def applySubstructure( process, postfix="" ) :
task = getPatAlgosToolsTask(process)
from PhysicsTools.PatAlgos.tools.jetTools import addJetCollection
from PhysicsTools.PatAlgos.producersLayer1.jetProducer_cfi import _patJets as patJetsDefault
# Configure the RECO jets
from RecoJets.JetProducers.ak8PFJets_cfi import ak8PFJetsPuppi, ak8PFJetsPuppiSoftDrop, ak8PFJetsPuppiConstituents
setattr(process,'ak8PFJetsPuppi'+postfix,ak8PFJetsPuppi.clone())
setattr(process,'ak8PFJetsPuppiConstituents'+postfix, ak8PFJetsPuppiConstituents.clone(cut = cms.string('pt > 170.0 && abs(rapidity()) < 2.4') ))
setattr(process,'ak8PFJetsPuppiSoftDrop'+postfix, ak8PFJetsPuppiSoftDrop.clone( src = 'ak8PFJetsPuppiConstituents'+postfix+':constituents' ))
from RecoJets.JetProducers.ak8PFJetsPuppi_groomingValueMaps_cfi import ak8PFJetsPuppiSoftDropMass
setattr(process,'ak8PFJetsPuppiSoftDropMass'+postfix, ak8PFJetsPuppiSoftDropMass.clone())
from Configuration.Eras.Modifier_run2_miniAOD_80XLegacy_cff import run2_miniAOD_80XLegacy
from Configuration.Eras.Modifier_run2_miniAOD_94XFall17_cff import run2_miniAOD_94XFall17
from Configuration.ProcessModifiers.run2_miniAOD_UL_cff import run2_miniAOD_UL
_run2_miniAOD_ANY = (run2_miniAOD_80XLegacy | run2_miniAOD_94XFall17 | run2_miniAOD_UL)
from Configuration.Eras.Modifier_pA_2016_cff import pA_2016
from Configuration.ProcessModifiers.pp_on_AA_cff import pp_on_AA
if postfix=='':
# Avoid recomputing the PUPPI collections that are present in AOD
_rerun_puppijets_task = task.copy()
_rerun_puppijets_task.add(getattr(process,'ak8PFJetsPuppi'),
getattr(process,'ak8PFJetsPuppiConstituents'),
getattr(process,'ak8PFJetsPuppiSoftDrop'),
getattr(process,'ak8PFJetsPuppiSoftDropMass'))
(_run2_miniAOD_ANY | pA_2016 | pp_on_AA).toReplaceWith(task, _rerun_puppijets_task)
else:
task.add(getattr(process,'ak8PFJetsPuppi'+postfix),
getattr(process,'ak8PFJetsPuppiConstituents'+postfix),
getattr(process,'ak8PFJetsPuppiSoftDrop'+postfix),
getattr(process,'ak8PFJetsPuppiSoftDropMass'+postfix))
from RecoJets.JetProducers.ak8GenJets_cfi import ak8GenJets, ak8GenJetsSoftDrop, ak8GenJetsConstituents
addToProcessAndTask('ak8GenJetsNoNuConstituents'+postfix, ak8GenJetsConstituents.clone(src='ak8GenJetsNoNu'), process, task )
addToProcessAndTask('ak8GenJetsNoNuSoftDrop'+postfix,ak8GenJetsSoftDrop.clone(src=cms.InputTag('ak8GenJetsNoNuConstituents'+postfix, 'constituents')),process,task)
addToProcessAndTask('slimmedGenJetsAK8SoftDropSubJets'+postfix,
cms.EDProducer("PATGenJetSlimmer",
src = cms.InputTag("ak8GenJetsNoNuSoftDrop"+postfix, "SubJets"),
packedGenParticles = cms.InputTag("packedGenParticles"),
cut = cms.string(""),
cutLoose = cms.string(""),
nLoose = cms.uint32(0),
clearDaughters = cms.bool(False), #False means rekeying
dropSpecific = cms.bool(True), # Save space
), process, task )
pp_on_AA.toModify( getattr(process,'slimmedGenJetsAK8SoftDropSubJets'), cut = 'pt<0', nLoose = 0)
## PATify puppi soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName = 'AK8PFPuppiSoftDrop' + postfix,
jetSource = cms.InputTag('ak8PFJetsPuppiSoftDrop'+postfix),
btagDiscriminators = ['None'],
genJetCollection = cms.InputTag('slimmedGenJetsAK8'),
jetCorrections = ('AK8PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
getJetMCFlavour = False # jet flavor disabled
)
## PATify soft drop subjets
addJetCollection(
process,
postfix=postfix,
labelName = 'AK8PFPuppiSoftDropSubjets',
jetSource = cms.InputTag('ak8PFJetsPuppiSoftDrop'+postfix,'SubJets'),
algo = 'ak', # needed for subjet flavor clustering
rParam = 0.8, # needed for subjet flavor clustering
btagDiscriminators = ['pfDeepCSVJetTags:probb', 'pfDeepCSVJetTags:probbb', 'pfCombinedInclusiveSecondaryVertexV2BJetTags','pfCombinedMVAV2BJetTags'],
jetCorrections = ('AK4PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
explicitJTA = True, # needed for subjet b tagging
svClustering = True, # needed for subjet b tagging
genJetCollection = cms.InputTag('slimmedGenJetsAK8SoftDropSubJets'),
fatJets=cms.InputTag('ak8PFJetsPuppi'), # needed for subjet flavor clustering
groomedFatJets=cms.InputTag('ak8PFJetsPuppiSoftDrop') # needed for subjet flavor clustering
)
# add groomed ECFs and N-subjettiness to soft dropped pat::Jets for fat jets and subjets
process.load('RecoJets.JetProducers.ECF_cff')
addToProcessAndTask('nb1AK8PuppiSoftDrop'+postfix, process.ecfNbeta1.clone(src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix), cuts = cms.vstring('', '', 'pt > 250')), process, task)
addToProcessAndTask('nb2AK8PuppiSoftDrop'+postfix, process.ecfNbeta2.clone(src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix), cuts = cms.vstring('', '', 'pt > 250')), process, task)
#too slow now ==> disable
from Configuration.Eras.Modifier_pp_on_XeXe_2017_cff import pp_on_XeXe_2017
from Configuration.Eras.Modifier_phase2_common_cff import phase2_common
for e in [pp_on_XeXe_2017, pp_on_AA, phase2_common]:
e.toModify(getattr(process,'nb1AK8PuppiSoftDrop'+postfix), cuts = ['pt > 999999', 'pt > 999999', 'pt > 999999'] )
e.toModify(getattr(process,'nb2AK8PuppiSoftDrop'+postfix), cuts = ['pt > 999999', 'pt > 999999', 'pt > 999999'] )
from RecoJets.JetProducers.nJettinessAdder_cfi import Njettiness
addToProcessAndTask('NjettinessAK8Subjets'+postfix, Njettiness.clone(), process, task)
getattr(process,"NjettinessAK8Subjets"+postfix).src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix, "SubJets")
getattr(process,"patJetsAK8PFPuppiSoftDrop").userData.userFloats.src += ['nb1AK8PuppiSoftDrop'+postfix+':ecfN2','nb1AK8PuppiSoftDrop'+postfix+':ecfN3']
getattr(process,"patJetsAK8PFPuppiSoftDrop").userData.userFloats.src += ['nb2AK8PuppiSoftDrop'+postfix+':ecfN2','nb2AK8PuppiSoftDrop'+postfix+':ecfN3']
addToProcessAndTask('nb1AK8PuppiSoftDropSubjets'+postfix, process.ecfNbeta1.clone(src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix, "SubJets")), process, task)
addToProcessAndTask('nb2AK8PuppiSoftDropSubjets'+postfix, process.ecfNbeta2.clone(src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix, "SubJets")), process, task)
getattr(process,"patJetsAK8PFPuppiSoftDropSubjets"+postfix).userData.userFloats.src += ['nb1AK8PuppiSoftDropSubjets'+postfix+':ecfN2','nb1AK8PuppiSoftDropSubjets'+postfix+':ecfN3']
getattr(process,"patJetsAK8PFPuppiSoftDropSubjets"+postfix).userData.userFloats.src += ['nb2AK8PuppiSoftDropSubjets'+postfix+':ecfN2','nb2AK8PuppiSoftDropSubjets'+postfix+':ecfN3']
getattr(process,"patJetsAK8PFPuppiSoftDropSubjets"+postfix).userData.userFloats.src += ['NjettinessAK8Subjets'+postfix+':tau1','NjettinessAK8Subjets'+postfix+':tau2','NjettinessAK8Subjets'+postfix+':tau3','NjettinessAK8Subjets'+postfix+':tau4']
for e in [pp_on_XeXe_2017, pp_on_AA, phase2_common]:
e.toModify(getattr(process,'nb1AK8PuppiSoftDropSubjets'+postfix), cuts = ['pt > 999999', 'pt > 999999', 'pt > 999999'] )
e.toModify(getattr(process,'nb2AK8PuppiSoftDropSubjets'+postfix), cuts = ['pt > 999999', 'pt > 999999', 'pt > 999999'] )
# Patify AK8 PF PUPPI
addJetCollection(process, postfix=postfix, labelName = 'AK8Puppi',
jetSource = cms.InputTag('ak8PFJetsPuppi'+postfix),
algo= 'AK', rParam = 0.8,
jetCorrections = ('AK8PFPuppi', cms.vstring(['L2Relative', 'L3Absolute']), 'None'),
btagDiscriminators = ([
'pfCombinedSecondaryVertexV2BJetTags',
'pfCombinedInclusiveSecondaryVertexV2BJetTags',
'pfCombinedMVAV2BJetTags',
'pfDeepCSVJetTags:probb',
'pfDeepCSVJetTags:probc',
'pfDeepCSVJetTags:probudsg',
'pfDeepCSVJetTags:probbb',
'pfBoostedDoubleSecondaryVertexAK8BJetTags']),
genJetCollection = cms.InputTag('slimmedGenJetsAK8')
)
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src = [] # start with empty list of user floats
getattr(process,"selectedPatJetsAK8Puppi"+postfix).cut = cms.string("pt > 100")
getattr(process,"selectedPatJetsAK8Puppi"+postfix).cutLoose = cms.string("pt > 30")
getattr(process,"selectedPatJetsAK8Puppi"+postfix).nLoose = cms.uint32(3)
from RecoJets.JetAssociationProducers.j2tParametersVX_cfi import j2tParametersVX
