from ase import Atoms, Atom
from jasp import *
atoms = Atoms([Atom('O', [5, 5, 5], magmom=1)], cell=(6, 6, 6))
with jasp(
'molecules/O_sv',
encut=300,
xc='PBE',
ispin=2,
ismear=0,
sigma=0.001,
setups={'O': '_sv'}, # specifies O_sv potential
atoms=atoms) as calc:
print 'Total energy = {0} eV'.format(atoms.get_potential_energy())
from ase import Atoms, Atom
from vasp import Vasp
import numpy as np
np.set_printoptions(precision=3, suppress=True)
atoms = Atoms([Atom('C', [0, 0, 0]),
Atom('O', [1.2, 0, 0])],
cell=(6, 6, 6))
atoms.center()
ENCUTS = [250, 300, 350, 400, 450, 500]
calcs = [Vasp('molecules/co-en-{0}'.format(en),
encut=en,
xc='PBE',
atoms=atoms)
for en in ENCUTS]
energies = [calc.potential_energy for calc in calcs]
print(energies)
calcs[0].stop_if(None in energies)
import matplotlib.pyplot as plt
plt.plot(ENCUTS, energies, 'bo-')
plt.xlabel('ENCUT (eV)')
plt.ylabel('Total energy (eV)')
plt.savefig('images/co-encut-v.png')
def calculate(element, h, vacuum, xc, magmom):
atom = Atoms([Atom(element, (0, 0, 0))])
if magmom > 0.0:
mms = [magmom for i in range(len(atom))]
atom.set_initial_magnetic_moments(mms)
atom.center(vacuum=vacuum)
mixer = MixerSum(beta=0.2)
if element == 'O':
mixer = MixerSum(nmaxold=1, weight=100)
atom.set_positions(atom.get_positions()+[0.0, 0.0, 0.0001])
calc_atom = GPAW(h=h, xc=data[element][xc][2],
eigensolver='rmm-diis',
occupations=FermiDirac(0.0, fixmagmom=True),
mixer=mixer,
nbands=-2,
txt='%s.%s.txt' % (element, xc))
atom.set_calculator(calc_atom)
mixer = Mixer(beta=0.2, weight=100)
compound = molecule(element+'2')
if compound == 'O2':
mixer = MixerSum(beta=0.2)
mms = [1.0 for i in range(len(compound))]
compound.set_initial_magnetic_moments(mms)
calc = GPAW(h=h, xc=data[element][xc][2],
eigensolver='rmm-diis',
mixer=mixer,
txt='%s2.%s.txt' % (element, xc))
compound.set_distance(0,1, data[element]['R_AA_B3LYP'])
compound.center(vacuum=vacuum)
compound.set_calculator(calc)
if data[element][xc][3] == 'hyb_gga': # only for hybrids
e_atom = atom.get_potential_energy()
e_compound = compound.get_potential_energy()
calc_atom.set(xc=xc)
calc.set(xc=xc)
if 0:
qn = QuasiNewton(compound)
qn.attach(Trajectory(
element+'2'+'_'+xc+'.traj', 'w', compound).write)
qn.run(fmax=0.02)
e_atom = atom.get_potential_energy()
e_compound = compound.get_potential_energy()
dHf_0 = (e_compound - 2 * e_atom + data[element]['ZPE_AA_B3LYP'] +
2 * data[element]['dHf_0_A'])
dHf_298 = (dHf_0 + data[element]['H_298_H_0_AA_B3LYP'] -
2 * data[element]['H_298_H_0_A']) * (mol / kcal)
dist_compound = compound.get_distance(0,1)
de = dHf_298-data[element][xc][1]
E[element][xc] = de
if rank == 0:
print((xc, h, vacuum, dHf_298, data[element][xc][1], de,
de/data[element][xc][1]))
if element == 'H':
equal(dHf_298, data[element][xc][1], 0.25, msg=xc+': ') # kcal/mol
elif element == 'O':
equal(dHf_298, data[element][xc][1], 7.5, msg=xc+': ') # kcal/mol
else:
equal(dHf_298, data[element][xc][1], 2.15, msg=xc+': ') # kcal/mol
equal(de, E_ref[element][xc], 0.06, msg=xc+': ') # kcal/mol
# run CuO calculation
from vasp import Vasp
from ase import Atom, Atoms
import numpy as np
# CuO
# http://cst-www.nrl.navy.mil/lattice/struk/b26.html
# http://www.springermaterials.com/docs/info/10681727_51.html
a = 4.6837
b = 3.4226
c = 5.1288
beta = 99.54/180*np.pi
y = 0.5819
a1 = np.array([0.5*a, -0.5*b, 0.0])
a2 = np.array([0.5*a, 0.5*b, 0.0])
a3 = np.array([c*np.cos(beta), 0.0, c*np.sin(beta)])
atoms = Atoms([Atom('Cu', 0.5*a2),
Atom('Cu', 0.5*a1 + 0.5*a3),
Atom('O', -y*a1 + y*a2 + 0.25*a3),
Atom('O', y*a1 - y*a2 - 0.25*a3)],
cell=(a1, a2, a3))
calc = Vasp('bulk/CuO',
encut=400,
kpts=[8, 8, 8],
ibrion=2,
isif=3,
nsw=30,
xc='PBE',
atoms=atoms)
print(atoms.get_potential_energy())
from ase import Atoms, Atom
from ase.calculators.lammpsrun import LAMMPS
a = [6.5, 6.5, 7.7]
d = 2.3608
NaCl = Atoms([Atom('Na', [0, 0, 0]), Atom('Cl', [0, 0, d])], cell=a, pbc=True)
calc = LAMMPS(tmp_dir='./', keep_tmp_files=True)
NaCl.set_calculator(calc)
print NaCl.get_stress()
for rot in [20, 200]:
new = org.copy()
new.translate(-new.get_center_of_mass())
new.rotate(rot, axis)
dist = distance(org, new, True)
dist2 = distance(org, new, False)
print('rotation', axis, ', angle', rot, '-> distance', dist)
assert dist < maxdist
assert dist == dist2
if 0:
# reflect
new = Atoms()
cm = org.get_center_of_mass()
for a in org:
new.append(Atom(a.symbol, -(a.position - cm)))
dist = distance(org, new)
print('reflected -> distance', dist)
# permute
for i, a in enumerate(org):
if i < 3:
a.symbol = 'H'
for indxs in itertools.permutations(range(3)):
new = org.copy()
for c in range(3):
new[c].position = org[indxs[c]].position
dist = distance(org, new)
print('permutation', indxs, '-> distance', dist)
assert dist < maxdist
from ase import Atom, Atoms
from gpaw import GPAW
from gpaw.test import equal
a = 4.05
d = a / 2**0.5
bulk = Atoms([Atom('Al', (0, 0, 0)), Atom('Al', (0.5, 0.5, 0.5))], pbc=True)
bulk.set_cell((d, d, a), scale_atoms=True)
h = 0.25
calc = GPAW(h=h,
nbands=2 * 8,
kpts=(2, 2, 2),
convergence={
'eigenstates': 1e-10,
'energy': 1e-5
})
bulk.set_calculator(calc)
e0 = bulk.get_potential_energy()
niter0 = calc.get_number_of_iterations()
calc = GPAW(h=h,
nbands=2 * 8,
kpts=(2, 2, 2),
convergence={
'eigenstates': 1e-10,
'energy': 1e-5,
'bands': 5
},
eigensolver='dav')
bulk.set_calculator(calc)
