def __init__(self, form, step, lines):
# Save the step
self.step = step
# Call super constructor
abaqusGui.AFXDataDialog.__init__(self, form, 'Error', self.CANCEL,
abaqusGui.DIALOG_ACTIONS_SEPARATOR)
# Configure the continue button
no_btn = self.getActionButton(self.ID_CLICKED_CANCEL)
no_btn.setText('OK')
# Display text
for line in lines:
abaqusGui.FXLabel(p=self, text=line)
def __init__(self, form, step, name, lines):
# Call super constructor
abaqusGui.AFXDataDialog.__init__(self, form, 'Confirm',
self.CONTINUE | self.CANCEL,
abaqusGui.DIALOG_ACTIONS_SEPARATOR)
# Save the step
self.step = step
# Configure the ok button
yes_btn = self.getActionButton(self.ID_CLICKED_CONTINUE)
yes_btn.setText('Yes')
# Configure the continue button
no_btn = self.getActionButton(self.ID_CLICKED_CANCEL)
no_btn.setText('No')
# Store data
self.name = name
# Display text
for line in lines:
abaqusGui.FXLabel(p=self, text=line)
def __init__(self, parent, form, keyword, text, geometry, quantity,
type_text, highlight_level):
# Create necessary parent widgets
self.frame = abaqusGui.FXHorizontalFrame(p=parent,
opts=0,
x=0,
y=0,
w=0,
h=0,
pl=0,
pr=0,
pt=0,
pb=0,
hs=abaqusGui.DEFAULT_SPACING,
vs=abaqusGui.DEFAULT_SPACING)
self.frame.setSelector(99)
self.label = abaqusGui.FXLabel(p=self.frame,
text=text + ' ' + ' (None)',
ic=None,
opts=abaqusGui.LAYOUT_CENTER_Y
| abaqusGui.JUSTIFY_LEFT)
self.handler = PickHandler(form, keyword, 'Pick ' + type_text + ' ',
geometry, quantity, self.label,
highlight_level)
# Call super constructor
abaqusGui.FXButton.__init__(
self,
p=self.frame,
text='\tPick ' + type_text + ' in Viewport',
ic=abaqusGui.afxGetIcon('select', abaqusGui.AFX_ICON_SMALL),
tgt=self.handler,
sel=abaqusGui.AFXMode.ID_ACTIVATE,
opts=abaqusGui.BUTTON_NORMAL | abaqusGui.LAYOUT_CENTER_Y,
x=0,
y=0,
w=0,
h=0,
pl=2,
pr=2,
pt=1,
pb=1)
def __init__(self, form, step):
# Call super constructor
abaqusGui.AFXDataDialog.__init__(self, form,
'New Periodic Boundary Condition',
self.CONTINUE | self.CANCEL,
abaqusGui.DIALOG_ACTIONS_SEPARATOR)
# Save the form
self.form = form
# Save the step
self.step = step
# Define command map
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_MODEL,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_PART,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_MASTER,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_SLAVE,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_EX_MASTER,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_USE_EX_MASTER,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_EX_SLAVE,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_USE_EX_SLAVE,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_PLANE,
InputDialog.on_message)
abaqusGui.FXMAPFUNC(self, abaqusGui.SEL_COMMAND, self.ID_SYM,
InputDialog.on_message)
# Configure the ok button
ok_btn = self.getActionButton(self.ID_CLICKED_CONTINUE)
ok_btn.disable()
ok_btn.setText('Create')
# Configure the continue button
close_btn = self.getActionButton(self.ID_CLICKED_CANCEL)
close_btn.setText('Close')
# Define the width of the input widgets
widget_width = 21
# Horizontal frame to tile widgets horizontally
frame_h = abaqusGui.FXHorizontalFrame(p=self)
# Left of frame: configuration
config = abaqusGui.FXGroupBox(p=frame_h, text='Configuration')
# Vertical aligner to align widgets vertically in the first column
aligner = abaqusGui.AFXVerticalAligner(p=config)
# Add combo box to select the model
mdls = mdb.models.keys()
self.cbx_model = abaqusGui.AFXComboBox(p=aligner,
ncols=widget_width,
nvis=len(mdls),
text='Select Model',
tgt=self,
sel=self.ID_MODEL)
index = 0
for mdl in mdls:
self.cbx_model.appendItem(text=mdl, sel=index)
