def save_config(connection, path, config_name):
"""
Saves config file with new content.
Returns empty string for valid flask response and error message otherwise.
"""
new_content = request.values.get('content', '')
root_passwd = request.values.get('root_passwd', '')
if new_content:
try:
f = connection.get_file(os.path.join(path, config_name), 'w')
except Exception as e:
logger.exception(e)
return 'Error while opening file %s.<br>%s' % (config_name, e)
else:
f.write(new_content)
f.close()
logger.info('%s was successfully saved.' % config_name)
elif not new_content:
msg = 'Attempting for writing of empty content to %s.' % config_name
logger.error(msg)
return msg
else:
return 'Invalid root password.'
return ''
def get_mfsmaster_info(connection, host, port, configs_path):
"""
returns some of mfsmaster options in a dictionary
or gives default values, asigned in this module
"""
errors = []
mfsmaster_cfg_path = os.path.join(configs_path, CONFIGS[0])
meta_path = meta_path = moose_options.get('meta_path', '')
version = ''
try:
mfsmaster_cfg = connection.get_file(mfsmaster_cfg_path, 'r')
except mfs_exceptions.OpenRemoteFileFailed:
error = 'Cannot find \"%s\" in %s.' % (CONFIGS[0], configs_path)
logger.error(mfs_exceptions.MetafilesException(error))
else:
lines = mfsmaster_cfg.readlines()
if not meta_path:
meta_path = get_value_by_key('DATA_PATH', lines)
mfsmaster_cfg.close()
if not meta_path:
meta_path = DEFAULT_META_PATH
version = get_master_version(host, port)
if not isinstance(version, tuple):
errors.append(version)
return {
'meta_path': meta_path,
'port': port,
'version': version,
'host': host,
'errors': errors
}
def save_config(connection, path, config_name):
"""
Saves config file with new content.
Returns empty string for valid flask response and error message otherwise.
"""
new_content = request.values.get('content', '')
root_passwd = request.values.get('root_passwd', '')
if new_content:
try:
f = connection.get_file(os.path.join(path, config_name), 'w')
except Exception as e:
logger.exception(e)
return 'Error while opening file %s.<br>%s' % (config_name, e)
else:
f.write(new_content)
f.close()
logger.info('%s was successfully saved.' % config_name)
elif not new_content:
msg = 'Attempting for writing of empty content to %s.' % config_name
logger.error(msg)
return msg
else:
return 'Invalid root password.'
return ''
def resolv_check(config_obj):
# Addresses validation
ip_pattern = re.compile("^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$")
name_pattern = re.compile("(?!-)[A-Z\d-]{1,63}(?<!-)$", re.IGNORECASE)
address_for_valid = {'general': 'host', 'moose_options': 'master_host'}
if config_obj.get('general', 'host') is not None:
for i in address_for_valid:
if not ip_pattern.match(config_obj.get(i, address_for_valid[i])):
if not name_pattern.match(config_obj.get(i, address_for_valid[i])):
msg = '%s address is not valid in %s section.' % (address_for_valid[i], i)
logger.error(msg)
raise mfs_exceptions.AddressValidError(msg)
else:
try:
socket.gethostbyname(config_obj.get(i, address_for_valid[i]))
except Exception:
msg = "%s doesn't resolve" % str(config_obj.get(i, address_for_valid[i]))
logger.error(msg)
raise mfs_exceptions.HostResolveError(msg)
# Check whether master address is valid
master_host = config_obj.get('moose_options', 'master_host')
try:
