def createExtruderStack(cls, new_stack_id: str,
definition: DefinitionContainer,
machine_definition: DefinitionContainer,
**kwargs) -> ExtruderStack:
stack = ExtruderStack(new_stack_id)
stack.setName(definition.getName())
stack.setDefinition(definition)
stack.addMetaDataEntry("position",
definition.getMetaDataEntry("position"))
user_container = InstanceContainer(new_stack_id + "_user")
user_container.addMetaDataEntry("type", "user")
user_container.addMetaDataEntry("extruder", new_stack_id)
from cura.CuraApplication import CuraApplication
user_container.addMetaDataEntry("setting_version",
CuraApplication.SettingVersion)
user_container.setDefinition(machine_definition)
stack.setUserChanges(user_container)
if "next_stack" in kwargs:
stack.setNextStack(kwargs["next_stack"])
# Important! The order here matters, because that allows the stack to
# assume the material and variant have already been set.
if "definition_changes" in kwargs:
stack.setDefinitionChangesById(kwargs["definition_changes"])
else:
stack.setDefinitionChanges(
cls.createDefinitionChangesContainer(
stack, new_stack_id + "_settings"))
if "variant" in kwargs:
stack.setVariantById(kwargs["variant"])
if "material" in kwargs:
stack.setMaterialById(kwargs["material"])
if "quality" in kwargs:
stack.setQualityById(kwargs["quality"])
if "quality_changes" in kwargs:
stack.setQualityChangesById(kwargs["quality_changes"])
# Only add the created containers to the registry after we have set all the other
# properties. This makes the create operation more transactional, since any problems
# setting properties will not result in incomplete containers being added.
registry = ContainerRegistry.getInstance()
registry.addContainer(stack)
registry.addContainer(user_container)
return stack
def test_roundtrip_definition(tmpdir, process_count, loaded_container_registry):
definition = loaded_container_registry.findDefinitionContainers(id = "multiple_settings")[0]
temp_file = tmpdir.join("container_stack_test")
mp_run(process_count, write_data, temp_file, definition)
assert len(list(tmpdir.listdir())) == 1
results = mp_run(process_count, read_data, temp_file)
for result in results:
deserialized_definition = DefinitionContainer("multiple_settings")
deserialized_definition.deserialize(result)
assert deserialized_definition.getName() == definition.getName()
assert deserialized_definition.getMetaData() == definition.getMetaData()
def test_roundtrip_stack(tmpdir, process_count, loaded_container_registry):
definition = loaded_container_registry.findDefinitionContainers(id = "multiple_settings")[0]
temp_file = tmpdir.join("container_stack_test")
mp_run(process_count, write_data, temp_file, definition)
assert len(list(tmpdir.listdir())) == 1
results = mp_run(process_count, read_data, temp_file)
for result in results:
deserialized_definition = DefinitionContainer("test_definition")
deserialized_definition.deserialize(result)
assert deserialized_definition.getName() == definition.getName()
assert deserialized_definition.getMetaData() == definition.getMetaData()
def createExtruderStack(cls, new_stack_id: str, definition: DefinitionContainer, machine_definition: DefinitionContainer, **kwargs) -> ExtruderStack:
stack = ExtruderStack(new_stack_id)
stack.setName(definition.getName())
stack.setDefinition(definition)
stack.addMetaDataEntry("position", definition.getMetaDataEntry("position"))
if "next_stack" in kwargs: #Add stacks before containers are added, since they may trigger a setting update.
stack.setNextStack(kwargs["next_stack"])
user_container = InstanceContainer(new_stack_id + "_user")
user_container.addMetaDataEntry("type", "user")
user_container.addMetaDataEntry("extruder", new_stack_id)
from cura.CuraApplication import CuraApplication
user_container.addMetaDataEntry("setting_version", CuraApplication.SettingVersion)
user_container.setDefinition(machine_definition)
stack.setUserChanges(user_container)
# Important! The order here matters, because that allows the stack to
# assume the material and variant have already been set.
if "definition_changes" in kwargs:
stack.setDefinitionChangesById(kwargs["definition_changes"])
else:
stack.setDefinitionChanges(cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings"))
if "variant" in kwargs:
stack.setVariantById(kwargs["variant"])
if "material" in kwargs:
stack.setMaterialById(kwargs["material"])
if "quality" in kwargs:
stack.setQualityById(kwargs["quality"])
if "quality_changes" in kwargs:
stack.setQualityChangesById(kwargs["quality_changes"])
# Only add the created containers to the registry after we have set all the other
# properties. This makes the create operation more transactional, since any problems
# setting properties will not result in incomplete containers being added.
registry = ContainerRegistry.getInstance()
registry.addContainer(stack)
registry.addContainer(user_container)
return stack
def preRead(self, file_name, show_dialog=True, *args, **kwargs):
self._3mf_mesh_reader = Application.getInstance().getMeshFileHandler(
).getReaderForFile(file_name)
if self._3mf_mesh_reader and self._3mf_mesh_reader.preRead(
file_name) == WorkspaceReader.PreReadResult.accepted:
pass
else:
Logger.log(
"w",
"Could not find reader that was able to read the scene data for 3MF workspace"
)
return WorkspaceReader.PreReadResult.failed
machine_name = ""
machine_type = ""
variant_type_name = i18n_catalog.i18nc("@label", "Nozzle")
