def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasPollLatencyErrorSeconds():
valPollLatencyErrorSeconds = Value()
if self.pollLatencyErrorSeconds is not None:
valPollLatencyErrorSeconds.setInt64(self.pollLatencyErrorSeconds)
else:
valPollLatencyErrorSeconds.setEmpty()
tagValueList.push(("poll-latency-error-seconds", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), valPollLatencyErrorSeconds)
if self.hasPollLatencyWarningSeconds():
valPollLatencyWarningSeconds = Value()
if self.pollLatencyWarningSeconds is not None:
valPollLatencyWarningSeconds.setInt64(self.pollLatencyWarningSeconds)
else:
valPollLatencyWarningSeconds.setEmpty()
tagValueList.push(("poll-latency-warning-seconds", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), valPollLatencyWarningSeconds)
return ReturnCodes.kOk
def _getSelfKeyPath (self, list
, junkForTemplate):
for logFunc in self._log('get-self-key-path').debug3Func(): logFunc('called. PARAMS, junkForTemplate=%s', junkForTemplate)
keyPath = KeyPath()
ancestorVal = Value()
ancestorVal.setInt64(list);
keyPath.addKeyPathPrefix(ancestorVal)
xmlVal = Value()
xmlVal.setXmlTag(("list", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms", "qt-sys-alarms"))
keyPath.addKeyPathPrefix(xmlVal)
xmlVal = Value()
xmlVal.setXmlTag(("alarms", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms", "qt-sys-alarms"))
keyPath.addKeyPathPrefix(xmlVal)
xmlVal = Value()
xmlVal.setXmlTag(("system", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system", "qt-sys"))
keyPath.addKeyPathPrefix(xmlVal)
xmlVal = Value()
xmlVal.setXmlTag(("tech", "http://qwilt.com/ns/yang/device/tech/qwilt-tech", "qt"))
keyPath.addKeyPathPrefix(xmlVal)
for logFunc in self._log('get-self-key-path-done').debug3Func(): logFunc('done. keyPath=%s. PARAMS', keyPath)
return keyPath
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasActivate():
valActivate = Value()
if self.activate is not None:
valActivate.setInt64(self.activate)
else:
valActivate.setEmpty()
tagValueList.push(
("activate",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"
), valActivate)
if self.hasGetStatus():
valGetStatus = Value()
if self.getStatus is not None:
valGetStatus.setInt64(self.getStatus)
else:
valGetStatus.setEmpty()
tagValueList.push(
("get-status",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"
), valGetStatus)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasWidth():
valWidth = Value()
if self.width is not None:
valWidth.setInt64(self.width)
else:
valWidth.setEmpty()
tagValueList.push(("width", "http://qwilt.com/model/lake-example"), valWidth)
if self.hasLength():
valLength = Value()
if self.length is not None:
valLength.setInt64(self.length)
else:
valLength.setEmpty()
tagValueList.push(("length", "http://qwilt.com/model/lake-example"), valLength)
if self.hasPatternName():
valPatternName = Value()
if self.patternName is not None:
valPatternName.setString(self.patternName)
else:
valPatternName.setEmpty()
tagValueList.push(("pattern-name", "http://qwilt.com/model/lake-example"), valPatternName)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasChannelQueueSize():
valChannelQueueSize = Value()
if self.channelQueueSize is not None:
valChannelQueueSize.setInt64(self.channelQueueSize)
else:
valChannelQueueSize.setEmpty()
tagValueList.push(("channel-queue-size", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valChannelQueueSize)
if self.hasMemSize():
valMemSize = Value()
if self.memSize is not None:
valMemSize.setInt64(self.memSize)
else:
valMemSize.setEmpty()
tagValueList.push(("mem-size", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valMemSize)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasCatalogId():
valCatalogId = Value()
if self.catalogId is not None:
valCatalogId.setInt64(self.catalogId)
else:
valCatalogId.setEmpty()
tagValueList.push(("catalog-id", "http://qwilt.com/model/room"), valCatalogId)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push(("name", "http://qwilt.com/model/room"), valName)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasLength():
valLength = Value()
if self.length is not None:
valLength.setInt64(self.length)
else:
valLength.setEmpty()
tagValueList.push(("length", "http://qwilt.com/model/family"), valLength)
if self.hasSmartness():
valSmartness = Value()
if self.smartness is not None:
valSmartness.setInt64(self.smartness)
else:
valSmartness.setEmpty()
tagValueList.push(("smartness", "http://qwilt.com/model/family"), valSmartness)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.configPs.keys():
if self.configPs[key]:
valBegin = Value()
(tag, ns, prefix) = ("config-p", "http://qwilt.com/model/oper", "oper")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setInt64(key)
tagValueList.push(("id", "http://qwilt.com/model/oper"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.configPs[key]._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-configP-failed').errorFunc(): logFunc('configP._fillReadTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasActivate():
valActivate = Value()
if self.activate is not None:
valActivate.setInt64(self.activate)
else:
valActivate.setEmpty()
tagValueList.push(("activate", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), valActivate)
if self.hasGetStatus():
valGetStatus = Value()
if self.getStatus is not None:
valGetStatus.setInt64(self.getStatus)
