Ejemplo n.º 1
0
    def processDhcpdConfFile():
        entry("Opening DHCPD Config file")
        try:
            # Read the source dhcpd.conf configuration file
            dhcpConFileLocation = str(config.get("base", "dhcpdConfigFile"))
            # Open the file
            dhcpConFile = open(dhcpConFileLocation, mode='r')
            # Read in the output directory
            dnsmasqConfDir = str(config.get("base", "dnsmasqConfigDir"))
            # Read in the output file name
            dnsmasqDHCPFileName = str(config.get("base",
                                                 "dhcpDnsmasqConfFile"))
            # Check the path and create it if it doesn't exist
            if not os.path.isdir(dnsmasqConfDir):
                log2("Log directory %s does not exist" % dnsmasqConfDir)
                try:
                    os.mkdir(dnsmasqConfDir)
                except:
                    handleException("Unable to create log directory")
                    raise
            # Double check to make sure the directory exists
            if not os.path.isdir(dnsmasqConfDir):
                log2("%s is not a directory" % dnsmasqConfDir)
                raise
            # Since it must certainly exist now let's make sure it's writable
            if not os.access(dnsmasqConfDir, os.W_OK):
                print "Directory %s is not writable" % dnsmasqConfDir
                raise
            # Join the Directory and filename so that we can open the file for writing
            dnsmasqDHCPFile = os.path.join(dnsmasqConfDir, dnsmasqDHCPFileName)
            # While we have the file open for writing keep writing to it.  We use the with statement so if the
            # script crashes it will close the file cleanly first flushing the buffers.
            with open(dnsmasqDHCPFile, mode='w') as dnsmasqConf:
                #While we have the file open for reading and keep it open until we are done with it.
                with open(dhcpConFileLocation, mode='r') as dhcpConFile:
                    count = 0
                    for line in dhcpConFile:
                        # Look for Host Entries
                        if line.__contains__("host") and line.__contains__(
                                "{"):
                            splitline = line.split()
                            name = str(splitline[1])
                            count = count + 1
                        # Look for MAC Address
                        if line.__contains__("ethernet"):
                            splitline = line.split()
                            macaddress = str(splitline[2].strip(";"))
                        # Look for the assigned IP Address
                        if line.__contains__("fixed-address"):
                            splitline = line.split()
                            ipaddress = str(splitline[1].strip(";"))
                        # Look for the ending } and place the entry into the output file
                        if line.__contains__("}") and count > 0:
                            dnsmasqConf.write("dhcp-host=%s,%s,%s\n" %
                                              (name, macaddress, ipaddress))
                            count = 0
                        if line.__contains__("default-lease-time"):
                            maxLease = line.split()
                            dnsmasqConf.write("dhcp-lease-max=%s\n" %
                                              (maxLease[1].strip().strip(";")))
                        if line.__contains__("ntp-servers"):
                            ntpServers = line.split()
                            dnsmasqConf.write(
                                "dhcp-option=option:ntp-server,%s\n" %
                                (ntpServers[2].strip(";")))
                        if line.__contains__("routes"):
                            routes = line.split()
                            dnsmasqConf.write(
                                "dhcp-option=121,%s/255.255.255.0" %
                                (routes[2]))

