def __init__(self, obj, mode):
self._obj = obj
self._tranForm = _TransitionDialog()
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_TRANSITION)
self._dbForm = self._db.getForm()
self.form = [self._tranForm, self._dbForm]
self._tranForm.setWindowIcon(
QtGui.QIcon(FreeCAD.getUserAppDataDir() +
"Mod/Rocket/Resources/icons/Rocket_Transition.svg"))
self._tranForm.transitionTypesCombo.currentTextChanged.connect(
self.onTransitionType)
self._tranForm.transitionStylesCombo.currentTextChanged.connect(
self.onTransitionStyle)
self._tranForm.lengthInput.textEdited.connect(self.onLength)
self._tranForm.foreDiameterInput.textEdited.connect(
self.onForeDiameter)
self._tranForm.aftDiameterInput.textEdited.connect(self.onAftDiameter)
self._tranForm.coreDiameterInput.textEdited.connect(
self.onCoreDiameter)
self._tranForm.thicknessInput.textEdited.connect(self.onThickness)
self._tranForm.coefficientInput.textEdited.connect(self.onCoefficient)
self._tranForm.clippedCheckbox.stateChanged.connect(self.onClipped)
self._tranForm.foreShoulderCheckbox.stateChanged.connect(
self.onForeShoulder)
self._tranForm.foreShoulderDiameterInput.textEdited.connect(
self.onForeShoulderDiameter)
self._tranForm.foreShoulderLengthInput.textEdited.connect(
self.onForeShoulderLength)
self._tranForm.foreShoulderThicknessInput.textEdited.connect(
self.onForeShoulderThickness)
self._tranForm.aftShoulderCheckbox.stateChanged.connect(
self.onAftShoulder)
self._tranForm.aftShoulderDiameterInput.textEdited.connect(
self.onAftShoulderDiameter)
self._tranForm.aftShoulderLengthInput.textEdited.connect(
self.onAftShoulderLength)
self._tranForm.aftShoulderThicknessInput.textEdited.connect(
self.onAftShoulderThickness)
self._db.dbLoad.connect(self.onLookup)
self.update()
if mode == 0: # fresh created
self._obj.Proxy.execute(self._obj) # calculate once
FreeCAD.Gui.SendMsgToActiveView("ViewFit")
def __init__(self, obj, crPanel, mode):
self._obj = obj
self._crPanel = crPanel
self._bulkForm = _BulkheadDialog(self._crPanel)
if crPanel:
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_CENTERINGRING)
else:
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_BULKHEAD)
self._dbForm = self._db.getForm()
self.form = [self._bulkForm, self._dbForm]
if self._crPanel:
self._bulkForm.setWindowIcon(QtGui.QIcon(FreeCAD.getUserAppDataDir() + "Mod/Rocket/Resources/icons/Rocket_CenterinRing.svg"))
else:
self._bulkForm.setWindowIcon(QtGui.QIcon(FreeCAD.getUserAppDataDir() + "Mod/Rocket/Resources/icons/Rocket_Bulkhead.svg"))
self._bulkForm.diameterInput.textEdited.connect(self.onDiameter)
self._bulkForm.thicknessInput.textEdited.connect(self.onThickness)
self._bulkForm.stepCheckbox.stateChanged.connect(self.onStep)
self._bulkForm.stepDiameterInput.textEdited.connect(self.onStepDiameter)
self._bulkForm.stepThicknessInput.textEdited.connect(self.onStepThickness)
self._bulkForm.holeCheckbox.stateChanged.connect(self.onHole)
self._bulkForm.holeDiameterInput.textEdited.connect(self.onHoleDiameter)
self._bulkForm.holeCenterInput.textEdited.connect(self.onHoleCenter)
self._bulkForm.holeCountSpinBox.valueChanged.connect(self.onHoleCount)
self._bulkForm.holeOffsetInput.textEdited.connect(self.onHoleOffset)
if self._crPanel:
self._bulkForm.centerDiameterInput.textEdited.connect(self.onCenterDiameter)
self._bulkForm.notchedCheckbox.stateChanged.connect(self.onNotched)
self._bulkForm.notchWidthInput.textEdited.connect(self.onNotchWidth)