else:
valGetStatus.setEmpty()
tagValueList.push(("get-status", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), valGetStatus)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasWidth():
valWidth = Value()
if self.width is not None:
valWidth.setInt64(self.width)
else:
valWidth.setEmpty()
tagValueList.push(("width", "http://qwilt.com/model/lake-example"),
valWidth)
if self.hasLength():
valLength = Value()
if self.length is not None:
valLength.setInt64(self.length)
else:
valLength.setEmpty()
tagValueList.push(
("length", "http://qwilt.com/model/lake-example"), valLength)
if self.hasPatternName():
valPatternName = Value()
if self.patternName is not None:
valPatternName.setString(self.patternName)
else:
valPatternName.setEmpty()
tagValueList.push(
("pattern-name", "http://qwilt.com/model/lake-example"),
valPatternName)
return ReturnCodes.kOk
def _collectItemsToDelete (self,
itemsToDelete):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('collect-items-to-delete').debug3Func(): logFunc('called: itemsToDelete=%s. PARAMS', itemsToDelete)
for key in self.configPs.keys():
if self.configPs[key]:
res = self.configPs[key]._collectItemsToDelete(
key,
itemsToDelete)
if res != ReturnCodes.kOk:
for logFunc in self._log('collect-items-to-delete-configP-failed').errorFunc(): logFunc('configPObj._collectItemsToDelete() failed. key=%s. PARAMS', key)
return ReturnCodes.kGeneralError
else:
keyPath = self._getSelfKeyPath(
None)
xmlVal = Value()
xmlVal.setXmlTag(("config-p", "http://qwilt.com/model/oper", "oper"))
keyPath.addKeyPathPostfix(xmlVal)
valKey = Value()
valKey.setInt64(key)
keyPath.addKeyPathPostfix(valKey)
itemsToDelete.append(keyPath)
for logFunc in self._log('collect-items-to-delete-done').debug3Func(): logFunc('done: itemsToDelete=%s. PARAMS', itemsToDelete)
return ReturnCodes.kOk
def _getSelfKeyPath (self, opC
, junkForTemplate):
for logFunc in self._log('get-self-key-path').debug3Func(): logFunc('called. PARAMS, junkForTemplate=%s', junkForTemplate)
keyPath = KeyPath()
ancestorVal = Value()
ancestorVal.setInt64(opC);
keyPath.addKeyPathPrefix(ancestorVal)
xmlVal = Value()
xmlVal.setXmlTag(("op-c", "http://qwilt.com/model/oper", "oper"))
keyPath.addKeyPathPrefix(xmlVal)
xmlVal = Value()
xmlVal.setXmlTag(("op-b", "http://qwilt.com/model/oper", "oper"))
keyPath.addKeyPathPrefix(xmlVal)
xmlVal = Value()
xmlVal.setXmlTag(("config-a", "http://qwilt.com/model/oper", "oper"))
keyPath.addKeyPathPrefix(xmlVal)
for logFunc in self._log('get-self-key-path-done').debug3Func(): logFunc('done. keyPath=%s. PARAMS', keyPath)
return keyPath
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasLength():
valLength = Value()
if self.length is not None:
valLength.setInt64(self.length)
else:
valLength.setEmpty()
tagValueList.push(("length", "http://qwilt.com/model/tv"), valLength)
if self.hasBoringLevel():
valBoringLevel = Value()
if self.boringLevel is not None:
valBoringLevel.setInt64(self.boringLevel)
else:
valBoringLevel.setEmpty()
tagValueList.push(("boring-level", "http://qwilt.com/model/tv"), valBoringLevel)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasPollLatencyErrorSeconds():
valPollLatencyErrorSeconds = Value()
if self.pollLatencyErrorSeconds is not None:
valPollLatencyErrorSeconds.setInt64(
self.pollLatencyErrorSeconds)
else:
valPollLatencyErrorSeconds.setEmpty()
tagValueList.push(
("poll-latency-error-seconds",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"),
valPollLatencyErrorSeconds)
if self.hasPollLatencyWarningSeconds():
valPollLatencyWarningSeconds = Value()
if self.pollLatencyWarningSeconds is not None:
valPollLatencyWarningSeconds.setInt64(
self.pollLatencyWarningSeconds)
else:
valPollLatencyWarningSeconds.setEmpty()
tagValueList.push(
("poll-latency-warning-seconds",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"),
valPollLatencyWarningSeconds)
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isOpValueDRequested() and operData.hasOpValueD():
val = Value()
val.setInt64(operData.opValueD)
tagValueList.push(("op-value-d", "http://qwilt.com/model/oper"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _collectItemsToDelete (self,
itemsToDelete):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('collect-items-to-delete').debug3Func(): logFunc('called: itemsToDelete=%s. PARAMS', itemsToDelete)
for key in self.lists.keys():
if self.lists[key]:
res = self.lists[key]._collectItemsToDelete(
key,
itemsToDelete)
if res != ReturnCodes.kOk:
for logFunc in self._log('collect-items-to-delete-list-failed').errorFunc(): logFunc('listObj._collectItemsToDelete() failed. key=%s. PARAMS', key)
return ReturnCodes.kGeneralError
else:
keyPath = self._getSelfKeyPath(
None)
xmlVal = Value()
xmlVal.setXmlTag(("list", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms", "qt-sys-alarms"))
keyPath.addKeyPathPostfix(xmlVal)
valKey = Value()
valKey.setInt64(key)
keyPath.addKeyPathPostfix(valKey)
itemsToDelete.append(keyPath)
for logFunc in self._log('collect-items-to-delete-done').debug3Func(): logFunc('done: itemsToDelete=%s. PARAMS', itemsToDelete)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push(("name", "http://qwilt.com/model/lake-example"), valName)
if self.hasValue():
valValue = Value()
if self.value is not None:
valValue.setInt64(self.value)
else:
valValue.setEmpty()