num_extruders = 0
# Check if there are any conflicts, so we can ask the user.
archive = zipfile.ZipFile(file_name, "r")
cura_file_names = [
name for name in archive.namelist() if name.startswith("Cura/")
]
container_stack_files = [
name for name in cura_file_names
if name.endswith(self._container_stack_suffix)
]
self._resolve_strategies = {
"machine": None,
"quality_changes": None,
"material": None
}
machine_conflict = False
quality_changes_conflict = False
for container_stack_file in container_stack_files:
container_id = self._stripFileToId(container_stack_file)
serialized = archive.open(container_stack_file).read().decode(
"utf-8")
if machine_name == "":
machine_name = self._getMachineNameFromSerializedStack(
serialized)
stacks = self._container_registry.findContainerStacks(
id=container_id)
if stacks:
# Check if there are any changes at all in any of the container stacks.
id_list = self._getContainerIdListFromSerialized(serialized)
for index, container_id in enumerate(id_list):
if stacks[0].getContainer(index).getId() != container_id:
machine_conflict = True
Job.yieldThread()
definition_container_files = [
name for name in cura_file_names
if name.endswith(self._definition_container_suffix)
]
for definition_container_file in definition_container_files:
container_id = self._stripFileToId(definition_container_file)
definitions = self._container_registry.findDefinitionContainers(
id=container_id)
if not definitions:
definition_container = DefinitionContainer(container_id)
definition_container.deserialize(
archive.open(definition_container_file).read().decode(
"utf-8"))
else:
definition_container = definitions[0]
if definition_container.getMetaDataEntry("type") != "extruder":
machine_type = definition_container.getName()
variant_type_name = definition_container.getMetaDataEntry(
"variants_name", variant_type_name)
else:
num_extruders += 1
Job.yieldThread()
if num_extruders == 0:
num_extruders = 1 # No extruder stacks found, which means there is one extruder
extruders = num_extruders * [""]
material_labels = []
material_conflict = False
xml_material_profile = self._getXmlProfileClass()
if self._material_container_suffix is None:
self._material_container_suffix = ContainerRegistry.getMimeTypeForContainer(
xml_material_profile).preferredSuffix
if xml_material_profile:
material_container_files = [
name for name in cura_file_names
if name.endswith(self._material_container_suffix)
]
for material_container_file in material_container_files:
container_id = self._stripFileToId(material_container_file)
materials = self._container_registry.findInstanceContainers(
id=container_id)
material_labels.append(
self._getMaterialLabelFromSerialized(
archive.open(material_container_file).read().decode(
"utf-8")))
if materials and not materials[0].isReadOnly(
): # Only non readonly materials can be in conflict
material_conflict = True
Job.yieldThread()
# Check if any quality_changes instance container is in conflict.
instance_container_files = [
name for name in cura_file_names
if name.endswith(self._instance_container_suffix)
]
quality_name = ""
quality_type = ""
num_settings_overriden_by_quality_changes = 0 # How many settings are changed by the quality changes
num_user_settings = 0
for instance_container_file in instance_container_files:
container_id = self._stripFileToId(instance_container_file)
instance_container = InstanceContainer(container_id)
# Deserialize InstanceContainer by converting read data from bytes to string
instance_container.deserialize(
archive.open(instance_container_file).read().decode("utf-8"))
container_type = instance_container.getMetaDataEntry("type")
if container_type == "quality_changes":
quality_name = instance_container.getName()
num_settings_overriden_by_quality_changes += len(
instance_container._instances)
# Check if quality changes already exists.
quality_changes = self._container_registry.findInstanceContainers(
id=container_id)
if quality_changes:
# Check if there really is a conflict by comparing the values
if quality_changes[0] != instance_container:
quality_changes_conflict = True
elif container_type == "quality":
# If the quality name is not set (either by quality or changes, set it now)
# Quality changes should always override this (as they are "on top")
if quality_name == "":
quality_name = instance_container.getName()
quality_type = instance_container.getName()
elif container_type == "user":
num_user_settings += len(instance_container._instances)
Job.yieldThread()
num_visible_settings = 0
try:
temp_preferences = Preferences()
temp_preferences.readFromFile(
io.TextIOWrapper(archive.open("Cura/preferences.cfg"))
) # We need to wrap it, else the archive parser breaks.