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((master_host, 22))
except Exception:
msg = '%s host is innaccessible' % str(master_host)
logger(msg)
raise mfs_exceptions.MooseConnectionFailed(msg)
finally:
s.close()
def get_mfsmaster_info(connection, host, port, configs_path):
"""
returns some of mfsmaster options in a dictionary
or gives default values, asigned in this module
"""
errors = []
mfsmaster_cfg_path = os.path.join(configs_path, CONFIGS[0])
meta_path = meta_path = moose_options.get('meta_path', '')
version = ''
try:
mfsmaster_cfg = connection.get_file(mfsmaster_cfg_path, 'r')
except mfs_exceptions.OpenRemoteFileFailed:
error = 'Cannot find \"%s\" in %s.' % (CONFIGS[0], configs_path)
logger.error(mfs_exceptions.MetafilesException(error))
else:
lines = mfsmaster_cfg.readlines()
if not meta_path:
meta_path = get_value_by_key('DATA_PATH', lines)
mfsmaster_cfg.close()
if not meta_path:
meta_path = DEFAULT_META_PATH
version = get_master_version(host, port)
if not isinstance(version, tuple):
errors.append(version)
return {
'meta_path' : meta_path,
'port' : port,
'version' : version,
'host' : host,
'errors' : errors
}
def get_master_version(host, port):
try:
mfs = moose_lib.MooseFS(masterhost=host, masterport=int(port))
version = mfs.masterversion
except Exception as e:
error = 'Failed to connect to %s:%s.<br/>%s' % (host, port, e)
logger.error(error)
return mfs_exceptions.MooseConnectionFailed(error)
else:
return version
def get_master_version(host, port):
try:
mfs = moose_lib.MooseFS(masterhost=host,
masterport=int(port))
version = mfs.masterversion
except Exception as e:
error = 'Failed to connect to %s:%s.<br/>%s' % (host, port, e)
logger.error(error)
return mfs_exceptions.MooseConnectionFailed(error)
else:
return version
def _sftp_connect(self):
"""
Helper method. It initialize sftp connection with remote host.
>>> obj._sftp_connect()
"""
try:
sftp = self.ssh.open_sftp()
except Exception as e:
msg = "Failed to open sftp session: %s" % str(e)
logger.error(e)
raise mfs_exceptions.MooseConnectionFailed(msg)
return sftp
def mfs_mounts(self):
clients = []
try:
s = self.bind_to_master()
self.mysend(s, struct.pack(">LLB", CLTOMA_SESSION_LIST, 1, 1))
header = self.myrecv(s, 8)
cmd, length = struct.unpack(">LL", header)
if cmd == MATOCL_SESSION_LIST and self.masterversion >= (1, 5, 14):
data = self.myrecv(s, length)
statscnt = struct.unpack(">H", data[0:2])[0]
pos = 2
while pos < length:
sessionid, ip1, ip2, ip3, ip4, v1, v2, v3, ileng = struct.unpack(
">LBBBBHBBL", data[pos:pos + 16])
ipnum = "%d.%d.%d.%d" % (ip1, ip2, ip3, ip4)
ver = "%d.%d.%d" % (v1, v2, v3)
pos += 16
info = data[pos:pos + ileng]
pos += ileng
pleng = struct.unpack(">L", data[pos:pos + 4])[0]
pos += 4
path = data[pos:pos + pleng]
pos += pleng
try:
host = (socket.gethostbyaddr(ipnum))[0]
except Exception:
host = "(unresolved)"
clients.append({
'host': host,
'ip': ipnum,
'mount_point': info,
'mfsmount_root': path
})
return clients
else:
msg = 'Error during clients list obtainig. Check master version, it could be obsolite'
logger.error(msg)
raise mfs_exceptions.MooseError(msg)
except Exception as e:
msg = 'Error during connect to master: %s' % str(e)
logger.error(msg)
raise mfs_exceptions.MooseConnectionFailed(msg)
finally:
s.close()
return clients
def _sftp_connect(self):
"""
Helper method. It initialize sftp connection with remote host.