addToProcessAndTask('ak8PFJetsPuppiTracksAssociatorAtVertex'+postfix, cms.EDProducer("JetTracksAssociatorAtVertex",
j2tParametersVX.clone( coneSize = cms.double(0.8) ),
jets = cms.InputTag("ak8PFJetsPuppi") ),
process, task)
addToProcessAndTask('patJetAK8PuppiCharge'+postfix, cms.EDProducer("JetChargeProducer",
src = cms.InputTag("ak8PFJetsPuppiTracksAssociatorAtVertex"),
var = cms.string('Pt'),
exp = cms.double(1.0) ),
process, task)
## now add AK8 groomed masses and ECF
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src += ['ak8PFJetsPuppiSoftDropMass'+postfix]
getattr(process,"patJetsAK8Puppi"+postfix).addTagInfos = cms.bool(False)
# add PUPPI Njetiness
addToProcessAndTask('NjettinessAK8Puppi'+postfix, Njettiness.clone(), process, task)
getattr(process,"NjettinessAK8Puppi"+postfix).src = cms.InputTag("ak8PFJetsPuppi"+postfix)
getattr(process,"patJetsAK8Puppi").userData.userFloats.src += ['NjettinessAK8Puppi'+postfix+':tau1','NjettinessAK8Puppi'+postfix+':tau2','NjettinessAK8Puppi'+postfix+':tau3','NjettinessAK8Puppi'+postfix+':tau4']
addToProcessAndTask("slimmedJetsAK8PFPuppiSoftDropSubjets"+postfix,
cms.EDProducer("PATJetSlimmer",
src = cms.InputTag("selectedPatJetsAK8PFPuppiSoftDropSubjets"),
packedPFCandidates = cms.InputTag("packedPFCandidates"),
dropJetVars = cms.string("1"),
dropDaughters = cms.string("0"),
rekeyDaughters = cms.string("1"),
dropTrackRefs = cms.string("1"),
dropSpecific = cms.string("1"),
dropTagInfos = cms.string("1"),
modifyJets = cms.bool(True),
mixedDaughters = cms.bool(False),
modifierConfig = cms.PSet( modifications = cms.VPSet() )
),
process, task)
## Establish references between PATified fat jets and subjets using the BoostedJetMerger
addToProcessAndTask("slimmedJetsAK8PFPuppiSoftDropPacked"+postfix,
cms.EDProducer("BoostedJetMerger",
jetSrc=cms.InputTag("selectedPatJetsAK8PFPuppiSoftDrop"),
subjetSrc=cms.InputTag("slimmedJetsAK8PFPuppiSoftDropSubjets")
),
process, task )
addToProcessAndTask("packedPatJetsAK8"+postfix, cms.EDProducer("JetSubstructurePacker",
jetSrc = cms.InputTag("selectedPatJetsAK8Puppi"+postfix),
distMax = cms.double(0.8),
algoTags = cms.VInputTag(
cms.InputTag("slimmedJetsAK8PFPuppiSoftDropPacked"+postfix)
),
algoLabels = cms.vstring(
'SoftDropPuppi'
),
fixDaughters = cms.bool(True),
packedPFCandidates = cms.InputTag("packedPFCandidates"+postfix),
),
process, task)
# switch off daughter re-keying since it's done in the JetSubstructurePacker (and can't be done afterwards)
process.slimmedJetsAK8.rekeyDaughters = "0"
# Reconfigure the slimmedAK8 jet information to keep
process.slimmedJetsAK8.dropDaughters = cms.string("pt < 170")
process.slimmedJetsAK8.dropSpecific = cms.string("pt < 170")
process.slimmedJetsAK8.dropTagInfos = cms.string("pt < 170")
def applySubstructure( process, postfix="" ) :
task = getPatAlgosToolsTask(process)
from PhysicsTools.PatAlgos.tools.jetTools import addJetCollection
from PhysicsTools.PatAlgos.producersLayer1.jetProducer_cfi import _patJets as patJetsDefault
# Configure the RECO jets
from RecoJets.JetProducers.ak4PFJets_cfi import ak4PFJetsPuppi
from RecoJets.JetProducers.ak8PFJets_cfi import ak8PFJetsPuppi, ak8PFJetsPuppiSoftDrop, ak8PFJetsPuppiConstituents, ak8PFJetsCHSConstituents
from RecoJets.JetProducers.ak8GenJets_cfi import ak8GenJets, ak8GenJetsSoftDrop, ak8GenJetsConstituents
addToProcessAndTask('ak4PFJetsPuppi'+postfix,ak4PFJetsPuppi.clone(), process, task)
addToProcessAndTask('ak8PFJetsPuppi'+postfix,ak8PFJetsPuppi.clone(), process, task)
addToProcessAndTask('ak8PFJetsPuppiConstituents', ak8PFJetsPuppiConstituents.clone(cut = cms.string('pt > 170.0 && abs(rapidity()) < 2.4') ), process, task )
addToProcessAndTask('ak8PFJetsCHSConstituents', ak8PFJetsCHSConstituents.clone(), process, task )
addToProcessAndTask('ak8PFJetsPuppiSoftDrop'+postfix, ak8PFJetsPuppiSoftDrop.clone( src = cms.InputTag('ak8PFJetsPuppiConstituents', 'constituents') ), process, task)
addToProcessAndTask('ak8GenJetsNoNuConstituents'+postfix, ak8GenJetsConstituents.clone(src='ak8GenJetsNoNu'), process, task )
addToProcessAndTask('ak8GenJetsNoNuSoftDrop'+postfix,ak8GenJetsSoftDrop.clone(src=cms.InputTag('ak8GenJetsNoNuConstituents'+postfix, 'constituents')),process,task)
addToProcessAndTask('slimmedGenJetsAK8SoftDropSubJets'+postfix,
cms.EDProducer("PATGenJetSlimmer",
src = cms.InputTag("ak8GenJetsNoNuSoftDrop"+postfix, "SubJets"),
packedGenParticles = cms.InputTag("packedGenParticles"),
cut = cms.string(""),
cutLoose = cms.string(""),
nLoose = cms.uint32(0),
clearDaughters = cms.bool(False), #False means rekeying
dropSpecific = cms.bool(True), # Save space
), process, task )
#add AK8 CHS
addJetCollection(process, postfix=postfix, labelName = 'AK8',
jetSource = cms.InputTag('ak8PFJetsCHS'+postfix),
algo= 'AK', rParam = 0.8,
btagDiscriminators = ['None'],
jetCorrections = ('AK8PFchs', cms.vstring(['L1FastJet', 'L2Relative', 'L3Absolute']), 'None'),
genJetCollection = cms.InputTag('slimmedGenJetsAK8')
)
getattr(process,"patJetsAK8"+postfix).userData.userFloats.src = [] # start with empty list of user floats
getattr(process,"selectedPatJetsAK8").cut = cms.string("pt > 170")
## add AK8 groomed masses with CHS
from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsCHSPruned, ak8PFJetsCHSSoftDrop
addToProcessAndTask('ak8PFJetsCHSPruned'+postfix, ak8PFJetsCHSPruned.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSSoftDrop'+postfix, ak8PFJetsCHSSoftDrop.clone(), process, task)
from RecoJets.JetProducers.ak8PFJetsCHS_groomingValueMaps_cfi import ak8PFJetsCHSPrunedMass, ak8PFJetsCHSTrimmedMass, ak8PFJetsCHSFilteredMass, ak8PFJetsCHSSoftDropMass
addToProcessAndTask('ak8PFJetsCHSPrunedMass'+postfix, ak8PFJetsCHSPrunedMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSTrimmedMass'+postfix, ak8PFJetsCHSTrimmedMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSFilteredMass'+postfix, ak8PFJetsCHSFilteredMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSSoftDropMass'+postfix, ak8PFJetsCHSSoftDropMass.clone(), process, task)
getattr(process,"patJetsAK8").userData.userFloats.src += ['ak8PFJetsCHSPrunedMass'+postfix,'ak8PFJetsCHSSoftDropMass'+postfix]
getattr(process,"patJetsAK8").addTagInfos = cms.bool(False)
# add Njetiness for CHS
process.load('RecoJets.JetProducers.nJettinessAdder_cfi')
task.add(process.Njettiness)
addToProcessAndTask('NjettinessAK8'+postfix, process.Njettiness.clone(), process, task)
getattr(process,"NjettinessAK8").src = cms.InputTag("ak8PFJetsCHS"+postfix)
getattr(process,"NjettinessAK8").cone = cms.double(0.8)
getattr(process,"patJetsAK8").userData.userFloats.src += ['NjettinessAK8'+postfix+':tau1','NjettinessAK8'+postfix+':tau2','NjettinessAK8'+postfix+':tau3','NjettinessAK8'+postfix+':tau4']
# add Njetiness from CHS
addToProcessAndTask('NjettinessAK8Subjets'+postfix, process.Njettiness.clone(), process, task)
getattr(process,"NjettinessAK8Subjets"+postfix).src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix, "SubJets")
getattr(process,"NjettinessAK8Subjets").cone = cms.double(0.8)
## PATify CHS soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName = 'AK8PFCHSSoftDrop',
jetSource = cms.InputTag('ak8PFJetsCHSSoftDrop'+postfix),
btagDiscriminators = ['None'],
jetCorrections = ('AK8PFchs', ['L1FastJet', 'L2Relative', 'L3Absolute'], 'None'),
getJetMCFlavour = False # jet flavor disabled
)
#add RECO AK8 from PUPPI and RECO AK8 PUPPI with soft drop... will be needed by ungroomed AK8 jets later
## PATify puppi soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName = 'AK8PFPuppiSoftDrop' + postfix,
jetSource = cms.InputTag('ak8PFJetsPuppiSoftDrop'+postfix),
btagDiscriminators = ['None'],
genJetCollection = cms.InputTag('slimmedGenJetsAK8'),
jetCorrections = ('AK8PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
getJetMCFlavour = False # jet flavor disabled
)
## PATify soft drop subjets
addJetCollection(
process,
postfix=postfix,
labelName = 'AK8PFPuppiSoftDropSubjets',
jetSource = cms.InputTag('ak8PFJetsPuppiSoftDrop'+postfix,'SubJets'),
algo = 'ak', # needed for subjet flavor clustering