tagValueList.push(("value", "http://qwilt.com/model/lake-example"), valValue)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.lists.keys():
if self.lists[key]:
valBegin = Value()
(tag, ns, prefix) = ("list", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms", "qt-sys-alarms")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setInt64(key)
tagValueList.push(("number", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.lists[key]._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-list-failed').errorFunc(): logFunc('list._fillReadTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _getSelfKeyPath (self, configP
, junkForTemplate):
for logFunc in self._log('get-self-key-path').debug3Func(): logFunc('called. PARAMS, junkForTemplate=%s', junkForTemplate)
keyPath = KeyPath()
xmlVal = Value()
xmlVal.setXmlTag(("op-r", "http://qwilt.com/model/oper", "oper"))
keyPath.addKeyPathPrefix(xmlVal)
ancestorVal = Value()
ancestorVal.setInt64(configP);
keyPath.addKeyPathPrefix(ancestorVal)
xmlVal = Value()
xmlVal.setXmlTag(("config-p", "http://qwilt.com/model/oper", "oper"))
keyPath.addKeyPathPrefix(xmlVal)
xmlVal = Value()
xmlVal.setXmlTag(("config-a", "http://qwilt.com/model/oper", "oper"))
keyPath.addKeyPathPrefix(xmlVal)
for logFunc in self._log('get-self-key-path-done').debug3Func(): logFunc('done. keyPath=%s. PARAMS', keyPath)
return keyPath
def _collectItemsToDelete(self, itemsToDelete):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('collect-items-to-delete').debug3Func():
logFunc('called: itemsToDelete=%s. PARAMS', itemsToDelete)
for key in self.opCs.keys():
if self.opCs[key]:
res = self.opCs[key]._collectItemsToDelete(key, itemsToDelete)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'collect-items-to-delete-opC-failed').errorFunc():
logFunc(
'opCObj._collectItemsToDelete() failed. key=%s. PARAMS',
key)
return ReturnCodes.kGeneralError
else:
keyPath = self._getSelfKeyPath(None)
xmlVal = Value()
xmlVal.setXmlTag(
("op-c", "http://qwilt.com/model/oper", "oper"))
keyPath.addKeyPathPostfix(xmlVal)
valKey = Value()
valKey.setInt64(key)
keyPath.addKeyPathPostfix(valKey)
itemsToDelete.append(keyPath)
for logFunc in self._log('collect-items-to-delete-done').debug3Func():
logFunc('done: itemsToDelete=%s. PARAMS', itemsToDelete)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasTrimContentItemSizeMb():
valTrimContentItemSizeMb = Value()
if self.trimContentItemSizeMb is not None:
valTrimContentItemSizeMb.setInt64(self.trimContentItemSizeMb)
else:
valTrimContentItemSizeMb.setEmpty()
tagValueList.push(
("trim-content-item-size-mb",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valTrimContentItemSizeMb)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push(
("name",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valName)
if self.systemDefaultsObj:
valBegin = Value()
(tag, ns, prefix) = (
"system-defaults",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line",
"qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.systemDefaultsObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-system-defaults-failed'
).errorFunc():
logFunc(
'systemDefaultsObj._fillWriteTagValues() failed. PARAMS'
)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push((
"name",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example"
), valName)
if self.hasHeight():
valHeight = Value()
if self.height is not None:
valHeight.setInt64(self.height)
else:
valHeight.setEmpty()
tagValueList.push((
"height",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example"
), valHeight)
if self.statusWrapperObj:
valBegin = Value()
(tag, ns, prefix) = (
"status-wrapper",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example",
"oe")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusWrapperObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-status-wrapper-failed'
).errorFunc():
logFunc(
'statusWrapperObj._fillWriteTagValues() failed. PARAMS'
)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValues(self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func():
logFunc("called. operData=%s, keyPath=%s, initialListSize=%d",
operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log(
"fill-tag-values-adding").debug3Func():
logFunc(
"adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d",
i, valBegin, self.myKeyPath.getLen())
i += 1
if operData.isIpValRequested() and operData.hasIpVal():
val = Value()
val.setIPv4(operData.ipVal)
tagValueList.push(("ip-val", "http://qwilt.com/model/oper"), val)
if operData.isIdRequested() and operData.hasId():
val = Value()
val.setInt64(operData.id)
tagValueList.push(("id", "http://qwilt.com/model/oper"), val)
if operData.isValRequested() and operData.hasVal():
val = Value()
val.setInt64(operData.val)
tagValueList.push(("val", "http://qwilt.com/model/oper"), val)
if operData.isIpPrefixValRequested() and operData.hasIpPrefixVal():
val = Value()
val.setIPv4Prefix(operData.ipPrefixVal)
tagValueList.push(("ip-prefix-val", "http://qwilt.com/model/oper"),
val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i -= 1
for logFunc in self._log("fill-tag-values-ended").debug3Func():
logFunc(
"ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize,
tagValueList.getLen())
return ReturnCodes.kOk
def getNext(self, trxContext, keypath, next):
for logFunc in self._log("get-next").debug3Func():
logFunc("called. keypath=%s, next=%s, trxContext=%s", keypath,