>>> obj._sftp_connect()
"""
try:
sftp = self.ssh.open_sftp()
except Exception, e:
msg = "Failed to open sftp session: %s" % str(e)
logger.error(e)
raise errors.MooseConnectionFailed(msg)
def mfs_mounts(self):
clients = []
try:
s = self.bind_to_master()
self.mysend(s, struct.pack(">LLB", CLTOMA_SESSION_LIST, 1, 1))
header = self.myrecv(s, 8)
cmd, length = struct.unpack(">LL", header)
if cmd == MATOCL_SESSION_LIST and self.masterversion >= (1, 5, 14):
data = self.myrecv(s, length)
statscnt = struct.unpack(">H", data[0:2])[0]
pos = 2
while pos < length:
sessionid, ip1, ip2, ip3, ip4, v1, v2, v3, ileng = struct.unpack(">LBBBBHBBL", data[pos:pos+16])
ipnum = "%d.%d.%d.%d" % (ip1, ip2, ip3, ip4)
ver = "%d.%d.%d" % (v1, v2, v3)
pos += 16
info = data[pos:pos+ileng]
pos += ileng
pleng = struct.unpack(">L", data[pos:pos+4])[0]
pos += 4
path = data[pos:pos+pleng]
pos += pleng
try:
host = (socket.gethostbyaddr(ipnum))[0]
except Exception:
host = "(unresolved)"
clients.append( {
'host': host,
'ip': ipnum,
'mount_point': info,
'mfsmount_root': path
} )
return clients
else:
msg = 'Error during clients list obtainig. Check master version, it could be obsolite'
logger.error(msg)
raise mfs_exceptions.MooseError(msg)
except Exception as e:
msg = 'Error during connect to master: %s' % str(e)
logger.error(msg)
raise mfs_exceptions.MooseConnectionFailed(msg)
finally:
s.close()
return clients
def get_file(self, path, mode):
"""
Return file object related with remote file. Method takes path to the file and mode args.
>>> obj.get_file('/etc/mfs/mfshdd.cfg', 'w')
>>> obj.get_file('/etc/mfs/mfshdd.cfg', 'rb')
"""
try:
file_o = self.remote.file(path, mode)
except IOError, e:
msg = "Failed to open remote file: %s" % str(e)
logger.error(e)
raise errors.MooseConnectionFailed(msg)
def get_file(self, path, mode):
"""
Return file object related with remote file. Method takes path to the file and mode args.
>>> obj.get_file('/etc/mfs/mfshdd.cfg', 'w')
>>> obj.get_file('/etc/mfs/mfshdd.cfg', 'rb')
"""
try:
file_o = self.remote.file(path, mode)
except IOError as e:
msg = "Failed to open remote file: %s" % str(e)
logger.error(e)
raise mfs_exceptions.OpenRemoteFileFailed(msg)
return file_o
def _connect(self, ssh_client):
"""
Helper for connect method. According to __init__ arguments (auth type, login, pwd) return appropriate
ssh connection.
>>> obj._connect(ssh_client)
"""
try:
ssh_client.connect(self.host, username=self.user, key_filename=self.private_key_file)
except Exception as e:
msg = "\n".join(['ssh connection failed with the following error:\n%s' % str(e),
'CONNECTION DETAILS:',
'host: %s' % self.host,
'username: %s' % self.user,
'private key file: %s' % self.private_key_file])
logger.error(e)
raise mfs_exceptions.MooseConnectionFailed(msg)
return ssh_client
def _connect(self, ssh_client):
"""
Helper for connect method. According to __init__ arguments (auth type, login, pwd) return appropriate
ssh connection.
>>> obj._connect(ssh_client)
"""
try:
if self.remote_auth_type == 'pwd':
ssh_client.connect(self.host, username=self.user, password=self.password)
elif self.remote_auth_type == 'key':
if not self.remote_auth_passwd:
ssh_client.connect(self.host, username=self.user, key_filename=self.private_key_file)
elif self.remote_auth_type == 'key' and self.remote_auth_passwd:
ssh_client.connect(self.host, username=self.user, key_filename=self.private_key_file,
password=self.password)
except Exception, e:
msg = 'Error during ssh client connect: %s' % str(e)
logger.error(e)
raise errors.MooseConnectionFailed(msg)
def _connect(self, ssh_client):
"""
Helper for connect method. According to __init__ arguments (auth type, login, pwd) return appropriate
ssh connection.