rParam = 0.8, # needed for subjet flavor clustering
btagDiscriminators = ['pfDeepCSVJetTags:probb', 'pfDeepCSVJetTags:probbb', 'pfCombinedInclusiveSecondaryVertexV2BJetTags','pfCombinedMVAV2BJetTags'],
jetCorrections = ('AK4PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
explicitJTA = True, # needed for subjet b tagging
svClustering = True, # needed for subjet b tagging
genJetCollection = cms.InputTag('slimmedGenJetsAK8SoftDropSubJets'),
fatJets=cms.InputTag('ak8PFJetsPuppi'), # needed for subjet flavor clustering
groomedFatJets=cms.InputTag('ak8PFJetsPuppiSoftDrop') # needed for subjet flavor clustering
)
# add groomed ECFs and N-subjettiness to soft dropped pat::Jets for fat jets and subjets
process.load('RecoJets.JetProducers.ECF_cff')
addToProcessAndTask('nb1AK8PuppiSoftDrop'+postfix, process.ecfNbeta1.clone(src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix), cuts = cms.vstring('', '', 'pt > 250')), process, task)
addToProcessAndTask('nb2AK8PuppiSoftDrop'+postfix, process.ecfNbeta2.clone(src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix), cuts = cms.vstring('', '', 'pt > 250')), process, task)
#too slow now ==> disable
from Configuration.Eras.Modifier_pp_on_AA_2018_cff import pp_on_AA_2018
from Configuration.Eras.Modifier_pp_on_XeXe_2017_cff import pp_on_XeXe_2017
from Configuration.Eras.Modifier_phase2_common_cff import phase2_common
for e in [pp_on_XeXe_2017, pp_on_AA_2018, phase2_common]:
e.toModify(getattr(process,'nb1AK8PuppiSoftDrop'+postfix), cuts = ['pt > 999999', 'pt > 999999', 'pt > 999999'] )
e.toModify(getattr(process,'nb2AK8PuppiSoftDrop'+postfix), cuts = ['pt > 999999', 'pt > 999999', 'pt > 999999'] )
getattr(process,"patJetsAK8PFPuppiSoftDrop").userData.userFloats.src += ['nb1AK8PuppiSoftDrop'+postfix+':ecfN2','nb1AK8PuppiSoftDrop'+postfix+':ecfN3']
getattr(process,"patJetsAK8PFPuppiSoftDrop").userData.userFloats.src += ['nb2AK8PuppiSoftDrop'+postfix+':ecfN2','nb2AK8PuppiSoftDrop'+postfix+':ecfN3']
addToProcessAndTask('nb1AK8PuppiSoftDropSubjets'+postfix, process.ecfNbeta1.clone(src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix, "SubJets")), process, task)
addToProcessAndTask('nb2AK8PuppiSoftDropSubjets'+postfix, process.ecfNbeta2.clone(src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix, "SubJets")), process, task)
getattr(process,"patJetsAK8PFPuppiSoftDropSubjets"+postfix).userData.userFloats.src += ['nb1AK8PuppiSoftDropSubjets'+postfix+':ecfN2','nb1AK8PuppiSoftDropSubjets'+postfix+':ecfN3']
getattr(process,"patJetsAK8PFPuppiSoftDropSubjets"+postfix).userData.userFloats.src += ['nb2AK8PuppiSoftDropSubjets'+postfix+':ecfN2','nb2AK8PuppiSoftDropSubjets'+postfix+':ecfN3']
getattr(process,"patJetsAK8PFPuppiSoftDropSubjets"+postfix).userData.userFloats.src += ['NjettinessAK8Subjets'+postfix+':tau1','NjettinessAK8Subjets'+postfix+':tau2','NjettinessAK8Subjets'+postfix+':tau3','NjettinessAK8Subjets'+postfix+':tau4']
for e in [pp_on_XeXe_2017, pp_on_AA_2018, phase2_common]:
e.toModify(getattr(process,'nb1AK8PuppiSoftDropSubjets'+postfix), cuts = ['pt > 999999', 'pt > 999999', 'pt > 999999'] )
e.toModify(getattr(process,'nb2AK8PuppiSoftDropSubjets'+postfix), cuts = ['pt > 999999', 'pt > 999999', 'pt > 999999'] )
# rekey the groomed ECF value maps to the ungroomed reco jets, which will then be picked
# up by PAT in the user floats.
addToProcessAndTask("ak8PFJetsPuppiSoftDropValueMap"+postfix,
cms.EDProducer("RecoJetToPatJetDeltaRValueMapProducer",
src = cms.InputTag("ak8PFJetsPuppi"+postfix),
matched = cms.InputTag("patJetsAK8PFPuppiSoftDrop"+postfix),
distMax = cms.double(0.8),
values = cms.vstring([
'userFloat("nb1AK8PuppiSoftDrop'+postfix+':ecfN2")',
'userFloat("nb1AK8PuppiSoftDrop'+postfix+':ecfN3")',
'userFloat("nb2AK8PuppiSoftDrop'+postfix+':ecfN2")',
'userFloat("nb2AK8PuppiSoftDrop'+postfix+':ecfN3")',
]),
valueLabels = cms.vstring( [
'nb1AK8PuppiSoftDropN2',
'nb1AK8PuppiSoftDropN3',
'nb2AK8PuppiSoftDropN2',
'nb2AK8PuppiSoftDropN3',
]) ),
process, task)
# Patify AK8 PF PUPPI
addJetCollection(process, postfix=postfix, labelName = 'AK8Puppi',
jetSource = cms.InputTag('ak8PFJetsPuppi'+postfix),
algo= 'AK', rParam = 0.8,
jetCorrections = ('AK8PFPuppi', cms.vstring(['L2Relative', 'L3Absolute']), 'None'),
btagDiscriminators = ([
'pfCombinedSecondaryVertexV2BJetTags',
'pfCombinedInclusiveSecondaryVertexV2BJetTags',
'pfCombinedMVAV2BJetTags',
'pfDeepCSVJetTags:probb',
'pfDeepCSVJetTags:probc',
'pfDeepCSVJetTags:probudsg',
'pfDeepCSVJetTags:probbb',
'pfBoostedDoubleSecondaryVertexAK8BJetTags']),
genJetCollection = cms.InputTag('slimmedGenJetsAK8')
)
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src = [] # start with empty list of user floats
getattr(process,"selectedPatJetsAK8Puppi"+postfix).cut = cms.string("pt > 100")
getattr(process,"selectedPatJetsAK8Puppi"+postfix).cutLoose = cms.string("pt > 30")
getattr(process,"selectedPatJetsAK8Puppi"+postfix).nLoose = cms.uint32(3)
from RecoJets.JetAssociationProducers.j2tParametersVX_cfi import j2tParametersVX
addToProcessAndTask('ak8PFJetsPuppiTracksAssociatorAtVertex'+postfix, cms.EDProducer("JetTracksAssociatorAtVertex",
j2tParametersVX.clone( coneSize = cms.double(0.8) ),
jets = cms.InputTag("ak8PFJetsPuppi") ),
process, task)
addToProcessAndTask('patJetAK8PuppiCharge'+postfix, cms.EDProducer("JetChargeProducer",
src = cms.InputTag("ak8PFJetsPuppiTracksAssociatorAtVertex"),
var = cms.string('Pt'),
exp = cms.double(1.0) ),
process, task)
## now add AK8 groomed masses and ECF
from RecoJets.JetProducers.ak8PFJetsPuppi_groomingValueMaps_cfi import ak8PFJetsPuppiSoftDropMass
addToProcessAndTask('ak8PFJetsPuppiSoftDropMass'+postfix, ak8PFJetsPuppiSoftDropMass.clone(), process, task)
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src += ['ak8PFJetsPuppiSoftDropMass'+postfix]
getattr(process,"patJetsAK8Puppi"+postfix).addTagInfos = cms.bool(False)
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src += [
cms.InputTag('ak8PFJetsPuppiSoftDropValueMap'+postfix,'nb1AK8PuppiSoftDropN2'),
cms.InputTag('ak8PFJetsPuppiSoftDropValueMap'+postfix,'nb1AK8PuppiSoftDropN3'),
cms.InputTag('ak8PFJetsPuppiSoftDropValueMap'+postfix,'nb2AK8PuppiSoftDropN2'),
cms.InputTag('ak8PFJetsPuppiSoftDropValueMap'+postfix,'nb2AK8PuppiSoftDropN3'),
]
# add PUPPI Njetiness
addToProcessAndTask('NjettinessAK8Puppi'+postfix, process.Njettiness.clone(), process, task)
getattr(process,"NjettinessAK8Puppi"+postfix).src = cms.InputTag("ak8PFJetsPuppi"+postfix)
getattr(process,"NjettinessAK8Puppi").cone = cms.double(0.8)
getattr(process,"patJetsAK8Puppi").userData.userFloats.src += ['NjettinessAK8Puppi'+postfix+':tau1','NjettinessAK8Puppi'+postfix+':tau2','NjettinessAK8Puppi'+postfix+':tau3','NjettinessAK8Puppi'+postfix+':tau4']
# Now combine the CHS and PUPPI information into the PUPPI jets via delta R value maps
addToProcessAndTask("ak8PFJetsCHSValueMap"+postfix, cms.EDProducer("RecoJetToPatJetDeltaRValueMapProducer",
src = cms.InputTag("ak8PFJetsPuppi"+postfix),
matched = cms.InputTag("patJetsAK8"+postfix),
distMax = cms.double(0.8),
values = cms.vstring([
'userFloat("ak8PFJetsCHSPrunedMass"'+postfix+')',
'userFloat("ak8PFJetsCHSSoftDropMass"'+postfix+')',
'userFloat("NjettinessAK8'+postfix+':tau1")',
'userFloat("NjettinessAK8'+postfix+':tau2")',
'userFloat("NjettinessAK8'+postfix+':tau3")',
'userFloat("NjettinessAK8'+postfix+':tau4")',
'pt','eta','phi','mass', 'jetArea', 'jecFactor(0)'
]),
valueLabels = cms.vstring( [
'ak8PFJetsCHSPrunedMass',
'ak8PFJetsCHSSoftDropMass',
'NjettinessAK8CHSTau1',
'NjettinessAK8CHSTau2',
'NjettinessAK8CHSTau3',
'NjettinessAK8CHSTau4',
'pt','eta','phi','mass', 'jetArea', 'rawFactor'
]) ),
process, task)
# Now set up the user floats
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src += [
