def __init__(self, i2c_bus):
super().__init__()
self.led_matrix = [[BLANK for x in range(W)] for y in range(H)]
self.old_led_matrix = [[BLANK for x in range(W)] for y in range(H)]
self.trelli = [[] for i in range(int(H/4))] # [[],[]]
print("Creating Trelli")
for x, slice in enumerate(trellis_addresses):
for y, addr in enumerate(slice):
t = NeoTrellis(i2c_bus, False, addr=addr)
t.pixels.auto_write = False
self.trelli[x].append(t)
sleep(0.1)
pass
print("Linking Trelli")
self.trellis = MultiTrellis(self.trelli)
print("Trelli linked")
button_cb = self.make_button_cb()
print("Initializing Trelli inputs")
for y in range(H):
for x in range(W):
pass
sleep(0.01)
self.trellis.activate_key(x, y, NeoTrellis.EDGE_RISING)
sleep(0.01)
self.trellis.activate_key(x, y, NeoTrellis.EDGE_FALLING)
self.trellis.set_callback(x, y, button_cb)
debug("Inputs initialized")
self.blank_screen()
class Trellis(object):
def __init__(self):
# setup trellis
i2c_bus = busio.I2C(SCL, SDA)
self.trellis = MultiTrellis(
[
[
NeoTrellis(i2c_bus, True, addr=0x31),
NeoTrellis(i2c_bus, True, addr=0x30),
NeoTrellis(i2c_bus, True, addr=0x2F),
NeoTrellis(i2c_bus, True, addr=0x2E),
],
[
NeoTrellis(i2c_bus, True, addr=0x35),
NeoTrellis(i2c_bus, True, addr=0x34),
NeoTrellis(i2c_bus, True, addr=0x33),
NeoTrellis(i2c_bus, True, addr=0x32),
],
]
)
# interrupt pin - sync only when needed
self.interrupt = digitalio.DigitalInOut(D5)
self.interrupt.direction = digitalio.Direction.INPUT
def update(self):
if self.interrupt.value is False:
self.trellis.sync()
def __init__(self, button_bus, led_bus, i2c_bus):
Thread.__init__(self, name='Display')
# super(Display, self).__init__()
self.button_bus = button_bus
self.led_bus = led_bus
debug("Creating i2c bus")
lcd.flash("Creating i2c bus")
# i2c_bus = busio.I2C(SCL, SDA)
lcd.setup_hw(i2c_bus)
debug("i2c bus created")
lcd.flash("i2c bus created")
debug("Creating Trelli")
lcd.flash("Creating Trelli")
trelli = [[], [], [], []]
# addrs = trellis_addresses
# Create trelli sequentially with a slight pause between each
for x, slice in enumerate(trellis_addresses):
for y, addr in enumerate(slice):
t = NeoTrellis(i2c_bus, False, addr=addr)
t.pixels.auto_write = False
trelli[x].append(t)
sleep(0.1)
debug("Linking Trelli")
lcd.flash("Linking Trelli")
self.trellis = MultiTrellis(trelli)
debug("Trelli linked")
lcd.flash("Trelli linked")
self.grid_h = H
self.grid_w = W
self.state = 'play'
self.led_matrix = [[(0, 0, 0) for x in range(w)] for y in range(h)]
self.old_led_matrix = [[(0, 0, 0) for x in range(w)] for y in range(h)]
button_cb = self.make_cb()
debug("Initializing Trelli inputs")
lcd.flash("Initializing Trelli inputs")
for y in range(self.grid_h):
for x in range(self.grid_w):
sleep(0.01)
self.trellis.activate_key(x, y, NeoTrellis.EDGE_RISING)
sleep(0.01)
self.trellis.activate_key(x, y, NeoTrellis.EDGE_FALLING)
self.trellis.set_callback(x, y, button_cb)
self.ins_button = digitalio.DigitalInOut(D13)
self.gbl_button = digitalio.DigitalInOut(D6)
debug("Inputs initialized")
lcd.flash("Inputs initialized")
self.col_scheme = select_scheme('default')
return
def __init__(self):
GPIO.setmode(GPIO.BCM)
GPIO.setup(clk, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(dt, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
self.counter = 0
self.clkLastState = GPIO.input(clk)
i2c_bus = busio.I2C(SCL, SDA)
trelli = [
[
NeoTrellis(i2c_bus, False, addr=0x2E),
NeoTrellis(i2c_bus, False, addr=0x2F),
NeoTrellis(i2c_bus, False, addr=0x30)
],
]
