def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1,l2)
# if code comes from file
if "\\inputminted" in line:
block_begin = lisp.point()
lisp.message(line)
py_file = re.search("\{python\}\{(.*?)\}", line).groups(1)[0]
# get code content from file
curr_dir = os.path.dirname(lisp.buffer_file_name())
content = open(curr_dir + "/" + py_file).read()
block_end = l2 # end of block happens to be end of include file line
lisp.goto_char(remember_where)
else:
# get code content from latex
block_begin,block_end,content = get_block_content("\\begin{minted}","\\end{minted}")
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = get_buffer_content_prev(block_begin)
plt_count_before = len(re.findall('plt\.savefig\(',bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before+1))
rpl = "plt.hold(False)\nplt.savefig('%s')\nplt.hold(False)" % f
show_replaced = True if "plt.show()" in content else False
content=content.replace("plt.show()",rpl)
include_graphics_command = "\\includegraphics[height=6cm]{%s}" % f
#(ip) = get_kernel_pointer(lisp.buffer_name())
start = time.time()
with capture_output() as io:
res_code = ip.run_cell(content)
res = io.stdout
elapsed = (time.time() - start)
display_results(block_end, res) # display it
# generate includegraphics command
if show_replaced:
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert(include_graphics_command + '\n')
lisp.scroll_up(1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()",rpl,None,block_begin,block_end)
lisp.goto_char(remember_where)
if "plt.savefig" in content: lisp.preview_buffer()
lisp.message("Ran in " + str(elapsed) + " seconds")
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1, l2)
# if code comes from file
if "\\inputminted" in line:
block_begin = lisp.point()
lisp.message(line)
py_file = re.search("\{python\}\{(.*?)\}", line).groups(1)[0]
# get code content from file
curr_dir = os.path.dirname(lisp.buffer_file_name())
content = open(curr_dir + "/" + py_file).read()
block_end = l2 # end of block happens to be end of include file line
lisp.goto_char(remember_where)
else:
# get code content from latex
block_begin, block_end, content = get_block_content(
"\\begin{minted}", "\\end{minted}")
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = lisp.buffer_string()
plt_count_before = len(re.findall('plt\.savefig\(', bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before + 1))
rpl = "plt.savefig('%s')" % f
show_replaced = True if "plt.show()" in content else False
content = content.replace("plt.show()", rpl)
content = "plt.figure()\n" + content
include_graphics_command = "\\includegraphics[height=6cm]{%s}" % f
#(ip) = get_kernel_pointer(lisp.buffer_name())
start = time.time()
with capture_output() as io:
res_code = get_ip().run_cell(content)
res = io.stdout
elapsed = (time.time() - start)
display_results(block_end, res) # display it
# generate includegraphics command
if show_replaced:
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert(include_graphics_command + '\n')
lisp.scroll_up(1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()", rpl, None, block_begin, block_end)
lisp.goto_char(remember_where)
if "plt.savefig" in content: lisp.preview_buffer()
lisp.message("Ran in " + str(elapsed) + " seconds")
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1, l2)
# if code comes from file
if "\\inputminted" in line:
lisp.message(line)
py_file = re.search("\{python\}\{(.*?)\}", line).groups(1)[0]
# get code content from file
curr_dir = os.path.dirname(lisp.buffer_file_name())
content = open(curr_dir + "/" + py_file).read()
block_end = l2 # end of block happens to be end of include file line
lisp.goto_char(remember_where)
else:
# get code content from latex
block_begin, block_end, content = get_block_content(
"\\begin{minted}", "\\end{minted}")
#lisp.message(content)
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = get_buffer_content_prev(block_begin)
plt_count_before = len(re.findall('plt\.savefig\(', bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before + 1))
rpl = "plt.savefig('%s')" % f
show_replaced = True if "plt.show()" in content else False
content = content.replace("plt.show()", rpl)
include_graphics_command = "\\includegraphics[height=6cm]{%s}" % f
(kc, kernel, ip) = get_kernel_pointer(lisp.buffer_name())
start = time.time()
res = ''
with capture_output() as io:
ip.run_cell(content)
res = io.stdout
if kernel.shell.last_known_outflag:
etype, value, tb = kernel.shell._get_exc_info()
res = str(etype) + " " + str(value) + "\n"
elapsed = (time.time() - start)
# replace this unnecessary message so output becomes blank
if res and len(res) > 0: # if result not empty
res = res.replace(
"Populating the interactive namespace from numpy and matplotlib\n",
"")
display_results(block_end, res) # display it
else:
display_results(block_end, "")
lisp.goto_char(block_end)
# generate includegraphics command
if show_replaced:
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert(include_graphics_command + '\n')
lisp.backward_line_nomark(
1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()", rpl, None, block_begin, block_end)
lisp.goto_char(remember_where)
if "plt.savefig" in content: lisp.preview_buffer()
lisp.message("Ran in " + str(elapsed) + " seconds")
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1,l2)
block_begin,block_end,content = get_block_content("```python","```")
#lisp.message(content)
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = get_buffer_content_prev(block_begin)
plt_count_before = len(re.findall('plt\.savefig\(',bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before+1))
rpl = "plt.savefig('%s')" % f
show_replaced = True if "plt.show()" in content else False
content=content.replace("plt.show()",rpl)
include_graphics_command = "" % f
(kc,kernel,ip) = get_kernel_pointer(lisp.buffer_name())
start = time.time()
res = ''
with capture_output() as io:
ip.run_cell(content)
res = io.stdout
if kernel.shell.last_known_outflag:
etype, value, tb = kernel.shell._get_exc_info()
res = str(etype) + " " + str(value) + "\n"
elapsed = (time.time() - start)
# replace this unnecessary message so output becomes blank
if res and len(res) > 0: # if result not empty
res = res.replace("Populating the interactive namespace from numpy and matplotlib\n","")
display_results(block_end, res) # display it
else:
display_results(block_end, "")
lisp.goto_char(block_end)
# generate includegraphics command
if show_replaced:
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert(include_graphics_command + '\n')
#lisp.backward_line_nomark(1) # skip over end verbatim, leave one line emtpy
lisp.scroll_up(1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()",rpl,None,block_begin,block_end)
lisp.goto_char(remember_where)
if "plt.savefig" in content: lisp.preview_buffer()
lisp.message("Ran in " + str(elapsed) + " seconds")