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'ak8PFJetsCHSPrunedMass'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'ak8PFJetsCHSSoftDropMass'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'NjettinessAK8CHSTau1'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'NjettinessAK8CHSTau2'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'NjettinessAK8CHSTau3'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'NjettinessAK8CHSTau4'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'pt'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'eta'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'phi'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'mass'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'jetArea'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'rawFactor'),
]
addToProcessAndTask("slimmedJetsAK8PFPuppiSoftDropSubjets"+postfix,
cms.EDProducer("PATJetSlimmer",
src = cms.InputTag("selectedPatJetsAK8PFPuppiSoftDropSubjets"),
packedPFCandidates = cms.InputTag("packedPFCandidates"),
dropJetVars = cms.string("1"),
dropDaughters = cms.string("0"),
rekeyDaughters = cms.string("1"),
dropTrackRefs = cms.string("1"),
dropSpecific = cms.string("1"),
dropTagInfos = cms.string("1"),
modifyJets = cms.bool(True),
mixedDaughters = cms.bool(False),
modifierConfig = cms.PSet( modifications = cms.VPSet() )
),
process, task)
## Establish references between PATified fat jets and subjets using the BoostedJetMerger
addToProcessAndTask("slimmedJetsAK8PFPuppiSoftDropPacked"+postfix,
cms.EDProducer("BoostedJetMerger",
jetSrc=cms.InputTag("selectedPatJetsAK8PFPuppiSoftDrop"),
subjetSrc=cms.InputTag("slimmedJetsAK8PFPuppiSoftDropSubjets")
),
process, task )
addToProcessAndTask("packedPatJetsAK8"+postfix, cms.EDProducer("JetSubstructurePacker",
jetSrc = cms.InputTag("selectedPatJetsAK8Puppi"+postfix),
distMax = cms.double(0.8),
algoTags = cms.VInputTag(
cms.InputTag("slimmedJetsAK8PFPuppiSoftDropPacked"+postfix)
),
algoLabels = cms.vstring(
'SoftDropPuppi'
),
fixDaughters = cms.bool(True),
packedPFCandidates = cms.InputTag("packedPFCandidates"+postfix),
),
process, task)
# switch off daughter re-keying since it's done in the JetSubstructurePacker (and can't be done afterwards)
process.slimmedJetsAK8.rekeyDaughters = "0"
# Reconfigure the slimmedAK8 jet information to keep
process.slimmedJetsAK8.dropDaughters = cms.string("pt < 170")
process.slimmedJetsAK8.dropSpecific = cms.string("pt < 170")
process.slimmedJetsAK8.dropTagInfos = cms.string("pt < 170")
def applySubstructure(process, postfix=""):
task = getPatAlgosToolsTask(process)
from PhysicsTools.PatAlgos.tools.jetTools import addJetCollection
from PhysicsTools.PatAlgos.producersLayer1.jetProducer_cfi import _patJets as patJetsDefault
# Configure the RECO jets
from RecoJets.JetProducers.ak4PFJets_cfi import ak4PFJetsPuppi
from RecoJets.JetProducers.ak8PFJets_cfi import ak8PFJetsPuppi, ak8PFJetsPuppiSoftDrop, ak8PFJetsPuppiConstituents, ak8PFJetsCHSConstituents
from RecoJets.JetProducers.ak8GenJets_cfi import ak8GenJets, ak8GenJetsSoftDrop, ak8GenJetsConstituents
addToProcessAndTask('ak4PFJetsPuppi' + postfix, ak4PFJetsPuppi.clone(),
process, task)
addToProcessAndTask('ak8PFJetsPuppi' + postfix, ak8PFJetsPuppi.clone(),
process, task)
addToProcessAndTask(
'ak8PFJetsPuppiConstituents',
ak8PFJetsPuppiConstituents.clone(
cut=cms.string('pt > 170.0 && abs(rapidity()) < 2.4')), process,
task)
addToProcessAndTask('ak8PFJetsCHSConstituents',
ak8PFJetsCHSConstituents.clone(), process, task)
addToProcessAndTask(
'ak8PFJetsPuppiSoftDrop' + postfix,
ak8PFJetsPuppiSoftDrop.clone(
src=cms.InputTag('ak8PFJetsPuppiConstituents', 'constituents')),
process, task)
addToProcessAndTask('ak8GenJetsNoNuConstituents' + postfix,
ak8GenJetsConstituents.clone(src='ak8GenJetsNoNu'),
process, task)
addToProcessAndTask(
'ak8GenJetsNoNuSoftDrop' + postfix,
ak8GenJetsSoftDrop.clone(
src=cms.InputTag('ak8GenJetsNoNuConstituents' +
postfix, 'constituents')), process, task)
addToProcessAndTask(
'slimmedGenJetsAK8SoftDropSubJets' + postfix,
cms.EDProducer(
"PATGenJetSlimmer",
src=cms.InputTag("ak8GenJetsNoNuSoftDrop" + postfix, "SubJets"),
packedGenParticles=cms.InputTag("packedGenParticles"),
cut=cms.string(""),
cutLoose=cms.string(""),
nLoose=cms.uint32(0),
clearDaughters=cms.bool(False), #False means rekeying
dropSpecific=cms.bool(True), # Save space
),
process,
task)
#add AK8 CHS
addJetCollection(
process,
postfix=postfix,
labelName='AK8',
jetSource=cms.InputTag('ak8PFJetsCHS' + postfix),
algo='AK',
rParam=0.8,
btagDiscriminators=['None'],
jetCorrections=('AK8PFchs',
cms.vstring(['L1FastJet', 'L2Relative',
'L3Absolute']), 'None'),
genJetCollection=cms.InputTag('slimmedGenJetsAK8'))
getattr(process, "patJetsAK8" + postfix).userData.userFloats.src = [
] # start with empty list of user floats
getattr(process, "selectedPatJetsAK8").cut = cms.string("pt > 170")
## add AK8 groomed masses with CHS
from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsCHSPruned, ak8PFJetsCHSSoftDrop
addToProcessAndTask('ak8PFJetsCHSPruned' + postfix,
ak8PFJetsCHSPruned.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSSoftDrop' + postfix,
ak8PFJetsCHSSoftDrop.clone(), process, task)
from RecoJets.JetProducers.ak8PFJetsCHS_groomingValueMaps_cfi import ak8PFJetsCHSPrunedMass, ak8PFJetsCHSTrimmedMass, ak8PFJetsCHSFilteredMass, ak8PFJetsCHSSoftDropMass
addToProcessAndTask('ak8PFJetsCHSPrunedMass' + postfix,
ak8PFJetsCHSPrunedMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSTrimmedMass' + postfix,
ak8PFJetsCHSTrimmedMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSFilteredMass' + postfix,
ak8PFJetsCHSFilteredMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSSoftDropMass' + postfix,
ak8PFJetsCHSSoftDropMass.clone(), process, task)
getattr(process, "patJetsAK8").userData.userFloats.src += [
'ak8PFJetsCHSPrunedMass' + postfix,
'ak8PFJetsCHSSoftDropMass' + postfix
]
getattr(process, "patJetsAK8").addTagInfos = cms.bool(False)
# add Njetiness for CHS
process.load('RecoJets.JetProducers.nJettinessAdder_cfi')
task.add(process.Njettiness)
addToProcessAndTask('NjettinessAK8' + postfix, process.Njettiness.clone(),
process, task)
getattr(process,
"NjettinessAK8").src = cms.InputTag("ak8PFJetsCHS" + postfix)
getattr(process, "NjettinessAK8").cone = cms.double(0.8)
getattr(process, "patJetsAK8").userData.userFloats.src += [
'NjettinessAK8' + postfix + ':tau1',
'NjettinessAK8' + postfix + ':tau2',
'NjettinessAK8' + postfix + ':tau3',
'NjettinessAK8' + postfix + ':tau4'
]
# add Njetiness from CHS
addToProcessAndTask('NjettinessAK8Subjets' + postfix,
process.Njettiness.clone(), process, task)
getattr(process, "NjettinessAK8Subjets" + postfix).src = cms.InputTag(
"ak8PFJetsPuppiSoftDrop" + postfix, "SubJets")
getattr(process, "NjettinessAK8Subjets").cone = cms.double(0.8)
## PATify CHS soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName='AK8PFCHSSoftDrop',
jetSource=cms.InputTag('ak8PFJetsCHSSoftDrop' + postfix),
btagDiscriminators=['None'],
jetCorrections=('AK8PFchs', ['L1FastJet', 'L2Relative',
'L3Absolute'], 'None'),
getJetMCFlavour=False # jet flavor disabled
)
#add RECO AK8 from PUPPI and RECO AK8 PUPPI with soft drop... will be needed by ungroomed AK8 jets later
## PATify puppi soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName='AK8PFPuppiSoftDrop' + postfix,
jetSource=cms.InputTag('ak8PFJetsPuppiSoftDrop' + postfix),
btagDiscriminators=['None'],
genJetCollection=cms.InputTag('slimmedGenJetsAK8'),
jetCorrections=('AK8PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
getJetMCFlavour=False # jet flavor disabled
)
## PATify soft drop subjets
addJetCollection(
process,
postfix=postfix,
labelName='AK8PFPuppiSoftDropSubjets',
jetSource=cms.InputTag('ak8PFJetsPuppiSoftDrop' + postfix, 'SubJets'),
algo='ak', # needed for subjet flavor clustering
rParam=0.8, # needed for subjet flavor clustering
btagDiscriminators=[
'pfDeepCSVJetTags:probb', 'pfDeepCSVJetTags:probbb',
'pfCombinedInclusiveSecondaryVertexV2BJetTags',
'pfCombinedMVAV2BJetTags'
],
jetCorrections=('AK4PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
explicitJTA=True, # needed for subjet b tagging
svClustering=True, # needed for subjet b tagging
genJetCollection=cms.InputTag('slimmedGenJetsAK8SoftDropSubJets'),
fatJets=cms.InputTag(