trellis = MultiTrellis(trelli)
uart = UARTService()
advertisement = ProvideServicesAdvertisement(uart)
i2c = board.I2C()
trelli = [
[
NeoTrellis(i2c, False, addr=0x2F),
NeoTrellis(i2c, False, addr=0x2E),
],
[
NeoTrellis(i2c, False, addr=0x31),
NeoTrellis(i2c, False, addr=0x30),
],
]
trellis = MultiTrellis(trelli)
class TrellisWrapper(object):
"""Wrapper that implements the basic color iface, for use with Toy"""
def __init__(self, trellis, brightness=1):
self.brightness = brightness
self.trellis = trellis
def _adjustColor(self, color):
return (int(c * self.brightness) for c in color)
def color(self, x, y, color):
self.trellis.color(x, y, self._adjustColor(color))
def width(self):
trelli = [
[NeoTrellis(i2c_bus, False, addr=0x2E), NeoTrellis(i2c_bus, False, addr=0x2F)]
]
"""
trelli = [[
NeoTrellis(i2c_bus, False, addr=0x2E),
NeoTrellis(i2c_bus, False, addr=0x2F)
],
[
NeoTrellis(i2c_bus, False, addr=0x30),
NeoTrellis(i2c_bus, False, addr=0x31)
]]
trellis = MultiTrellis(trelli)
#some color definitions
OFF = (0, 0, 0)
RED = (255, 0, 0)
YELLOW = (255, 150, 0)
GREEN = (0, 255, 0)
CYAN = (0, 255, 255)
BLUE = (0, 0, 255)
PURPLE = (180, 0, 255)
#this will be called when button events are received
def blink(xcoord, ycoord, edge):
#turn the LED on when a rising edge is detected
if edge == NeoTrellis.EDGE_RISING:
"""
trelli = [
[NeoTrellis(i2c_bus, False, addr=0x2E), NeoTrellis(i2c_bus, False, addr=0x2F)],
[NeoTrellis(i2c_bus, False, addr=0x30), NeoTrellis(i2c_bus, False, addr=0x31)],
]
tempo = 60 # Starting BPM
# You can use the accelerometer to speed/slow down tempo by tilting!
ENABLE_TILT_TEMPO = True
MIN_TEMPO = 100
MAX_TEMPO = 300
BUTTONS = BUTTONS8x8
trellis = MultiTrellis(trelli)
# pressed_keys - A list of tuples of currently pressed button coordinates
trellis.pressed_keys = set()
# currently pressed sequencer buttons
current_press = set()
# Our global state
current_step = 7 # we actually start on the last step since we increment first
# the state of the sequencer
beatset = [[False] * 8,
[False] * 8,
[False] * 8,
[False] * 8,
[False] * 8,
# create the trellis
trelli = [[], [], [], []]
addrs = [[0x31, 0x30, 0x2f, 0x2e], [0x35, 0x34, 0x33, 0x32],
[0x36, 0x37, 0x38, 0x39], [0x3a, 0x3c, 0x3b, 0x3d]]
# Create trelli sequentially with a slight pause between each
for x, slice in enumerate(addrs):
for y, addr in enumerate(slice):
t = NeoTrellis(i2c_bus, False, addr=addr)
t.pixels.auto_write = False
trelli[x].append(t)
sleep(0.2)
sizeY = len(trelli) * 4
sizeX = len(trelli[0]) * 4
trellis = MultiTrellis(trelli)
for ts in trelli:
for t in ts:
print(t)
print(type(t))
t.pixels.auto_write = False
print('ready')
wait = 0.05
OFF = (0, 0, 0)
LOW = (5, 5, 5)
RED = (255, 0, 0)
YELLOW = (255, 150, 0)
GREEN = (0, 255, 0)
CYAN = (0, 255, 255)
# -------------------------
# SETUP
# -------------------------
# create the i2c object for the trellis
i2c_bus = busio.I2C(SCL, SDA)
trelli = [
[NeoTrellis(i2c_bus, False, addr=0x2E),
NeoTrellis(i2c_bus, False, addr=0x30)],
[NeoTrellis(i2c_bus, False, addr=0x31),
NeoTrellis(i2c_bus, False, addr=0x2F)]
]
trellis = MultiTrellis(trelli)
UPPER_LEFT = 40
# some color definitions
OFF = (0, 0, 0)
V = 100 # default velocity (color "volume")
# Tell the device to act like a keyboard.
keyboard = Keyboard(usb_hid.devices)
# Send a keypress of ESCAPE
keyboard.send(Keycode.ESCAPE)
# Send CTRL-A (select all in most text editors)
keyboard.send(Keycode.CONTROL, Keycode.A)
class Display(Thread):
"""docstring for Display."""
