def post(self, dpid=None, group_id=None):
logger.debug("requst url - %s", self.get_request_uri())
logger.debug("requst params - dpid : %s, group_id: %s", dpid, group_id)
ret = {}
body = None
group = None
mdata_list = []
act_len = 0
try:
version = mul.nbapi_get_switch_version_with_id(int(dpid, 16))
if version == 0:
raise Exception, 'no such switch'
elif version == 1:
raise Exception, 'Not supported switch OFP version'
body = GroupSchema().deserialize(json.loads(self.request.body))
group = mul.prepare_add_group(str(body['group_id']), str(body['type']))
for action_bucket in body['action_buckets']:
mdata = mul.nbapi_group_mdata_alloc(int(dpid, 16))
if mdata is None:
raise Exception, 'failed to set mdata'
mdata_list.append(mdata)
for action in action_bucket['actions']:
check = mul.nbapi_action_to_mdata(mdata, str(action['action']), str(action['value']))
if check is not 0:
raise Exception, 'Malformed action data '+str(action['action'])+" : "+str(action['value'])
mul.nbapi_group_action_add(act_len, group, mdata, str(action_bucket['weight']), str(action_bucket['ff_port']), str(action_bucket['ff_group']))
act_len +=1
check = mul.nbapi_group_add(act_len, int(dpid, 16), group)
if check == 0:
ret.update({"group_id" : str(body['group_id'])})
else:
raise Exception, 'failed to add group'
except Exception, e:
ret.update({"error_message" : "failed to add group", "reason" : str(e)})
def post(self, dpid=None, group_id=None):
logger.debug("requst url - %s", self.get_request_uri())
logger.debug("requst params - dpid : %s, group_id: %s", dpid, group_id)
ret = {}
body = None
group = None
mdata_list = []
act_len = 0
try:
version = mul.nbapi_get_switch_version_with_id(int(dpid, 16))
if version == 0:
raise Exception, 'no such switch'
elif version == 1:
raise Exception, 'Not supported switch OFP version'
body = GroupSchema().deserialize(json.loads(self.request.body))
group = mul.prepare_add_group(str(body['group_id']), str(body['type']))
for action_bucket in body['action_buckets']:
mdata = mul.nbapi_group_mdata_alloc(int(dpid, 16))
if mdata is None:
raise Exception, 'failed to set mdata'
mdata_list.append(mdata)
for action in action_bucket['actions']:
check = mul.nbapi_action_to_mdata(mdata, str(action['action']), str(action['value']))
if check is not 0:
raise Exception, 'Malformed action data '+str(action['action'])+" : "+str(action['value'])
mul.nbapi_group_action_add(act_len, group, mdata, str(action_bucket['weight']), str(action_bucket['ff_port']), str(action_bucket['ff_group']))
act_len +=1
check = mul.nbapi_group_add(act_len, int(dpid, 16), group)
if check == 0:
ret.update({"group_id" : str(body['group_id'])})
else:
raise Exception, 'failed to add group'
except Exception, e:
ret.update({"error_message" : "failed to add group", "reason" : str(e)})
def __add_flow(self, dpid, requestbody):
body = FlowSchema().deserialize(requestbody)
#logger.debug(body)
drop = check = 0
mdata = mul.nbapi_mdata_alloc(int(dpid, 16))
if mdata is None:
return 'switch not exist'
for instruction in body['instructions']:
if instruction['instruction'] == 'APPLY_ACTIONS':
check = mul.nbapi_mdata_inst_apply(mdata)
elif instruction['instruction'] == 'WRITE_ACTIONS':
check = mul.nbapi_mdata_inst_write(mdata)
elif instruction['instruction'] == 'METER':