'ak8PFJetsPuppi'), # needed for subjet flavor clustering
groomedFatJets=cms.InputTag(
'ak8PFJetsPuppiSoftDrop') # needed for subjet flavor clustering
)
# add groomed ECFs and N-subjettiness to soft dropped pat::Jets for fat jets and subjets
process.load('RecoJets.JetProducers.ECF_cff')
addToProcessAndTask(
'nb1AK8PuppiSoftDrop' + postfix,
process.ecfNbeta1.clone(
src=cms.InputTag("ak8PFJetsPuppiSoftDrop" + postfix),
cuts=cms.vstring('', '', 'pt > 250')), process, task)
addToProcessAndTask(
'nb2AK8PuppiSoftDrop' + postfix,
process.ecfNbeta2.clone(
src=cms.InputTag("ak8PFJetsPuppiSoftDrop" + postfix),
cuts=cms.vstring('', '', 'pt > 250')), process, task)
#too slow now ==> disable
from Configuration.Eras.Modifier_pp_on_AA_2018_cff import pp_on_AA_2018
from Configuration.Eras.Modifier_pp_on_XeXe_2017_cff import pp_on_XeXe_2017
from Configuration.Eras.Modifier_phase2_common_cff import phase2_common
for e in [pp_on_XeXe_2017, pp_on_AA_2018, phase2_common]:
e.toModify(getattr(process, 'nb1AK8PuppiSoftDrop' + postfix),
cuts=['pt > 999999', 'pt > 999999', 'pt > 999999'])
e.toModify(getattr(process, 'nb2AK8PuppiSoftDrop' + postfix),
cuts=['pt > 999999', 'pt > 999999', 'pt > 999999'])
getattr(process, "patJetsAK8PFPuppiSoftDrop").userData.userFloats.src += [
'nb1AK8PuppiSoftDrop' + postfix + ':ecfN2',
'nb1AK8PuppiSoftDrop' + postfix + ':ecfN3'
]
getattr(process, "patJetsAK8PFPuppiSoftDrop").userData.userFloats.src += [
'nb2AK8PuppiSoftDrop' + postfix + ':ecfN2',
'nb2AK8PuppiSoftDrop' + postfix + ':ecfN3'
]
addToProcessAndTask(
'nb1AK8PuppiSoftDropSubjets' + postfix,
process.ecfNbeta1.clone(
src=cms.InputTag("ak8PFJetsPuppiSoftDrop" + postfix, "SubJets")),
process, task)
addToProcessAndTask(
'nb2AK8PuppiSoftDropSubjets' + postfix,
process.ecfNbeta2.clone(
src=cms.InputTag("ak8PFJetsPuppiSoftDrop" + postfix, "SubJets")),
process, task)
getattr(process, "patJetsAK8PFPuppiSoftDropSubjets" +
postfix).userData.userFloats.src += [
'nb1AK8PuppiSoftDropSubjets' + postfix + ':ecfN2',
'nb1AK8PuppiSoftDropSubjets' + postfix + ':ecfN3'
]
getattr(process, "patJetsAK8PFPuppiSoftDropSubjets" +
postfix).userData.userFloats.src += [
'nb2AK8PuppiSoftDropSubjets' + postfix + ':ecfN2',
'nb2AK8PuppiSoftDropSubjets' + postfix + ':ecfN3'
]
getattr(process, "patJetsAK8PFPuppiSoftDropSubjets" +
postfix).userData.userFloats.src += [
'NjettinessAK8Subjets' + postfix + ':tau1',
'NjettinessAK8Subjets' + postfix + ':tau2',
'NjettinessAK8Subjets' + postfix + ':tau3',
'NjettinessAK8Subjets' + postfix + ':tau4'
]
for e in [pp_on_XeXe_2017, pp_on_AA_2018, phase2_common]:
e.toModify(getattr(process, 'nb1AK8PuppiSoftDropSubjets' + postfix),
cuts=['pt > 999999', 'pt > 999999', 'pt > 999999'])
e.toModify(getattr(process, 'nb2AK8PuppiSoftDropSubjets' + postfix),
cuts=['pt > 999999', 'pt > 999999', 'pt > 999999'])
# rekey the groomed ECF value maps to the ungroomed reco jets, which will then be picked
# up by PAT in the user floats.
addToProcessAndTask(
"ak8PFJetsPuppiSoftDropValueMap" + postfix,
cms.EDProducer(
"RecoJetToPatJetDeltaRValueMapProducer",
src=cms.InputTag("ak8PFJetsPuppi" + postfix),
matched=cms.InputTag("patJetsAK8PFPuppiSoftDrop" + postfix),
distMax=cms.double(0.8),
values=cms.vstring([
'userFloat("nb1AK8PuppiSoftDrop' + postfix + ':ecfN2")',
'userFloat("nb1AK8PuppiSoftDrop' + postfix + ':ecfN3")',
'userFloat("nb2AK8PuppiSoftDrop' + postfix + ':ecfN2")',
'userFloat("nb2AK8PuppiSoftDrop' + postfix + ':ecfN3")',
]),
valueLabels=cms.vstring([
'nb1AK8PuppiSoftDropN2',
'nb1AK8PuppiSoftDropN3',
'nb2AK8PuppiSoftDropN2',
'nb2AK8PuppiSoftDropN3',
])), process, task)
# Patify AK8 PF PUPPI
addJetCollection(process,
postfix=postfix,
labelName='AK8Puppi',
jetSource=cms.InputTag('ak8PFJetsPuppi' + postfix),
algo='AK',
rParam=0.8,
jetCorrections=('AK8PFPuppi',
cms.vstring(['L2Relative',
'L3Absolute']), 'None'),
btagDiscriminators=([
'pfCombinedSecondaryVertexV2BJetTags',
'pfCombinedInclusiveSecondaryVertexV2BJetTags',
'pfCombinedMVAV2BJetTags', 'pfDeepCSVJetTags:probb',
'pfDeepCSVJetTags:probc', 'pfDeepCSVJetTags:probudsg',
'pfDeepCSVJetTags:probbb',
'pfBoostedDoubleSecondaryVertexAK8BJetTags'
]),
genJetCollection=cms.InputTag('slimmedGenJetsAK8'))
getattr(process, "patJetsAK8Puppi" + postfix).userData.userFloats.src = [
] # start with empty list of user floats
getattr(process,
"selectedPatJetsAK8Puppi" + postfix).cut = cms.string("pt > 100")
getattr(process, "selectedPatJetsAK8Puppi" +
postfix).cutLoose = cms.string("pt > 30")
getattr(process,
"selectedPatJetsAK8Puppi" + postfix).nLoose = cms.uint32(3)
from RecoJets.JetAssociationProducers.j2tParametersVX_cfi import j2tParametersVX
addToProcessAndTask(
'ak8PFJetsPuppiTracksAssociatorAtVertex' + postfix,
cms.EDProducer("JetTracksAssociatorAtVertex",
j2tParametersVX.clone(coneSize=cms.double(0.8)),
jets=cms.InputTag("ak8PFJetsPuppi")), process, task)
addToProcessAndTask(
'patJetAK8PuppiCharge' + postfix,
cms.EDProducer(
"JetChargeProducer",
src=cms.InputTag("ak8PFJetsPuppiTracksAssociatorAtVertex"),
var=cms.string('Pt'),
exp=cms.double(1.0)), process, task)
## now add AK8 groomed masses and ECF
from RecoJets.JetProducers.ak8PFJetsPuppi_groomingValueMaps_cfi import ak8PFJetsPuppiSoftDropMass
addToProcessAndTask('ak8PFJetsPuppiSoftDropMass' + postfix,
ak8PFJetsPuppiSoftDropMass.clone(), process, task)
getattr(process, "patJetsAK8Puppi" + postfix).userData.userFloats.src += [
'ak8PFJetsPuppiSoftDropMass' + postfix
]
getattr(process, "patJetsAK8Puppi" + postfix).addTagInfos = cms.bool(False)
getattr(process, "patJetsAK8Puppi" + postfix).userData.userFloats.src += [
cms.InputTag('ak8PFJetsPuppiSoftDropValueMap' + postfix,
'nb1AK8PuppiSoftDropN2'),
cms.InputTag('ak8PFJetsPuppiSoftDropValueMap' + postfix,
'nb1AK8PuppiSoftDropN3'),
cms.InputTag('ak8PFJetsPuppiSoftDropValueMap' + postfix,
'nb2AK8PuppiSoftDropN2'),
cms.InputTag('ak8PFJetsPuppiSoftDropValueMap' + postfix,
'nb2AK8PuppiSoftDropN3'),
]
# add PUPPI Njetiness
addToProcessAndTask('NjettinessAK8Puppi' + postfix,
process.Njettiness.clone(), process, task)
getattr(process, "NjettinessAK8Puppi" +
postfix).src = cms.InputTag("ak8PFJetsPuppi" + postfix)
getattr(process, "NjettinessAK8Puppi").cone = cms.double(0.8)
getattr(process, "patJetsAK8Puppi").userData.userFloats.src += [
'NjettinessAK8Puppi' + postfix + ':tau1',
'NjettinessAK8Puppi' + postfix + ':tau2',
'NjettinessAK8Puppi' + postfix + ':tau3',
'NjettinessAK8Puppi' + postfix + ':tau4'
]
# Now combine the CHS and PUPPI information into the PUPPI jets via delta R value maps
addToProcessAndTask(
"ak8PFJetsCHSValueMap" + postfix,
cms.EDProducer(
"RecoJetToPatJetDeltaRValueMapProducer",
src=cms.InputTag("ak8PFJetsPuppi" + postfix),
matched=cms.InputTag("patJetsAK8" + postfix),
distMax=cms.double(0.8),
values=cms.vstring([
'userFloat("ak8PFJetsCHSPrunedMass"' + postfix + ')',
'userFloat("ak8PFJetsCHSSoftDropMass"' + postfix + ')',
'userFloat("NjettinessAK8' + postfix + ':tau1")',
'userFloat("NjettinessAK8' + postfix + ':tau2")',
'userFloat("NjettinessAK8' + postfix + ':tau3")',
'userFloat("NjettinessAK8' + postfix + ':tau4")', 'pt', 'eta',
'phi', 'mass', 'jetArea', 'jecFactor(0)'
]),
valueLabels=cms.vstring([
'ak8PFJetsCHSPrunedMass', 'ak8PFJetsCHSSoftDropMass',
'NjettinessAK8CHSTau1', 'NjettinessAK8CHSTau2',
'NjettinessAK8CHSTau3', 'NjettinessAK8CHSTau4', 'pt', 'eta',
'phi', 'mass', 'jetArea', 'rawFactor'
])), process, task)
# Now set up the user floats
getattr(process, "patJetsAK8Puppi" + postfix).userData.userFloats.src += [
cms.InputTag('ak8PFJetsCHSValueMap' + postfix,
'ak8PFJetsCHSPrunedMass'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix,
'ak8PFJetsCHSSoftDropMass'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'NjettinessAK8CHSTau1'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'NjettinessAK8CHSTau2'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'NjettinessAK8CHSTau3'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'NjettinessAK8CHSTau4'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'pt'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'eta'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'phi'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'mass'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'jetArea'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'rawFactor'),
