class TonePlayer(QObject):
changed = Signal()
def getStateLabel(self):
print "Getting"
return self._label
def setStateLabel(self, value):
print "Setting", value
self._label = value
self.changed.emit()
stateLabel = Property(str, getStateLabel, setStateLabel, notify=changed)
def __init__(self, devices=None, filename=None, parent=None):
QObject.__init__(self, parent)
self.pullTimer = QTimer(self)
self.buf = QByteArray()
self.devices = devices
self.device = QAudioDeviceInfo.defaultOutputDevice()
self.generator = None
self.audioOutput = None
self.output = None
self.fmt = QAudioFormat()
self.pullMode = False
self.dump = filename
self._label = SUSPEND_LABEL
self.initializeAudio()
def initializeAudio(self):
self.pullTimer.timeout.connect(self.pullTimerExpired)
self.pullMode = True
self.fmt.setFrequency(DATA_FREQUENCY_HZ)
self.fmt.setChannels(1)
self.fmt.setSampleSize(16)
self.fmt.setCodec('audio/pcm')
self.fmt.setByteOrder(QAudioFormat.LittleEndian)
self.fmt.setSampleType(QAudioFormat.SignedInt)
info = QAudioDeviceInfo(QAudioDeviceInfo.defaultOutputDevice())
if not info.isFormatSupported(self.fmt):
print 'Default format not supported - trying to use nearest'
self.fmt = info.nearestFormat(self.fmt)
self.generator = Generator(self.fmt, DURATION_SECONDS * 1000000,
TONE_FREQUENCY_HZ, self, self.dump)
self.createAudioOutput()
def createAudioOutput(self):
self.audioOutput = QAudioOutput(self.device, self.fmt, self)
self.audioOutput.notify.connect(self.notified)
self.audioOutput.stateChanged.connect(self.stateChanged)
self.generator.start()
self.audioOutput.start(self.generator)
@Slot()
def toggleSuspendResume(self):
if self.audioOutput.state() == QAudio.SuspendedState:
print 'Status: Suspended, resuming'
self.audioOutput.resume()
self.stateLabel = SUSPEND_LABEL
elif self.audioOutput.state() == QAudio.ActiveState:
print 'Status: Active, suspending'
self.audioOutput.suspend()
self.stateLabel = RESUME_LABEL
elif self.audioOutput.state() == QAudio.StoppedState:
print 'Status: Stopped, resuming'
self.audioOutput.resume()
self.stateLabel = SUSPEND_LABEL
elif self.audioOutput.state() == QAudio.IdleState:
print 'Status: Idle'
playbackResumed = Signal()
@Slot()
def toggleMode(self):
self.pullTimer.stop()
self.audioOutput.stop()
if self.pullMode:
print "Enabling push mode"
self.output = self.audioOutput.start()
self.pullMode = False
self.pullTimer.start(5)
else:
print "Enabling pull mode"
self.pullMode = True
self.audioOutput.start(self.generator)
self.playbackResumed.emit()
@Slot(int)
def deviceChanged(self, index):
print "Device changed: index:", index
print "Selected device name: ", self.devices[index].deviceName()
self.pullTimer.stop()
self.generator.stop()
self.audioOutput.stop()
self.audioOutput.disconnect(self)
self.device = self.devices[index]
self.createAudioOutput()
def stateChanged(self, state):
print 'State changed: ', state
def notified(self):
print 'Bytes free %d, elapsed usecs %d, processed usecs %d' % (
self.audioOutput.bytesFree(), self.audioOutput.elapsedUSecs(),
self.audioOutput.processedUSecs())
def pullTimerExpired(self):
if self.audioOutput.state() != QAudio.StoppedState:
chunks = self.audioOutput.bytesFree(
) / self.audioOutput.periodSize()
while chunks:
data = self.generator.read(self.audioOutput.periodSize())
self.output.write(data)
if len(data) != self.audioOutput.periodSize():
break
chunks -= 1
def createAudioOutput(self):
self.audioOutput = QAudioOutput(self.device, self.fmt, self)
self.audioOutput.notify.connect(self.notified)
self.audioOutput.stateChanged.connect(self.stateChanged)
self.generator.start()
self.audioOutput.start(self.generator)
class AudioTest(QMainWindow):
def __init__(self, filename=None):
QMainWindow.__init__(self)
