContents()
# print "SIZE SIZE SIZE self.blockCellDimTable.height() =", self.blockCellDimTable.height()
# print "SIZE SIZE SIZE self.blockCellDimTable.parentWidget().height() =", self.blockCellDimTable.parentWidget().height()
# print "SIZE SIZE SIZE self.blockCellDimTable.width() =", self.blockCellDimTable.width()
# print "SIZE SIZE SIZE self.blockCellDimTable.parentWidget().width() =", self.blockCellDimTable.parentWidget().width()
# start with no table cell selected, and the user can then click to select:
self.blockCellDimTable.setCurrentCell(-1, -1)
# self.blockCellDimTable.parentWidget().resize(self.blockCellDimTable.width(),self.blockCellDimTable.height())
# allow blockCellDimTable to emit "cellChanged" signals now that we're done
# updating its content programmatically:
self.blockCellDimTable.blockSignals(False)
def __init__(self, *args, **kwargs):
self.monitor = kwargs[MONITOR_KEY.KWARG]
del kwargs[MONITOR_KEY.KWARG]
self.pv_dict = kwargs['pv_dict']
del kwargs['pv_dict']
super(PvListWindow, self).__init__(*args, **kwargs)
# Set up the user interface from Designer.
self.load_ui("windows/pv_list_window.ui")
self.setWindowTitle(settings.APP_NAME)
self.label_map = {}
self.cainfo_map = {}
pv_list = []
self.drag_text_mixin_initialize()
for k, v in self.pv_dict.iteritems():
pv_list.append((k, v))
pv_list.sort(key=lambda item: item[1])
item_count = len(pv_list)
grid = self.gridLayout
cols = 2
rows = int(math.ceil(float(len(pv_list)) / float(cols)))
font = QtGui.QFont('Courier', 10)
# font.setWeight(QtGui.QFont.Light)
index = 0
for x in xrange(cols):
for y in xrange(rows):
if index >= item_count:
break
item = pv_list[index]
index += 1
print "Adding PV", item
label0 = QtGui.QLabel()
label0.setText(QtCore.QString(item[0]))
label0.setFont(font)
label1 = QtGui.QLabel()
pv_name = item[1]
# label1.setText(QtCore.QString(item[0]))
label1.setText(QtCore.QString(pv_name))
label1.setToolTip(QtCore.QString(pv_name))
label1.setFont(font)
self.set_drag_text(label1, pv_name)
label2 = QtGui.QLabel()
label2.setText(QtCore.QString(pv_name))
label2.setToolTip(QtCore.QString(pv_name))
label2.setFont(font)
self.set_drag_text(label2, pv_name)
self.label_map[pv_name] = (label1, label2)
grid.addWidget(label0, y, x * 4)
grid.addWidget(label1, y, x * 4 + 1)
grid.addWidget(label2, y, x * 4 + 2)
if not self.monitor.is_local(pv_name):
pushButton = QtGui.QPushButton('cainfo')
pushButton.setMaximumWidth(50)
pushButton.setMaximumHeight(20)
grid.addWidget(pushButton, y, x * 4 + 3)
pushButton.clicked.connect(lambda arg, pv_name=pv_name:
self.handle_pushButton(pv_name))
self.monitor.connect(pv_name, self.handle_pv)
self.handle_pv(pv_name)
def set_loop_bw(self, bw):
self.gui.alphaEdit.setText(QtCore.QString("%1").arg(bw))
def make_file_dialog(self, title, dir, filter):
fileD = QtGui.QFileDialog(self)
fileD.setWindowTitle(QtCore.QString(title))
fileD.setFilter(QtCore.QString(filter))
fileD.setDirectory(QtCore.QString(dir))
return fileD
def __init__(self, f_control, f_oPrf=None, f_parent=None):
"""
constructor.
cria uma dialog de edição de performances.
@param f_control: control manager do editor da base de dados do TrackS.
@param f_oPrf: performance a editar.
@param f_parent: janela vinculada.
"""
# logger
l_log.info("__init__:>>")
# verifica parâmetros de entrada
assert (f_control)
# init super class
super(dlgPrfEditNEW, self).__init__(f_parent)
# salva o control manager localmente
self._control = f_control
# obtém o gerente de configuração
self._config = f_control.oConfig
assert (self._config)
# obtém o dicionário de configuração
self._dctConfig = self._config.dctConfig
assert (self._dctConfig)
# salva a parent window localmente
self._wndParent = f_parent
# salva os parâmetros localmente
self._oPrf = f_oPrf
# pathnames
self._sPN = None
# monta a dialog
self.setupUi(self)
# configura título da dialog
self.setWindowTitle(u"TrackS - Edição de Performances")
# atualiza na tela os dados da performance
self.updatePrfData()
# configurações de conexões slot/signal
self.configConnects()
# configurações de títulos e mensagens da janela de edição
self.configTexts()
# restaura as configurações da janela de edição
self.restoreSettings()
# configura botões
self.bbxEditPrf.button(
QtGui.QDialogButtonBox.Cancel).setText("&Cancela")
self.bbxEditPrf.button(QtGui.QDialogButtonBox.Ok).setFocus()
# força uma passgem pela edição de chave
self.on_qleInd_textEdited(QtCore.QString())
# logger
l_log.info("__init__:<<")
def attach_signal1(self, signal):
self.signal1 = signal
self.freq1Edit.setText(
QtCore.QString("%1").arg(self.signal1.frequency()))
self.amp1Edit.setText(
QtCore.QString("%1").arg(self.signal1.amplitude()))
def __init__(self):
"""
Class constructor
>>> 1 + 1
2
>>>
"""
super(DySMainWindow, self).__init__()
# self.setAttribute(QtCore.Qt.WA_TranslucentBackground, 90)
# minimum size
self.setMinimumSize(500, 500)
# computer information
self._hostname = socket.gethostname()
print "self._hostname =", self._hostname
# style
# self.setStyle("windows")
# plastique
# cde
# motif
# sgi
# windows
# cleanlooks
# mac
# icon
self.setWindowIcon(QtGui.QIcon(":/application.png"))
QtGui.QSystemTrayIcon(QtGui.QIcon(":/application.png"))
# location of window on self.screen_geometry
self.window_offset_x = 250
self.window_offset_y = 50
# language settings
self.setLocale(QtCore.QLocale(QtCore.QLocale.English, QtCore.QLocale.UnitedStates))
# window name
self.setWindowTitle("DyS")
# font
self.font = QtGui.QFont("Consolas", 10)
# mouse tracking
self.setMouseTracking(True)
