def __init__(self, search_timeout_sec=120):
"""
Create Ant+ node, network, and initialize all attributes
"""
self.search_timeout_sec = search_timeout_sec
self.device = driver.USB2Driver()
self.antnode = Node(self.device)
self.network = Network(key=NETWORK_KEY_ANT_PLUS, name='N:ANT+')
# Start search for sensors and register callbacks:
self.device_power_meter = BicyclePower(self.antnode,
self.network,
callbacks={
'onDevicePaired':
self._on_device_found,
'onPowerData':
self._on_power_data,
'onChannelClosed':
self._on_channel_closed,
'onSearchTimeout':
self._on_search_timeout
})
self._power_meter_status = AntSensors.SensorStatus(fresh_time_s=2)
self.device_heart_rate = HeartRate(self.antnode,
self.network,
callbacks={
'onDevicePaired':
self._on_device_found,
'onHeartRateData':
self._on_heartrate_data,
'onChannelClosed':
self._on_channel_closed,
'onSearchTimeout':
self._on_search_timeout
})
self._heart_rate_status = AntSensors.SensorStatus(fresh_time_s=2)
self._reconnect = True
# Heartrate fields
self._heartrate_bpm = None
self._rr_interval_ms = None
self._hr_event_time_ms = None
# Power meter fields
self._instantaneous_power_watts = None
self._cadence_rpm = None
self._accumulated_power_watts = None
self._power_event_count = None
class AntNode:
deviceManager: [DeviceManager] = []
def __init__(self):
os.system("usbreset 0fcf:1008")
self.node = Node(driver.USB2Driver())
self.network = Network(key=NETWORK_KEY_ANT_PLUS, name='N:ANT+')
def add_heart_rate_monitor(self, sensor: Sensor, on_data_received):
device = DeviceManager(
HeartRate(self.node, self.network,
{'onHeartRateData': on_data_received}),
sensor.ant_channel_id)
self.deviceManager.append(device)
def start(self):
try:
self.node.start()
self.node.setNetworkKey(NETWORK_NUMBER_PUBLIC, self.network)
logger.info('ANT started. Connecting to devices...')
for profile in self.deviceManager:
profile.open()
except ANTException as err:
logger.info(f'Could not start ANT.\n{err}')
# ya you better call these or you may have to unplug the antnode+ stick
def shutdown(self):
for profile in self.deviceManager:
profile.close()
self.node.stop()
cadence, power):
print("Speed Km/h {} Cadence {} Power {}".format(str(kmSpeed),
str(cadence), str(power)))
print("#########################################################")
#-------------------------------------------------#
# Initialization #
#-------------------------------------------------#
try:
reset_USB_Device()
except Exception as ex:
print(ex)
antnode = Node(driver.USB2Driver(log=LOG, debug=DEBUG, idProduct=0x1008))
try:
antnode.start()
network = Network(key=NETWORK_KEY_ANT_PLUS, name='N:ANT+')
antnode.setNetworkKey(NETWORK_NUMBER_PUBLIC, network)
myTrainer = bikeTrainer(
antnode, network, {
'onDevicePaired': device_paired,
'onSearchTimeout': search_timed_out,
'onChannelClosed': channel_closed,
'onBikeTrainer': bike_Trainer
})
# Unpaired, search:
myTrainer.open()
print('ANT started. Connecting to devices...')
except ANTException as err:
def __init__(self):
os.system("usbreset 0fcf:1008")
self.node = Node(driver.USB2Driver())
self.network = Network(key=NETWORK_KEY_ANT_PLUS, name='N:ANT+')
# -*- coding: utf-8 -*-
"""Demonstrate the use of the ANT+ Heart Rate Device Profile
"""
import time
from ant.core import driver
from ant.core.node import Node, Network, ChannelID
from ant.core.constants import NETWORK_KEY_ANT_PLUS, NETWORK_NUMBER_PUBLIC
from ant.plus.heartrate import *
from config import *
device = driver.USB2Driver(log=LOG, debug=DEBUG, idProduct=0x1009)
antnode = Node(device)
antnode.start()
network = Network(key=NETWORK_KEY_ANT_PLUS, name='N:ANT+')
antnode.setNetworkKey(NETWORK_NUMBER_PUBLIC, network)
def device_found(self, device_number, transmission_type):
print("Detect monitor device number: %d, transmission type: %d" %
(device_number, transmission_type))
def heartrate_data(self, computed_heartrate, event_time_ms, rr_interval_ms):
if rr_interval_ms is not None:
print("Heart rate: %d, event time(ms): %d, rr interval (ms): %d" %
(computed_heartrate, event_time_ms, rr_interval_ms))
else:
def main():
global mainloop
idProduct = prepare_usb("ANTUSB")
device = driver.USB2Driver(log=LOG, debug=DEBUG, idProduct=idProduct)
antnode = Node(device)