        except:
            handleException("openDhcpdConfFile")
            raise
Ejemplo n.º 2
0
 def processBindNamedconfFile():
     entry("Opening named.conf Config file")
     try:
         # Read the source dhcpd.conf configuration file
         bindNamedConFileLocation = str(config.get("base", "bindNamedConf"))
         # Open the file
         namedConFile = open(bindNamedConFileLocation, mode='r')
         # Read in the output directory
         dnsmasqConfDir = str(config.get("base", "dnsmasqConfigDir"))
         dnsmasqBaseDir = str(config.get("base", "dnsmasqBaseDir"))
         dnsmasqDataDir = str(config.get("base", "dnsmasqDataDir"))
         dnsmaqConfigDataDir = str(config.get("base",
                                              "dnsmaqConfigDataDir"))
         # Read in the output file name
         dnsmasqDNSFileName = str(config.get("base", "DNSDnsmasqConfFile"))
         dnsmasqHostsFileName = str(
             config.get("base", "DNSDnsmasqHostsFile"))
         dnsmasqHostsFile = os.path.join(dnsmaqConfigDataDir,
                                         dnsmasqHostsFileName)
         # Check the path and create it if it doesn't exist
         if not os.path.isdir(dnsmasqConfDir):
             print "Log directory %s does not exist" % dnsmasqConfDir
             try:
                 os.mkdir(dnsmasqConfDir)
             except:
                 print "Unable to create log directory"
                 return
         # Double check to make sure the directory exists
         if not os.path.isdir(dnsmasqConfDir):
             print "%s is not a directory" % dnsmasqConfDir
             return
         # Since it must certainly exist now let's make sure it's writable
         if not os.access(dnsmasqConfDir, os.W_OK):
             print "Directory %s is not writable" % dnsmasqConfDir
             return
         if not os.path.isdir(dnsmaqConfigDataDir):
             print "Log directory %s does not exist" % dnsmaqConfigDataDir
             try:
                 os.mkdir(dnsmaqConfigDataDir)
             except:
                 print "Unable to create dnsmaq Config Data Dir directory"
                 return
         # Double check to make sure the directory exists
         if not os.path.isdir(dnsmaqConfigDataDir):
             print "%s is not a directory" % dnsmaqConfigDataDir
             return
         # Since it must certainly exist now let's make sure it's writable
         if not os.access(dnsmaqConfigDataDir, os.W_OK):
             print "Directory %s is not writable" % dnsmaqConfigDataDir
             return
         # Join the Directory and filename so that we can open the file for writing
         dnsmasqDHCPFile = os.path.join(dnsmasqConfDir, dnsmasqDNSFileName)
         # While we have the file open for writing keep writing to it.  We use the with statement so if the
         # script crashes it will close the file cleanly first flushing the buffers.
         with open(dnsmasqDHCPFile, mode='w') as dnsmasqConf:
             #While we have the file open for reading and keep it open until we are done with it.
             with open(bindNamedConFileLocation, mode='r') as dnsConFile:
                 count = 0
                 DNSDataFiles = {}
                 for line in dnsConFile:
                     # Look for zone Entries
                     if line.__contains__("zone") and line.__contains__(
                             "{"):
                         splitline = line.split()
                         name = str(splitline[1].strip("\""))
                         count = count + 1
                     if line.__contains__("file") and count > 0:
                         splitline = line.split()
                         filename = splitline[1].strip("\"").strip(
                             ";").strip("\"")
                         if len(name) > 2 and not name.__contains__(
                                 "localhost") and not name.__contains__(
                                     "in-addr.arpa"):
                             print("Zone Name: %s \t File Name: %s\n" %
                                   (name, filename))
                             DNSDataFiles[name] = filename
             hostsfileName = dnsmasqDataDir + "/" + dnsmasqHostsFileName
             dnsmasqConf.write("addn-hosts=" + hostsfileName)
             with open(dnsmasqHostsFile, mode='w') as dnsmasqHostsConf:
                 for name in DNSDataFiles.keys():
                     splitFileName = DNSDataFiles[name].split('/')
                     DNSDataFiles[name] = os.path.join(
                         "../dns_configurations/bind/named",
                         splitFileName[3])
                     print("%s %s" % (name, DNSDataFiles[name]))
                     with open(DNSDataFiles[name], mode='r') as domainFile:
                         for line in domainFile:
                             if not line.startswith("#"):
                                 InAString = re.compile("IN\sA")
                                 if InAString.search(line):
                                     log2(line)
                                     splitline = line.split()
                                     log2(("Writing %s\t%s to %s\n") %
                                          (splitline[3], splitline[0],
                                           dnsmasqHostsConf))
                                     dnsmasqHostsConf.write(
                                         ("%s\t%s\n") %
                                         (splitline[3], splitline[0]))
     except:
         handleException("openDhcpdConfFile")
         raise
Ejemplo n.º 3
0
__author__ = 'bwagner'
import os
from ConfigParser import SafeConfigParser
from ScriptLog import log, log2, closeLog, error, warning, info, debug, entry, exit, lopen, handleException