e1 = bulk.get_potential_energy()
niter1 = calc.get_number_of_iterations()
from ase import Atom, Atoms
m = Atoms('H2')
a = m[0]
b = Atom('H')
for c in [a, b]:
assert c.x == 0
c.z = 24.0
assert c.position[2] == 24.0
assert c.symbol == 'H'
c.number = 92
assert c.symbol == 'U'
c.symbol = 'Fe'
assert c.number == 26
c.tag = 42
assert c.tag == 42
c.momentum = (1, 2, 3)
assert m[0].tag == 42
momenta = m.get_momenta()
m = Atoms('LiH')
for a in m:
print a.symbol
for a in m:
if a.symbol == 'H':
a.z = 0.75
assert m.get_distance(0, 1) == 0.75
a = m.pop()
m += a
del m[:1]
print m
from gpaw import GPAW
from gpaw.lrtddft.kssingle import KSSingles
from gpaw.analyse.overlap import Overlap
from gpaw.test import equal
txt = '-'
txt = None
load = True
load = False
xc = 'LDA'
R = 0.7 # approx. experimental bond length
a = 4.0
c = 5.0
H2 = Atoms([
Atom('H', (a / 2, a / 2, (c - R) / 2)),
Atom('H', (a / 2, a / 2, (c + R) / 2))
],
cell=(a, a, c))
calc = GPAW(xc=xc, nbands=3, spinpol=False, eigensolver='rmm-diis', txt=txt)
H2.set_calculator(calc)
H2.get_potential_energy()
gsname = exname = 'rraman'
exkwargs = {'eps': 0.0, 'jend': 1}
pz = ResonantRaman(H2,
KSSingles,
gsname=gsname,
exname=exname,
exkwargs=exkwargs,
import numpy as np
from ase import Atom, Atoms
from ase.units import Hartree
from gpaw.mpi import size
from gpaw import GPAW
from gpaw.response.bse import BSE
GS = 1
bse = 1
casida = 1
compare = 1
if GS:
d = 2.89
cluster = Atoms([Atom('Na', (0, 0, 0)),
Atom('Na', (0, 0, d)),
], pbc=True)
cluster.set_cell((15.,15.,18.), scale_atoms=False)
cluster.center()
calc=GPAW(h=0.3,nbands=8)
cluster.set_calculator(calc)
cluster.get_potential_energy()
calc.write('Na2.gpw','all')
if bse:
bse = BSE('Na2.gpw',w=np.linspace(0,15,151),
q=np.array([0,0,0.0001]),optical_limit=True,ecut=50.,
from jasp import *
from ase import Atom, Atoms
atoms = Atoms([Atom('O', [4, 4.5, 5], magmom=2)], cell=(8, 9, 10))
with jasp('molecules/O-sp-triplet-lowsym-sv',
xc='PBE',
ismear=0,
ispin=2,
sigma=0.01,
setups={'O': '_sv'},
atoms=atoms) as calc:
try:
E_O = atoms.get_potential_energy()
except (VaspSubmitted, VaspQueued):
E_O = None
print('Magnetic moment on O = {0} Bohr'
' magnetons'.format(atoms.get_magnetic_moment()))
# now relaxed O2 dimer
atoms = Atoms(
[Atom('O', [5, 5, 5], magmom=1),
Atom('O', [6.22, 5, 5], magmom=1)],
cell=(10, 10, 10))
with jasp(
'molecules/O2-sp-triplet-sv',
xc='PBE',
ismear=0,
sigma=0.01,
ispin=2, # turn spin-polarization on
ibrion=2, # make sure we relax the geometry
nsw=10,
setups={'O': '_sv'},
atoms=atoms) as calc:
def read_vasp_out(filename='OUTCAR', index=-1, force_consistent=False):
"""Import OUTCAR type file.
Reads unitcell, atom positions, energies, and forces from the OUTCAR file
and attempts to read constraints (if any) from CONTCAR/POSCAR, if present.
"""
import numpy as np
from ase.calculators.singlepoint import SinglePointCalculator
from ase import Atoms, Atom
try: # try to read constraints, first from CONTCAR, then from POSCAR
constr = read_vasp('CONTCAR').constraints
except Exception:
try:
constr = read_vasp('POSCAR').constraints
except Exception:
constr = None
if isinstance(filename, basestring):
f = open(filename)
else: # Assume it's a file-like object
f = filename
data = f.readlines()
natoms = 0
images = []
atoms = Atoms(pbc=True, constraint=constr)
energy = 0
species = []
species_num = []
stress = None
symbols = []
ecount = 0
poscount = 0
magnetization = []
magmom = None
for n, line in enumerate(data):
if re.search('[0-9]-[0-9]', line):
data[n] = re.sub('([0-9])-([0-9])', r'\1 -\2', line)
for n, line in enumerate(data):
if 'POTCAR:' in line:
temp = line.split()[2]
for c in ['.', '_', '1']:
if c in temp:
temp = temp[0:temp.find(c)]
species += [temp]
if 'ions per type' in line:
species = species[:len(species) // 2]
temp = line.split()
ntypes = min(len(temp) - 4, len(species))
for ispecies in range(ntypes):
species_num += [int(temp[ispecies + 4])]
natoms += species_num[-1]
for iatom in range(species_num[-1]):
symbols += [species[ispecies]]
if 'direct lattice vectors' in line:
cell = []
for i in range(3):
temp = data[n + 1 + i].split()
cell += [[float(temp[0]), float(temp[1]), float(temp[2])]]
atoms.set_cell(cell)
if 'Free energy of the ion-electron system (eV)' in line:
e_alpha_z = float(data[n + 2].split()[4])
e_ewald = float(data[n + 3].split()[4])
e_hartree = float(data[n + 4].split()[4])
e_exchange = float(data[n + 5].split()[3])
e_vxc_exc = float(data[n + 6].split()[3])
e_paw_double1, e_paw_double2 = map(float, data[n + 7].split()[4:6])
e_t_s = float(data[n + 8].split()[4])
e_eigen = float(data[n + 9].split()[3])
e_atomic = float(data[n + 10].split()[4])
e_solv = float(data[n + 11].split()[3])
if 'Edisp (eV)' in line:
e_vdw = float(data[n].split()[2])
if 'FREE ENERGIE OF THE ION-ELECTRON SYSTEM' in line:
# choose between energy wigh smearing extrapolated to zero
# or free energy (latter is consistent with forces)
energy_zero = float(data[n + 4].split()[6])
energy_free = float(data[n + 2].split()[4])
energy = energy_zero
if force_consistent:
energy = energy_free
if ecount < poscount:
# reset energy for LAST set of atoms, not current one -
# VASP 5.11? and up
images[-1].calc.results['e_alpha_z'] = e_alpha_z
images[-1].calc.results['e_ewald'] = e_ewald
images[-1].calc.results['e_hartree'] = e_hartree
images[-1].calc.results['e_exchange'] = e_exchange