self._bulkForm.notchHeightInput.textEdited.connect(self.onNotchHeight)
self._db.dbLoad.connect(self.onLookup)
self.update()
if mode == 0: # fresh created
self._obj.Proxy.execute(self._obj) # calculate once
FreeCAD.Gui.SendMsgToActiveView("ViewFit")
def __init__(self, obj, mode):
self._obj = obj
self._noseForm = _NoseConeDialog()
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_NOSECONE)
self._dbForm = self._db.getForm()
self.form = [self._noseForm, self._dbForm]
self._noseForm.setWindowIcon(
QtGui.QIcon(FreeCAD.getUserAppDataDir() +
"Mod/Rocket/Resources/icons/Rocket_NoseCone.svg"))
self._noseForm.noseConeTypesCombo.currentTextChanged.connect(
self.onNoseType)
self._noseForm.noseStylesCombo.currentTextChanged.connect(
self.onNoseStyle)
self._noseForm.lengthInput.textEdited.connect(self.onLengthChanged)
self._noseForm.diameterInput.textEdited.connect(self.onDiameterChanged)
self._noseForm.thicknessInput.textEdited.connect(
self.onThicknessChanged)
self._noseForm.coefficientInput.textEdited.connect(
self.onCoefficientChanged)
self._noseForm.shoulderCheckbox.stateChanged.connect(
self.onShoulderChanged)
self._noseForm.shoulderDiameterInput.textEdited.connect(
self.onShoulderDiameterChanged)
self._noseForm.shoulderLengthInput.textEdited.connect(
self.onShoulderLengthChanged)
self._noseForm.shoulderThicknessInput.textEdited.connect(
self.onShoulderThicknessChanged)
self._db.dbLoad.connect(self.onLookup)
self.update()
if mode == 0: # fresh created
self._obj.Proxy.execute(self._obj) # calculate once
FreeCAD.Gui.SendMsgToActiveView("ViewFit")
def __init__(self, obj, mode):
self._obj = obj
self._btForm = _BodyTubeDialog()
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_BODYTUBE)
self._dbForm = self._db.getForm()
self.form = [self._btForm, self._dbForm]
self._btForm.setWindowIcon(
QtGui.QIcon(FreeCAD.getUserAppDataDir() +
"Mod/Rocket/Resources/icons/Rocket_BodyTube.svg"))
self._btForm.idInput.textEdited.connect(self.onIdChanged)
self._btForm.odInput.textEdited.connect(self.onOdChanged)
self._btForm.lengthInput.textEdited.connect(self.onLengthChanged)
self._db.dbLoad.connect(self.onLookup)
self.update()
if mode == 0: # fresh created
self._obj.Proxy.execute(self._obj) # calculate once
FreeCAD.Gui.SendMsgToActiveView("ViewFit")
class TaskPanelBulkhead:
def __init__(self, obj, crPanel, mode):
self._obj = obj
self._crPanel = crPanel
self._bulkForm = _BulkheadDialog(self._crPanel)
if crPanel:
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_CENTERINGRING)
else:
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_BULKHEAD)
self._dbForm = self._db.getForm()
self.form = [self._bulkForm, self._dbForm]
if self._crPanel:
self._bulkForm.setWindowIcon(QtGui.QIcon(FreeCAD.getUserAppDataDir() + "Mod/Rocket/Resources/icons/Rocket_CenterinRing.svg"))
else:
self._bulkForm.setWindowIcon(QtGui.QIcon(FreeCAD.getUserAppDataDir() + "Mod/Rocket/Resources/icons/Rocket_Bulkhead.svg"))
self._bulkForm.diameterInput.textEdited.connect(self.onDiameter)
self._bulkForm.thicknessInput.textEdited.connect(self.onThickness)
self._bulkForm.stepCheckbox.stateChanged.connect(self.onStep)
self._bulkForm.stepDiameterInput.textEdited.connect(self.onStepDiameter)
self._bulkForm.stepThicknessInput.textEdited.connect(self.onStepThickness)
self._bulkForm.holeCheckbox.stateChanged.connect(self.onHole)
self._bulkForm.holeDiameterInput.textEdited.connect(self.onHoleDiameter)
self._bulkForm.holeCenterInput.textEdited.connect(self.onHoleCenter)
self._bulkForm.holeCountSpinBox.valueChanged.connect(self.onHoleCount)
self._bulkForm.holeOffsetInput.textEdited.connect(self.onHoleOffset)
if self._crPanel:
self._bulkForm.centerDiameterInput.textEdited.connect(self.onCenterDiameter)
self._bulkForm.notchedCheckbox.stateChanged.connect(self.onNotched)
self._bulkForm.notchWidthInput.textEdited.connect(self.onNotchWidth)
self._bulkForm.notchHeightInput.textEdited.connect(self.onNotchHeight)
self._db.dbLoad.connect(self.onLookup)
self.update()
if mode == 0: # fresh created
self._obj.Proxy.execute(self._obj) # calculate once
FreeCAD.Gui.SendMsgToActiveView("ViewFit")
def transferTo(self):
"Transfer from the dialog to the object"
self._obj.Diameter = self._bulkForm.diameterInput.text()
self._obj.Thickness = self._bulkForm.thicknessInput.text()
self._obj.Step = self._bulkForm.stepCheckbox.isChecked()
self._obj.StepDiameter = self._bulkForm.stepDiameterInput.text()
self._obj.StepThickness = self._bulkForm.stepThicknessInput.text()
self._obj.Holes = self._bulkForm.holeCheckbox.isChecked()
self._obj.HoleDiameter = self._bulkForm.holeDiameterInput.text()
self._obj.HoleCenter = self._bulkForm.holeCenterInput.text()
self._obj.HoleCount = self._bulkForm.holeCountSpinBox.value()
self._obj.HoleOffset = self._bulkForm.holeOffsetInput.text()
if self._crPanel:
self._obj.CenterDiameter = self._bulkForm.centerDiameterInput.text()
self._obj.Notched = self._bulkForm.notchedCheckbox.isChecked()
self._obj.NotchWidth = self._bulkForm.notchWidthInput.text()
self._obj.NotchHeight = self._bulkForm.notchHeightInput.text()
def transferFrom(self):
"Transfer from the object to the dialog"
self._bulkForm.diameterInput.setText(self._obj.Diameter.UserString)
self._bulkForm.thicknessInput.setText(self._obj.Thickness.UserString)
self._bulkForm.stepCheckbox.setChecked(self._obj.Step)
self._bulkForm.stepDiameterInput.setText(self._obj.StepDiameter.UserString)
self._bulkForm.stepThicknessInput.setText(self._obj.StepThickness.UserString)
self._bulkForm.holeCheckbox.setChecked(self._obj.Holes)
self._bulkForm.holeDiameterInput.setText(self._obj.HoleDiameter.UserString)
self._bulkForm.holeCenterInput.setText(self._obj.HoleCenter.UserString)
self._bulkForm.holeCountSpinBox.setValue(self._obj.HoleCount)
self._bulkForm.holeOffsetInput.setText(self._obj.HoleOffset.UserString)
if self._crPanel:
self._bulkForm.centerDiameterInput.setText(self._obj.CenterDiameter.UserString)
self._bulkForm.notchedCheckbox.setChecked(self._obj.Notched)
self._bulkForm.notchWidthInput.setText(self._obj.NotchWidth.UserString)
self._bulkForm.notchHeightInput.setText(self._obj.NotchHeight.UserString)
self._setNotchedState()
self._setStepState()
self._setHoleState()
def onDiameter(self, value):
try:
self._obj.Diameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onThickness(self, value):
try:
self._obj.Thickness = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onCenterDiameter(self, value):
try:
self._obj.CenterDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def _setStepState(self):
self._bulkForm.stepDiameterInput.setEnabled(self._obj.Step)
self._bulkForm.stepThicknessInput.setEnabled(self._obj.Step)
def onStep(self, value):
self._obj.Step = self._bulkForm.stepCheckbox.isChecked()
self._setStepState()
self._obj.Proxy.execute(self._obj)
def onStepDiameter(self, value):
try:
self._obj.StepDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onStepThickness(self, value):
try:
self._obj.StepThickness = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def _setHoleState(self):
self._bulkForm.holeDiameterInput.setEnabled(self._obj.Holes)
self._bulkForm.holeCenterInput.setEnabled(self._obj.Holes)
self._bulkForm.holeCountSpinBox.setEnabled(self._obj.Holes)
self._bulkForm.holeOffsetInput.setEnabled(self._obj.Holes)
def onHole(self, value):
self._obj.Holes = self._bulkForm.holeCheckbox.isChecked()
self._setHoleState()
self._obj.Proxy.execute(self._obj)
def onHoleDiameter(self, value):
try:
self._obj.HoleDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onHoleCenter(self, value):
try:
self._obj.HoleCenter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onHoleCount(self, value):
self._obj.HoleCount = int(value)
self._obj.Proxy.execute(self._obj)
def onHoleOffset(self, value):
try:
self._obj.HoleOffset = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def _setNotchedState(self):
self._bulkForm.notchWidthInput.setEnabled(self._obj.Notched)
self._bulkForm.notchHeightInput.setEnabled(self._obj.Notched)
def onNotched(self, value):
self._obj.Notched = self._bulkForm.notchedCheckbox.isChecked()
self._setNotchedState()
self._obj.Proxy.execute(self._obj)
def onNotchWidth(self, value):
try:
self._obj.NotchWidth = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onNotchHeight(self, value):
try:
self._obj.NotchHeight = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onLookup(self):
result = self._db.getLookupResult()
self._obj.Diameter = _valueWithUnits(result["outer_diameter"], result["outer_diameter_units"])
self._obj.Thickness =_valueWithUnits(result["length"], result["length_units"])
self._obj.Step = False
self._obj.StepDiameter = 0.0
self._obj.StepThickness = 0.0
self._obj.Holes = False
self._obj.HoleDiameter = 0.0
self._obj.HoleCenter = 0.0
self._obj.HoleCount = 1
self._obj.HoleOffset = 0.0
if self._crPanel:
self._obj.CenterDiameter = _valueWithUnits(result["inner_diameter"], result["inner_diameter_units"])
self._obj.Notched = False
self._obj.NotchWidth = 0.0
self._obj.NotchHeight = 0.0
self.update()
self._obj.Proxy.execute(self._obj)
def getStandardButtons(self):
return int(QtGui.QDialogButtonBox.Ok) | int(QtGui.QDialogButtonBox.Cancel)| int(QtGui.QDialogButtonBox.Apply)
def clicked(self,button):
if button == QtGui.QDialogButtonBox.Apply:
#print "Apply"
self.transferTo()
self._obj.Proxy.execute(self._obj)
def update(self):
'fills the widgets'
self.transferFrom()
def accept(self):
self.transferTo()
FreeCAD.ActiveDocument.recompute()
FreeCADGui.ActiveDocument.resetEdit()
def reject(self):
FreeCAD.ActiveDocument.abortTransaction()
FreeCAD.ActiveDocument.recompute()
FreeCADGui.ActiveDocument.resetEdit()
class TaskPanelBodyTube:
def __init__(self, obj, mode):
self._obj = obj
self._btForm = _BodyTubeDialog()
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_BODYTUBE)
self._dbForm = self._db.getForm()
self.form = [self._btForm, self._dbForm]
self._btForm.setWindowIcon(
QtGui.QIcon(FreeCAD.getUserAppDataDir() +
"Mod/Rocket/Resources/icons/Rocket_BodyTube.svg"))
self._btForm.idInput.textEdited.connect(self.onIdChanged)
self._btForm.odInput.textEdited.connect(self.onOdChanged)
self._btForm.lengthInput.textEdited.connect(self.onLengthChanged)
self._db.dbLoad.connect(self.onLookup)
self.update()
if mode == 0: # fresh created
self._obj.Proxy.execute(self._obj) # calculate once
FreeCAD.Gui.SendMsgToActiveView("ViewFit")
def transferTo(self):
"Transfer from the dialog to the object"
self._obj.InnerDiameter = self._btForm.idInput.text()
self._obj.OuterDiameter = self._btForm.odInput.text()
self._obj.Length = self._btForm.lengthInput.text()
def transferFrom(self):
"Transfer from the object to the dialog"
self._btForm.idInput.setText(self._obj.InnerDiameter.UserString)
self._btForm.odInput.setText(self._obj.OuterDiameter.UserString)
self._btForm.lengthInput.setText(self._obj.Length.UserString)
def onIdChanged(self, value):
try:
self._obj.InnerDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onOdChanged(self, value):
try:
self._obj.OuterDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onLengthChanged(self, value):
try:
self._obj.Length = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onLookup(self):
result = self._db.getLookupResult()
self._obj.InnerDiameter = _valueWithUnits(
result["inner_diameter"], result["inner_diameter_units"])
self._obj.OuterDiameter = _valueWithUnits(
result["outer_diameter"], result["outer_diameter_units"])
self._obj.Length = _valueWithUnits(result["length"],
result["length_units"])
self.update()
self._obj.Proxy.execute(self._obj)
def getStandardButtons(self):
return int(QtGui.QDialogButtonBox.Ok) | int(
QtGui.QDialogButtonBox.Cancel) | int(QtGui.QDialogButtonBox.Apply)
def clicked(self, button):
if button == QtGui.QDialogButtonBox.Apply:
#print "Apply"
self.transferTo()
self._obj.Proxy.execute(self._obj)
def update(self):
'fills the widgets'
self.transferFrom()
def accept(self):
self.transferTo()
FreeCAD.ActiveDocument.recompute()
FreeCADGui.ActiveDocument.resetEdit()
def reject(self):
FreeCAD.ActiveDocument.abortTransaction()
FreeCAD.ActiveDocument.recompute()
FreeCADGui.ActiveDocument.resetEdit()
class TaskPanelTransition:
def __init__(self, obj, mode):
self._obj = obj
self._tranForm = _TransitionDialog()
self._db = TaskPanelDatabase(obj, COMPONENT_TYPE_TRANSITION)
self._dbForm = self._db.getForm()
self.form = [self._tranForm, self._dbForm]
self._tranForm.setWindowIcon(
QtGui.QIcon(FreeCAD.getUserAppDataDir() +
"Mod/Rocket/Resources/icons/Rocket_Transition.svg"))
self._tranForm.transitionTypesCombo.currentTextChanged.connect(
self.onTransitionType)
self._tranForm.transitionStylesCombo.currentTextChanged.connect(
self.onTransitionStyle)
self._tranForm.lengthInput.textEdited.connect(self.onLength)
self._tranForm.foreDiameterInput.textEdited.connect(
self.onForeDiameter)
self._tranForm.aftDiameterInput.textEdited.connect(self.onAftDiameter)
self._tranForm.coreDiameterInput.textEdited.connect(
self.onCoreDiameter)
self._tranForm.thicknessInput.textEdited.connect(self.onThickness)
self._tranForm.coefficientInput.textEdited.connect(self.onCoefficient)
self._tranForm.clippedCheckbox.stateChanged.connect(self.onClipped)
self._tranForm.foreShoulderCheckbox.stateChanged.connect(
self.onForeShoulder)
self._tranForm.foreShoulderDiameterInput.textEdited.connect(
self.onForeShoulderDiameter)
self._tranForm.foreShoulderLengthInput.textEdited.connect(
self.onForeShoulderLength)
self._tranForm.foreShoulderThicknessInput.textEdited.connect(
self.onForeShoulderThickness)
self._tranForm.aftShoulderCheckbox.stateChanged.connect(
self.onAftShoulder)
self._tranForm.aftShoulderDiameterInput.textEdited.connect(
self.onAftShoulderDiameter)
self._tranForm.aftShoulderLengthInput.textEdited.connect(
self.onAftShoulderLength)
self._tranForm.aftShoulderThicknessInput.textEdited.connect(
self.onAftShoulderThickness)
self._db.dbLoad.connect(self.onLookup)
self.update()
if mode == 0: # fresh created
self._obj.Proxy.execute(self._obj) # calculate once
FreeCAD.Gui.SendMsgToActiveView("ViewFit")
def transferTo(self):
"Transfer from the dialog to the object"
self._obj.TransitionType = str(
self._tranForm.transitionTypesCombo.currentText())
self._obj.TransitionStyle = str(
self._tranForm.transitionStylesCombo.currentText())
self._obj.Length = self._tranForm.lengthInput.text()
self._obj.ForeDiameter = self._tranForm.foreDiameterInput.text()
self._obj.AftDiameter = self._tranForm.aftDiameterInput.text()
self._obj.CoreDiameter = self._tranForm.coreDiameterInput.text()
self._obj.Thickness = self._tranForm.thicknessInput.text()
self._obj.Coefficient = _toFloat(
self._tranForm.coefficientInput.text())
self._obj.Clipped = self._tranForm.clippedCheckbox.isChecked()
self._obj.ForeShoulder = self._tranForm.foreShoulderCheckbox.isChecked(
)
self._obj.ForeShoulderDiameter = self._tranForm.foreShoulderDiameterInput.text(
)
self._obj.ForeShoulderLength = self._tranForm.foreShoulderLengthInput.text(
)
self._obj.ForeShoulderThickness = self._tranForm.foreShoulderThicknessInput.text(
)
self._obj.AftShoulder = self._tranForm.aftShoulderCheckbox.isChecked()
self._obj.AftShoulderDiameter = self._tranForm.aftShoulderDiameterInput.text(
)
self._obj.AftShoulderLength = self._tranForm.aftShoulderLengthInput.text(
)
self._obj.AftShoulderThickness = self._tranForm.aftShoulderThicknessInput.text(
)
def transferFrom(self):
"Transfer from the object to the dialog"
self._tranForm.transitionTypesCombo.setCurrentText(
self._obj.TransitionType)
self._tranForm.transitionStylesCombo.setCurrentText(
self._obj.TransitionStyle)
self._tranForm.lengthInput.setText(self._obj.Length.UserString)
self._tranForm.foreDiameterInput.setText(
self._obj.ForeDiameter.UserString)
self._tranForm.aftDiameterInput.setText(
self._obj.AftDiameter.UserString)
self._tranForm.coreDiameterInput.setText(
self._obj.CoreDiameter.UserString)
self._tranForm.thicknessInput.setText(self._obj.Thickness.UserString)
self._tranForm.coefficientInput.setText("%f" % self._obj.Coefficient)
self._tranForm.clippedCheckbox.setChecked(self._obj.Clipped)
self._tranForm.foreShoulderCheckbox.setChecked(self._obj.ForeShoulder)
self._tranForm.foreShoulderDiameterInput.setText(
self._obj.ForeShoulderDiameter.UserString)
self._tranForm.foreShoulderLengthInput.setText(
self._obj.ForeShoulderLength.UserString)
self._tranForm.foreShoulderThicknessInput.setText(
self._obj.ForeShoulderThickness.UserString)
self._tranForm.aftShoulderCheckbox.setChecked(self._obj.AftShoulder)
self._tranForm.aftShoulderDiameterInput.setText(
self._obj.AftShoulderDiameter.UserString)
self._tranForm.aftShoulderLengthInput.setText(
self._obj.AftShoulderLength.UserString)
self._tranForm.aftShoulderThicknessInput.setText(
self._obj.AftShoulderThickness.UserString)
self._showTransitionType()
self._showClippable()
self._showTransitionStyle()
def _showClippable(self):
if str(self._obj.TransitionType) in [TYPE_CONE, TYPE_OGIVE]:
# These types aren't clippable
self._obj.Clipped = False
self._tranForm.clippedCheckbox.setChecked(self._obj.Clipped)
self._tranForm.clippedCheckbox.setEnabled(False)
else:
self._tranForm.clippedCheckbox.setEnabled(True)
def _showTransitionType(self):
value = self._obj.TransitionType
if value == TYPE_HAACK or value == TYPE_PARABOLIC:
self._tranForm.coefficientInput.setEnabled(True)
elif value == TYPE_POWER:
self._tranForm.coefficientInput.setEnabled(True)
elif value == TYPE_PARABOLA:
# Set the coefficient, but don't enable it
self._obj.Coefficient = 0.5
self._tranForm.coefficientInput.setText("%f" %
self._obj.Coefficient)
self._tranForm.coefficientInput.setEnabled(False)
elif value == TYPE_VON_KARMAN:
# Set the coefficient, but don't enable it
self._obj.Coefficient = 0.0
self._tranForm.coefficientInput.setText("%f" %
self._obj.Coefficient)
self._tranForm.coefficientInput.setEnabled(False)
else:
self._tranForm.coefficientInput.setEnabled(False)
def onTransitionType(self, value):
self._obj.TransitionType = value
self._showTransitionType()
self._showClippable()
self._obj.Proxy.execute(self._obj)
def _showTransitionStyle(self):
value = self._obj.TransitionStyle
if value == STYLE_HOLLOW or value == STYLE_CAPPED:
self._tranForm.thicknessInput.setEnabled(True)
self._tranForm.coreDiameterInput.setEnabled(False)
if self._tranForm.foreShoulderCheckbox.isChecked():
self._tranForm.foreShoulderThicknessInput.setEnabled(True)
else:
self._tranForm.foreShoulderThicknessInput.setEnabled(False)
if self._tranForm.aftShoulderCheckbox.isChecked():
self._tranForm.aftShoulderThicknessInput.setEnabled(True)
else:
self._tranForm.aftShoulderThicknessInput.setEnabled(False)
elif value == STYLE_SOLID_CORE:
self._tranForm.thicknessInput.setEnabled(False)
self._tranForm.coreDiameterInput.setEnabled(True)
self._tranForm.foreShoulderThicknessInput.setEnabled(False)
self._tranForm.aftShoulderThicknessInput.setEnabled(False)
else:
self._tranForm.thicknessInput.setEnabled(False)
self._tranForm.coreDiameterInput.setEnabled(False)
self._tranForm.foreShoulderThicknessInput.setEnabled(False)
self._tranForm.aftShoulderThicknessInput.setEnabled(False)
def onTransitionStyle(self, value):
self._obj.TransitionStyle = value
self._showTransitionStyle()
self._obj.Proxy.execute(self._obj)
def onLength(self, value):
try:
self._obj.Length = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onForeDiameter(self, value):
try:
self._obj.ForeDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onAftDiameter(self, value):
try:
self._obj.AftDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onCoreDiameter(self, value):
try:
self._obj.CoreDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onThickness(self, value):
try:
self._obj.Thickness = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onCoefficient(self, value):
self._obj.Coefficient = _toFloat(value)
self._obj.Proxy.execute(self._obj)
def onClipped(self, value):
self._obj.Clipped = self._tranForm.clippedCheckbox.isChecked()
self._obj.Proxy.execute(self._obj)
def onForeShoulder(self, value):
self._obj.ForeShoulder = self._tranForm.foreShoulderCheckbox.isChecked(
)
if self._obj.ForeShoulder:
self._tranForm.foreShoulderDiameterInput.setEnabled(True)
self._tranForm.foreShoulderLengthInput.setEnabled(True)
selectedText = self._tranForm.transitionStylesCombo.currentText()
if selectedText == STYLE_HOLLOW or selectedText == STYLE_CAPPED:
self._tranForm.foreShoulderThicknessInput.setEnabled(True)
else:
self._tranForm.foreShoulderThicknessInput.setEnabled(False)
else:
self._tranForm.foreShoulderDiameterInput.setEnabled(False)
self._tranForm.foreShoulderLengthInput.setEnabled(False)
self._tranForm.foreShoulderThicknessInput.setEnabled(False)
self._obj.Proxy.execute(self._obj)
def onForeShoulderDiameter(self, value):
try:
self._obj.ForeShoulderDiameter = FreeCAD.Units.Quantity(
value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onForeShoulderLength(self, value):
try:
self._obj.ForeShoulderLength = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onForeShoulderThickness(self, value):
try:
self._obj.ForeShoulderThickness = FreeCAD.Units.Quantity(
value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onAftShoulder(self, value):
self._obj.AftShoulder = self._tranForm.aftShoulderCheckbox.isChecked()
if self._obj.AftShoulder:
self._tranForm.aftShoulderDiameterInput.setEnabled(True)
self._tranForm.aftShoulderLengthInput.setEnabled(True)
selectedText = self._tranForm.transitionStylesCombo.currentText()
if selectedText == STYLE_HOLLOW or selectedText == STYLE_CAPPED:
self._tranForm.aftShoulderThicknessInput.setEnabled(True)
else:
self._tranForm.aftShoulderThicknessInput.setEnabled(False)
else:
self._tranForm.aftShoulderDiameterInput.setEnabled(False)
self._tranForm.aftShoulderLengthInput.setEnabled(False)
self._tranForm.aftShoulderThicknessInput.setEnabled(False)
self._obj.Proxy.execute(self._obj)
def onAftShoulderDiameter(self, value):
try:
self._obj.AftShoulderDiameter = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onAftShoulderLength(self, value):
try:
self._obj.AftShoulderLength = FreeCAD.Units.Quantity(value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onAftShoulderThickness(self, value):
try:
self._obj.AftShoulderThickness = FreeCAD.Units.Quantity(
value).Value
self._obj.Proxy.execute(self._obj)
except ValueError:
pass
def onLookup(self):
result = self._db.getLookupResult()
self._obj.TransitionType = str(result["shape"])
self._obj.TransitionStyle = str(result["style"])
self._obj.Length = _valueWithUnits(result["length"],
result["length_units"])
self._obj.ForeDiameter = _valueWithUnits(
result["fore_outside_diameter"],
result["fore_outside_diameter_units"])
self._obj.AftDiameter = _valueWithUnits(
result["aft_outside_diameter"],
result["aft_outside_diameter_units"])
self._obj.CoreDiameter = 0.0
self._obj.Thickness = _valueWithUnits(result["thickness"],
result["thickness_units"])
self._obj.Coefficient = 0.0
self._obj.Clipped = True
self._obj.ForeShoulderDiameter = _valueWithUnits(
result["fore_shoulder_diameter"],
result["fore_shoulder_diameter_units"])
self._obj.ForeShoulderLength = _valueWithUnits(
result["fore_shoulder_length"],
result["fore_shoulder_length_units"])
self._obj.ForeShoulderThickness = self._obj.Thickness
self._obj.AftShoulderDiameter = _valueWithUnits(
result["aft_shoulder_diameter"],
result["aft_shoulder_diameter_units"])
self._obj.AftShoulderLength = _valueWithUnits(
result["aft_shoulder_length"], result["aft_shoulder_length_units"])
self._obj.AftShoulderThickness = self._obj.Thickness
self._obj.ForeShoulder = (self._obj.ForeShoulderDiameter >
0.0) and (self._obj.ForeShoulderLength >= 0)
self._obj.AftShoulder = (self._obj.AftShoulderDiameter >
0.0) and (self._obj.AftShoulderLength >= 0)
self.update()
self._obj.Proxy.execute(self._obj)
def getStandardButtons(self):
return int(QtGui.QDialogButtonBox.Ok) | int(
QtGui.QDialogButtonBox.Cancel) | int(QtGui.QDialogButtonBox.Apply)
def clicked(self, button):
if button == QtGui.QDialogButtonBox.Apply:
#print "Apply"
self.transferTo()
self._obj.Proxy.execute(self._obj)
def update(self):
'fills the widgets'
self.transferFrom()
def accept(self):
self.transferTo()
FreeCAD.ActiveDocument.recompute()
FreeCADGui.ActiveDocument.resetEdit()
def reject(self):
FreeCAD.ActiveDocument.abortTransaction()
FreeCAD.ActiveDocument.recompute()
FreeCADGui.ActiveDocument.resetEdit()