heat_flow_dir = top_dir + "heat_flow/"
l_wire_list = [ #5,
2.7
] # in cm
exp_list = [14, 15, 16, 17]
T_cracker_list = [2400, 2200, 2000, 1800, 1000, 500, 300, 0]
f_arr_full = np.zeros(
(len(l_wire_list), len(exp_list), len(T_cracker_list), 6))
for n_lw, l_wire in enumerate(l_wire_list):
for n_phi, phi_exp in enumerate(exp_list):
for n_T, T_cracker in enumerate(T_cracker_list):
run_name = "lw_{}_phi_{}_Tc_{}".format(l_wire, phi_exp, T_cracker)
wire = Wire()
wire = wire.load(top_dir + "results\\" + run_name)
wire.plot_heat_flow(top_dir + "plots\\" +
"heat_flow/log_{}".format(run_name),
log_y=True)
i = wire.n_wire_elements // 2
elem = [
wire.f_el(i),
wire.f_conduction(i),
wire.f_rad(i),
wire.f_beam(i),
wire.f_beam_gas(i),
wire.f_bb(i)
]
f_arr_full[n_lw, n_phi, n_T] = elem
# Plot scaling of Heat flow with temperature with various
fig = plt.figure(0, figsize=(8,6.5))
ax1=plt.gca()
top_dir_list = ["20um_phi_beam_sweep_taylor/", "20um_phi_beam_sweep/"]
#top_dir_list = ["10um_phi_beam_sweep_taylor/", "10um_phi_beam_sweep/"]
#top_dir_list = ["5um_phi_beam_sweep_taylor/", "5um_phi_beam_sweep/"]
label_list = [r"$F_{rad}$ Taylored", r"$F_{rad} \propto T^4$"]
exp_list = np.linspace(15,20,num = 21)
# Initialize Arrays
U_arr = np.zeros((len(top_dir_list), len(exp_list)))
T_max_arr = np.zeros((len(top_dir_list), len(exp_list)))
signal_arr = np.zeros((len(top_dir_list), len(exp_list)))
for j, top_dir in enumerate(top_dir_list):
for i, phi_exp in enumerate(exp_list):
wire = Wire()
wire = wire.load(top_dir + "phi_to_{}".format(phi_exp))
U_beam_off = wire.U_wire(0)
U_beam_on = wire.U_wire(-1)
U_delta = U_arr[j, i] = U_beam_on - U_beam_off
signal = signal_arr[j, i] = U_delta / U_beam_off
T_max = T_max_arr[j, i] = np.amax(wire.record_dict["T_distribution"]
[-1])
phi_list = 10**exp_list
# Plot delta U vs Phi in atoms/s
fig = plt.figure(0, figsize=(8,6.5))
ax1=plt.gca()
U_arr_full = np.zeros((len(l_wire_list), len(i_current_list)))
signal_arr_full = np.zeros((len(l_wire_list), len(i_current_list)))
for n_lw, l_wire in enumerate(l_wire_list):
# Initialize Arrays
U_arr = np.zeros((len(i_current_list)))
T_max_arr = np.zeros((len(i_current_list)))
T_avg_arr = np.zeros((len(i_current_list)))
signal_arr = np.zeros((len(i_current_list)))
R_arr = np.zeros((len(i_current_list)))
for n_i, i_current in enumerate(i_current_list):
run_name = "lw_{}_i_{}".format(l_wire, i_current)
#TODO Include enumerates, output plots for every i_current
wire = Wire()
#wire = wire.load(top_dir + "0.02mbar_air\\" + "results\\" + run_name)
wire = wire.load(top_dir + "0.02mbar_air_em_{}\\".format(emissivity) +
"results\\" + run_name)
#l_beam = wire.l_beam
U_beam_off = wire.U_wire(0)
U_beam_on = wire.U_wire(-1)
U_delta = U_arr[n_i] = U_beam_on - U_beam_off
signal = signal_arr[n_i] = U_delta / U_beam_off
T_max = T_max_arr[n_i] = np.amax(
wire.record_dict["T_distribution"][-1])
T_avg = T_avg_arr[n_i] = np.average(
wire.record_dict["T_distribution"][-1])
R_arr[n_i] = wire.resistance_total()
U_arr_full[n_lw] = U_arr