# context menu
self.setContextMenuPolicy(QtCore.Qt.CustomContextMenu)
# main window flags
self.flags = QtCore.Qt.Window
__main_dir = current_working_directory
self._working_directory = QtCore.QString(os.path.abspath(__main_dir).replace("/", "\\"))
# get screen geometry size
self.screen_geometry = QtGui.QDesktopWidget().screenGeometry()
# move
# self.move(self.window_offset_x, self.window_offset_y)
dy = .05*self.screen_geometry.height()
# size of application
# position main widget on self.screen_geometry
self.setGeometry(.25*self.screen_geometry.width(), dy, .5*self.screen_geometry.width(), .5*self.screen_geometry.width())
# MBD system
MBD_folder_name_ = None
self.MBD_file_abs_path = None
# self.MBD_filename = "0_0_0_double_pendulum.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_0_0_double_pendulum"
# self.MBD_filename = "dys_0_.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_"
# self.MBD_filename = "dys_0_2_1.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_2_1"
# self.MBD_filename = "dys_0_3_prismatic_joint.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_3_prismatic_joint"
# self.MBD_filename = "dys_0_4.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_4"
# self.MBD_filename = "dys_0_5.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_5"
# self.MBD_filename = "dys_0_6_1.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_6_1"
# self.MBD_filename = "dys_0_6_2.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_6_2"
# self.MBD_filename = "dys_0_7_0_1.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_0_1"
# self.MBD_filename = "dys_0_7_0_2.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_0_2"
# self.MBD_filename = "0_7_3_3_kinematic_analysis_1arm.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_3_kinematic_analysis_1arm"
# self.MBD_filename = "0_7_3_3_kinematic_analysis_2arm.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_3_kinematic_analysis_2arm"
# self.MBD_filename = "0_7_3_3_kinematic_analysis_slider_crank.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_3_kinematic_analysis_slider_crank"
# self.MBD_filename = "0_7_3_3_kinematic_analysis_4bar.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_3_kinematic_analysis_4bar"
# self.MBD_filename = "0_7_3_3_kinematic_analysis_efi.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_3_kinematic_analysis_efi"
# self.MBD_filename = "0_7_3_3_dynamic_analysis_efi.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_3_dynamic_analysis_efi"
# self.MBD_filename = "0_7_3_3_dynamic_analysis_efi_V2.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_3_dynamic_analysis_efi_V2"
# self.MBD_filename = "dys_0_7_3_0.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_0"
# self.MBD_filename = "0_7_3_0_plane_sphere.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_0_plane_sphere"
# self.MBD_filename = "dys_0_7_2_revolute_clearence_joint.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_2_revolute_clearence_joint"
# self.MBD_filename = "0_7_2_revolute_clearance_joint_1.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_2_revolute_clearance_joint_1"
# self.MBD_filename = "0_7_3_0_contact_models.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_0_contact_models"
self.MBD_filename = "0_7_3_0_contact_models_cylinder.dprj"
MBD_folder_name_ = "dynamic_systems\\0_7_3_0_contact_models_cylinder"
# self.MBD_filename = "0_7_3_2_pin_slot_clearance_joint.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_2_pin_slot_clearance_joint"
# self.MBD_filename = "0_7_3_2_pin_slot_clearance_joint_2.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_2_pin_slot_clearance_joint_2"
# self.MBD_filename = "0_7_3_2_pin_slot_clearance_joint_paper.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_2_pin_slot_clearance_joint_paper"
# self.MBD_filename = "0_7_3_2_pin_slot_clearance_joint_paper_1.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_2_pin_slot_clearance_joint_paper_1"
# self.MBD_filename = "0_7_3_2_pin_slot_clearance_joint_paper_2.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_2_pin_slot_clearance_joint_paper_2"
# self.MBD_filename = "0_7_1_0_spring_translational.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_1_0_spring_translational"
# self.MBD_filename = "0_8_0_surface_roughness.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_8_0_surface_roughness"
# self.MBD_filename = "0_9_0_brush_slip-ring.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_9_0_brush_slip-ring"
# self.MBD_filename = "0_9_1_brush_slip-ring.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_9_1_brush_slip-ring"
# self.MBD_filename = "0_9_2_multiple_contacts.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_9_2_multiple_contacts"
# self.MBD_filename = "0_9_3_brush_slip-ring.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_9_3_brush_slip-ring"
# self.MBD_filename = "0_9_4_brush_slip-ring.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_9_4_brush_slip-ring"
# self.MBD_filename = "0_9_5_brush_energy.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_9_5_brush_energy"
# self.MBD_filename = "0_9_6_brush_slip-ring.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_9_6_brush_slip-ring"
# self.MBD_filename = "1_0_0_ancf-beam.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-beam"
# self.MBD_filename = "1_0_0_ancf-cantilever_1element.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-cantilever_1element"
# self.MBD_filename = "1_0_0_ancf-cantilever_2elements.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-cantilever_2elements"
# self.MBD_filename = "1_0_0_ancf-cantilever_2elements.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-cantilever_2elements"
#
# self.MBD_filename = "1_0_0_ancf-cantilever_4elements.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-cantilever_4elements"
#
# self.MBD_filename = "1_0_0_ancf-cantilever_8elements.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-cantilever_8elements"
#
# self.MBD_filename = "1_0_0_ancf-cantilever_16elements.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-cantilever_16elements"
#
# self.MBD_filename = "1_0_0_ancf-cantilever_32elements.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-cantilever_32elements"
# self.MBD_filename = "1_0_0_ancf-free_falling_flexible_pendulum.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-free_falling_flexible_pendulum"
# self.MBD_filename = "1_0_0_ancf-cantilever_M.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-cantilever_M"
# self.MBD_filename = "1_0_0_ancf-beam_contact.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_0_ancf-beam_contact"
# self.MBD_filename = "1_0_1_ancf_frame.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_ancf_frame"
# self.MBD_filename = "1_0_1_geometry_test.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_geometry_test"
# self.MBD_filename = "1_0_1_external_force.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_external_force"
# self.MBD_filename = "1_0_1_paper_2_eigenfrequencies.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_eigenfrequencies"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_point_mass.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_point_mass"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_2.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_2"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_sub.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_sub"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_2.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_2"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_2_y_spring=-1mm.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_2_y_spring=-1mm"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_2_y_spring=+1mm.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_2_y_spring=+1mm"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_2_prestress_2x.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_2_prestress_2x"
#self.MBD_filename = "1_0_1_paper_2_dynamic_system_2_prestress_params_2x.dprj"
#MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_2_prestress_params_2x"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_2_prestress_0.5x.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_2_prestress_0.5x"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_rigid.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_rigid"
# self.MBD_filename = "1_0_1_paper_2_dynamic_system_rigid_2.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_dynamic_system_rigid_2"
# self.MBD_filename = "0_7_3_2_pin_slot_clearance_joint_testing.dprj"
# MBD_folder_name_ = "dynamic_systems\\0_7_3_2_pin_slot_clearance_joint_testing"
# self.MBD_filename = "1_0_1_paper_2_rigid_joint_rigid_flexible.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_rigid_joint_rigid_flexible"
# self.MBD_filename = "1_0_1_paper_2_revolute_joint_flexible_flexible.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_revolute_joint_flexible_flexible"
# self.MBD_filename = "1_0_1_paper_2_revolute_joint_rigid_flexible.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_revolute_joint_rigid_flexible"
# self.MBD_filename = "1_0_1_paper_2_rigid_joint_point_mass_flexible.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_rigid_joint_point_mass_flexible"
# self.MBD_filename = "1_0_1_paper_2_rigid_joint_point_mass_flexible_offset.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_rigid_joint_point_mass_flexible_offset"
# self.MBD_filename = "1_0_1_paper_2_rigid_joint_rigid_flexible.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_rigid_joint_rigid_flexible"
# self.MBD_filename = "1_0_1_paper_2_rigid_joint_rigid_flexible_2.dprj"
# MBD_folder_name_ = "dynamic_systems\\1_0_1_paper_2_rigid_joint_rigid_flexible_2"
# predefine attributes
self.simulation_control_widget = None
self._visualization_widget = "vtk"
# file is not defined
if MBD_folder_name_ is None:
self.MBD_folder_abs_path = os.getcwd()
self.MBD_filename = project_filename = "Model_1"
print "File is not defined"
# file is defined
else:
self._working_directory = os.path.join(os.getcwd(), "..")
self.MBD_file_abs_path = os.path.abspath(os.path.join(self._working_directory, MBD_folder_name_, self.MBD_filename))
self.MBD_folder_abs_path = os.path.join(self._working_directory, MBD_folder_name_)
project_filename = os.path.basename(self.MBD_folder_abs_path)
self._file_types = "Dynamic System Project File (*.dprj);;Multibody System File (*.mbd)"
self.project = MBD_system_items.MBDsystemItem("MBDProject", parent=None)
self.project.dys = self
# print "self.MBD_folder_abs_path =", self.MBD_folder_abs_path
self.MBD_system = MBDsystem(MBD_file_abs_path=self.MBD_file_abs_path,
MBD_folder_abs_path=self.MBD_folder_abs_path,
MBD_filename=project_filename,
dys=self,
parent=self.project)
# tree view widget
self.tree_view_widget = TreeViewWidget(self.project, self.MBD_system, parent=self)
self.tree_view_widget.setWindowFlags(self.flags)
