def test(calculators=[], jobs=0,
stream=sys.stdout, files=None, verbose=False):
"""Main test-runner for ASE."""
if LooseVersion(np.__version__) >= '1.14':
# Our doctests need this (spacegroup.py)
np.set_printoptions(legacy='1.13')
test_calculator_names.extend(calculators)
disable_calculators([name for name in calc_names
if name not in calculators])
tests = get_tests(files)
if len(set(tests)) != len(tests):
# Since testsubdirs are based on test name, we will get race
# conditions on IO if the same test runs more than once.
print('Error: One or more tests specified multiple times',
file=sys.stderr)
sys.exit(1)
if jobs == -1: # -1 == auto
jobs = min(cpu_count(), len(tests), 32)
print_info()
origcwd = os.getcwd()
testdir = tempfile.mkdtemp(prefix='ase-test-')
os.chdir(testdir)
# Note: :25 corresponds to ase.cli indentation
print('{:25}{}'.format('test directory', testdir))
if test_calculator_names:
print('{:25}{}'.format('Enabled calculators:',
' '.join(test_calculator_names)))
print('{:25}{}'.format('number of processes',
jobs or '1 (multiprocessing disabled)'))
print('{:25}{}'.format('time', time.strftime('%c')))
print()
t1 = time.time()
results = []
try:
for result in runtests_parallel(jobs, tests, verbose):
results.append(result)
except KeyboardInterrupt:
print('Interrupted by keyboard')
return 1
else:
summary(results)
ntrouble = len([r for r in results if r.status in ['FAIL', 'ERROR']])
return ntrouble
finally:
t2 = time.time()
print('Time elapsed: {:.1f} s'.format(t2 - t1))
os.chdir(origcwd)
def test(verbosity=1,
calculators=[],
testdir=None,
stream=sys.stdout,
files=None):
test_calculator_names.extend(calculators)
disable_calculators(
[name for name in calc_names if name not in calculators])
tests = get_tests(files)
ts = unittest.TestSuite()
for test in tests:
ts.addTest(ScriptTestCase(filename=os.path.abspath(test)))
if verbosity > 0:
print_info()
sys.stdout = devnull
if verbosity == 0:
stream = devnull
ttr = unittest.TextTestRunner(verbosity=verbosity, stream=stream)
origcwd = os.getcwd()
if testdir is None:
testdir = tempfile.mkdtemp(prefix='ase-test-')
else:
if os.path.isdir(testdir):
shutil.rmtree(testdir) # clean before running tests!
os.mkdir(testdir)
os.chdir(testdir)
if verbosity:
print('test-dir ', testdir, '\n', file=sys.__stdout__)
try:
results = ttr.run(ts)
finally:
os.chdir(origcwd)
sys.stdout = sys.__stdout__
return results
def test(verbosity=1, calculators=[], stream=sys.stdout, files=None):
"""Main test-runner for ASE."""
if LooseVersion(np.__version__) >= '1.14':
# Our doctests need this (spacegroup.py)
np.set_printoptions(legacy='1.13')
test_calculator_names.extend(calculators)
disable_calculators(
[name for name in calc_names if name not in calculators])
tests = get_tests(files)
ts = unittest.TestSuite()
for test in tests:
ts.addTest(ScriptTestCase(filename=os.path.abspath(test)))
if verbosity > 0:
print_info()
sys.stdout = devnull
if verbosity == 0:
stream = devnull
ttr = unittest.TextTestRunner(verbosity=verbosity, stream=stream)
origcwd = os.getcwd()
testdir = tempfile.mkdtemp(prefix='ase-test-')
os.chdir(testdir)
if verbosity:
print('{:25}{}\n'.format('test-dir', testdir), file=sys.__stdout__)
try:
results = ttr.run(ts)
finally:
os.chdir(origcwd)
sys.stdout = sys.__stdout__
return results
def test(verbosity=1, calculators=[],
testdir=None, stream=sys.stdout, files=None):
test_calculator_names.extend(calculators)
disable_calculators([name for name in calc_names
if name not in calculators])
tests = get_tests(files)
ts = unittest.TestSuite()
for test in tests:
ts.addTest(ScriptTestCase(filename=os.path.abspath(test)))
if verbosity > 0:
print_info()
sys.stdout = devnull
if verbosity == 0:
stream = devnull
ttr = unittest.TextTestRunner(verbosity=verbosity, stream=stream)
origcwd = os.getcwd()
if testdir is None:
testdir = tempfile.mkdtemp(prefix='ase-test-')
else:
if os.path.isdir(testdir):
shutil.rmtree(testdir) # clean before running tests!