images[-1].calc.results['e_vxc_exc'] = e_vxc_exc
images[-1].calc.results['e_paw_double1'] = e_paw_double1
images[-1].calc.results['e_paw_double2'] = e_paw_double2
images[-1].calc.results['e_t_s'] = e_t_s
images[-1].calc.results['e_eigen'] = e_eigen
images[-1].calc.results['e_atomic'] = e_atomic
images[-1].calc.results['e_solv'] = e_solv
images[-1].calc.results['e_vdw'] = e_vdw
images[-1].calc.results['energy'] = energy
images[-1].calc.set(energy=energy)
ecount += 1
if 'magnetization (x)' in line:
magnetization = []
for i in range(natoms):
magnetization += [float(data[n + 4 + i].split()[4])]
if 'number of electron' in line:
parts = line.split()
if len(parts) > 5 and parts[0].strip() != "NELECT":
magmom = float(parts[5])
if 'in kB ' in line:
stress = -np.array([float(a) for a in line.split()[2:]])
stress = stress[[0, 1, 2, 4, 5, 3]] * 1e-1 * ase.units.GPa
if 'POSITION ' in line:
forces = []
positions = []
for iatom in range(natoms):
temp = data[n + 2 + iatom].split()
atoms += Atom(symbols[iatom],
[float(temp[0]),
float(temp[1]),
float(temp[2])])
forces += [[float(temp[3]), float(temp[4]), float(temp[5])]]
positions += [[float(temp[0]), float(temp[1]), float(temp[2])]]
atoms.set_calculator(
SinglePointCalculator(atoms,
energy=energy,
forces=forces,
stress=stress))
images += [atoms]
if len(magnetization) > 0:
mag = np.array(magnetization, float)
images[-1].calc.magmoms = mag
images[-1].calc.results['magmoms'] = mag
if magmom:
images[-1].calc.results['magmom'] = magmom
atoms = Atoms(pbc=True, constraint=constr)
poscount += 1
# return requested images, code borrowed from ase/io/trajectory.py
if isinstance(index, int):
return images[index]
else:
step = index.step or 1
if step > 0:
start = index.start or 0
if start < 0:
start += len(images)
stop = index.stop or len(images)
if stop < 0:
stop += len(images)
else:
if index.start is None:
start = len(images) - 1
else:
start = index.start
if start < 0:
start += len(images)
if index.stop is None:
stop = -1
else:
stop = index.stop
if stop < 0:
stop += len(images)
return [images[i] for i in range(start, stop, step)]
def find_defects(solid,
bulko,
rcutoff,
atomlistcheck=False,
trackvacs=False,
trackswaps=False,
debug=False,
dcheck=0.6):
"""Function to find interstitials, vacancies, and substitutional atoms (swaps) in a defected structure.
Identifies species by comparison to perfect structure.
Inputs:
solid = ASE atoms class for defected structure
bulko = ASE atoms class for perfect structure
rcutoff = float value of distance to surrounding atoms to include
atomlistcheck = False/list of atom types and concentrations according to atomlist format
trackvacs = True/False whether or not to identify vacancies in defect
trackswaps = True/False whether or not to identify substitutional defects
debug = False/file object to write debug structures"""
# Combine perfect and defect structures together
b = bulko.copy()
b.extend(solid)
b.set_pbc(True)
#Debug: Write solid and bulko to file
if debug:
print len(bulko)
write_xyz(debug, b, 'Find Ints: Solid and Bulko')
# Identify nearest neighbor atoms for each atom in perfect structure
ntot = len(bulko)
ctoff1 = [1.2 for one in b]
nl = NeighborList(ctoff1, bothways=True, self_interaction=False)
nl.update(b)
slist = []
blist = []
wlist = []
#Loop over each atom in perfect structure
for one in range(ntot):
indices, offsets = nl.get_neighbors(one)
for index, d in zip(indices, offsets):
index = int(index)
if index >= ntot:
pos = b[index].position + numpy.dot(d, bulko.get_cell())
natm1 = Atom(position=pos)
dist, dx, dy, dz = calc_dist(b[one], natm1)
if dist <= dcheck:
#Assume atoms closer than 0.6 Angstroms to be equivalent
slist.append(index - ntot)
blist.append(one)
if b[one].symbol == b[index].symbol:
wlist.append(index - ntot)
#Identify those atoms corresponding to interstitials, vacancies, and substitutions
oslist = [atm.index for atm in solid if atm.index not in slist]
vlist = [atm.index for atm in bulko if atm.index not in blist]
swlist = [
atm.index for atm in solid
if atm.index not in wlist and atm.index not in oslist
]
# Create Atoms objects for each identified defect
ntot = len(solid)
cluster = Atoms()
for one in oslist:
cluster.append(solid[one])
vacant = Atoms()
if trackvacs == True:
for one in vlist:
vacant.append(
Atom(symbol=bulko[one].symbol, position=bulko[one].position))
solid.append(Atom(symbol='X', position=bulko[one].position))
oslist.append(len(solid) - 1)
stro = 'Cluster Identified with length = {0}\nIdentified {1} vacancies\n'.format(
len(cluster), len(vlist))
swaps = Atoms()
if trackswaps == True:
for one in swlist:
swaps.append(solid[one])
oslist.append(one)
stro = 'Cluster Identified with length = {0}\nIdentified {1} swaps\n'.format(
len(cluster), len(swlist))
else:
stro = 'Cluster Identified with length = {0}\n'.format(len(cluster))
#Debug: write cluster to file
if debug:
b = cluster.copy()
write_xyz(debug, b, 'Find Ints: Cluster')
debug.flush()
print 'Found cluster size = ', len(b)
# Identify atoms surrounding the identified defects in the defected structure
box = Atoms()
bulki = Atoms()
if rcutoff != 0:
if rcutoff > 2.0:
cutoffs = [rcutoff for one in solid]
else:
cutoffs = [2.0 for one in solid]
solid.set_pbc(True)
nl = NeighborList(cutoffs, bothways=True, self_interaction=False)
nl.update(solid)
nbatmsd = []
repinds = []
