def main():
module = AnsibleModule(
argument_spec=dict(
clicommand=dict(required=True),
outputfile=dict(required=True),
host=dict(required=True),
deviceType=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
cliCommand = module.params['clicommand']
deviceType = module.params['deviceType']
outputfile = module.params['outputfile']
hostIP = module.params['host']
output = ""
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3, remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2, remote_conn)
# Go to config mode
output = output + cnos.waitForDeviceResponse("configure d\n", "(config)#", 2, remote_conn)
# Send the CLi command
output = output + cnos.waitForDeviceResponse(cliCommand + "\n", "(config)#", 2, remote_conn)
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if(errorMsg is None):
module.exit_json(changed=True, msg="CLI command executed and results saved in file ")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(
argument_spec=dict(
clicommand=dict(required=True),
outputfile=dict(required=True),
host=dict(required=True),
deviceType=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
cliCommand = module.params['clicommand']
deviceType = module.params['deviceType']
outputfile = module.params['outputfile']
hostIP = module.params['host']
output = ""
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3, remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2, remote_conn)
# Go to config mode
output = output + cnos.waitForDeviceResponse("configure d\n", "(config)#", 2, remote_conn)
# Send the CLi command
output = output + cnos.waitForDeviceResponse(cliCommand + "\n", "(config)#", 2, remote_conn)
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if(errorMsg is None):
module.exit_json(changed=True, msg="CLI command executed and results saved in file ")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
protocol=dict(required=True),
serverip=dict(required=True),
imgpath=dict(required=True),
imgtype=dict(required=True),
serverusername=dict(required=False),
serverpassword=dict(required=False, no_log=True),
),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
outputfile = module.params['outputfile']
host = module.params['host']
deviceType = module.params['deviceType']
protocol = module.params['protocol'].lower()
imgserverip = module.params['serverip']
imgpath = module.params['imgpath']
imgtype = module.params['imgtype']
imgserveruser = module.params['serverusername']
imgserverpwd = module.params['serverpassword']
output = ""
timeout = 120
tftptimeout = 600
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(host, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3,
remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2,
remote_conn)
transfer_status = ""
# Invoke method for image transfer from server
if (protocol == "tftp" or protocol == "ftp"):
transfer_status = cnos.doImageTransfer(protocol, tftptimeout,
imgserverip, imgpath, imgtype,
imgserveruser, imgserverpwd,
remote_conn)
elif (protocol == "sftp" or protocol == "scp"):
transfer_status = cnos.doSecureImageTransfer(protocol, timeout,
imgserverip, imgpath,
imgtype, imgserveruser,
imgserverpwd, remote_conn)
else:
transfer_status = "Invalid Protocol option"
output = output + "\n Image Transfer status \n" + transfer_status
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True, msg="Image file tranferred to device")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
commandfile=dict(required=True),
outputfile=dict(required=True),
host=dict(required=True),
deviceType=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
commandfile = module.params['commandfile']
outputfile = module.params['outputfile']
deviceType = module.params['deviceType']
hostIP = module.params['host']
output = ""
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3,
remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2,
remote_conn)
# Go to config mode
output = output + cnos.waitForDeviceResponse("configure d\n", "(config)#",
2, remote_conn)
# Send commands one by one
#with open(commandfile, "r") as f:
f = open(commandfile, "r")
for line in f:
# Omit the comment lines in template file
if not line.startswith("#"):
command = line
if not line.endswith("\n"):
command = command + "\n"
response = cnos.waitForDeviceResponse(command, "#", 2, remote_conn)
errorMsg = cnos.checkOutputForError(response)
output = output + response
if (errorMsg is not None):
break # To cater to Mufti case
# Write to memory
output = output + cnos.waitForDeviceResponse("save\n", "#", 3, remote_conn)
# Write output to file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True, msg="Template Applied")
else:
module.fail_json(msg=errorMsg)
def main():
#
# Define parameters for vlan creation entry
#
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
vlanArg1=dict(required=True),
vlanArg2=dict(required=False),
vlanArg3=dict(required=False),
vlanArg4=dict(required=False),
vlanArg5=dict(required=False),
),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
vlanArg1 = module.params['vlanArg1']
vlanArg2 = module.params['vlanArg2']
vlanArg3 = module.params['vlanArg3']
vlanArg4 = module.params['vlanArg4']
vlanArg5 = module.params['vlanArg5']
outputfile = module.params['outputfile']
hostIP = module.params['host']
deviceType = module.params['deviceType']
output = ""
if not HAS_PARAMIKO:
module.fail_json(msg='paramiko is required for this module')
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in
# your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + \
cnos.enterEnableModeForDevice(enablePassword, 3, remote_conn)
# Make terminal length = 0
output = output + \
cnos.waitForDeviceResponse("terminal length 0\n", "#", 2, remote_conn)
# Go to config mode
output = output + \
cnos.waitForDeviceResponse("conf d\n", "(config)#", 2, remote_conn)
# Send the CLi command
output = output + \
cnos.vlanConfig(
remote_conn, deviceType, "(config)#", 2, vlanArg1, vlanArg2,
vlanArg3, vlanArg4, vlanArg5)
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# need to add logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True,
msg="VLAN configuration is accomplished")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
cliCommand = "reload \n"
outputfile = module.params['outputfile']
hostIP = module.params['host']
deviceType = module.params['deviceType']
output = ""
if not HAS_PARAMIKO:
module.fail_json(msg='paramiko is required for this module')
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3,
remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2,
remote_conn)
# Send the CLi command
output = output + cnos.waitForDeviceResponse(cliCommand, "(y/n):", 2,
remote_conn)
# Send the Confirmation y
output = output + cnos.waitForDeviceResponse("y\n", "#", 2, remote_conn)
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
errorMsg = cnos.checkOutputForError(output)
if (errorMsg in "Device Response Timed out"):
module.exit_json(changed=True,
msg="Device is Reloading. Please wait...")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
interfaceRange=dict(required=False),
interfaceOption=dict(required=False),
interfaceArg1=dict(required=True),
interfaceArg2=dict(required=False),
interfaceArg3=dict(required=False),
interfaceArg4=dict(required=False),
interfaceArg5=dict(required=False),
interfaceArg6=dict(required=False),
interfaceArg7=dict(required=False),
),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
interfaceRange = module.params['interfaceRange']
interfaceOption = module.params['interfaceOption']
interfaceArg1 = module.params['interfaceArg1']
interfaceArg2 = module.params['interfaceArg2']
interfaceArg3 = module.params['interfaceArg3']
interfaceArg4 = module.params['interfaceArg4']
interfaceArg5 = module.params['interfaceArg5']
interfaceArg6 = module.params['interfaceArg6']
interfaceArg7 = module.params['interfaceArg7']
outputfile = module.params['outputfile']
hostIP = module.params['host']
deviceType = module.params['deviceType']
output = ""
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3,
remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2,
remote_conn)
# Go to config mode
output = output + cnos.waitForDeviceResponse("configure d\n", "(config)#",
2, remote_conn)
# Send the CLi command
if (interfaceOption is None or interfaceOption == ""):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, None, interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4,
interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "ethernet"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "ethernet",
interfaceRange, interfaceArg1, interfaceArg2, interfaceArg3,
interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "loopback"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "loopback",
interfaceRange, interfaceArg1, interfaceArg2, interfaceArg3,
interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "mgmt"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "mgmt", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4,
interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "port-aggregation"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "port-aggregation",
interfaceRange, interfaceArg1, interfaceArg2, interfaceArg3,
interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "vlan"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "vlan", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4,
interfaceArg5, interfaceArg6, interfaceArg7)
else:
output = "Invalid interface option \n"
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True, msg="Interface Configuration is done")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(
argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
protocol=dict(required=True),
serverip=dict(required=True),
imgpath=dict(required=True),
imgtype=dict(required=True),
serverusername=dict(required=False),
serverpassword=dict(required=False, no_log=True),),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
outputfile = module.params['outputfile']
host = module.params['host']
deviceType = module.params['deviceType']
protocol = module.params['protocol'].lower()
imgserverip = module.params['serverip']
imgpath = module.params['imgpath']
imgtype = module.params['imgtype']
imgserveruser = module.params['serverusername']
imgserverpwd = module.params['serverpassword']
output = ""
timeout = 120
tftptimeout = 600
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(host, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3, remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2, remote_conn)
transfer_status = ""
# Invoke method for image transfer from server
if(protocol == "tftp" or protocol == "ftp"):
transfer_status = cnos.doImageTransfer(protocol, tftptimeout, imgserverip, imgpath, imgtype, imgserveruser, imgserverpwd, remote_conn)
elif(protocol == "sftp" or protocol == "scp"):