# self.tree_view_widget.show()
# move
self.tree_view_widget.move(.18*self.screen_geometry.width() - self.tree_view_widget.frameGeometry().width(), dy)#self.frameGeometry().width(), self.frameGeometry().height())
self.tree_view_widget.resize(.20*self.screen_geometry.width(), 0.8 * self.screen_geometry.height())
# simulation control widget
self.simulation_control_widget = SimulationControlWidget(MBD_system=self.MBD_system, parent=self)
self.simulation_control_widget.setWindowFlags(self.flags)
# self.simulation_control_widget.show()
# move
self.simulation_control_widget.move(.25*self.screen_geometry.width() + self.geometry().width(), dy)
# preferences widget
self.preferences_widget = PreferencesWidget(self.simulation_control_widget, parent=None)
# graph widget - test
for measure in self.MBD_system.measures:
measure.graph_widget.setWindowFlags(self.flags)
measure.graph_widget.show()
# set central widget
self.setCentralWidget(self.simulation_control_widget.vtkWidget)
# self.simulation_control_widget.vtkWidget.displayText()
# print "2 =", self.simulation_control_widget.vtkWidget.vtkWidget.GetSize()
# if self.simulation_control_widget.opengl_widget is not None:
# self.setCentralWidget(self.simulation_control_widget.opengl_widget)
# init graph widget - test
# graph_widget = GraphWidget(parent=self)
# graph_widget.setWindowFlags(self.flags)
# graph_widget.show()
# output widget
# maybe put in new thread? if output will be large
# self.OutputWidget = OutputWidget(parent=self)
# self.OutputWidget.setWindowFlags(self.flags)
# self.OutputWidget.show()
# job list widget
self.JobListWidget = JobListWidget(job_list_=["job1", "job2", "job3"], parent=self)
self.JobListWidget.setWindowFlags(self.flags)
# python console
self.python_console = None#PythonConsole()
# resize
# self.resize(self.simulation_control_widget.opengl_widget.initial_window_width, self.simulation_control_widget.opengl_widget.initial_window_height)
# create actions
self.create_actions()
# create menus
self.create_menus()
# create status bar
self.create_status_bar()
# signals and connections
self.connect_signals()
def set_error(self, title, shell): self.actionIcon.setIcon(Icon(Ico.CompileError)) self.statusLabel.setText(title) self.textWidget.setPlainText(QtCore.QString(shell))
def run_benford(self):
employeeName = str(self.getItems()[1]).strip("(PyQt4.QtCore.QString()")
MySupervisor = str(
self.getItems()[2:]).strip("(PyQt4.QtCore.QString() u')")
valuesList = self.read_File()
#check if this is not the file we wanted or if the file doesnt exist anymore
if valuesList is 0 or self.getItems() is None:
print "Nothing yet"
else:
listOfOccurances = [
0, 0, 0, 0, 0, 0, 0, 0, 0
] #setting digit occurance to 0 for every digit
leadingValues = []
try:
for value in valuesList:
digit = str(value).lstrip()
leadingDigit = self.finding_leading_digit(digit)
leadingValues.append(leadingDigit)
if leadingDigit != 0:
listOfOccurances[leadingDigit - 1] += 1
except Exception as error:
print error
#return leadingValues,listOfOccurances
# print "Occurance by digit %s"%str(Counter(leadingValues)).strip("Counter()")
SumOfDigitis = 0
for i in (Counter(leadingValues)).values():
SumOfDigitis += i
frequencyOfOccurance = []
myKeys = []
print "Digit\t\tFrequency of occurance"
for key, item in (Counter(leadingValues)).items():
frequencyOfOccurance.append(100 * float(item) /
float(SumOfDigitis))
myKeys.append(key)
self.myDld = QtGui.QWidget()
self.table = QtGui.QTableWidget()
self.table.setRowCount(len(myKeys))
self.table.setColumnCount(5)
self.table.setHorizontalHeaderLabels(
QtCore.QString(
"First Digit;Actual Distribution;Benford's Law Distribution;Deviation;Anomaly?"
).split(";"))
self.table.verticalHeader().hide()
header = self.table.horizontalHeader()
header.setResizeMode(
QtGui.QHeaderView.ResizeToContents
) #can be ResizeTocontents,Stretch,Interactive(default),Fixed
header.setStretchLastSection(True)
item = QtGui.QTableWidgetItem()
Allnumbers = [float(n) for n in range(1, 10)]
benfords = [log10(1 + 1 / d) for d in Allnumbers]
#print "Actual Distribution and the Distribution as predicted by Benfords Law"
#print "First Digit\t\tActual Distribution\t\tBenford's Distribution\t\tDeviation from the Law"
flagged_result = []
for keys, values, ben in zip(myKeys, frequencyOfOccurance,
benfords):
self.label1 = QtGui.QLabel()
self.label2 = QtGui.QLabel()
self.label3 = QtGui.QLabel()
self.label4 = QtGui.QLabel()
self.label5 = QtGui.QLabel("Yes")
self.label5.setStyleSheet(
_fromUtf8(
"font: 75 italic 16pt \"Century Schoolbook L\";\n"
"color:rgb(0, 0, 250);\n"
"background:rgb(255, 69, 0)"))
print "\t%d\t\t\t %5.1f%%\t\t\t\t %5.1f%%\t\t\t\t %5.1f%%" % (
keys, values, ben * 100., abs(values - (ben * 100.)))
key = keys
actual = round(values, 2)
law = round(ben * 100., 2)
diff = round(abs(values - (ben * 100.)), 2)
self.label1.setText(QtCore.QString(str(actual)))
self.label2.setText(QtCore.QString(str(law)))
self.label3.setText(QtCore.QString(str(diff)))
self.label4.setText(QtCore.QString(str(key)))
self.table.setCellWidget(key - 1, 0, self.label4)
self.table.setCellWidget(key - 1, 1, self.label1)
self.table.setCellWidget(key - 1, 2, self.label2)
self.table.setCellWidget(key - 1, 3, self.label3)
if diff > 5:
#self.table.setStyleSheet(_fromUtf8("background:red"))
self.table.setCellWidget(key - 1, 4, self.label5)
flagged_result.append(diff)
if len(flagged_result) is not 0:
self.Audit_Result()
else:
self.info.setWindowTitle("File opened for view")
self.info.setText(
"We did not detect any anomaly in this file.\nYou shall proceed to view it anyway!"