]
addToProcessAndTask(
"slimmedJetsAK8PFPuppiSoftDropSubjets" + postfix,
cms.EDProducer(
"PATJetSlimmer",
src=cms.InputTag("selectedPatJetsAK8PFPuppiSoftDropSubjets"),
packedPFCandidates=cms.InputTag("packedPFCandidates"),
dropJetVars=cms.string("1"),
dropDaughters=cms.string("0"),
rekeyDaughters=cms.string("1"),
dropTrackRefs=cms.string("1"),
dropSpecific=cms.string("1"),
dropTagInfos=cms.string("1"),
modifyJets=cms.bool(True),
mixedDaughters=cms.bool(False),
modifierConfig=cms.PSet(modifications=cms.VPSet())), process, task)
## Establish references between PATified fat jets and subjets using the BoostedJetMerger
addToProcessAndTask(
"slimmedJetsAK8PFPuppiSoftDropPacked" + postfix,
cms.EDProducer(
"BoostedJetMerger",
jetSrc=cms.InputTag("selectedPatJetsAK8PFPuppiSoftDrop"),
subjetSrc=cms.InputTag("slimmedJetsAK8PFPuppiSoftDropSubjets")),
process, task)
addToProcessAndTask(
"packedPatJetsAK8" + postfix,
cms.EDProducer(
"JetSubstructurePacker",
jetSrc=cms.InputTag("selectedPatJetsAK8Puppi" + postfix),
distMax=cms.double(0.8),
algoTags=cms.VInputTag(
cms.InputTag("slimmedJetsAK8PFPuppiSoftDropPacked" + postfix)),
algoLabels=cms.vstring('SoftDropPuppi'),
fixDaughters=cms.bool(True),
packedPFCandidates=cms.InputTag("packedPFCandidates" + postfix),
), process, task)
# switch off daughter re-keying since it's done in the JetSubstructurePacker (and can't be done afterwards)
process.slimmedJetsAK8.rekeyDaughters = "0"
# Reconfigure the slimmedAK8 jet information to keep
process.slimmedJetsAK8.dropDaughters = cms.string("pt < 170")
process.slimmedJetsAK8.dropSpecific = cms.string("pt < 170")
process.slimmedJetsAK8.dropTagInfos = cms.string("pt < 170")
def applySubstructure( process, postfix="" ) :
task = getPatAlgosToolsTask(process)
from PhysicsTools.PatAlgos.tools.jetTools import addJetCollection
from PhysicsTools.PatAlgos.producersLayer1.jetProducer_cfi import _patJets as patJetsDefault
#add AK8
addJetCollection(process, postfix=postfix, labelName = 'AK8',
jetSource = cms.InputTag('ak8PFJetsCHS'+postfix),
algo= 'AK', rParam = 0.8,
jetCorrections = ('AK8PFchs', cms.vstring(['L1FastJet', 'L2Relative', 'L3Absolute']), 'None'),
genJetCollection = cms.InputTag('slimmedGenJetsAK8')
)
getattr(process,"patJetsAK8"+postfix).userData.userFloats.src = [] # start with empty list of user floats
getattr(process,"selectedPatJetsAK8").cut = cms.string("pt > 170")
## AK8 groomed masses
from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsCHSPruned, ak8PFJetsCHSSoftDrop
addToProcessAndTask('ak8PFJetsCHSPruned'+postfix, ak8PFJetsCHSPruned.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSSoftDrop'+postfix, ak8PFJetsCHSSoftDrop.clone(), process, task)
from RecoJets.JetProducers.ak8PFJetsCHS_groomingValueMaps_cfi import ak8PFJetsCHSPrunedMass, ak8PFJetsCHSTrimmedMass, ak8PFJetsCHSFilteredMass, ak8PFJetsCHSSoftDropMass
addToProcessAndTask('ak8PFJetsCHSPrunedMass'+postfix, ak8PFJetsCHSPrunedMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSTrimmedMass'+postfix, ak8PFJetsCHSTrimmedMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSFilteredMass'+postfix, ak8PFJetsCHSFilteredMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSSoftDropMass'+postfix, ak8PFJetsCHSSoftDropMass.clone(), process, task)
getattr(process,"patJetsAK8").userData.userFloats.src += ['ak8PFJetsCHSPrunedMass'+postfix,'ak8PFJetsCHSSoftDropMass'+postfix]
getattr(process,"patJetsAK8").addTagInfos = cms.bool(False)
# add Njetiness
process.load('RecoJets.JetProducers.nJettinessAdder_cfi')
task.add(process.Njettiness)
addToProcessAndTask('NjettinessAK8'+postfix, process.Njettiness.clone(), process, task)
getattr(process,"NjettinessAK8").src = cms.InputTag("ak8PFJetsCHS"+postfix)
getattr(process,"NjettinessAK8").cone = cms.double(0.8)
getattr(process,"patJetsAK8").userData.userFloats.src += ['NjettinessAK8'+postfix+':tau1','NjettinessAK8'+postfix+':tau2','NjettinessAK8'+postfix+':tau3']
#add AK8 from PUPPI
from RecoJets.JetProducers.ak4PFJets_cfi import ak4PFJetsPuppi
from RecoJets.JetProducers.ak8PFJets_cfi import ak8PFJetsPuppi
addToProcessAndTask('ak4PFJetsPuppi'+postfix,ak4PFJetsPuppi.clone(), process, task)
addToProcessAndTask('ak8PFJetsPuppi'+postfix,ak8PFJetsPuppi.clone(), process, task)
from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsPuppiSoftDrop
addToProcessAndTask('ak8PFJetsPuppiSoftDrop'+postfix, ak8PFJetsPuppiSoftDrop.clone(), process, task)
getattr(process,"ak8PFJetsPuppi").doAreaFastjet = True # even for standard ak8PFJets this is overwritten in RecoJets/Configuration/python/RecoPFJets_cff
#add AK8 from PUPPI
from RecoJets.JetProducers.ak4PFJets_cfi import ak4PFJetsPuppi
from RecoJets.JetProducers.ak8PFJets_cfi import ak8PFJetsPuppi, ak8PFJetsPuppiSoftDrop, ak8PFJetsPuppiConstituents, ak8PFJetsCHSConstituents
#from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsPuppi, ak8PFJetsPuppiSoftDrop, ak8PFJetsPuppiConstituents, ak8PFJetsCHSConstituents
addToProcessAndTask('ak4PFJetsPuppi'+postfix,ak4PFJetsPuppi.clone(), process, task)
addToProcessAndTask('ak8PFJetsPuppiConstituents', ak8PFJetsPuppiConstituents.clone(), process, task )
addToProcessAndTask('ak8PFJetsCHSConstituents', ak8PFJetsCHSConstituents.clone(), process, task )
addToProcessAndTask('ak8PFJetsPuppi'+postfix,ak8PFJetsPuppi.clone(), process, task)
addToProcessAndTask('ak8PFJetsPuppiSoftDrop'+postfix, ak8PFJetsPuppiSoftDrop.clone(), process, task)
getattr(process,"ak8PFJetsPuppi").doAreaFastjet = True # even for standard ak8PFJets this is overwritten in RecoJets/Configuration/python/RecoPFJets_cff
addJetCollection(process, postfix=postfix, labelName = 'AK8Puppi',
jetSource = cms.InputTag('ak8PFJetsPuppi'+postfix),
algo= 'AK', rParam = 0.8,
jetCorrections = ('AK8PFPuppi', cms.vstring(['L2Relative', 'L3Absolute']), 'None'),
btagDiscriminators = ([x.value() for x in patJetsDefault.discriminatorSources] + ['pfBoostedDoubleSecondaryVertexAK8BJetTags']),
genJetCollection = cms.InputTag('slimmedGenJetsAK8')
)
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src = [] # start with empty list of user floats
getattr(process,"selectedPatJetsAK8Puppi"+postfix).cut = cms.string("pt > 170")
from RecoJets.JetAssociationProducers.j2tParametersVX_cfi import j2tParametersVX
addToProcessAndTask('ak8PFJetsPuppiTracksAssociatorAtVertex'+postfix, cms.EDProducer("JetTracksAssociatorAtVertex",
j2tParametersVX.clone( coneSize = cms.double(0.8) ),
jets = cms.InputTag("ak8PFJetsPuppi") ),
process, task)
addToProcessAndTask('patJetAK8PuppiCharge'+postfix, cms.EDProducer("JetChargeProducer",
src = cms.InputTag("ak8PFJetsPuppiTracksAssociatorAtVertex"),
var = cms.string('Pt'),
exp = cms.double(1.0) ),
process, task)
## AK8 groomed masses
from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsPuppiSoftDrop
addToProcessAndTask('ak8PFJetsPuppiSoftDrop'+postfix, ak8PFJetsPuppiSoftDrop.clone(), process, task)
from RecoJets.JetProducers.ak8PFJetsPuppi_groomingValueMaps_cfi import ak8PFJetsPuppiSoftDropMass
addToProcessAndTask('ak8PFJetsPuppiSoftDropMass'+postfix, ak8PFJetsPuppiSoftDropMass.clone(), process, task)
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src += ['ak8PFJetsPuppiSoftDropMass'+postfix]
getattr(process,"patJetsAK8Puppi"+postfix).addTagInfos = cms.bool(False)
# add Njetiness
addToProcessAndTask('NjettinessAK8Puppi'+postfix, process.Njettiness.clone(), process, task)
getattr(process,"NjettinessAK8Puppi"+postfix).src = cms.InputTag("ak8PFJetsPuppi"+postfix)
getattr(process,"NjettinessAK8Puppi").cone = cms.double(0.8)
getattr(process,"patJetsAK8Puppi").userData.userFloats.src += ['NjettinessAK8Puppi'+postfix+':tau1','NjettinessAK8Puppi'+postfix+':tau2','NjettinessAK8Puppi'+postfix+':tau3']
addToProcessAndTask("ak8PFJetsCHSValueMap"+postfix, cms.EDProducer("RecoJetToPatJetDeltaRValueMapProducer",
