def TRITFI():
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
nzs = CPlot.getSelectedZones()
if len(nzs) == 0:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
surf = getSurfaces()
zones = []
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
z = CTK.t[2][nob][2][noz]
z = C.convertBAR2Struct(z)
zones.append(z)
if len(zones) != 3:
CTK.TXT.insert('START', 'TRI TFI takes 3 contours.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
coords1 = C.getFields(Internal.__GridCoordinates__, zones[0])[0]
coords2 = C.getFields(Internal.__GridCoordinates__, zones[1])[0]
coords3 = C.getFields(Internal.__GridCoordinates__, zones[2])[0]
[m1, m2, m3] = trimesh(coords1, coords2, coords3)
if (m1 == 0):
CTK.TXT.insert('START', m2 + '\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
m1 = C.convertArrays2ZoneNode('TFI1', [m1])
m2 = C.convertArrays2ZoneNode('TFI2', [m2])
m3 = C.convertArrays2ZoneNode('TFI3', [m3])
if surf != []:
m1 = T.projectOrthoSmooth(m1, surf)
m2 = T.projectOrthoSmooth(m2, surf)
m3 = T.projectOrthoSmooth(m3, surf)
CTK.saveTree()
CTK.t = C.addBase2PyTree(CTK.t, 'MESHES')
bases = Internal.getNodesFromName1(CTK.t, 'MESHES')
nob = C.getNobOfBase(bases[0], CTK.t)
for i in [m1, m2, m3]:
CTK.add(CTK.t, nob, -1, i)
CTK.TXT.insert('START', 'TRI-TFI mesh created.\n')
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
def drawCubic(npts):
global CURRENTZONE; global CURRENTPOLYLINE
if (CTK.t == []): return
w = WIDGETS['draw']
if (CTK.__BUSY__ == False):
CPlot.unselectAllZones()
CTK.saveTree()
CTK.__BUSY__ = True
TTK.sunkButton(w)
CPlot.setState(cursor=1)
while (CTK.__BUSY__ == True):
l = []
while (l == []):
l = CPlot.getActivePoint()
CPlot.unselectAllZones()
time.sleep(CPlot.__timeStep__)
w.update()
if (CTK.__BUSY__ == False): break
if (CTK.__BUSY__ == True):
CURRENTPOLYLINE.append((l[0],l[1],l[2]))
if (CURRENTZONE == None):
CTK.t = C.addBase2PyTree(CTK.t, 'CONTOURS', 1)
base = Internal.getNodeFromName1(CTK.t, 'CONTOURS')
nob = C.getNobOfBase(base, CTK.t)
a = D.polyline(CURRENTPOLYLINE)
CURRENTZONE = a
CTK.add(CTK.t, nob, -1, a)
ret = Internal.getParentOfNode(CTK.t, CURRENTZONE)
noz = ret[1]
else:
a = D.polyline(CURRENTPOLYLINE)
CURRENTZONE = a
CTK.replace(CTK.t, nob, noz, a)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
else:
CTK.__BUSY__ = False
ret = Internal.getParentOfNode(CTK.t, CURRENTZONE)
a = D.polyline(CURRENTPOLYLINE)
d = G.cart( (0,0,0), (1./(npts-1),1,1), (npts,1,1) )
a = G.map(a, d)
surfaces = getSurfaces()
if (surfaces != []): a = T.projectOrthoSmooth(a, surfaces)
nob = C.getNobOfBase(ret[0], CTK.t)
CTK.replace(CTK.t, nob, ret[1], a)
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
CURRENTZONE = None
CURRENTPOLYLINE = []
TTK.raiseButton(w)
CPlot.setState(cursor=0)
def MONO2TFI():
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
nzs = CPlot.getSelectedZones()
if len(nzs) == 0:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
surf = getSurfaces()
zones = []
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
z = CTK.t[2][nob][2][noz]
z = C.convertBAR2Struct(z)
zones.append(z)
if len(zones) != 2:
CTK.TXT.insert('START', 'MONO2 TFI takes 2 contours.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