antnode.start()
network = Network(key=NETWORK_KEY_ANT_PLUS, name='N:ANT+')
antnode.setNetworkKey(NETWORK_NUMBER_PUBLIC, network)
POWER_SENSOR_ID = id_from_serial(1)
#POWER_SENSOR_ID = 12345
print("Start power meter ID %d" % POWER_SENSOR_ID)
pm = PowerMeterTx(antnode, network, POWER_SENSOR_ID)
def device_found(self, channelID):
print("Detect %s" % str(channelID))
def updatePower(self, cadence, accPower, power):
pm.update(cadence, accPower, power)
def heartrate_data(computed_heartrate, event_time_ms, rr_interval_ms):
if HR_DEBUG:
if rr_interval_ms is not None:
print(
"Heart rate: %d, event time(ms): %d, rr interval (ms): %d"
% (computed_heartrate, event_time_ms, rr_interval_ms))
else:
print("Heart rate: %d" % (computed_heartrate, ))
ble_hrm_update_hr(computed_heartrate)
hr = HeartRate(antnode,
network,
callbacks={
'onDevicePaired': device_found,
'onHeartRateData': heartrate_data
})
fe = FitnessEquipment(antnode,
network,
callbacks={
'onDevicePaired': device_found,
'onPowerUpdated': updatePower
})
# Unpaired, search:
hr.open()
pm.open()
fe.open()
# Paired to a specific device:
#fe.open(ChannelID(53708, 17, 37))
#hr.open(ChannelID(21840, 120 ,81))
print("++++++++++++++++++++++++++++++++++")
monitor = None
mainloop = GLib.MainLoop()
ble_hrm_start()
#while True:
# try:
# time.sleep(1)
# except KeyboardInterrupt:
# break
try:
mainloop.run()
except KeyboardInterrupt:
print("KeyboardInterrupt")
ble_hrm_stop()
print("+++++++++++++++++++---------------")
fe.close()
pm.close()
hr.close()
antnode.stop()
class AntSensors():
"""
ANT+ Heartrate and Power Meter sensor handler
"""
class SensorStatus():
"""
Tracks the status of a sensor device, whether it's connected
and if its data is fresh.
"""
class State(Enum):
"""
State of an ANT+ sensor
"""
NOTCONNECTED = 1
CONNECTED = 2
STALE = 3
def __init__(self, fresh_time_s=15):
self._connected = False
self._last_seen_time = None
self._fresh_time_s = fresh_time_s
def make_fresh(self):
""" Marks the sensor as connected and makes last seen time now"""
self._connected = True
self._last_seen_time = dt.now()
def make_disconnected(self):
""" Marks the sensor as disconnceted"""
self._connected = False
@property
def state(self):
""" Returns the state of the sensor
Returns:
SensorStatus.State representing current state
"""
if not self._connected:
_s = self.State.NOTCONNECTED
elif (self._last_seen_time
and (dt.now() - self._last_seen_time).total_seconds() >
self._fresh_time_s):
_s = self.State.STALE
else:
_s = self.State.CONNECTED
return _s
class SensorError(Exception):
"""
Exceptions for ANT+ sensors.
"""
class ErrorType(Enum):
"""
Type of ANT+ sensor error
"""
UNKNOWN = 1
USB = 2
NODE = 3
TIMEOUT = 4
def __init__(self,
expression=None,
message="",
err_type=ErrorType.UNKNOWN):
super().__init__(message)
self.expression = expression
self.message = message
self.err_type = err_type
def __init__(self, search_timeout_sec=120):
"""
Create Ant+ node, network, and initialize all attributes
"""
self.search_timeout_sec = search_timeout_sec
self.device = driver.USB2Driver()
self.antnode = Node(self.device)
self.network = Network(key=NETWORK_KEY_ANT_PLUS, name='N:ANT+')
# Start search for sensors and register callbacks:
self.device_power_meter = BicyclePower(self.antnode,
self.network,
callbacks={
'onDevicePaired':
self._on_device_found,
'onPowerData':
self._on_power_data,
'onChannelClosed':
self._on_channel_closed,
'onSearchTimeout':
self._on_search_timeout
})
self._power_meter_status = AntSensors.SensorStatus(fresh_time_s=2)
self.device_heart_rate = HeartRate(self.antnode,
self.network,
callbacks={
'onDevicePaired':
self._on_device_found,
'onHeartRateData':
self._on_heartrate_data,
'onChannelClosed':
self._on_channel_closed,
'onSearchTimeout':
self._on_search_timeout
})
self._heart_rate_status = AntSensors.SensorStatus(fresh_time_s=2)
self._reconnect = True
# Heartrate fields
self._heartrate_bpm = None
self._rr_interval_ms = None
self._hr_event_time_ms = None
# Power meter fields
self._instantaneous_power_watts = None
self._cadence_rpm = None
self._accumulated_power_watts = None
self._power_event_count = None
def connect(self):
"""
Attaches to the ANT+ dongle and begins search for heartrate
and power meter sensors.