next, trxContext)
var = 0
isCompleted = True
if self.myIsActive:
if self.myGetNextFunctor:
timeoutGuardName = str(
self.myKeyPath) + "-" + "get-next-functor"
timeoutGuard = TimeoutGuard(
self._log, timeoutGuardName,
self.getFunctorTimeout(self.GET_NEXT_FUNCTOR),
self.getFunctorMildTimeout(self.GET_NEXT_FUNCTOR))
var_PBR = PassByRef(var)
next_PBR = PassByRef(next)
isCompleted_PBR = PassByRef(None)
res = self.myGetNextFunctor(trxContext, var_PBR, next_PBR,
isCompleted_PBR)
timeoutGuard.checkAndLog("application problem: functor=%s" %
self.myGetNextFunctor.__name__)
if res != ReturnCodes.kOk:
for logFunc in self._log(
"get-next-functor-failed").errorFunc():
logFunc(
"functor failed. res=%s, keypath=%s, trxContext=%s",
res, keypath, trxContext)
return ReturnCodes.kGeneralError
var = var_PBR.value()
next = next_PBR.value()
isCompleted = isCompleted_PBR.value()
for logFunc in self._log(
"get-next-send-next-key-functor-returned").debug3Func(
):
logFunc(
"functor returned. keypath=%s, trxContext=%s, var=%s, next=%s, isCompeted=%s",
keypath, trxContext, var, next, isCompleted)
nextKeyValue = Value()
if isCompleted == True:
nextKeyValue.setEmpty()
else:
nextKeyValue.setInt64(var)
res = self.myDomain.sendNextKeyValue(trxContext, nextKeyValue, next)
if res != ReturnCodes.kOk:
for logFunc in self._log(
"get-next-send-next-key-value-failed").errorFunc():
logFunc(
"domain.sendNextKeyValue() failed. res=%s, keypath=%s, trxContext=%s, nextKeyValue=%s, next=%s",
res, keypath, trxContext, nextKeyValue, next)
return ReturnCodes.kGeneralError
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasColor():
valColor = Value()
if self.color is not None:
valColor.setString(self.color)
else:
valColor.setEmpty()
tagValueList.push(("color", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), valColor)
if self.hasPretty():
valPretty = Value()
if self.pretty is not None:
valPretty.setBool(self.pretty)
else:
valPretty.setEmpty()
tagValueList.push(("pretty", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), valPretty)
if self.hasNumOfLegs():
valNumOfLegs = Value()
if self.numOfLegs is not None:
valNumOfLegs.setInt64(self.numOfLegs)
else:
valNumOfLegs.setEmpty()
tagValueList.push(("num-of-legs", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), valNumOfLegs)
if self.statusObj:
valBegin = Value()
(tag, ns, prefix) = ("status" , "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example", "se")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-status-failed').errorFunc(): logFunc('statusObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms"), valEnabled)
if self.hasRaiseTestAlarm():
valRaiseTestAlarm = Value()
if self.raiseTestAlarm is not None:
valRaiseTestAlarm.setBool(self.raiseTestAlarm)
else:
valRaiseTestAlarm.setEmpty()
tagValueList.push(("raise-test-alarm", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms"), valRaiseTestAlarm)
if self.hasPollInterval():
valPollInterval = Value()
if self.pollInterval is not None:
valPollInterval.setInt64(self.pollInterval)
else:
valPollInterval.setEmpty()
tagValueList.push(("poll-interval", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms"), valPollInterval)
if self.thresholdsObj:
valBegin = Value()
(tag, ns, prefix) = ("thresholds" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms", "qt-sys-alarms")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.thresholdsObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-thresholds-failed').errorFunc(): logFunc('thresholdsObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasMaxActiveConnections():
valMaxActiveConnections = Value()
if self.maxActiveConnections is not None:
valMaxActiveConnections.setInt64(self.maxActiveConnections)
else:
valMaxActiveConnections.setEmpty()
tagValueList.push(("max-active-connections", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valMaxActiveConnections)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valEnabled)
if self.hasMaxRedirectRate():
valMaxRedirectRate = Value()
if self.maxRedirectRate is not None:
valMaxRedirectRate.setInt64(self.maxRedirectRate)
else:
valMaxRedirectRate.setEmpty()
tagValueList.push(("max-redirect-rate", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valMaxRedirectRate)
if self.blockerObj:
valBegin = Value()
(tag, ns, prefix) = ("blocker" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line", "qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.blockerObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-blocker-failed').errorFunc(): logFunc('blockerObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isCountRequested() and operData.hasCount():
val = Value()
val.setInt64(operData.count)
tagValueList.push(("count", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-temperature"), val)
if operData.isTemperatureWarningRequested() and operData.hasTemperatureWarning():
val = Value()
val.setBool(operData.temperatureWarning)
tagValueList.push(("temperature-warning", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-temperature"), val)
if operData.isTemperatureCriticalRequested() and operData.hasTemperatureCritical():
val = Value()
val.setBool(operData.temperatureCritical)
tagValueList.push(("temperature-critical", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-temperature"), val)