coords1 = C.getFields(Internal.__GridCoordinates__, zones[0])[0]
coords2 = C.getFields(Internal.__GridCoordinates__, zones[1])[0]
[m] = mono2mesh(coords1, coords2)
if isinstance(m, str):
CTK.TXT.insert('START', m + '\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
m = C.convertArrays2ZoneNode('TFI', [m])
if surf != []: m = T.projectOrthoSmooth(m, surf)
CTK.saveTree()
CTK.t = C.addBase2PyTree(CTK.t, 'MESHES')
bases = Internal.getNodesFromName1(CTK.t, 'MESHES')
nob = C.getNobOfBase(bases[0], CTK.t)
CTK.add(CTK.t, nob, -1, m)
CTK.TXT.insert('START', 'HO-TFI mesh created.\n')
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
def drawLine(npts):
CTK.t = C.addBase2PyTree(CTK.t, 'CONTOURS', 1)
nodes = Internal.getNodesFromName1(CTK.t, 'CONTOURS')
nob = C.getNobOfBase(nodes[0], CTK.t)
CTK.TXT.insert('START', 'Click first point...\n')
prev = []
if CTK.__BUSY__ == False:
CTK.__BUSY__ = True
TTK.sunkButton(WIDGETS['draw'])
CPlot.setState(cursor=1)
while CTK.__BUSY__:
CPlot.unselectAllZones()
CTK.saveTree()
surfaces = getSurfaces()
l = []
while l == []:
l = CPlot.getActivePoint()
time.sleep(CPlot.__timeStep__)
WIDGETS['draw'].update()
if CTK.__BUSY__ == False: break
if CTK.__BUSY__:
if prev == []:
prev = l
CTK.TXT.insert('START', 'Click second point...\n')
elif (prev != l):
line = D.line(prev, l, npts)
if surfaces != []: line = T.projectOrthoSmooth(line, surfaces)
CTK.add(CTK.t, nob, -1, line)
CTK.TXT.insert('START', 'Line created.\n')
CTK.__BUSY__ = False
TTK.raiseButton(WIDGETS['draw'])
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
CPlot.setState(cursor=0)
prev = []
return
CTK.__BUSY__ = False
TTK.raiseButton(WIDGETS['draw'])
CPlot.setState(cursor=0)
else:
CTK.__BUSY__ = False
TTK.raiseButton(WIDGETS['draw'])
CPlot.setState(cursor=0)
return
def TFI():
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
nzs = CPlot.getSelectedZones()
if len(nzs) == 0:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
surf = getSurfaces()
zones = []
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
z = CTK.t[2][nob][2][noz]
dim = Internal.getZoneDim(z)
if dim[3] == 'BAR':
zp = C.convertBAR2Struct(z)
zones.append(zp)
else:
zones.append(z)
try:
CTK.saveTree()
mesh = G.TFI(zones)
if surf != []: mesh = T.projectOrthoSmooth(mesh, surf)
CTK.t = C.addBase2PyTree(CTK.t, 'MESHES')
bases = Internal.getNodesFromName1(CTK.t, 'MESHES')
nob = C.getNobOfBase(bases[0], CTK.t)
CTK.add(CTK.t, nob, -1, mesh)
CTK.TXT.insert('START', 'TFI mesh created.\n')
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
except Exception as e:
Panels.displayErrors([0, str(e)], header='Error: TFI')
CTK.TXT.insert('START', 'TFI mesh failed.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
def drawFreeHand():
global CURRENTZONE; global CURRENTPOLYLINE; global ALLZONES
w = WIDGETS['draw']
prev = []; first = []
if CTK.__BUSY__ == False:
CPlot.unselectAllZones()
CTK.saveTree()
CTK.__BUSY__ = True
TTK.sunkButton(w)
CPlot.setState(cursor=1)
buttonState = 0
while CTK.__BUSY__ == True:
if prev == []: # first point
l = []
while l == []:
l = CPlot.getActivePoint()
if l != []: prev = l; first = l
time.sleep(CPlot.__timeStep__)
w.update()
if CTK.__BUSY__ == False: break
else: # next points
diff = -1.