for one in oslist:
if one not in repinds:
if one < ntot:
nbatmsd.append((0, one))
repinds.append(one)
for one in oslist:
indices, offsets = nl.get_neighbors(one)
for index, d in zip(indices, offsets):
index = int(index)
if index not in repinds and index < ntot:
opos = copy.copy(solid[index].position)
solid[index].position = solid[index].position + numpy.dot(
d, solid.get_cell())
dist = solid.get_distance(one, index)
solid[index].position = opos
if dist <= rcutoff:
nbatmsd.append((dist, index))
repinds.append(index)
else:
nbatmsd = []
repinds = []
for one in oslist:
if one not in repinds:
if one < ntot:
nbatmsd.append((0, one))
repinds.append(one)
nbatmsd = sorted(nbatmsd, key=lambda one: one[0], reverse=True)
indices = []
natomsbox = 0
# Select only atoms closest to defects that satisfy concentrations specified by atomlist given in atomlistcheck
if atomlistcheck:
for sym, c, m, u in atomlistcheck:
i = 0
nbsym = [one for one in nbatmsd if solid[one[1]].symbol == sym]
if len(nbsym) > c:
while i < c:
a = nbsym.pop()
box.append(solid[a[1]])
indices.append(a[1])
i += 1
else:
for a in nbsym:
box.append(solid[a[1]])
indices.append(a[1])
i += 1
if len(box) - natomsbox < c:
try:
while True:
for n in range(len(nbatmsd) - 1, -1, -1):
inds, offsets = nl.get_neighbors(nbatmsd[n][1])
for one, d in zip(inds, offsets):
if len(box) - natomsbox < c:
if one not in indices and one < ntot and solid[
one].symbol == sym:
opos = copy.copy(
solid[one].position)
solid[one].position = solid[
one].position + numpy.dot(
d, solid.get_cell())
dist = solid.get_distance(
nbatmsd[n][1], one)
solid[one].position = opos
if dist <= rcutoff * 5.0:
box.append(solid[one])
indices.append(one)
else:
raise StopIteration()
for one, d in zip(inds, offsets):
if len(box) - natomsbox < c:
if one not in indices and one < ntot and solid[
one].symbol == sym:
opos = copy.copy(
solid[one].position)
solid[one].position = solid[
one].position + numpy.dot(
d, solid.get_cell())
dist = solid.get_distance(
nbatmsd[n][1], one)
solid[one].position = opos
box.append(solid[one])
indices.append(one)
else:
raise StopIteration()
except StopIteration:
pass
natomsbox = len(box)
#Double check for sanity
for sym, c, m, u in atomlistcheck:
symsbox = [one for one in box if one.symbol == sym]
if len(symsbox) != c:
stro += 'WARNING!!!! : FAILURE IN FIND_DEFECTS TO MATCH PROVIDED ATOMLIST. DEBUG!!!!\n'
# If atomlistcheck is False then use all the atoms in the given cutoff distance
else:
for a in nbatmsd:
box.append(solid[a[1]])
indices.append(a[1])
# Add remaining atoms in defect to defected bulk atoms object
for one in range(len(solid)):
if one not in indices and one < ntot:
bulki.append(solid[one])
#Check for accidental vacancy admissions
#checklist=[atm for atm in box if atm.symbol=='X']
#checklist.extend([atm for atm in bulki if atm.symbol=='X'])
#Set up new individual
indiv = box.copy()
bulki.set_cell(bulko.get_cell())
indiv.set_cell(bulko.get_cell())
bulki.set_pbc(True)
indiv.set_pbc(True)
stro += 'Atomlist check = {0}\n'.format(atomlistcheck)
stro += 'Bulko = {0}\n'.format(bulko)
stro += 'New individual ({0} atoms) : {1}\n'.format(len(indiv), indiv)
stro += 'New bulki ({0} atoms) : {1}\n'.format(len(bulki), bulki)
#Debug: write new indiv to file
if debug:
b = indiv.copy()
write_xyz(debug, b, 'Find Ints: New Individual')
#Debug: write new bulki to file
b = bulki.copy()
write_xyz(debug, b, 'Find Ints: New Bulki')
debug.flush()
print len(bulko)
return indiv, bulki, vacant, swaps, stro
def set_position(self, position):
Atom.set(self, 'position', position)
self._mark()
def do_lattice(latt_name):
if latt_name == "cubic":
print("--------------------")
print("Simple cubic lattice")
print("--------------------")
atoms = Atoms( [Atom('H', (0.0, 0.0, 0.0))], pbc=True )
LatVecs = gen_lattice_sc(5.0)
atoms.set_cell( LatVecs )
atoms.write("H_sc.xsf")
elif latt_name == "fcc":
print("-----------")
print("FCC lattice")
print("-----------")
atoms = Atoms( [Atom('H', (0.0, 0.0, 0.0))], pbc=True )
LatVecs = gen_lattice_fcc(5.0)
atoms.set_cell( LatVecs )
atoms.write("H_fcc.xsf")
elif latt_name == "bcc":
print("-----------")
print("BCC lattice")
print("-----------")
atoms = Atoms( [Atom('H', (0.0, 0.0, 0.0))], pbc=True )
LatVecs = gen_lattice_bcc(5.0)
atoms.set_cell( LatVecs )
atoms.write("H_bcc.xsf")
elif latt_name == "hexagonal":
print("-----------------")
print("Hexagonal lattice")
print("-----------------")
atoms = Atoms( [Atom('H', (0.0, 0.0, 0.0))], pbc=True )
LatVecs = gen_lattice_hexagonal(5.0, 8.0)
atoms.set_cell( LatVecs )
atoms.write("H_hexagonal.xsf")
elif latt_name == "tetragonal":
print("------------------")
print("Tetragonal lattice")
print("------------------")
atoms = Atoms( [Atom("H", (0.0, 0.0, 0.0))], pbc=True )
LatVecs = gen_lattice_tetragonal_P(5.0, 6.0)
atoms.set_cell( LatVecs )
atoms.write("H_tetragonal.xsf")
elif latt_name == "orthorhombic":
print("--------------------")
print("Orthorhombic lattice")
print("--------------------")
atoms = Atoms( [Atom('H', (0.0, 0.0, 0.0))], pbc=True )
LatVecs = gen_lattice_orthorhombic(5.0, 8.0, 6.0)
atoms.set_cell( LatVecs )
atoms.write("H_orthorhombic.xsf")
elif latt_name == "rhombohedral type 1":
print("-----------------------------")
print("Rhombohedral lattice (type 1)")
print("-----------------------------")
atoms = Atoms( [Atom("H", (0.0, 0.0, 0.0))], pbc=True )