if operData.isTemperatureCriticalReasonRequested() and operData.hasTemperatureCriticalReason():
val = Value()
val.setEnum(operData.temperatureCriticalReason.getValue())
tagValueList.push(("temperature-critical-reason", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-temperature"), val)
if operData.isTemperatureWarningReasonRequested() and operData.hasTemperatureWarningReason():
val = Value()
val.setEnum(operData.temperatureWarningReason.getValue())
tagValueList.push(("temperature-warning-reason", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-temperature"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isLocalTimeStringRequested() and operData.hasLocalTimeString():
val = Value()
val.setString(operData.localTimeString)
tagValueList.push(("local-time-string", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-clock"), val)
if operData.isUtcTimeStringRequested() and operData.hasUtcTimeString():
val = Value()
val.setString(operData.utcTimeString)
tagValueList.push(("utc-time-string", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-clock"), val)
if operData.isDaylightSavingTimeRequested() and operData.hasDaylightSavingTime():
val = Value()
val.setBool(operData.daylightSavingTime)
tagValueList.push(("daylight-saving-time", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-clock"), val)
if operData.isEpochRequested() and operData.hasEpoch():
val = Value()
val.setInt64(operData.epoch)
tagValueList.push(("epoch", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-clock"), val)
if operData.isUtcOffsetMinutesRequested() and operData.hasUtcOffsetMinutes():
val = Value()
val.setInt64(operData.utcOffsetMinutes)
tagValueList.push(("utc-offset-minutes", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-clock"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def getNext (self, trxContext, keypath, next):
for logFunc in self._log("get-next").debug3Func(): logFunc("called. keypath=%s, next=%s, trxContext=%s", keypath, next, trxContext)
var = 0
isCompleted = True
if self.myIsActive:
if self.myGetNextFunctor:
timeoutGuardName = str(self.myKeyPath) + "-" + "get-next-functor"
timeoutGuard = TimeoutGuard(self._log, timeoutGuardName,
self.getFunctorTimeout(self.GET_NEXT_FUNCTOR),
self.getFunctorMildTimeout(self.GET_NEXT_FUNCTOR))
var_PBR = PassByRef(var)
next_PBR = PassByRef(next)
isCompleted_PBR = PassByRef(None)
res = self.myGetNextFunctor(trxContext,
var_PBR,
next_PBR,
isCompleted_PBR)
timeoutGuard.checkAndLog("application problem: functor=%s" % self.myGetNextFunctor.__name__)
if res != ReturnCodes.kOk:
for logFunc in self._log("get-next-functor-failed").errorFunc(): logFunc(
"functor failed. res=%s, keypath=%s, trxContext=%s", res, keypath, trxContext)
return ReturnCodes.kGeneralError
var = var_PBR.value()
next = next_PBR.value()
isCompleted = isCompleted_PBR.value()
for logFunc in self._log("get-next-send-next-key-functor-returned").debug3Func(): logFunc(
"functor returned. keypath=%s, trxContext=%s, var=%s, next=%s, isCompeted=%s",
keypath, trxContext, var, next, isCompleted)
nextKeyValue = Value()
if isCompleted == True:
nextKeyValue.setEmpty()
else:
nextKeyValue.setInt64(var)
res = self.myDomain.sendNextKeyValue(trxContext, nextKeyValue, next)
if res != ReturnCodes.kOk:
for logFunc in self._log("get-next-send-next-key-value-failed").errorFunc(): logFunc(
"domain.sendNextKeyValue() failed. res=%s, keypath=%s, trxContext=%s, nextKeyValue=%s, next=%s",
res, keypath, trxContext, nextKeyValue, next)
return ReturnCodes.kGeneralError
return ReturnCodes.kOk;
def s_create (cls, logger,
configP,
domain):
__pychecker__="no-argsused"
logger('s-create-blinkyconfigp').info('called. domain=%s, _validationPointId=%s, _actionPointId=%s', domain, BlinkyConfigP._validationPointId, BlinkyConfigP._actionPointId)
confd_key=KeyPath()
ancestorVal = Value()
ancestorVal.setInt64(configP);
confd_key.addKeyPathPrefix(ancestorVal)
xmlVal = Value()
xmlVal.setXmlTag(("config-p", "http://qwilt.com/model/oper", "oper"))
confd_key.addKeyPathPrefix(xmlVal)
xmlVal = Value()
xmlVal.setXmlTag(("config-a", "http://qwilt.com/model/oper", "oper"))
confd_key.addKeyPathPrefix(xmlVal)
newNode=BlinkyConfigP(logger)
logger("s-create-keypath").info("confd_key=%s", confd_key)
newNode.setParent(None)
newNode.setKeyPath(confd_key)
newNode.setDomain(domain)
res = newNode.internalInit()
if (res != ReturnCodes.kOk):
logger("s-create-internal-init-failed")\
.error("internalInit() failed. confd_key=%s", confd_key)
if newNode._validationPointId:
res = domain.registerValidationPoint(newNode._validationPointId, newNode)
if (res != ReturnCodes.kOk):
logger("s-create-register-validation-node--failed")\
.error("registerValidationNode(%s) failed", newNode._validationPointId)
return None
newNode.validateRegistrationDone = True
if newNode._actionPointId:
res = domain.registerActionPoint(newNode._actionPointId, newNode)
if (res != ReturnCodes.kOk):
logger("s-create-register-action-node--failed")\
.error("registerActionNode(%s) failed", newNode._actionPointId)
return None
newNode.actionRegistrationDone = True
return newNode
def s_create(cls, logger, configP, domain):
__pychecker__ = "no-argsused"
logger('s-create-blinkyconfigp').info(
'called. domain=%s, _validationPointId=%s, _actionPointId=%s',
domain, BlinkyConfigP._validationPointId,
BlinkyConfigP._actionPointId)
confd_key = KeyPath()
ancestorVal = Value()
ancestorVal.setInt64(configP)