src = cms.InputTag("ak8PFJetsPuppi"+postfix),
matched = cms.InputTag("patJetsAK8"+postfix),
distMax = cms.double(0.8),
values = cms.vstring([
'userFloat("ak8PFJetsCHSPrunedMass"'+postfix+')',
'userFloat("ak8PFJetsCHSSoftDropMass"'+postfix+')',
'userFloat("NjettinessAK8'+postfix+':tau1")',
'userFloat("NjettinessAK8'+postfix+':tau2")',
'userFloat("NjettinessAK8'+postfix+':tau3")',
'pt','eta','phi','mass'
]),
valueLabels = cms.vstring( [
'ak8PFJetsCHSPrunedMass',
'ak8PFJetsCHSSoftDropMass',
'NjettinessAK8CHSTau1',
'NjettinessAK8CHSTau2',
'NjettinessAK8CHSTau3',
'pt','eta','phi','mass'
]) ),
process, task)
getattr(process,"patJetsAK8Puppi"+postfix).userData.userFloats.src += [
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'ak8PFJetsCHSPrunedMass'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'ak8PFJetsCHSSoftDropMass'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'NjettinessAK8CHSTau1'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'NjettinessAK8CHSTau2'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'NjettinessAK8CHSTau3'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'pt'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'eta'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'phi'),
cms.InputTag('ak8PFJetsCHSValueMap'+postfix,'mass'),
]
# add Njetiness
process.load('RecoJets.JetProducers.nJettinessAdder_cfi')
task.add(process.Njettiness)
addToProcessAndTask('NjettinessAK8Subjets'+postfix, process.Njettiness.clone(), process, task)
getattr(process,"NjettinessAK8Subjets"+postfix).src = cms.InputTag("ak8PFJetsPuppiSoftDrop"+postfix, "SubJets")
getattr(process,"NjettinessAK8Subjets").cone = cms.double(0.8)
## PATify CHS soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName = 'AK8PFCHSSoftDrop',
jetSource = cms.InputTag('ak8PFJetsCHSSoftDrop'+postfix),
btagDiscriminators = ['None'],
jetCorrections = ('AK8PFchs', ['L1FastJet', 'L2Relative', 'L3Absolute'], 'None'),
getJetMCFlavour = False # jet flavor disabled
)
## PATify puppi soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName = 'AK8PFPuppiSoftDrop',
jetSource = cms.InputTag('ak8PFJetsPuppiSoftDrop'+postfix),
btagDiscriminators = ['None'],
jetCorrections = ('AK8PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
getJetMCFlavour = False # jet flavor disabled
)
## PATify soft drop subjets
addJetCollection(
process,
postfix=postfix,
labelName = 'AK8PFPuppiSoftDropSubjets',
jetSource = cms.InputTag('ak8PFJetsPuppiSoftDrop'+postfix,'SubJets'),
algo = 'ak', # needed for subjet flavor clustering
rParam = 0.8, # needed for subjet flavor clustering
btagDiscriminators = ['pfDeepCSVJetTags:probb', 'pfDeepCSVJetTags:probbb', 'pfCombinedInclusiveSecondaryVertexV2BJetTags','pfCombinedMVAV2BJetTags'],
jetCorrections = ('AK4PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
explicitJTA = True, # needed for subjet b tagging
svClustering = True, # needed for subjet b tagging
genJetCollection = cms.InputTag('slimmedGenJets'),
fatJets=cms.InputTag('ak8PFJetsPuppi'), # needed for subjet flavor clustering
groomedFatJets=cms.InputTag('ak8PFJetsPuppiSoftDrop') # needed for subjet flavor clustering
)
getattr(process,"selectedPatJetsAK8PFPuppiSoftDrop"+postfix).cut = cms.string("pt > 170")
getattr(process,"patJetsAK8PFPuppiSoftDropSubjets"+postfix).userData.userFloats.src += ['NjettinessAK8Subjets'+postfix+':tau1','NjettinessAK8Subjets'+postfix+':tau2','NjettinessAK8Subjets'+postfix+':tau3']
addToProcessAndTask("slimmedJetsAK8PFPuppiSoftDropSubjets"+postfix,
cms.EDProducer("PATJetSlimmer",
src = cms.InputTag("selectedPatJetsAK8PFPuppiSoftDropSubjets"),
packedPFCandidates = cms.InputTag("packedPFCandidates"),
dropJetVars = cms.string("1"),
dropDaughters = cms.string("0"),
rekeyDaughters = cms.string("1"),
dropTrackRefs = cms.string("1"),
dropSpecific = cms.string("1"),
dropTagInfos = cms.string("1"),
modifyJets = cms.bool(True),
mixedDaughters = cms.bool(False),
modifierConfig = cms.PSet( modifications = cms.VPSet() )
),
process, task)
## Establish references between PATified fat jets and subjets using the BoostedJetMerger
addToProcessAndTask("slimmedJetsAK8PFPuppiSoftDropPacked"+postfix,
cms.EDProducer("BoostedJetMerger",
jetSrc=cms.InputTag("selectedPatJetsAK8PFPuppiSoftDrop"),
subjetSrc=cms.InputTag("slimmedJetsAK8PFPuppiSoftDropSubjets")
),
process, task )
addToProcessAndTask("packedPatJetsAK8"+postfix, cms.EDProducer("JetSubstructurePacker",
jetSrc = cms.InputTag("selectedPatJetsAK8Puppi"+postfix),
distMax = cms.double(0.8),
algoTags = cms.VInputTag(
cms.InputTag("slimmedJetsAK8PFPuppiSoftDropPacked"+postfix)
),
algoLabels = cms.vstring(
'SoftDropPuppi'
),
fixDaughters = cms.bool(True),
packedPFCandidates = cms.InputTag("packedPFCandidates"+postfix),
),
process, task)
# switch off daughter re-keying since it's done in the JetSubstructurePacker (and can't be done afterwards)
process.slimmedJetsAK8.rekeyDaughters = "0"
def applySubstructure(process, postfix=""):
task = getPatAlgosToolsTask(process)
from PhysicsTools.PatAlgos.tools.jetTools import addJetCollection
from PhysicsTools.PatAlgos.producersLayer1.jetProducer_cfi import _patJets as patJetsDefault
#add AK8
addJetCollection(
process,
postfix=postfix,
labelName='AK8',
jetSource=cms.InputTag('ak8PFJetsCHS' + postfix),
algo='AK',
rParam=0.8,
jetCorrections=('AK8PFchs',
cms.vstring(['L1FastJet', 'L2Relative',
'L3Absolute']), 'None'),
genJetCollection=cms.InputTag('slimmedGenJetsAK8'))
getattr(process, "patJetsAK8" + postfix).userData.userFloats.src = [
] # start with empty list of user floats
getattr(process, "selectedPatJetsAK8").cut = cms.string("pt > 170")
## AK8 groomed masses
from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsCHSPruned, ak8PFJetsCHSSoftDrop
addToProcessAndTask('ak8PFJetsCHSPruned' + postfix,
ak8PFJetsCHSPruned.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSSoftDrop' + postfix,
ak8PFJetsCHSSoftDrop.clone(), process, task)
from RecoJets.JetProducers.ak8PFJetsCHS_groomingValueMaps_cfi import ak8PFJetsCHSPrunedMass, ak8PFJetsCHSTrimmedMass, ak8PFJetsCHSFilteredMass, ak8PFJetsCHSSoftDropMass
addToProcessAndTask('ak8PFJetsCHSPrunedMass' + postfix,
ak8PFJetsCHSPrunedMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSTrimmedMass' + postfix,
ak8PFJetsCHSTrimmedMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSFilteredMass' + postfix,
ak8PFJetsCHSFilteredMass.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSSoftDropMass' + postfix,
ak8PFJetsCHSSoftDropMass.clone(), process, task)
getattr(process, "patJetsAK8").userData.userFloats.src += [
'ak8PFJetsCHSPrunedMass' + postfix,
'ak8PFJetsCHSSoftDropMass' + postfix
]
getattr(process, "patJetsAK8").addTagInfos = cms.bool(False)
# add Njetiness
process.load('RecoJets.JetProducers.nJettinessAdder_cfi')
task.add(process.Njettiness)
addToProcessAndTask('NjettinessAK8' + postfix, process.Njettiness.clone(),
process, task)
getattr(process,
"NjettinessAK8").src = cms.InputTag("ak8PFJetsCHS" + postfix)
getattr(process, "NjettinessAK8").cone = cms.double(0.8)
getattr(process, "patJetsAK8").userData.userFloats.src += [
'NjettinessAK8' + postfix + ':tau1',
'NjettinessAK8' + postfix + ':tau2',
'NjettinessAK8' + postfix + ':tau3'
]
#add AK8 from PUPPI
from RecoJets.JetProducers.ak4PFJets_cfi import ak4PFJetsPuppi
from RecoJets.JetProducers.ak8PFJets_cfi import ak8PFJetsPuppi
addToProcessAndTask('ak4PFJetsPuppi' + postfix, ak4PFJetsPuppi.clone(),
process, task)
addToProcessAndTask('ak8PFJetsPuppi' + postfix, ak8PFJetsPuppi.clone(),
process, task)
from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsPuppiSoftDrop
addToProcessAndTask('ak8PFJetsPuppiSoftDrop' + postfix,
ak8PFJetsPuppiSoftDrop.clone(), process, task)
getattr(
process, "ak8PFJetsPuppi"
).doAreaFastjet = True # even for standard ak8PFJets this is overwritten in RecoJets/Configuration/python/RecoPFJets_cff
#add AK8 from PUPPI
from RecoJets.JetProducers.ak4PFJets_cfi import ak4PFJetsPuppi
from RecoJets.JetProducers.ak8PFJets_cfi import ak8PFJetsPuppi, ak8PFJetsPuppiSoftDrop, ak8PFJetsPuppiConstituents, ak8PFJetsCHSConstituents