visible_settings_string = temp_preferences.getValue(
"general/visible_settings")
if visible_settings_string is not None:
num_visible_settings = len(visible_settings_string.split(";"))
active_mode = temp_preferences.getValue("cura/active_mode")
if not active_mode:
active_mode = Preferences.getInstance().getValue(
"cura/active_mode")
except KeyError:
# If there is no preferences file, it's not a workspace, so notify user of failure.
Logger.log("w", "File %s is not a valid workspace.", file_name)
return WorkspaceReader.PreReadResult.failed
# In case we use preRead() to check if a file is a valid project file, we don't want to show a dialog.
if not show_dialog:
return WorkspaceReader.PreReadResult.accepted
# Show the dialog, informing the user what is about to happen.
self._dialog.setMachineConflict(machine_conflict)
self._dialog.setQualityChangesConflict(quality_changes_conflict)
self._dialog.setMaterialConflict(material_conflict)
self._dialog.setNumVisibleSettings(num_visible_settings)
self._dialog.setQualityName(quality_name)
self._dialog.setQualityType(quality_type)
self._dialog.setNumSettingsOverridenByQualityChanges(
num_settings_overriden_by_quality_changes)
self._dialog.setNumUserSettings(num_user_settings)
self._dialog.setActiveMode(active_mode)
self._dialog.setMachineName(machine_name)
self._dialog.setMaterialLabels(material_labels)
self._dialog.setMachineType(machine_type)
self._dialog.setExtruders(extruders)
self._dialog.setVariantType(variant_type_name)
self._dialog.setHasObjectsOnPlate(
Application.getInstance().platformActivity)
self._dialog.show()
# Block until the dialog is closed.
self._dialog.waitForClose()
if self._dialog.getResult() == {}:
return WorkspaceReader.PreReadResult.cancelled
self._resolve_strategies = self._dialog.getResult()
return WorkspaceReader.PreReadResult.accepted
def createExtruderTrain(self, extruder_definition: DefinitionContainer, machine_definition: DefinitionContainer,
position, machine_id: str) -> None:
# Cache some things.
container_registry = ContainerRegistry.getInstance()
machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
# Create a container stack for this extruder.
extruder_stack_id = container_registry.uniqueName(extruder_definition.getId())
container_stack = ContainerStack(extruder_stack_id)
container_stack.setName(extruder_definition.getName()) # Take over the display name to display the stack with.
container_stack.addMetaDataEntry("type", "extruder_train")
container_stack.addMetaDataEntry("machine", machine_id)
container_stack.addMetaDataEntry("position", position)
container_stack.addContainer(extruder_definition)
# Find the variant to use for this extruder.
variant = container_registry.findInstanceContainers(id = "empty_variant")[0]
if machine_definition.getMetaDataEntry("has_variants"):
# First add any variant. Later, overwrite with preference if the preference is valid.
variants = container_registry.findInstanceContainers(definition = machine_definition_id, type = "variant")
if len(variants) >= 1:
variant = variants[0]
preferred_variant_id = machine_definition.getMetaDataEntry("preferred_variant")
if preferred_variant_id:
preferred_variants = container_registry.findInstanceContainers(id = preferred_variant_id, definition = machine_definition_id, type = "variant")
if len(preferred_variants) >= 1:
variant = preferred_variants[0]
else:
Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id)
# And leave it at the default variant.
container_stack.addContainer(variant)
# Find a material to use for this variant.
material = container_registry.findInstanceContainers(id = "empty_material")[0]
if machine_definition.getMetaDataEntry("has_materials"):
# First add any material. Later, overwrite with preference if the preference is valid.
machine_has_variant_materials = machine_definition.getMetaDataEntry("has_variant_materials", default = False)
if machine_has_variant_materials or machine_has_variant_materials == "True":
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id, variant = variant.getId())
else:
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id)
if len(materials) >= 1:
material = materials[0]
preferred_material_id = machine_definition.getMetaDataEntry("preferred_material")
if preferred_material_id:
search_criteria = { "type": "material", "id": preferred_material_id}
if machine_definition.getMetaDataEntry("has_machine_materials"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_variants") and variant:
search_criteria["variant"] = variant.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_materials = container_registry.findInstanceContainers(**search_criteria)
if len(preferred_materials) >= 1:
# In some cases we get multiple materials. In that case, prefer materials that are marked as read only.
read_only_preferred_materials = [preferred_material for preferred_material in preferred_materials if preferred_material.isReadOnly()]
if len(read_only_preferred_materials) >= 1:
material = read_only_preferred_materials[0]
else:
material = preferred_materials[0]
else:
Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id)
# And leave it at the default material.
container_stack.addContainer(material)
# Find a quality to use for this extruder.
quality = container_registry.getEmptyInstanceContainer()
search_criteria = { "type": "quality" }
if machine_definition.getMetaDataEntry("has_machine_quality"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_materials") and material:
search_criteria["material"] = material.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_quality = machine_definition.getMetaDataEntry("preferred_quality")
if preferred_quality:
search_criteria["id"] = preferred_quality
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if not containers and preferred_quality:
Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id)
search_criteria.pop("id", None)
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if containers:
quality = containers[0]
container_stack.addContainer(quality)
empty_quality_changes = container_registry.findInstanceContainers(id = "empty_quality_changes")[0]
container_stack.addContainer(empty_quality_changes)
user_profile = container_registry.findInstanceContainers(type = "user", extruder = extruder_stack_id)
if user_profile: # There was already a user profile, loaded from settings.
user_profile = user_profile[0]
else:
user_profile = InstanceContainer(extruder_stack_id + "_current_settings") # Add an empty user profile.