)
self.info.exec_()
layout = QtGui.QVBoxLayout()
layout.addWidget(self.table)
self.myDld.setLayout(layout)
self.myDld.resize(600, 400)
self.myDld.setWindowTitle("Actual Observation against Benford's ")
self.myDld.show()
def selectMashup(self, name):
itemlist = self.mashupsList.findItems(QtCore.QString(name),
QtCore.Qt.MatchExactly)
if len(itemlist) == 1:
item = itemlist[0]
self.mashupsList.setCurrentItem(item)
def setupUi(self, MainWindow):
MainWindow.setObjectName("MainWindow")
MainWindow.resize(854, 644)
font = QtGui.QFont()
font.setPointSize(10)
MainWindow.setFont(font)
icon = QtGui.QIcon()
icon.addPixmap(QtGui.QPixmap(":/icon/query.png"), QtGui.QIcon.Normal,
QtGui.QIcon.Off)
MainWindow.setWindowIcon(icon)
self.centralwidget = QtGui.QWidget(MainWindow)
self.centralwidget.setObjectName("centralwidget")
self.verticalLayout = QtGui.QVBoxLayout(self.centralwidget)
self.verticalLayout.setObjectName("verticalLayout")
self.groupBox = QtGui.QGroupBox(self.centralwidget)
self.groupBox.setObjectName("groupBox")
self.horizontalLayout = QtGui.QHBoxLayout(self.groupBox)
self.horizontalLayout.setObjectName("horizontalLayout")
self.label = QtGui.QLabel(self.groupBox)
self.label.setAlignment(QtCore.Qt.AlignCenter)
self.label.setObjectName("label")
self.horizontalLayout.addWidget(self.label)
self.dateEdit_From = QtGui.QDateEdit(self.groupBox)
self.dateEdit_From.setCalendarPopup(True)
self.dateEdit_From.setObjectName("dateEdit_From")
self.horizontalLayout.addWidget(self.dateEdit_From)
self.label_2 = QtGui.QLabel(self.groupBox)
self.label_2.setAlignment(QtCore.Qt.AlignCenter)
self.label_2.setObjectName("label_2")
self.horizontalLayout.addWidget(self.label_2)
self.dateEdit_To = QtGui.QDateEdit(self.groupBox)
self.dateEdit_To.setCalendarPopup(True)
self.dateEdit_To.setObjectName("dateEdit_To")
self.horizontalLayout.addWidget(self.dateEdit_To)
self.label_3 = QtGui.QLabel(self.groupBox)
self.label_3.setAlignment(QtCore.Qt.AlignCenter)
self.label_3.setObjectName("label_3")
self.horizontalLayout.addWidget(self.label_3)
self.comboBox_SearchName = QtGui.QComboBox(self.groupBox)
self.comboBox_SearchName.setEditable(True)
self.comboBox_SearchName.setObjectName("comboBox_SearchName")
self.horizontalLayout.addWidget(self.comboBox_SearchName)
self.label_4 = QtGui.QLabel(self.groupBox)
self.label_4.setAlignment(QtCore.Qt.AlignCenter)
self.label_4.setObjectName("label_4")
self.horizontalLayout.addWidget(self.label_4)
self.comboBox_SearchCategory = QtGui.QComboBox(self.groupBox)
self.comboBox_SearchCategory.setEditable(True)
self.comboBox_SearchCategory.setObjectName("comboBox_SearchCategory")
self.horizontalLayout.addWidget(self.comboBox_SearchCategory)
self.label_5 = QtGui.QLabel(self.groupBox)
self.label_5.setAlignment(QtCore.Qt.AlignCenter)
self.label_5.setObjectName("label_5")
self.horizontalLayout.addWidget(self.label_5)
self.comboBox_InOutCome = QtGui.QComboBox(self.groupBox)
self.comboBox_InOutCome.setEditable(True)
self.comboBox_InOutCome.setObjectName("comboBox_InOutCome")
self.comboBox_InOutCome.addItem(QtCore.QString())
self.comboBox_InOutCome.setItemText(0, "")
self.comboBox_InOutCome.addItem(QtCore.QString())
self.comboBox_InOutCome.addItem(QtCore.QString())
self.horizontalLayout.addWidget(self.comboBox_InOutCome)
self.pushButton_Query = QtGui.QPushButton(self.groupBox)
self.pushButton_Query.setObjectName("pushButton_Query")
self.horizontalLayout.addWidget(self.pushButton_Query)
self.verticalLayout.addWidget(self.groupBox)
self.tableView = QtGui.QTableView(self.centralwidget)
font = QtGui.QFont()
font.setFamily("MS Shell Dlg 2")
font.setPointSize(10)
self.tableView.setFont(font)
self.tableView.setContextMenuPolicy(QtCore.Qt.ActionsContextMenu)
self.tableView.setSelectionBehavior(QtGui.QAbstractItemView.SelectRows)
self.tableView.setObjectName("tableView")
self.verticalLayout.addWidget(self.tableView)
MainWindow.setCentralWidget(self.centralwidget)
self.menubar = QtGui.QMenuBar(MainWindow)
self.menubar.setGeometry(QtCore.QRect(0, 0, 854, 20))
self.menubar.setObjectName("menubar")
self.menu_F = QtGui.QMenu(self.menubar)
self.menu_F.setObjectName("menu_F")
self.menu_O = QtGui.QMenu(self.menubar)
self.menu_O.setObjectName("menu_O")
MainWindow.setMenuBar(self.menubar)
self.statusbar = QtGui.QStatusBar(MainWindow)
self.statusbar.setObjectName("statusbar")
MainWindow.setStatusBar(self.statusbar)
self.toolBar = QtGui.QToolBar(MainWindow)
self.toolBar.setToolButtonStyle(QtCore.Qt.ToolButtonTextBesideIcon)
self.toolBar.setObjectName("toolBar")
MainWindow.addToolBar(QtCore.Qt.TopToolBarArea, self.toolBar)
self.action_Exit = QtGui.QAction(MainWindow)
icon1 = QtGui.QIcon()
icon1.addPixmap(QtGui.QPixmap(":/icon/exit.png"), QtGui.QIcon.Normal,
QtGui.QIcon.Off)
self.action_Exit.setIcon(icon1)