#from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsPuppi, ak8PFJetsPuppiSoftDrop, ak8PFJetsPuppiConstituents, ak8PFJetsCHSConstituents
addToProcessAndTask('ak4PFJetsPuppi' + postfix, ak4PFJetsPuppi.clone(),
process, task)
addToProcessAndTask('ak8PFJetsPuppiConstituents',
ak8PFJetsPuppiConstituents.clone(), process, task)
addToProcessAndTask('ak8PFJetsCHSConstituents',
ak8PFJetsCHSConstituents.clone(), process, task)
addToProcessAndTask('ak8PFJetsPuppi' + postfix, ak8PFJetsPuppi.clone(),
process, task)
addToProcessAndTask('ak8PFJetsPuppiSoftDrop' + postfix,
ak8PFJetsPuppiSoftDrop.clone(), process, task)
getattr(
process, "ak8PFJetsPuppi"
).doAreaFastjet = True # even for standard ak8PFJets this is overwritten in RecoJets/Configuration/python/RecoPFJets_cff
addJetCollection(
process,
postfix=postfix,
labelName='AK8Puppi',
jetSource=cms.InputTag('ak8PFJetsPuppi' + postfix),
algo='AK',
rParam=0.8,
jetCorrections=('AK8PFPuppi', cms.vstring(['L2Relative',
'L3Absolute']), 'None'),
btagDiscriminators=(
[x.value() for x in patJetsDefault.discriminatorSources] +
['pfBoostedDoubleSecondaryVertexAK8BJetTags']),
genJetCollection=cms.InputTag('slimmedGenJetsAK8'))
getattr(process, "patJetsAK8Puppi" + postfix).userData.userFloats.src = [
] # start with empty list of user floats
getattr(process,
"selectedPatJetsAK8Puppi" + postfix).cut = cms.string("pt > 170")
from RecoJets.JetAssociationProducers.j2tParametersVX_cfi import j2tParametersVX
addToProcessAndTask(
'ak8PFJetsPuppiTracksAssociatorAtVertex' + postfix,
cms.EDProducer("JetTracksAssociatorAtVertex",
j2tParametersVX.clone(coneSize=cms.double(0.8)),
jets=cms.InputTag("ak8PFJetsPuppi")), process, task)
addToProcessAndTask(
'patJetAK8PuppiCharge' + postfix,
cms.EDProducer(
"JetChargeProducer",
src=cms.InputTag("ak8PFJetsPuppiTracksAssociatorAtVertex"),
var=cms.string('Pt'),
exp=cms.double(1.0)), process, task)
## AK8 groomed masses
from RecoJets.Configuration.RecoPFJets_cff import ak8PFJetsPuppiSoftDrop
addToProcessAndTask('ak8PFJetsPuppiSoftDrop' + postfix,
ak8PFJetsPuppiSoftDrop.clone(), process, task)
from RecoJets.JetProducers.ak8PFJetsPuppi_groomingValueMaps_cfi import ak8PFJetsPuppiSoftDropMass
addToProcessAndTask('ak8PFJetsPuppiSoftDropMass' + postfix,
ak8PFJetsPuppiSoftDropMass.clone(), process, task)
getattr(process, "patJetsAK8Puppi" + postfix).userData.userFloats.src += [
'ak8PFJetsPuppiSoftDropMass' + postfix
]
getattr(process, "patJetsAK8Puppi" + postfix).addTagInfos = cms.bool(False)
# add Njetiness
addToProcessAndTask('NjettinessAK8Puppi' + postfix,
process.Njettiness.clone(), process, task)
getattr(process, "NjettinessAK8Puppi" +
postfix).src = cms.InputTag("ak8PFJetsPuppi" + postfix)
getattr(process, "NjettinessAK8Puppi").cone = cms.double(0.8)
getattr(process, "patJetsAK8Puppi").userData.userFloats.src += [
'NjettinessAK8Puppi' + postfix + ':tau1',
'NjettinessAK8Puppi' + postfix + ':tau2',
'NjettinessAK8Puppi' + postfix + ':tau3'
]
addToProcessAndTask(
"ak8PFJetsCHSValueMap" + postfix,
cms.EDProducer(
"RecoJetToPatJetDeltaRValueMapProducer",
src=cms.InputTag("ak8PFJetsPuppi" + postfix),
matched=cms.InputTag("patJetsAK8" + postfix),
distMax=cms.double(0.8),
values=cms.vstring([
'userFloat("ak8PFJetsCHSPrunedMass"' + postfix + ')',
'userFloat("ak8PFJetsCHSSoftDropMass"' + postfix + ')',
'userFloat("NjettinessAK8' + postfix + ':tau1")',
'userFloat("NjettinessAK8' + postfix + ':tau2")',
'userFloat("NjettinessAK8' + postfix + ':tau3")', 'pt', 'eta',
'phi', 'mass'
]),
valueLabels=cms.vstring([
'ak8PFJetsCHSPrunedMass', 'ak8PFJetsCHSSoftDropMass',
'NjettinessAK8CHSTau1', 'NjettinessAK8CHSTau2',
'NjettinessAK8CHSTau3', 'pt', 'eta', 'phi', 'mass'
])), process, task)
getattr(process, "patJetsAK8Puppi" + postfix).userData.userFloats.src += [
cms.InputTag('ak8PFJetsCHSValueMap' + postfix,
'ak8PFJetsCHSPrunedMass'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix,
'ak8PFJetsCHSSoftDropMass'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'NjettinessAK8CHSTau1'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'NjettinessAK8CHSTau2'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'NjettinessAK8CHSTau3'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'pt'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'eta'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'phi'),
cms.InputTag('ak8PFJetsCHSValueMap' + postfix, 'mass'),
]
# add Njetiness
process.load('RecoJets.JetProducers.nJettinessAdder_cfi')
task.add(process.Njettiness)
addToProcessAndTask('NjettinessAK8Subjets' + postfix,
process.Njettiness.clone(), process, task)
getattr(process, "NjettinessAK8Subjets" + postfix).src = cms.InputTag(
"ak8PFJetsPuppiSoftDrop" + postfix, "SubJets")
getattr(process, "NjettinessAK8Subjets").cone = cms.double(0.8)
## PATify CHS soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName='AK8PFCHSSoftDrop',
jetSource=cms.InputTag('ak8PFJetsCHSSoftDrop' + postfix),
btagDiscriminators=['None'],
jetCorrections=('AK8PFchs', ['L1FastJet', 'L2Relative',
'L3Absolute'], 'None'),
getJetMCFlavour=False # jet flavor disabled
)
## PATify puppi soft drop fat jets
addJetCollection(
process,
postfix=postfix,
labelName='AK8PFPuppiSoftDrop',
jetSource=cms.InputTag('ak8PFJetsPuppiSoftDrop' + postfix),
btagDiscriminators=['None'],
jetCorrections=('AK8PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
getJetMCFlavour=False # jet flavor disabled
)
## PATify soft drop subjets
addJetCollection(
process,
postfix=postfix,
labelName='AK8PFPuppiSoftDropSubjets',
jetSource=cms.InputTag('ak8PFJetsPuppiSoftDrop' + postfix, 'SubJets'),
algo='ak', # needed for subjet flavor clustering
rParam=0.8, # needed for subjet flavor clustering
btagDiscriminators=[
'pfDeepCSVJetTags:probb', 'pfDeepCSVJetTags:probbb',
'pfCombinedInclusiveSecondaryVertexV2BJetTags',
'pfCombinedMVAV2BJetTags'
],
jetCorrections=('AK4PFPuppi', ['L2Relative', 'L3Absolute'], 'None'),
explicitJTA=True, # needed for subjet b tagging
svClustering=True, # needed for subjet b tagging
genJetCollection=cms.InputTag('slimmedGenJets'),
fatJets=cms.InputTag(
'ak8PFJetsPuppi'), # needed for subjet flavor clustering
groomedFatJets=cms.InputTag(
'ak8PFJetsPuppiSoftDrop') # needed for subjet flavor clustering
)
getattr(process, "selectedPatJetsAK8PFPuppiSoftDrop" +
postfix).cut = cms.string("pt > 170")
getattr(process, "patJetsAK8PFPuppiSoftDropSubjets" +
postfix).userData.userFloats.src += [
'NjettinessAK8Subjets' + postfix + ':tau1',
'NjettinessAK8Subjets' + postfix + ':tau2',
'NjettinessAK8Subjets' + postfix + ':tau3'
]
addToProcessAndTask(
"slimmedJetsAK8PFPuppiSoftDropSubjets" + postfix,
cms.EDProducer(
"PATJetSlimmer",
src=cms.InputTag("selectedPatJetsAK8PFPuppiSoftDropSubjets"),
packedPFCandidates=cms.InputTag("packedPFCandidates"),
dropJetVars=cms.string("1"),
dropDaughters=cms.string("0"),
rekeyDaughters=cms.string("1"),
dropTrackRefs=cms.string("1"),
dropSpecific=cms.string("1"),
dropTagInfos=cms.string("1"),
modifyJets=cms.bool(True),
mixedDaughters=cms.bool(False),
modifierConfig=cms.PSet(modifications=cms.VPSet())), process, task)
## Establish references between PATified fat jets and subjets using the BoostedJetMerger
addToProcessAndTask(
"slimmedJetsAK8PFPuppiSoftDropPacked" + postfix,
cms.EDProducer(
"BoostedJetMerger",
jetSrc=cms.InputTag("selectedPatJetsAK8PFPuppiSoftDrop"),
subjetSrc=cms.InputTag("slimmedJetsAK8PFPuppiSoftDropSubjets")),
process, task)
addToProcessAndTask(
"packedPatJetsAK8" + postfix,
cms.EDProducer(
"JetSubstructurePacker",
jetSrc=cms.InputTag("selectedPatJetsAK8Puppi" + postfix),
distMax=cms.double(0.8),
algoTags=cms.VInputTag(
cms.InputTag("slimmedJetsAK8PFPuppiSoftDropPacked" + postfix)),
algoLabels=cms.vstring('SoftDropPuppi'),
fixDaughters=cms.bool(True),
packedPFCandidates=cms.InputTag("packedPFCandidates" + postfix),
), process, task)
# switch off daughter re-keying since it's done in the JetSubstructurePacker (and can't be done afterwards)
process.slimmedJetsAK8.rekeyDaughters = "0"