self.pullTimer = QTimer(self)
# Owned by layout
self.modeButton = None
self.suspendResumeButton = None
self.deviceBox = None
self.device = QAudioDeviceInfo.defaultOutputDevice()
self.generator = None
self.audioOutput = None
self.output = None
self.fmt = QAudioFormat()
self.pullMode = False
self.buf = QByteArray(BUFFER_SIZE, 0)
self.dump = filename
self.initializeWindow()
self.initializeAudio()
def initializeWindow(self):
window = QWidget()
layout = QVBoxLayout()
self.deviceBox = QComboBox(self)
for info in QAudioDeviceInfo.availableDevices(QAudio.AudioOutput):
self.deviceBox.addItem(info.deviceName(), info)
self.deviceBox.activated[int].connect(self.deviceChanged)
layout.addWidget(self.deviceBox)
self.modeButton = QPushButton(self)
self.modeButton.setText(PUSH_MODE_LABEL)
self.modeButton.clicked.connect(self.toggleMode)
layout.addWidget(self.modeButton)
self.suspendResumeButton = QPushButton(self)
self.suspendResumeButton.setText(SUSPEND_LABEL)
self.suspendResumeButton.clicked.connect(self.toggleSuspendResume)
layout.addWidget(self.suspendResumeButton)
window.setLayout(layout)
self.setCentralWidget(window)
window.show()
def initializeAudio(self):
self.pullTimer.timeout.connect(self.pullTimerExpired)
self.pullMode = True
self.fmt.setFrequency(DATA_FREQUENCY_HZ)
self.fmt.setChannels(1)
self.fmt.setSampleSize(16)
self.fmt.setCodec('audio/pcm')
self.fmt.setByteOrder(QAudioFormat.LittleEndian)
self.fmt.setSampleType(QAudioFormat.SignedInt)
info = QAudioDeviceInfo(QAudioDeviceInfo.defaultOutputDevice())
if not info.isFormatSupported(self.fmt):
print 'Default format not supported - trying to use nearest'
self.fmt = info.nearestFormat(self.fmt)
self.generator = Generator(self.fmt, DURATION_SECONDS * 1000000,
TONE_FREQUENCY_HZ, self, self.dump)
self.createAudioOutput()
def createAudioOutput(self):
self.audioOutput = QAudioOutput(self.device, self.fmt, self)
self.audioOutput.notify.connect(self.notified)
self.audioOutput.stateChanged.connect(self.stateChanged)
self.generator.start()
self.audioOutput.start(self.generator)
# Slots
def notified(self):
print 'Bytes free %d, elapsed usecs %d, processed usecs %d' % (
self.audioOutput.bytesFree(),
self.audioOutput.elapsedUSecs(),
self.audioOutput.processedUSecs())
def pullTimerExpired(self):
if self.audioOutput.state() != QAudio.StoppedState:
chunks = self.audioOutput.bytesFree() / self.audioOutput.periodSize()
while chunks:
data = self.generator.read(self.audioOutput.periodSize())
self.output.write(data)
if len(data) != self.audioOutput.periodSize():
break
chunks -= 1
def toggleMode(self):
self.pullTimer.stop()
self.audioOutput.stop()
if self.pullMode:
self.modeButton.setText(PULL_MODE_LABEL)
self.output = self.audioOutput.start()
self.pullMode = False
self.pullTimer.start(5)
else:
self.modeButton.setText(PUSH_MODE_LABEL)
self.pullMode = True
self.audioOutput.start(self.generator)
self.suspendResumeButton.setText(SUSPEND_LABEL)
def toggleSuspendResume(self):
if self.audioOutput.state() == QAudio.SuspendedState:
print 'Status: Suspended, resuming'
self.audioOutput.resume()
self.suspendResumeButton.setText(SUSPEND_LABEL)
elif self.audioOutput.state() == QAudio.ActiveState:
print 'Status: Active, suspending'
self.audioOutput.suspend()
self.suspendResumeButton.setText(RESUME_LABEL)
elif self.audioOutput.state() == QAudio.StoppedState:
print 'Status: Stopped, resuming'
self.audioOutput.resume()
self.suspendResumeButton.setText(SUSPEND_LABEL)
elif self.audioOutput.state() == QAudio.IdleState:
print 'Status: Idle'
def stateChanged(self, state):
print 'State changed: ', state
def deviceChanged(self, index):
self.pullTimer.stop()
self.generator.stop()
self.audioOutput.stop()
self.audioOutput.disconnect(self)