def __init__(self, button_bus, led_bus, i2c_bus):
Thread.__init__(self, name='Display')
# super(Display, self).__init__()
self.button_bus = button_bus
self.led_bus = led_bus
debug("Creating i2c bus")
lcd.flash("Creating i2c bus")
# i2c_bus = busio.I2C(SCL, SDA)
lcd.setup_hw(i2c_bus)
debug("i2c bus created")
lcd.flash("i2c bus created")
debug("Creating Trelli")
lcd.flash("Creating Trelli")
trelli = [[], [], [], []]
# addrs = trellis_addresses
# Create trelli sequentially with a slight pause between each
for x, slice in enumerate(trellis_addresses):
for y, addr in enumerate(slice):
t = NeoTrellis(i2c_bus, False, addr=addr)
t.pixels.auto_write = False
trelli[x].append(t)
sleep(0.1)
debug("Linking Trelli")
lcd.flash("Linking Trelli")
self.trellis = MultiTrellis(trelli)
debug("Trelli linked")
lcd.flash("Trelli linked")
self.grid_h = H
self.grid_w = W
self.state = 'play'
self.led_matrix = [[(0, 0, 0) for x in range(w)] for y in range(h)]
self.old_led_matrix = [[(0, 0, 0) for x in range(w)] for y in range(h)]
button_cb = self.make_cb()
debug("Initializing Trelli inputs")
lcd.flash("Initializing Trelli inputs")
for y in range(self.grid_h):
for x in range(self.grid_w):
sleep(0.01)
self.trellis.activate_key(x, y, NeoTrellis.EDGE_RISING)
sleep(0.01)
self.trellis.activate_key(x, y, NeoTrellis.EDGE_FALLING)
self.trellis.set_callback(x, y, button_cb)
self.ins_button = digitalio.DigitalInOut(D13)
self.gbl_button = digitalio.DigitalInOut(D6)
debug("Inputs initialized")
lcd.flash("Inputs initialized")
self.col_scheme = select_scheme('default')
return
def run(self):
debug("Display thread started")
while True:
sleep(0.01)
m = self.get_cmds()
if m.get('cmd') != None:
debug(m)
self.button_bus.put(m)
if not self.led_bus.empty():
status, led_grid = self.led_bus.get()
self.draw_all(status, led_grid)
return
def read_gbl_button(self):
return not self.gbl_button.value
def read_ins_button(self):
return not self.ins_button.value
def get_cmds(self):
try:
self.trellis.sync() # TODO undo? Fails if called too often
except Exception as e:
debug("HW error: {}".format(str(e)))
m = {'cmd': None}
if self.read_gbl_button():
if self.state != 'gbl_cfg':
m['cmd'] = "CONFIG_A"
self.state = 'gbl_cfg'
else:
self.state = 'play'
elif self.read_ins_button():
if self.state != 'ins_cfg':
m['cmd'] = "CONFIG_B"
self.state = 'ins_cfg'
else:
self.state = 'play'
return m
def draw_all(self, status, led_grid):
self.draw_note_grid(led_grid)
self.redraw_diff()
return
def blank_screen(self):
for x in range(len(self.led_matrix)):
for y in range(len(self.led_matrix[x])):
self.led_matrix[x][y] = OFF
def redraw_diff(self):
diffs = []
for x in range(len(self.led_matrix)):
for y in range(len(self.led_matrix[x])):
if self.led_matrix[x][y] != self.old_led_matrix[x][y]:
diffs.append((x, y, self.led_matrix[x][y]))
self.old_led_matrix[x][y] = self.led_matrix[x][y]
for diff in diffs:
self.trellis.color(diff[0], diff[1], diff[2])
sleep(0.001)
if len(diffs) > 0:
if not AUTO_WRITE:
for ts in self.trellis._trelli:
for t in ts:
t.pixels.show()
return
def draw_note_grid(self, led_grid):
for x in range(len(led_grid)):
for y in range(len(led_grid[x])):
color = self.col_scheme.get_color(led_grid[x][y], x, y)