user_profile.addMetaDataEntry("type", "user")
user_profile.addMetaDataEntry("extruder", extruder_stack_id)
user_profile.setDefinition(machine_definition)
container_registry.addContainer(user_profile)
container_stack.addContainer(user_profile)
# regardless of what the next stack is, we have to set it again, because of signal routing.
container_stack.setNextStack(Application.getInstance().getGlobalContainerStack())
container_registry.addContainer(container_stack)
def preRead(self, file_name, show_dialog=True, *args, **kwargs):
self._3mf_mesh_reader = Application.getInstance().getMeshFileHandler().getReaderForFile(file_name)
if self._3mf_mesh_reader and self._3mf_mesh_reader.preRead(file_name) == WorkspaceReader.PreReadResult.accepted:
pass
else:
Logger.log("w", "Could not find reader that was able to read the scene data for 3MF workspace")
return WorkspaceReader.PreReadResult.failed
machine_name = ""
machine_type = ""
variant_type_name = i18n_catalog.i18nc("@label", "Nozzle")
# Check if there are any conflicts, so we can ask the user.
archive = zipfile.ZipFile(file_name, "r")
cura_file_names = [name for name in archive.namelist() if name.startswith("Cura/")]
# A few lists of containers in this project files.
# When loading the global stack file, it may be associated with those containers, which may or may not be
# in Cura already, so we need to provide them as alternative search lists.
definition_container_list = []
instance_container_list = []
material_container_list = []
resolve_strategy_keys = ["machine", "material", "quality_changes"]
self._resolve_strategies = {k: None for k in resolve_strategy_keys}
containers_found_dict = {k: False for k in resolve_strategy_keys}
#
# Read definition containers
#
machine_definition_container_count = 0
extruder_definition_container_count = 0
definition_container_files = [name for name in cura_file_names if name.endswith(self._definition_container_suffix)]
for each_definition_container_file in definition_container_files:
container_id = self._stripFileToId(each_definition_container_file)
definitions = self._container_registry.findDefinitionContainers(id=container_id)
if not definitions:
definition_container = DefinitionContainer(container_id)
definition_container.deserialize(archive.open(each_definition_container_file).read().decode("utf-8"))
else:
definition_container = definitions[0]
definition_container_list.append(definition_container)
definition_container_type = definition_container.getMetaDataEntry("type")
if definition_container_type == "machine":
machine_type = definition_container.getName()
variant_type_name = definition_container.getMetaDataEntry("variants_name", variant_type_name)
machine_definition_container_count += 1
elif definition_container_type == "extruder":
extruder_definition_container_count += 1
else:
Logger.log("w", "Unknown definition container type %s for %s",
definition_container_type, each_definition_container_file)
Job.yieldThread()
# sanity check
if machine_definition_container_count != 1:
msg = "Expecting one machine definition container but got %s" % machine_definition_container_count
Logger.log("e", msg)
raise RuntimeError(msg)
material_labels = []
material_conflict = False
xml_material_profile = self._getXmlProfileClass()
if self._material_container_suffix is None:
self._material_container_suffix = ContainerRegistry.getMimeTypeForContainer(xml_material_profile).preferredSuffix
if xml_material_profile:
material_container_files = [name for name in cura_file_names if name.endswith(self._material_container_suffix)]
for material_container_file in material_container_files:
container_id = self._stripFileToId(material_container_file)
materials = self._container_registry.findInstanceContainers(id=container_id)
material_labels.append(self._getMaterialLabelFromSerialized(archive.open(material_container_file).read().decode("utf-8")))
if materials:
containers_found_dict["material"] = True
if not materials[0].isReadOnly(): # Only non readonly materials can be in conflict
material_conflict = True
Job.yieldThread()
# Check if any quality_changes instance container is in conflict.
instance_container_files = [name for name in cura_file_names if name.endswith(self._instance_container_suffix)]
quality_name = ""
quality_type = ""
num_settings_overriden_by_quality_changes = 0 # How many settings are changed by the quality changes
num_settings_overriden_by_definition_changes = 0 # How many settings are changed by the definition changes
num_user_settings = 0
quality_changes_conflict = False
definition_changes_conflict = False
for each_instance_container_file in instance_container_files:
container_id = self._stripFileToId(each_instance_container_file)
instance_container = InstanceContainer(container_id)
# Deserialize InstanceContainer by converting read data from bytes to string
instance_container.deserialize(archive.open(each_instance_container_file).read().decode("utf-8"))
instance_container_list.append(instance_container)
container_type = instance_container.getMetaDataEntry("type")
if container_type == "quality_changes":
quality_name = instance_container.getName()
num_settings_overriden_by_quality_changes += len(instance_container._instances)