self.device = self.deviceBox.itemData(index)
self.createAudioOutput()
def createAudioOutput(self):
self.audioOutput = QAudioOutput(self.device, self.fmt, self)
self.audioOutput.notify.connect(self.notified)
self.audioOutput.stateChanged.connect(self.stateChanged)
self.generator.start()
self.audioOutput.start(self.generator)
class TonePlayer(QObject):
changed = Signal()
def getStateLabel(self):
print "Getting"
return self._label
def setStateLabel(self, value):
print "Setting", value
self._label = value
self.changed.emit()
stateLabel = Property(str, getStateLabel, setStateLabel, notify=changed)
def __init__(self, devices=None, filename=None, parent=None):
QObject.__init__(self, parent)
self.pullTimer = QTimer(self)
self.buf = QByteArray()
self.devices = devices
self.device = QAudioDeviceInfo.defaultOutputDevice()
self.generator = None
self.audioOutput = None
self.output = None
self.fmt = QAudioFormat()
self.pullMode = False
self.dump = filename
self._label = SUSPEND_LABEL
self.initializeAudio()
def initializeAudio(self):
self.pullTimer.timeout.connect(self.pullTimerExpired)
self.pullMode = True
self.fmt.setFrequency(DATA_FREQUENCY_HZ)
self.fmt.setChannels(1)
self.fmt.setSampleSize(16)
self.fmt.setCodec("audio/pcm")
self.fmt.setByteOrder(QAudioFormat.LittleEndian)
self.fmt.setSampleType(QAudioFormat.SignedInt)
info = QAudioDeviceInfo(QAudioDeviceInfo.defaultOutputDevice())
if not info.isFormatSupported(self.fmt):
print "Default format not supported - trying to use nearest"
self.fmt = info.nearestFormat(self.fmt)
self.generator = Generator(self.fmt, DURATION_SECONDS * 1000000, TONE_FREQUENCY_HZ, self, self.dump)
self.createAudioOutput()
def createAudioOutput(self):
self.audioOutput = QAudioOutput(self.device, self.fmt, self)
self.audioOutput.notify.connect(self.notified)
self.audioOutput.stateChanged.connect(self.stateChanged)
self.generator.start()
self.audioOutput.start(self.generator)
@Slot()
def toggleSuspendResume(self):
if self.audioOutput.state() == QAudio.SuspendedState:
print "Status: Suspended, resuming"
self.audioOutput.resume()
self.stateLabel = SUSPEND_LABEL
elif self.audioOutput.state() == QAudio.ActiveState:
print "Status: Active, suspending"
self.audioOutput.suspend()
self.stateLabel = RESUME_LABEL
elif self.audioOutput.state() == QAudio.StoppedState:
print "Status: Stopped, resuming"
self.audioOutput.resume()
self.stateLabel = SUSPEND_LABEL
elif self.audioOutput.state() == QAudio.IdleState:
print "Status: Idle"
playbackResumed = Signal()
@Slot()
def toggleMode(self):
self.pullTimer.stop()
self.audioOutput.stop()
if self.pullMode:
print "Enabling push mode"
self.output = self.audioOutput.start()
self.pullMode = False
self.pullTimer.start(5)
else:
print "Enabling pull mode"
self.pullMode = True
self.audioOutput.start(self.generator)
self.playbackResumed.emit()
@Slot(int)
def deviceChanged(self, index):
print "Device changed: index:", index
print "Selected device name: ", self.devices[index].deviceName()
self.pullTimer.stop()
self.generator.stop()
self.audioOutput.stop()
self.audioOutput.disconnect(self)
self.device = self.devices[index]
self.createAudioOutput()
def stateChanged(self, state):
print "State changed: ", state
def notified(self):
print "Bytes free %d, elapsed usecs %d, processed usecs %d" % (
self.audioOutput.bytesFree(),
self.audioOutput.elapsedUSecs(),
self.audioOutput.processedUSecs(),
)
def pullTimerExpired(self):
if self.audioOutput.state() != QAudio.StoppedState:
chunks = self.audioOutput.bytesFree() / self.audioOutput.periodSize()
while chunks:
data = self.generator.read(self.audioOutput.periodSize())
self.output.write(data)
if len(data) != self.audioOutput.periodSize():
break
chunks -= 1