try:
    config = SafeConfigParser()
    config.read('./Configuration/base.cfg')
    logFileDir = str(config.get("base", "logDir"))
    logFile = str(config.get("base", 'dhcpTodnsmasqLogFile'))
    lopen(logFile, logFileDir)
    entry("Entering dhcpTodnsmasq.init")

    exit("Exiting dhcpTodnsmasq.init")
except:
    handleException("dhcpTodnsmasq.init")
    raise


class convertDhcpdTodnsmasqconf:
    def __init__(self):
        pass

    def processDhcpdConfFile():
        entry("Opening DHCPD Config file")
        try:
            # Read the source dhcpd.conf configuration file
            dhcpConFileLocation = str(config.get("base", "dhcpdConfigFile"))
            # Open the file
            dhcpConFile = open(dhcpConFileLocation, mode='r')
            # Read in the output directory
Ejemplo n.º 4
0
import os
from ConfigParser import SafeConfigParser
from ScriptLog import log, log2, closeLog, error, warning, info, debug, entry, exit, lopen, handleException
import re

try:
    config = SafeConfigParser()
    config.read('./Configuration/base.cfg')
    logFileDir = str(config.get("base", "logDir"))
    logFile = str(config.get("base", 'bindTodnsmasqLogFile'))
    lopen(logFile, logFileDir)
    entry("Entering bindTodnsmasq.init")

    exit("Exiting bindTodnsmasq.init")
except:
    handleException("bindTodnsmasq.init")
    raise


class convertBindTodnsmasqconf:
    def __init__(self):
        pass

    def processBindNamedconfFile():
        entry("Opening named.conf Config file")
        try:
            # Read the source dhcpd.conf configuration file
            bindNamedConFileLocation = str(config.get("base", "bindNamedConf"))
            # Open the file
            namedConFile = open(bindNamedConFileLocation, mode='r')
            # Read in the output directory
Ejemplo n.º 5
0
    def processDhcpdConfFile():
        entry("Opening DHCPD Config file")
        try:
            # Read the source dhcpd.conf configuration file
            dhcpConFileLocation = str(config.get("base", "dhcpdConfigFile"))
            # Open the file
            dhcpConFile = open(dhcpConFileLocation, mode="r")
            # Read in the output directory
            dnsmasqConfDir = str(config.get("base", "dnsmasqConfigDir"))
            # Read in the output file name
            dnsmasqDHCPFileName = str(config.get("base", "dhcpDnsmasqConfFile"))
            # Check the path and create it if it doesn't exist
            if not os.path.isdir(dnsmasqConfDir):
                log2("Log directory %s does not exist" % dnsmasqConfDir)
                try:
                    os.mkdir(dnsmasqConfDir)
                except:
                    handleException("Unable to create log directory")
                    raise
            # Double check to make sure the directory exists
            if not os.path.isdir(dnsmasqConfDir):
                log2("%s is not a directory" % dnsmasqConfDir)
                raise
            # Since it must certainly exist now let's make sure it's writable
            if not os.access(dnsmasqConfDir, os.W_OK):
                print "Directory %s is not writable" % dnsmasqConfDir
                raise
            # Join the Directory and filename so that we can open the file for writing
            dnsmasqDHCPFile = os.path.join(dnsmasqConfDir, dnsmasqDHCPFileName)
            # While we have the file open for writing keep writing to it.  We use the with statement so if the
            # script crashes it will close the file cleanly first flushing the buffers.
            with open(dnsmasqDHCPFile, mode="w") as dnsmasqConf:
                # While we have the file open for reading and keep it open until we are done with it.
                with open(dhcpConFileLocation, mode="r") as dhcpConFile:
                    count = 0
                    for line in dhcpConFile:
                        # Look for Host Entries
                        if line.__contains__("host") and line.__contains__("{"):
                            splitline = line.split()
                            name = str(splitline[1])
                            count = count + 1
                        # Look for MAC Address
                        if line.__contains__("ethernet"):
                            splitline = line.split()
                            macaddress = str(splitline[2].strip(";"))
                        # Look for the assigned IP Address
                        if line.__contains__("fixed-address"):
                            splitline = line.split()
                            ipaddress = str(splitline[1].strip(";"))
                        # Look for the ending } and place the entry into the output file
                        if line.__contains__("}") and count > 0:
                            dnsmasqConf.write("dhcp-host=%s,%s,%s\n" % (name, macaddress, ipaddress))
                            count = 0
                        if line.__contains__("default-lease-time"):
                            maxLease = line.split()
                            dnsmasqConf.write("dhcp-lease-max=%s\n" % (maxLease[1].strip().strip(";")))
                        if line.__contains__("ntp-servers"):
                            ntpServers = line.split()
                            dnsmasqConf.write("dhcp-option=option:ntp-server,%s\n" % (ntpServers[2].strip(";")))
                        if line.__contains__("routes"):
                            routes = line.split()
                            dnsmasqConf.write("dhcp-option=121,%s/255.255.255.0" % (routes[2]))