# Check if quality changes already exists.
quality_changes = self._container_registry.findInstanceContainers(id = container_id)
if quality_changes:
containers_found_dict["quality_changes"] = True
# Check if there really is a conflict by comparing the values
if quality_changes[0] != instance_container:
quality_changes_conflict = True
elif container_type == "definition_changes":
definition_name = instance_container.getName()
num_settings_overriden_by_definition_changes += len(instance_container._instances)
definition_changes = self._container_registry.findDefinitionContainers(id = container_id)
if definition_changes:
if definition_changes[0] != instance_container:
definition_changes_conflict = True
elif container_type == "user":
num_user_settings += len(instance_container._instances)
elif container_type in self._ignored_instance_container_types:
# Ignore certain instance container types
Logger.log("w", "Ignoring instance container [%s] with type [%s]", container_id, container_type)
continue
Job.yieldThread()
# Load ContainerStack files and ExtruderStack files
global_stack_file, extruder_stack_files = self._determineGlobalAndExtruderStackFiles(
file_name, cura_file_names)
machine_conflict = False
# Because there can be cases as follows:
# - the global stack exists but some/all of the extruder stacks DON'T exist
# - the global stack DOESN'T exist but some/all of the extruder stacks exist
# To simplify this, only check if the global stack exists or not
container_id = self._stripFileToId(global_stack_file)
serialized = archive.open(global_stack_file).read().decode("utf-8")
machine_name = self._getMachineNameFromSerializedStack(serialized)
stacks = self._container_registry.findContainerStacks(id = container_id)
if stacks:
global_stack = stacks[0]
containers_found_dict["machine"] = True
# Check if there are any changes at all in any of the container stacks.
id_list = self._getContainerIdListFromSerialized(serialized)
for index, container_id in enumerate(id_list):
# take into account the old empty container IDs
container_id = self._old_empty_profile_id_dict.get(container_id, container_id)
if global_stack.getContainer(index).getId() != container_id:
machine_conflict = True
break
Job.yieldThread()
# if the global stack is found, we check if there are conflicts in the extruder stacks
if containers_found_dict["machine"] and not machine_conflict:
for extruder_stack_file in extruder_stack_files:
container_id = self._stripFileToId(extruder_stack_file)
serialized = archive.open(extruder_stack_file).read().decode("utf-8")
parser = configparser.ConfigParser()
parser.read_string(serialized)
# The check should be done for the extruder stack that's associated with the existing global stack,
# and those extruder stacks may have different IDs.
# So we check according to the positions
position = str(parser["metadata"]["position"])
if position not in global_stack.extruders:
# The extruder position defined in the project doesn't exist in this global stack.
# We can say that it is a machine conflict, but it is very hard to override the machine in this
# case because we need to override the existing extruders and add the non-existing extruders.
#
# HACK:
# To make this simple, we simply say that there is no machine conflict and create a new machine
# by default.
machine_conflict = False
break
existing_extruder_stack = global_stack.extruders[position]
# check if there are any changes at all in any of the container stacks.
id_list = self._getContainerIdListFromSerialized(serialized)
for index, container_id in enumerate(id_list):
# take into account the old empty container IDs
container_id = self._old_empty_profile_id_dict.get(container_id, container_id)
if existing_extruder_stack.getContainer(index).getId() != container_id:
machine_conflict = True
break
num_visible_settings = 0
try:
temp_preferences = Preferences()
temp_preferences.readFromFile(io.TextIOWrapper(archive.open("Cura/preferences.cfg"))) # We need to wrap it, else the archive parser breaks.
visible_settings_string = temp_preferences.getValue("general/visible_settings")
if visible_settings_string is not None:
num_visible_settings = len(visible_settings_string.split(";"))
active_mode = temp_preferences.getValue("cura/active_mode")
if not active_mode:
active_mode = Preferences.getInstance().getValue("cura/active_mode")
except KeyError:
# If there is no preferences file, it's not a workspace, so notify user of failure.
Logger.log("w", "File %s is not a valid workspace.", file_name)
return WorkspaceReader.PreReadResult.failed
# In case we use preRead() to check if a file is a valid project file, we don't want to show a dialog.
if not show_dialog:
return WorkspaceReader.PreReadResult.accepted
# prepare data for the dialog
num_extruders = extruder_definition_container_count
if num_extruders == 0:
num_extruders = 1 # No extruder stacks found, which means there is one extruder
extruders = num_extruders * [""]
# Show the dialog, informing the user what is about to happen.
self._dialog.setMachineConflict(machine_conflict)
self._dialog.setQualityChangesConflict(quality_changes_conflict)
self._dialog.setDefinitionChangesConflict(definition_changes_conflict)
self._dialog.setMaterialConflict(material_conflict)
self._dialog.setNumVisibleSettings(num_visible_settings)
self._dialog.setQualityName(quality_name)
self._dialog.setQualityType(quality_type)
self._dialog.setNumSettingsOverridenByQualityChanges(num_settings_overriden_by_quality_changes)
self._dialog.setNumUserSettings(num_user_settings)
self._dialog.setActiveMode(active_mode)
self._dialog.setMachineName(machine_name)
self._dialog.setMaterialLabels(material_labels)
self._dialog.setMachineType(machine_type)
self._dialog.setExtruders(extruders)
self._dialog.setVariantType(variant_type_name)
self._dialog.setHasObjectsOnPlate(Application.getInstance().platformActivity)
self._dialog.show()
# Block until the dialog is closed.
self._dialog.waitForClose()
if self._dialog.getResult() == {}:
return WorkspaceReader.PreReadResult.cancelled
self._resolve_strategies = self._dialog.getResult()