self.action_Exit.setObjectName("action_Exit")
self.action_Print = QtGui.QAction(MainWindow)
icon2 = QtGui.QIcon()
icon2.addPixmap(QtGui.QPixmap(":/icon/print.png"), QtGui.QIcon.Normal,
QtGui.QIcon.Off)
self.action_Print.setIcon(icon2)
self.action_Print.setObjectName("action_Print")
self.action_Edit = QtGui.QAction(MainWindow)
icon3 = QtGui.QIcon()
icon3.addPixmap(QtGui.QPixmap(":/icon/edit.png"), QtGui.QIcon.Normal,
QtGui.QIcon.Off)
self.action_Edit.setIcon(icon3)
self.action_Edit.setObjectName("action_Edit")
self.action_Delete = QtGui.QAction(MainWindow)
icon4 = QtGui.QIcon()
icon4.addPixmap(QtGui.QPixmap(":/icon/delete.png"), QtGui.QIcon.Normal,
QtGui.QIcon.Off)
self.action_Delete.setIcon(icon4)
self.action_Delete.setObjectName("action_Delete")
self.menu_F.addAction(self.action_Exit)
self.menu_O.addAction(self.action_Print)
self.menubar.addAction(self.menu_F.menuAction())
self.menubar.addAction(self.menu_O.menuAction())
self.toolBar.addAction(self.action_Print)
self.label_2.setBuddy(self.dateEdit_To)
self.label_3.setBuddy(self.comboBox_SearchName)
self.label_4.setBuddy(self.comboBox_SearchCategory)
self.label_5.setBuddy(self.comboBox_SearchCategory)
self.retranslateUi(MainWindow)
QtCore.QObject.connect(self.action_Exit, QtCore.SIGNAL("activated()"),
MainWindow.close)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def settingsKeyJoin(*keys):
keys = [(str(key) if isinstance(key, QtCore.QString) else key)
for key in keys if key]
return QtCore.QString(posixpath.join(*keys))
def addButton(self, first, type_="move", v=None, parent=None):
'''Add a button that creates a target for future moves.'''
c = self.c
p = c.p
if v is None:
v = p.v
sc = scriptingController(c)
mb = quickMoveButton(self, v, first, type_=type_)
txt = self.txts[type_]
if parent: # find parent button
for i in self.buttons:
if i[0].target.gnx == parent:
parent = i[1]
break
else:
g.es('Move to button parent not found, placing at top level')
parent = None
header = v.anyAtFileNodeName() or v.h # drop @auto etc.
text = txt + ":" + header if txt else header
# createButton truncates text.
if parent and g.app.gui.guiName() == "qt":
# see qtGui.py/class leoQtFrame/class qtIconBarClass/setCommandForButton
pb = parent.button
rc = QtGui.QAction(text, pb)
rc.connect(rc, QtCore.SIGNAL("triggered()"),
mb.moveCurrentNodeToTarget)
pb.insertAction(pb.actions()[0], rc) # insert at top
b = None
mb.has_parent = True
t = QtCore.QString(
c.config.getString('mod_scripting_subtext') or '')
if not unicode(pb.text()).endswith(unicode(t)):
pb.setText(pb.text() + t)
else:
b = sc.createIconButton(
text,
command=mb.moveCurrentNodeToTarget,
statusLine='Move current node to %s child of %s' %
(g.choose(first, 'first', 'last'), v.h),
bg="LightBlue")
if g.app.gui.guiName() == "qt":
def cb_goto_target(event=None, c=c, v=v):
p = c.vnode2position(v)
c.selectPosition(p)
c.redraw()
def cb_set_parent(event=None,
c=c,
v=v,
first=first,
type_=type_):
c.quickMove.set_parent(v, first, type_)
def cb_permanent(event=None,
c=c,
v=v,
type_=type_,
first=first):
c.quickMove.permanentButton(v=v, type_=type_, first=first)
# def cb_clear(event=None, c=c, v=v):
# c.quickMove.clearButton(v)
for cb, txt in [
(cb_goto_target, 'Goto target'),
(cb_permanent, 'Make permanent'),
# (cb_clear, 'Clear permanent'),
(cb_set_parent, 'Set parent'),
]:
but = b.button
rc = QtGui.QAction(txt, but)
rc.connect(rc, QtCore.SIGNAL("triggered()"), cb)
but.insertAction(but.actions()[-1],
rc) # insert rc before Remove Button
self.buttons.append((mb, b))
def add_yaml_function_node(self, sub_entry, folder, parentNode):
api = app.utils.load_yaml(sub_entry.filePath())
#print api
## TODO Qtify
if 'section' in api and api['section']:
section = api['section']
else:
section = "#"
#print api
is_fixed = 'parameters_type' in api and api[
'parameters_type'] == 'fixed'
if not is_fixed:
#print "foo"
s = api['function'] + "(*)"
funkFileItem = QtGui.QTreeWidgetItem(parentNode)
funkFileItem.setIcon(self.COLS.icon, Icon(Ico.Function))
funkFileItem.setData(self.COLS.icon, QtCore.Qt.UserRole,
sub_entry.fileName())
funkFileItem.setText(self.COLS.folder, folder)
font = funkFileItem.font(self.COLS.icon)
font.setBold(True)
funkFileItem.setFont(self.COLS.icon, font)
funkFileItem.setText(self.COLS.icon, s)
funkFileItem.setText(self.COLS.function, api['function'])
if len(api['parameters']) > 0:
#p_list = []
for ap in api['parameters']:
paraSyntax = QtGui.QTreeWidgetItem(funkFileItem)
paraSyntax.setIcon(self.COLS.icon, Icon(Ico.FunctionSub))
paraSyntax.setData(self.COLS.icon, QtCore.Qt.UserRole,
sub_entry.fileName())
font = funkFileItem.font(self.COLS.icon)
font.setBold(True)
paraSyntax.setFont(self.COLS.icon, font)
func_name = api['function']
if ap.keys()[0] == '':
s = func_name + "()"
else:
s = func_name + "( " + ap.keys()[0] + " )"