check = mul.nbapi_mdata_inst_meter(mdata,
int(instruction['value']))
elif instruction['instruction'] == 'GOTO_TABLE':
check = mul.nbapi_mdata_inst_goto(mdata,
int(instruction['value']))
if check != 0:
return 'failed to set instruction' + str(
instruction['instruction'])
check = -1
for action in instruction['actions']:
if 'DROP' == str(action['action']):
drop = 1
check = 0
else:
check = mul.nbapi_action_to_mdata(mdata,
str(action['action']),
str(action['value']))
if check != 0:
return 'failed to set action ' + action[
'action'] + ' : ' + action['value'] + str(check)
start = datetime.datetime.now()
check = mul.add_static_flow(int(dpid, 16), int(body['priority']),
str(body['barrier']), str(body['stat']),
mdata, drop, str(body['dl_src']),
str(body['dl_dst']), str(body['dl_type']),
str(body['dl_vlan']),
str(body['dl_vlan_pcp']),
str(body['mpls_label']),
str(body['mpls_tc']),
str(body['mpls_bos']), str(body['nw_src']),
str(body['nw_src6']), str(body['nw_dst']),
str(body['nw_dst6']),
str(body['nw_proto']), str(body['nw_tos']),
str(body['tp_dst']), str(body['tp_src']),
str(body['in_port']),
str(body['table_id']))
total = datetime.datetime.now() - start
if check == 0:
#flow_id = self.__make_flow_id(int(dpid, 16), flow, mask, int(body['priority']))
return "%10f" % float(total.total_seconds() * 10000)
#return 'success'
else:
return 'flow already exist'
def __add_flow(self, dpid, requestbody):
body=FlowSchema().deserialize(requestbody)
#logger.debug(body)
drop = check = 0
mdata = mul.nbapi_mdata_alloc(int(dpid, 16))
if mdata is None:
return 'switch not exist'
for instruction in body['instructions']:
if instruction['instruction'] == 'APPLY_ACTIONS':
check = mul.nbapi_mdata_inst_apply(mdata)
elif instruction['instruction'] == 'WRITE_ACTIONS':
check = mul.nbapi_mdata_inst_write(mdata)
elif instruction['instruction'] == 'METER':
check = mul.nbapi_mdata_inst_meter(mdata, int(instruction['value']))
elif instruction['instruction'] == 'GOTO_TABLE':
check = mul.nbapi_mdata_inst_goto(mdata, int(instruction['value']))
if check != 0:
return 'failed to set instruction'+str(instruction['instruction'])
check = -1
for action in instruction['actions']:
if 'DROP' == str(action['action']):
drop = 1
check = 0
else:
check = mul.nbapi_action_to_mdata(mdata, str(action['action']), str(action['value']))
if check != 0:
return 'failed to set action '+action['action']+' : '+action['value']+str(check)
start=datetime.datetime.now()
check = mul.add_static_flow(int(dpid,16),
int(body['priority']),str(body['barrier']),str(body['stat']),
mdata, drop,
str(body['dl_src']),str(body['dl_dst']),str(body['dl_type']),str(body['dl_vlan']),str(body['dl_vlan_pcp']),str(body['mpls_label']),str(body['mpls_tc']),str(body['mpls_bos']),str(body['nw_src']),str(body['nw_src6']),str(body['nw_dst']),str(body['nw_dst6']),str(body['nw_proto']),str(body['nw_tos']),str(body['tp_dst']),str(body['tp_src']),str(body['in_port']),str(body['table_id']))
total=datetime.datetime.now()-start
if check == 0:
#flow_id = self.__make_flow_id(int(dpid, 16), flow, mask, int(body['priority']))
return "%10f"%float(total.total_seconds()*10000)
#return 'success'
else:
return 'flow already exist'
def post(self, dpid, flow_id=None):
logger.debug("requset url - %s", self.get_request_uri())
