def __init__(self, spi=None, cs=None, dc=None, i2c=None):
displayio.release_displays()
if spi is None:
spi = board.SPI()
if cs is None:
cs = board.D9
if dc is None:
dc = board.D10
if i2c is None:
i2c = board.I2C()
ts_cs = digitalio.DigitalInOut(board.D6)
self.touchscreen = Adafruit_STMPE610_SPI(spi, ts_cs)
display_bus = displayio.FourWire(spi, command=dc, chip_select=cs)
self.display = adafruit_ili9341.ILI9341(display_bus, width=320, height=240)
self.neopixel = neopixel.NeoPixel(board.D11, 1)
self.keyboard = BBQ10Keyboard(i2c)
sd_cs = board.D5
self._sdcard = None
try:
self._sdcard = sdcardio.SDCard(spi, sd_cs)
vfs = storage.VfsFat(self._sdcard)
storage.mount(vfs, "/sd")
except OSError as error:
print("No SD card found:", error)
def __init__(
self,
spi: Optional[SPI] = None,
cs: Optional[Pin] = None,
dc: Optional[Pin] = None,
ts_cs: Optional[Pin] = None,
sd_cs: Optional[Pin] = None,
):
super().__init__(spi, cs, dc, ts_cs, sd_cs)
self.display = adafruit_ili9341.ILI9341(self._display_bus,
width=320,
height=240)
def __init__(
self,
spi=None,
cs=None,
dc=None,
i2c=None,
ts_cs=None,
sd_cs=None,
neopixel_pin=None,
):
super().__init__(spi, cs, dc, ts_cs, sd_cs)
if i2c is None:
i2c = board.I2C()
if neopixel_pin is None:
neopixel_pin = board.D11
self.display = adafruit_ili9341.ILI9341(self._display_bus,
width=320,
height=240)
self.neopixel = neopixel.NeoPixel(neopixel_pin, 1)
self.keyboard = BBQ10Keyboard(i2c)
def __init__(self,
*,
default_bg=None,
display=None,
spi=None,
debug=False):
if display is None:
if DISPLAY_ARG_REQUIRED:
raise RuntimeError(
"Display must be provided on platforms without board.")
display_bus = displayio.FourWire(spi,
command=board.D25,
chip_select=board.CE0)
display = adafruit_ili9341.ILI9341(display_bus,
width=320,
height=240,
backlight_pin=board.D18)
if display is None:
raise RuntimeError("Display not found or provided")
super().__init__(display, default_bg=default_bg, debug=debug)
# Tracks whether we've hidden the background when we showed the QR code.
self._qr_only = False
import board, digitalio, displayio import storage, os import neopixel import adafruit_sdcard import adafruit_ili9341 from bbq10keyboard import BBQ10Keyboard spi = board.SPI() i2c = board.I2C() # setup display displayio.release_displays() tft_cs = board.D9 tft_dc = board.D10 display_bus = displayio.FourWire(spi, command=tft_dc, chip_select=tft_cs) display = adafruit_ili9341.ILI9341(display_bus, width=320, height=240) # setup keyboard kbd = BBQ10Keyboard(i2c) # setup microSD sd_cs = board.D5 sdcard = adafruit_sdcard.SDCard(spi, digitalio.DigitalInOut(sd_cs)) vfs = storage.VfsFat(sdcard) storage.mount(vfs, '/sd') # setup NeoPixels pix0 = neopixel.NeoPixel(board.NEOPIXEL, 1) pix0[0] = 0x000080 pix1 = neopixel.NeoPixel(board.D11, 1)
tft_dc = board.IO3
touch_cs = board.IO38
neo_pin = board.IO7
# --- driver objects ---
# turn the pixel on as a reminder if the trace is not cut
pixel = neopixel.NeoPixel(neo_pin, 1, auto_write=True)
pixel[0] = 0xEF0000
# setup the display
displayio.release_displays()
display_bus = displayio.FourWire(spi, command=tft_dc, chip_select=tft_cs)
display = adafruit_ili9341.ILI9341(
display_bus,
width=_WIDTH,
height=_HEIGHT,
rotation=_ROTATION,
)
# resistive touchscreen
touch = Adafruit_STMPE610_SPI(
spi,
digitalio.DigitalInOut(touch_cs),
)
# --- driver interface ---
_XRANGE = abs(_LX - _RX)
_YRAGNE = abs(_TY - _BY)