>>> obj._connect(ssh_client)
"""
try:
ssh_client.connect(self.host,
username=self.user,
key_filename=self.private_key_file)
except Exception as e:
msg = "\n".join([
'ssh connection failed with the following error:\n%s' % str(e),
'CONNECTION DETAILS:',
'host: %s' % self.host,
'username: %s' % self.user,
'private key file: %s' % self.private_key_file
])
logger.error(e)
raise mfs_exceptions.MooseConnectionFailed(msg)
return ssh_client
def get_meta_info(meta_path, connection, configs_path):
"""
Gets DATA_PATH option from configs_path/mfsmaster.cfg file and tries
to get information about metafiles in DATA_PATH.
Adds errors if mfsmaster.cfg is missing or
DATA_PATH is not readable or not exists.
"""
errors = []
metafiles = []
if connection.path_exists(meta_path):
metafiles = connection.get_files_info(meta_path)
else:
msg = 'Metafiles path % s does not exist.' % meta_path
logger.error(mfs_exceptions.MetafilesException(msg))
errors.append(''.join([msg,
'<br/>Check \"meta_path\" option in \"%s\" or \"DATA_PATH\" option in %s.' % \
(DEFAULT_MFSTOOL_CONFIG_PATH, CONFIGS[0])]))
return {
'metafiles' : metafiles,
'errors' : errors,
}
def get_meta_info(meta_path, connection, configs_path):
"""
Gets DATA_PATH option from configs_path/mfsmaster.cfg file and tries
to get information about metafiles in DATA_PATH.
Adds errors if mfsmaster.cfg is missing or
DATA_PATH is not readable or not exists.
"""
errors = []
metafiles = []
if connection.path_exists(meta_path):
metafiles = connection.get_files_info(meta_path)
else:
msg = 'Metafiles path % s does not exist.' % meta_path
logger.error(mfs_exceptions.MetafilesException(msg))
errors.append(''.join([msg,
'<br/>Check \"meta_path\" option in \"%s\" or \"DATA_PATH\" option in %s.' % \
(DEFAULT_MFSTOOL_CONFIG_PATH, CONFIGS[0])]))
return {
'metafiles': metafiles,
'errors': errors,
}
def network_check(config_obj):
# Check whether app port is accessible
port = config_obj.get('general', 'port')
address = config_obj.get('general', 'host')
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
if port is None and address is None:
port = DEFAULT_APP_PORT
address = DEFAULT_APP_ADDRESS
result = s.connect_ex((DEFAULT_APP_ADDRESS, int(port)))
elif port is None and address is not None:
port = DEFAULT_APP_PORT
result = s.connect_ex((address, DEFAULT_APP_PORT))
else:
address = DEFAULT_APP_ADDRESS
result = s.connect_ex((DEFAULT_APP_ADDRESS, int(port)))
if result == 0:
s.close()
msg = '%s port is already used' % str(port)
logger.error(msg)
raise mfs_exceptions.PortUsageError(msg)
def mfs_servers(self):
# Return list of chunk servers
servers = []
try:
s = self.bind_to_master()
self.mysend(s, struct.pack(">LL", CLTOMA_CSERV_LIST, 0))
header = self.myrecv(s, 8)
cmd, length = struct.unpack(">LL", header)
if cmd == MATOCL_CSERV_LIST and self.masterversion >= (1, 5, 13) and (length % 54) == 0:
data = self.myrecv(s, length)
n = length/54
for i in xrange(n):
d = data[i*54:(i+1)*54]
disconnected,v1,v2,v3,ip1,ip2,ip3,ip4,port,used,total,chunks,tdused,tdtotal,tdchunks, \
errcnt = struct.unpack(">BBBBBBBBHQQLQQLL",d)
strip = "%u.%u.%u.%u" % (ip1,ip2,ip3,ip4)
try:
host = (socket.gethostbyaddr(strip))[0]
except Exception as e:
host = "(unresolved)"
msg = 'Error during server hostname getting %s' % str(e)
logger.error(msg)
servers.append({
'host': host,
'ip': strip,
'port': port
})
return servers
