def teleMir_CB():
streamhandler = StreamHandler()
# Configure and start
dev = EmotivMultiSignals(streamhandler = streamhandler)
dev.configure(buffer_length = 1800, # doit être un multiple du packet size
device_path = '',)
dev.initialize()
dev.start()
## Configure and start output stream (for extracted feature)
fout = TransmitFeatures(streamhandler = streamhandler)
fout.configure(# name = 'Test fout',
nb_channel = 14, # np.array([1:5])
nb_feature = 4,
nb_pts = 128,
sampling_rate =10.,
buffer_length = 10.,
packet_size = 1,
)
fout.initialize(stream_in = dev.streams[0])
fout.start()
app = QtGui.QApplication([])
#impédances
w_imp=Topoplot(stream = dev.streams[1], type_Topo = 'imp')
w_imp.show()
w_oscilo=Oscilloscope(stream = dev.streams[1])
w_oscilo.show()
app.exec_()
# Stope and release the device
fout.stop()
fout.close()
dev.stop()
dev.close()
def teleMir_CB():
streamhandler = StreamHandler()
# Configure and start
#~ dev = FakeMultiSignals(streamhandler = streamhandler)
#~ dev.configure( #name = 'Test dev',
#~ nb_channel = 14,
#~ sampling_rate =128.,
#~ buffer_length = 10.,
#~ packet_size = 1,
#~ )
#~ dev.initialize()
#~ dev.start()
filename = '/home/ran/Projets/pyacq_emotiv_recording/alex/Emotiv Systems Pty Ltd #SN201105160008860.raw'
#filename = '/home/ran/Projets/pyacq_emotiv_recording/caro/Emotiv Systems Pty Ltd #SN201105160008860.raw'
#filename = '/home/mini/pyacq_emotiv_recording/simple_blink/Emotiv Systems Pty Ltd #SN201105160008860.raw'
filenameImp = '/home/ran/Projets/EEG_recordings/anneLise/Emotiv Systems Pty Ltd #SN200709276578911.raw'
filenameXY = '/home/ran/Projets/EEG_recordings/anneLise/Emotiv Systems Pty Ltd #SN200709276578912.raw'
precomputed = np.fromfile(filename , dtype = np.float32).reshape(-1, 14).transpose()
precomputedImp = np.fromfile(filenameImp , dtype = np.float32).reshape(-1, 14).transpose()
precomputedXY = np.fromfile(filenameXY , dtype = np.float32).reshape(-1, 2).transpose()
# Configure and start signal
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( #name = 'Test dev',
nb_channel = 14,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputed,
)
dev.initialize()
dev.start()
#~ # Configure and start imp
#~ devImp = FakeMultiSignals(streamhandler = streamhandler)
#~ devImp.configure( #name = 'Test dev',
#~ nb_channel = 14,
#~ sampling_rate =128.,
#~ buffer_length = 30.,
#~ packet_size = 1,
#~ precomputed = precomputedImp,
#~ )
#~ devImp.initialize()
#~ devImp.start()
# Configure and start gyroXY
devXY = FakeMultiSignals(streamhandler = streamhandler)
devXY.configure( #name = 'Test dev',
nb_channel = 2,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputedXY,
)
devXY.initialize()
devXY.start()
## Configure and start output stream (for extracted feature)
fout = TransmitFeatures(streamhandler = streamhandler)
fout.configure( #name = 'Test fout',
nb_channel = 14, # np.array([1:5])
nb_feature = 6,
nb_pts = 128,
sampling_rate =10.,
buffer_length = 10.,
packet_size = 1,
)
fout.initialize(stream_in = dev.streams[0], stream_xy = devXY.streams[0])
fout.start()
#Osc server
#p = Process(target=., args=('bob',))
#color = 'summer'
# Bleu
#color = 'jet'
# Rouge
color = 'hot'
# vert/jaune
#color = 'summer'
app = QtGui.QApplication([])
# Impedances
w_imp=Topoplot_imp(stream = dev.streams[0], type_Topo= 'imp')
w_imp.show()
# freqbands
w_sp_bd=freqBandsGraphics(stream = dev.streams[0], interval_length = 3., channels = [12])
w_sp_bd.run()
# signal
w_oscilo=Oscilloscope(stream = dev.streams[0])
w_oscilo.show()