os.mkdir(testdir)
os.chdir(testdir)
if verbosity:
print('test-dir ', testdir, '\n', file=sys.__stdout__)
try:
results = ttr.run(ts)
finally:
os.chdir(origcwd)
sys.stdout = sys.__stdout__
return results
def run(args):
if args.calculators:
calculators = args.calculators.split(',')
# Hack: We use ASE_TEST_CALCULATORS to communicate to pytest
# (in conftest.py) which calculators we have enabled.
# This also provides an (undocumented) way to enable
# calculators when running pytest independently.
os.environ['ASE_TEST_CALCULATORS'] = ' '.join(calculators)
else:
calculators = []
print_info()
print()
if args.list_calculators:
for name in calc_names:
print(name)
sys.exit(0)
for calculator in calculators:
if calculator not in calc_names:
sys.stderr.write('No calculator named "{}".\n'
'Possible CALCULATORS are: '
'{}.\n'.format(calculator,
', '.join(calc_names)))
sys.exit(1)
if args.nogui:
os.environ.pop('DISPLAY')
pytest_args = ['--pyargs', '-v']
def add_args(*args):
pytest_args.extend(args)
if args.list:
add_args('--collect-only')
jobs = choose_how_many_workers(args.jobs)
if jobs:
add_args('--numprocesses={}'.format(jobs))
add_args('--dist=loadfile')
if args.fast:
add_args('-m', 'not slow')
if args.coverage:
# It won't find the .coveragerc unless we are in the right
# directory.
cwd = Path.cwd()
if testdir.parent.parent != cwd:
raise CLIError('Please run ase test --coverage in the ase '
'top directory')
coveragerc = testdir / '.coveragerc'
if not coveragerc.exists():
raise CLIError('No .coveragerc file. Maybe you are not '
'running the development version. Please '
'do so, or run coverage manually')
add_args('--cov=ase', '--cov-config={}'.format(coveragerc),
'--cov-report=term', '--cov-report=html')
if args.tests:
names, groups = all_test_modules_and_groups()
testnames = []
for arg in args.tests:
if arg in groups:
testnames += groups[arg]
else:
testnames.append(arg)
for testname in testnames:
add_args('ase.test.{}'.format(testname))
else:
add_args('ase.test')
if args.verbose:
add_args('--capture=no')
if args.pytest:
add_args(*args.pytest)
print()
calcstring = ','.join(calculators) if calculators else 'none'
print('Enabled calculators: {}'.format(calcstring))
print()
print('About to run pytest with these parameters:')
for line in pytest_args:
print(' ' + line)
if not have_module('pytest'):
raise CLIError(
'Cannot import pytest; please install pytest to run tests')
import pytest
exitcode = pytest.main(pytest_args)
sys.exit(exitcode)
def run(args):
if args.calculators:
calculators = args.calculators.split(',')