logger.debug("request params - dpid: %s, flow_id: %s", dpid, flow_id)
ret = {}
flow = mask = mdata = None
new_flow_id = None
try:
body = FlowSchema().deserialize(json.loads(self.request.body))
logger.debug(str(body))
version = int(mul.nbapi_get_switch_version_with_id(int(dpid,16)))
if int(version)==0:
raise Exception, 'switch does not exist'
self.__match_check(version, body)
self.__inst_action_check(version, body)
nw_src = str(body['nw_src']) if int(body['dl_type'], 16) != 0x86dd else str(body['nw_src6'])
nw_dst = str(body['nw_dst']) if int(body['dl_type'], 16) != 0x86dd else str(body['nw_dst6'])
flow = mul.nbapi_make_flow(str(body['dl_src']) ,
str(body['dl_dst']) ,
str(body['dl_type']) ,
str(body['dl_vlan']) ,
str(body['dl_vlan_pcp']),
str(body['mpls_label']),
str(body['mpls_tc']) ,
str(body['mpls_bos']) ,
nw_dst,
nw_src,
str(body['nw_proto']),
str(body['nw_tos']) ,
str(body['tp_dst']) ,
str(body['tp_src']) ,
str(body['in_port']) ,
str(body['table_id']) )
if flow == None:
raise Exception, 'flow failed to alloc'
mask = mul.nbapi_make_mask( str(body['dl_src']),
str(body['dl_dst']),
str(body['dl_type']),
str(body['dl_vlan']),
str(body['dl_vlan_pcp']),
str(body['mpls_label']),
str(body['mpls_tc']),
str(body['mpls_bos']),
nw_dst,
nw_src,
str(body['nw_proto']),
str(body['nw_tos']),
str(body['tp_dst']),
str(body['tp_src']),
str(body['in_port']))
if mask == None:
raise Exception, 'mask failed to alloc'
mdata = mul.nbapi_mdata_alloc(int(dpid, 16))
if mdata == None:
raise Exception, 'cannot set mdata'
drop = check = 0
for instruction in body['instructions']:
if instruction['instruction'] == 'APPLY_ACTIONS':
if version != 1:
check = mul.nbapi_mdata_inst_apply(mdata)
elif instruction['instruction'] == 'WRITE_ACTIONS':
check = mul.nbapi_mdata_inst_write(mdata)
elif instruction['instruction'] == 'METER':
check = mul.nbapi_mdata_inst_meter(mdata, int(instruction['value']))
elif instruction['instruction'] == 'GOTO_TABLE':
check = mul.nbapi_mdata_inst_goto(mdata, int(instruction['value']))
if check != 0:
raise Exception, 'failed to set'+str(instruction['instruction'])
check = -1
for action in instruction['actions']:
if 'DROP' == str(action['action']):
drop = 1
check = 0
else:
check = mul.nbapi_action_to_mdata(mdata, str(action['action']), str(action['value']))
if check != 0:
raise Exception, 'Malformed action data'+action['action']+' : '+action['value']+str(check)
flags = mul.C_FL_ENT_STATIC
if str(body['barrier']) != 'disable':
flags |= mul.C_FL_ENT_BARRIER
if str(body['stat']) != 'disable':
flags |= mul.C_FL_ENT_GSTATS
check = mul.add_static_flow(int(dpid, 16),
flow,
mask,
int(body['priority']),
mdata,
flags,
drop)
if check == 0:
sleep(0.5)
new_flow_id = self.__make_flow_id(int(dpid,16), flow, mask, int(body['priority']))
#new_flow_id = self.__check_flow_realy_in_switch(int(dpid, 16), flow, mask, int(body['priority']))
#new_flow_id = FlowHolder.getInstance().save(int(dpid,16) , flow, mask, int(body['priority']))
#if new_flow_id == None:
# raise Exception, 'this flow is rejected by switch'
if flow_id and flow_id!=new_flow_id:
ret = self.delete(None, flow_id)
else:
ret = { 'flow_id' : str(new_flow_id) }
else:
raise Exception, 'flow already exist'
except Exception, e:
ret.update({"error_message" : "failed to add flow!", "reason" : str(e)})