LatVecs = gen_lattice_rhombohedral(5.0, 80.0) # gamma < 90 degree
atoms.set_cell( LatVecs )
#
atoms.write("H_rhombohedral.xsf")
#
elif latt_name == "monoclinic":
print("------------------")
print("Monoclinic lattice")
print("------------------")
atoms = Atoms( [Atom("H", (0.0, 0.0, 0.0))], pbc=True )
LatVecs = gen_lattice_monoclinic(5.0, 8.0, 6.0, 80.0)
atoms.set_cell( LatVecs )
atoms.write("H_monoclinic.xsf")
else:
raise RuntimeError("Unknown lattice name:", lattice)
KPT, X, XKPT, PATH_STR, KPT_SPEC = gen_kpath(
atoms,lattice=latt_name )
#
Nsegment = len(PATH_STR)
print("Nsegment = ", Nsegment)
#
for isegment in range(Nsegment):
#
x = X[isegment]
kpt = KPT[isegment]
path_str = PATH_STR[isegment]
kpt_spec = KPT_SPEC[isegment]
#
Nkpt = len(x)
print(Nkpt)
for ik in range(Nkpt):
sys.stdout.write("%18.10f %18.10f %18.10f: %18.10f\n" % (kpt[ik,0],kpt[ik,1],kpt[ik,2],x[ik]))
#
kpt_spec = np.array(kpt_spec)
Nkpt_spec = len(path_str)
print(Nkpt_spec)
for ik in range(Nkpt_spec):
sys.stdout.write("%18.10f %18.10f %18.10f %s\n" %
(kpt_spec[ik,0], kpt_spec[ik,1], kpt_spec[ik,2], path_str[ik]))
from jasp import *
from ase import Atom, Atoms
# fcc
LC = [3.5, 3.55, 3.6, 3.65, 3.7, 3.75]
volumes, energies = [], []
for a in LC:
atoms = Atoms(
[Atom('Ni', (0, 0, 0), magmom=2.5)],
cell=0.5 * a *
np.array([[1.0, 1.0, 0.0], [0.0, 1.0, 1.0], [1.0, 0.0, 1.0]]))
with jasp('bulk/Ni-{0}'.format(a),
xc='PBE',
encut=350,
kpts=(12, 12, 12),
ispin=2,
atoms=atoms) as calc:
try:
e = atoms.get_potential_energy()
energies.append(e)
volumes.append(atoms.get_volume())
except:
pass
if len(energies) != len(LC):
import sys
sys.exit()
import matplotlib.pyplot as plt
plt.plot(LC, fcc_energies)
plt.xlabel('Lattice constant ($\AA$)')
plt.ylabel('Total energy (eV)')
plt.savefig('images/Ni-fcc.png')
def take_cluster(old_conf_name, type_map, idx, jdata):
cutoff = jdata['cluster_cutoff']
cutoff_hard = jdata.get('cluster_cutoff_hard', None)
sys = dpdata.System(old_conf_name, fmt = 'lammps/dump', type_map = type_map)
atom_names = sys['atom_names']
atom_types = sys['atom_types']
cell = sys['cells'][0]
coords = sys['coords'][0]
symbols = [atom_names[atom_type] for atom_type in atom_types]
# detect fragment
frag_numb, frag_index, graph = _crd2frag(symbols, coords, True, cell, return_bonds=True)
# get_distances
all_atoms = Atoms(symbols = symbols, positions = coords, pbc=True, cell=cell)
all_atoms[idx].tag = 1
distances = all_atoms.get_distances(idx, range(len(all_atoms)), mic=True)
distancescutoff = distances < cutoff
cutoff_atoms_idx = np.where(distancescutoff)[0]
if cutoff_hard is not None:
distancescutoff_hard = distances < cutoff_hard
cutoff_atoms_idx_hard = np.where(distancescutoff_hard)[0]
# make cutoff atoms in molecules
taken_atoms_idx = []
added = []
for ii in range(frag_numb):
frag_atoms_idx = np.where(frag_index == ii)[0]
if cutoff_hard is not None:
# drop atoms out of the hard cutoff anyway
frag_atoms_idx = np.intersect1d(frag_atoms_idx, cutoff_atoms_idx_hard)
if np.any(np.isin(frag_atoms_idx, cutoff_atoms_idx)):
if 'cluster_minify' in jdata and jdata['cluster_minify']:
# support for organic species
take_frag_idx=[]
for aa in frag_atoms_idx:
if np.any(np.isin(aa, cutoff_atoms_idx)):
# atom is in the soft cutoff
# pick up anyway
take_frag_idx.append(aa)
elif np.count_nonzero(np.logical_and(distancescutoff, graph.toarray()[aa]==1)):
# atom is between the hard cutoff and the soft cutoff
# and has a single bond with the atom inside
if all_atoms[aa].symbol == 'H':
# for atom H: just add it
take_frag_idx.append(aa)
else:
# for other atoms (C, O, etc.): replace it with a ghost H atom
near_atom_idx = np.nonzero(np.logical_and(distancescutoff, graph.toarray()[aa]>0))[0][0]
vector = all_atoms[aa].position - all_atoms[near_atom_idx].position
new_position = all_atoms[near_atom_idx].position + vector / np.linalg.norm(vector) * 1.09
added.append(Atom('H', new_position))
elif np.count_nonzero(np.logical_and(distancescutoff, graph.toarray()[aa]>1)):
# if that atom has a double bond with the atom inside
# just pick up the whole fragment (within the hard cutoff)
# TODO: use a more fantastic method
take_frag_idx=frag_atoms_idx
break
else:
take_frag_idx = frag_atoms_idx
taken_atoms_idx.append(take_frag_idx)
all_taken_atoms_idx = np.concatenate(taken_atoms_idx)
# wrap
cutoff_atoms = sum(added, all_atoms[all_taken_atoms_idx])
cutoff_atoms.wrap(
center=coords[idx] /
cutoff_atoms.get_cell_lengths_and_angles()[0: 3],
pbc=True)
coords = cutoff_atoms.get_positions()
sys.data['coords'] = np.array([coords])
sys.data['atom_types'] = np.array(list(atom_types[all_taken_atoms_idx]) + [atom_names.index('H')]*len(added))
sys.data['atom_pref'] = np.array([cutoff_atoms.get_tags()])
for ii, _ in enumerate(atom_names):
sys.data['atom_numbs'][ii] = np.count_nonzero(sys.data['atom_types']==ii)
return sys
def _branch_molecule(self, molecule, molecules):
"""Construct all the molecules one atom larger from a given
molecule and add the unique ones to a dictionary.
Parameters:
-----------
molecule : Gratoms object
Molecule to create branching structures from.
molecules : dict
Molecule structures to check for unique matches against.
Returns:
--------
new_molecules : list
All unique molecules discovered while branching.
molecules : dict
Molecule structures to check for unique matches updated with
new_molecules.