#
# There can be 3 resolve strategies coming from the dialog:
# - new: create a new container
# - override: override the existing container
# - None: There is no conflict, which means containers with the same IDs may or may not be there already.
# If there is an existing container, there is no conflict between the them, and default to "override"
# If there is no existing container, default to "new"
#
# Default values
for key, strategy in self._resolve_strategies.items():
if key not in containers_found_dict or strategy is not None:
continue
self._resolve_strategies[key] = "override" if containers_found_dict[key] else "new"
return WorkspaceReader.PreReadResult.accepted
def preRead(self, file_name, show_dialog=True, *args, **kwargs):
self._3mf_mesh_reader = Application.getInstance().getMeshFileHandler().getReaderForFile(file_name)
if self._3mf_mesh_reader and self._3mf_mesh_reader.preRead(file_name) == WorkspaceReader.PreReadResult.accepted:
pass
else:
Logger.log("w", "Could not find reader that was able to read the scene data for 3MF workspace")
return WorkspaceReader.PreReadResult.failed
machine_name = ""
machine_type = ""
variant_type_name = i18n_catalog.i18nc("@label", "Nozzle")
num_extruders = 0
# Check if there are any conflicts, so we can ask the user.
archive = zipfile.ZipFile(file_name, "r")
cura_file_names = [name for name in archive.namelist() if name.startswith("Cura/")]
container_stack_files = [name for name in cura_file_names if name.endswith(self._container_stack_suffix)]
self._resolve_strategies = {"machine": None, "quality_changes": None, "material": None}
machine_conflict = False
quality_changes_conflict = False
for container_stack_file in container_stack_files:
container_id = self._stripFileToId(container_stack_file)
serialized = archive.open(container_stack_file).read().decode("utf-8")
if machine_name == "":
machine_name = self._getMachineNameFromSerializedStack(serialized)
stacks = self._container_registry.findContainerStacks(id=container_id)
if stacks:
# Check if there are any changes at all in any of the container stacks.
id_list = self._getContainerIdListFromSerialized(serialized)
for index, container_id in enumerate(id_list):
if stacks[0].getContainer(index).getId() != container_id:
machine_conflict = True
Job.yieldThread()
definition_container_files = [name for name in cura_file_names if name.endswith(self._definition_container_suffix)]
for definition_container_file in definition_container_files:
container_id = self._stripFileToId(definition_container_file)
definitions = self._container_registry.findDefinitionContainers(id=container_id)
if not definitions:
definition_container = DefinitionContainer(container_id)
definition_container.deserialize(archive.open(definition_container_file).read().decode("utf-8"))
else:
definition_container = definitions[0]
if definition_container.getMetaDataEntry("type") != "extruder":
machine_type = definition_container.getName()
variant_type_name = definition_container.getMetaDataEntry("variants_name", variant_type_name)
else:
num_extruders += 1
Job.yieldThread()
if num_extruders == 0:
num_extruders = 1 # No extruder stacks found, which means there is one extruder
extruders = num_extruders * [""]
material_labels = []
material_conflict = False
xml_material_profile = self._getXmlProfileClass()
if self._material_container_suffix is None:
self._material_container_suffix = ContainerRegistry.getMimeTypeForContainer(xml_material_profile).preferredSuffix
if xml_material_profile:
material_container_files = [name for name in cura_file_names if name.endswith(self._material_container_suffix)]
for material_container_file in material_container_files:
container_id = self._stripFileToId(material_container_file)
materials = self._container_registry.findInstanceContainers(id=container_id)
material_labels.append(self._getMaterialLabelFromSerialized(archive.open(material_container_file).read().decode("utf-8")))
if materials and not materials[0].isReadOnly(): # Only non readonly materials can be in conflict
material_conflict = True
Job.yieldThread()
# Check if any quality_changes instance container is in conflict.
instance_container_files = [name for name in cura_file_names if name.endswith(self._instance_container_suffix)]
quality_name = ""
quality_type = ""
num_settings_overriden_by_quality_changes = 0 # How many settings are changed by the quality changes
num_user_settings = 0
for instance_container_file in instance_container_files:
container_id = self._stripFileToId(instance_container_file)
instance_container = InstanceContainer(container_id)
# Deserialize InstanceContainer by converting read data from bytes to string
instance_container.deserialize(archive.open(instance_container_file).read().decode("utf-8"))
container_type = instance_container.getMetaDataEntry("type")
if container_type == "quality_changes":
quality_name = instance_container.getName()
num_settings_overriden_by_quality_changes += len(instance_container._instances)
# Check if quality changes already exists.
quality_changes = self._container_registry.findInstanceContainers(id = container_id)
if quality_changes:
# Check if there really is a conflict by comparing the values
if quality_changes[0] != instance_container:
quality_changes_conflict = True
elif container_type == "quality":
# If the quality name is not set (either by quality or changes, set it now)
# Quality changes should always override this (as they are "on top")
if quality_name == "":
quality_name = instance_container.getName()
quality_type = instance_container.getName()
elif container_type == "user":
num_user_settings += len(instance_container._instances)
Job.yieldThread()
num_visible_settings = 0
try:
temp_preferences = Preferences()
temp_preferences.readFromFile(io.TextIOWrapper(archive.open("Cura/preferences.cfg"))) # We need to wrap it, else the archive parser breaks.