confd_key.addKeyPathPrefix(ancestorVal)
xmlVal = Value()
xmlVal.setXmlTag(("config-p", "http://qwilt.com/model/oper", "oper"))
confd_key.addKeyPathPrefix(xmlVal)
xmlVal = Value()
xmlVal.setXmlTag(("config-a", "http://qwilt.com/model/oper", "oper"))
confd_key.addKeyPathPrefix(xmlVal)
newNode = BlinkyConfigP(logger)
logger("s-create-keypath").info("confd_key=%s", confd_key)
newNode.setParent(None)
newNode.setKeyPath(confd_key)
newNode.setDomain(domain)
res = newNode.internalInit()
if (res != ReturnCodes.kOk):
logger("s-create-internal-init-failed")\
.error("internalInit() failed. confd_key=%s", confd_key)
if newNode._validationPointId:
res = domain.registerValidationPoint(newNode._validationPointId,
newNode)
if (res != ReturnCodes.kOk):
logger("s-create-register-validation-node--failed")\
.error("registerValidationNode(%s) failed", newNode._validationPointId)
return None
newNode.validateRegistrationDone = True
if newNode._actionPointId:
res = domain.registerActionPoint(newNode._actionPointId, newNode)
if (res != ReturnCodes.kOk):
logger("s-create-register-action-node--failed")\
.error("registerActionNode(%s) failed", newNode._actionPointId)
return None
newNode.actionRegistrationDone = True
return newNode
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasDummy():
valDummy = Value()
if self.dummy is not None:
valDummy.setInt64(self.dummy)
else:
valDummy.setEmpty()
tagValueList.push(("dummy", "http://qwilt.com/model/oper"),
valDummy)
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isNumOfCracksRequested() and operData.hasNumOfCracks():
val = Value()
val.setInt64(operData.numOfCracks)
tagValueList.push(("num-of-cracks", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/generator-test"), val)
if operData.isVersionRequested() and operData.hasVersion():
val = Value()
val.setString(operData.version)
tagValueList.push(("version", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/generator-test"), val)
if operData.isHealthRequested() and operData.hasHealth():
val = Value()
val.setString(operData.health)
tagValueList.push(("health", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/generator-test"), val)
if operData.isLinux_Requested() and operData.hasLinux_():
val = Value()
val.setString(operData.linux_)
tagValueList.push(("linux", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/generator-test"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isOsDeviceRequested() and operData.hasOsDevice():
val = Value()
val.setString(operData.osDevice)
tagValueList.push(("os-device", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if operData.isOprtationalStatusRequested() and operData.hasOprtationalStatus():
val = Value()
val.setEnum(operData.oprtationalStatus.getValue())
tagValueList.push(("oprtational-status", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if operData.isOperationalStatusReasonRequested() and operData.hasOperationalStatusReason():
val = Value()
val.setEnum(operData.operationalStatusReason.getValue())
tagValueList.push(("operational-status-reason", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if operData.isSizeRequested() and operData.hasSize():
val = Value()
val.setInt64(operData.size)
tagValueList.push(("size", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasTrimContentItemSizeMb():
valTrimContentItemSizeMb = Value()
if self.trimContentItemSizeMb is not None:
valTrimContentItemSizeMb.setInt64(self.trimContentItemSizeMb)
else:
valTrimContentItemSizeMb.setEmpty()
tagValueList.push(("trim-content-item-size-mb", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valTrimContentItemSizeMb)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push(("name", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valName)
if self.systemDefaultsObj:
valBegin = Value()
(tag, ns, prefix) = ("system-defaults" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line", "qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.systemDefaultsObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-system-defaults-failed').errorFunc(): logFunc('systemDefaultsObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasTrimContentItemSizeMb():
valTrimContentItemSizeMb = Value()
if self.trimContentItemSizeMb is not None:
valTrimContentItemSizeMb.setInt64(self.trimContentItemSizeMb)
else:
valTrimContentItemSizeMb.setEmpty()
tagValueList.push(("trim-content-item-size-mb", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valTrimContentItemSizeMb)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasVal():
valVal = Value()
if self.val is not None:
valVal.setInt64(self.val)
else:
valVal.setEmpty()
tagValueList.push(("val", "http://qwilt.com/model/lake-example"), valVal)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push(("name", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example"), valName)
if self.hasHeight():
valHeight = Value()
if self.height is not None:
valHeight.setInt64(self.height)
else:
valHeight.setEmpty()
tagValueList.push(("height", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example"), valHeight)
if self.statusWrapperObj:
valBegin = Value()
(tag, ns, prefix) = ("status-wrapper" , "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example", "oe")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusWrapperObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-status-wrapper-failed').errorFunc(): logFunc('statusWrapperObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasConfigDummy():