"""
new_molecules = []
nodes = molecule.nodes
counter = np.bincount(molecule.get_atomic_numbers(),
minlength=len(self.base_valence))
for base_node in nodes:
# Check if an additional bond can be formed
valence = nodes[base_node]['valence']
base_el = molecule.nodes[base_node]['number']
# Creating new nodes
for el, cnt in enumerate(self.element_pool):
# Skip elements exceeding specified limit
if counter[el] >= cnt:
continue
if valence <= 0:
continue
# Don't form new bonds if the users rules prohibit
if self.nbond_limits[base_el, el] == 0:
continue
G = molecule.copy()
node_index = len(G)
G.nodes[base_node]['valence'] -= 1
G += Atom(el)
G.nodes[node_index]['valence'] = self.base_valence[el] - 1
G.graph.add_edge(base_node, node_index, bonds=1)
comp_tag, bond_tag = G.get_chemical_tags()
isomorph_found = False
if comp_tag not in molecules:
molecules[comp_tag] = {}
if bond_tag not in molecules[comp_tag]:
molecules[comp_tag][bond_tag] = []
else:
for G1 in molecules[comp_tag][bond_tag]:
if G.is_isomorph(G1):
isomorph_found = True
break
if not isomorph_found:
new_molecules += [G]
molecules[comp_tag][bond_tag] += [G]
# Bonds to existing nodes
if self.multiple_bond_search:
for existing_node in nodes:
if valence <= 0:
continue
# Atoms don't bond to themselves
if existing_node == base_node:
continue
valence_new = nodes[existing_node]['valence']
el = molecule.nodes[existing_node]['number']
if valence_new <= 0:
continue
if self._maximum_bond_limit(molecule, base_node,
existing_node):
continue
G = molecule.copy()
G.nodes[base_node]['valence'] -= 1
G.nodes[existing_node]['valence'] -= 1
if G.graph.has_edge(base_node, existing_node):
G.graph[base_node][existing_node]['bonds'] += 1
else:
G.graph.add_edge(base_node, existing_node, bonds=1)
comp_tag, bond_tag = G.get_chemical_tags()
isomorph_found = False
if comp_tag not in molecules:
molecules[comp_tag] = {}
if bond_tag not in molecules[comp_tag]:
molecules[comp_tag][bond_tag] = []
else:
for G1 in molecules[comp_tag][bond_tag]:
if G.is_isomorph(G1):
isomorph_found = True
break
if not isomorph_found:
new_molecules += [G]
molecules[comp_tag][bond_tag] += [G]
return new_molecules, molecules
from ase import Atom, Atoms
import numpy as np
a = 3.61 # lattice constant
atoms = Atoms([Atom('Cu', [0, 0, 0])],
cell=0.5 * a *
np.array([[1.0, 1.0, -1.0], [-1.0, 1.0, 1.0], [1.0, -1.0, 1.0]]))
print 'BCC lattice constant = {0:1.3f} Ang'.format(
a * (11.8 / atoms.get_volume())**(1. / 3.))
x_label = "K_BT"
if is_lat_const:
x_label = "Lattice constant"
my_fig = plt.figure(0)
energies = [i/2 for i in energies]
if not is_lat_const:
plt.semilogx(changing_parameter, energies)
plt.semilogx(changing_parameter, energies,'*')
else:
plt.plot(changing_parameter, energies)
plt.plot(changing_parameter, energies,'*')
plt.xlabel(x_label)
plt.ylabel('Energy, eV')
my_fig.savefig(x_label + '_two_atoms', bbox_inches='tight')
plt.show()
#plot_changing_param_vs_energy(350,380,5,False,False,False,True)
#plot_changing_param_vs_energy(2,12,1,False,True,False,False)
#plot_changing_param_vs_energy(200,1200,100,True,False,False,False)
b = 1.5
bulk = Atoms([Atom('Cu', (0, 0, 0))],
cell=np.array([[b, b, 0.0],
[0.0, b, b],
[b, 0.0, b]]), pbc = True).repeat((1, 2, 1))
view(bulk)
from ase import Atoms, Atom
from jasp import *
import numpy as np
np.set_printoptions(precision=3, suppress=True)
co = Atoms([Atom('C', [0, 0, 0]), Atom('O', [1.2, 0, 0])], cell=(6., 6., 6.))
with jasp(
'molecules/simple-co', # output dir
xc='PBE', # the exchange-correlation functional
nbands=6, # number of bands
encut=350, # planewave cutoff
ismear=1, # Methfessel-Paxton smearing
sigma=0.01, # very small smearing factor for a molecule
atoms=co) as calc:
print 'energy = {0} eV'.format(co.get_potential_energy())
print co.get_forces()
def read_turbomole_gradient(f='gradient', index=-1):
""" Method to read turbomole gradient file """
# read entire file
lines = [x.strip() for x in f.readlines()]
# find $grad section
start = end = -1
for i, line in enumerate(lines):
if not line.startswith('$'):
continue
if line.split()[0] == '$grad':
start = i
elif start >= 0:
end = i
break
if end <= start:
raise RuntimeError('File does not contain a valid \'$grad\' section')
def formatError():
raise RuntimeError('Data format in file does not correspond to known '
'Turbomole gradient format')
# trim lines to $grad
del lines[:start+1]
del lines[end-1-start:]
# Interpret $grad section
from ase import Atoms, Atom
from ase.calculators.singlepoint import SinglePointCalculator
from ase.units import Bohr
images = []
while len(lines): # loop over optimization cycles
# header line
# cycle = 1 SCF energy = -267.6666811409 |dE/dxyz| = 0.157112
fields = lines[0].split('=')
try:
# cycle = int(fields[1].split()[0])
energy = float(fields[2].split()[0])
# gradient = float(fields[3].split()[0])
except (IndexError, ValueError):
formatError()
# coordinates/gradient
atoms = Atoms()
forces = []
for line in lines[1:]:
fields = line.split()
if len(fields) == 4: # coordinates
# 0.00000000000000 0.00000000000000 0.00000000000000 c
try:
symbol = fields[3].lower().capitalize()
position = tuple([Bohr * float(x) for x in fields[0:3] ])
except ValueError:
formatError()
atoms.append(Atom(symbol, position))
elif len(fields) == 3: # gradients
# -.51654903354681D-07 -.51654903206651D-07 0.51654903169644D-07
try:
grad = [float(x.replace('D', 'E')) * Bohr for x in fields[0:3] ]
except ValueError:
formatError()
forces.append(grad)
else: # next cycle
break
# calculator
calc = SinglePointCalculator(atoms, energy=energy, forces=forces)
atoms.set_calculator(calc)
# save frame
images.append(atoms)
# delete this frame from data to be handled
del lines[:2*len(atoms)+1]
return images[index]
slab.set_pbc((1, 1, 0))
slab.calc = EMT()
Z = slab.get_positions()[:, 2]
indices = [i for i, z in enumerate(Z) if z < Z.mean()]
constraint = FixAtoms(indices=indices)
slab.set_constraint(constraint)
dyn = QuasiNewton(slab)
dyn.run(fmax=0.05)
Z = slab.get_positions()[:, 2]
print Z[0] - Z[1]
print Z[1] - Z[2]
print Z[2] - Z[3]
b = 1.2
h = 1.5
slab += Atom('C', (d / 2, -b / 2, h))
slab += Atom('O', (d / 2, +b / 2, h))
s = slab.copy()
dyn = QuasiNewton(slab)
dyn.run(fmax=0.05)
#view(slab)
# Make band:
images = [slab]
for i in range(6):
image = slab.copy()
image.set_constraint(constraint)
image.calc = EMT()
images.append(image)
image[-2].position = image[-1].position
image[-1].x = d
def test_COCu111():
# Distance between Cu atoms on a (111) surface:
a = 3.6
d = a / sqrt(2)
fcc111 = Atoms(symbols='Cu',
cell=[(d, 0, 0), (d / 2, d * sqrt(3) / 2, 0),
(d / 2, d * sqrt(3) / 6, -a / sqrt(3))],
pbc=True)
slab = fcc111 * (2, 2, 2)
slab.set_cell([2 * d, d * sqrt(3), 1])
slab.set_pbc((1, 1, 0))
slab.calc = EMT()
Z = slab.get_positions()[:, 2]
indices = [i for i, z in enumerate(Z) if z < Z.mean()]
constraint = FixAtoms(indices=indices)
slab.set_constraint(constraint)
dyn = QuasiNewton(slab)
dyn.run(fmax=0.05)
Z = slab.get_positions()[:, 2]
print(Z[0] - Z[1])
print(Z[1] - Z[2])
print(Z[2] - Z[3])
b = 1.2
h = 1.5
slab += Atom('C', (d / 2, -b / 2, h))
slab += Atom('O', (d / 2, +b / 2, h))
dyn = QuasiNewton(slab)
dyn.run(fmax=0.05)
# Make band:
images = [slab]
for i in range(4):
image = slab.copy()
# Set constraints and calculator:
image.set_constraint(constraint)
image.calc = EMT()
images.append(image)
# Displace last image:
image = images[-1]
image[-2].position = image[-1].position
image[-1].x = d
image[-1].y = d / sqrt(3)
dyn = QuasiNewton(images[-1])
dyn.run(fmax=0.05)
neb = NEB(images, climb=not True)
# Interpolate positions between initial and final states:
neb.interpolate(method='idpp')
for image in images:
print(image.positions[-1], image.get_potential_energy())
dyn = BFGS(neb, maxstep=0.04, trajectory='mep.traj')
dyn.run(fmax=0.1)
for image in images:
print(image.positions[-1], image.get_potential_energy())
# Trying to read description of optimization from trajectory
traj = Trajectory('mep.traj')
assert traj.description['optimizer'] == 'BFGS'
for key, value in traj.description.items():
print(key, value)
print(traj.ase_version)
def load_xyz(filename='xyz.in', atom_types=None):
"""
Reads and returns the structure input file from GPUMD.