while (diff < 1.e-10):
(buttonState,x,y,z) = CPlot.getMouseState()
l = (x,y,z)
diff = Vector.norm2(Vector.sub(l,prev))
diff1 = Vector.norm2(Vector.sub(l,first))
if (diff1 < 1.e-10): l = first
if (buttonState == 5): break
time.sleep(CPlot.__timeStep__)
w.update()
if (CTK.__BUSY__ == False): break
prev = l
CPlot.unselectAllZones()
if (buttonState == 5): # button released
ALLZONES.append(CURRENTZONE)
CURRENTZONE = None; prev = []; first = []
CURRENTPOLYLINE = []
CTK.TKTREE.updateApp()
if (CTK.__BUSY__ == True and buttonState != 5):
CURRENTPOLYLINE.append((l[0],l[1],l[2]))
if (CURRENTZONE == None):
CTK.t = C.addBase2PyTree(CTK.t, 'CONTOURS', 1)
base = Internal.getNodeFromName1(CTK.t, 'CONTOURS')
nob = C.getNobOfBase(base, CTK.t)
a = D.polyline(CURRENTPOLYLINE)
CURRENTZONE = a
CTK.add(CTK.t, nob, -1, a)
ret = Internal.getParentOfNode(CTK.t, CURRENTZONE)
noz = ret[1]
else:
a = D.polyline(CURRENTPOLYLINE)
CURRENTZONE = a
CTK.replace(CTK.t, nob, noz, a)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CPlot.render()
buttonState = 0
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
else:
CTK.__BUSY__ = False
surfaces = getSurfaces()
if (surfaces != []):
if (CURRENTZONE != None): ALLZONES += [CURRENTZONE]
for s in ALLZONES:
ret = Internal.getParentOfNode(CTK.t, s)
nob = C.getNobOfBase(ret[0], CTK.t)
a = T.projectOrthoSmooth(s, surfaces)
noz = ret[1]
CTK.replace(CTK.t, nob, noz, a)
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
CURRENTZONE = None; ALLZONES = []
CURRENTPOLYLINE = []
TTK.raiseButton(w)
CPlot.setState(cursor=0)
def drawRectangle(npts):
CTK.t = C.addBase2PyTree(CTK.t, 'CONTOURS', 1)
nodes = Internal.getNodesFromName1(CTK.t, 'CONTOURS')
nob = C.getNobOfBase(nodes[0], CTK.t)
CTK.TXT.insert('START', 'Click left/lower corner...\n')
w = WIDGETS['draw']
prev = []; second = []
if (CTK.__BUSY__ == False):
CTK.__BUSY__ = True
TTK.sunkButton(w)
CPlot.setState(cursor=1)
while (CTK.__BUSY__ == True):
CPlot.unselectAllZones()
CTK.saveTree()
surfaces = getSurfaces()
l = []
while (l == []):
l = CPlot.getActivePoint()
time.sleep(CPlot.__timeStep__)
w.update()
if (CTK.__BUSY__ == False): break
if (CTK.__BUSY__ == True):
if (prev == []):
prev = l
CTK.TXT.insert('START', 'Click right/up corner...\n')
elif (prev != l):
e1,e2 = getVectorsFromCanvas()
e1n = Vector.norm(e1)
e2n = Vector.norm(e2)
if (e2n > e1n): e1 = e2
P1 = l; P2 = prev
P1P2 = Vector.sub(P2, P1)
P1P2n = Vector.norm(P1P2)
Q = Vector.norm(Vector.cross(e1, P1P2))
L = math.sqrt( P1P2n*P1P2n - Q*Q )
sign = Vector.dot(e1, P1P2)
if (sign > 0): e1 = Vector.mul(L, e1)
else: e1 = Vector.mul(-L, e1)
P3 = Vector.add(P1, e1)
P4 = Vector.sub(P2, e1)
l1 = D.line(P1, P3, npts)
l2 = D.line(P3, P2, npts)
l3 = D.line(P2, P4, npts)
l4 = D.line(P4, P1, npts)
rect = T.join([l1,l2,l3,l4])
if (surfaces != []):
rect = T.projectOrthoSmooth(rect, surfaces)
CTK.add(CTK.t, nob, -1, rect)
CTK.TXT.insert('START', 'Rectangle created.\n')
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
CPlot.setState(cursor=0)
prev = []
return