valConfigDummy = Value()
if self.configDummy is not None:
valConfigDummy.setInt64(self.configDummy)
else:
valConfigDummy.setEmpty()
tagValueList.push(("config-dummy", "http://qwilt.com/model/oper"), valConfigDummy)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasEyeNumber():
valEyeNumber = Value()
if self.eyeNumber is not None:
valEyeNumber.setInt64(self.eyeNumber)
else:
valEyeNumber.setEmpty()
tagValueList.push(("eye-number", "http://qwilt.com/model/family"),
valEyeNumber)
if self.hasTransparentField():
valTransparentField = Value()
if self.transparentField is not None:
valTransparentField.setBool(self.transparentField)
else:
valTransparentField.setEmpty()
tagValueList.push(
("transparent-field", "http://qwilt.com/model/family"),
valTransparentField)
if self.hasId():
valId = Value()
if self.id is not None:
valId.setString(self.id)
else:
valId.setEmpty()
tagValueList.push(("id", "http://qwilt.com/model/family"), valId)
if self.hasHasTail():
valHasTail = Value()
if self.hasTail is not None:
valHasTail.setBool(self.hasTail)
else:
valHasTail.setEmpty()
tagValueList.push(("has-tail", "http://qwilt.com/model/family"),
valHasTail)
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isVersionRequested() and operData.hasVersion():
val = Value()
val.setString(operData.version)
tagValueList.push(("version", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), val)
if operData.isHealthRequested() and operData.hasHealth():
val = Value()
val.setString(operData.health)
tagValueList.push(("health", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), val)
if operData.isNumOfCracksRequested() and operData.hasNumOfCracks():
val = Value()
val.setInt64(operData.numOfCracks)
tagValueList.push(("num-of-cracks", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasCommandWarningTimeout():
valCommandWarningTimeout = Value()
if self.commandWarningTimeout is not None:
valCommandWarningTimeout.setInt64(self.commandWarningTimeout)
else:
valCommandWarningTimeout.setEmpty()
tagValueList.push(("command-warning-timeout", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), valCommandWarningTimeout)
if self.hasCommandTimeout():
valCommandTimeout = Value()
if self.commandTimeout is not None:
valCommandTimeout.setInt64(self.commandTimeout)
else:
valCommandTimeout.setEmpty()
tagValueList.push(("command-timeout", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), valCommandTimeout)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), valEnabled)
if self.hasSimulationFile():
valSimulationFile = Value()
if self.simulationFile is not None:
valSimulationFile.setString(self.simulationFile)
else:
valSimulationFile.setEmpty()
tagValueList.push(("simulation-file", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), valSimulationFile)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasThreadPriority():
valThreadPriority = Value()
if self.threadPriority is not None:
valThreadPriority.setString(self.threadPriority)
else:
valThreadPriority.setEmpty()
tagValueList.push(("thread-priority", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valThreadPriority)
if self.hasSleepMsec():
valSleepMsec = Value()
if self.sleepMsec is not None:
valSleepMsec.setInt64(self.sleepMsec)
else:
valSleepMsec.setEmpty()
tagValueList.push(("sleep-msec", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valSleepMsec)
if self.hasCountersUpdateIntervalMsec():
valCountersUpdateIntervalMsec = Value()
if self.countersUpdateIntervalMsec is not None:
valCountersUpdateIntervalMsec.setInt64(self.countersUpdateIntervalMsec)
else:
valCountersUpdateIntervalMsec.setEmpty()
tagValueList.push(("counters-update-interval-msec", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valCountersUpdateIntervalMsec)
if self.hasThreadAffinity():
valThreadAffinity = Value()
if self.threadAffinity is not None:
valThreadAffinity.setString(self.threadAffinity)
else:
valThreadAffinity.setEmpty()
tagValueList.push(("thread-affinity", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valThreadAffinity)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasThreadPriority():
valThreadPriority = Value()
if self.threadPriority is not None:
valThreadPriority.setString(self.threadPriority)
else:
valThreadPriority.setEmpty()
tagValueList.push(("thread-priority", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valThreadPriority)
if self.hasSleepMsec():
valSleepMsec = Value()
if self.sleepMsec is not None:
valSleepMsec.setInt64(self.sleepMsec)
else:
valSleepMsec.setEmpty()
tagValueList.push(("sleep-msec", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valSleepMsec)
if self.hasCountersUpdateIntervalMsec():
valCountersUpdateIntervalMsec = Value()
if self.countersUpdateIntervalMsec is not None:
valCountersUpdateIntervalMsec.setInt64(self.countersUpdateIntervalMsec)
else:
valCountersUpdateIntervalMsec.setEmpty()
tagValueList.push(("counters-update-interval-msec", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valCountersUpdateIntervalMsec)
if self.hasThreadAffinity():
valThreadAffinity = Value()
if self.threadAffinity is not None:
valThreadAffinity.setString(self.threadAffinity)
else:
valThreadAffinity.setEmpty()