paraSyntax.setText(self.COLS.icon, s)
paraSyntax.setText(self.COLS.description, ap.values()[0])
paraSyntax.setText(self.COLS.function, api['function'])
paraSyntax.setText(self.COLS.folder, folder)
else:
funkFileItem = QtGui.QTreeWidgetItem(parentNode)
funkFileItem.setIcon(self.COLS.icon, Icon(Ico.Function))
#funkFileItem.setText(self.COLS.icon, sub_entry.fileName())
font = funkFileItem.font(self.COLS.icon)
font.setBold(True)
funkFileItem.setFont(self.COLS.icon, font)
#if 'syntax' in api:
# funkFileItem.setText(self.COLS.icon, api['syntax'])
ss = "<b><font color=#176087 >%s</font></b>" % api['function']
s = api['function']
if len(api['parameters']) > 0:
p_list = []
for ap in api['parameters']:
#sss = "<font color=blue><b>%s</b></font>" % ap.keys()[0]
sss = ap.keys()[0]
p_list.append(sss)
s += "( " + ", ".join(p_list) + " )"
#kidd = QtGui.QTreeWidgetItem(funkFileItem)
#kidd.setIcon(self.COLS.icon, Icon(Ico.Green))
else:
s += "()"
#s += " - <small>%s</small>" % api['summary']
funkFileItem.setText(self.COLS.icon, s)
#lbl = QtGui.QLabel(s, self.tree)
#lbl.setAutoFillBackground(True)
#self.tree.setItemWidget(funkFileItem, self.COLS.icon, lbl)
#kidd.setText(self.COLS.description, ap.values()[0])
#kidd.setData(self.COLS.icon, QtCore.Qt.UserRole, QtCore.QVariant(sub_entry.filePath()))
funkFileItem.setText(self.COLS.description, api['summary'])
funkFileItem.setText(self.COLS.function, api['function'])
funkFileItem.setText(self.COLS.folder, folder)
#funkFileItem.setText(self.COLS.section, section)
funkFileItem.setData(self.COLS.icon, QtCore.Qt.UserRole,
QtCore.QVariant(sub_entry.filePath()))
#self.tree.setItemExpanded(funkFileItem, True)
#print api['parameters']
if 1 == 0:
if len(api['parameters']) > 0: ##TODO Qt'ify python code
if 'parameters_type' in api and api[
'parameters_type'] == 'fixed':
for ap in api['parameters']:
kidd = QtGui.QTreeWidgetItem(funkFileItem)
kidd.setIcon(self.COLS.icon,
Icon(Ico.FunctionParam))
kidd.setText(self.COLS.icon, ap.keys()[0])
kidd.setText(self.COLS.description, ap.values()[0])
kidd.setData(self.COLS.icon, QtCore.Qt.UserRole,
QtCore.QVariant(sub_entry.filePath()))
if 'return' in api and api['return'] != '':
kidd = QtGui.QTreeWidgetItem(funkFileItem)
kidd.setIcon(self.COLS.icon, Icon(Ico.FunctionReturn))
lbl = QtCore.QString("Return: ").append(api['return'])
kidd.setText(self.COLS.icon, lbl)
kidd.setData(self.COLS.icon, QtCore.Qt.UserRole,
QtCore.QVariant(sub_entry.filePath()))
kidd.setFirstColumnSpanned(True)
def addInit(self,args=[]):
#Convert args into str
for i in range (len(args)):
args[i] = QtCore.QString(str(args[i]))
#Put the creautur summerty in the main display
for i in range(0,len(args),2):
if args[i].compare('name',False) == 0: self.creatureName = args[i+1]
if args[i].compare('init',False) == 0: self.creatureInit = args[i+1]
if args[i].compare('hp',False) == 0:self.creatureHP = args[i+1]
self.creatureInit = number_confirmer(val=self.creatureInit,minv=0)
self.creatureHP = number_confirmer(val=self.creatureHP,minv=0)
self.main_text.setText(make_creautre_summery(self.creatureName,
self.creatureInit,
self.creatureHP))
if self.creatureName == None:
# read creaure name
self.msg_line.setText('Creature name')
self.condition = self.READNAME
return
if self.creatureInit == None:
# read creature initaitve value
self.msg_line.setText('Creature initiative')
self.condition = self.READINIT
return
if self.creatureHP == None:
# read creature hp value
self.msg_line.setText('Creature HP')
self.condition = self.READHP
return
#Add to the init label, we need to rearange the labels
for ilabel in self.init_labels:
if ilabel.init_round == -1:
#Reached the end of the init list, append
ilabel.setInitText(self.creatureName,
self.creatureInit,
self.creatureHP)
#Increase creature count. This will only be reached once
self.creatureCount += 1
break
if ilabel.init_round < self.creatureInit:
#Found somebody that acts later, switch
nname = ilabel.name
ninit = ilabel.init_round
nhp = ilabel.hp
ilabel.setInitText(self.creatureName,
self.creatureInit,
self.creatureHP)
self.creatureName = nname
self.creatureInit = ninit
self.creatureHP = nhp
self.addInit()
break
#no reading data from user past this line
#initializing the marker if there is none
if self.cur_init < 0:
self.cur_init = 0
self.init_labels[0].setStyleSheet(self.cur_init_color)
self.resetCondition()
return
def slide_data_rate(self, data_rate):
bit_data_rate = (int)((data_rate / 100.) * (self.frame_length) *
self.symbol_time / (self.frame_length - 3))
self.gui.lineEditDataRate.setText(
QtCore.QString("%1").number(data_rate / 100.))
self.rpc_mgr_tx.request("set_data_rate", [bit_data_rate])
def __init__(self, figura, parent = None):
QMainWindow.__init__(self, parent)
self.figura = figura
self.setWindowTitle(u'Exportar video...')