# Hack: We use ASE_TEST_CALCULATORS to communicate to pytest
# (in conftest.py) which calculators we have enabled.
# This also provides an (undocumented) way to enable
# calculators when running pytest independently.
os.environ['ASE_TEST_CALCULATORS'] = ' '.join(calculators)
else:
calculators = []
print_info()
print()
if args.list_calculators:
for name in calc_names:
print(name)
sys.exit(0)
for calculator in calculators:
if calculator not in calc_names:
sys.stderr.write('No calculator named "{}".\n'
'Possible CALCULATORS are: '
'{}.\n'.format(calculator,
', '.join(calc_names)))
sys.exit(1)
if args.nogui:
os.environ.pop('DISPLAY')
pytest_args = ['--pyargs', '-v']
def add_args(*args):
pytest_args.extend(args)
if args.list:
add_args('--collect-only')
jobs = choose_how_many_workers(args.jobs)
if jobs:
add_args('--numprocesses={}'.format(jobs))
if args.fast:
add_args('-m', 'not slow')
if args.coverage:
add_args('--cov=ase', '--cov-config=.coveragerc',
'--cov-report=term', '--cov-report=html')
if args.tests:
names, groups = all_test_modules_and_groups()
testnames = []
for arg in args.tests:
if arg in groups:
testnames += groups[arg]
else:
testnames.append(arg)
for testname in testnames:
add_args('ase.test.{}'.format(testname))
else:
add_args('ase.test')
if args.verbose:
add_args('--capture=no')
if args.pytest:
add_args(*args.pytest)
print()
calcstring = ','.join(calculators) if calculators else 'none'
print('Enabled calculators: {}'.format(calcstring))
print()
print('About to run pytest with these parameters:')
for line in pytest_args:
print(' ' + line)
if not have_module('pytest'):
raise CLIError('Cannot import pytest; please install pytest '
'to run tests')
# We run pytest through Popen rather than pytest.main().
#
# This is because some ASE modules were already imported and
# would interfere with code coverage measurement.
# (Flush so we don't get our stream mixed with the pytest output)
sys.stdout.flush()
proc = Popen([sys.executable, '-m', 'pytest'] + pytest_args,
cwd=str(testdir))
exitcode = proc.wait()
sys.exit(exitcode)
def run(args):
if args.calculators:
calculators = args.calculators.split(',')
# Hack: We use ASE_TEST_CALCULATORS to communicate to pytest
# (in conftest.py) which calculators we have enabled.
# This also provides an (undocumented) way to enable
# calculators when running pytest independently.
os.environ['ASE_TEST_CALCULATORS'] = ' '.join(calculators)
else:
calculators = []
print_info()
print()
if args.list_calculators:
for name in calc_names:
print(name)
sys.exit(0)
for calculator in calculators:
if calculator not in calc_names:
sys.stderr.write('No calculator named "{}".\n'
'Possible CALCULATORS are: '
'{}.\n'.format(calculator,
', '.join(calc_names)))
sys.exit(1)
if args.nogui:
os.environ.pop('DISPLAY')
pytest_args = ['--pyargs', '-v']
def add_args(*args):
pytest_args.extend(args)
if args.list:
add_args('--collect-only')
jobs = choose_how_many_workers(args.jobs)
if jobs:
add_args('--numprocesses={}'.format(jobs))
if args.tests:
from ase.test.newtestsuite import TestModule
dct = TestModule.all_test_modules_as_dict()
# Hack: Make it recognize groups of tests like fio/*.py
groups = {}
for name in dct:
groupname = name.split('.')[0]
if groupname not in dct:
groups.setdefault(groupname, []).append(name)
testnames = []
for arg in args.tests:
if arg in groups:
testnames += groups[arg]
else:
testnames.append(arg)
for testname in testnames:
mod = dct[testname]
if mod.is_pytest_style:
pytest_args.append(mod.module)
else:
# XXX Not totally logical
add_args('ase.test.test_modules::{}'.format(
mod.pytest_function_name))
else:
add_args('ase.test')
if args.verbose:
add_args('--capture=no')
if args.pytest:
add_args(*args.pytest)
print()
calcstring = ','.join(calculators) if calculators else 'none'
print('Enabled calculators: {}'.format(calcstring))
print()
print('About to run pytest with these parameters:')
for line in pytest_args:
print(' ' + line)
if not have_module('pytest'):
raise CLIError(
'Cannot import pytest; please install pytest to run tests')
import pytest
exitcode = pytest.main(pytest_args)
sys.exit(exitcode)