transfer_status = cnos.doSecureImageTransfer(protocol, timeout, imgserverip, imgpath, imgtype, imgserveruser, imgserverpwd, remote_conn)
else:
transfer_status = "Invalid Protocol option"
output = output + "\n Image Transfer status \n" + transfer_status
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if(errorMsg is None):
module.exit_json(changed=True, msg="Image file tranferred to device")
else:
module.fail_json(msg=errorMsg)
def main():
#
# Define parameters for config save entry
#
module = AnsibleModule(
argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
#deviceType=dict(required=True),),
deviceType=dict(required=False),
),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
cliCommand = "write memory \n"
outputfile = module.params['outputfile']
hostIP = module.params['host']
#deviceType = module.params['deviceType']
deviceType = "g8272_cnos"
output = ""
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP,
username=username,
password=password,
look_for_keys=False)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3,
remote_conn)
#Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal-length 0\n", "#", 2,
remote_conn)
#cnos.debugOutput(cliCommand)
#Send the CLi command
output = output + cnos.waitForDeviceResponse(cliCommand, "#", 2,
remote_conn)
#Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
errorMsg = cnos.checkOutputForError(output)
if (errorMsg == None):
module.exit_json(
changed=True,
msg="Switch Running Config is Saved to Startup Config ")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(
argument_spec=dict(
commandfile=dict(required=True),
outputfile=dict(required=True),
host=dict(required=True),
deviceType=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
commandfile = module.params['commandfile']
outputfile = module.params['outputfile']
deviceType = module.params['deviceType']
hostIP = module.params['host']
output = ""
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3, remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2, remote_conn)
# Go to config mode
output = output + cnos.waitForDeviceResponse("configure d\n", "(config)#", 2, remote_conn)
# Send commands one by one
#with open(commandfile, "r") as f:
f = open(commandfile, "r")
for line in f:
# Omit the comment lines in template file
if not line.startswith("#"):
command = line
if not line.endswith("\n"):
command = command+"\n"
response = cnos.waitForDeviceResponse(command, "#", 2, remote_conn)
errorMsg = cnos.checkOutputForError(response)
output = output + response
if(errorMsg is not None):
break # To cater to Mufti case
# Write to memory
output = output + cnos.waitForDeviceResponse("save\n", "#", 3, remote_conn)
# Write output to file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if(errorMsg is None):
module.exit_json(changed=True, msg="Template Applied")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(
argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
interfaceRange=dict(required=False),
interfaceOption=dict(required=False),
interfaceArg1=dict(required=True),
interfaceArg2=dict(required=False),
interfaceArg3=dict(required=False),
interfaceArg4=dict(required=False),
interfaceArg5=dict(required=False),
interfaceArg6=dict(required=False),
interfaceArg7=dict(required=False),),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
interfaceRange = module.params['interfaceRange']
interfaceOption = module.params['interfaceOption']
interfaceArg1 = module.params['interfaceArg1']
interfaceArg2 = module.params['interfaceArg2']
interfaceArg3 = module.params['interfaceArg3']
interfaceArg4 = module.params['interfaceArg4']
interfaceArg5 = module.params['interfaceArg5']
interfaceArg6 = module.params['interfaceArg6']
interfaceArg7 = module.params['interfaceArg7']
outputfile = module.params['outputfile']
hostIP = module.params['host']
deviceType = module.params['deviceType']
output = ""
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3, remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2, remote_conn)
# Go to config mode
output = output + cnos.waitForDeviceResponse("configure d\n", "(config)#", 2, remote_conn)
# Send the CLi command
if(interfaceOption is None or interfaceOption == ""):
output = output + cnos.interfaceConfig(remote_conn, deviceType, "(config)#", 2, None, interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif(interfaceOption == "ethernet"):
output = output + cnos.interfaceConfig(remote_conn, deviceType, "(config)#", 2, "ethernet", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif(interfaceOption == "loopback"):
output = output + cnos.interfaceConfig(remote_conn, deviceType, "(config)#", 2, "loopback", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif(interfaceOption == "mgmt"):
output = output + cnos.interfaceConfig(remote_conn, deviceType, "(config)#", 2, "mgmt", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif(interfaceOption == "port-aggregation"):
output = output + cnos.interfaceConfig(remote_conn, deviceType, "(config)#", 2, "port-aggregation", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif(interfaceOption == "vlan"):
output = output + cnos.interfaceConfig(remote_conn, deviceType, "(config)#", 2, "vlan", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
else:
output = "Invalid interface option \n"
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if(errorMsg is None):
module.exit_json(changed=True, msg="Interface Configuration is done")
else:
module.fail_json(msg=errorMsg)