visible_settings_string = temp_preferences.getValue("general/visible_settings")
if visible_settings_string is not None:
num_visible_settings = len(visible_settings_string.split(";"))
active_mode = temp_preferences.getValue("cura/active_mode")
if not active_mode:
active_mode = Preferences.getInstance().getValue("cura/active_mode")
except KeyError:
# If there is no preferences file, it's not a workspace, so notify user of failure.
Logger.log("w", "File %s is not a valid workspace.", file_name)
return WorkspaceReader.PreReadResult.failed
# In case we use preRead() to check if a file is a valid project file, we don't want to show a dialog.
if not show_dialog:
return WorkspaceReader.PreReadResult.accepted
# Show the dialog, informing the user what is about to happen.
self._dialog.setMachineConflict(machine_conflict)
self._dialog.setQualityChangesConflict(quality_changes_conflict)
self._dialog.setMaterialConflict(material_conflict)
self._dialog.setNumVisibleSettings(num_visible_settings)
self._dialog.setQualityName(quality_name)
self._dialog.setQualityType(quality_type)
self._dialog.setNumSettingsOverridenByQualityChanges(num_settings_overriden_by_quality_changes)
self._dialog.setNumUserSettings(num_user_settings)
self._dialog.setActiveMode(active_mode)
self._dialog.setMachineName(machine_name)
self._dialog.setMaterialLabels(material_labels)
self._dialog.setMachineType(machine_type)
self._dialog.setExtruders(extruders)
self._dialog.setVariantType(variant_type_name)
self._dialog.setHasObjectsOnPlate(Application.getInstance().platformActivity)
self._dialog.show()
# Block until the dialog is closed.
self._dialog.waitForClose()
if self._dialog.getResult() == {}:
return WorkspaceReader.PreReadResult.cancelled
self._resolve_strategies = self._dialog.getResult()
return WorkspaceReader.PreReadResult.accepted
def preRead(self, file_name, show_dialog=True, *args, **kwargs):
self._3mf_mesh_reader = Application.getInstance().getMeshFileHandler().getReaderForFile(file_name)
if self._3mf_mesh_reader and self._3mf_mesh_reader.preRead(file_name) == WorkspaceReader.PreReadResult.accepted:
pass
else:
Logger.log("w", "Could not find reader that was able to read the scene data for 3MF workspace")
return WorkspaceReader.PreReadResult.failed
machine_name = ""
machine_type = ""
variant_type_name = i18n_catalog.i18nc("@label", "Nozzle")
# Check if there are any conflicts, so we can ask the user.
archive = zipfile.ZipFile(file_name, "r")
cura_file_names = [name for name in archive.namelist() if name.startswith("Cura/")]
# A few lists of containers in this project files.
# When loading the global stack file, it may be associated with those containers, which may or may not be
# in Cura already, so we need to provide them as alternative search lists.
definition_container_list = []
instance_container_list = []
material_container_list = []
#
# Read definition containers
#
machine_definition_container_count = 0
extruder_definition_container_count = 0
definition_container_files = [name for name in cura_file_names if name.endswith(self._definition_container_suffix)]
for each_definition_container_file in definition_container_files:
container_id = self._stripFileToId(each_definition_container_file)
definitions = self._container_registry.findDefinitionContainers(id=container_id)
if not definitions:
definition_container = DefinitionContainer(container_id)
definition_container.deserialize(archive.open(each_definition_container_file).read().decode("utf-8"))
else:
definition_container = definitions[0]
definition_container_list.append(definition_container)
definition_container_type = definition_container.getMetaDataEntry("type")
if definition_container_type == "machine":
machine_type = definition_container.getName()
variant_type_name = definition_container.getMetaDataEntry("variants_name", variant_type_name)
machine_definition_container_count += 1
elif definition_container_type == "extruder":
extruder_definition_container_count += 1
else:
Logger.log("w", "Unknown definition container type %s for %s",
definition_container_type, each_definition_container_file)
Job.yieldThread()
# sanity check
if machine_definition_container_count != 1:
msg = "Expecting one machine definition container but got %s" % machine_definition_container_count
Logger.log("e", msg)
raise RuntimeError(msg)
material_labels = []
material_conflict = False
xml_material_profile = self._getXmlProfileClass()
if self._material_container_suffix is None:
self._material_container_suffix = ContainerRegistry.getMimeTypeForContainer(xml_material_profile).preferredSuffix
if xml_material_profile:
material_container_files = [name for name in cura_file_names if name.endswith(self._material_container_suffix)]
for material_container_file in material_container_files:
container_id = self._stripFileToId(material_container_file)
materials = self._container_registry.findInstanceContainers(id=container_id)
material_labels.append(self._getMaterialLabelFromSerialized(archive.open(material_container_file).read().decode("utf-8")))
if materials and not materials[0].isReadOnly(): # Only non readonly materials can be in conflict
material_conflict = True
Job.yieldThread()