] # in cm
U_arr_full = np.zeros((len(l_wire_list), len(i_current_list)))
signal_arr_full = np.zeros((len(l_wire_list), len(i_current_list)))
for n_lw, l_wire in enumerate(l_wire_list):
# Initialize Arrays
U_arr = np.zeros((len(i_current_list)))
T_max_arr = np.zeros((len(i_current_list)))
T_avg_arr = np.zeros((len(i_current_list)))
signal_arr = np.zeros((len(i_current_list)))
R_arr = np.zeros((len(i_current_list)))
for n_i, i_current in enumerate(i_current_list):
run_name = "lw_{}_i_{}".format(l_wire, i_current)
#TODO Include enumerates, output plots for every i_current
wire = Wire()
wire = wire.load(top_dir + "0.02mbar_air\\" + "results\\" + run_name)
#l_beam = wire.l_beam
U_beam_off = wire.U_wire(0)
U_beam_on = wire.U_wire(-1)
U_delta = U_arr[n_i] = U_beam_on - U_beam_off
signal = signal_arr[n_i] = U_delta / U_beam_off
T_max = T_max_arr[n_i] = np.amax(
wire.record_dict["T_distribution"][-1])
T_avg = T_avg_arr[n_i] = np.average(
wire.record_dict["T_distribution"][-1])
R_arr[n_i] = wire.resistance_total()
U_arr_full[n_lw] = U_arr
import numpy as np
import matplotlib as mpl
import matplotlib.pyplot as plt
from matplotlib.animation import FuncAnimation
import matplotlib.patches as mpatches
import os
import dill
from Wire_detector import Wire
top_dir = os.path.dirname(os.path.abspath(__file__)) + "\\"
wire = Wire()
wire = wire.load("10um_phi_beam_sweep/" + "phi_to_17.0")
wire.taylor_f_rad = False
animate_dir = top_dir + "animate\\"
os.makedirs(animate_dir, exist_ok=True)
n_steps = 15000
record_steps = 150
time_step = 0.001
# ####### reproduce ohmic heating procedure
# wire_no_beam = wire
# wire_no_beam.T_base = None
# wire_no_beam.phi_beam = 0
# wire_no_beam.taylor_f_rad = False
# wire_no_beam.simulate(n_steps=n_steps, record_steps=record_steps,
# time_step=time_step)
# wire_no_beam.save(animate_dir + "base_heating")
# #######
wire_no_beam = Wire()
U_arr_full = np.zeros((len(l_wire_list), len(i_current_list)))
signal_arr_full = np.zeros((len(l_wire_list), len(i_current_list)))
for n_lw, l_wire in enumerate(l_wire_list):
# Initialize Arrays
U_arr = np.zeros((len(i_current_list)))
T_max_arr = np.zeros((len(i_current_list)))
T_avg_arr = np.zeros((len(i_current_list)))
signal_arr = np.zeros((len(i_current_list)))
R_arr = np.zeros((len(i_current_list)))
for n_i, i_current in enumerate(i_current_list):
run_name = "lw_{}_i_{}".format(l_wire, i_current)
#TODO Include enumerates, output plots for every i_current
wire = Wire()
#wire = wire.load(top_dir + "0.02mbar_air\\" + "results\\" + run_name)
wire = wire.load(top_dir +
"{}mbar_air_em_{}\\".format(pressure, emissivity) +
"results\\" + run_name)
wire.gen_k_heat_cond_function()
#l_beam = wire.l_beam
U_beam_off = wire.U_wire(0)
U_beam_on = wire.U_wire(-1)
U_delta = U_arr[n_i] = U_beam_on - U_beam_off
signal = signal_arr[n_i] = U_delta / U_beam_off
T_max = T_max_arr[n_i] = np.amax(
wire.record_dict["T_distribution"][-1])
T_avg = T_avg_arr[n_i] = np.average(
wire.record_dict["T_distribution"][-1])