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
else:
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
def drawArc(npts):
CTK.t = C.addBase2PyTree(CTK.t, 'CONTOURS', 1)
nodes = Internal.getNodesFromName1(CTK.t, 'CONTOURS')
nob = C.getNobOfBase(nodes[0], CTK.t)
CTK.TXT.insert('START', 'Click first point...\n')
w = WIDGETS['draw']
prev = []; second = []
if CTK.__BUSY__ == False:
CTK.__BUSY__ = True
TTK.sunkButton(w)
CPlot.setState(cursor=1)
while CTK.__BUSY__:
CPlot.unselectAllZones()
CTK.saveTree()
surfaces = getSurfaces()
l = []
while (l == []):
l = CPlot.getActivePoint()
time.sleep(CPlot.__timeStep__)
w.update()
if (CTK.__BUSY__ == False): break
if (CTK.__BUSY__ == True):
if (prev == []):
prev = l
CTK.TXT.insert('START', 'Click second point...\n')
elif (second == [] and prev != l):
second = l
CTK.TXT.insert('START', 'Click third point...\n')
elif (prev != l and second != l):
x1 = l[0]; y1 = l[1]; z1 = l[2]
x2 = prev[0]; y2 = prev[1]; z2 = prev[2]
x3 = second[0]; y3 = second[1]; z3 = second[2]
xa = x2 - x1; ya = y2 - y1; za = z2 - z1
xb = x3 - x1; yb = y3 - y1; zb = z3 - z1
xc = x3 - x2; yc = y3 - y2; zc = z3 - z2
a2 = xa*xa + ya*ya + za*za
b2 = xb*xb + yb*yb + zb*zb
c2 = xc*xc + yc*yc + zc*zc
A = 2*b2*c2 + 2*c2*a2 + 2*a2*b2 - a2*a2 - b2*b2 - c2*c2
R = math.sqrt( a2*b2*c2 / A )
nx = ya*zb - za*yb
ny = za*xb - xa*zb
nz = xa*yb - ya*xb
tx = ya*nz - za*ny
ty = za*nx - xa*nz
tz = xa*ny - ya*nx
norm = tx*tx + ty*ty + tz*tz
normi = 1./math.sqrt(norm)
tx = tx*normi; ty = ty*normi; tz = tz*normi;
alpha = R*R - (xa*xa+ya*ya+za*za)*0.25
alpha = math.sqrt(alpha)
center = [0,0,0]
center[0] = 0.5*(x1+x2) + alpha*tx
center[1] = 0.5*(y1+y2) + alpha*ty
center[2] = 0.5*(z1+z2) + alpha*tz
dx3 = center[0]-x3; dy3 = center[1]-y3; dz3 = center[2]-z3
l = dx3*dx3 + dy3*dy3 + dz3*dz3
if (abs(l - R*R) > 1.e-10):
center[0] = 0.5*(x1+x2) - alpha*tx
center[1] = 0.5*(y1+y2) - alpha*ty
center[2] = 0.5*(z1+z2) - alpha*tz
dx3 = center[0]-x3; dy3 = center[1]-y3; dz3 = center[2]-z3
l = dx3*dx3 + dy3*dy3 + dz3*dz3
e1 = [x1-center[0], y1-center[1], z1-center[2]]
e2 = [x2-center[0], y2-center[1], z2-center[2]]
e3 = Vector.cross(e1, e2)
e4 = Vector.cross(e1, e3)
# Images des pts dans le plan xyz
pt1 = D.point((x1,y1,z1))
pt2 = D.point((x2,y2,z2))
pt3 = D.point((x3,y3,z3))
pt1 = T.rotate(pt1,
(center[0], center[1], center[2]),
(e1, e4, e3),
((1,0,0), (0,1,0), (0,0,1)) )
pt2 = T.rotate(pt2,
(center[0], center[1], center[2]),
(e1, e4, e3),
((1,0,0), (0,1,0), (0,0,1)))
pt3 = T.rotate(pt3,
(center[0], center[1], center[2]),
(e1, e4, e3),
((1,0,0), (0,1,0), (0,0,1)))
xp1 = C.getValue(pt1, 'CoordinateX', 0)
yp1 = C.getValue(pt1, 'CoordinateY', 0)
zp1 = C.getValue(pt1, 'CoordinateZ', 0)
xp2 = C.getValue(pt2, 'CoordinateX', 0)
yp2 = C.getValue(pt2, 'CoordinateY', 0)
zp2 = C.getValue(pt2, 'CoordinateZ', 0)
xp3 = C.getValue(pt3, 'CoordinateX', 0)
yp3 = C.getValue(pt3, 'CoordinateY', 0)
zp3 = C.getValue(pt3, 'CoordinateZ', 0)
dx1 = (xp1-center[0])/R; dy1 = (yp1-center[1])/R
if dx1 > 1.: dx1 = 1.
if dx1 < -1.: dx1 = -1.
if dy1 > 0: teta1 = math.acos(dx1)
else: teta1 = 2*math.pi - math.acos(dx1)
teta1 = teta1*180./math.pi; teta1 = 360.
dx2 = (xp2-center[0])/R; dy2 = (yp2-center[1])/R
if dx2 > 1.: dx2 = 1.
if dx2 < -1.: dx2 = -1.
if dy2 > 0: teta2 = math.acos(dx2)
else: teta2 = 2*math.pi - math.acos(dx2)
teta2 = teta2*180./math.pi
dx3 = (xp3-center[0])/R; dy3 = (yp3-center[1])/R
if dx3 > 1.: dx3 = 1.
if dx3 < -1.: dx3 = -1.
if dy3 > 0: teta3 = math.acos(dx3)
else: teta3 = 2*math.pi - math.acos(dx3)
teta3 = teta3*180./math.pi
if teta3 > teta2: teta1 = 360.
else: teta1 = 0.
circle = D.circle((center[0],center[1],center[2]), R,
tetas=teta2, tetae=teta1, N=npts)
circle = T.rotate(circle,
(center[0], center[1], center[2]),
((1,0,0), (0,1,0), (0,0,1)),
(e1, e4, e3))
if surfaces != []:
circle = T.projectOrthoSmooth(circle, surfaces)
CTK.add(CTK.t, nob, -1, circle)
CTK.TXT.insert('START', 'Circle created.\n')
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
CPlot.setState(cursor=0)
prev = []
return
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
else:
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
def drawCircle(npts):
CTK.t = C.addBase2PyTree(CTK.t, 'CONTOURS', 1)
nodes = Internal.getNodesFromName1(CTK.t, 'CONTOURS')
nob = C.getNobOfBase(nodes[0], CTK.t)
CTK.TXT.insert('START', 'Click first point...\n')
w = WIDGETS['draw']
prev = []; second = []
if CTK.__BUSY__ == False:
CTK.__BUSY__ = True
TTK.sunkButton(w)
CPlot.setState(cursor=1)
while CTK.__BUSY__:
CPlot.unselectAllZones()
CTK.saveTree()
surfaces = getSurfaces()
l = []
while (l == []):
l = CPlot.getActivePoint()
time.sleep(CPlot.__timeStep__)
w.update()
if (CTK.__BUSY__ == False): break
if (CTK.__BUSY__ == True):
if prev == []:
prev = l
CTK.TXT.insert('START', 'Click second point...\n')
elif (second == [] and prev != l):
second = l
CTK.TXT.insert('START', 'Click third point...\n')
elif (prev != l and second != l):
x1 = l[0]; y1 = l[1]; z1 = l[2]
x2 = prev[0]; y2 = prev[1]; z2 = prev[2]
x3 = second[0]; y3 = second[1]; z3 = second[2]
xa = x2 - x1; ya = y2 - y1; za = z2 - z1
xb = x3 - x1; yb = y3 - y1; zb = z3 - z1
xc = x3 - x2; yc = y3 - y2; zc = z3 - z2
a2 = xa*xa + ya*ya + za*za
b2 = xb*xb + yb*yb + zb*zb
c2 = xc*xc + yc*yc + zc*zc
A = 2*b2*c2 + 2*c2*a2 + 2*a2*b2 - a2*a2 - b2*b2 - c2*c2
R = math.sqrt( a2*b2*c2 / A )
nx = ya*zb - za*yb
ny = za*xb - xa*zb
nz = xa*yb - ya*xb
tx = ya*nz - za*ny
ty = za*nx - xa*nz
tz = xa*ny - ya*nx
norm = tx*tx + ty*ty + tz*tz
normi = 1./math.sqrt(norm)
tx = tx*normi; ty = ty*normi; tz = tz*normi;
alpha = R*R - (xa*xa+ya*ya+za*za)*0.25
alpha = math.sqrt(alpha)
center = [0,0,0]
center[0] = 0.5*(x1+x2) + alpha*tx
center[1] = 0.5*(y1+y2) + alpha*ty
center[2] = 0.5*(z1+z2) + alpha*tz