Args:
filename (str):
Name of structure file
atom_types (list(str)):
List of atom types (elements).
Returns:
tuple: atoms, M, cutoff
atoms (ase.Atoms):
ASE atoms object with x,y,z, mass, group, type, cell, and PBCs
from input file. group is stored in tag, atom type may not
correspond to correct atomic symbol
M (int):
Max number of neighbor atoms
cutoff (float):
Initial cutoff for neighbor list build
"""
# read file
with open(filename) as f:
xyz_lines = f.readlines()
# get global structure params
l1 = tuple(xyz_lines[0].split()) # first line
N, M, use_triclinic, has_velocity, \
num_of_groups = [int(val) for val in l1[:2]+l1[3:]]
cutoff = float(l1[2])
l2 = tuple(xyz_lines[1].split()) # second line
if use_triclinic:
pbc, cell = [int(val) for val in l2[:3]], [float(val) for val in l2[3:]]
else:
pbc, L = [int(val) for val in l2[:3]], [float(val) for val in l2[3:]]
# get atomic params
info = dict()
atoms = Atoms()
atoms.set_pbc((pbc[0], pbc[1], pbc[2]))
if use_triclinic:
atoms.set_cell(np.array(cell).reshape((3,3)))
else:
atoms.set_cell([(L[0], 0, 0), (0, L[1], 0), (0, 0, L[2])])
for index, line in enumerate(xyz_lines[2:]):
data = dict()
lc = tuple(line.split()) # current line
type_, mass = int(lc[0]), float(lc[4])
position = [float(val) for val in lc[1:4]]
atom = Atom(type_, position, mass=mass)
lc = lc[5:] # reduce list length for easier indexing
if has_velocity:
velocity = [float(val) for val in lc[:3]]
lc = lc[3:]
data['velocity'] = velocity
if num_of_groups:
groups = [int(group) for group in lc]
data['groups'] = groups
atoms.append(atom)
info[index] = data
atoms.info = info
if atom_types:
__set_atoms(atoms, atom_types)
return atoms, M, cutoff
from ase import Atom, Atoms
from gpaw import GPAW
from gpaw.test import equal
a = 5.0
d = 1.0
x = d / 3**0.5
atoms = Atoms([
Atom('C', (0.0, 0.0, 0.0)),
Atom('H', (x, x, x)),
Atom('H', (-x, -x, x)),
Atom('H', (x, -x, -x)),
Atom('H', (-x, x, -x))
],
cell=(a, a, a),
pbc=False)
atoms.positions[:] += a / 2
calc = GPAW(h=0.25, nbands=4, convergence={'eigenstates': 1e-11})
atoms.set_calculator(calc)
energy = atoms.get_potential_energy()
niter = calc.get_number_of_iterations()
# The three eigenvalues e[1], e[2], and e[3] must be degenerate:
e = atoms.get_calculator().wfs.kpt_u[0].eps_n
print e[1] - e[3]
equal(e[1], e[3], 9.3e-8)
energy_tolerance = 0.0003
niter_tolerance = 0
equal(energy, -23.6277, energy_tolerance)
def lattice_alteration_nn(indiv, Optimizer):
"""Move function to perform random move along random axis for nearest neighbor distance to random atoms
Inputs:
indiv = Individual class object to be altered
Optimizer = Optimizer class object with needed parameters
Outputs:
indiv = Altered Individual class object
"""
if 'MU' in Optimizer.debug:
debug = True
else:
debug = False
if Optimizer.structure=='Defect':
if Optimizer.isolate_mutation:
indc,indb,vacant,swaps,stro = find_defects(indiv[0],Optimizer.solidbulk,0)
ind = indc.copy()
ind.extend(indb)
else:
ind=indiv[0].copy()
indc=indiv[0].copy()
else:
ind=indiv[0].copy()
indc=indiv[0].copy()
if len(indc) != 0:
ctoff1 = [1.0 for one in ind]
nl = NeighborList(ctoff1, bothways=True, self_interaction=False)
nl.update(ind)
try:
natomsmove=random.randint(1,len(indc)/2)
except ValueError:
natomsmove=1
passn=0
for count in range(natomsmove):
try:
indexmv = random.choice([i for i in range(len(indc))])
indices, offsets = nl.get_neighbors(indexmv)
nns = Atoms()
nns.append(ind[indexmv])
for index, d in zip(indices,offsets):
index = int(index)
pos = ind[index].position + numpy.dot(d,ind.get_cell())
nns.append(Atom(symbol=ind[index].symbol, position=pos))
dist = [nns.get_distance(0,i) for i in range(1, len(nns))]
r = sum(dist)/len(dist)
dir = random.choice([[1,0,0],[-1,0,0],[0,1,0],[0,-1,0],[0,0,1],[0,0,-1]])
ind[indexmv].position += [i*r for i in dir]
except:
passn+=1
indiv[0]=ind.copy()
else:
natomsmove=0
passn=0
Optimizer.output.write('Lattice Alteration NN Mutation performed on individual\n')
Optimizer.output.write('Index = '+repr(indiv.index)+'\n')
natomsmove-=passn
Optimizer.output.write('Number of atoms moved = '+repr(natomsmove)+'\n')
Optimizer.output.write(repr(indiv[0])+'\n')
muttype='LANN'+repr(natomsmove)
if indiv.energy==0:
indiv.history_index=indiv.history_index+'m'+muttype
else:
indiv.history_index=repr(indiv.index)+'m'+muttype
return indiv
from ase.calculators.vasp import *
import matplotlib.pyplot as plt
from ase.constraints import FixAtoms
from matplotlib import mlab
from numpy import *
from ase.utils.eos import EquationOfState
from ase.lattice.cubic import BodyCenteredCubic
from ase import Atom
a = 2.87
cell = [[1, 0, 0], [0, 1, 0], [0, 0, 1]]
atoms = BodyCenteredCubic('Fe', directions=cell)
atoms.set_initial_magnetic_moments([5, 5])
carbon = Atom('C', position=(0, 0.5 * a, 0.75 * a), charge=0.4)
atoms = atoms * (2, 2, 2) + carbon
#atoms = atoms*(2,2,2)
constraint = FixAtoms(indices=[5, 7, 8, 10, 12, 13, 14, 15, 16])
atoms.set_constraint(constraint)
view(atoms)
def save(filename, arg):
f = open(filename, 'a+t')
f.write('{0} \n'.format(arg))
f.close()
def test_show_ase():
from ase import Atom, Atoms
dimer = Atoms([Atom('X', (0, 0, 0)), Atom('X', (0, 0, 1))])
dimer.set_positions([(1, 2, 3), (4, 5, 6.2)])
nv.show_ase(dimer)
from ase import Atoms, Atom
from ase.lattice.surface import fcc110
from ase.optimize.minimahopping import MinimaHopping
from ase.calculators.emt import EMT
from ase.constraints import FixAtoms, Hookean
# Make the Pt 110 slab.
atoms = fcc110('Pt', (2, 2, 2), vacuum=7.)
# Add the Cu2 adsorbate.
adsorbate = Atoms([
Atom('Cu', atoms[7].position + (0., 0., 2.5)),
Atom('Cu', atoms[7].position + (0., 0., 5.0))
])
atoms.extend(adsorbate)
# Constrain the surface to be fixed and a Hookean constraint between
# the adsorbate atoms.
constraints = [
FixAtoms(indices=[atom.index for atom in atoms if atom.symbol == 'Pt']),
Hookean(a1=8, a2=9, rt=2.6, k=15.),
Hookean(a1=8, a2=(0., 0., 1., -15.), k=15.),
]
atoms.set_constraint(constraints)
# Set the calculator.
calc = EMT()
atoms.set_calculator(calc)
# Instantiate and run the minima hopping algorithm.
hop = MinimaHopping(atoms, Ediff0=2.5, T0=4000.)
from ase import Atoms, Atom
from jasp import *
JASPRC['queue.ppn'] = 4
atoms = Atoms([
Atom('H', [0.5960812, -0.7677068, 0.0000000]),
Atom('O', [0.0000000, 0.0000000, 0.0000000]),
Atom('H', [0.5960812, 0.7677068, 0.0000000])
],
cell=(8, 8, 8))
atoms.center()
with jasp(
'molecules/h2o-relax-centered',
xc='PBE',
debug=logging.DEBUG,
encut=400,
ismear=0, # Gaussian smearing
ibrion=2,
ediff=1e-8,
nsw=10,
atoms=atoms) as calc:
print("forces")
print('=======')
print(atoms.get_forces())
def set_atomic_number(self, number):
Atom.set(self, 'number', number)
self._mark()
def update_charges_van_der_waals(self):
"""Updates the atomic charges by using the electron density within a
sphere of van Der Waals radius.
The charge for each atom in the system is integrated from the electron
density inside the van Der Waals radius of the atom in hand. The link
atoms will affect the distribution of the electron density.
"""
self.timer.start("van Der Waals charge calculation")
# Turn debugging on or off here
debugging = False
atoms_with_links = self.atoms_for_subsystem
calc = self.calculator
# The electron density is calculated from the system with link atoms.
# This way the link atoms can modify the charge distribution
calc.set_atoms(atoms_with_links)
if self.charge_source == "pseudo":
try:
density = np.array(calc.get_pseudo_density())
except AttributeError:
error("The DFT calculator on subsystem \"" + self.name + "\" doesn't provide pseudo density.")
if self.charge_source == "all-electron":
try:
density = np.array(calc.get_all_electron_density(gridrefinement=1))
except AttributeError:
error("The DFT calculator on subsystem \"" + self.name + "\" doesn't provide all electron density.")
# Write the charge density as .cube file for VMD
if debugging:
write('nacl.cube', atoms_with_links, data=density)
grid = self.density_grid
if debugging:
debug_list = []
# The link atoms are at the end of the list
n_atoms = len(atoms_with_links)
projected_charges = np.zeros((1, n_atoms))
for i_atom, atom in enumerate(atoms_with_links):
r_atom = atom.position
z = atom.number
# Get the van Der Waals radius
R = ase.data.vdw.vdw_radii[z]
# Create a 3 x 3 x 3 x 3 array that can be used for vectorized
# operations with the density grid
r_atom_array = np.tile(r_atom, (grid.shape[0], grid.shape[1], grid.shape[2], 1))
diff = grid - r_atom_array
# Numpy < 1.8 doesn't recoxnize axis argument on norm. This is a
# workaround for diff = np.linalg.norm(diff, axis=3)
diff = np.apply_along_axis(np.linalg.norm, 3, diff)
indices = np.where(diff <= R)
densities = density[indices]
atom_charge = np.sum(densities)
projected_charges[0, i_atom] = atom_charge
if debugging:
debug_list.append((atom, indices, densities))
#DEBUG: Visualize the grid and contributing grid points as atoms
if debugging:
d = Atoms()
d.set_cell(atoms_with_links.get_cell())
# Visualize the integration spheres with atoms
for point in debug_list:
atom = point[0]
indices = point[1]
densities = point[2]
d.append(atom)
print "Atom: " + str(atom.symbol) + ", Density sum: " + str(np.sum(densities))
print "Density points included: " + str(len(densities))
for i in range(len(indices[0])):
x = indices[0][i]
y = indices[1][i]
z = indices[2][i]
a = Atom('H')
a.position = grid[x, y, z, :]
d.append(a)
view(d)
# Normalize the projected charges according to the electronic charge in
# the whole system excluding the link atom to preserve charge neutrality
atomic_numbers = np.array(atoms_with_links.get_atomic_numbers())
total_electron_charge = -np.sum(atomic_numbers)
total_charge = np.sum(np.array(projected_charges))
projected_charges *= total_electron_charge/total_charge
# Add the nuclear charges and initial charges
projected_charges += atomic_numbers
# Set the calculated charges to the atoms. The call for charges was
# changed between ASE 3.6 and 3.7
try:
self.atoms_for_interaction.set_initial_charges(projected_charges[0, :].tolist())
except:
self.atoms_for_interaction.set_charges(projected_charges[0, :].tolist())
self.pseudo_density = density
self.timer.stop()