        except:
            handleException("openDhcpdConfFile")
            raise
Ejemplo n.º 6
0
__author__ = "bwagner"
import os
from ConfigParser import SafeConfigParser
from ScriptLog import log, log2, closeLog, error, warning, info, debug, entry, exit, lopen, handleException

try:
    config = SafeConfigParser()
    config.read("./Configuration/base.cfg")
    logFileDir = str(config.get("base", "logDir"))
    logFile = str(config.get("base", "dhcpTodnsmasqLogFile"))
    lopen(logFile, logFileDir)
    entry("Entering dhcpTodnsmasq.init")

    exit("Exiting dhcpTodnsmasq.init")
except:
    handleException("dhcpTodnsmasq.init")
    raise


class convertDhcpdTodnsmasqconf:
    def __init__(self):
        pass

    def processDhcpdConfFile():
        entry("Opening DHCPD Config file")
        try:
            # Read the source dhcpd.conf configuration file
            dhcpConFileLocation = str(config.get("base", "dhcpdConfigFile"))
            # Open the file
            dhcpConFile = open(dhcpConFileLocation, mode="r")
            # Read in the output directory
Ejemplo n.º 7
0
 def processBindNamedconfFile( ):
     entry("Opening named.conf Config file")
     try:
         # Read the source dhcpd.conf configuration file
         bindNamedConFileLocation = str( config.get("base","bindNamedConf"))
         # Open the file
         namedConFile = open(bindNamedConFileLocation,mode='r')
         # Read in the output directory
         dnsmasqConfDir = str(config.get("base","dnsmasqConfigDir"))
         dnsmasqBaseDir = str(config.get("base","dnsmasqBaseDir"))
         dnsmasqDataDir = str(config.get("base","dnsmasqDataDir"))
         dnsmaqConfigDataDir = str(config.get("base","dnsmaqConfigDataDir"))
         # Read in the output file name
         dnsmasqDNSFileName = str(config.get("base","DNSDnsmasqConfFile"))
         dnsmasqHostsFileName= str(config.get("base","DNSDnsmasqHostsFile"))
         dnsmasqHostsFile= os.path.join(dnsmaqConfigDataDir,dnsmasqHostsFileName)
         # Check the path and create it if it doesn't exist
         if not os.path.isdir( dnsmasqConfDir ):
             print "Log directory %s does not exist" % dnsmasqConfDir
             try:
                 os.mkdir( dnsmasqConfDir )
             except:
                 print "Unable to create log directory"
                 return
         # Double check to make sure the directory exists
         if not os.path.isdir( dnsmasqConfDir ):
             print "%s is not a directory" % dnsmasqConfDir
             return
         # Since it must certainly exist now let's make sure it's writable
         if not os.access( dnsmasqConfDir, os.W_OK ):
             print "Directory %s is not writable" % dnsmasqConfDir
             return
         if not os.path.isdir( dnsmaqConfigDataDir ):
             print "Log directory %s does not exist" % dnsmaqConfigDataDir
             try:
                 os.mkdir( dnsmaqConfigDataDir )
             except:
                 print "Unable to create dnsmaq Config Data Dir directory"
                 return
         # Double check to make sure the directory exists
         if not os.path.isdir( dnsmaqConfigDataDir ):
             print "%s is not a directory" % dnsmaqConfigDataDir
             return
         # Since it must certainly exist now let's make sure it's writable
         if not os.access( dnsmaqConfigDataDir, os.W_OK ):
             print "Directory %s is not writable" % dnsmaqConfigDataDir
             return
         # Join the Directory and filename so that we can open the file for writing