else:
msg = 'Error during servers list obtainig. Check master version, it could be obsolite'
logger.error(msg)
raise mfs_exceptions.MooseError(msg)
except Exception as e:
msg = 'Error during connect to master: %s' % str(e)
logger.error(msg)
raise mfs_exceptions.MooseConnectionFailed(msg)
finally:
s.close()
def directives_check(config_obj):
# Check whether
options = {'moose_options': 'master_host', 'ssh_options': 'key'}
for i in options:
if not config_obj.has_option(i, options.get(i)):
msg = '%s value is required for %s directive.' % (options.get(i), i)
logger.error(msg)
raise mfs_exceptions.ValueError(msg)
# Check whether ssh key exists
if not config_obj.get('ssh_options', 'key'):
msg = 'SSH key file is not specified.'
logger.error(msg)
raise mfs_exceptions.KeyFileMissing(msg)
elif not os.path.isfile(config_obj.get('ssh_options', 'key')):
msg = 'Specified SSH key file is absent'
logger.error(msg)
raise mfs_exceptions.InvalidKeyFile(msg)
def mfs_backup_servers(self):
# Return list of metaloggers servers
metaloggers = []
try:
s = self.bind_to_master()
self.mysend(s, struct.pack(">LL", 522, 0))
header = self.myrecv(s, 8)
cmd, length = struct.unpack(">LL", header)
if cmd == MATOCL_MLOG_LIST and (length % 8) == 0:
data = self.myrecv(s, length)
n = length / 8
for i in xrange(n):
d = data[i * 8:(i + 1) * 8]
v1, v2, v3, ip1, ip2, ip3, ip4 = struct.unpack(
">HBBBBBB", d)
ip = '.'.join([str(ip1), str(ip2), str(ip3), str(ip4)])
ver = '.'.join([str(v1), str(v2), str(v3)])
try:
host = (socket.gethostbyaddr("%u.%u.%u.%u" %
(ip1, ip2, ip3, ip4)))[0]
except Exception as e:
host = "(unresolved)"
msg = 'Error during server hostname getting %s' % str(
e)
logger.error(msg)
raise mfs_exceptions.MooseError(msg)
metaloggers.append({'host': host, 'ip': ip})
else:
msg = 'Error during metaloggers list obtainig. Check master version, it could be obsolite'
logger.error(msg)
raise mfs_exceptions.MooseError(msg)
except Exception as e:
msg = 'Error during connect to master: %s' % str(e)
logger.error(msg)
raise mfs_exceptions.MooseConnectionFailed(msg)
finally:
s.close()
return metaloggers
def mfs_servers(self):
# Return list of chunk servers
servers = []
try:
s = self.bind_to_master()
self.mysend(s, struct.pack(">LL", CLTOMA_CSERV_LIST, 0))
header = self.myrecv(s, 8)
cmd, length = struct.unpack(">LL", header)
if cmd == MATOCL_CSERV_LIST and self.masterversion >= (
1, 5, 13) and (length % 54) == 0:
data = self.myrecv(s, length)
n = length / 54
for i in xrange(n):
d = data[i * 54:(i + 1) * 54]
disconnected,v1,v2,v3,ip1,ip2,ip3,ip4,port,used,total,chunks,tdused,tdtotal,tdchunks, \
errcnt = struct.unpack(">BBBBBBBBHQQLQQLL",d)
strip = "%u.%u.%u.%u" % (ip1, ip2, ip3, ip4)
try:
host = (socket.gethostbyaddr(strip))[0]
except Exception as e:
host = "(unresolved)"
msg = 'Error during server hostname getting %s' % str(
e)
logger.error(msg)
servers.append({'host': host, 'ip': strip, 'port': port})
return servers
else:
msg = 'Error during servers list obtainig. Check master version, it could be obsolite'
logger.error(msg)
raise mfs_exceptions.MooseError(msg)
except Exception as e:
msg = 'Error during connect to master: %s' % str(e)
logger.error(msg)
raise mfs_exceptions.MooseConnectionFailed(msg)
finally:
s.close()
def get_configs_info(connection, files_list=CONFIGS.values()):
"""
Tries to get configs_path from moosefs_tool.ini.
