def run(self):
BOARD.setup()
parser = LoRaArgumentParser("Continous LoRa receiver.")
lora = LoRaRcvCont(verbose=False)
args = parser.parse_args(lora)
lora.set_mode(MODE.STDBY)
lora.set_pa_config(pa_select=1)
lora.set_freq(434.0)
#lora.set_rx_crc(True)
#lora.set_coding_rate(CODING_RATE.CR4_6)
#lora.set_pa_config(max_power=0, output_power=0)
#lora.set_lna_gain(GAIN.G1)
#lora.set_implicit_header_mode(False)
#lora.set_low_data_rate_optim(True)
#lora.set_pa_ramp(PA_RAMP.RAMP_50_us)
#lora.set_agc_auto_on(True)
print("lora: {0}".format(lora))
assert (lora.get_agc_auto_on() == 1)
time.sleep(1)
try:
lora.start()
except KeyboardInterrupt:
sys.stdout.flush()
print("")
sys.stderr.write("KeyboardInterrupt\n")
finally:
sys.stdout.flush()
print("")
lora.set_mode(MODE.SLEEP)
print(lora)
BOARD.teardown()
def on_fhss_change_channel(self):
print("\non_FhssChangeChannel")
print(self.get_irq_flags())
def start(self):
global args
sys.stdout.write("\rstart")
self.tx_counter = 0
BOARD.led_on()
self.write_payload([0x0f])
self.set_mode(MODE.TX)
while True:
sleep(1)
lora = LoRaBeacon(verbose=False)
args = parser.parse_args(lora)
lora.set_pa_config(pa_select=1)
#lora.set_rx_crc(True)
#lora.set_agc_auto_on(True)
#lora.set_lna_gain(GAIN.NOT_USED)
#lora.set_coding_rate(CODING_RATE.CR4_6)
#lora.set_implicit_header_mode(False)
#lora.set_pa_config(max_power=0x04, output_power=0x0F)
#lora.set_pa_config(max_power=0x04, output_power=0b01000000)
#lora.set_low_data_rate_optim(True)
#lora.set_pa_ramp(PA_RAMP.RAMP_50_us)
print(lora)
#assert(lora.get_lna()['lna_gain'] == GAIN.NOT_USED)
def start(self):
self.reset_ptr_rx()
self.set_mode(MODE.RXCONT)
while True:
sleep(.5)
rssi_value = self.get_rssi_value()
status = self.get_modem_status()
sys.stdout.flush()
sys.stdout.write(
"\r%d %d %d" %
(rssi_value, status['rx_ongoing'], status['modem_clear']))
lora = LoRaRcvCont(verbose=False)
args = parser.parse_args(lora)
lora.set_mode(MODE.STDBY)
lora.set_pa_config(pa_select=1)
lora.set_rx_crc(True)
lora.set_coding_rate(CODING_RATE.CR4_6)
lora.set_pa_config(max_power=15, output_power=15)
lora.set_lna_gain(GAIN.G1)
lora.set_implicit_header_mode(False)
lora.set_low_data_rate_optim(True)
lora.set_pa_ramp(PA_RAMP.RAMP_50_us)
lora.set_agc_auto_on(True)
#print(lora)
assert (lora.get_agc_auto_on() == 1)
self.tx_counter = 0
self.write_payload([255, 255, 0, 0, 104, 101, 108, 108, 111])
self.reset_ptr_rx()
self.set_mode(MODE.RXCONT)
while True:
sleep(.5)
rssi_value = self.get_rssi_value()
status = self.get_modem_status()
sys.stdout.flush()
sys.stdout.write(
"\r%d %d %d" %
(rssi_value, status['rx_ongoing'], status['modem_clear']))
lora = LoRaRcvCont(verbose=False)
args = parser.parse_args(lora) # configs in LoRaArgumentParser.py
lora.set_mode(MODE.STDBY)
lora.set_pa_config(pa_select=1)
assert (lora.get_agc_auto_on() == 1)
try:
print("START")
lora.start()
except KeyboardInterrupt:
sys.stdout.flush()
print("Exit")
sys.stderr.write("KeyboardInterrupt\n")
finally:
sys.stdout.flush()
def start(self):
self.read_config()
self.send()
while True:
sleep(1)
# Init
devaddr = []
nwskey = []
appskey = []
fCnt = 0
lora = LoRaWANotaa(False)
# Setup
parser.parse_args(lora)
lora.set_mode(MODE.SLEEP)
lora.set_dio_mapping([1, 0, 0, 0, 0, 0])
lora.set_freq(923.2)
lora.set_bw(7)
lora.set_spreading_factor(7)
lora.set_pa_config(pa_select=1)
lora.set_pa_config(max_power=0x0F, output_power=0x0E)
lora.set_invert_iq(0)
lora.set_sync_word(0x34)
lora.set_rx_crc(True)
#print(lora)
assert (lora.get_agc_auto_on() == 1)
try: