class DashboardReporterTest(unittest.TestCase):
"""
_DashboardReporterTest_
Unit tests for the dashboard reporter class.
"""
def setUp(self):
"""
_setUp_
Setup a dashboard reporter
"""
self.reporter = DashboardReporter(config=None)
self.processingReport = ProcessingSample.report
self.mergeReport = MergeSample.report
self.errorReport = ErrorSample.report
return
def tearDown(self):
"""
_tearDown_
Just get out
"""
pass
def trimNoneValues(self, package):
"""
_trimNoneValues_
Simple utility to trim the None values of a dictionary
"""
trimmed = {}
for key in package:
if package[key] != None:
trimmed[key] = package[key]
return trimmed
def createTestJob(self, fwjr):
"""
_createTestJob_
Creates a minimal job to report
"""
job = Job('finishedJob')
job['retry_count'] = 1
job['workflow'] = 'testWorkflow'
job['fwjr'] = fwjr
return job
def testHandleSteps(self):
"""
_testHandleSteps_
Check that we can extract the information from a completed job
and report it
"""
job = self.createTestJob(self.processingReport)
self.reporter.handleSteps(job)
job = self.createTestJob(self.mergeReport)
self.reporter.handleSteps(job)
job = self.createTestJob(self.errorReport)
self.reporter.handleSteps(job)
def testPerformanceReport(self):
"""
_testPerformanceReport_
Check that the performance information is extracted correctly for
different reports
"""
step = self.processingReport.retrieveStep('cmsRun1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(len(self.trimNoneValues(perfInfo)), 21,
'Found less information than expected')
self.assertEqual(perfInfo['PeakValueRss'], '891.617',
'Values do not match')
self.assertEqual(perfInfo['readCachePercentageOps'], 0.995779157341,
'Values do not match')
self.assertEqual(perfInfo['MaxEventTime'], '3.32538',
'Values do not match')
step = self.processingReport.retrieveStep('logArch1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'logArch1 performance info is not empty')
step = self.processingReport.retrieveStep('stageOut1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'stageOut1 performance info is not empty')
step = self.errorReport.retrieveStep('cmsRun1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'cmsRun1 performance info is not empty')
step = self.errorReport.retrieveStep('logArch1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'logArch1 performance info is not empty')
step = self.errorReport.retrieveStep('stageOut1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'stageOut1 performance info is not empty')
def testEventInformationReport(self):
"""
_testEventInformationReport_
Check that the event information is extracted correctly for
different reports
"""
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.processingReport)
self.assertEqual(eventInfo['inputEvents'], 18192,
'Input events do not match')
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-WElectron-PromptSkim-v1:USER:1603'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-LogErrorMonitor-PromptSkim-v1:USER:137'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-LogError-PromptSkim-v1:RAW-RECO:66'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-TOPElePlusJets-PromptSkim-v1:AOD:2320'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-HighMET-PromptSkim-v1:RAW-RECO:8'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-DiTau-PromptSkim-v1:RAW-RECO:192'), 1)
eventInfo = self.reporter.getEventInformation('stageOut1',
self.processingReport)
self.assertEqual(eventInfo, {}, 'stageOut1 event info is not empty')
eventInfo = self.reporter.getEventInformation('logArch1',
self.processingReport)
self.assertEqual(eventInfo, {}, 'logArch1 event info is not empty')
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.mergeReport)
self.assertEqual(eventInfo['inputEvents'], 0,
'Input events do not match')
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-LogError-PromptSkim-v1:RAW-RECO:0'), 1)
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.errorReport)
self.assertEqual(eventInfo, {}, 'Error report event info is not empty')
class DashboardReporterTest(unittest.TestCase):
"""
_DashboardReporterTest_
Unit tests for the dashboard reporter class.
"""
def setUp(self):
"""
_setUp_
Setup a dashboard reporter
"""
self.reporter = DashboardReporter(config=None)
self.processingReport = ProcessingSample.report
self.mergeReport = MergeSample.report
self.errorReport = ErrorSample.report
self.fallbackReport = FallbackSample.report
self.twoFileFallbackXmlPath = os.path.join(
getTestBase(), "WMCore_t/FwkJobReport_t/CMSSWTwoFileRemote.xml")
self.pileupXmlPath = os.path.join(
getTestBase(), "WMCore_t/FwkJobReport_t/CMSSWPileup.xml")
return
def tearDown(self):
"""
_tearDown_
Just get out
"""
pass
def trimNoneValues(self, package):
"""
_trimNoneValues_
Simple utility to trim the None values of a dictionary
"""
trimmed = {}
for key in package:
if package[key] != None:
trimmed[key] = package[key]
return trimmed
def createTestJob(self, fwjr):
"""
_createTestJob_
Creates a minimal job to report
"""
job = Job('finishedJob')
job['retry_count'] = 1
job['workflow'] = 'testWorkflow'
job['fwjr'] = fwjr
return job
def testHandleSteps(self):
"""
_testHandleSteps_
Check that we can extract the information from a completed job
and report it
"""
job = self.createTestJob(self.processingReport)
self.reporter.handleSteps(job)
job = self.createTestJob(self.mergeReport)
self.reporter.handleSteps(job)
job = self.createTestJob(self.errorReport)
self.reporter.handleSteps(job)
def testPerformanceReport(self):
"""
_testPerformanceReport_
Check that the performance information is extracted correctly for
different reports
"""
step = self.processingReport.retrieveStep('cmsRun1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(len(self.trimNoneValues(perfInfo)), 21,
'Found less information than expected')
self.assertEqual(perfInfo['PeakValueRss'], '891.617',
'Values do not match')
self.assertEqual(perfInfo['readCachePercentageOps'], 0.995779157341,
'Values do not match')
self.assertEqual(perfInfo['MaxEventTime'], '3.32538',
'Values do not match')
step = self.processingReport.retrieveStep('logArch1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'logArch1 performance info is not empty')
step = self.processingReport.retrieveStep('stageOut1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'stageOut1 performance info is not empty')
step = self.errorReport.retrieveStep('cmsRun1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'cmsRun1 performance info is not empty')
step = self.errorReport.retrieveStep('logArch1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'logArch1 performance info is not empty')
step = self.errorReport.retrieveStep('stageOut1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'stageOut1 performance info is not empty')
def testEventInformationReport(self):
"""
_testEventInformationReport_
Check that the event information is extracted correctly for
different reports
"""
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.processingReport)
self.assertEqual(eventInfo['inputEvents'], 18192,
'Input events do not match')
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-WElectron-PromptSkim-v1:USER:1603'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-LogErrorMonitor-PromptSkim-v1:USER:137'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-LogError-PromptSkim-v1:RAW-RECO:66'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-TOPElePlusJets-PromptSkim-v1:AOD:2320'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-HighMET-PromptSkim-v1:RAW-RECO:8'), 1)
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-DiTau-PromptSkim-v1:RAW-RECO:192'), 1)
eventInfo = self.reporter.getEventInformation('stageOut1',
self.processingReport)
self.assertEqual(eventInfo, {}, 'stageOut1 event info is not empty')
eventInfo = self.reporter.getEventInformation('logArch1',
self.processingReport)
self.assertEqual(eventInfo, {}, 'logArch1 event info is not empty')
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.mergeReport)
self.assertEqual(eventInfo['inputEvents'], 0,
'Input events do not match')
self.assertEqual(
eventInfo['OutputEventInfo'].count(
'Run2012B-LogError-PromptSkim-v1:RAW-RECO:0'), 1)
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.errorReport)
self.assertEqual(eventInfo, {}, 'Error report event info is not empty')
def testFileInformation(self):
"""
_testFileInformation_
Check that the file information is extracted correctly for
different reports
"""
# First test the processingReport
step = self.processingReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(2, len(fileReports))
# Format is LFN, Status, Type (EDM), Local/Remote, Count
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
report1 = (fileInfo['inputFiles'].split(';'))[1].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('1', report1[1])
self.assertEqual('Local', report0[3])
self.assertEqual('Local', report1[3])
self.assertEqual('1', report0[4])
self.assertEqual('2', report1[4])
step = self.processingReport.retrieveStep('logArch1')
fileInfo = self.reporter.getInputFilesInformation(step)
self.assertEqual(self.trimNoneValues(fileInfo), {},
'logArch1 file info is not empty')
step = self.processingReport.retrieveStep('stageOut1')
fileInfo = self.reporter.getInputFilesInformation(step)
self.assertEqual(self.trimNoneValues(fileInfo), {},
'stageOut1 file info is not empty')
# Now shorter test on mergeReport
step = self.mergeReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(1, len(fileReports))
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('Local', report0[3])
self.assertEqual('1', report0[4])
# Now shorter test on errorReport
step = self.errorReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(2, len(fileReports))
# Format is LFN, Status, Type (EDM), Local/Remote, Count
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
report1 = (fileInfo['inputFiles'].split(';'))[1].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('0', report1[1])
self.assertEqual('Local', report0[3])
self.assertEqual('Local', report1[3])
self.assertEqual('1', report0[4])
self.assertEqual('2', report1[4])
# And tests on the fallback report
step = self.fallbackReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(1, len(fileReports))
# Format is LFN, Status, Type (EDM), Local/Remote, Count
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('Remote', report0[3])
self.assertEqual('1', report0[4])
# And tests on a report of two fallback files
twoReport = Report("cmsRun1")
twoReport.parse(self.twoFileFallbackXmlPath)
step = twoReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(2, len(fileReports))
# Format is LFN, Status, Type (EDM), Local/Remote, Count
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
report1 = (fileInfo['inputFiles'].split(';'))[1].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('1', report1[1])
self.assertEqual('Remote', report0[3])
self.assertEqual('Remote', report1[3])
self.assertEqual('1', report0[4])
self.assertEqual('2', report1[4])
pileupReport = Report("cmsRun1")
pileupReport.parse(self.pileupXmlPath)
step = pileupReport.retrieveStep('cmsRun1')
localCount = 0
remoteCount = 0
for report in (self.reporter.getInputFilesInformation(step)
)['inputFiles'].split(';'):
if (report.split('::'))[3] == 'Remote':
remoteCount += 1
elif (report.split('::'))[3] == 'Local':
localCount += 1
self.assertEqual(1, remoteCount)
self.assertEqual(13, localCount)
class DashboardReporterTest(unittest.TestCase):
"""
_DashboardReporterTest_
Unit tests for the dashboard reporter class.
"""
def setUp(self):
"""
_setUp_
Setup a dashboard reporter
"""
self.reporter = DashboardReporter(config = None)
self.processingReport = ProcessingSample.report
self.mergeReport = MergeSample.report
self.errorReport = ErrorSample.report
return
def tearDown(self):
"""
_tearDown_
Just get out
"""
pass
def trimNoneValues(self, package):
"""
_trimNoneValues_
Simple utility to trim the None values of a dictionary
"""
trimmed = {}
for key in package:
if package[key] != None:
trimmed[key] = package[key]
return trimmed
def createTestJob(self, fwjr):
"""
_createTestJob_
Creates a minimal job to report
"""
job = Job('finishedJob')
job['retry_count'] = 1
job['workflow'] = 'testWorkflow'
job['fwjr'] = fwjr
return job
def testHandleSteps(self):
"""
_testHandleSteps_
Check that we can extract the information from a completed job
and report it
"""
job = self.createTestJob(self.processingReport)
self.reporter.handleSteps(job)
job = self.createTestJob(self.mergeReport)
self.reporter.handleSteps(job)
job = self.createTestJob(self.errorReport)
self.reporter.handleSteps(job)
def testPerformanceReport(self):
"""
_testPerformanceReport_
Check that the performance information is extracted correctly for
different reports
"""
step = self.processingReport.retrieveStep('cmsRun1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(len(self.trimNoneValues(perfInfo)), 21,
'Found less information than expected')
self.assertEqual(perfInfo['PeakValueRss'], '891.617',
'Values do not match')
self.assertEqual(perfInfo['readCachePercentageOps'], 0.995779157341,
'Values do not match')
self.assertEqual(perfInfo['MaxEventTime'], '3.32538',
'Values do not match')
step = self.processingReport.retrieveStep('logArch1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'logArch1 performance info is not empty')
step = self.processingReport.retrieveStep('stageOut1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'stageOut1 performance info is not empty')
step = self.errorReport.retrieveStep('cmsRun1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'cmsRun1 performance info is not empty')
step = self.errorReport.retrieveStep('logArch1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'logArch1 performance info is not empty')
step = self.errorReport.retrieveStep('stageOut1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'stageOut1 performance info is not empty')
def testEventInformationReport(self):
"""
_testEventInformationReport_
Check that the event information is extracted correctly for
different reports
"""
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.processingReport)
self.assertEqual(eventInfo['inputEvents'], 18192,
'Input events do not match')
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-WElectron-PromptSkim-v1:USER:1603'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-LogErrorMonitor-PromptSkim-v1:USER:137'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-LogError-PromptSkim-v1:RAW-RECO:66'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-TOPElePlusJets-PromptSkim-v1:AOD:2320'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-HighMET-PromptSkim-v1:RAW-RECO:8'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-DiTau-PromptSkim-v1:RAW-RECO:192'), 1)
eventInfo = self.reporter.getEventInformation('stageOut1',
self.processingReport)
self.assertEqual(eventInfo, {},
'stageOut1 event info is not empty')
eventInfo = self.reporter.getEventInformation('logArch1',
self.processingReport)
self.assertEqual(eventInfo, {},
'logArch1 event info is not empty')
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.mergeReport)
self.assertEqual(eventInfo['inputEvents'], 0,
'Input events do not match')
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-LogError-PromptSkim-v1:RAW-RECO:0'), 1)
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.errorReport)
self.assertEqual(eventInfo, {},
'Error report event info is not empty')
class DashboardReporterTest(unittest.TestCase):
"""
_DashboardReporterTest_
Unit tests for the dashboard reporter class.
"""
def setUp(self):
"""
_setUp_
Setup a dashboard reporter
"""
self.reporter = DashboardReporter(config=None)
self.processingReport = ProcessingSample.report
self.mergeReport = MergeSample.report
self.errorReport = ErrorSample.report
self.fallbackReport = FallbackSample.report
self.twoFileFallbackXmlPath = os.path.join(getTestBase(), "WMCore_t/FwkJobReport_t/CMSSWTwoFileRemote.xml")
self.pileupXmlPath = os.path.join(getTestBase(), "WMCore_t/FwkJobReport_t/CMSSWPileup.xml")
return
def tearDown(self):
"""
_tearDown_
Just get out
"""
pass
def trimNoneValues(self, package):
"""
_trimNoneValues_
Simple utility to trim the None values of a dictionary
"""
trimmed = {}
for key in package:
if package[key] != None:
trimmed[key] = package[key]
return trimmed
def createTestJob(self, fwjr):
"""
_createTestJob_
Creates a minimal job to report
"""
job = Job('finishedJob')
job['retry_count'] = 1
job['workflow'] = 'testWorkflow'
job['fwjr'] = fwjr
return job
def testHandleSteps(self):
"""
_testHandleSteps_
Check that we can extract the information from a completed job
and report it
"""
job = self.createTestJob(self.processingReport)
self.reporter.handleSteps(job)
job = self.createTestJob(self.mergeReport)
self.reporter.handleSteps(job)
job = self.createTestJob(self.errorReport)
self.reporter.handleSteps(job)
def testPerformanceReport(self):
"""
_testPerformanceReport_
Check that the performance information is extracted correctly for
different reports
"""
step = self.processingReport.retrieveStep('cmsRun1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(len(self.trimNoneValues(perfInfo)), 21,
'Found less information than expected')
self.assertEqual(perfInfo['PeakValueRss'], '891.617',
'Values do not match')
self.assertEqual(perfInfo['readCachePercentageOps'], 0.995779157341,
'Values do not match')
self.assertEqual(perfInfo['MaxEventTime'], '3.32538',
'Values do not match')
step = self.processingReport.retrieveStep('logArch1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'logArch1 performance info is not empty')
step = self.processingReport.retrieveStep('stageOut1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'stageOut1 performance info is not empty')
step = self.errorReport.retrieveStep('cmsRun1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'cmsRun1 performance info is not empty')
step = self.errorReport.retrieveStep('logArch1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'logArch1 performance info is not empty')
step = self.errorReport.retrieveStep('stageOut1')
perfInfo = self.reporter.getPerformanceInformation(step)
self.assertEqual(self.trimNoneValues(perfInfo), {},
'stageOut1 performance info is not empty')
def testEventInformationReport(self):
"""
_testEventInformationReport_
Check that the event information is extracted correctly for
different reports
"""
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.processingReport)
self.assertEqual(eventInfo['inputEvents'], 18192,
'Input events do not match')
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-WElectron-PromptSkim-v1:USER:1603'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-LogErrorMonitor-PromptSkim-v1:USER:137'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-LogError-PromptSkim-v1:RAW-RECO:66'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-TOPElePlusJets-PromptSkim-v1:AOD:2320'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-HighMET-PromptSkim-v1:RAW-RECO:8'), 1)
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-DiTau-PromptSkim-v1:RAW-RECO:192'), 1)
eventInfo = self.reporter.getEventInformation('stageOut1',
self.processingReport)
self.assertEqual(eventInfo, {},
'stageOut1 event info is not empty')
eventInfo = self.reporter.getEventInformation('logArch1',
self.processingReport)
self.assertEqual(eventInfo, {},
'logArch1 event info is not empty')
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.mergeReport)
self.assertEqual(eventInfo['inputEvents'], 0,
'Input events do not match')
self.assertEqual(eventInfo['OutputEventInfo'].count('Run2012B-LogError-PromptSkim-v1:RAW-RECO:0'), 1)
eventInfo = self.reporter.getEventInformation('cmsRun1',
self.errorReport)
self.assertEqual(eventInfo, {},
'Error report event info is not empty')
def testFileInformation(self):
"""
_testFileInformation_
Check that the file information is extracted correctly for
different reports
"""
# First test the processingReport
step = self.processingReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(2, len(fileReports))
# Format is LFN, Status, Type (EDM), Local/Remote, Count
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
report1 = (fileInfo['inputFiles'].split(';'))[1].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('1', report1[1])
self.assertEqual('Local', report0[3])
self.assertEqual('Local', report1[3])
self.assertEqual('1', report0[4])
self.assertEqual('2', report1[4])
step = self.processingReport.retrieveStep('logArch1')
fileInfo = self.reporter.getInputFilesInformation(step)
self.assertEqual(self.trimNoneValues(fileInfo), {},
'logArch1 file info is not empty')
step = self.processingReport.retrieveStep('stageOut1')
fileInfo = self.reporter.getInputFilesInformation(step)
self.assertEqual(self.trimNoneValues(fileInfo), {},
'stageOut1 file info is not empty')
# Now shorter test on mergeReport
step = self.mergeReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(1, len(fileReports))
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('Local', report0[3])
self.assertEqual('1', report0[4])
# Now shorter test on errorReport
step = self.errorReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(2, len(fileReports))
# Format is LFN, Status, Type (EDM), Local/Remote, Count
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
report1 = (fileInfo['inputFiles'].split(';'))[1].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('0', report1[1])
self.assertEqual('Local', report0[3])
self.assertEqual('Local', report1[3])
self.assertEqual('1', report0[4])
self.assertEqual('2', report1[4])
# And tests on the fallback report
step = self.fallbackReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(1, len(fileReports))
# Format is LFN, Status, Type (EDM), Local/Remote, Count
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('Remote', report0[3])
self.assertEqual('1', report0[4])
# And tests on a report of two fallback files
twoReport = Report("cmsRun1")
twoReport.parse(self.twoFileFallbackXmlPath)
step = twoReport.retrieveStep('cmsRun1')
fileInfo = self.reporter.getInputFilesInformation(step)
fileReports = fileInfo['inputFiles'].split(';')
self.assertEqual(2, len(fileReports))
# Format is LFN, Status, Type (EDM), Local/Remote, Count
report0 = (fileInfo['inputFiles'].split(';'))[0].split('::')
report1 = (fileInfo['inputFiles'].split(';'))[1].split('::')
self.assertEqual('1', report0[1])
self.assertEqual('1', report1[1])
self.assertEqual('Remote', report0[3])
self.assertEqual('Remote', report1[3])
self.assertEqual('1', report0[4])
self.assertEqual('2', report1[4])
pileupReport = Report("cmsRun1")
pileupReport.parse(self.pileupXmlPath)
step = pileupReport.retrieveStep('cmsRun1')
localCount = 0
remoteCount = 0
for report in (self.reporter.getInputFilesInformation(step))['inputFiles'].split(';'):
if (report.split('::'))[3] == 'Remote':
remoteCount += 1
elif (report.split('::'))[3] == 'Local':
localCount += 1
self.assertEqual(1, remoteCount)
self.assertEqual(13, localCount)