"""
try:
self.antnode.start()
self.antnode.setNetworkKey(NETWORK_NUMBER_PUBLIC, self.network)
except exceptions.DriverError as e:
raise AntSensors.SensorError(
message=e.args[0],
err_type=AntSensors.SensorError.ErrorType.USB)
except exceptions.NodeError as e:
raise AntSensors.SensorError(
message=e.args[0],
err_type=AntSensors.SensorError.ErrorType.NODE)
# Reinitialize all data fields
self._heartrate_bpm = None
self._rr_interval_ms = None
self._hr_event_time_ms = None
self._instantaneous_power_watts = None
self._cadence_rpm = None
self._accumulated_power_watts = None
self._power_event_count = None
# Open device and start searching
self.device_heart_rate.open(searchTimeout=self.search_timeout_sec)
self.device_power_meter.open(searchTimeout=self.search_timeout_sec)
def close(self):
"""
Safely closes down the dongle interface and releases resources
prior to exit.
"""
self._reconnect = False
if (self.device_heart_rate.state
and self.device_heart_rate.state != ChannelState.CLOSED):
self.device_heart_rate.close()
if (self.device_power_meter.state
and self.device_power_meter.state != ChannelState.CLOSED):
self.device_power_meter.close()
try:
self.antnode.stop()
except (exceptions.NodeError, exceptions.DriverError):
pass
def _on_device_found(self, device, ch_id):
#TODO: make the device number available
print("Found a {:s} device".format(device.name))
print(
"device number: {:d} device type {:d}, transmission type: {:d}\r\n"
.format(ch_id.deviceNumber, ch_id.deviceType,
ch_id.transmissionType))
def _on_channel_closed(self, device):
if device == self.device_heart_rate:
self._heart_rate_status.make_disconnected()
elif device == self.device_power_meter:
self._power_meter_status.make_disconnected()
else:
print("Unknown device channel closed!")
print("Channel closed for {:s}".format(device.name))
# TODO - figure out why re-open doesn't work - returns USB Driver error,
# perhaps something wasn't properly freed on close?
#if self._reconnect == True:
# print("Attempting re-connect...")
# device.open()
def _on_search_timeout(self, device):
raise AntSensors.SensorError(
message="Timed out searching for device: {}".format(device.name),
err_type=AntSensors.SensorError.ErrorType.TIMEOUT)
def _on_heartrate_data(self, computed_heartrate, event_time_ms,
rr_interval_ms):
self._heartrate_bpm = computed_heartrate
self._rr_interval_ms = rr_interval_ms
if (not self._hr_event_time_ms
) or event_time_ms > self._hr_event_time_ms:
self._hr_event_time_ms = event_time_ms
self._heart_rate_status.make_fresh()
def _on_power_data(self, event_count, _, cadence_rpm,
accumulated_power_watts, instantaneous_power_watts):
self._instantaneous_power_watts = instantaneous_power_watts
self._cadence_rpm = cadence_rpm
self._accumulated_power_watts = accumulated_power_watts
if (not self._power_event_count
) or event_count != self._power_event_count:
self._power_event_count = event_count
self._power_meter_status.make_fresh()
@property
def heartrate_bpm(self):
"""
Returns heartrate in beats per minute (BPM) or None if heartrate data are not
available or fresh.
"""
#TODO: check for stale data (if no update in xx sec, return None)
return self._heartrate_bpm
@property
def power_watts(self):
"""
Returns power in Watts if available, or None if not available or fresh.
"""
#TODO: return calculated power from accumulated power if there are event_count gaps
#TODO: check for stale data (if no update in xx sec, return None)
return self._instantaneous_power_watts
@property
def cadence_rpm(self):
"""
Returns cadence in RPM if available or None if not available or fresh.
"""
#TODO: check for stale data (if no update in xx sec, return None)
return self._cadence_rpm
@property
def heart_rate_status(self):
"""
Returns status of heart rate sensor.
"""
return self._heart_rate_status.state
@property
def power_meter_status(self):
"""
Returns status of power meter sensor.
"""
return self._power_meter_status.state
# -*- coding: utf-8 -*-
"""Demonstrate the use of the ANT+ Heart Rate Device Profile
"""
import time
from ant.core import driver
from ant.core.node import Node
from ant.plus.heartrate import *
from config import *
device = driver.USB2Driver(log=LOG, debug=DEBUG)
antnode = Node(device)
antnode.start()
# Unpaired, search:
hr = HeartRate(antnode)
# Paired to a specific device:
#hr = HeartRate(antnode, 23359, 1)
#hr = HeartRate(antnode, 21840, 81)
monitor = None
while True:
try:
time.sleep(1)
if hr.state == STATE_RUNNING:
print "Computed heart rate: {}".format(hr.computed_heart_rate)