         dnsmasqDHCPFile = os.path.join( dnsmasqConfDir , dnsmasqDNSFileName )
         # While we have the file open for writing keep writing to it.  We use the with statement so if the
         # script crashes it will close the file cleanly first flushing the buffers.
         with open(dnsmasqDHCPFile,mode='w') as dnsmasqConf:
             #While we have the file open for reading and keep it open until we are done with it.
             with open(bindNamedConFileLocation,mode='r') as dnsConFile:
                 count = 0
                 DNSDataFiles={}
                 for line in dnsConFile:
                     # Look for zone Entries
                     if line.__contains__("zone") and line.__contains__("{"):
                         splitline = line.split()
                         name = str(splitline[1].strip("\""))
                         count =count + 1
                     if line.__contains__("file") and count > 0:
                         splitline=line.split()
                         filename=splitline[1].strip("\"").strip(";").strip("\"")
                         if len(name) > 2 and not name.__contains__("localhost") and not name.__contains__("in-addr.arpa"):
                             print ("Zone Name: %s \t File Name: %s\n" % (name,filename))
                             DNSDataFiles[name] = filename
             hostsfileName = dnsmasqDataDir + "/" + dnsmasqHostsFileName
             dnsmasqConf.write("addn-hosts=" + hostsfileName)
             with open(dnsmasqHostsFile,mode='w') as dnsmasqHostsConf:
                 for name in DNSDataFiles.keys():
                     splitFileName = DNSDataFiles[name].split('/')
                     DNSDataFiles[name] = os.path.join("../dns_configurations/bind/named",splitFileName[3])
                     print ("%s %s" % (name,DNSDataFiles[name]))
                     with open(DNSDataFiles[name],mode='r') as domainFile:
                         for line in domainFile:
                             if not line.startswith("#"):
                                 InAString = re.compile("IN\sA")
                                 if InAString.search(line):
                                     log2(line)
                                     splitline = line.split()
                                     log2(("Writing %s\t%s to %s\n") % (splitline[3],splitline[0],dnsmasqHostsConf))
                                     dnsmasqHostsConf.write(("%s\t%s\n") % (splitline[3],splitline[0]))
     except:
         handleException("openDhcpdConfFile")
         raise
Ejemplo n.º 8
0
import os
from ConfigParser import SafeConfigParser
from ScriptLog import log, log2, closeLog, error, warning, info, debug, entry, exit, lopen, handleException
import re

try:
    config = SafeConfigParser()
    config.read( './Configuration/base.cfg' )
    logFileDir = str( config.get( "base", "logDir" ) )
    logFile = str( config.get( "base", 'bindTodnsmasqLogFile') )
    lopen( logFile, logFileDir )
    entry( "Entering bindTodnsmasq.init" )

    exit( "Exiting bindTodnsmasq.init" )
except:
    handleException( "bindTodnsmasq.init" )
    raise

class convertBindTodnsmasqconf:

    def __init__ ( self ):
        pass

    def processBindNamedconfFile( ):
        entry("Opening named.conf Config file")
        try:
            # Read the source dhcpd.conf configuration file
            bindNamedConFileLocation = str( config.get("base","bindNamedConf"))
            # Open the file
            namedConFile = open(bindNamedConFileLocation,mode='r')
            # Read in the output directory