tagValueList.push(("thread-affinity", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valThreadAffinity)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasEyeNumber():
valEyeNumber = Value()
if self.eyeNumber is not None:
valEyeNumber.setInt64(self.eyeNumber)
else:
valEyeNumber.setEmpty()
tagValueList.push(("eye-number", "http://qwilt.com/model/family"), valEyeNumber)
if self.hasTransparentField():
valTransparentField = Value()
if self.transparentField is not None:
valTransparentField.setBool(self.transparentField)
else:
valTransparentField.setEmpty()
tagValueList.push(("transparent-field", "http://qwilt.com/model/family"), valTransparentField)
if self.hasId():
valId = Value()
if self.id is not None:
valId.setString(self.id)
else:
valId.setEmpty()
tagValueList.push(("id", "http://qwilt.com/model/family"), valId)
if self.hasHasTail():
valHasTail = Value()
if self.hasTail is not None:
valHasTail.setBool(self.hasTail)
else:
valHasTail.setEmpty()
tagValueList.push(("has-tail", "http://qwilt.com/model/family"), valHasTail)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasQueueThresholdLow():
valQueueThresholdLow = Value()
if self.queueThresholdLow is not None:
valQueueThresholdLow.setInt64(self.queueThresholdLow)
else:
valQueueThresholdLow.setEmpty()
tagValueList.push(("queue-threshold-low", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valQueueThresholdLow)
if self.hasQueueThresholdHigh():
valQueueThresholdHigh = Value()
if self.queueThresholdHigh is not None:
valQueueThresholdHigh.setInt64(self.queueThresholdHigh)
else:
valQueueThresholdHigh.setEmpty()
tagValueList.push(("queue-threshold-high", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valQueueThresholdHigh)
if self.hasQueueSize():
valQueueSize = Value()
if self.queueSize is not None:
valQueueSize.setInt64(self.queueSize)
else:
valQueueSize.setEmpty()
tagValueList.push(("queue-size", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valQueueSize)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasTestTimeoutMsec():
valTestTimeoutMsec = Value()
if self.testTimeoutMsec is not None:
valTestTimeoutMsec.setInt64(self.testTimeoutMsec)
else:
valTestTimeoutMsec.setEmpty()
tagValueList.push(
("test-timeout-msec",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces"),
valTestTimeoutMsec)
if self.hasTestIntervalMsec():
valTestIntervalMsec = Value()
if self.testIntervalMsec is not None:
valTestIntervalMsec.setInt64(self.testIntervalMsec)
else:
valTestIntervalMsec.setEmpty()
tagValueList.push(
("test-interval-msec",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces"),
valTestIntervalMsec)
if self.hasUpPeriod():
valUpPeriod = Value()
if self.upPeriod is not None:
valUpPeriod.setInt64(self.upPeriod)
else:
valUpPeriod.setEmpty()
tagValueList.push(
("up-period",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces"),
valUpPeriod)
if self.hasDownPeriod():
valDownPeriod = Value()
if self.downPeriod is not None:
valDownPeriod.setInt64(self.downPeriod)
else:
valDownPeriod.setEmpty()
tagValueList.push(
("down-period",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces"),
valDownPeriod)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasEmployed():
valEmployed = Value()
if self.employed is not None:
valEmployed.setBool(self.employed)
else:
valEmployed.setEmpty()
tagValueList.push((
"employed",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/list-example"
), valEmployed)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push((
"name",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/list-example"
), valName)
if self.hasHeight():
valHeight = Value()
if self.height is not None:
valHeight.setInt64(self.height)
else:
valHeight.setEmpty()
tagValueList.push((
"height",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/list-example"
), valHeight)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasEstimatedDeliveryTrxPerConnection():
valEstimatedDeliveryTrxPerConnection = Value()
if self.estimatedDeliveryTrxPerConnection is not None:
valEstimatedDeliveryTrxPerConnection.setInt64(self.estimatedDeliveryTrxPerConnection)
else:
valEstimatedDeliveryTrxPerConnection.setEmpty()
tagValueList.push(("estimated-delivery-trx-per-connection", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valEstimatedDeliveryTrxPerConnection)
if self.hasSimulatedDiskSizeGb():
valSimulatedDiskSizeGb = Value()
if self.simulatedDiskSizeGb is not None:
valSimulatedDiskSizeGb.setInt64(self.simulatedDiskSizeGb)
else:
valSimulatedDiskSizeGb.setEmpty()
tagValueList.push(("simulated-disk-size-gb", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valSimulatedDiskSizeGb)
if self.hasDeliveryMaxActiveConnections():
valDeliveryMaxActiveConnections = Value()
if self.deliveryMaxActiveConnections is not None:
valDeliveryMaxActiveConnections.setInt64(self.deliveryMaxActiveConnections)
else:
valDeliveryMaxActiveConnections.setEmpty()
tagValueList.push(("delivery-max-active-connections", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valDeliveryMaxActiveConnections)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valEnabled)
if self.hasDeliveryMaxBwMbps():
valDeliveryMaxBwMbps = Value()
if self.deliveryMaxBwMbps is not None:
valDeliveryMaxBwMbps.setInt64(self.deliveryMaxBwMbps)
else:
valDeliveryMaxBwMbps.setEmpty()
tagValueList.push(("delivery-max-bw-mbps", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valDeliveryMaxBwMbps)
return ReturnCodes.kOk