Checks files from files_list in configs_path on remote host.
Adds config's errors if they are.
"""
errors = []
configs_path = ''
configs = []
try:
configs_path = moose_options.get('configs_path', DEFAULT_CONFIGS_PATH)
except Exception as e:
msg = 'Cannot get \"configs_path\".<br/>%s' % str(e)
logger.error(mfs_exceptions.ConfigsException(msg))
errors.append(msg)
else:
for file in files_list:
full_path = os.path.join(configs_path, file)
if connection.path_exists(full_path):
f = connection.get_file(full_path, 'r')
configs.append(file)
f.close()
else:
msg = '\"%s\" is missing in %s.' % (file, configs_path)
logger.error(mfs_exceptions.ConfigsException(msg))
errors.append(msg)
if not configs:
msg = 'You have no configs in %s.<br/>' % configs_path
logger.error(mfs_exceptions.ConfigsException(msg))
errors.append(''.join([msg,
'Please check \"configs_path\" option in %s' % \
DEFAULT_MFSTOOL_CONFIG_PATH]))
return {
'configs_path': configs_path,
'configs': configs,
'errors': errors,
}
def mfs_backup_servers(self):
# Return list of metaloggers servers
metaloggers = []
try:
s = self.bind_to_master()
self.mysend(s, struct.pack(">LL", 522, 0))
header = self.myrecv(s, 8)
cmd, length = struct.unpack(">LL", header)
if cmd == MATOCL_MLOG_LIST and (length % 8) == 0:
data = self.myrecv(s, length)
n = length/8
for i in xrange(n):
d = data[i*8:(i+1)*8]
v1, v2, v3, ip1, ip2, ip3, ip4 = struct.unpack(">HBBBBBB", d)
ip = '.'.join([str(ip1), str(ip2), str(ip3), str(ip4)])
ver = '.'.join([str(v1), str(v2), str(v3)])
try:
host = (socket.gethostbyaddr("%u.%u.%u.%u" % (ip1, ip2, ip3, ip4)))[0]
except Exception as e:
host = "(unresolved)"
msg = 'Error during server hostname getting %s' % str(e)
logger.error(msg)
raise mfs_exceptions.MooseError(msg)
metaloggers.append({ 'host': host,
'ip': ip
})
else:
msg = 'Error during metaloggers list obtainig. Check master version, it could be obsolite'
logger.error(msg)
raise mfs_exceptions.MooseError(msg)
except Exception as e:
msg = 'Error during connect to master: %s' % str(e)
logger.error(msg)
raise mfs_exceptions.MooseConnectionFailed(msg)
finally:
s.close()
return metaloggers
def get_meta_info(connection, errors, config_path):
"""
Gets DATA_PATH option from config_path/mfsmaster.cfg file and tries
to get information about metafiles in DATA_PATH.
Adds errors if mfsmaster.cfg is missing or
DATA_PATH is not readable or not exists.