index = index + 1
# Add combo box to select the part
self.cbx_part = abaqusGui.AFXComboBox(p=aligner,
ncols=widget_width,
nvis=0,
text='Select Part',
tgt=self,
sel=self.ID_PART)
self.cbx_part.disable()
# Add combo boxes to select the master surface, but set it as disabled by default
self.cbx_master = abaqusGui.AFXComboBox(p=aligner,
ncols=widget_width,
nvis=0,
text='Master Surface',
tgt=self,
sel=self.ID_MASTER)
self.cbx_master.disable()
# Add combo boxes to select the slave surface, but set it as disabled by default
self.cbx_slave = abaqusGui.AFXComboBox(p=aligner,
ncols=widget_width,
nvis=0,
text='Slave Surface',
tgt=self,
sel=self.ID_SLAVE)
self.cbx_slave.disable()
# Add a check box to enable the definition of exempts for the master surface, and a selection combo box
frame_em = abaqusGui.FXHorizontalFrame(p=aligner,
opts=0,
x=0,
y=0,
w=0,
h=0,
pl=0,
pr=0,
pt=0,
pb=0,
hs=abaqusGui.DEFAULT_SPACING,
vs=abaqusGui.DEFAULT_SPACING)
abaqusGui.FXLabel(p=frame_em,
text='Master Exempt',
ic=None,
opts=abaqusGui.LAYOUT_CENTER_Y
| abaqusGui.JUSTIFY_LEFT)
frame_em_sub = abaqusGui.FXHorizontalFrame(
p=frame_em,
opts=0,
x=0,
y=0,
w=0,
h=0,
pl=0,
pr=0,
pt=0,
pb=0,
hs=abaqusGui.DEFAULT_SPACING,
vs=abaqusGui.DEFAULT_SPACING)
self.check_ex_master = abaqusGui.FXCheckButton(
p=frame_em_sub, text='', tgt=self, sel=self.ID_USE_EX_MASTER)
self.cbx_ex_master = abaqusGui.AFXComboBox(p=frame_em_sub,
ncols=widget_width - 4,
nvis=0,
text='',
tgt=self,
sel=self.ID_EX_MASTER)
self.check_ex_master.disable()
self.cbx_ex_master.disable()
# Add a check box to enable the definition of exempts for the master surface, and a selection combo box
frame_es = abaqusGui.FXHorizontalFrame(p=aligner,
opts=0,
x=0,
y=0,
w=0,
h=0,
pl=0,
pr=0,
pt=0,
pb=0,
hs=abaqusGui.DEFAULT_SPACING,
vs=abaqusGui.DEFAULT_SPACING)
abaqusGui.FXLabel(p=frame_es,
text='Slave Exempt',
ic=None,
opts=abaqusGui.LAYOUT_CENTER_Y
| abaqusGui.JUSTIFY_LEFT)
frame_es_sub = abaqusGui.FXHorizontalFrame(
p=frame_es,
opts=0,
x=0,
y=0,
w=0,
h=0,
pl=0,
pr=0,
pt=0,
pb=0,
hs=abaqusGui.DEFAULT_SPACING,
vs=abaqusGui.DEFAULT_SPACING)
self.check_ex_slave = abaqusGui.FXCheckButton(p=frame_es_sub,
text='',
tgt=self,
sel=self.ID_USE_EX_SLAVE)
self.cbx_ex_slave = abaqusGui.AFXComboBox(p=frame_es_sub,
ncols=widget_width - 4,
nvis=0,
text='',
tgt=self,
sel=self.ID_EX_SLAVE)
self.check_ex_slave.disable()
self.cbx_ex_slave.disable()
# Add text field for the name
self.txt_name = abaqusGui.AFXTextField(p=aligner,
ncols=widget_width + 2,
labelText='PBC Name',
tgt=self,
sel=self.ID_NAME)
# Add combo box to select the plane
self.cbx_plane = abaqusGui.AFXComboBox(p=aligner,
ncols=widget_width,
nvis=3,
text='Match Plane',
tgt=self,
sel=self.ID_PLANE)
self.cbx_plane.appendItem(text=PLANES[0], sel=0)
self.cbx_plane.appendItem(text=PLANES[1], sel=1)
self.cbx_plane.appendItem(text=PLANES[2], sel=2)
# Add combo box to select the symmetry
self.cbx_sym = abaqusGui.AFXComboBox(p=aligner,
ncols=widget_width,
nvis=3,
text='Symmetry',
tgt=self,
sel=self.ID_SYM)
self.cbx_sym.appendItem(text=SYMMETRY[0], sel=0)
self.cbx_sym.appendItem(text=SYMMETRY[1], sel=1)
self.cbx_sym.appendItem(text=SYMMETRY[2], sel=2)
# Set currently selected items to -1 (to force an update on first opening of the GUI)
self.currentModel = -1
self.currentPart = -1
self.currentMaster = -1
self.currentSlave = -1
self.currentMExempt = -1
self.currentSExempt = -1
self.currentName = ''
self.currentPlane = -1
self.currentSym = -1
# Define highlighted sets
self.highlight_m = ''
self.highlight_s = ''
self.highlight_em = ''
self.highlight_es = ''
# Force initial updates
self.on_model_selected()
self.on_plane_selected()
self.on_sym_selected()