# Check if any quality_changes instance container is in conflict.
instance_container_files = [name for name in cura_file_names if name.endswith(self._instance_container_suffix)]
quality_name = ""
quality_type = ""
num_settings_overriden_by_quality_changes = 0 # How many settings are changed by the quality changes
num_settings_overriden_by_definition_changes = 0 # How many settings are changed by the definition changes
num_user_settings = 0
quality_changes_conflict = False
definition_changes_conflict = False
for each_instance_container_file in instance_container_files:
container_id = self._stripFileToId(each_instance_container_file)
instance_container = InstanceContainer(container_id)
# Deserialize InstanceContainer by converting read data from bytes to string
instance_container.deserialize(archive.open(each_instance_container_file).read().decode("utf-8"))
instance_container_list.append(instance_container)
container_type = instance_container.getMetaDataEntry("type")
if container_type == "quality_changes":
quality_name = instance_container.getName()
num_settings_overriden_by_quality_changes += len(instance_container._instances)
# Check if quality changes already exists.
quality_changes = self._container_registry.findInstanceContainers(id = container_id)
if quality_changes:
# Check if there really is a conflict by comparing the values
if quality_changes[0] != instance_container:
quality_changes_conflict = True
elif container_type == "definition_changes":
definition_name = instance_container.getName()
num_settings_overriden_by_definition_changes += len(instance_container._instances)
definition_changes = self._container_registry.findDefinitionContainers(id = container_id)
if definition_changes:
if definition_changes[0] != instance_container:
definition_changes_conflict = True
elif container_type == "user":
num_user_settings += len(instance_container._instances)
elif container_type in self._ignored_instance_container_types:
# Ignore certain instance container types
Logger.log("w", "Ignoring instance container [%s] with type [%s]", container_id, container_type)
continue
Job.yieldThread()
# Load ContainerStack files and ExtruderStack files
global_stack_file, extruder_stack_files = self._determineGlobalAndExtruderStackFiles(
file_name, cura_file_names)
self._resolve_strategies = {"machine": None, "quality_changes": None, "material": None}
machine_conflict = False
for container_stack_file in [global_stack_file] + extruder_stack_files:
container_id = self._stripFileToId(container_stack_file)
serialized = archive.open(container_stack_file).read().decode("utf-8")
if machine_name == "":
machine_name = self._getMachineNameFromSerializedStack(serialized)
stacks = self._container_registry.findContainerStacks(id = container_id)
if stacks:
# Check if there are any changes at all in any of the container stacks.
id_list = self._getContainerIdListFromSerialized(serialized)
for index, container_id in enumerate(id_list):
if stacks[0].getContainer(index).getId() != container_id:
machine_conflict = True
Job.yieldThread()
num_visible_settings = 0
try:
temp_preferences = Preferences()
temp_preferences.readFromFile(io.TextIOWrapper(archive.open("Cura/preferences.cfg"))) # We need to wrap it, else the archive parser breaks.
visible_settings_string = temp_preferences.getValue("general/visible_settings")
if visible_settings_string is not None:
num_visible_settings = len(visible_settings_string.split(";"))
active_mode = temp_preferences.getValue("cura/active_mode")
if not active_mode:
active_mode = Preferences.getInstance().getValue("cura/active_mode")
except KeyError:
# If there is no preferences file, it's not a workspace, so notify user of failure.
Logger.log("w", "File %s is not a valid workspace.", file_name)
return WorkspaceReader.PreReadResult.failed
# In case we use preRead() to check if a file is a valid project file, we don't want to show a dialog.
if not show_dialog:
return WorkspaceReader.PreReadResult.accepted
# prepare data for the dialog
num_extruders = extruder_definition_container_count
if num_extruders == 0:
num_extruders = 1 # No extruder stacks found, which means there is one extruder
extruders = num_extruders * [""]
# Show the dialog, informing the user what is about to happen.
self._dialog.setMachineConflict(machine_conflict)
self._dialog.setQualityChangesConflict(quality_changes_conflict)
self._dialog.setDefinitionChangesConflict(definition_changes_conflict)
self._dialog.setMaterialConflict(material_conflict)
self._dialog.setNumVisibleSettings(num_visible_settings)
self._dialog.setQualityName(quality_name)
self._dialog.setQualityType(quality_type)
self._dialog.setNumSettingsOverridenByQualityChanges(num_settings_overriden_by_quality_changes)
self._dialog.setNumUserSettings(num_user_settings)
self._dialog.setActiveMode(active_mode)
self._dialog.setMachineName(machine_name)
self._dialog.setMaterialLabels(material_labels)
self._dialog.setMachineType(machine_type)
self._dialog.setExtruders(extruders)
self._dialog.setVariantType(variant_type_name)
self._dialog.setHasObjectsOnPlate(Application.getInstance().platformActivity)
self._dialog.show()
# Block until the dialog is closed.
self._dialog.waitForClose()
if self._dialog.getResult() == {}:
return WorkspaceReader.PreReadResult.cancelled
self._resolve_strategies = self._dialog.getResult()
#
# There can be 3 resolve strategies coming from the dialog:
# - new: create a new container
# - override: override the existing container
# - None: There is no conflict, which means containers with the same IDs may or may not be there already.
# If they are there, there is no conflict between the them.
# In this case, you can either create a new one, or safely override the existing one.
#
# Default values
for k, v in self._resolve_strategies.items():
if v is None:
self._resolve_strategies[k] = "new"
return WorkspaceReader.PreReadResult.accepted