w_oscilo.set_params(xsize = 10, mode = 'scroll')
w_oscilo.auto_gain_and_offset(mode = 2)
w_oscilo.gain_zoom(100)
#w_oscilo.set_params(colors = 'jet')
select_chan = np.ones(14, dtype = bool)
w_oscilo.automatic_color(cmap_name = 'jet', selected = select_chan)
# parametres
w_feat1=Oscilloscope_f(stream = fout.streams[0])
w_feat1.show()
w_feat1.set_params(colormap = color)
#w_feat1.auto_gain_and_offset(mode = 1)
#w_feat1.set_params(xsize = 10, mode = 'scroll')
#~ select_feat = np.ones(6, dtype = bool)
#~ # print select
#~ #w_oscilo.set_params(colormap = 'automn', selected = select)
#~ w_feat1.automatic_color(cmap_name = 'jet', selected = select_feat)
w_feat1.showFullScreen()
w_feat1.set_params(xsize = 10, mode = 'scroll')
#~ select_feat = np.ones(4, dtype = bool)
#~ w_feat1.automatic_color(cmap_name = 'jet', selected = select_feat)
# topographie
w_topo=Topoplot(stream = dev.streams[0], type_Topo= 'topo')
w_topo.show()
# temps frequence 1
w_Tf=TimeFreq(stream = dev.streams[0])
w_Tf.show()
w_Tf.set_params(xsize = 10)
w_Tf.change_param_tfr(f_stop = 45, f0 = 1)
w_Tf.set_params(colormap = color)
#w_Tf.clim_changed(20)
#w_Tf.change_param_channel(clim = 20)
# temps frequence 2
w_Tf2=TimeFreq2(stream = dev.streams[0])
w_Tf2.show()
w_Tf2.set_params(xsize = 10)
w_Tf2.change_param_tfr(f_stop = 45, f0 = 1)
w_Tf2.set_params(colormap = color)
# kurtosis
#w_ku=KurtosisGraphics(stream = dev.streams[0], interval_length = 1.)
#w_ku.run()
## Bien moins fluide
# Spectre
#~ w_sp=SpectrumGraphics(dev.streams[0],3.,channels=[11,12])
#~ w_sp.run()
w1 = spaceShipLauncher(dev.streams[0])
w1.run()
w1.showFullScreen()
app.exec_()
# Stope and release the device
fout.stop()
fout.close()
print 'ici'
dev.stop()
dev.close()
print 'ici'
devXY.stop()
devXY.close()
print 'ici'
devImp.stop()
devImp.close()
print 'ici'
class TeleMir_Vol:
def __init__(self):
self.streamhandler = StreamHandler()
## Configure and start acquisition
self.dev = EmotivMultiSignals(streamhandler = self.streamhandler)
self.dev.configure(buffer_length = 1800)
self.dev.initialize()
self.dev.start()
## Configure and start output stream (for extracted feature)
self.fout = TransmitFeatures(streamhandler = self.streamhandler)
self.fout.configure( #name = 'Test fout',
nb_channel = 14, # np.array([1:5])
nb_feature = 6,
nb_pts = 128,
sampling_rate =10.,
buffer_length = 10.,
packet_size = 1,
)
self.fout.initialize(stream_in = self.dev.streams[0], stream_xy = self.dev.streams[2])
self.fout.start()
self.screensize = np.array((1920))
# Impedances
self.w_imp=Topoplot_imp(stream = self.dev.streams[0], type_Topo = 'imp')
self.w_imp.show()
# signal
numscreen = 1
self.w_oscilo=Oscilloscope(stream = self.dev.streams[0])
self.w_oscilo.auto_gain_and_offset(mode = 2)
self.w_oscilo.set_params(xsize = 10, mode = 'scroll')
self.w_oscilo.automatic_color('jet')
self.w_oscilo.move(self.screensize + (numscreen-1) * 800 ,200)
#~ self.w_oscilo.setWindowFlags(QtCore.Qt.CustomizeWindowHint)
self.w_oscilo.show()
#parametres
numscreen = 2
self.w_feat1=Oscilloscope(stream = self.fout.streams[0])
self.w_feat1.auto_gain_and_offset(mode = 0)
self.w_feat1.set_params(xsize = 10, mode = 'scroll')
self.w_feat1.set_params(colors = [[0, 0, 255], [255, 0, 255], [255, 0 ,0], [255, 255, 0], [0, 255, 0], [0, 255, 255]])
self.w_feat1.set_params(ylims = [0,100])
self.w_feat1.move(self.screensize + (numscreen-1) * 800 ,200)
#~ self.w_feat1.setWindowFlags(QtCore.Qt.CustomizeWindowHint)
self.w_feat1.show()
#topo
numscreen = 3
self.w_topo=Topoplot(stream = self.dev.streams[0], type_Topo = 'topo')