"""
errors['metafiles'] = []
meta_path = ''
metafiles = []
mfsmaster_cfg_path = os.path.join(config_path, CONFIGS[0])
try:
mfsmaster_cfg = connection.get_file(mfsmaster_cfg_path, 'r')
data_line = ''.join([l for l in mfsmaster_cfg.readlines() \
if 'DATA_PATH' in l])
meta_path = re.split(' ?= ?', data_line)[1].strip()
if connection.path_exists(meta_path):
metafiles = connection.get_files_info(meta_path)
else:
msg = 'Metafiles path % s does not exist.' % meta_path
logger.error(mfs_exceptions.MetafilesException(msg))
errors['metafiles'].append(''.join([msg,
'<br/>Change DATA_PATH option in mfsmaster.cfg.']))
except mfs_exceptions.OpenRemoteFileFailed:
msg = 'Cannot find \"%s\" in %s.' % (CONFIGS[0], config_path)
logger.error(mfs_exceptions.MetafilesException(msg))
errors['metafiles'].append(msg)
except IndexError:
msg = 'Cannot read DATA_PATH option in %s.' % CONFIGS[0]
logger.error(mfs_exceptions.MetafilesException(msg))
errors['metafiles'].append(msg)
else:
mfsmaster_cfg.close()
return meta_path, metafiles, errors
def get_configs_info(connection, files_list=CONFIGS.values()):
"""
Tries to get configs_path from moosefs_tool.ini.
Checks files from files_list in configs_path on remote host.
Adds config's errors if they are.
"""
errors = []
configs_path = ''
configs = []
try:
configs_path = moose_options.get('configs_path', DEFAULT_CONFIGS_PATH)
except Exception as e:
msg = 'Cannot get \"configs_path\".<br/>%s' % str(e)
logger.error(mfs_exceptions.ConfigsException(msg))
errors.append(msg)
else:
for file in files_list:
full_path = os.path.join(configs_path, file)
if connection.path_exists(full_path):
f = connection.get_file(full_path, 'r')
configs.append(file)
f.close()
else:
msg = '\"%s\" is missing in %s.' % (file, configs_path)
logger.error(mfs_exceptions.ConfigsException(msg))
errors.append(msg)
if not configs:
msg = 'You have no configs in %s.<br/>' % configs_path
logger.error(mfs_exceptions.ConfigsException(msg))
errors.append(''.join([msg,
'Please check \"configs_path\" option in %s' % \
DEFAULT_MFSTOOL_CONFIG_PATH]))
return {
'configs_path' : configs_path,
'configs' : configs,
'errors' : errors,
}
def get_config_info(connection, errors, files_list=CONFIGS.values()):
"""
Tries to get config_path from moosefs_tool.ini.
Checks files from files_list in config_path on remote host.
Adds config's errors if they are.
"""
errors['configs'] = []
config_path = ''
configs = []
try:
config_path = roots['config_path']
except KeyError:
msg = 'Cannot get \"config_path\" option from moosefs_tool.ini'
logger.error(mfs_exceptions.ConfigsException(msg))
errors['configs'].append(''.join([msg,
'<br/>Please set \"config_path\" option',
'and restart application.']))
else:
for file in files_list:
full_path = os.path.join(config_path, file)
if connection.path_exists(full_path):
f = connection.get_file(full_path, 'r')
configs.append(file)
f.close()
else:
msg = '\"%s\" is missing in %s.' % (file, config_path)
logger.error(mfs_exceptions.ConfigsException(msg))
errors['configs'].append(msg)
if not configs:
msg = 'You have no configs in %s.<br/>' % config_path
logger.error(mfs_exceptions.ConfigsException(msg))
errors['configs'].append(''.join([msg,
'Please check \"config_path\" option in moosefs_tool.ini']))
return config_path, configs, errors
def sections_check(config_obj):
for i in ('moose_options', 'ssh_options'):
if not config_obj.has_section(i):
msg = '%s section is missing. This section is required' % str(i)
logger.error(msg)
raise mfs_exceptions.SectionMissing(msg)