# col = c.PALLETE[led_grid[x][y]]
self.led_matrix[x][self.grid_h - 1 - y] = color
return
def make_cb(self):
def button_cb(xcoord, ycoord, edge):
if edge == NeoTrellis.EDGE_RISING:
self.button_bus.put({
'cmd': 'note',
'x': xcoord,
'y': self.grid_h - 1 - ycoord
})
return
return button_cb
def draw_load_screen(self):
return
class Trellis(ActorThread):
"""Physical Trellis hardware"""
def __init__(self, i2c_bus):
super().__init__()
self.led_matrix = [[BLANK for x in range(W)] for y in range(H)]
self.old_led_matrix = [[BLANK for x in range(W)] for y in range(H)]
self.trelli = [[] for i in range(int(H/4))] # [[],[]]
print("Creating Trelli")
for x, slice in enumerate(trellis_addresses):
for y, addr in enumerate(slice):
t = NeoTrellis(i2c_bus, False, addr=addr)
t.pixels.auto_write = False
self.trelli[x].append(t)
sleep(0.1)
pass
print("Linking Trelli")
self.trellis = MultiTrellis(self.trelli)
print("Trelli linked")
button_cb = self.make_button_cb()
print("Initializing Trelli inputs")
for y in range(H):
for x in range(W):
pass
sleep(0.01)
self.trellis.activate_key(x, y, NeoTrellis.EDGE_RISING)
sleep(0.01)
self.trellis.activate_key(x, y, NeoTrellis.EDGE_FALLING)
self.trellis.set_callback(x, y, button_cb)
debug("Inputs initialized")
self.blank_screen()
def make_button_cb(self):
def button_cb(xcoord, ycoord, edge):
if edge == NeoTrellis.EDGE_RISING:
post('button_grid', {'event': 'press', 'x': xcoord, 'y': H-1-ycoord})
elif edge == NeoTrellis.EDGE_FALLING:
post('button_grid', {'event': 'release', 'x': xcoord, 'y': H-1-ycoord})
return
return button_cb
def blank_screen(self):
self.cb_draw_grid({'led_grid': [[BLANK for x in range(W)] for y in range(H)]})
def cb_draw_grid(self, msg):
led_grid = msg['led_grid']
diffs = []
for x in range(len(self.old_led_matrix)):
for y in range(len(self.old_led_matrix[x])):
if led_grid[x][y] != self.old_led_matrix[x][y]:
col = led_grid[x][y]
diffs.append((x, y, col))
self.old_led_matrix[x][y] = col
self.trellis.color(diff[0], diff[1], diff[2])
sleep(0.001)
# for diff in diffs:
# self.trellis.color(diff[0], diff[1], diff[2])
# sleep(0.001)
if len(diffs) > 0:
if not AUTO_WRITE:
for x, y in boards_to_update(diffs):
pass
self.trellis._trelli[x][y].pixels.show()
# for ts in self.trellis._trelli:
# for t in ts:
# t.pixels.show()
return
def cb_anymsg(self, msg):
self.cb_draw_grid(msg)
return
i2c_bus = busio.I2C(SCL, SDA)
"""create the trellis. This is for a 2x2 array of NeoTrellis boards
for a 2x1 array (2 boards connected left to right) you would use:
trelli = [
[NeoTrellis(i2c_bus, False, addr=0x2E), NeoTrellis(i2c_bus, False, addr=0x2F)]
]
"""
trelli = [
[NeoTrellis(i2c_bus, False, addr=0x2E), NeoTrellis(i2c_bus, False, addr=0x2F)],
[NeoTrellis(i2c_bus, False, addr=0x30), NeoTrellis(i2c_bus, False, addr=0x31)]
]
trellis = MultiTrellis(trelli)
#some color definitions
OFF = (0, 0, 0)
RED = (255, 0, 0)
YELLOW = (255, 150, 0)
GREEN = (0, 255, 0)
CYAN = (0, 255, 255)
BLUE = (0, 0, 255)
PURPLE = (180, 0, 255)
#this will be called when button events are received
def blink(xcoord, ycoord, edge):
#turn the LED on when a rising edge is detected
if edge == NeoTrellis.EDGE_RISING:
trellis.color(xcoord, ycoord, BLUE)