self.w_topo.move(self.screensize + (numscreen-1) * 800 ,200)
self.w_topo.show()
# giro
#~ self.w_xy=Oscilloscope(stream = self.devXY.streams[0])
#~ self.w_xy.show()
#~ self.w_xy.auto_gain_and_offset(mode = 1)
#~ self.w_xy.set_params(xsize = 10, mode = 'scroll')
# temps frequence
numscreen = 4
self.w_Tf=TimeFreq(stream = self.dev.streams[0])
self.w_Tf.set_params(xsize = 10)
self.w_Tf.change_param_tfr(f_stop = 45, f0 = 1)
self.w_Tf.move(self.screensize + (numscreen-1) * 800 ,200)
self.w_Tf.setWindowFlags(QtCore.Qt.CustomizeWindowHint)
self.w_Tf.show()
numscreen = 5
# self.w_Tf2=TimeFreq2(stream = self.dev.streams[0])
# self.w_Tf2.set_params(xsize = 10)
# self.w_Tf2.change_param_tfr(f_stop = 45, f0 = 1)
# self.w_Tf2.move(self.screensize + (numscreen-1) * 800 ,200)
# self.w_Tf2.setWindowFlags(QtCore.Qt.CustomizeWindowHint)
# self.w_Tf2.show()
#w_Tf.change_param_channel(clim = 20)
#~ # freqbands
numscreen = 6 # dans le code
self.w_sp_bd=freqBandsGraphics(stream = self.dev.streams[0], interval_length = 3., channels = [11])
self.w_sp_bd.run()
def close(self):
#close windows
self.w_imp.close()
self.w_oscilo.close()
self.w_feat1.close()
self.w_topo.close()
#~ self.w_xy.close()
self.w_Tf.close()
self.w_Tf2.close()
#~ self.w_sp_bd.close()
# Stope and release the device
self.fout.stop()
self.fout.close()
self.dev.stop()
self.dev.close()
def teleMir_CB():
streamhandler = StreamHandler()
# Configure and start
dev = EmotivMultiSignals(streamhandler=streamhandler)
dev.configure(buffer_length=1800, device_path="") # doit être un multiple du packet size
dev.initialize()
dev.start()
## Configure and start output stream (for extracted feature)
fout = TransmitFeatures(streamhandler=streamhandler)
fout.configure( # name = 'Test fout',
nb_channel=14, # np.array([1:5])
nb_feature=6,
nb_pts=128,
sampling_rate=10.0,
buffer_length=10.0,
packet_size=1,
)
fout.initialize(stream_in=dev.streams[0], stream_xy=dev.streams[2])
fout.start()
# 1 : Rouge
# ~ color = 'hot'
# 2 : vert/jaune
# ~ color = 'summer'
# 3 : Bleu
color = "jet"
app = QtGui.QApplication([])
# Impedances
w_imp = Topoplot_imp(stream=dev.streams[1], type_Topo="imp")
w_imp.show()
# freqbands
w_sp = freqBandsGraphics(stream=dev.streams[0], interval_length=1.0, channels=[12])
w_sp.run()
# spaceship
# ~ w_spsh=spaceShipLauncher(dev.streams[2], cubeColor = color)
# ~ w_spsh.run()
# signal
w_oscilo = Oscilloscope(stream=dev.streams[0])
w_oscilo.show()
w_oscilo.auto_gain_and_offset(mode=2)
# w_oscilo.gain_zoom(10)
w_oscilo.set_params(xsize=10, mode="scroll")
select_chan = np.ones(14, dtype=bool)
w_oscilo.automatic_color(cmap_name="jet", selected=select_chan)
# parametres
w_feat1 = Oscilloscope_f(stream=fout.streams[0])
w_feat1.show()
w_feat1.set_params(xsize=10, mode="scroll")
select_feat = np.ones(6, dtype=bool)
w_feat1.automatic_color(cmap_name="jet", selected=select_feat)
# topographie
w_topo = Topoplot(stream=dev.streams[0], type_Topo="topo")
w_topo.show()
# temps frequence 1
w_Tf1 = TimeFreq(stream=dev.streams[0])
w_Tf1.show()
w_Tf1.set_params(xsize=10)
w_Tf1.set_params(colormap=color)
w_Tf1.change_param_tfr(f_stop=45, f0=1)
# temps frequence 2
w_Tf2 = TimeFreq2(stream=dev.streams[0])
w_Tf2.show()
w_Tf2.set_params(xsize=10)
w_Tf2.change_param_tfr(f_stop=45, f0=1)
w_Tf2.set_params(colormap=color)
# ~ timer = QTimer()
# ~ timer.setInterval(3000) # 5 seconds
# ~ timer.start()
# ~ timer.timeout.connect(app.quit)
app.exec_()
# app.startTimer(2000)
# Stope and release the device
fout.stop()
fout.close()
dev.stop()
dev.close()