l = (center[0]-x3)*(center[0]-x3) + \
(center[1]-y3)*(center[1]-y3) + \
(center[2]-z3)*(center[2]-z3)
if (abs(l - R*R) > 1.e-10):
center[0] = 0.5*(x1+x2) - alpha*tx
center[1] = 0.5*(y1+y2) - alpha*ty
center[2] = 0.5*(z1+z2) - alpha*tz
l = (center[0]-x3)*(center[0]-x3) + \
(center[1]-y3)*(center[1]-y3) + \
(center[2]-z3)*(center[2]-z3)
circle = D.circle( (center[0],center[1],center[2]), R, N=npts)
e1 = [x1-center[0], y1-center[1], z1-center[2]]
e2 = [x2-center[0], y2-center[1], z2-center[2]]
e3 = Vector.cross(e1, e2)
e4 = Vector.cross(e1, e3)
circle = T.rotate(circle,
(center[0], center[1], center[2]),
((1,0,0), (0,1,0), (0,0,1)),
(e1, e4, e3))
if (surfaces != []):
circle = T.projectOrthoSmooth(circle, surfaces)
CTK.add(CTK.t, nob, -1, circle)
CTK.TXT.insert('START', 'Circle created.\n')
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
CPlot.setState(cursor=0)
prev = []
return
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
else:
CTK.__BUSY__ = False
TTK.raiseButton(w)
CPlot.setState(cursor=0)
def HOTFI():
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
nzs = CPlot.getSelectedZones()
if len(nzs) == 0:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
surf = getSurfaces()
zones = []
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
z = CTK.t[2][nob][2][noz]
z = C.convertBAR2Struct(z)
zones.append(z)
if len(zones) != 2:
CTK.TXT.insert('START', 'HO TFI takes 2 contours.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
weight = CTK.varsFromWidget(VARS[1].get(), type=1)
weight = weight[0]
# Nombre de pts (tous les 2 pairs ou tous les 2 impairs)
Nt1 = Internal.getZoneDim(zones[0])[1]
Nt2 = Internal.getZoneDim(zones[1])[1]
if Nt1 / 2 - Nt1 * 0.5 == 0 and Nt2 / 2 - Nt2 * 0.5 != 0:
CTK.TXT.insert(
'START',
'Number of points of countours must be all odd or all even.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
if Nt1 / 2 - Nt1 * 0.5 != 0 and Nt2 / 2 - Nt2 * 0.5 == 0:
CTK.TXT.insert(
'START',
'Number of points of countours must be all odd or all even.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
coords1 = C.getFields(Internal.__GridCoordinates__, zones[0])[0]
coords2 = C.getFields(Internal.__GridCoordinates__, zones[1])[0]
optWeight = 0
optOffset = 0
optScore = 1.e6
Nt2 = coords2[2]
for j in range(-Nt2 // 8, Nt2 // 8):
for i in range(2, 10):
try:
[m, m1, m2, m3] = TFIs.TFIHalfO__(coords1, coords2, i, j)
score = quality([m, m1, m2, m3])
if (score < optScore):
optWeight = i
optScore = score
optOffset = j
except:
pass
print('resulting score=%g' % optScore)
[m, m1, m2, m3] = TFIs.TFIHalfO__(coords1, coords2, optWeight, optOffset)
m = C.convertArrays2ZoneNode('TFI1', [m])
m1 = C.convertArrays2ZoneNode('TFI2', [m1])