# SD card
sd_cs = digitalio.DigitalInOut(board.D5)
sdcard = adafruit_sdcard.SDCard(spi, sd_cs)
vfs = storage.VfsFat(sdcard)
storage.mount(vfs, "/sd")
# Display
# Release any resources currently in use for the displays
displayio.release_displays()
# TFT settings
tft_cs = board.D9
tft_dc = board.D10
display_bus = displayio.FourWire(spi, command=tft_dc, chip_select=tft_cs)
display = adafruit_ili9341.ILI9341(display_bus,
width=240,
height=320,
rotation=90)
# Touch
st_cs_pin = digitalio.DigitalInOut(board.D6)
st = adafruit_stmpe610.Adafruit_STMPE610_SPI(spi, st_cs_pin)
# For registering just one touch
touched = 0
# Groups under main display group
tab_number_group = displayio.Group(x=0, y=0)
row1_group = displayio.Group(x=0, y=0)
row2_group = displayio.Group(x=0, y=108)
row3_group = displayio.Group(x=0, y=214)
lines_group = displayio.Group(x=0, y=0)
pen_switch = digitalio.DigitalInOut(PEN_SWITCH)
pen_switch.switch_to_input(pull=digitalio.Pull.UP)
# set up display
displayio.release_displays()
spi = board.SPI()
tft_cs = board.D9
tft_dc = board.D10
tft_rst = board.D6
display_bus = displayio.FourWire(spi,
command=tft_dc,
chip_select=tft_cs,
reset=tft_rst)
display = adafruit_ili9341.ILI9341(display_bus,
width=DISPLAY_WIDTH,
height=DISPLAY_HEIGHT)
# add base UI element
splash = displayio.Group(scale=SKETCH_SCALE)
display.show(splash)
# add sketch
sketch_bitmap = displayio.Bitmap(SKETCH_WIDTH, SKETCH_HEIGHT, 2)
sketch_palette = displayio.Palette(2)
sketch_palette[0] = BACKGROUND_COLOR
sketch_palette[1] = DRAW_COLOR
sketch = displayio.TileGrid(sketch_bitmap,
pixel_shader=sketch_palette,
x=0,
y=0)
# Tell displayio to clean up after any previous usage
displayio.release_displays()
# Define ILI9341 screen as an SPI-interfaced display
tft_cs = board.GP17
tft_dc = board.GP21
tft_res = board.GP20
spi_mosi = board.GP19
spi_clk = board.GP18
spi_miso = board.GP16
spi = busio.SPI(clock=spi_clk, MOSI=spi_mosi, MISO=spi_miso)
display_bus = displayio.FourWire(spi, command=tft_dc, chip_select=tft_cs)
display = adafruit_ili9341.ILI9341(display_bus, width=WIDTH, height=HEIGHT)
# Initially, just show a bright green background to prove the display is working
splash = displayio.Group(max_size=10)
display.show(splash)
color_bitmap = displayio.Bitmap(320, 240, 1)
color_palette = displayio.Palette(1)
color_palette[0] = 0x00FF00 # Bright Green
bg_sprite = displayio.TileGrid(color_bitmap,
pixel_shader=color_palette,
x=0,
y=0)
splash.append(bg_sprite)
def __init__(self, spi_clock, spi_mosi, spi_miso, i2c_scl, i2c_sda,
dsp_command, dsp_chip_select, dsp_reset, i2s_clock, i2s_word,
i2s_data, uart_tx, uart_rx):
# Turn on the Pico's on-board LED
print("Setting up power blinky")
self.setupPowerBlinky()
time.sleep(1)
print("Done power blinky")
try:
# Create your bus objects
self.spi = busio.SPI(clock=spi_clock, MOSI=spi_mosi, MISO=spi_miso)
self.display_bus = displayio.FourWire(self.spi,
command=dsp_command,
chip_select=dsp_chip_select,
reset=dsp_reset)
self.main_screen = adafruit_ili9341.ILI9341(self.display_bus,
width=self.WIDTH,
height=self.HEIGHT)
self.i2c = busio.I2C(scl=i2c_scl, sda=i2c_sda)
self.uart = busio.UART(tx=uart_tx,
rx=uart_rx,
baudrate=9600,
timeout=10)
if sounds_enabled:
self.i2s = audiobusio.I2SOut(bit_clock=i2s_clock,
word_select=i2s_word,
data=i2s_data)
self.colours = Colours()
# Create objects for display
self.setupBlinkies()
self.setupButtons()
if touch_screen_enabled:
try:
self.touch_screen = adafruit_stmpe610.Adafruit_STMPE610_I2C(
self.i2c, address=0x41)
except Exception as err:
self.led.value = False
print("No touch screen could be enabled")
self.okuda_font = bitmap_font.load_font("fonts/okuda.pcf")
#self.okuda_font = bitmap_font.load_font("fonts/font5x8.bin")
#self.okuda_font.load_glyphs(b'ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789 %.')
# Define sensor devices
self.thermal_camera = ThermalCamera(width=self.WIDTH,
height=self.HEIGHT,
i2c=self.i2c,
display_bus=self.display_bus,
display=self.main_screen,
reverse=False,
font=self.okuda_font)
self.bme680 = adafruit_bme680.Adafruit_BME680_I2C(self.i2c,
address=0x77)
self.bme680.seaLevelhPa = self.SEA_LEVEL_NORMAL
self.veml = adafruit_veml6075.VEML6075(self.i2c,
integration_time=100)
self.gps = adafruit_gps.GPS(self.uart, debug=False)
self.matrix = Matrix(i2c=self.i2c)
self.loadSounds()
self.setupGPS()
self.setupLCARS()
except Exception as err:
print("Error in PicoPicorder.init()")
self.blinkError(err)
time.sleep(2)
def __init__(self, spi=None, cs=None, dc=None, ts_cs=None, sd_cs=None):
super().__init__(spi, cs, dc, ts_cs, sd_cs)
self.display = adafruit_ili9341.ILI9341(self._display_bus,
width=320,
height=240)
def __init__(
self,
*,
url=None,
headers=None,
json_path=None,
regexp_path=None,
default_bg=0x000000,
status_neopixel=None,
text_font=None,
text_position=None,
text_color=0x808080,
text_wrap=False,
text_maxlen=0,
text_transform=None,
json_transform=None,
image_json_path=None,
image_resize=None,
image_position=None,
image_dim_json_path=None,
caption_text=None,
caption_font=None,
caption_position=None,
caption_color=0x808080,
image_url_path=None,
success_callback=None,
external_spi=None,
debug=False,
display=None,
touchscreen=None
):
self._debug = debug
self._debug_start = time.monotonic()
self.display = display
spi = None
if self.display is None:
if external_spi: # If SPI Object Passed
spi = external_spi
else: # Else: Make ESP32 connection
spi = board.SPI()
display_bus = displayio.FourWire(
spi, command=board.D25, chip_select=board.CE0
)
self.display = adafruit_ili9341.ILI9341(
display_bus, width=320, height=240, backlight_pin=board.D18
)
if self.display is None:
raise RuntimeError("Display not found or provided")
self.set_backlight(1.0) # turn on backlight
self._url = url
self._headers = headers
if json_path:
if isinstance(json_path[0], (list, tuple)):
self._json_path = json_path
else:
self._json_path = (json_path,)
else:
self._json_path = None
self._regexp_path = regexp_path
self._success_callback = success_callback
if status_neopixel:
import neopixel # pylint: disable=import-outside-toplevel
self.neopix = neopixel.NeoPixel(status_neopixel, 1, brightness=0.2)
else:
self.neopix = None
self.neo_status(0)
self.audio_device = 1
try:
os.stat(LOCALFILE)
self._uselocal = True
except OSError:
self._uselocal = False
self._debug_print("Init display")
self.splash = displayio.Group(max_size=15)
self._debug_print("Init background")
self._bg_group = displayio.Group(max_size=1)
self._bg_file = None
self._default_bg = default_bg
self.splash.append(self._bg_group)
# show thank you and bootup file if available
for bootscreen in ("thankyou.bmp", "pyportal_startup.bmp"):
try:
os.stat(bootscreen)
self.display.show(self.splash)
self.set_backlight(0)
self.set_background(bootscreen)
self.set_backlight(1)
except OSError:
pass # they removed it, skip!