self.setAttribute(QtCore.Qt.WA_DeleteOnClose)
self.setGeometry(0, 0, 370, 261)
self.setMinimumSize(370, 261)
#self.setMaximumSize(370, 261)
self.setWindowTitle(QtCore.QString(u'Exportar gráficas a video...'))
vbox = QVBoxLayout()
#Groupbox
gb = QGroupBox(QtCore.QString('Opciones de video'), self)
gb.setGeometry(10, 10, 351, 201)
vbox.addWidget(gb)
#Labels
l1 = QLabel(QtCore.QString('Nombre:'), gb)
l1.setGeometry(20, 30, 46, 13)
#self.addWidget(l1)
l2 = QLabel(QtCore.QString('Alto:'), gb)
l2.setGeometry(20, 60, 46, 13)
#self.addWidget(l2)
l3 = QLabel(QtCore.QString('Ancho:'), gb)
l3.setGeometry(20, 90, 46, 13)
#self.addWidget(l3)
l4 = QLabel(QtCore.QString('Cuadros por segundo (FPS):'), gb)
l4.setGeometry(20, 120, 136, 13)
l4.setToolTip(u'Cantidad de cuadros mostrados por cada segundo de reproducción')
#self.addWidget(l4)
l5 = QLabel(QtCore.QString('Directorio destino:'), gb)
l5.setGeometry(20, 150, 88, 13)
#self.addWidget(l5)
#TextBoxes
self.tb1 = QLineEdit(QtCore.QString('video'), gb)
self.tb1.setGeometry(200, 30, 133, 20)
self.tb1.setToolTip(u'Nombre del video')
#self.addWidget(tb1)
self.tb2 = QLineEdit(QtCore.QString('25'), gb)
self.tb2.setGeometry(200, 120, 133, 20)
self.tb2.setToolTip(u'Cantidad de cuadros mostrados por cada segundo de reproducción')
#self.addWidget(tb2)
## print 'dir: ' + os.path.realpath('videos')
## print 'dir?: ' + str(os.path.isdir('videos'))
self.tb3 = QLineEdit(QtCore.QString(os.path.realpath('videos')), gb)
self.tb3.setReadOnly(True)
self.tb3.setGeometry(200, 150, 91, 20)
self.tb3.setToolTip(u'Ingrese la localización final del video,si deja default, se creará el video en el directorio videos de la aplicación')
#self.addWidget(tb3)
self.sb2 = QSpinBox(gb)
self.sb2.setMaximum(800)
self.sb2.setValue(800)
self.sb2.setGeometry(200, 60, 133, 20)
self.sb2.setToolTip(u'Ancho del video')
QtCore.QObject.connect(self.sb2, QtCore.SIGNAL("valueChanged(int)"), self.validatorw)
#self.addWidget(sb2)
self.sb1 = QSpinBox(gb)
self.sb1.setMaximum(600)
self.sb1.setValue(600)
self.sb1.setGeometry(200, 90, 133, 20)
self.sb1.setToolTip(u'Alto del video')
QtCore.QObject.connect(self.sb1, QtCore.SIGNAL("valueChanged(int)"), self.validatorh)
#self.addWidget(sb1)
#PushButtons
pb1 = QPushButton(QtCore.QString('...'), gb)
pb1.setToolTip(u'Presione este botón para indicar la localización del video.')
pb1.setGeometry(300, 150, 31, 20)
QtCore.QObject.connect(pb1, QtCore.SIGNAL("clicked()"), self.dir)
#self.addWidget(pb1)
self.pb2 = QPushButton(QtCore.QString('Aceptar'), self)
self.pb2.setGeometry(10, 220, 75, 23)
#vbox.addWidget(self.pb2)
QtCore.QObject.connect(self.pb2, QtCore.SIGNAL("clicked()"), self.salvar)
self.pb3 = QPushButton(QtCore.QString('Cancelar'), self)
self.pb3.setGeometry(280, 220, 75, 23)
QtCore.QObject.connect(self.pb3, QtCore.SIGNAL("clicked()"), self.close)
#vbox.addWidget(self.pb3)
self.setLayout(vbox)
def load_xml(self, fs_filename):
"""
load xml airspace file
"""
# check input
# assert f_model
# read coordinates
ls_filename = ":/data/" + fs_filename + ".xml"
l_data_file = QtCore.QFile(ls_filename)
assert l_data_file is not None
l_data_file.open(QtCore.QIODevice.ReadOnly)
if not l_data_file.isOpen():
# logger
l_log = logging.getLogger("airspace::load_xml")
l_log.setLevel(logging.NOTSET)
l_log.fatal("<E01: failed to open {}".format(ls_filename))
# abend
sys.exit(1)
l_xml_doc = QtXml.QDomDocument("airspace")
assert l_xml_doc is not None
if not l_xml_doc.setContent(l_data_file):
l_data_file.close()
# logger
l_log = logging.getLogger("airspace::load_xml")
l_log.setLevel(logging.NOTSET)
l_log.fatal("<E02: failed to parse {}".format(ls_filename))
# abend
sys.exit(1)
l_data_file.close()
l_doc_elem = l_xml_doc.documentElement()
assert l_doc_elem is not None
self.__f_variation, lv_ok = l_doc_elem.attribute(
QtCore.QString("variation"), QtCore.QString("0")).toDouble()
self.__f_elevation, lv_ok = l_doc_elem.attribute(
QtCore.QString("elevation"), QtCore.QString("0")).toDouble()
l_node = l_doc_elem.firstChild()
assert l_node is not None
while not l_node.isNull():
l_element = l_node.toElement()
assert l_element is not None
if not l_element.isNull():
self.__parse_dom_element(l_element)
l_node = l_node.nextSibling()
assert l_node is not None
def set_time_offset(self, to):
self.gui.timeEdit.setText(QtCore.QString("%1").arg(to))