m2 = C.convertArrays2ZoneNode('TFI3', [m2])
m3 = C.convertArrays2ZoneNode('TFI4', [m3])
if surf != []:
m = T.projectOrthoSmooth(m, surf)
m1 = T.projectOrthoSmooth(m1, surf)
m2 = T.projectOrthoSmooth(m2, surf)
m3 = T.projectOrthoSmooth(m3, surf)
CTK.saveTree()
CTK.t = C.addBase2PyTree(CTK.t, 'MESHES')
bases = Internal.getNodesFromName1(CTK.t, 'MESHES')
nob = C.getNobOfBase(bases[0], CTK.t)
for i in [m, m1, m2, m3]:
CTK.add(CTK.t, nob, -1, i)
CTK.TXT.insert('START', 'HO-TFI mesh created.\n')
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
def OTFI():
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
nzs = CPlot.getSelectedZones()
if len(nzs) == 0:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
surf = getSurfaces()
zones = []
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
z = CTK.t[2][nob][2][noz]
z = C.convertArray2Hexa(z)
zones.append(z)
zones = T.join(zones)
zones = G.close(zones)
a = C.convertBAR2Struct(z)
weight = CTK.varsFromWidget(VARS[1].get(), type=1)
weight = weight[0]
# Nombre de pts
Nt = Internal.getZoneDim(a)[1]
if Nt / 2 - Nt * 0.5 == 0:
CTK.TXT.insert('START', 'Number of points of countour must be odd.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
coords = C.getFields(Internal.__GridCoordinates__, a)[0]
optWeight = 0
optOffset = 0
optScore = 1.e6
Nt = coords[2]
for j in range(-Nt // 4, Nt // 4 + 1):
for i in range(3, 10):
try:
[m, m1, m2, m3, m4] = TFIs.TFIO__(coords, i, j)
score = quality([m, m1, m2, m3])
if score < optScore:
optWeight = i
optOffset = j
optScore = score
except:
pass
print('resulting weight=%g, offset=%g.' % (optWeight, optOffset))
print('resulting score=%g.' % optScore)
[m, m1, m2, m3, m4] = TFIs.TFIO__(coords, optWeight, optOffset)
m = C.convertArrays2ZoneNode('TFI1', [m])
m1 = C.convertArrays2ZoneNode('TFI2', [m1])
m2 = C.convertArrays2ZoneNode('TFI3', [m2])
m3 = C.convertArrays2ZoneNode('TFI4', [m3])
m4 = C.convertArrays2ZoneNode('TFI5', [m4])
if surf != []:
m = T.projectOrtho(m, surf)
m1 = T.projectOrthoSmooth(m1, surf)
m2 = T.projectOrthoSmooth(m2, surf)
m3 = T.projectOrthoSmooth(m3, surf)
m4 = T.projectOrthoSmooth(m4, surf)
CTK.saveTree()
CTK.t = C.addBase2PyTree(CTK.t, 'MESHES')
bases = Internal.getNodesFromName1(CTK.t, 'MESHES')
nob = C.getNobOfBase(bases[0], CTK.t)
for i in [m, m1, m2, m3, m4]:
CTK.add(CTK.t, nob, -1, i)
CTK.TXT.insert('START', 'O-TFI mesh created.\n')
#C._fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
# - projectOrthoSmooth (pyTree) - import Geom.PyTree as D import Generator.PyTree as G import Transform.PyTree as T import KCore.test as test a = D.sphere((0, 0, 0), 1., 30) b = G.cart((-0.5, -0.5, -1.5), (0.05, 0.05, 0.1), (20, 20, 1)) c = T.projectOrthoSmooth(b, [a], niter=2) test.testT(c, 1)