try:
self.play_file("pyportal_startup.wav")
except OSError:
pass # they deleted the file, no biggie!
self._debug_print("My IP address is", self.get_ip_address())
# set the default background
self.set_background(self._default_bg)
self.display.show(self.splash)
self._qr_group = None
# Tracks whether we've hidden the background when we showed the QR code.
self._qr_only = False
self._debug_print("Init caption")
self._caption = None
if caption_font:
self._caption_font = bitmap_font.load_font(caption_font)
self.set_caption(caption_text, caption_position, caption_color)
if text_font:
if isinstance(text_position[0], (list, tuple)):
num = len(text_position)
if not text_wrap:
text_wrap = [0] * num
if not text_maxlen:
text_maxlen = [0] * num
if not text_transform:
text_transform = [None] * num
else:
num = 1
text_position = (text_position,)
text_color = (text_color,)
text_wrap = (text_wrap,)
text_maxlen = (text_maxlen,)
text_transform = (text_transform,)
self._text = [None] * num
self._text_color = [None] * num
self._text_position = [None] * num
self._text_wrap = [None] * num
self._text_maxlen = [None] * num
self._text_transform = [None] * num
self._text_font = bitmap_font.load_font(text_font)
self._debug_print("Loading font glyphs")
# self._text_font.load_glyphs(b'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz'
# b'0123456789:/-_,. ')
gc.collect()
for i in range(num):
self._debug_print("Init text area", i)
self._text[i] = None
self._text_color[i] = text_color[i]
self._text_position[i] = text_position[i]
self._text_wrap[i] = text_wrap[i]
self._text_maxlen[i] = text_maxlen[i]
self._text_transform[i] = text_transform[i]
else:
self._text_font = None
self._text = None
# Add any JSON translators
self._json_transform = []
if json_transform:
if callable(json_transform):
self._json_transform.append(json_transform)
else:
self._json_transform.extend(filter(callable, json_transform))
self._image_json_path = image_json_path
self._image_url_path = image_url_path
self._image_resize = image_resize
self._image_position = image_position
self._image_dim_json_path = image_dim_json_path
if image_json_path or image_url_path:
self._debug_print("Init image path")
if not self._image_position:
self._image_position = (0, 0) # default to top corner
if not self._image_resize:
self._image_resize = (
self.display.width,
self.display.height,
) # default to full screen
self._debug_print("Init touchscreen")
self.touchscreen = touchscreen
if spi is not None:
# Attempt to Init STMPE610
if self.touchscreen is None:
self._debug_print("Attempting to initialize STMPE610...")
try:
chip_select = digitalio.DigitalInOut(board.CE1)
self.touchscreen = Adafruit_STMPE610_SPI(spi, chip_select)
except (RuntimeError, AttributeError):
self._debug_print("None Found")
# Attempt to Init FocalTouch
if self.touchscreen is None:
self._debug_print("Attempting to initialize Focal Touch...")
try:
i2c = board.I2C()
self.touchscreen = adafruit_focaltouch.Adafruit_FocalTouch(i2c)
except Exception: # pylint: disable=broad-except
self._debug_print("None Found")
self.set_backlight(1.0) # turn on backlight
gc.collect()
